• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 75-2:2013

Current
Current

The latest, up-to-date edition.

Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

French, English, Russian

Published date

09-04-2013

ISO 75-2:2013 specifies three methods, using different values of constant flexural stress, which can be used for the determination of the temperature of deflection under load of plastics (including filled plastics and fibre-reinforced plastics in which the fibre length, prior to processing, is up to 7,5 mm) and ebonite:

  • method A, using a flexural stress of 1,80 MPa;
  • method B, using a flexural stress of 0,45 MPa;
  • method C, using a flexural stress of 8,00 MPa.

Committee
ISO/TC 61/SC 2
DevelopmentNote
Supersedes ISO 75 (04/2001) Supersedes ISO/DIS 75-2. (04/2013)
DocumentType
Standard
Pages
8
PublisherName
International Organization for Standardization
Status
Current
Supersedes

I.S. EN 13121-3:2016 GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP
I.S. EN ISO 10350-1:2017 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS (ISO 10350-1:2017)
BS EN ISO 16396-2:2017 Plastics. Polyamide (PA) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN 16506:2014 Systems for renovation of drains and sewers. Lining with a rigidly anchored plastics inner layer (RAPL)
SAE J 1639 : 1995(S2017) CLASSIFICATION SYSTEM FOR AUTOMOTIVE POLYAMIDE (PA) PLASTICS
UNE-EN ISO 9988-2:2015 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006)
PREN ISO 7792-2 : DRAFT 2011 PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 7792-2:2012 PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 7792-2:2012)
ISO 16611:2017 Plastics piping systems for drainage and sewerage without pressure — Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) — Dimensions, requirements and tests
DIN EN 16506 E : 2014 SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL)
05/30132990 DC : DRAFT APR 2005 ISO 20753 - PLASTICS - TEST SPECIMENS
08/30170332 DC : DRAFT JAN 2008 BS EN ISO 8986-2 - PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 6402-2 : 94 AMD 10652
16/30334902 DC : 0 BS EN ISO 10350-1 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS
10/30212123 DC : 0 BS EN 845-1 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS
I.S. EN ISO 16396-2:2017 PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 16396-2:2017)
17/30349217 DC : 0 BS EN ISO 21970-2 - PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN 16506:2014-12 SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL)
UNE-EN ISO 19069-2:2016 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016)
BS EN 4702-05:2017 Aerospace series. Quick release fastening systems for non-structural and lining applications Retaining washer
BS EN 61036:1997 Alternating current static watt-hour meters for active energy (classes 1 and 2)
BS ISO 8605:2001 Textile-glass-reinforced plastics. Sheet moulding compound (SMC). Basis for specification
05/30091855 DC : DRAFT MAR 2005 ISO 1874-2 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
15/30315534 DC : 0 BS EN ISO 16396-2 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
04/30115317 DC : 0 BS EN ISO 10350-1 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS
16/30338304 DC : 0 BS ISO/ASTM 52903-1 - ADDITIVE MANUFACTURING - STANDARD SPECIFICATION FOR MATERIAL EXTRUSION BASED ADDITIVE MANUFACTURING OF PLASTIC MATERIALS - PART 1: FEEDSTOCK MATERIALS
BS ISO 20753 : 2008 PLASTICS - TEST SPECIMENS
07/30152076 DC : 0 BS ISO 25137-2 - PLASTICS - SULFONE PLASTICS (SP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
03/102124 DC : 0 EN 14636-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE DRAINAGE AND SEWERAGE - POLYESTER RESIN CONCRETE (PRC) - PART 1: PIPES AND FITTINGS WITH FLEXIBLE JOINTS
UNE-EN ISO 17855-2:2016 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016)
PREN 2719 : 200P1 AEROSPACE SERIES - POLYCARBONATE SHEET - TECHNICAL SPECIFICATION
DIN EN ISO 16396-2:2017-07 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017)
PREN 13160-7 : DRAFT 2014 LEAK DETECTION SYSTEMS - PART 7: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR INTERSTITIAL SPACES, LEAK DETECTION LININGS AND LEAK DETECTION JACKETS
DIN EN ISO 25137-2 E : 2017 PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 25137-2:2009)
ASTM D 648 : 2016 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
PREN 4243 : 200P1 AEROSPACE SERIES - CAST ACRYLIC SHEETS - TECHNICAL SPECIFICATION
PREN 4364 : 200P1 AEROSPACE SERIES - CAST ACRYLIC - PROPERTIES
ISO 17558:2006 Steel wire ropes Socketing procedures Molten metal and resin socketing
BS EN ISO 12215-1:2000 Small craft. Hull construction and scantlings Materials. Thermosetting resins, glass-fibre reinforcement, reference laminate
ISO 20557-2:2018 Plastics — Poly(phenylene ether) (PPE) moulding and extrusion materials — Part 2: Preparation of test specimen and determination of properties
S.R. CEN TS 15534-1:2007 WOOD-PLASTICS COMPOSITES (WPC) - PART 1: TEST METHODS FOR CHARACTERISATION OF WPC MATERIALS AND PRODUCTS
I.S. EN ISO 20753:2014 PLASTICS - TEST SPECIMENS (ISO 20753:2008)
I.S. EN ISO 20029-2:2018 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES (ISO 20029-2:2017)
SAE J 2642 : 2017 RECOMMENDED PRACTICE FOR DEVELOPING SPECIFICATIONS FOR AUTOMOTIVE THERMOPLASTIC MATERIALS
EN ISO 9093-2:2002 Small craft - Seacocks and through-hull fittings - Part 2: Non-metallic (ISO 9093-2:2002)
ISO 7823-2:2003 Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Extruded sheets
ASTM D 5945 : 1996 Test Method for Determination of Temperature of Deflection Under Load for Plastics and Ebonite (Withdrawn 1998)
NACE RP 03 04 : 2004 DESIGN, INSTALLATION, AND OPERATION OF THERMOPLASTIC LINERS FOR OILFIELD PIPELINES
ASTM D 6779 : 2017 : REDLINE Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)
DIN EN ISO 20753:2014-07 PLASTICS - TEST SPECIMENS (ISO 20753:2008)
ASTM D 6778 : 2014 : REDLINE Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM)
I.S. EN ISO 11963:2012 PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012)
I.S. EN ISO 11833-1:2012 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM (ISO 11833-1:2012)
DIN EN ISO 15103-2:2007-09 PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 4613-2:2004-12 PLASTICS - ETHYLENE/VINYL ACETATE (E/VAC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 3673-2 E : 2012 PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES OF CROSSLINKED EPOXY RESINS (ISO 3673-2:2012)
DIN EN 13558:2003-12 SPECIFICATIONS FOR IMPACT MODIFIED EXTRUDED ACRYLIC SHEETS FOR SHOWER TRAYS FOR DOMESTIC PURPOSES
DIN EN 14364 E : 2013 PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - SPECIFICATIONS FOR PIPES, FITTINGS AND JOINTS
EN 13121-1:2003 GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - SPECIFICATION CONDITIONS AND ACCEPTANCE CONDITIONS
DIN EN ISO 8257-2 E : 2006 PLASTICS - POLY(METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN 14598-2:2005-07 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements
DIN EN 14598-1:2005-07 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 1: Designation
BS EN ISO 4613-2:1995 Plastics. Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 13628-2:2006 Petroleum and natural gas industries. Design and operation of subsea production systems Unbonded flexible pipe systems for subsea and marine applications
