• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO/IEC 17025:2005

Withdrawn

Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by
withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

General requirements for the competence of testing and calibration laboratories

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

30-11-2018

Published date

12-05-2005

ISO/IEC 17025:2005 specifies the general requirements for the competence to carry out tests and/or calibrations, including sampling. It covers testing and calibration performed using standard methods, non-standard methods, and laboratory-developed methods.

It is applicable to all organizations performing tests and/or calibrations. These include, for example, first-, second- and third-party laboratories, and laboratories where testing and/or calibration forms part of inspection and product certification.

ISO/IEC 17025:2005 is applicable to all laboratories regardless of the number of personnel or the extent of the scope of testing and/or calibration activities. When a laboratory does not undertake one or more of the activities covered by ISO/IEC 17025:2005, such as sampling and the design/development of new methods, the requirements of those clauses do not apply.

ISO/IEC 17025:2005 is for use by laboratories in developing their management system for quality, administrative and technical operations. Laboratory customers, regulatory authorities and accreditation bodies may also use it in confirming or recognizing the competence of laboratories. ISO/IEC 17025:2005 is not intended to be used as the basis for certification of laboratories.

Compliance with regulatory and safety requirements on the operation of laboratories is not covered by ISO/IEC 17025:2005.

DocumentType
Standard
Pages
30
PublisherName
International Organization for Standardization
Status
Withdrawn
SupersededBy
Supersedes

ASTM F 2766 : 2011 : R2015 Standard Test Method for Boat Barriers
DIN ISO 21360-1 E : 2016 VACUUM TECHNOLOGY - STANDARD METHODS FOR MEASURING VACUUM-PUMP PERFORMANCE - PART 1: GENERAL DESCRIPTION (ISO 21360-1:2012)
BS ISO 12183:2016 Nuclear fuel technology. Controlled-potential coulometric assay of plutonium
15/30293072 DC : 0 BS EN ISO 6789-1 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - PART 1: REQUIREMENTS AND METHOD FOR DESIGN CONFORMANCE TESTING, QUALITY CONFORMANCE TESTING AND CALIBRATION PROCEDURE
I.S. EN ISO 6142-1:2015 GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES - PART 1: GRAVIMETRIC METHOD FOR CLASS 1 MIXTURES (ISO 6142-1:2015)
DIN EN ISO 12417-1 E : 2016 CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - VASCULAR DEVICE-DRUG COMBINATION PRODUCTS - PART 1: GENERAL REQUIREMENTS (ISO 12417-1:2015)
DIN CEN/TS 15634-4;DIN SPEC 10701-3:2016-08 FOODSTUFFS - DETECTION OF FOOD ALLERGENS BY MOLECULAR BIOLOGICAL METHODS - PART 4: PEANUT (ARACHIS HYPOGAEA) - QUALITATIVE DETECTION OF A SPECIFIC DNA SEQUENCE IN CHOCOLATE BY REAL-TIME PCR
17/30363953 DC : 0 BS EN 416 - GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY
S.R. CEN/TS 12666-2:2012 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
DIN EN 14164:2014-08 FOODSTUFFS - DETERMINATION OF VITAMIN B6 BY HIGH PERFORMANCE CHROMATOGRAPHY
S.R. CLC/TS 50625-3-4:2017 COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR WEEE - PART 3-4: SPECIFICATION FOR DE-POLLUTION - TEMPERATURE EXCHANGE EQUIPMENT
ISO/IEC TR 19795-3:2007 Information technology Biometric performance testing and reporting Part 3: Modality-specific testing
NFPA 1999 : 2018 PROTECTIVE CLOTHING AND ENSEMBLES FOR EMERGENCY MEDICAL OPERATIONS
I.S. EN ISO 15195:2003 LABORATORY MEDICINE - REQUIREMENTS FOR REFERENCE MEASUREMENT LABORATORIES
NFPA 1855 : 2018 SELECTION, CARE, AND MAINTENANCE OF PROTECTIVE ENSEMBLES FOR TECHNICAL RESCUE INCIDENTS
DIN EN ISO 13127:2013-03 Packaging - Child resistant packaging - Mechanical test methods for reclosable child resistant packaging systems (ISO 13127:2012 + Cor. 1:2012) (includes Corrigendum :2012)
10/30236539 DC : 0 BS EN 442-1 - RADIATORS AND CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
DIN ISO 24173 E : 2013 MICROBEAM ANALYSIS - GUIDELINES FOR ORIENTATION MEASUREMENT USING ELECTRON BACKSCATTER DIFFRACTION (ISO 24713:2009)
DIN ISO 21360-1:2016-09 VACUUM TECHNOLOGY - STANDARD METHODS FOR MEASURING VACUUM-PUMP PERFORMANCE - PART 1: GENERAL DESCRIPTION (ISO 21360-1:2012)
15/30298328 DC : 0 BS ISO 18898 - RUBBER - CALIBRATION AND VERIFICATION OF HARDNESS TESTERS
BS ISO 13383-2 : 2012 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MICROSTRUCTURAL CHARACTERIZATION - PART 2: DETERMINATION OF PHASE VOLUME FRACTION BY EVALUATION OF MICROGRAPHS
PD CEN/TR 16338:2012 Foodstuffs. Detection of food allergens. Template for supplying information about immunological methods and molecular biological methods
17/30349825 DC : 0 BS EN ISO 10704 - WATER QUALITY - GROSS ALPHA AND GROSS BETA ACTIVITY - TEST METHOD USING THIN SOURCE DEPOSIT
UNE-EN ISO 25539-2:2013 Cardiovascular implants - Endovascular devices - Part 2: Vascular stents (ISO 25539-2:2012)
ISO 18898:2016 Rubber Calibration and verification of hardness testers
SAE AS 6171/3 : 2016 TECHNIQUES FOR SUSPECT/COUNTERFEIT EEE PARTS DETECTION BY X-RAY FLUORESCENCE TEST METHODS
PD CEN/TS 13476-4:2013 Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Guidance for the assessment of conformity
UNE-EN 15461:2008 Railway applications - Noise emission - Characterisation of the dynamic properties of track sections for pass by noise measurements
BS ISO 5667-5:2006 Water quality. Sampling Guidance on sampling of drinking water from treatment works and piped distribution systems
DIN EN 16430-2 E : 2015 FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 2: TEST METHOD AND RATING FOR THERMAL OUTPUT
UNE-EN 16261-3:2014 Pyrotechnic articles - Fireworks, Category 4 - Part 3: Test methods
S.R. CWA 17253-2:2018 JOINT IMPLANTS - PART 2: TIERED TOOLKIT APPROACH TO EVALUATE THE BIOLOGICAL IMPACT OF WEAR PARTICLES FROM JOINT REPLACEMENTS AND RELATED DEVICES
I.S. EN 1568-2:2018 FIRE EXTINGUISHING MEDIA - FOAM CONCENTRATES - PART 2: SPECIFICATION FOR HIGH EXPANSION FOAM CONCENTRATES FOR SURFACE APPLICATION TO WATER-IMMISCIBLE LIQUIDS
BS EN ISO 13161:2015 Water quality. Measurement of polonium 210 activity concentration in water by alpha spectrometry
CEI EN 62209-2 : 2013 HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM HAND-HELD AND BODY-MOUNTED WIRELESS COMMUNICATION DEVICES - HUMAN MODELS, INSTRUMENTATION, AND PROCEDURES - PART 2: PROCEDURE TO DETERMINE THE SPECIFIC ABSORPTION RATE (SAR) FOR WIRELESS COMMUNICATION DEVICES USED IN CLOSE PROXIMITY TO THE HUMAN BODY (FREQUENCY RANGE OF 30 MHZ TO 6 GHZ)
PREN 14181 : DRAFT 2012 STATIONARY SOURCE EMISSIONS - QUALITY ASSURANCE OF AUTOMATED MEASURING SYSTEMS
BS EN 60601-1-2:2015 Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard. Electromagnetic disturbances. Requirements and tests
ONORM EN ISO 11704 : 2015 WATER QUALITY - MEASUREMENT OF GROSS ALPHA AND BETA ACTIVITY CONCENTRATION IN NON-SALINE WATER - LIQUID SCINTILLATION COUNTING METHOD (ISO 11704:2010)
BS ISO 16063-22 : 2005 METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 22: SHOCK CALIBRATION BY COMPARISON TO A REFERENCE TRANSDUCER
BS ISO 9696:2007 Water quality. Measurement of gross alpha activity in non-saline water. Thick source method
15/30325751 DC : 0 BS EN 50436-3 - ALCHOLIC INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 3: GUIDANCE FOR AUTHORITIES, DECISION MAKERS, PURCHASERS AND USERS
07/30172770 DC : 0 BS ISO 10428 - PETROLEUM AND NATURAL GAS INDUSTRIES DOWNHOLE EQUIPMENT - DOWNHOLE EQUIPMENT - SUCKER RODS, COUPLINGS AND ANCILLARY EQUIPMENT
ASTM C 1642 : 2014 : REDLINE Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials
BS EN 14033-1:2017 Railway applications. Track. Railbound construction and maintenance machines Technical requirements for running
10/30201937 DC : 0 BS ISO 13161 - WATER QUALITY - MEASUREMENT OF POLONIUM 210 CONCENTRATION ACTIVITY IN WATER BY ALPHA SPECTROMETRY
EN 15595:2009+A1:2011 RAILWAY APPLICATIONS - BRAKING - WHEEL SLIDE PROTECTION
11/30247943 DC : 0 EN ISO/IEC 17065 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR CERTIFICATION BODIES CERTIFYING PRODUCTS, PROCESSES AND SERVICES
UNE-EN ISO 11665-5:2016 Measurement of radioactivity in the environment -Air: radon-222 - Part 5: Continuous measurement method of the activity concentration (ISO 11665-5:2012)
UNE-EN ISO 18081:2017 Non-destructive testing - Acoustic emission testing (AT) - Leak detection by means of acoustic emission (ISO 18081:2016)
UNE-EN 16923:2018 Foodstuffs - Determination of T-2 toxin and HT-2 toxin in cereals and cereal products for infants and young children by LC-MS/MS after SPE cleanup
BS ISO 13383-1 : 2012 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MICROSTRUCTURAL CHARACTERIZATION - PART 1: DETERMINATION OF GRAIN SIZE AND SIZE DISTRIBUTION
ISO 19233-1:2017 Implants for surgery — Orthopaedic joint prosthesis — Part 1: Procedure for producing parametric 3D bone models from CT data of the knee
BS ISO 21748:2017 Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
08/30185924 DC : 0 BS EN 1071-10 - ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 10: DETERMINATION OF COATING THICKNESS BY CROSS SECTIONING
ISO 13165-2:2014 Water quality — Radium-226 — Part 2: Test method using emanometry
15/30322585 DC : 0 BS EN ISO 12402-7 - PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN ISO 20553:2017 RADIATION PROTECTION - MONITORING OF WORKERS OCCUPATIONALLY EXPOSED TO A RISK OF INTERNAL CONTAMINATION WITH RADIOACTIVE MATERIAL (ISO 20553:2006)
05/30136954 DC : 0 EN 15309 - CHARACTERIZATION OF WASTE AND SOIL - DETERMINATION OF ELEMENTAL COMPOSITION BY X-RAY FLUORESCENCE
PD CEN/TS 15634-3:2016 Foodstuffs. Detection of food allergens by molecular biological methods Hazelnut (Corylus avellana). Qualitative detection of a specific DNA sequence in chocolate by real-time PCR
DIN ISO 19204 E : 2017 SOIL QUALITY - PROCEDURE FOR SITE-SPECIFIC ECOLOGICAL RISK ASSESSMENT OF SOIL CONTAMINATION (SOIL QUALITY TRIAD APPROACH) (ISO 19204:2017)
OVE/ONORM EN 60068-2-10 : 2006 ENVIRONMENTAL TESTING - PART 2-10: TESTS - TEST J AND GUIDANCE: MOULD GROWTH
I.S. EN 1148:1999 HEAT EXCHANGERS - WATER TO WATER EXCHANGERS FOR DISTRICT HEATING - TEST PROCEDURES FOR ESTABLISHING THE PERFORMANCE DATA
BS 2000-508(2013) : 2013 COR 2015 AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL QUALITY - FUEL QUALITY MONITORING SYSTEM (FQMS)
DIN EN 16857 E : 2017 FOODSTUFFS - DETERMINATION OF BENZENE IN SOFT DRINKS, OTHER BEVERAGES AND VEGETABLE-BASED INFANT FOODS BY HEADSPACE GAS CHROMATOGRAPHY MASS SPECTROMETRY (HS-GC-MS)
I.S. EN 62788-1-2:2016 MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-2: ENCAPSULANTS - MEASUREMENT OF VOLUME RESISTIVITY OF PHOTOVOLTAIC ENCAPSULANTS AND OTHER POLYMERIC MATERIALS
OVE/ONORM EN 62501 : 2015 VOLTAGE SOURCED CONVERTER (VSC) VALVES FOR HIGH-VOLTAGE DIRECT CURRENT (HVDC) POWER TRANSMISSION - ELECTRICAL TESTING (IEC 62501:2009 + A1:2014)
CEI EN 61746-2 : 2012 CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 2: OTDR FOR MULTIMODE FIBRES
I.S. EN ISO 6142:2007 GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES - GRAVIMETRIC METHOD
PD CEN/TR 15983:2010 Stationary source emissions. Guidance on the application of EN 14181:2004
BIS IS 16197-1 : 2014 DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 1: INTRODUCTION AND OVERVIEW
11/30251700 DC : 0 BS EN 13804 - FOODSTUFFS - DETERMINATION OF ELEMENTS AND THEIR CHEMICAL SPECIES - GENERAL CONSIDERATIONS AND SPECIFIC REQUIREMENTS
08/30185921 DC : 0 BS EN 1071-9 - ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 9: DETERMINATION OF FRACTURE STRAIN
CEN/TR 16912:2016 Guidelines for a procedure to support the European standardization of cements
PD CEN/TS 1948-5:2015 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs Long-term sampling of PCDDs/PCDFs and PCBs
BS EN 62475:2010 High-current test techniques. Definitions and requirements for test currents and measuring systems
DIN ISO 22892:2006-09 SOIL QUALITY - GUIDELINES FOR THE IDENTIFICATION OF TARGET COMPOUNDS BY GAS CHROMATOGRAPHY AND MASS SPECTROMETRY
DIN EN ISO/IEC 17043 E : 2010 CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING
BS ISO 26423 : 2009 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF COATING THICKNESS BY CRATER-GRINDING METHOD
17/30363625 DC : DRAFT SEP 2017 BS EN ISO 11138-7 - STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 7: GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS
UNE-EN 62817:2016 Photovoltaic systems - Design qualification of solar trackers
BS EN ISO 16187:2013 Footwear and footwear components. Test method to assess antibacterial activity
10/30145959 DC : 0 ISO/IEC 19795-5 - INFORMATION TECHNOLOGY - BIOMETRIC PERFORMANCE TESTING AND REPORTING - PART 5: GRADING SCHEME FOR ACCESS CONTROL SCENARIO EVALUATION
15/30270276 DC : 0 BS EN 13103-1 - RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - PART 1: DESIGN GUIDE FOR AXLES WITH EXTERNAL JOURNALS
PREN 13796-3 : DRAFT 2012 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 3: FATIGUE TESTING
BS EN ISO 21148:2017 Cosmetics. Microbiology. General instructions for microbiological examination
BS ISO 14627:2012 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for fracture resistance of silicon nitride materials for rolling bearing balls at room temperature by indentation fracture (IF) method
FM 1020 : 2007 AUTOMATIC WATER CONTROL VALVES
ECA 10-15 : 2015 GUIDELINES ON THE CALIBRATION OF DIGITAL MULTIMETERS
12/30261879 DC : 0 BS EN 16440-1 - TESTING METHODOLOGIES OF COOLING EQUIPMENT FOR INSULATED MEANS OF TRANSPORTATION - PART 1: MECHANICAL REFRIGERATION SYSTEMS WITH FORCED AIR CIRCULATION EVAPORATOR
BS EN 61315:2006 Calibration of fibre-optic power meters
DIN EN 13796-3:2012-05 (Draft) SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 3: FATIGUE TESTING
UNI EN 15440 : 2011 SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF BIOMASS CONTENT
BS ISO 11665-1 : 2012 MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR: RADON-222 - PART 1: ORIGINS OF RADON AND ITS SHORT-LIVED DECAY PRODUCTS AND ASSOCIATED MEASUREMENT METHODS
09/30201918 DC : 0 BS EN 15947-4 - PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES 1, 2 AND 3 - PART 4: TEST METHODS
BS ISO 7503-1:2016 Measurement of radioactivity. Measurement and evaluation of surface contamination General principles
I.S. EN 12506:2003 CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF PH, AS, BA, CD, CL[-], CO, CR, CR (6), CU, MO, NI, NO[2-], PB, TOTAL S, SO[4][2-], V AND ZN
NFPA 197 : 2018 Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting
FM 1610 : 2016 DUCTILE IRON PIPE AND FITTINGS, FLEXIBLE FITTINGS AND COUPLINGS
03/320960 DC : DRAFT NOV 2003 EN 1948-1 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 1: SAMPLING
I.S. EN ISO 16140:2003 MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - PROTOCOL FOR THE VALIDATION OF ALTERNATIVE METHODS
11/30204376 DC : 0 BS ISO 13271 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF PM10/PM2,5 MASS CONCENTRATION IN FLUE GAS - MEASUREMENT AT HIGHER CONCENTRATIONS BY USE OF VIRTUAL IMPACTORS
BS EN 15309:2007 Characterization of waste and soil. Determination of elemental composition by X-ray fluorescence
BS ISO 2469:2014 Paper, board and pulps. Measurement of diffuse radiance factor (diffuse reflectance factor)
DIN EN 15358 E : 2011 SOLID RECOVERED FUELS - QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THEIR APPLICATION TO THE PRODUCTION OF SOLID RECOVERED FUELS
BS EN 15734-2:2010 Railway applications. Braking systems of high speed trains Test methods
BS EN 16430-1:2014 Fan assisted radiators, convectors and trench convectors Technical specifications and requirements
I.S. EN 1071-3:2005 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 3: DETERMINATION OF ADHESION AND OTHER MECHANICAL FAILURE MODES BY A SCRATCH TEST
UNI CEI CEN/TR 16469 : 2014 HYDROMETRY - MEASUREMENT OF THE RAINFALL INTENSITY (LIQUID PRECIPITATION): REQUIREMENTS, CALIBRATION METHODS AND FIELD MEASUREMENTS
BS EN 61786-1:2014 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings Requirements for measuring instruments
UNI CEN/TS 13476-4 : 2013 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYLS CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 4: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
18/30352175 DC : 0 BS EN ISO 16133 - SOIL QUALITY - GUIDANCE ON THE ESTABLISHMENT AND MAINTENANCE OF MONITORING PROGRAMMES
BS EN ISO 14629:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of flowability of ceramic powders
16/30313874 DC : 0 BS ISO 4094 - PAPER, BOARD, AND PULPS - GENERAL REQUIREMENTS FOR THE COMPETENCE OF LABORATORIES AUTHORIZED FOR THE ISSUE OF OPTICAL REFERENCE TRANSFER STANDARDS OF LEVEL 3
ISO/IEC 19795-1:2006 Information technology Biometric performance testing and reporting Part 1: Principles and framework
BS ISO 17161 : 2014 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - CERAMIC COMPOSITES - DETERMINATION OF THE DEGREE OF MISALIGNMENT IN UNIAXIAL MECHANICAL TESTS
BS ISO 18562-1:2017 Biocompatibility evaluation of breathing gas pathways in healthcare applications Evaluation and testing within a risk management process
BS EN ISO/IEC 27041:2016 Information technology. Security techniques. Guidance on assuring suitability and adequacy of incident investigative method
SAE AMS 3721 : 2017 TAPE FOR ORGANIC COATINGS ADHESION TESTING
BS ISO 19973-1:2015 Pneumatic fluid power. Assessment of component reliability by testing General procedures
I.S. EN 725-11:2006 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC POWDERS - PART 11: DETERMINATION OF DENSIFICATION ON NATURAL SINTERING
ISO 9241-306:2008 Ergonomics of human-system interaction Part 306: Field assessment methods for electronic visual displays
DIN EN 16943 E : 2017 FOODSTUFFS - DETERMINATION OF CALCIUM, COPPER, IRON, MAGNESIUM, MANGANESE, PHOSPHORUS, POTASSIUM, SODIUM, SULFUR AND ZINC BY ICP-OES
BIS IS/IEC 61701 : 2011 SALT MIST CORROSION TESTING OF PHOTOVOLTAIC (PV) MODULES
BS EN 16602-70-55:2015 Space product assurance. Microbiological examination of flight hardware and cleanrooms
BS ISO/IEC 19896-1:2018 IT security techniques. Competence requirements for information security testers and evaluators Introduction, concepts and general requirements
UNI EN 1177 : 2008 IMPACT ATTENUATING PLAYGROUND SURFACING - DETERMINATION OF CRITICAL FALL HEIGHT
PD CEN/TR 16478:2012 Surveillance from first commissioning on measuring devices used in natural gas supply to the installations of the activities under the Directive 2003/87/EC establishing a scheme of CO<sub>2</sub> emissions trading
BS ISO/IEC 27037 : 2012 INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - GUIDELINES FOR IDENTIFICATION, COLLECTION, ACQUISITION, AND PRESERVATION OF DIGITAL EVIDENCE
BS EN ISO 16000-26:2012 Indoor air Sampling strategy for carbon dioxide (CO<sub>2</sub>)
DD CEN/TS 13763-27:2003 Explosives for civil uses. Detonators and relays Definitions, methods and requirements for electronic initiation systems
BS ISO 18862:2016 Coffee and coffee products. Determination of acrylamide. Methods using HPLC-MS/MS and GC-MS after derivatization
15/30293075 DC : 0 BS EN ISO 6789-2 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - PART 2: REQUIREMENTS FOR CALIBRATION AND DETERMINATION OF MEASUREMENT UNCERTAINTY
IEEE 299-2006 IEEE Standard Method for Measuring the Effectiveness of Electromagnetic Shielding Enclosures
DD CEN/TS 843-6:2004 Advanced technical ceramics. Monolithic ceramics. Mechanical properties at room temperature Guidance for fractographic investigation
UNE-EN 16852:2017 Foodstuffs - Determination of ethyl carbamate in stone fruit spirits, fruit marc spirits and other spirit drinks - GC-MS method
I.S. EN ISO 18812:2003 HEALTH INFORMATICS - CLINICAL ANALYSER INTERFACES TO LABORATORY INFORMATION SYSTEMS - USE PROFILES
08/30149503 DC : DRAFT JAN 2008 BS EN ISO 14161 - STERILIZATION OF HEALTH CAR PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS
UNE-EN ISO 16187:2014 Footwear and footwear components - Test method to assess antibacterial activity (ISO 16187:2013)
14/30304346 DC : 0 BS EN ISO 17782 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - QUALIFICATION OF MANUFACTURERS OF SPECIAL MATERIALS
13/30272291 DC : 0 BS ISO 18227 - SOIL QUALITY - DETERMINATION OF ELEMENTAL COMPOSITION BY X-RAY FLUORESCENCE
16/30310940 DC : 0 BS EN ISO 5667-16 - WATER QUALITY - SAMPLING - PART 16: GUIDANCE ON BIOTESTING OF SAMPLES
BS EN ISO 5840-2:2015 Cardiovascular implants. Cardiac valve prostheses Surgically implanted heart valve substitutes
ISO/TR 10993-22:2017 Biological evaluation of medical devices — Part 22: Guidance on nanomaterials
BS ISO 17172:2014 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of compaction properties of ceramic powders
UNI EN 820-4 : 2009 ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 4: DETERMINATION OF FLEXURAL CREEP DEFORMATION AT ELEVATED TEMPERATURES
MIL-PRF-32307 Revision A:2017 VALVE, QUARTER TURN, TRIPLE-OFFSET, TORQUE SEATED, SHIPBOARD USE
CEI EN 62008 : 2006 PERFORMANCE CHARACTERISTICS AND CALIBRATION METHODS FOR DIGITAL DATA ACQUISITION SYSTEMS AND RELEVANT SOFTWARE
OIML G 1-106 : 2012 EVALUATION OF MEASUREMENT DATA - THE ROLE OF MEASUREMENT UNCERTAINTY IN CONFORMITY ASSESSMENT
CEI EN 50420 : 2007 BASIC STANDARD FOR THE EVALUATION OF HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS FROM A STAND ALONE BROADCAST TRANSMITTER (30 MHZ - 40 GHZ)
11/30210938 DC : 0 BS EN 61400-4 - WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES
03/307701 DC : DRAFT JUNE 2003 ISO/IEC 17000 - CONFORMITY ASSESSMENT - GENERAL VOCABULARY
BS EN ISO 20502:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of adhesion of ceramic coatings by scratch testing
API 17P : 2013 DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA STRUCTURES AND MANIFOLDS
PD IEC/TS 62600-200:2013 Marine energy. Wave, tidal and other water current converters Electricity producing tidal energy converters. Power performance assessment
BS ISO 24631-2:2017 Radiofrequency identification of animals Evaluation of conformance of RFID transceivers with ISO 11784 and ISO 11785
14/30272915 DC : 0 BS ISO 18400-106 - SOIL QUALITY - SAMPLING - PART 106: QUALITY CONTROL AND QUALITY ASSURANCE
12/30254917 DC : DRAFT JAN 2012 BS EN 877 - CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
BS ISO 24631-4:2017 Radiofrequency identification of animals Evaluation of performance of RFID transceivers conforming with ISO 11784 and ISO 11785
I.S. EN 62232:2017 DETERMINATION OF RF FIELD STRENGTH, POWER DENSITY AND SAR IN THE VICINITY OF RADIOCOMMUNICATION BASE STATIONS FOR THE PURPOSE OF EVALUATING HUMAN EXPOSURE
CEN ISO/TS 14027:2018 Environmental labels and declarations - Development of product category rules (ISO/TS 14027:2017)
BS ISO 13166:2014 Water quality. Uranium isotopes. Test method using alpha-spectrometry
ISO 13073-1:2012 Ships and marine technology - Risk assessment on anti-fouling systems on ships — Part 1: Marine environmental risk assessment method of biocidally active substances used for anti-fouling systems on ships
BS ISO 3846:2008 Hydrometry. Open channel flow measurement using rectangular broad-crested weirs
CSA ISO 14024 : 1999 : R2014 ENVIRONMENTAL LABELS AND DECLARATION - TYPE 1 ENVIRONMENTAL LABELLING - PRINCIPLES AND PROCEDURES
TS 103 051 : 1.1.1 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); EXPANDED MEASUREMENT UNCERTAINTY FOR THE MEASUREMENT OF RADIATED ELECTROMAGNETIC FIELDS
DD CEN ISO/TS 22391-7:2011 Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) Guidance for the assessment of conformity
DIN EN 16164:2013-05 WATER QUALITY - GUIDANCE STANDARD FOR DESIGNING AND SELECTING TAXONOMIC KEYS
PREN ISO 11140-1 : DRAFT 2012 STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS (ISO/DIS 11140-1:2012)
DIN EN 14535-3:2016-04 Railways applications - Brake discs for railway rolling stock - Part 3: Brake discs, performance of the disc and the friction couple, classification
04/30103162 DC : DRAFT MARCH 2004 EN 12094-5 - FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 5 - REQUIREMENTS AND TEST METHODS FOR HIGH AND LOW PRESSURE SELECTOR VALUES AND THEIR ACTUATORS