BS EN 13559:2003 Specifications for impact modified coextruded ABS/Acrylic sheets for baths and shower trays for domestic purposes
BS EN ISO 11833-2:2006 Plastics. Unplasticized poly(vinyl chloride) sheets. Types, dimensions and characteristics Sheets of thickness less than 1 mm
BS EN ISO 11542-2 : 1999 PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN ISO 1622-2:1999 Plastics. Polystrene (PS) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN 13677-2:2003 Reinforced thermoplastic moulding compounds. Specification for GMT Methods of test and general requirements
UNE-EN 16245-2:2014 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers
BS EN ISO 15252-1:2000 Plastics. Epoxy powder moulding compounds (EP-PMCs) Designation system and basis for specifications
13/30238229 DC : 0 BS EN 62052-31 - ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TEST AND TEST CONDITIONS - PART 31: PRODUCT SAFETY REQUIREMENTS
ISO 15103-2:2007 Plastics Poly(phenylene ether) (PPE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN ISO 14526-1:2000 Plastics. Phenolic powder moulding compounds (PF-PMCs) Designation system and basis for specifications
BS EN ISO 3167:2014 Plastics. Multipurpose test specimens
ISO 19069-2:2016 Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
BS EN ISO 2580-2:2003 Plastics. Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials Preparation of test specimens and determination of properties
DIN EN ISO 1872-2:2000-12 PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 7823-1:2003 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS
I.S. EN ISO 2580-2:2004 PLASTICS - ACRYLONITRILE/BUTADIENE/STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PART 2 - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 62052-31:2016 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests
ONORM EN ISO 11296-4 : 2011 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 4: LINING WITH CURED-IN-PLACE PIPES
EN 61268:1996 Alternating current static var-hour meters for reactive energy (classes 2 and 3)
EN 13558:2003 Specifications for impact modified extruded acrylic sheets for shower trays for domestic purposes
DIN EN 13923:2006-02 Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing
CEN/TS 15534-1:2007 Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products
DIN EN ISO 8257-2:2006-06 PLASTICS - POLY(METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
NF EN ISO 11833-1 : 2012 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM
NF EN ISO 8986-2 : 2010 PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 3672-2:2002-07 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 13160-7:2016 Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets
EN 13121-3:2016 GRP tanks and vessels for use above ground - Part 3: Design and workmanship
DIN EN ISO 17855-2 E : 2016 PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016)
PREN 14364 : DRAFT 2011 PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - SPECIFICATIONS FOR PIPES, FITTINGS AND JOINTS
02/103631 DC : DRAFT MAY 2002 BS EN 14471 - CHIMNEYS - REQUIREMENTS AND TEST METHODS FOR SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS
ONORM EN ISO 11542-2 : 2009 PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN 4702-03:2017 AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 03: STUD - QUICK-RELEASE AND LOCKING
ISO 15840:2004 Ships and marine technology Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications
I.S. EN ISO 12086-2:2006 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ISO 25780:2011 Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Pipes with flexible joints intended to be installed using jacking techniques
14/30304058 DC : 0 BS EN ISO 17855-2 - PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNE-EN 14636-1:2010 Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC) - Part 1: Pipes and fittings with flexible joints
17/30345075 DC : 0 BS EN ISO 11296-4 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 4: LINING WITH CURED-IN-PLACE PIPES
12/30266170 DC : 0 BS EN 15534-1 - COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1 : TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
BS IEC 61624:1997 Guidance on the development of lists of maximum allowable temperatures for polymeric compounds used in electrotechnical equipment
ISO 11963:2012 Plastics Polycarbonate sheets Types, dimensions and characteristics
11/30239977 DC : 0 BS EN 16245-2 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: ADDITIONAL REQUIREMENTS FOR RESINS, CURING SYSTEMS, ADDITIVES AND MODIFIERS
DIN EN 16245-2:2013-08 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers
BS EN ISO 20028-2:2017 Plastics. Thermoplastic polyester (TP) moulding and extrusion materials Preparation of test specimens and determination of properties
BS ISO 11833-2 : 1998 AMD 16032 PLASTICS - UNPLASTICIZED POLY (VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - SHEETS OF THICKNESS LESS THAN 1 MM
BS 7825-3.1:1997 Calibration of rubber and plastics test equipment. Calibration schedules Thermal properties
15/30328410 DC : DRAFT JULY 2015 BS EN 62052-11/AMD1 - ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 11: METERING EQUIPMENT
98/123516 DC : DRAFT JULY 1998 PREN 13121-1 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - ACCEPTANCE CONDITIONS AND USAGE CONDITIONS
I.S. EN ISO 19069-2:2016 PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 19069-2:2016)
17/30315814 DC : 0 BS EN ISO 11297-4 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND DRAINAGE AND SEWERAGE NETWORKS UNDER PRESSURE - PART 4: LINING WITH CURED-IN-PLACE PIPES
11/30246455 DC : 0 BS EN 1796 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP)
CSA C22.2 No. 0.17 : 2000 : R2013 EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
PREN 13411-4 : DRAFT 2009 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 4: METAL RESIN SOCKETING
UNI EN 14364 : 2013 PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - SPECIFICATIONS FOR PIPES, FITTINGS AND JOINTS
EN 4702-05:2017 Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 05: Retaining washer
14/30301266 DC : 0 BS EN 13160-7 - LEAK DETECTION SYSTEMS - PART 7: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR INTERSTITIAL SPACES, LEAK DETECTION LININGS AND LEAK DETECTION JACKETS
DIN EN ISO 19069-2:2016-07 PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 19069-2:2016)
BS ISO 2897-2 : 1994 AMD 10661 PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 7391-2 : 1996 AMD 10746 PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 4894-2 : AMD 10662 PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
08/30138102 DC : DRAFT MAR 2008 BS ISO 25780 - PLASTICS PIPING SYSTEMS FOR PRESSURE AND NON-PRESSURE WATER SUPPLY, IRRIGATION, DRAINAGE OR SEWERAGE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN - PIPES WITH FLEXIBLE JOINTS INTENDED TO BE INSTALLED USING JACKING TECHNIQUES
DD CEN/TS 15534-1:2007 Wood-plastics composites (WPC) Test methods for characterisation of WPC materials and products
BS ISO 8257-2:1990 Plastics. Poly(methyl methacrylate) (PMMA) moulding and extrusion materials Preparation of test specimens and determination of properties
BS ISO 14910-2 : 1997 AMD 16024 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
PREN 4365 : 200P1 AEROSPACE SERIES - HEAT AND CRAZING RESISTANT CAST ACRYLIC, CROSSLINKED, AND LOW MOISTURE ABSORPTION - PROPERTIES