PD CEN/TR 15522-2:2012 Oil spill identification. Waterborne petroleum and petroleum products Analytical methodology and interpretation of results based on GC-FID and GC-MS low resolution analyses
I.S. EN 1159-1:2003 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - THERMO-PHYSICAL PROPERTIES - PART 2: DETERMINATION OF THERMAL DIFFUSIVITY
BS EN 820-4:2009 Advanced technical ceramics. Thermomechanical properties of monolithic ceramics Determination of flexural creep deformation at elevated temperatures
15/30300414 DC : 0 BS EN 62927 - VOLTAGE SOURCED CONVERTER (VSC) VALVES FOR STATIC SYNCHRONOUS COMPENSATOR (STATCOM) - ELECTRICAL TESTING
DIN EN ISO 12417-1:2016-02 CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - VASCULAR DEVICE-DRUG COMBINATION PRODUCTS - PART 1: GENERAL REQUIREMENTS (ISO 12417-1:2015)
16/30312922 DC : 0 BS ISO 18888 - GAS TURBINE COMBINED CYCLE POWER PLANTS THERMAL PERFORMANCE TESTS
14/30272951 DC : 0 BS ISO 18400-107 - SOIL QUALITY - SAMPLING - PART 107: RECORDING AND REPORTING
17/30302767 DC : 0 BS ISO 13779-2 - IMPLANTS FOR SURGERY - HYDROXYAPATITE - PART 2: THERMALLY SPRAYED COATINGS OF HYDROXYAPATITE
PREN 328 : DRAFT 2012 HEAT EXCHANGERS - FORCED CONVECTION UNIT AIR COOLERS FOR REFRIGERATION - TEST PROCEDURES FOR ESTABLISHING THE PERFORMANCE
DIN EN 16430-3 E : 2015 FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 3: TEST METHOD AND RATING FOR COOLING CAPACITY
MIL-PRF-31032 Revision C:2016 Printed Circuit Board/Printed Wiring Board, General Specification for
17/30291335 DC : 0 BS EN ISO 8199 - WATER QUALITY - GENERAL REQUIREMENTS AND GUIDANCE FOR MICROBIOLOGICAL EXAMINATIONS BY CULTURE
MIL-PRF-32433 Base Document:2012 BLANKET, WASHABLE, FLAME RESISTANT, SHIPBOARD
MIL-DTL-8783 Revision D:2009 Clamp, Hose, Flat Band 500 Degrees F, General Specification for
MIL-DTL-5515 Revision F:2013 PUMP, HYDRAULIC, RAM, HAND DRIVEN
ASTM D 6956 : 2017 : REDLINE Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use
17/30326671 DC : 0 BS ISO 27919-1 - CARBON DIOXIDE CAPTURE - PART 1: PERFORMANCE EVALUATION METHODS FOR POST-COMBUSTION CO[2] CAPTURE INTEGRATED WITH A POWER PLANT
CEI UNI EN ISO/IEC 17067 : 2013 CONFORMITY ASSESSMENT - FUNDAMENTALS OF PRODUCT CERTIFICATION AND GUIDELINES FOR PRODUCT CERTIFICATION SCHEMES
DIN EN ISO 13017:2016-05 DENTISTRY - MAGNETIC ATTACHMENTS (ISO 13017:2012 + AMD.1:2015)
03/317039 DC : DRAFT NOV 2003 ISO/IEC GUIDE 28 - CONFORMITY ASSESSMENT - GUIDANCE ON A THIRD-PARTY CERTIFICATION SYSTEM FOR PRODUCTS
DIN EN 843-8:2010-11 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 8: Guidelines for conducting proof tests
BS ISO 29661 : 2012 REFERENCE RADIATION FIELDS FOR RADIATION PROTECTION - DEFINITIONS AND FUNDAMENTAL CONCEPTS
MIL-DTL-32480 Base Document:2014 Adapter, Hydraulic and Pneumatic, Flareless Tube Fitting to ORFS Connectors, 1500 to 3000 PSI and Minus 65 Degrees Fahrenheit to Plus 250 Degrees Fahrenheit, General Specification for
BS ISO 25597:2013 Stationary source emissions. Test method for determining PM<sub>2,5</sub> and PM<sub>10</sub> mass in stack gases using cyclone samplers and sample dilution
CEI EN 60068-2-57 : 2014 ENVIRONMENTAL TESTING - PART 2-57: TESTS - TEST FF: VIBRATION - TIME HISTORY AND SINE-BEAT METHOD
15/30327269 DC : 0 BS EN ISO 17034 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS
BS EN 16185-2:2014 Railway applications. Braking systems of multiple unit trains Test methods
UNE-EN 62670-2:2016 Photovoltaic concentrators (CPV) - Performance testing - Part 2: Energy measurement
DIN EN 16447 E : 2014 EXPLOSION ISOLATION FLAP VALVES
I.S. EN ISO 11737-1:2018&LC:2018 STERILIZATION OF HEALTH CARE PRODUCTS - MICROBIOLOGICAL METHODS - PART 1: DETERMINATION OF A POPULATION OF MICROORGANISMS ON PRODUCTS (ISO 11737-1:2018)
04/30118430 DC : DRAFT AUG 2004 EN 50420 - BASIC STANDARD FOR THE EVALUATION OF HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS FROM A STAND ALONE BROADCAST TRANSMITTER (30 MHZ - 40 GHZ)
BS EN 16801:2016 Foodstuffs. Determination of elements and their chemical species. Determination of methylmercury in foodstuffs of marine origin by isotope dilution GC-ICP-MS
16/30296842 DC : 0 BS ISO 17168-3 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS UNDER INDOOR LIGHTING ENVIRONMENT - PART 3: REMOVAL OF TOLUENE
13/30268868 DC : 0 BS ISO/IEC 25051 - SOFTWARE ENGINEERING - SOFTWARE PRODUCT QUALITY REQUIREMENTS AND EVALUATION (SQUARE) - REQUIREMENTS FOR QUALITY OF COMMERCIAL OFF-THE-SHELF (COTS) SOFTWARE PRODUCT AND INSTRUCTIONS FOR TESTING
CEI EN 61400-22 : 2011 WIND TURBINES - PART 22: CONFORMITY TESTING AND CERTIFICATION
15/30314070 DC : 0 BS EN 16450 - AMBIENT AIR - AUTOMATED MEASURING SYSTEMS FOR THE MEASUREMENT OF THE CONCENTRATION OF PARTICULATE MATTER (PM10; PM2,5)
DIN EN ISO 22892:2011-09 Soil quality - Guidelines for the identification of target compounds by gas chromatography and mass spectrometry (ISO 22892:2006)
BS EN ISO/IEC 17067:2013 Conformity assessment. Fundamentals of product certification and guidelines for product certification schemes
13/30255566 DC : 0 BS ISO 17139 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - CERAMIC COMPOSITES - THERMOPHYSICAL PROPERTIES - DETERMINATION OF THERMAL EXPANSION
S.R. CLC/TR 50503:2010 GUIDELINES FOR THE INVENTORY CONTROL, MANAGEMENT, DECONTAMINATION AND/OR DISPOSAL OF ELECTRICAL EQUIPMENT AND INSULATING LIQUIDS CONTAINING PCBS
IEEE DRAFT 1309 : D2.0 2005 CALIBRATION OF ELECTROMAGNETIC FIELD SENSORS AND PROBES, EXCLUDING ANTENNAS, FROM 9 KHZ TO 40 GHZ
16/30337006 DC : 0 BS EN 60153-4 - HOLLOW METALLIC WAVEGUIDES - PART 4: RELEVANT SPECIFICATIONS FOR CIRCULAR WAVEGUIDES
12/30268424 DC : 0 BS EN 12341 - AMBIENT AIR - STANDARD GRAVIMETRIC MEASUREMENT METHOD FOR THE DETERMINATION OF THE PM10 OR PM2,5 MASS CONCENTRATION OF SUSPENDED PARTICULATE MATTER
BS EN ISO 10703:2015 Water quality. Determination of the activity concentration of radionuclides. Method by high resolution gamma-ray spectrometry
ISO 12576-1:2001 Thermal insulation Insulating materials and products for buildings Conformity control systems Part 1: Factory-made products
12/30239634 DC : 0 BS ISO 13073-2 - SHIPS AND MARINE TECHNOLOGY - RISK ASSESSMENT ON ANTI-FOULING SYSTEMS ON SHIPS - PART 2: MARINE ENVIRONMENTAL RISK ASSESSMENT METHOD FOR ANTI-FOULING SYSTEMS ON SHIPS USING BIOCIDALLY ACTIVE SUBSTANCES
MIL-PRF-19207 Revision G:2013 Fuseholders, Extractor Post Type, Blown Fuse, Indicating and Nonindicating, General Specification for
ISO/TS 21569-2:2012 Horizontal methods for molecular biomarker analysis Methods of analysis for the detection of genetically modified organisms and derived products Part 2: Construct-specific real-time PCR method for detection of event FP967 in linseed and linseed products
I.S. EN 19694-6:2016 STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 6: FERROALLOY INDUSTRY
BS EN ISO 16495:2013 Packaging. Transport packaging for dangerous goods. Test methods
BS ISO 18558:2015 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determining elastic modulus and bending strength of ceramic tube and rings
12/30253114 DC : 0 BS EN 16503 - WATER QUALITY - GUIDANCE STANDARD ON ASSESSING THE HYDROMORPHOLOGICAL FEATURES OF TRANSITIONAL AND COASTAL WATERS
UNI CEI 70016 : 2008 CONFORMITY ASSESSMENT - CODE OF GOOD PRACTICE
BS EN 16924:2017 Foodstuffs. Determination of zearalenone in edible vegetable oils by LC-FLD or LC-MS/MS
BS ISO 12576-2:2008 Thermal insulation products. Conformity control systems In-situ products
09/30191459 DC : 0 BS ISO 16063-41 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 41: CALIBRATION OF LASER VIBROMETERS
FM 1637 : 2010 FLEXIBLE SPRINKLER HOSE WITH THREADED END FITTINGS
CEI EN 60904-4 : 2010 PHOTOVOLTAIC DEVICES - PART 4: REFERENCE SOLAR DEVICES - PROCEDURES FOR ESTABLISHING CALIBRATION TRACEABILITY
DIN ISO 3567 E : 2015 VACUUM GAUGES - CALIBRATION BY DIRECT COMPARISON WITH A REFERENCE GAUGE (ISO 3567:2011)
DIN ISO 16000-3:2013-01 Indoor air - Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air - Active sampling method (ISO 16000-3:2011)
MIL-PRF-32584 Base Document:2017 Deck Covering Materials, Monolithic
BS EN 3-10:2009 Portable fire extinguishers Provisions for evaluating the conformity of a portable fire extinguisher to EN 3-7
ISO 2715:2017 Liquid hydrocarbons — Volumetric measurement by turbine flowmeter
SAE AS 5272 : 2016 LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING, PROCUREMENT SPECIFICATION
12/30265747 DC : 0 BS EN 845-2 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
13/30244111 DC : 0 BS ISO 16780 - WATER QUALITY - DETERMINATION OF POLYCHLORINATED NAPHTHALENES (PCN) - METHOD USING GAS CHROMATOGRAPHY (GC) AND MASS SPECTROMETRY (MS)
NF EN IEC 62554 : 2012 AMD 1 2018 SAMPLE PREPARATION FOR MEASUREMENT OF MERCURY LEVEL IN FLUORESCENT LAMPS
06/30141186 DC : 0 EN 50500 - MEASUREMENT PROCEDURES OF MAGNETIC FIELD LEVELS GENERATED BY ELECTRONIC AND ELECTRICAL APPARATUS IN THE RAILWAY ENVIRONMENT WITH RESPECT TO HUMAN EXPOSURE
11/30243584 DC : 0 BS EN 14960 - INFLATABLE PLAY EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS
NFU 47 021 : 2002 ANIMAL HEALTH ANALYSIS METHODS - DETECTION OF ANTIBODIES AGAINST BRUCELLOSIS BY THE SERUM AGGLUTINATION TEST
DIN ISO 24173:2013-04 MICROBEAM ANALYSIS - GUIDELINES FOR ORIENTATION MEASUREMENT USING ELECTRON BACKSCATTER DIFFRACTION (ISO 24713:2009)
PD CEN/TS 1852-2:2015 Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP) Guidance for the assessment of conformity
BS ISO 10790:2015 Measurement of fluid flow in closed conduits. Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements)
ISO 20553:2006 Radiation protection Monitoring of workers occupationally exposed to a risk of internal contamination with radioactive material
IEC TS 61400-23:2001 Wind turbine generator systems - Part 23: Full-scale structural testing of rotor blades
BS ISO 5667-6 : 2014 WATER QUALITY - SAMPLING - PART 6: GUIDANCE ON SAMPLING OF RIVERS AND STREAMS
DIN 4099-2:2003-08 WELDING OF REINFORCING STEEL - PART 2: QUALITY ASSURANCE
02/123322 DC : DRAFT AUG 2002 BS ISO 19480 - THERMOPLASTICS PIPES AND FITTINGS FOR THE SUPPLY OF GASEOUS FUELS - TRAINING AND ASSESSMENT OF FUSION-MACHINE OPERATORS
12/30258099 DC BS EN 267. Forced draught burners for liquid fuels
PD CEN ISO/TS 14907-1:2015 Electronic fee collection. Test procedures for user and fixed equipment Description of test procedures
DIN ISO 15175:2005-05 SOIL QUALITY - CHARACTERIZATION OF SOIL RELATED TO GROUNDWATER PROTECTION
BS ISO 6565:2011 Tobacco and tobacco products. Draw resistance of cigarettes and pressure drop of filter rods. Standard conditions and measurement
BS EN ISO 17945:2015 Petroleum, petrochemical and natural gas industries. Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments
BIS IS/ISO 15189 : 2012 MEDICAL LABORATORIES - REQUIREMENTS FOR QUALITY AND COMPETENCE
ISO 15472:2010 Surface chemical analysis X-ray photoelectron spectrometers Calibration of energy scales
16/30303428 DC : 0 BS EN 15507 - PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - COMPARATIVE MATERIAL TESTING OF POLYETHYLENE GRADES
MIL-DTL-83503 Revision C:2005 Connectors, Electrical, Flat Cable, and/or Printed Wiring Board, Nonenvironmental General Specification for
BS EN 50436-3:2016 Alcohol interlocks. Test methods and performance requirements Guidance for authorities, decision makers, purchasers and users
15/30318694 DC : 0 BS ISO 12828-2 - VALIDATION METHODS FOR FIRE GAS ANALYSES - PART 2: VALIDATION OF QUANTIFICATION METHOD
DIN ISO 22935-3:2012-12 Milk and milk products - Sensory analysis - Part 3: Guidance on a method for evaluation of compliance with product specifications for sensory properties by scoring (ISO 22935-3:2009)
10/30219399 DC : DRAFT JULY 2010 BS EN 15296 - SOLID BIOFUELS - CONVERSION OF ANALYTICAL RESULTS FROM ONE BASIS TO ANOTHER
02/207281 DC : DRAFT JULY 2002 PREN YYY - BASIC STANDARD FOR THE CALCULATION AND MEASUREMENT OF ELECTROMAGNETIC FIELDS RELATED TO HUMAN EXPOSURE FROM RADIO BASE STATIONS AND FIXED TERMINAL STATIONS FOR WIRELESS TELECOMMUNICATION SYSTEMS (110 MHZ - 40 GHZ), WHEN PUT INTO SERVICE
MIL-R-83407 Revision D:2014 RELAYS, REED (MERCURY WETTED), GENERAL SPECIFICATION FOR
BS EN 61481-2:2014 Live working. Phase comparators Resistive type to be used for voltages from 1 kV to 36 kV a.c.