API 17L1 : 2013 SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
PREN ISO 75-1 : DRAFT 2012 PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD PART 1: GENERAL TEST METHOD (ISO/DIS 75-1:2012)
ISO 14910-2:2013 Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 2: Preparation of test specimens and determination of properties
DIN EN ISO 11296-4:2011-07 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 4: LINING WITH CURED-IN-PLACE PIPES
BS ISO 28078-2:2009 Plastics. Poly(phenylene sulfide) (PPS) moulding and extrusion materials Preparation of test specimens and determination of properties
ISO 20029-2:2017 Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 2: Preparation of test specimens and determination of properties
I.S. EN ISO 20028-2:2017 PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017)
I.S. EN ISO 7391-2:2006 PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 50470-1:2006 Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C)
UNI EN 1796 : 2013 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP)
BS EN ISO 20753:2014 Plastics. Test specimens
BS EN 62052-21 : 2004 ELECTRICITY METERING EQUIPMENT (A.C.) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT (IEC 62052-21:2004)
NF EN ISO 11296-4 : 2011 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 4: LINING WITH CURED-IN-PLACE PIPES
UNI EN ISO 11833-1 : 2012 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM
ISO 11833-1:2012 Plastics Unplasticized poly(vinyl chloride) sheets Types, dimensions and characteristics Part 1: Sheets of thickness not less than 1 mm
DIN EN ISO 20753 E : 2014 PLASTICS - TEST SPECIMENS (ISO 20753:2008)
ISO 28078-2:2009 Plastics Poly(phenylene sulfide) (PPS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
IEC 60598-1:2014+AMD1:2017 CSV Luminaires - Part 1: General requirements and tests
UNE-EN ISO 25137-2:2017 Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 25137-2:2009)
UNE-EN ISO 20028-2:2017 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20028-2:2017)
(INACTIVE RECORD)ASTM D 5336 : 2015-04 CLASSIFICATION SYSTEM AND BASIS FOR SPECIFICATION FOR POLYPHTHALAMIDE (PPA) INJECTION MOLDING MATERIALS
CSA C22.2 No. 0.17 : 2000 EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
ASTM D 4000 : 2016 : REDLINE Standard Classification System for Specifying Plastic Materials
EN 14636-1:2009 Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC) - Part 1: Pipes and fittings with flexible joints
DIN EN ISO 1874-2:2013-03 PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 1874-2:2012)
DIN EN ISO 8986-2 E : 2010 PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 14530-2:2000-08 Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999); German version EN ISO 14530-2:1999
DIN EN 14364:2013-05 Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints
DIN EN ISO 2580-2:2004-05 PLASTICS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN ISO 15526-2:2004 Plastics. Polyketone (PK) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN 13566-4:2002 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with cured-in-place pipes
ISO 7823-3:2007 Plastics Poly(methyl methacrylate) sheets Types, dimensions and characteristics Part 3: Continuous cast sheets
BS EN ISO 1874-2:2012 Plastics. Polyamide (PA) moulding and extrusion materials Preparation of test specimens and determination of properties
ISO 17885:2015 Plastics piping systems Mechanical fittings for pressure piping systems Specifications
BS EN ISO 14528-2:2000 Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs) Preparation of test specimens and determination of properties
BS EN ISO 7823-3:2007 Plastics. Poly(methacrylate) sheets. Types, dimensions and characteristics Continuous cast sheets
BS EN ISO 1872-2:2007 Plastics. Polyethylene (PE) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN 14598-2:2005 Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Methods of test and general requirements
I.S. EN ISO 15526-2:2004 PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN 13160-7:2016 LEAK DETECTION SYSTEMS - PART 7: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR INTERSTITIAL SPACES, LEAK DETECTION LININGS AND LEAK DETECTION JACKETS
I.S. EN ISO 13628-2:2006 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
DIN EN ISO 7391-2:2006-06 PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 11833-1:2012-11 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM (ISO 11833-1:2012)
I.S. EN ISO 3167:2014 PLASTICS - MULTIPURPOSE TEST SPECIMENS (ISO 3167:2014)
I.S. EN ISO 8257-2:2006 PLASTICS - POLY(METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 14663-2:2006 PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN 1796:2013-05 Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)
I.S. EN ISO 15103-2:2007 PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 11963:2012 Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2012)
I.S. EN ISO 4894-2:1999 PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 11833-2:2006-06 Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2: Sheets of thickness less than 1 mm (ISO 11833-2:1998)
I.S. EN 13411-4:2011 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 4: METAL AND RESIN SOCKETING
I.S. EN ISO 3673-2:2012 PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES OF CROSSLINKED EPOXY RESINS (ISO 3673-2:2012)
I.S. EN ISO 11542-2:1999 PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 11963:2013-03 PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012)
I.S. EN 1796:2013 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP)
DIN EN ISO 1873-2:2000-12 PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 15526-2:2004-10 PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN 14364:2013 PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - SPECIFICATIONS FOR PIPES, FITTINGS AND JOINTS
I.S. EN ISO 1874-2:2012 PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 1874-2:2012)
DIN EN 13121-3:2016-10 GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP
EN ISO 11542-2:1998/AC:2008 PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 10366-2:2004 PLASTICS - METHYL METHACRYLATE-ACRYLONITRILE-BUTADIENE-STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 7823-3:2007 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 3: CONTINUOUS CAST SHEETS
UNI EN 13411-4 : 2011 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 4: METAL AND RESIN SOCKETING
EN 4691-1:2017 Aerospace series - Tie rod with integrated bolts - Part 1: Technical specification
ISO 10467:2004 Plastics piping systems for pressure and non-pressure drainage and sewerage Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
UNI EN 14636-1 : 2010 PLASTICS PIPING SYSTEMS FOR NON- PRESSURE DRAINAGE AND SEWERAGE - POLYESTER RESIN CONCRETE (PRC) - PART 1: PIPES AND FITTINGS WITH FLEXIBLE JOINTS
BS EN 4702-03:2017 Aerospace series. Quick release fastening systems for non-structural and lining applications Stud - quick-release and locking
BS EN ISO 25137-2:2017 Plastics. Sulfone polymer moulding and extrusion materials Preparation of test specimens and determination of properties
I.S. EN ISO 2897-2:2004 PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
15/30327856 DC : 0 BS ISO 20558-2 - PLASTICS - POLY(PHENYLENE SULFIDE) (PPS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES
12/30255878 DC : 0 BS ISO 17885 - PLASTICS PIPING SYSTEMS - MECHANICAL FITTINGS FOR PRESSURE PIPING SYSTEMS - SPECIFICATIONS