BS EN 45545-1:2013 Railway applications. Fire protection on railway vehicles General
S.R. CEN/TS 15634-5:2016 FOODSTUFFS - DETECTION OF FOOD ALLERGENS BY MOLECULAR BIOLOGICAL METHODS - PART 5: MUSTARD (SINAPIS ALBA) AND SOYA (GLYCINE MAX) - QUALITATIVE DETECTION OF A SPECIFIC DNA SEQUENCE IN COOKED SAUSAGES BY REAL-TIME PCR
BS ISO 11336-1:2012 Large yachts. Strength, weathertightness and watertightness of glazed openings Design criteria, materials, framing and testing of independent glazed openings
DIN EN ISO 22975-2:2017-03 SOLAR ENERGY - COLLECTOR COMPONENTS AND MATERIALS - PART 2: HEAT-PIPES FOR SOLAR THERMAL APPLICATION - DURABILITY AND PERFORMANCE (ISO 22975-2:2016)
BS ISO 5667-21:2010 Water quality. Sampling Guidance on sampling of drinking water distributed by tankers or means other than distribution pipes
NF EN 60068-2-10 : 2005 ENVIRONMENTAL TESTING - PART 2-10: TESTS - TEST J AND GUIDANCE: MOULD GROWTH
S.R. CEN ISO/TS 22475-3:2007 GEOTECHNICAL INVESTIGATION AND TESTING - SAMPLING METHODS AND GROUNDWATER MEASUREMENTS - PART 3: CONFORMITY ASSESSMENT OF ENTERPRISES AND PERSONNEL BY THIRD PARTY
07/30142572 DC : 0 BS EN ISO 23210 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF PM 10/PM 2.5 MASS CONCENTRATION IN FLUE GAS - PART 1: MEASUREMENT AT LOW CONCENTRATIONS BY USE OF IMPACTORS
13/30290089 DC : 0 IEC 62321 2ND EDITION - DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 8: PHTHALATES IN POLYMERS BY PYROLYZER GAS CHROMATOGRAPHY-MASS SPECTROMETRY (PY-GC-MS), ION ATTACHMENT MASS SPECTROMETRY (IAMS), GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC-MS) AND LIQUID CHROMATOGRAPHY - MASS SPECTROMETRY (LC-MS)
UNE-EN 50383:2011 Basic standard for the calculation and measurement of electromagnetic field strength and SAR related to human exposure from radio base stations and fixed terminal stations for wireless telecommunication systems (110 MHz - 40 GHz)
ISO 5667-20:2008 Water quality Sampling Part 20: Guidance on the use of sampling data for decision making Compliance with thresholds and classification systems
CEI EN 62093 : 2005 BALANCE-OF-SYSTEM COMPONENTS FOR PHOTOVOLTAIC SYSTEMS - DESIGN QUALIFICATION NATURAL ENVIRONMENTS
S.R. CLC/TR 50485:2010 ELECTROMAGNETIC COMPATIBILITY - EMISSION MEASUREMENTS IN FULLY ANECHOIC CHAMBERS
ISO 27891:2015 Aerosol particle number concentration — Calibration of condensation particle counters
PD ISO/IEC Guide 68:2002 Arrangements for the recognition and acceptance of conformity assessment results
FM 2510 : 2014 FLOOD ABATEMENT EQUIPMENT
CEI EN 61701 : 2012 SALT MIST CORROSION TESTING OF PHOTOVOLTAIC (PV) MODULES
CEI EN 62522 : 2014 CALIBRATION OF TUNEABLE LASER SOURCES
BS EN 16852:2017 Foodstuffs. Determination of ethyl carbamate in stone fruit spirits, fruit marc spirits and other spirit drinks. GC-MS method
CEI EN 62475 : 2011 HIGH-CURRENT TEST TECHNIQUES - DEFINITIONS AND REQUIREMENTS FOR TEST CURRENTS AND MEASURING SYSTEMS
08/30169640 DC : 0 BS ISO 17089-1 - MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - ULTRASONIC METERS FOR GAS - PART 1: METERS FOR CUSTODY TRANSFER AND ALLOCATION MEASUREMENT
BS EN 16845-1:2017 Photocatalysis. Anti-soiling chemical activity using adsorbed organics under solid/solid conditions Dyes on porous surfaces
12/30265759 DC : 0 BS EN 845-3 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 3: BED JOINT REINFORCEMENT OF STEEL MESHWORK
I.S. EN 15859:2010 AIR QUALITY - CERTIFICATION OF AUTOMATED DUST ARRESTMENT PLANT MONITORS FOR USE ON STATIONARY SOURCES - PERFORMANCE CRITERIA AND TEST PROCEDURES
16/30302158 DC : 0 BS EN 1568-1 - FIRE EXTINGUISHING MEDIA - FOAM CONCENTRATES - PART 1: SPECIFICATION FOR MEDIUM EXPANSION FOAM CONCENTRATES FOR SURFACE APPLICATION TO WATER-IMMISCIBLE LIQUIDS
11/30250451 DC : 0 BS ISO 16632 - TOBACCO AND TOBACCO PRODUCTS - DETERMINATION OF WATER CONTENT - GAS-CHROMATOGRAPHIC METHOD
CEI EN 61646 : 2012 THIN-FILM TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL
FM 2000 : 2018 AUTOMATIC SPRINKLERS FOR FIRE PROTECTION
CEI EN 50505 : 2010 BASIC STANDARD FOR THE EVALUATION OF HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS FROM EQUIPMENT FOR RESISTANCE WELDING AND ALLIED PROCESSES
PREN 15507 : DRAFT 2016 PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - COMPARATIVE MATERIAL TESTING OF POLYETHYLENE GRADES
CEI EN 60904-1 : 2008 PHOTOVOLTAIC DEVICES - PART 1: MEASUREMENT OF PHOTOVOLTAIC CURRENT-VOLTAGE CHARACTERISTICS
CEI EN 62479 : 2013 ASSESSMENT OF THE COMPLIANCE OF LOW POWER ELECTRONIC AND ELECTRICAL EQUIPMENT WITH THE BASIC RESTRICTIONS RELATED TO HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS (10 MHZ - 300 GHZ)
DIN ISO 22309:2015-11 MICROBEAM ANALYSIS - QUANTITATIVE ANALYSIS USING ENERGY-DISPERSIVE SPECTROMETRY (EDS) FOR ELEMENTS WITH AN ATOMIC NUMBER OF 11 (NA) OR ABOVE (ISO 22309:2011)
DIN EN ISO 13160 E : 2016 WATER QUALITY - STRONTIUM 90 AND STRONTIUM 89 - TEST METHODS USING LIQUID SCINTILLATION COUNTING OR PROPORTIONAL COUNTING (ISO 13160:2012)
BS ISO 13164-3:2013 Water quality. Radon-222 Test method using emanometry
I.S. EN ISO/IEC 17050-1:2010 CONFORMITY ASSESSMENT - SUPPLIER&#39;S DECLARATION OF CONFORMITY - PART 1: GENERAL REQUIREMENTS
CSA G4 : 2015 STEEL WIRE ROPE FOR GENERAL PURPOSE AND FOR MINE HOISTING AND MINE HAULAGE
PREN 845-1 : DRAFT 2012 SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS
03/317040 DC : DRAFT NOV 2003 ISO/IEC GUIDE 67 - FUNDAMENTALS OF PRODUCT CERTIFICATION
10/30179537 DC : 0 BS ISO 11665-1 - MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR - PART 1: RADON-222 AND ITS SHORT-LIVED DECAY PRODUCTS IN THE ATMOSPHERIC ENVIRONMENT: THEIR ORIGINS AND MEASUREMENT METHODS
ECA ILAC P10 : 2013 ILAC POLICY ON TRACEABILITY OF MEASUREMENT RESULTS
BS EN ISO 6142-1:2015 Gas analysis. Preparation of calibration gas mixtures Gravimetric method for Class I mixtures
07/30161538 DC : 0 BS EN 60060-2 - HIGH-VOLTAGE TEST TECHNIQUES - PART 2: MEASURING SYSTEMS
ISO/TS 20612:2007 Water quality Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
10/30201940 DC : 0 ISO/DIS 13162 - WATER QUALITY - DETERMINATION OF CARBON 14 ACTIVITY - LIQUID SCINTILLATION COUNTING METHOD
BS ISO 26424 : 2008 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF THE ABRASION RESISTANCE OF COATINGS BY A MICRO-SCALE ABRASION TEST
BS EN ISO 16664:2017 Gas analysis. Handling of calibration gases and gas mixtures. Guidelines
08/30179084 DC : DRAFT MAR 2008 BS EN 62577 - BASIC STANDARD FOR THE EVALUATION OF HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS FROM A STAND ALONE BROADCAST TRANSMITTER (30 MHZ - 40 GHZ)
PD IEC/TS 62622:2012 Nanotechnologies. Description, measurement and dimensional quality parameters of artificial gratings
MIL-DTL-12883 Revision F:2003 Sockets and Accessories for Plug-in Electronic Components, General Specification for
BS EN ISO/IEC 17020:2012 Conformity assessment. Requirements for the operation of various types of bodies performing inspection
BS ISO 16664 : 2004 GAS ANALYSIS - HANDLING OF CALIBRATION GASES AND GAS MIXTURES - GUIDELINES
09/30201391 DC : 0 BS EN 55016-4-2 ED.2 - SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 4-2: UNCERTAINTIES, STATISTICS AND LIMIT MODELLING - MEASUREMENT INSTRUMENTATION UNCERTAINTY
09/30151431 DC : 0 BS ISO 27048 - RADIATION PROTECTION - DOSE ASSESSMENT FOR THE MONITORING OF WORKERS FOR INTERNAL RADIATION EXPOSURE
17/30333935 DC : 0 BS EN 1300 - SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING
16/30302485 DC : 0 BS EN ISO 11737-1 - STERILIZATION OF HEALTH CARE PRODUCTS - MICROBIOLOGICAL METHODS - PART 1: DETERMINATION OF A POPULATION OF MICROORGANISMS ON PRODUCT
12/30265756 DC : 0 BS EN 845-1 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS
BS EN 62927:2017 Voltage sourced converter (VSC) valves for static synchronous compensator (STATCOM). Electrical Testing
DD ISO/PAS 17712:2006 Freight containers. Mechanical seals
PD IEC/TS 62782:2016 Photovoltaic (PV) modules. Cyclic (dynamic) mechanical load testing
BS ISO 18589-6:2009 Measurement of radioactivity in the environment. Soil Measurement of gross alpha and gross beta activities
BS 6068-5.39(2005) : 2005 WATER QUALITY - DETERMINATION OF THE TOXIC EFFECT OF WATER CONSTITUENTS AND WASTE WATER ON DUCKWEED (LEMNA MINOR) - DUCKWEED GROWTH INHIBITION TEST
16/30338096 DC : 0 BS EN 303-1 - HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING
10/30200748 DC : 0 BS ISO 13160 - WATER QUALITY - MEASUREMENT OF STRONTIUM 90 AND STRONTIUM 89
PD CEN/TS 1453-2:2017 Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity
16/30302555 DC : 0 BS ISO 16962 - SURFACE CHEMICAL ANALYSIS - ANALYSIS OF ZINC- AND/OR ALUMINIUM-BASED METALLIC COATINGS BY GLOW-DISCHARGE OPTICAL-EMISSION SPECTROMETRY
NF EN 62554 : 2012 SAMPLE PREPARATION FOR MEASUREMENT OF MERCURY LEVEL IN FLUORESCENT LAMPS
13/30277008 DC : 0 BS ISO 17162 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - DETERMINATION OF COMPRESSIVE STRENGTH
BS ISO 15380:2016 Lubricants, industrial oils and related products (class L). Family H (Hydraulic systems). Specifications for hydraulic fluids in categories HETG, HEPG, HEES and HEPR
15/30320777 DC : 0 BS EN 14375 - CHILD-RESISTANT NON-RECLOSABLE PACKAGING FOR PHARMACEUTICAL PRODUCTS - REQUIREMENTS AND TESTING
ISO/TR 24498:2006 Paper, board and pulps Estimation of uncertainty for test methods
BS ISO 16000-16:2008 Indoor air Detection and enumeration of moulds. Sampling by filtration
BS ISO 16632:2013 Tobacco and tobacco products. Determination of water content.Gas-chromatographic method
S.R. CEN/TS 12201-7:2014 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
BS ISO 4377:2012 Hydrometric determinations. Flow measurement in open channels using structures. Flat-V weirs
02/564504 DC : DRAFT OCT 2002 BS EN ISO 12402-7 - PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
BS ISO 18185-4:2007 Freight containers. Electronic seals Data protection
I.S. EN ISO 17034:2016 GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS (ISO 17034:2016)
UNE-EN ISO 16641:2016 Measurement of radioactivity in the environment - Air - Radon 220: Integrated measurement methods for the determination of the average activity concentration using passive solid-state nuclear track detectors (ISO 16641:2014)
ONORM EN ISO 9698 : 2015 WATER QUALITY - DETERMINATION OF TRITIUM ACTIVITY CONCENTRATION - LIQUID SCINTILLATION COUNTING METHOD (ISO 9698:2010)
01/200684 DC : DRAFT FEB 2001
BS EN ISO 6789-1:2017 Assembly tools for screws and nuts. Hand torque tools Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance
13/30261096 DC : 0 BS EN ISO 17945 - MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS
BS ISO/IEC 19795-1:2006 Information technology. Biometric performance testing and reporting Principles and framework
BS ISO 15175 : 2004 SOIL QUALITY - CHARACTERIZATION OF SOIL RELATED TO GROUNDWATER PROTECTION
ISO 18591:2015 Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of compressive strength of ceramic granules
BS EN 62311:2008 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz)
BS ISO 11665-7 : 2012 MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR: RADON-222 - PART 7: ACCUMULATION METHOD FOR ESTIMATING SURFACE EXHALATION RATE
I.S. EN ISO 18589-3:2017 MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - SOIL - PART 3: TEST METHOD OF GAMMA-EMITTING RADIONUCLIDES USING GAMMA-RAY SPECTROMETRY (ISO 18589-3:2015, CORRECTED VERSION 2015-12-01)
PD CEN/TS 1455-2:2012 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Guidance for the assessment of conformity
16/30301537 DC : 0 BS ISO 19628 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - THERMOPHYSICAL PROPERTIES OF CERAMIC COMPOSITES - DETERMINATION OF SPECIFIC HEAT CAPACITY
BS ISO 19628:2017 Fine ceramics (advanced ceramics, advanced technical ceramics). Thermophysical properties of ceramic composites. Determination of specific heat capacity
13/30214533 DC : 0 BS ISO 14385-2 - STATIONARY SOURCE EMISSIONS - GREEN HOUSE GASES - PART 2: ONGOING QUALITY CONTROL OF AUTOMATED MEASURING SYSTEMS
16/30295054 DC : DRAFT APR 2016 BS ISO 12963 - GAS ANALYSIS - COMPARISON METHODS FOR THE DETERMINATION OF THE COMPOSITION OF GAS MIXTURES BASED ON ONE- AND TWO-POINT CALIBRATION
OIML G 21 : 2017 GUIDANCE FOR DEFINING THE REQUIREMENTS FOR A CERTIFICATION SYSTEM FOR PREPACKAGES
PD ISO/IEC TR 17026:2015 Conformity assessment. Example of a certification scheme for tangible products
CEI UNI 70018 : 2009 CONFORMITY ASSESSMENT - GUIDANCE ON THE USE OF AN ORGANIZATION'S QUALITY MANAGEMENT SYSTEM IN PRODUCT CERTIFICATION
BS ISO 14034 : 2016 ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV)
BS IEC 61577-4 : 2009 RADIATION PROTECTION INSTRUMENTATION - RADON AND RADON DECAY PRODUCT MEASURING INSTRUMENTS - PART 4: EQUIPMENT FOR THE PRODUCTION OF REFERENCE ATMOSPHERES CONTAINING RADON ISOTOPES AND THEIR DECAY PRODUCTS (STAR)
02/707905 DC : DRAFT JUN 2002 ISO/DIS 18653 - GEARS - EVALUATION OF INSTRUMENTS FOR THE MEASUREMENT OF GEARS
BS EN ISO/IEC 27037:2016 Information technology. Security techniques. Guidelines for identification, collection, acquisition and preservation of digital evidence
DD CEN ISO/TS 14907-1:2010 Electronic fee collection. Test procedures for user and fixed equipment Description of test procedures
MIL-DTL-32372 Revision A:2016 Fitting, Adapter, Hydraulic and Pneumatic, NPTF to ORFS Connectors, 1500 to 3000 PSI and -65°F to 250°F
S.R. CEN/TR 15522-2:2012 OIL SPILL IDENTIFICATION - WATERBORNE PETROLEUM AND PETROLEUM PRODUCTS - PART 2: ANALYTICAL METHODOLOGY AND INTERPRETATION OF RESULTS BASED ON GC-FID AND GC-MS LOW RESOLUTION ANALYSES
09/30196542 DC : 0 BS ISO 9698 - WATER QUALITY - DETERMINATION OF TRITIUM ACTIVITY CONCENTRATION - LIQUID SCINTILLATION COUNTING METHOD
BS ISO 18227:2014 Soil quality. Determination of elemental composition by X-ray fluorescence
ANSI/AAMI/ISO 25539-2:2012 CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 2: VASCULAR STENTS
14/30274825 DC : 0 BS ISO 7503-2 - MEASUREMENT OF RADIOACTIVITY - MEASUREMENT AND E EVALUATION OF SURFACE CONTAMINATION - PART 2: TEST METHOD USING WIPE-TEST SAMPLES
BS ISO 1438:2017 Hydrometry. Open channel flow measurement using thin-plate weirs
17/30355634 DC : 0 BS EN 62311 ED.2.0 - ASSESSMENT OF ELECTRONIC AND ELECTRICAL EQUIPMENT RELATED TO HUMAN EXPOSURE RESTRICTIONS FOR ELECTROMAGNETIC FIELDS (0 HZ - 300 GHZ)
16/30296845 DC : 0 BS ISO 17168-4 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS UNDER INDOOR LIGHTING ENVIRONMENT - PART 4: REMOVAL OF FORMALDEHYDE
BS EN 80601-2-59:2009 Medical electrical equipment Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening
12/30266207 DC : 0 BS EN 62716 - AMMONIA CORROSION TESTING OF PHOTOVOLTAIC (PV) MODULES
UNI CEN/TS 1455-2 : 2012 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
DIN EN 1071-9:2009-10 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 9: DETERMINATION OF FRACTURE STRAIN
BS ISO 9697 : 2015 WATER QUALITY - GROSS BETA ACTIVITY IN NON-SALINE WATER - TEST METHOD USING THICK SOURCE
MIL-PRF-32489 Base Document:2014 PILLOW, FLAME RESISTANT, SHIPBOARD
11/30251478 DC : 0 BS EN 1300 - SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING
BS ISO 18898:2016 Rubber. Calibration and verification of hardness testers
BS EN 16503:2014 Water quality. Guidance standard on assessing the hydromorphological features of transitional and coastal waters
BS ISO 22892 : 2006 SOIL QUALITY - GUIDELINES FOR THE IDENTIFICATION OF TARGET COMPOUNDS BY GAS CHROMATOGRAPHY AND MASS SPECTROMETRY
I.S. EN 16503:2014 WATER QUALITY - GUIDANCE STANDARD ON ASSESSING THE HYDROMORPHOLOGICAL FEATURES OF TRANSITIONAL AND COASTAL WATERS
PD CEN/TS 12666-2:2012 Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE) Guidance for the assessment of conformity
DD ENV 623-5:2002 Advanced technical ceramics. Monolithic ceramics. General and textural properties Determination of phase volume fraction by evaluation of micrographs
MIL-DTL-32585 Base Document:2017 Insulation, Thermal and Acoustic, Fibrous Glass
15/30331502 DC : DRAFT DEC 2015 BS EN ISO 9696 - WATER QUALITY - MEASUREMENT OF GROSS ALPHA ACTIVITY IN NON-SALINE WATER - THICK SOURCE METHOD
17/30355975 DC : 0 BS ISO 14375 - CHILD-RESISTANT NON-RECLOSABLE PACKAGING FOR PHARMACEUTICAL PRODUCTS - REQUIREMENTS AND TESTING
PD CLC/TS 50625-3-1:2015 Collection, logistics & treatment requirements for WEEE Specification for de-pollution. General
08/30189631 DC : DRAFT SEP 2008 BS EN 50215 - RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE
03/306294 DC : DRAFT APR 2003 EN 14662-3 - AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF BENZENE CONCENTRATION - PART 3: AUTOMATED PUMPED SAMPLING WITH IN SITU GAS CHROMATOGRAPHIC ANALYSIS
UNE-EN 1300:2014 Secure storage units - Classification for high security locks according to their resistance to unauthorized opening
07/30157769 DC : DRAFT DEC 2007 BS EN ISO 11737-2 - STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE VALIDATION OF A STERILIZATION PROCESS
03/319521 DC : DRAFT NOV 2003 ISO/IEC 17040 - GENERAL REQUIREMENTS FOR PEER ASSESSMENT OF CONFORMITY ASSESSMENT BODIES
06/30146327 DC : 0 EN ISO 16000-12 - INDOOR AIR - PART 12: SAMPLING STRATEGY FOR POLYCYCLIC AROMATIC HYDROCARBONS (PAHS), POLYCHLORINATED DIBENZO-P-DIOXINS (PCDDS), POLYCHLORINATED DIBENZO-FURANS (PCDFS) AND POLYCHLORINATED BIPHENYLS (PCBS)
BS EN 45544-1:2015 Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours General requirements and test methods
CSA ISO 10012 : 2003 MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT
PD ISO/TR 15155:2005 Test facilities for agricultural irrigation equipment
BS ISO 6142 : 2001 AMD 16906 GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES - GRAVIMETRIC METHOD
BS EN 60068-2-57:2013 Environmental testing Tests. Test Ff: Vibration. Time-history and sine-beat method
S.R. CEN/TS 12200-2:2017 PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
EN ISO 13162:2015 Water quality - Determination of carbon 14 activity - Liquid scintillation counting method (ISO 13162:2011)
CEI EN 61746-1 : 2012 CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 1: OTDR FOR SINGLE-MODE FIBRES
09/30148338 DC : 0
DIN EN 15355 E : 2011 RAILWAY APPLICATIONS - BRAKING - DISTRIBUTOR VALVES AND DISTRIBUTOR-ISOLATING DEVICES
ISO 6789-2:2017 Assembly tools for screws and nuts — Hand torque tools — Part 2: Requirements for calibration and determination of measurement uncertainty
API 20A : 2017 CARBON STEEL, ALLOY STEEL, STAINLESS STEEL, AND NICKEL BASE ALLOY CASTINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY
BS EN ISO 3266 : 2010 FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010+A1:2015)
ASTM D 7495 : 2012 Standard Specification for Minimum Requirements for Accreditation Bodies that Accredit Agencies Testing and Inspecting Road and Paving Materials
CSA Z1416: 2011 STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS
MIL-PRF-32518 Base Document:2015 INTERIOR HEAD IMPACT PROTECTION FOR USE IN U.S. ARMY MILITARY VEHICLE INTERIORS
06/30130038 DC : DRAFT MAY 2006 ISO 10703 - WATER QUALITY - DETERMINATION OF THE ACTIVITY CONCENTRATION OF RADIONUCLIDES - METHOD BY HIGH RESOLUTION GAMMA-RAY SPECTROMETRY
BS ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
07/30170532 DC : DRAFT NOV 2007 BS EN 1906 - BUILDING HARDWARE - LEVER HANDLES AND KNOB FURNITURE - REQUIREMENTS AND TEST METHODS
BS EN ISO/IEC 17050-1:2010 Conformity assessment. Suppliers declaration of conformity General requirements
UNE-EN 16280:2013 Breath alcohol test devices for general public - Requirements and test methods
BIS IS/ISO 10012 : 2003(R2009) MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT
CSA O325 : 2016 CONSTRUCTION SHEATHING
ISO/TS 21748:2004 Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation
14/30313011 DC : 0 BS ISO 17781 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - TEST METHODS FOR QUALITY CONTROL OF MICROSTRUCTURE OF AUSTENITIC/FERRITIC (DUPLEX) STAINLESS STEEL
04/19981537 DC : DRAFT MARCH 2004 EN 14902 - AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF PB/CD/AS/NI IN AMBIENT AIR
PREN 15654-1 : DRAFT 2015 RAILWAY APPLICATIONS - MEASUREMENT OF VERTICAL FORCES ON WHEELS AND WHEELSETS - PART 1: INTEROPERABLE ON-TRACK MEASUREMENT SITES FOR VEHICLES IN SERVICE
02/123018 DC : DRAFT NOV 2002 ISO 20182 - REFRACTORY TEST PIECE PREPARATION - GUNNING REFRACTORIES BY THE PNEUMATIC-NOZZLE MIXING TYPE GUNS
BS ISO 15790:2004 Graphic technology and photography. Certified reference materials for reflection and transmission metrology. Documentation and procedures for use, including determination of combined standard uncertainty
BS ISO 4094:2017 Paper, board and pulps. General requirements for the competence of laboratories authorized for the issue of optical reference transfer standards of level 3
CSA N288.5 : 2011 : R2016 EFFLUENT MONITORING PROGRAMS AT CLASS 1 NUCLEAR FACILITIES AND URANIUM MINES AND MILLS
BIS IS 13708-2 : 2014 SHIPS AND MARINE TECHNOLOGY - MARINE RADAR REFLECTORS - PART 2: ACTIVE TYPE
UNE-EN ISO 16495:2014 Packaging - Transport packaging for dangerous goods - Test methods (ISO 16495:2013)
UNE-EN 61400-23:2014 Wind turbines - Part 23: Full-scale structural testing of rotor blades
I.S. EN 14037-4:2016 FREE HANGING HEATING AND COOLING SURFACES FOR WATER WITH A TEMPERATURE BELOW 120 DEGREES C - PART 4: PRE-FABRICATED CEILING MOUNTED RADIANT PANELS - TEST METHOD FOR COOLING CAPACITY
UNE-CEN/TS 1555-7:2015 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity
CSA Z10083 : 2008 OXYGEN CONCENTRATOR SUPPLY SYSTEMS FOR USE WITH MEDICAL GAS PIPELINE SYSTEMS
PD ISO/IEC TR 15443-1:2012 Information technology. Security techniques. Security assurance framework Introduction and concepts
ASTM E 2437 : 2005 Standard Practice for Designing and Validating Performance-Based Test Methods for the Analysis of Metals, Ores, and Related Materials (Withdrawn 2014)
EN 61400-12-1:2017 Wind energy generation systems - Part 12-1: Power performance measurement of electricity producing wind turbines
CEI UNI 70019 : 2008 CONFORMITY ASSESSMENT ARRANGEMENTS FOR THE RECOGNITION AND ACCEPTANCE OF CONFORMITY ASSESSMENT RESULTS
04/30115503 DC : DRAFT JUN 2004 EN 14986 - DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
I.S. EN 16602-20-07:2016 SPACE PRODUCT ASSURANCE - QUALITY AND SAFETY ASSURANCE FOR SPACE TEST CENTRES
ISO 21844:2018 Cellular plastic — Cellulose foam thermal insulation — Material specification
CEI EN 61744 : 2006 CALIBRATION OF FIBRE OPTIC CHROMATIC DISPERSION TEST SETS
MIL-DTL-22992 Revision H:2015 Connectors, Plugsand Receptacles, Electrical, Waterproof, Quick Disconnect, Heavy Duty Type, General Specification for
MIL-DTL-13220 Revision G:2015 HOOK, SLIP (FOR USE WITH WIRE ROPE OR CHAINS)
07/30081678 DC : 0 BS ISO 9697 - WATER QUALITY - MEASUREMENT OF GROSS BETA ACTIVITY IN NON-SALINE WATER
ISO 21289:2008 Mechanical vibration and shock — Parameters to be specified for the acquisition of vibration data
CSA ISO 14937 : 2011 STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
EN 15192:2006 Characterisation of waste and soil - Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection
IEEE/ANSI N323AB-2013 American National Standard for Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments
FM 2021,25 : 2010 AUTOMATIC AND OPEN WATER-SPRAY NOZZLES FOR INSTALLATION IN PERMANENTLY PIPED SYSTEMS
DIN EN 12572-2:2015-07 (Draft) ARTIFICIAL CLIMBING STRUCTURES - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BOULDERING WALLS
CEI EN 62431 : 2010 REFLECTIVITY OF ELECTROMAGNETIC WAVE ABSORBERS IN MILLIMETRE WAVE FREQUENCY - MEASUREMENT METHODS
UNE-EN 16164:2013 Water quality - Guidance standard for designing and selecting taxonomic keys
ISO 23409:2011 Male condoms Requirements and test methods for condoms made from synthetic materials
CLC/TR 50485:2010 Electromagnetic compatibility - Emission measurements in fully anechoic chambers
DIN ISO 16592 E : 2015 MICROBEAM ANALYSIS - ELECTRON PROBE MICROANALYSIS - GUIDELINES FOR DETERMINING THE CARBON CONTENT OF STEELS USING A CALIBRATION CURVE METHOD (ISO 16592:2012)
DIN ISO 29941 E : 2014 CONDOMS - DETERMINATION OF NITROSAMINES MIGRATING FROM NATURAL RUBBER LATEX CONDOMS (ISO 29941:2010)
DIN EN ISO 13161:2016-01 WATER QUALITY - MEASUREMENT OF POLONIUM 210 ACTIVITY CONCENTRATION IN WATER BY ALPHA SPECTROMETRY (ISO 13161:2011)
ISO 9698:2010 Water quality Determination of tritium activity concentration Liquid scintillation counting method
ASTM D 6689 : 2001 : R2006 Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
PREN 14425-3 : DRAFT 2009 ADVANCED TECHNICAL CERAMICS - TEST METHODS FOR DETERMINATION OF FRACTURE TOUGHNESS OF MONOLITHIC CERAMICS - PART 3: CHEVRON NOTCHED BEAM (CNB) METHOD
CSA Z11140.1 : 2007 : R2012 STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS
UNE-EN 45545-1:2013 Railway applications - Fire protection on railway vehicles - Part 1: General
DIN EN ISO 6142-1 E : 2015 GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES - PART 1: GRAVIMETRIC METHOD FOR CLASS I MIXTURES (ISO 61421:2015)
CEI R210-010 : 2004 ELECTROMAGNETIC COMPATIBILITY - EMISSION MEASUREMENTS IN FULLY ANECHOIC CHAMBERS
CSA Z11137-3 : 2007 : R2012 : FR STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS
MIL-DTL-17813 Revision H:2009 Expansion Joints, Pipe, Metallic Bellows, General Specification for
ISEA 207 : 2011 HIGH-VISIBILITY PUBLIC SAFETY VESTS
SAE AMS 7002 : 2018 PROCESS REQUIREMENTS FOR PRODUCTION OF METAL POWDER FEEDSTOCK FOR USE IN ADDITIVE MANUFACTURING OF AEROSPACE PARTS
NF ISO 13161 : 2011 WATER QUALITY - MEASUREMENT OF POLONIUM 210 ACTIVITY CONCENTRATION IN WATER BY ALPHA SPECTROMETRY
CSA O112.9 : 2010 : R2014 EVALUATION OF ADHESIVES FOR STRUCTURAL WOOD PRODUCTS (EXTERIOR EXPOSURE)
FM 3600 : 2018 ELECTRICAL EQUIPMENT FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS - GENERAL REQUIREMENTS
S.R. CEN/TS 15119-2:2012 DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - DETERMINATION OF EMISSIONS FROM PRESERVATIVE TREATED WOOD TO THE ENVIRONMENT - PART 2: WOODEN COMMODITIES EXPOSED IN USE CLASS 4 OR 5 (IN CONTACT WITH THE GROUND, FRESH WATER OR SEA WATER) - LABORATORY METHOD
I.S. EN ISO 11731:2017 WATER QUALITY - ENUMERATION OF LEGIONELLA (ISO 11731:2017)
ISO 5910:2018 Cardiovascular implants and extracorporeal systems Cardiac valve repair devices
ISO/IEC 17000:2004 Conformity assessment Vocabulary and general principles
I.S. EN 62282-6-200:2017 FUEL CELL TECHNOLOGIES - PART 6-200: MICRO FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
ISO 19227:2018 Implants for surgery — Cleanliness of orthopedic implants — General requirements
I.S. EN 19694-1:2016 STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 1: GENERAL ASPECTS
PREN 9250 : DRAFT 2016 AEROSPACE SERIES - TEST ORGANISATIONS - GENERAL REQUIREMENTS FOR TEST PROCESS AND CAPABILITIES
ISO 3846:2008 Hydrometry Open channel flow measurement using rectangular broad-crested weirs
ISO 13163:2013 Water quality Lead-210 Test method using liquid scintillation counting
SAE AMS 3144 : 2012 PRIMER, ANODIC ELECTRODEPOSITION FOR AIRCRAFT APPLICATIONS
NASM 1312-8 : 2001 FASTENER TEST METHODS, METHOD 8, TENSILE STRENGTH
ISO 10840:2008 Plastics Guidance for the use of standard fire tests
CSA O112.9 : 2010(R2019) EVALUATION OF ADHESIVES FOR STRUCTURAL WOOD PRODUCTS (EXTERIOR EXPOSURE)
ANSI/AAMI/ISO 5840-3:2013 CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 3: HEART VALVE SUBSTITUTES IMPLANTED BY TRANSCATHETER TECHNIQUES
EN 304:2017 Heating boilers - Test code for heating boilers for atomizing oil burners
I.S. EN ISO 10801:2010 NANOTECHNOLOGIES - GENERATION OF METAL NANOPARTICLES FOR INHALATION TOXICITY TESTING USING THE EVAPORATION/CONDENSATION METHOD
IEEE/ANSI N42.17A-2003 American National Standard Performance Specifications for Health Physics Instrumentation-Portable Instrumentation for Use in Normal Environmental Conditions
I.S. EN 16339:2013 AMBIENT AIR - METHOD FOR THE DETERMINATION OF THE CONCENTRATION OF NITROGEN DIOXIDE BY DIFFUSIVE SAMPLING
CEN/TR 16988:2016 Estimation of uncertainty in the single burning item test
BS EN 16005:2012 Power operated pedestrian doorsets. Safety in use. Requirements and test methods
PREN 303-1 : DRAFT 2016 HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING
ISO 13164-3:2013 Water quality — Radon-222 — Part 3: Test method using emanometry
IWA 1:2005 Quality management systems Guidelines for process improvements in health service organizations
I.S. EN 60456:2016 CLOTHES WASHING MACHINES FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE
ISO/TS 21569-5:2016 Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived products — Part 5: Real-time PCR based screening method for the detection of the FMV promoter (P-FMV) DNA sequence
I.S. EN 15267-2:2009 AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 2: INITIAL ASSESSMENT OF THE AMS MANUFACTURER'S QUALITY MANAGEMENT SYSTEM AND POST CERTIFICATION SURVEILLANCE FOR THE MANUFACTURING PROCESS
ANSI INCITS 429:2008(R2018) INFORMATION TECHNOLOGY - CONFORMANCE TESTING METHODOLOGY FOR ANSI INCITS 358-2002, BIOAPI SPECIFICATION
I.S. EN 14037-5:2016 FREE HANGING HEATING AND COOLING SURFACES FOR WATER WITH A TEMPERATURE BELOW 120 DEGREES C - PART 5: OPEN OR CLOSED HEATED CEILING SURFACES - TEST METHOD FOR THERMAL OUTPUT
ASTM E 3061 : 2017 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance Based Method)
PREN 1143-1 : DRAFT 2017 SECURE STORAGE UNITS - REQUIREMENTS, CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO BURGLARY - PART 1: SAFES, ATM SAFES, STRONGROOM DOORS AND STRONGROOMS
I.S. EN 60652:2004 LOADING TESTS ON OVERHEAD LINE STRUCTURES
I.S. EN 19694-2:2016 STATIONARY SOURCE EMISSIONS - GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 2: IRON AND STEEL INDUSTRY
AAMI ISO 5840-1 : 2016 CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 1: GENERAL REQUIREMENTS
I.S. EN 1568-4:2018 FIRE EXTINGUISHING MEDIA - FOAM CONCENTRATES - PART 4: SPECIFICATION FOR LOW EXPANSION FOAM CONCENTRATES FOR SURFACE APPLICATION TO WATER-MISCIBLE LIQUIDS
S.R. CLC/TS 50625-3-2:2016 COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR WEEE - PART 3-2: TECHNICAL SPECIFICATION FOR DE-POLLUTION - LAMPS
I.S. EN 15358:2011 SOLID RECOVERED FUELS - QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THEIR APPLICATION TO THE PRODUCTION OF SOLID RECOVERED FUELS
CEI EN 61215-1 : 1ED 2017 TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL - PART 1: TEST REQUIREMENTS
I.S. EN ISO 6789-1:2017 ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - PART 1: REQUIREMENTS AND METHODS FOR DESIGN CONFORMANCE TESTING AND QUALITY CONFORMANCE TESTING: MINIMUM REQUIREMENTS FOR DECLARATION OF CONFORMANCE (ISO 6789-1:2017)
I.S. EN 62670-3:2017 PHOTOVOLTAIC CONCENTRATORS (CPV) - PERFORMANCE TESTING - PART 3: PERFORMANCE MEASUREMENTS AND POWER RATING
I.S. EN ISO 9698:2015 WATER QUALITY - DETERMINATION OF TRITIUM ACTIVITY CONCENTRATION - LIQUID SCINTILLATION COUNTING METHOD (ISO 9698:2010)
ISO 21748:2017 Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
S.R. CEN/TS 1566-2:2012 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY
BS EN 50500 : 2008 MEASUREMENT PROCEDURES OF MAGNETIC FIELD LEVELS GENERATED BY ELECTRONIC AND ELECTRICAL APPARATUS IN THE RAILWAY ENVIRONMENT WITH RESPECT TO HUMAN EXPOSURE
BS ISO 27608 : 2010 ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF LOVIBOND[R] COLOUR - AUTOMATIC METHOD
I.S. EN ISO 5840-1:2015 CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 1: GENERAL REQUIREMENTS (ISO 5840-1:2015)
EN 62232:2017 Determination of RF field strength, power density and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure
IEC 62427:2007 Railway applications - Compatibility between rolling stock and train detection systems
AAMI TIR39:2009 GUIDANCE ON SELECTING A MICROBIAL CHALLENGE AND INOCULATION SITES FOR STERILIZATION VALIDATION OF MEDICAL DEVICES
S.R. CEN TR 15642:2011 UNIFIED TESTS PROCEDURES FOR THE TESTS OF EN 3-7:2004+A1:2007
I.S. EN 16479:2014 WATER QUALITY - PERFORMANCE REQUIREMENTS AND CONFORMITY TEST PROCEDURES FOR WATER MONITORING EQUIPMENT - AUTOMATED SAMPLING DEVICES (SAMPLERS) FOR WATER AND WASTE WATER
I.S. EN 16857:2017 FOODSTUFFS - DETERMINATION OF BENZENE IN SOFT DRINKS, OTHER BEVERAGES AND VEGETABLE-BASED INFANT FOODS BY HEADSPACE GAS CHROMATOGRAPHY MASS SPECTROMETRY (HS-GC-MS)
I.S. EN ISO/IEC 17067:2013 CONFORMITY ASSESSMENT - FUNDAMENTALS OF PRODUCT CERTIFICATION AND GUIDELINES FOR PRODUCT CERTIFICATION SCHEMES (ISO/IEC 17067:2013 (EQV))
I.S. EN ISO 17824:2014 PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND SCREENS (ISO 17824:2009)
EN 60154-4 : 2017 Flanges for waveguides - Part 4: Relevant specifications for flanges for circular waveguides
18/30367685 DC : 0 BS EN 17218 - WATER QUALITY - GUIDANCE ON SAMPLING OF MESOZOOPLANKTON FROM MARINE AND BRACKISH WATER USING MESH
IEC 61730-2 REDLINE : 2ED 2016 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING
13/30277463 DC : 0 BS EN 12927 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES
I.S. EN ISO 22282-1:2012 GEOTECHNICAL INVESTIGATION AND TESTING - GEOHYDRAULIC TESTING - PART 1: GENERAL RULES (ISO 22282-1:2012)
I.S. EN ISO 3095:2013 ACOUSTICS - RAILWAY APPLICATIONS - MEASUREMENT OF NOISE EMITTED BY RAILBOUND VEHICLES (ISO 3095:2013)
I.S. EN 50513:2009 SOLAR WAFERS - DATA SHEET AND PRODUCT INFORMATION FOR CRYSTALLINE SILICON WAFERS FOR SOLAR CELL MANUFACTURING
S.R. CEN/TS 16800:2015 GUIDELINE FOR THE VALIDATION OF PHYSICO-CHEMICAL ANALYTICAL METHODS
I.S. EN ISO 11704:2015 WATER QUALITY - MEASUREMENT OF GROSS ALPHA AND BETA ACTIVITY CONCENTRATION IN NON-SALINE WATER - LIQUID SCINTILLATION COUNTING METHOD (ISO 11704:2010)
I.S. EN 60068-2-6:2008 ENVIRONMENTAL TESTING - PART 2-6: TESTS - TEST FC: VIBRATION (SINUSOIDAL)
I.S. EN 14425-3:2010 ADVANCED TECHNICAL CERAMICS - TEST METHODS FOR DETERMINATION OF FRACTURE TOUGHNESS OF MONOLITHIC CERAMICS - PART 3: CHEVRON NOTCHED BEAM (CNB) METHOD
I.S. EN 12014-2:2017 FOODSTUFFS - DETERMINATION OF NITRATE AND/OR NITRITE CONTENT - PART 2: HPLC/IC METHOD FOR THE DETERMINATION OF NITRATE CONTENT OF VEGETABLES AND VEGETABLE PRODUCTS
BS ISO 22197-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials Removal of nitric oxide
I.S. EN 61481-1:2014 LIVE WORKING - PHASE COMPARATORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
I.S. EN ISO 16859-3:2015 METALLIC MATERIALS - LEEB HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE TEST BLOCKS (ISO 16859-3:2015)
ISEA 125 : 2014 CONFORMITY ASSESSMENT OF SAFETY AND PERSONAL PROTECTIVE EQUIPMENT
AAMI TIR39:2009(R2017) GUIDANCE ON SELECTING A MICROBIAL CHALLENGE AND INOCULATION SITES FOR STERILIZATION VALIDATION OF MEDICAL DEVICES
S.R. CEN/TS 16080:2013 INTERNET CONTENT AND COMMUNICATIONS FILTERING SOFTWARE AND SERVICES
I.S. EN 16009:2011 FLAMELESS EXPLOSION VENTING DEVICES
I.S. EN 16450:2017 AMBIENT AIR - AUTOMATED MEASURING SYSTEMS FOR THE MEASUREMENT OF THE CONCENTRATION OF PARTICULATE MATTER (PM10; PM2,5)
I.S. EN ISO 11665-5:2015 MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR: RADON-222 - PART 5: CONTINUOUS MEASUREMENT METHOD OF THE ACTIVITY CONCENTRATION (ISO 11665-5:2012)
UNI CEI ISO/IEC 17007 : 2010 CONFORMITY ASSESSMENT - GUIDANCE FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT
SAE AS 6081 : 2012 FRAUDULENT/COUNTERFEIT ELECTRONIC PARTS: AVOIDANCE, DETECTION, MITIGATION, AND DISPOSITION - DISTRIBUTORS
I.S. EN ISO 17078-4:2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 4: PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT
ISO/TR 15499:2016 Biological evaluation of medical devices Guidance on the conduct of biological evaluation within a risk management process
ISO 16142-2:2017 Medical devices — Recognized essential principles of safety and performance of medical devices — Part 2: General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards
CSA C22.2 No. 60601.1.2 : 2016 MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS
UNI CEI EN 45545-1 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL
UNI EN 15267-1 : 2009 AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 1: GENERAL PRINCIPLES
ASTM D 8029 : 2017-08 SPECIFICATION FOR BIODEGRADABLE, LOW AQUATIC TOXICITY HYDRAULIC FLUIDS
ISO 21927-1:2008 Smoke and heat control systems — Part 1: Specification for smoke barriers
ISO 22197-3:2011 Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for air-purification performance of semiconducting photocatalytic materials Part 3: Removal of toluene
ISO 18550:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) Testing method for macro-heterogeneity in microstructure
UNI EN ISO 12311 : 2013 PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR SUNGLASSES AND RELATED EYEWEAR
ISO/IEC Guide 98-4:2012 Uncertainty of measurement Part 4: Role of measurement uncertainty in conformity assessment
BS EN 62209-2:2010 Human exposure to radio frequency fields from hand-held and bodymounted wireless communication devices. Human models, instrumentation, and procedures Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)
DIN EN 16845-1:2015-05 (Draft) PHOTOCATALYSIS - ANTI-SOILING CHEMICAL ACTIVITY USING ADSORBED ORGANICS UNDER SOLID/SOLID CONDITIONS - PART 1: DYES ON POROUS SURFACES
ISO/IEC Guide 98-1:2009 Uncertainty of measurement — Part 1: Introduction to the expression of uncertainty in measurement
I.S. EN ISO 13628-15:2011 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS (ISO 13628-15:2011)
S.R. CEN/TS 1329-2:2012 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
S.R. CEN/TS 15634-3:2016 FOODSTUFFS - DETECTION OF FOOD ALLERGENS BY MOLECULAR BIOLOGICAL METHODS - PART 3: HAZELNUT (CORYLUS AVELLANA) - QUALITATIVE DETECTION OF A SPECIFIC DNA SEQUENCE IN CHOCOLATE BY REAL-TIME PCR
CEN/TR 17105:2017 Construction products - Assessment of release of dangerous substances - Guidance on the use of ecotoxicity tests applied to construction products