10/30191247 DC : DRAFT APR 2010 BS EN ISO 13628-16 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 16: SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
14/30304062 DC : 0 BS EN ISO 19069-2 - PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
11/30236286 DC : 0 BS EN ISO 11963 - PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS
17/30349214 DC : 0 BS EN ISO 21970-1 - PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
02/208921 DC : DRAFT AUG 2002 IEC 62052-21 ED.1 - ELECTRICITY METERING EQUIPMENT (A.C.) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT
02/713763 DC : DRAFT DEC 2002 ISO 15840 - SHIPS AND MARINE TECHNOLOGY - STANDARD SPECIFICATION FOR THERMOSETTING RESIN FIBREGLASS PIPE AND FITTINGS TO BE USED FOR MARINE APPLICATIONS
15/30304408 DC : 0 BS EN ISO 20029-2 - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
11/30192003 DC : 0 BS EN ISO 7792-2 - PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN ISO 17855-2:2016 Plastics. Polyethylene (PE) moulding and extrusion materials Preparation of test specimens and determination of properties
PREN 16506 : DRAFT 2012 SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL)
UNI EN 16506 : 2014 SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL)
CSA C22.2 No. 0.17 : 2000 : R2004 EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
BS ISO 25780:2011 Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage. Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin. Pipes with flexible joints intended to be installed using jacking techniques
11/30246458 DC : 0 BS EN 14364 - PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - SPECIFICATIONS FOR PIPES, FITTINGS AND JOINTS
15/30328314 DC : 0 BS EN ISO 20557-2 - PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES
DIN EN ISO 9988-2 E : 2015 PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 9988-2:2006)
BS EN 14636-2:2009 Plastics piping systems for non-pressure drainage and sewerage. Polyester resin concrete (PRC) Manholes and inspection chambers
12/30238122 DC : 0 BS EN ISO 75-1 - PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 1: GENERAL TEST METHOD (ISO/DIS 75-1:2012)
BS ISO 3672-2 : 2000 AMD 13326 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
12/30263853 DC : 0 BS EN 4702-03 - AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - STUD - QUICK-RELEASE AND LOCKING
BS ISO 10366-2 : 94 AMD 10665 PLASTICS - METHYL METHYLACRYLATE/ACRYLONITRILE/BUTADIENE/STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
CEI EN 62052-21 : 2005 ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT
BS ISO 2580-2 : 94 AMD 10660 PLASTICS - ACRYLONITRILE/BUTADIENE/STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 1163-2 : 1995 AMD 10744 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) MOULDING AND EXTRUSION MATERIALS
00/120644 DC : DRAFT FEB 2000 ISO/DIS 10639-2 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS - (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN
08/30165044 DC : DRAFT FEB 2008 BS ISO 28078-2 - PLASTICS - POLY(PHENYLENE SULFIDE) (PPS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
PREN 15269-20 : DRAFT 2017 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 20: SMOKE CONTROL FOR DOORS, SHUTTERS AND OPENABLE WINDOWS
EN 4702-03 : 2017 AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 03: STUD - QUICK-RELEASE AND LOCKING
I.S. EN ISO 11296-4:2018 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 4: LINING WITH CURED-IN-PLACE PIPES (ISO 11296-4:2018)
EN 1796:2013 Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)
ISO 20558-2:2018 Plastics — Poly(phenylene sulfide) (PPS) moulding and extrusion materials — Part 2: Preparation of test specimen and determination of properties
I.S. EN ISO 14910-2:2013 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013, CORRECTED VERSION 2015-12-15)
NF EN 62052-11 : 2003 AMD 1 2017 ELECTRICITY METERING EQUIPMENT (A.C.) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 11: METERING EQUIPMENT
UNI EN ISO 11296-4 : 2011 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 4: LINING WITH CURED-IN-PLACE PIPES
UNI EN ISO 20753 : 2014 PLASTICS - TEST SPECIMENS
ONORM EN ISO 14910-2 : 2013 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013)
I.S. EN 50470-1:2006 ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C)
I.S. EN 14636-1:2009 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE DRAINAGE AND SEWERAGE - POLYESTER RESIN CONCRETE (PRC) - PART 1: PIPES AND FITTINGS WITH FLEXIBLE JOINTS
I.S. EN 4691-1:2017 AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION
BS EN 13121-3:2016 GRP tanks and vessels for use above ground Design and workmanship
I.S. EN ISO 17855-2:2016 PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016)
I.S. EN 16245-2:2013 FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS
ASTM D 4673 : 2016 : REDLINE Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials
ISO 11296-4:2018 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 4: Lining with cured-in-place pipes
ISO 12215-1:2000 Small craft — Hull construction and scantlings — Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate
I.S. EN 61036:1997 ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2)
UNE-EN 13121-3:2017 GRP tanks and vessels for use above ground - Part 3: Design and workmanship
ASTM D 5857 : 2017 : REDLINE Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology
ASTM D 6339 : 2011 Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS)
UNE-EN 13411-4:2011 Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing
EN ISO 7391-2:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:2006)
EN ISO 20029-2:2018 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimen and determination of properties (ISO 20029-2:2017)
ISO 8605:2001 Textile-glass-reinforced plastics — Sheet moulding compound (SMC) — Basis for a specification
I.S. EN ISO 8986-2:2009 PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNE-EN 13160-7:2017 Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets
DIN EN ISO 3672-2 E : 2002 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 13628-2:2006/AC:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
DIN EN 13411-4 E : 2011 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 4: METAL AND RESIN SOCKETING
DIN EN ISO 2897-2:2004-05 PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 6402-2:2004-05 PLASTICS - ACRYLONITRILE-STYRENE-ACRYLATE (ASA), ACRYLONITRILE-(ETHYLENE-PROPYLENE-DIENE)-STYRENE (AEPDS) AND ACRYLONITRILE-(CHLORINATED POLYETHYLENE)-STYRENE (ACS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ISO 14526-1:1999 Plastics Phenolic powder moulding compounds (PF-PMCs) Part 1: Designation system and basis for specifications
BS EN ISO 12086-2:2006 Plastics. Fluoropolymer dispersions and moulding and extrusion materials Preparation of test specimens and determination of properties
UNE-EN ISO 75-1:2013 Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2013)
BS EN 13121-1:2003 GRP tanks and vessels for use above ground Raw materials. Specification conditions and acceptance conditions
BS EN ISO 3673-2:2012 Plastics. Epoxy resins Preparation of test specimens and determination of properties of crosslinked epoxy resins
ISO 17855-2:2016 Plastics Polyethylene (PE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN ISO 75-1:2013 Plastics. Determination of temperature of deflection under load General test method