BS 2000-509(2013) : 2013 AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL FUEL QUALITY - SAMPLING FROM RETAIL SITE PUMPS AND COMMERCIAL SITE FUEL DISPENSERS
BS EN ISO 18589-2:2017 Measurement of radioactivity in the environment. Soil Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples
BS EN 1568-2:2018 Fire extinguishing media. Foam concentrates Specification for high expansion foam concentrates for surface application to water-immiscible liquids
OIML D 29 : 2008 GUIDE FOR THE APPLICATION OF ISO/IEC GUIDE 65 TO ASSESSMENT OF MEASURING INSTRUMENT CERTIFICATION BODIES IN LEGAL METROLOGY
UNE-EN ISO/IEC 17043:2010 Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010)
DIN EN 15595:2015-11 (Draft) RAILWAY APPLICATIONS - BRAKING - WHEEL SLIDE PROTECTION
IEC TS 62129-3:2014 Calibration of wavelength/optical frequency measurement instruments - Part 3: Optical frequency meters using optical frequency combs
I.S. EN 60601-1-2:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS
EN 1400:2013+A1:2014 Child use and care articles - Soothers for babies and young children - Safety requirements and test methods
DIN EN ISO 16133:2011-09 SOIL QUALITY - GUIDANCE ON THE ESTABLISHMENT AND MAINTENANCE OF MONITORING PROGRAMMES
I.S. EN 60945:2002 MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - GENERAL REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS
ASTM E 2093 : 2012 Standard Guide for Optimizing, Controlling and Assessing Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
UNE-EN 61701:2012 Salt mist corrosion testing of photovoltaic (PV) modules
16/30338920 DC : 0 BS EN 14325 - PROTECTIVE CLOTHING AGAINST CHEMICALS - TEST METHODS AND PERFORMANCE CLASSIFICATION OF CHEMICAL PROTECTIVE CLOTHING MATERIALS, SEAMS, JOINS AND ASSEMBLAGES
BS EN 15595 : 2009 RAILWAY APPLICATIONS - BRAKING - WHEEL SLIDE PROTECTION
I.S. EN 843-6:2009 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 6: GUIDANCE FOR FRACTOGRAPHIC INVESTIGATION
DIN EN ISO 10704:2015-11 WATER QUALITY - MEASUREMENT OF GROSS ALPHA AND GROSS BETA ACTIVITY IN NON-SALINE WATER - THIN SOURCE DEPOSIT METHOD (ISO 10704:2009)
UNE-EN 16924:2018 Foodstuffs - Determination of zearalenone in edible vegetable oils by LC-FLD or LC-MS/MS
NF EN 60904-4 : 2010 PHOTOVOLTAIC DEVICES - PART 4: REFERENCE SOLAR DEVICES - PROCEDURES FOR ESTABLISHING CALIBRATION TRACEABILITY
UNI EN 15234-1 : 2011 SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 1: GENERAL REQUIREMENTS
I.S. EN 62670-2:2015 PHOTOVOLTAIC CONCENTRATORS (CPV) - PERFORMANCE TESTING - PART 2: ENERGY MEASUREMENT
UNI CEN ISO/TS 15877-7 : 2009 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
TS 103 052 : 1.1.1 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); RADIATED MEASUREMENT METHODS AND GENERAL ARRANGEMENTS FOR TEST SITES UP TO 100 GHZ
NASA-STD-8739.12:2018 METROLOGY & CALIBRATION
RSSB GE/GN8570 : ISSUE 2 GUIDANCE ON THE MANAGEMENT OF DRUGS AND ALCOHOL
BS EN 304:2017 Heating boilers. Test code for heating boilers for atomizing oil burners
S.R. CEN/TS 15658:2007 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC FIBRES AT HIGH TEMPERATURE UNDER NON-REACTIVE ENVIRONMENT - DETERMINATION OF CREEP BEHAVIOUR BY THE HOT END METHOD
BS 2000-508(2003) : 2003 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL QUALITY - FUEL QUALITY MONITORING SYSTEM (FQMS)
UNI CEN ISO/TS 22391-7 : 2012 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
I.S. EN 15595:2009 RAILWAY APPLICATIONS - BRAKING - WHEEL SLIDE PROTECTION
ISO 12828-2:2016 Validation method for fire gas analysis Part 2: Intralaboratory validation of quantification methods
ASTM E 925 : 2009 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
ASTM E 2972 : 2015 Standard Guide for Production, Testing, and Value Assignment of In-House Reference Materials for Metals, Ores, and Other Related Materials
ASTM E 3141/E3141M : 2018 Standard Test Method for Ballistic Resistant Shields for Law Enforcement
ASTM C 1840/C1840M : 2017 Standard Practice for Inspection and Acceptance of Installed Reinforced Concrete Culvert, Storm Drain, and Storm Sewer Pipe
UNE-EN 16479:2014 Water quality - Performance requirements and conformity test procedures for water monitoring equipment - Automated sampling devices (samplers) for water and waste water
CEI EN 50383 : 2013 BASIC STANDARD FOR THE CALCULATION AND MEASUREMENT OF ELECTROMAGNETIC FIELD STRENGTH AND SAR RELATED TO HUMAN EXPOSURE FROM RADIO BASE STATIONS AND FIXED TERMINAL STATIONS FOR WIRELESS TELECOMMUNICATION SYSTEMS (110 MHZ - 40 GHZ)
ASTM F 2660 : 2013 : REDLINE Standard Test Method for Qualifying Coatings for Use on A490 Structural Bolts Relative to Environmental Hydrogen Embrittlement
EN 1568-4:2018 Fire extinguishing media - Foam concentrates - Part 4: Specification for low expansion foam concentrates for surface application to water-miscible liquids
ASTM E 2655 : 2014 : REDLINE Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods
ASTM E 1370 : 2014 : REDLINE Standard Guide for Air Sampling Strategies for Worker and Workplace Protection
CEI EN 50215 : 2011 RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE
UNI EN ISO 16495 : 2013 PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - TEST METHODS
BS ISO 22197-3:2011 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials Removal of toluene
NF EN ISO 3266 : 2010 AMD 1 2016 FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES
UNI EN ISO 16187 : 2013 FOOTWEAR AND FOOTWEAR COMPONENTS - TEST METHOD TO ASSESS ANTIBACTERIAL ACTIVITY
NF EN 50238 : 2003 RAILWAY APPLICATIONS - COMPATIBILITY BETWEEN ROLLING STOCK AND TRAIN DETECTION SYSTEMS
ASTM E 2913 : 2014 Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples
ASTM D 6792 : 2017 : REDLINE Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
ASTM F 2838 : 2017 : REDLINE Standard Practice for Accelerated Laboratory Aging of Radial Passenger Car and Light Truck Tires through Load Range E for the Laboratory Generation of Belt Separation
ASTM D 7776 : 2012 Standard Guide for Self-Assessment of Quality System Practices in Petroleum Products and Lubricant Testing Laboratories (Withdrawn 2017)
UNI EN ISO 11960 : 2014 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS
CEN/TS 17061:2017 Foodstuffs - Guidelines for the calibration and quantitative determination of pesticide residues and organic contaminants using chromatographic methods
ASTM E 1324 : 2016 : REDLINE Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments
I.S. EN ISO 16000-12:2008 INDOOR AIR - PART 12: SAMPLING STRATEGY FOR POLYCHLORINATED BIPHENYLS (PCBS), POLYCHLORINATED DIBENZO-P-DIOXINS (PCDDS), POLYCHLORINATED DIBENZOFURANS (PCDFS) AND POLYCYCLIC AROMATIC HYDROCARBONS (PAHS)
ASTM E 2594 : 2009 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method)
I.S. EN ISO 15194:2009 IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION
UNE-EN 62108:2011 Concentrator photovoltaic (CPV) modules and assemblies - Design qualification and type approval
I.S. EN 15461:2008 RAILWAY APPLICATIONS - NOISE EMISSION - CHARACTERISATION OF THE DYNAMIC PROPERTIES OF TRACK SECTIONS FOR PASS BY NOISE MEASUREMENTS
PD ISO/TS 17137:2014 Cardiovascular implants and extracorporeal systems. Cardiovascular absorbable implants
ISO/TS 21098:2005 Foodstuffs Nucleic acid based methods of analysis of genetically modified organisms and derived products Information to be supplied and procedure for the addition of methods to ISO 21569, ISO 21570 or ISO 21571
ISO 10993-4:2017 Biological evaluation of medical devices — Part 4: Selection of tests for interactions with blood
I.S. EN 15633-1:2009 FOODSTUFFS - DETECTION OF FOOD ALLERGENS BY IMMUNOLOGICAL METHODS - PART 1: GENERAL CONSIDERATIONS
IWA 14-1:2013 Vehicle security barriers — Part 1: Performance requirement, vehicle impact test method and performance rating
ISO 15176:2019 Guidance on characterization of excavated soil and other materials intended for re-use
ISO 17172:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of compaction properties of ceramic powders
ASTM E 2594 : 2009 : R2014 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method)
ASTM D 6568 : 2000 : R2006 Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples
ASTM E 2371 : 2013 Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)
IEC PAS 63125:2017 Clothes washing machines for commercial use - Methods for measuring the performance
ASTM D 3856 : 2011 Standard Guide for Management Systems in Laboratories Engaged in Analysis of Water
IEC Q 03-4 : 3.0 IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PRODECURE - PART 4: IECQ AVIONICS SCHEME - AVIONICS PARTS AND ASSEMBLY MANAGEMENT
ASTM D 7557/D7557M : 2009 : R2013 : EDT 1 Standard Practice for Sampling of Expanded Polystyrene Geofoam Specimens
ASTM C 1128 : 2018 : REDLINE Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials
ASTM E 2165 : 2001 Standard Practice for Establishing an Uncertainty Budget for the Chemical Analysis of Metals, Ores, and Related Materials (Withdrawn 2007)
NFPA 1801 : 2018 THERMAL IMAGERS FOR THE FIRE SERVICE
NFPA 1953 : 2016 PROTECTIVE ENSEMBLES FOR CONTAMINATED WATER DIVING
ISO 4359:2013 Flow measurement structures — Rectangular, trapezoidal and U-shaped flumes
NFPA 1952 : 2015 SURFACE WATER OPERATIONS PROTECTIVE CLOTHING AND EQUIPMENT
I.S. EN 61215:2005 CRYSTALLINE SILICON TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL
EN 1263-1:2014 Temporary works equipment - Safety nets - Part 1: Safety requirements, test methods
NFPA 1977 : 2016 PROTECTIVE CLOTHING AND EQUIPMENT FOR WILDLAND FIRE FIGHTING
ISO 14180:2017 Solid mineral fuels — Guidance on the sampling of coal seams
EN ISO 26423:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of coating thickness by crater-grinding method (ISO 26423:2009)
I.S. EN 14382:2005 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
NFPA 18A : 2017 WATER ADDITIVES FOR FIRE CONTROL AND VAPOR MITIGATION
ISO 11665-5:2012 Measurement of radioactivity in the environment Air: radon-222 Part 5: Continuous measurement method of the activity concentration
DIN EN 15085-2:2008-01 RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 2: QUALITY REQUIREMENTS AND CERTIFICATION OF WELDING MANUFACTURER
NFPA 1986 : 2017 RESPIRATORY PROTECTION EQUIPMENT FOR TACTICAL AND TECHNICAL OPERATIONS
IEC 60456:2010 Clothes washing machines for household use - Methods for measuring the performance
NFPA 18 : 2017 WETTING AGENTS
EN 285:2015 Sterilization - Steam sterilizers - Large sterilizers
NFPA 1982 : 2018 Standard on Personal Alert Safety Systems (PASS)
ISO 6141:2015 Gas analysis Contents of certificates for calibration gas mixtures
DIN EN 13763-26:2004-11 Explosives for civil uses - Detonators and relays - Part 26: Definitions, methods and requirements for devices and accessories for reliable and safe function of detonators and relays; German version EN 13763-26:2004
DIN EN 14241-1:2013-11 CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS
DIN EN ISO 11140-1:2015-03 Sterilization of health care products - Chemical indicators - Part 1: General requirements (ISO 11140-1:2014)
DIN EN 13422:2009-08 VERTICAL ROAD SIGNS - PORTABLE DEFORMABLE WARNING DEVICES AND DELINEATORS - PORTABLE ROAD TRAFFIC SIGNS - CONES AND CYLINDERS
DIN EN 14212 E : 2012 AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF SULPHUR DIOXIDE BY ULTRAVIOLET FLUORESCENCE
DIN EN 13796-2 E : 2006 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 2: SLIPPING RESISTANCE TESTS FOR GRIPS
DIN EN ISO 17932:2011-12 Palm oil - Determination of the deterioration of bleachability index (DOBI) and carotene content (ISO 17932:2011)
DIN EN 14275 E : 2013 AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL FUEL QUALITY - SAMPLING FROM RETAIL SITE PUMPS AND COMMERCIAL SITE FUEL DISPENSERS
DIN EN 14375 E : 2016 CHILD-RESISTANT NON-RECLOSABLE PACKAGING FOR PHARMACEUTICAL PRODUCTS - REQUIREMENTS AND TESTING
DIN EN 12732:2014-07 Gas infrastructure - Welding steel pipework - Functional requirements (includes Amendment A1:2014)
DIN EN ISO 16000-7 E : 2007 INDOOR AIR - PART 7: SAMPLING STRATEGY FOR DETERMINATION OF AIRBORNE ASBESTOS FIBRE CONCENTRATIONS
DIN EN 14242 E : 2004 ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTRAL ANALYSIS
DIN EN ISO 6508-2:2015-06 Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015); German version EN ISO 6508-2:2015
DIN EN 1048:2014-11 HEAT EXCHANGERS - AIR COOLED LIQUID COOLERS ('DRY COOLERS') - TEST PROCEDURES FOR ESTABLISHING THE PERFORMANCE
DIN EN 1906:2012-12 BUILDING HARDWARE - LEVER HANDLES AND KNOB FURNITURE - REQUIREMENTS AND TEST METHODS