ISO 1163-2:1995 Plastics Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
DIN EN ISO 3673-2:2012-10 Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
UNE-EN ISO 11833-1:2012 Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm (ISO 11833-1:2012)
UNI EN ISO 75-1 : 2013 PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 1: GENERAL TEST METHOD
UNE-EN ISO 11963:2013 Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2012)
UNE-EN ISO 1874-2:2013 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2012)
EN ISO 14663-2:2006 Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 14663-2:1999)
EN ISO 14527-1 : 1999 Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14527-1:1999)
EN 16506:2014 Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL)
EN ISO 9988-2:2015 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006)
EN 16245-2:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers
UNI EN ISO 3167 : 2014 PLASTICS - MULTIPURPOSE TEST SPECIMENS
UNI EN ISO 1874-2 : 2013 PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNI EN ISO 3673-2 : 2012 PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES OF CROSSLINKED EPOXY RESINS
ONORM EN 13411-4 : 2011 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 4: METAL AND RESIN SOCKETING
UNI EN ISO 11963 : 2013 PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS
UNI EN ISO 13628-2 : 2007 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
UNI EN ISO 7792-2 : 2013 PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNI EN ISO 14910-2 : 2013 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNI EN ISO 8986-2 : 2010 PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNI EN ISO 12086-2 : 2006 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 20028-2 E : 2017 PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017)
BS EN ISO 20029-2:2018 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Preparation of test specimens and determination of properties
EN 60598-1:2015/A1:2018 LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS
16/30292774 DC : 0 BS ISO 10639 - PLASTICS PIPING SYSTEMS FOR PRESSURE AND NON-PRESSURE WATER SUPPLY - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN
01/123351 DC : DRAFT SEP 2001 ISO/DIS 10639.3 - PLASTIC PIPING SYSTEMS FOR WATER SUPPLY, WITH OR WITHOUT PRESSURE - GLASS REINFORCED THERMOSETTING PLASTICS (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN
12/30275810 DC : 0 BS EN 16506 - SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL)
I.S. EN ISO 6402-2:2004 PLASTICS - ACRYLONITRILE-STYRENE-ACRYLATE (ASA), ACRYLONITRILE - (ETHYLENE-PROPYLENE-DIENE) - STYRENE (AEPDS) AND ACRYLONITRILE-(CHLORINATED POLYETHYLENE)-STYRENE (ACS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
CSA E598.1 : 2002 LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS
ISO 10639:2017 Plastics piping systems for pressure and non-pressure water supply Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
BS ISO 7792-2 : 1997 AMD 15252 PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
16/30319470 DC : 0 BS ISO 16611 - PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE WITHOUT PRESSURE - NON-CIRCULAR PIPES AND JOINTS MADE OF GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESINS (UP) - DIMENSIONS, REQUIREMENTS AND TESTS
I.S. EN ISO 1873-2:2007 PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ASTM D 5927 : 2017 : REDLINE Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods
I.S. EN ISO 1872-2:2007 PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN 16245-2:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for resin, curing systems, additives and modifiers
09/30198357 DC : 0 BS EN 13411-4 - TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 4: METAL RESIN SOCKETING
11/30242905 DC : 0 BS EN ISO 3673-2 - PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 9988-2:2015 PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 9988-2:2006)
DIN EN 61268 : 1996 ALTERNATING CURRENT STATIC VAR-HOUR METERS FOR REACTIVE ENERGY (CLASSES 2 AND 3)
05/30128281 DC : DRAFT JAN 2005 ISO 9988-2 - PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN 14636-1:2009 Plastics piping systems for non-pressure drainage and sewerage. Polyester resin concrete (PRC) Pipes and fittings with flexible joints
PREN 14636-2 : DRAFT 2009 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE DRAINAGE AND SEWERAGE - POLYESTER RESIN CONCRETE (PRC) - PART 2: MANHOLES AND INSPECTION CHAMBERS
DIN EN ISO 9988-2:2015-05 PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 9988-2:2006)
BS ISO 14663-2 : 1999 AMD 16029 PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 16611:2017 Plastics piping systems for drainage and sewerage without pressure. Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP). Dimensions, requirements and tests
09/30203307 DC : DRAFT JULY 2009 BS EN 14636-2 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE DRAINAGE AND SEWERAGE - POLYESTER RESIN CONCRETE (PRC) - PART 2: MANHOLES AND INSPECTION CHAMBERS
DD CEN/TS 15534-2:2007 Wood-plastics composites (WPC) Characterisation of WPC materials
15/30328414 DC : DRAFT JULY 2015 BS EN 62052-21/AMD1 - ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT
BS ISO 18672-1:2009 Plastics piping systems for non-pressure drainage and sewerage. Polyester resin concrete (PRC) Pipes and fittings with flexible joints
17/30354769 DC : 0 BS EN ISO 29988-2 - PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
16/30343625 DC : 0 BS ISO 10467 - PLASTICS PIPING SYSTEMS FOR PRESSURE AND NON-PRESSURE DRAINAGE AND SEWERAGE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN
03/118818 DC : DRAFT DEC 2003 BS EN ISO 7391-2 - PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN ISO 19069-2:2016 Plastics. Polypropylene (PP) moulding and extrusion materials Preparation of test specimens and determination of properties
CEI EN 62052-11 : 2003 ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 11: METERING EQUIPMENT
BS EN 61268:1996 Alternating current static var-hour meters for reactive energy (classes 2 and 3)
ASTM D 5935 : 1996 Practice for Acquisition and Presentation of Comparable Single-Point Data (Withdrawn 1998)
I.S. EN 4702-05:2017 AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 05: RETAINING WASHER
I.S. EN ISO 9093-2:2002 SMALL CRAFT - SEACOCKS AND THROUGH-HULL FITTINGS - PART 2: NON-METALLIC
DIN EN ISO 16396-2 E : 2017 PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 16396-2:2017)
UNE-EN ISO 11296-4:2011 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes (ISO 11296-4:2009, corrected version 2010-06-01)
CSA E60598.1 : 2016 LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS
BS ISO 12086-2 : 2001 AMD 10637 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS
API 17J REDLINE : 2008 SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
I.S. EN 14636-2:2009 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE DRAINAGE AND SEWERAGE - POLYESTER RESIN CONCRETE (PRC) - PART 2: MANHOLES AND INSPECTION CHAMBERS
UNE-EN ISO 16396-2:2017 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017)
BS EN 50470-1 : 2006 ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C)
I.S. EN ISO 25137-2:2017 PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 25137-2:2009)
DIN EN ISO 20028-2:2015-08 (Draft) PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017)
BS EN ISO 9093-2:2002 Small craft. Seacocks and through-hull fittings Non-metallic
EN ISO 11296-4:2018 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes (ISO 11296-4:2018)
EN ISO 20753:2014 PLASTICS - TEST SPECIMENS (ISO 20753:2008)
UNE-EN 60598-1:2015 Luminaires - Part 1: General requirements and tests
S.R. CEN/TS 15534-2:2007 WOOD-PLASTICS COMPOSITES (WPC) - PART 2: CHARACTERISATION OF WPC MATERIALS
DIN EN ISO 75-1:2013-08 PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 1: GENERAL TEST METHOD (ISO 75-1:2013)
DIN EN ISO 7823-1:2003-12 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS
UNE-EN ISO 14910-2:2014 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013, Corrected version 2015-12-15)
DIN EN ISO 7823-3:2007-08 Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007)
UNE-EN ISO 7792-2:2013 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7792-2:2012)
DIN EN ISO 11542-2:2010-01 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998 + Cor. 1:2007) (includes Corrigendum AC:2008)
DIN EN ISO 3167:2014-11 PLASTICS - MULTIPURPOSE TEST SPECIMENS (ISO 3167:2014)
DIN EN ISO 7823-2:2003-12 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 2: EXTRUDED SHEETS
DIN EN ISO 14910-2 E : 2013 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013)
BS EN ISO 14529-2:2000 Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs) Preparation of test specimens and determination of properties
11/30242263 DC : 0 BS EN 4691-001 - AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - TECHNICAL SPECIFICATION
IEC 62052-31:2015 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests
BS EN ISO 1873-2:2007 Plastics. Polypropylene (PP) moulding and extrusion materials Preparation of test specimens and determination of properties
ISO 1873-2:2007 Plastics Polypropylene (PP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 2897-2:2003 Plastics Impact-resistant polystyrene (PS-I) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
UNE-EN 1796:2014 Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)
ISO 14528-2:1999 Plastics Melamine-formaldehyde powder moulding compounds (MF-PMCs) Part 2: Preparation of test specimens and determination of properties
ISO 20028-2:2017 Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
BS EN ISO 14527-1:2000 Plastics. Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) Designation system and basis for specifications
BS EN 13923:2005 Filament-wound FRP pressure vessels. Materials, design, manufacturing and testing
BS EN 13558:2003 Specifications for impact modified extruded acrylic sheets for shower trays for domestic purposes
BS EN 13677-3:2003 Reinforced thermoplastic moulding compounds. Specification for GMT Specific requirements
BS EN ISO 3672-2:2001 Plastics. Unsaturated-polyester resins (UP-R) Preparation of test specimens and determination of properties
BS EN 13160-7:2003 Leak detection systems General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets
ISO 1874-2:2012 Plastics Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 11833-2:1998 Plastics — Unplasticized poly(vinyl chloride) sheets — Types, dimensions and characteristics — Part 2: Sheets of thickness less than 1 mm
BS EN ISO 10366-2:2003 Plastics. Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials Preparation of test specimens and determination of properties
ISO 2580-2:2003 Plastics Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN 1796:2013 Plastics piping systems for water supply with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)
ISO 14530-2:1999 Plastics Unsaturated-polyester powder moulding compounds (UP-PMCs) Part 2: Preparation of test specimens and determination of properties
BS EN ISO 7823-2:2003 Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics Extruded sheets
ISO 8257-2:2001 Plastics Poly(methyl methacrylate) (PMMA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 14530-1:1999 Plastics Unsaturated-polyester powder moulding compounds (UP-PMCs) Part 1: Designation system and basis for specifications
ISO 4894-2:1995 Plastics Styrene/acrylonitrile (SAN) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 14529-1:1999 Plastics Melamine/phenolic powder moulding compounds (MP-PMCs) Part 1: Designation system and basis for specifications
BS EN ISO 14528-1:2000 Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs) Designation system and basis for specifications
IEC 61268:1995 Alternating current static var-hour meters for reactive energy (classes 2 and 3)
ISO 12086-2:2006 Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 3672-2:2000 Plastics — Unsaturated-polyester resins (UP-R) — Part 2: Preparation of test specimens and determination of properties
BS EN 1115-1:2001 Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) General
ISO 7823-1:2003 Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets
BS EN ISO 14527-2:2000 Preparation of test specimens and determination of properties
ISO 7792-2:2012 Plastics Thermoplastic polyester (TP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN 13411-4:2011 Terminations for steel wire ropes. Safety Metal and resin socketing
EN ISO 75-1:2013 Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2013)
BS EN ISO 7823-1:2003 Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics Cast sheets
ISO 16396-2:2017 Plastics Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN ISO 8257-2:2006 Plastics. Poly(methyl methacrylate) (PMMA) moulding and extrusion materials Preparation of test specimens and determination of properties
ISO 10350:1993 Plastics Acquisition and presentation of comparable single-point data
ISO 1622-2:1995 Plastics Polystyrene (PS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 6402-2:2003 Plastics Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN ISO 11833-1:2012 Plastics. Unplasticized poly(vinyl chloride) sheets. Types, dimensions and characteristics Sheets of thickness not less than 1 mm
ONORM EN ISO 75-1 : 2013 PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 1: GENERAL TEST METHOD (ISO 75-1:2013)
I.S. EN ISO 75-1:2013 PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 1: GENERAL TEST METHOD (ISO 75-1:2013)
ISO 25137-2:2009 Plastics Sulfone polymer moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 11542-2:1998 Plastics Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 3167:2014 Plastics Multipurpose test specimens
ISO 15252-1:1999 Plastics Epoxy powder moulding compounds (EP-PMCs) Part 1: Designation system and basis for specifications
ISO 14526-2:1999 Plastics Phenolic powder moulding compounds (PF-PMCs) Part 2: Preparation of test specimens and determination of properties
ISO 10366-2:2003 Plastics Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 14528-1:1999 Plastics Melamine-formaldehyde powder moulding compounds (MF-PMCs) Part 1: Designation system and basis for specifications
ISO 8986-2:2009 Plastics Polybutene-1 (PB-1) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 9988-2:2006 Plastics Polyoxymethylene (POM) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
UNE-EN 14364:2015 Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints
ISO 3673-2:2012 Plastics — Epoxy resins — Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins
BS EN 14364:2013 Plastics piping systems for drainage and sewerage with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Specifications for pipes, fittings and joints
BS EN ISO 6402-2:2003 Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials Preparation of test specimens and determination of properties
UNE-EN ISO 3167:2014 Plastics - Multipurpose test specimens (ISO 3167:2014)
12/30266672 DC : 0 BS EN 60598-1 ED 8.0 - LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS
BS EN ISO 14663-2:2006 Plastics. Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 2897-2:2003 Plastics. Impact-resistant polystyrene (PS-I) moulding and extrusion materials Preparation of test specimens and determination of properties
ISO 13628-2:2006 Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications
BS EN ISO 14526-2:2000 Plastics. Phenolic powder moulding compounds (PF-PMCs) Preparation of test specimens and determination of properties
BS EN 4691-1:2017 Aerospace series. Tie rod with integrated bolts Technical specification
EN ISO 15252-1 : 1999 PLASTICS - EPOXY POWDER MOULDING COMPOUNDS (EP-PMCS) - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
EN ISO 1163-2 : 1999 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 15252-2 : 1999 PLASTICS - EPOXY POWDER MOULDING COMPOUNDS (EP-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 8257-2:2006 Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8257-2:2001)
EN ISO 8986-2:2009 Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8986-2:2009)
EN ISO 19069-2:2016 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016)
EN 14598-2:2005/AC:2006 REINFORCED THERMOSETTING MOULDING COMPOUNDS - SPECIFICATION FOR SHEET MOULDING COMPOUND (SMC) AND BULK MOULDING COMPOUND (BMC) - PART 2: METHODS OF TEST AND GENERAL REQUIREMENTS
EN 13677-3:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 3: Specific requirements
EN ISO 1873-2:2007 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1873-2:2007)
EN 13677-2:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 2: Methods of test and general requirements
EN ISO 1874-2:2012 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2012)
EN ISO 14529-2 : 1999 PLASTICS - MELAMINE/PHENOLIC POWDER MOULDING COMPOUNDS (MP-PMCS) - PART 2 - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 12086-2:2006/AC:2009 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 10366-2 : 2003 PLASTICS - METHYL METHACRYLATE-ACRYLONITRILE-BUTADIENE-STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 4613-2:1995/A1:2004 PLASTICS - ETHYLENE/VINYL ACETATE (E/VAC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 15526-2:2004 Plastics - Polyketone (PK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15526-2:2000)
EN ISO 3167:2014 Plastics - Multipurpose test specimens (ISO 3167:2014)
EN ISO 2580-2 : 2003 PLASTICS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 10350-1:2017 Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2017)
EN ISO 16396-2:2017 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017)
EN ISO 3672-2 : 2001 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 11833-2:2006 Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2: Sheets of thickness less than 1 mm (ISO 11833-2:1998)
EN ISO 14530-2 : 1999 PLASTICS - UNSATURATED-POLYESTER POWDER MOULDING COMPOUNDS (UP-PMCS) - PART 2 - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 7823-1:2003 Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:2003)
EN ISO 20028-2:2017 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20028-2:2017)
EN ISO 4894-2 : 1999 PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 1622-2 : 1999 PLASTICS - POLYSTYRENE (PS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 17855-2:2016 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016)
EN ISO 14528-2 : 1999 PLASTICS - MELAMINE/PHENOLIC POWDER MOULDING COMPOUNDS (MP-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 1872-2:2007 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1872-2:2007)
EN ISO 15103-2:2007 Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15103-2:2007)
EN ISO 3673-2:2012 Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
EN ISO 14910-2:2013 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013, Corrected version 2015-12-15)
EN ISO 14528-1 : 1999 PLASTICS - MELAMINE-FORMALDEHYDE POWDER MOULDING COMPOUNDS (MF-PMCS) - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
EN 13923:2005 Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing
EN ISO 14529-1 : 1999 PLASTICS - MELAMINE/PHENOLIC POWDER MOULDING COMPOUNDS (MP-PMCS) - PART 1 - DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
EN ISO 11833-1:2012 Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm (ISO 11833-1:2012)
EN ISO 14526-1 : 1999 PLASTICS - PHENOLIC POWDER MOULDING COMPOUNDS (PF/PMCS) - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
EN ISO 7823-2 : 2003 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 2: EXTRUDED SHEETS
EN 14598-1:2005 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 1: Designation
EN 14636-2:2009 Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC) - Part 2: Manholes and inspection chambers
EN ISO 7792-2:2012 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7792-2:2012)
EN ISO 6402-2 : 2003 PLASTICS - ACRYLONITRILE-STYRENE-ACRYLATE (ASA), ACRYLONITRILE-(ETHYLENE-PROPYLENE-DIENE)-STYRENE (AEPDS) AND ACRYLONITRILE-(CHLORINATED POLYETHYLENE)-STYRENE (ACS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 2897-2 : 2003 PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 14527-2 : 1999 PLASTICS - UREA-FORMALDEHYDE AND UREA/MELAMINE-FORMALDEHYDE POWDER MOULDING COMPOUNDS (UF- AND UF/MF-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 14530-1 : 1999 PLASTICS - UNSATURATED-POLYESTER POWDER MOULDING COMPOUNDS (UP-PMCS) - PART 1 - DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
EN ISO 25137-2:2017 Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 25137-2:2009)
12/30263857 DC : 0 BS EN 4702-05 - AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - WASHER
NF EN 62052-21 : 2006 ELECTRICITY METERING EQUIPMENT (A.C.) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT
ISO 20753:2008 Plastics Test specimens
DIN EN ISO 17855-2:2016-06 PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016)
PREN 1796 : DRAFT 2011 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP)
I.S. EN 15534-1:2014 COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
14/30298583 DC : 0 BS EN 13121-3 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP
06/30130317 DC : DRAFT JULY 2006 ISO 11833-1 - PLASTICS - UNPLASTICIZED POLY (VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS
BS EN 60598-1:2015 Luminaires General requirements and tests
API SPEC 17J : 2014 SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
08/30174008 DC : DRAFT JUNE 2008 BS ISO 11296-4 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 4: LINING WITH CURED-IN-PLACES PIPES
BS EN 15534-1 : 2014 COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
ISO 18672-1:2009 Plastics piping systems for non-pressure drainage and sewerage Polyester resin concrete (PRC) Part 1: Pipes and fittings with flexible joints
BS ISO 9988-2 : 2006 PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 19069-2 E : 2016 PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 19069-2:2016)
BS ISO 1622-2 : 1995 AMD 10649 PLASTICS - POLYSTYRENE (PS) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ASTM D 5138 : 2016 : REDLINE Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)
BS ISO 25137-2 : 2009 PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
04/30046221 DC : 0 PREN 13121-3 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP
BS ISO 17885:2015 Plastics piping systems. Mechanical fittings for pressure piping systems. Specifications
BS ISO 10639:2017 Plastics piping systems for pressure and non-pressure water supply. Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
BS ISO 1268-8:2004 Fibre-reinforced plastics. Methods of producing test plates Compression moulding of SMC and BMC
DIN EN 14636-2:2010-04 Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC) - Part 2: Manholes and inspection chambers
15/30304402 DC : 0 BS EN ISO 20028-2 - PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNI EN 14636-2 : 2010 PLASTICS PIPING SYSTEMS FOR NON- PRESSURE DRAINAGE AND SEWERAGE - POLYESTER RESIN CONCRETE (PRC) - PART 2: MANHOLES AND INSPECTION CHAMBERS
04/30091870 DC : DRAFT FEB 2004 BS EN ISO 12086-2 - PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 7823-3:2007 Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007)
BS ISO 11833-1:1998 Plastics. Unplasticized poly(vinyl chloride) sheets. Tapes, dimensions and characteristics Sheets of thickness not less than 1 mm
BS ISO 15840:2004 Ships and marine technology. Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications
EN 14364:2013 Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints
BS EN ISO 9988-2:2015 Plastics. Polyoxymethylene (POM) moulding and extrusion materials Preparation of test specimens and determination of properties
ASTM D 4066 : 2013 Standard Classification System for Nylon Injection and Extrusion Materials (PA)
PREN ISO 11963 : DRAFT 2011 PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS
I.S. EN 60598-1:2015 LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS
UNE-EN 16506:2015 Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL)
I.S. EN 62052-31:2016 ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 31: PRODUCT SAFETY REQUIREMENTS AND TESTS
I.S. EN 16506:2014 SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL)
DIN EN ISO 25137-2:2016-08 (Draft) PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 25137-2:2009)
API TR 17TR8 : 2018 HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES
17/30359220 DC : 0 BS EN 15269-20 - EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 20: SMOKE CONTROL FOR DOORS, SHUTTERS AND OPENABLE WINDOWS
BS EN ISO 10350-1:2017 Plastics. Acquisition and presentation of comparable single-point data Moulding materials
EN ISO 12215-1:2000 Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000)
UNE-EN ISO 20753:2015 Plastics - Test specimens (ISO 20753:2008)
ISO 7391-2:2006 Plastics Polycarbonate (PC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 75-1:2013 Plastics Determination of temperature of deflection under load Part 1: General test method
NF EN ISO 11963 : 2013 PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS
DIN EN ISO 2580-2 E : 2004 PLASTICS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 7792-2:2013-03 PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 7792-2:2012)
DIN EN 13559:2003-12 SPECIFICATIONS FOR IMPACT MODIFIED COEXTRUDED ABS/ACRYLIC SHEETS FOR BATHS AND SHOWER TRAYS FOR DOMESTIC PURPOSES
DIN EN ISO 10366-2:2004-05 PLASTICS - METHYL METHACRYLATE-ACRYLONITRILE-BUTADIENE-STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN ISO 1163-2:2000 Plastics. Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 8986-2:2009 Plastics. Polybutene-1 (PB-1) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 15103-2:2007 Plastics. Poly(phenylene ether) (PPE) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN 13199-3:2000 Packaging. Small load carrier systems Bond Stackable System (BSS)
BS EN ISO 14529-1:2000 Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs) Designation system and basis for specifications
ISO 15252-2:1999 Plastics Epoxy powder moulding compounds (EP-PMCs) Part 2: Preparation of test specimens and determination of properties
UNE-EN ISO 3673-2:2013 Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
BS EN ISO 14910-2:2013 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Preparation of test specimens and determination of properties
ISO 1872-2:2007 Plastics Polyethylene (PE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN ISO 11963:2012 Plastics. Polycarbonate sheets. Types, dimensions and characteristics
ISO 14663-2:1999 Plastics Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN ISO 7391-2:2006 Plastics. Polycarbonate (PC) moulding and extrusion materials Preparation of test specimens and determination of properties
ISO 14527-2:1999 Plastics Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) Part 2: Preparation of test specimens and determination of properties
BS EN ISO 7792-2:2012 Plastics. Thermoplastic polyester (TP) moulding and extrusion materials Preparation of test specimens and determination of properties
ISO 15526-2:2000 Plastics Polyketone (PK) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN ISO 14530-2:2000 Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs) Preparation of test specimens and determination of properties
BS EN ISO 15252-2:2000 Plastics. Epoxy powder moulding compounds (EP-PMCs) Preparation of test specimens and determination of properties
BS EN 14598-1:2005 Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Designation
ISO 14527-1:1999 Plastics Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) Part 1: Designation system and basis for specifications
BS EN ISO 14530-1:2000 Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs) Designation system and basis for specifications
EN 13559:2003 Specifications for impact modified coextruded ABS/Acrylic sheets for baths and shower trays for domestic purposes
EN 13566-4:2002 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes
DIN EN 13411-4:2011-06 Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing
EN 61036:1996/A1:2000 ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2)
DIN EN ISO 14663-2:2006-06 PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 62052-21:2004/A1:2017/AC:2018-04 ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT (IEC 62052-21:2004/A1:2016/COR1:2018)
DIN EN ISO 12086-2:2006-05 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 14910-2:2013-06 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013)
EN 13411-4:2011 Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing
DIN EN ISO 8986-2:2010-04 PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
CEN/TS 15534-2:2007 Wood-plastics composites (WPC) - Part 2: Characterisation of WPC materials
BS 7008-1(1994) : AMD 8821 ACQUISITION AND PRESENTATION OF COMPARABLE DATA FOR BASIC PROPERTIES OF PLASTICS - METHOD FOR SINGLE POINT DATA

ISO 75-1:2013 Plastics Determination of temperature of deflection under load Part 1: General test method
ISO 293:2004 Plastics — Compression moulding of test specimens of thermoplastic materials
ISO 10724-1:1998 Plastics — Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) — Part 1: General principles and moulding of multipurpose test specimens
ISO 5725:1986 Precision of test methods Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests
ISO 294-1:2017 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens
ISO 2818:1994 Plastics — Preparation of test specimens by machining
ISO 20753:2008 Plastics Test specimens

View more information
£58.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.