DIN EN 12572-1:2015-07 (Draft) ARTIFICIAL CLIMBING STRUCTURES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR ACS WITH PROTECTION POINTS
DIN EN ISO 16000-2 E : 2006 INDOOR AIR - PART 2: SAMPLING STRATEGY FOR FORMALDEHYDE
DIN EN ISO 11137-3:2015-08 (Draft) STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL (ISO 11137-3:2017)
EN ISO 10993-9:2009 Biological evaluation of medical devices - Part 9: Framework for identification and quantification of potential degradation products (ISO 10993-9:2009)
DIN EN ISO 6508-3:2015-06 Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015)
DIN EN 14382 E : 2009 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
BS EN 1143-2:2014 Secure storage units. Requirements, classification and methods of tests for resistance to burglary Deposit systems
BS EN ISO 23667:2007 Packaging. Transport packaging for dangerous goods. Rigid plastics and plastics composite IBCs. Compatibility testing
BS EN ISO 12402-7 : 2007 PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
BS EN ISO 14310:2008 Petroleum and natural gas industries. Downhole equipment. Packers and bridge plugs
BS EN 13631-10:2003 Explosives for civil uses. High explosives Method for the verification of the means of initiation
BS EN 843-2:2006 Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature Determination of Young\'s modulus, shear modulus and Poisson\'s ratio
BS EN 13630-11:2002 Explosives for civil uses. Detonating cords and safety fuses Determination of velocity of detonation of detonating cords
BS EN 12094-2:2003 Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for non-electrical automatic control and delay devices
BS EN 14996:2006 Water quality. Guidance on assuring the quality of biological and ecological assessments in the aquatic environment
BS EN 13980:2002 Potentially explosive atmospheres. Application of quality systems
BS EN 1071-4:2006 Advanced technical ceramics. Methods of test for ceramic coatings Determination of chemical composition by electron probe microanalysis (EPMA)
BS EN 845-2 : 2013 SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
BS EN 12341:2014 Ambient air. Standard gravimetric measurement method for the determination of the PM<sub>10</sub> or PM<sub>2,5</sub> mass concentration of suspended particulate matter
BS EN 725-4:2006 Advanced technical ceramics. Methods of test for ceramic powders Determination of oxygen content in aluminium nitride by XRF analysis
ISO/TS 25377:2007 Hydrometric uncertainty guidance (HUG)
BS EN 13104 : 2009 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - POWERED AXLES - DESIGN METHOD
UNE-EN ISO 3381:2011 Railway applications - Acoustics - Measurement of noise inside railbound vehicles (ISO 3381:2005)
BS EN ISO 10993-1 : 2009-10 BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS (ISO 10993-1:2009)
DIN EN 15335 E : 2007 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - DETERMINATION OF ELASTIC PROPERTIES BY RESONANT BEAM METHOD UP TO 2000 DEGREE C
BS EN 821-3:2005 Advanced technical ceramics. Monolithic ceramics. Thermo-physical properties Determination of specific heat capacity
BS EN 14122:2014 Foodstuffs. Determination of vitamin B1 by high performance liquid chromatography
BS EN ISO 16000-7:2007 Indoor air Sampling strategy for determination of airborne asbestos fibre concentrations
BS EN ISO 14577-2:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters Verification and calibration of testing machines
ISO 10993-9:2009 Biological evaluation of medical devices Part 9: Framework for identification and quantification of potential degradation products
UNE-EN ISO 21570:2008 Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Quantitative nucleic acid based methods (ISO 21570:2005)
16/30330036 DC : 0 BS EN 62788-2 - MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 2: POLYMERIC MATERIALS USED FOR FRONTSHEETS AND BACKSHEETS
UNE-EN 14181:2015 Stationary source emissions - Quality assurance of automated measuring systems
UNE-EN 13067:2014 Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies
BS EN ISO 3452-2:2013 Non-destructive testing. Penetrant testing Testing of penetrant materials
BS EN 725-8:2006 Advanced technical ceramics. Methods of test for ceramic powders Determination of tapped bulk density
BS EN 877 : 1999 CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
BS EN 14181:2014 Stationary source emissions. Quality assurance of automated measuring systems
EN 197-2:2014 Cement - Part 2: Conformity evaluation
BS EN 12668-1:2010 Non-destructive testing. Characterization and verification of ultrasonic examination equipment Instruments
BS EN 623-4:2004 Advanced technical ceramics. Monolithic ceramics. General and textural properties Determination of surface roughness
UNE-EN ISO 16148:2016 Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing (ISO 16148:2016)
ISO 12402-7:2006 Personal flotation devices Part 7: Materials and components Safety requirements and test methods
BS EN 13451-1 : 2011 SWIMMING POOL EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
BS EN ISO 11140-1:2014 Sterilization of health care products. Chemical indicators General requirements
BS EN 13763-15:2004 Explosives for civil uses. Detonators and relays Determination of equivalent initiating capability
IEC 61400-2:2013 Wind turbines - Part 2: Small wind turbines
BS EN 15335:2007 Advanced technical ceramics. Ceramic composites. Determination of elastic properties by resonant beam method up to 2000°C
ISO 26424:2008 Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of the abrasion resistance of coatings by a micro-scale abrasion test
BS EN 1071-6:2007 Advanced technical ceramics. Methods of test for ceramic coatings Determination of the abrasion resistance of coatings by a micro-abrasion wear test
BS EN 15204:2006 Water quality. Guidance standard on the enumeration of phytoplankton using inverted microscopy (Utermoehl technique)
ISO 20349:2010 Personal protective equipment Footwear protecting against thermal risks and molten metal splashes as found in foundries and welding Requirements and test method
BS EN ISO 11960:2014 Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells
UNE-EN ISO 16000-26:2014 Indoor air - Part 26: Sampling strategy for carbon dioxide (CO2) (ISO 16000-26:2012)
BS EN 13631-4:2002 Explosives for civil uses. High explosives Determination of sensitiveness to impact of explosives
BS EN 13763-26:2004 Explosives for civil uses. Detonators and relays Definitions, methods and requirements for devices and accessories for reliable and safe functioning of detonators and relays
BS EN 14382 : 2005 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
BS EN 14241-1:2013 Chimneys. Elastomeric seals and elastomeric sealants. Material requirements and test methods Seals in flue liners
ISO/IEC 17043:2010 Conformity assessment — General requirements for proficiency testing
BS EN 13630-2:2002 Explosives for civil uses. Detonating cords and safety fuses Determination of thermal stability of detonating cords and safety fuses
BS EN 303-5:2012 Heating boilers Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW. Terminology, requirements, testing and marking
IEC 60904-10:2009 Photovoltaic devices - Part 10: Methods of linearity measurement
14/30278953 DC : 0 BS ISO 17842-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE
UNE-EN ISO 14161:2010 Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results (ISO 14161:2009)
BS EN 14662-4:2005 Ambient air quality. Standard method for measurement of benzene concentrations Diffusive sampling followed by thermal desorption and gas chromatography
ISO 22975-2:2016 Solar energy Collector components and materials Part 2: Heat-pipes for solar thermal application Durability and performance
BS EN 13528-1:2002 Ambient air quality. Diffusive samplers for the determination of concentrations of gases and vapours. Requirements and test methods General requirements
BS EN 13631-16:2004 Explosives for civil uses. High explosives Detection and measurement of toxic gases
ISO 9394:2012 Ophthalmic optics — Contact lenses and contact lens care products — Determination of biocompatibility by ocular study with rabbit eyes
IEC 60068-2-64:2008 Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
IEC 62431:2008 Reflectivity of electromagnetic wave absorbers in millimetre wave frequency - Measurement methods
BS EN 12094-8:2006 Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for connectors
BS EN ISO 9394:2012 Ophthalmic optics. Contact lenses and contact lens care products. Determination of biocompatibility by ocular study with rabbit eyes
UNE-EN ISO 21572:2013 Foodstuffs - Molecular biomarker analysis - Protein-based methods (ISO 21572:2013)
DEFSTAN 59-411(PT1)/2(2014) : 2014 ELECTROMAGNETIC COMPATIBILITY - PART 1: MANAGEMENT AND PLANNING
BS EN 725-11:2006 Advanced technical ceramics. Methods of test for ceramic powders Determination of densification on natural sintering
BS EN ISO 16000-1:2006 Indoor air General aspects of sampling strategy
ISO 11665-2:2012 Measurement of radioactivity in the environment Air: radon-222 Part 2: Integrated measurement method for determining average potential alpha energy concentration of its short-lived decay products
BS EN 12082:2017 Railway applications. Axleboxes. Performance testing
BS EN 12094-13:2001 Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for check valves and non-return valves
BS EN 13616:2004 Overfill prevention devices for static tanks for liquid petroleum fuels
BS EN 13630-9:2004 Explosives for civil uses. Detonating cords and safety fuses Determination of transmission of detonation from detonating cord to detonating cord
BS EN ISO 14161:2009 Sterilization of health care products. Biological indicators. Guidance for the selection, use and interpretation of results
ISO 6142:2001 Gas analysis Preparation of calibration gas mixtures Gravimetric method
BS EN 13938-6:2004 Explosives for civil uses. Propellants and rocket propellants Solid rocket propellants. Guide for the determination of integrity of inhibitor coatings
IEC 60068-2-80:2005 Environmental testing - Part 2-80: Tests - Test Fi: Vibration - Mixed mode
BS EN 584-1:2006 Non-destructive testing. Industrial radiographic film Classification of film systems for industrial radiography
ISO 11140-1:2014 Sterilization of health care products Chemical indicators Part 1: General requirements
I.S. EN ISO 14577-2:2015 METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 14577-2:2015)
I.S. EN 442-2:2014 RADIATORS AND CONVECTORS - PART 2: TEST METHODS AND RATING
DIN EN 13631-3:2004-11 Explosives for civil uses - High explosives - Part 3: Determination of sensitiveness to friction of explosives; German version EN 13631-3:2004
I.S. EN ISO 15189:2012 MEDICAL LABORATORIES - REQUIREMENTS FOR QUALITY AND COMPETENCE (ISO 15189:2012, CORRECTED VERSION 2014-08-15)
I.S. EN 15330-1:2013 SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE
CEN/TS 14972:2011 Fixed firefighting systems - Watermist systems - Design and installation
CEN/TS 16800:2015 GUIDELINE FOR THE VALIDATION OF PHYSICO-CHEMICAL ANALYTICAL METHODS
I.S. EN ISO 21187:2005 MILK - QUANTITATIVE DETERMINATION OF BACTERIOLOGICAL QUALITY - GUIDANCE FOR ESTABLISHING AND VERIFYING A CONVERSION RELATIONSHIP BETWEEN ROUTINE METHOD RESULTS AND ANCHOR METHOD RESULTS
CEN/TS 1948-5:2015 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 5: Long-term sampling of PCDDs/PCDFs and PCBs
EN ISO 24443:2012 Determination of sunscreen UVA photoprotection in vitro (ISO 24443:2012)
DIN EN 14996:2006-08 Water quality - Guidance on assuring the quality of biological and ecological assessments in the aquatic environment
I.S. EN 877:2000 CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
DIN EN 821-3:2005-04 Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 3: Determination of specific heat capacity
DIN EN 15192:2007-02 Characterisation of waste and soil - Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection
CEN/TS 16115-1:2011 Ambient air quality - Measurement of bioaerosols - Part 1: Determination of moulds using filter sampling systems and culture-based analyses
EN 62670-2:2015 Photovoltaic concentrators (CPV) - Performance testing - Part 2: Energy measurement
EN 1069-1:2017 Water slides - Part 1: Safety requirements and test methods
DIN EN 15549:2008-06 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air
CEN/TS 15127-1:2005 HEALTH INFORMATICS - TESTING OF PHYSIOLOGICAL MEASUREMENT SOFTWARE - PART 1: GENERAL
DIN EN 14152:2003-10 FOODSTUFFS - DETERMINATION OF VITAMIN B2 BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY
DIN EN ISO 21148:2017-09 COSMETICS - MICROBIOLOGY - GENERAL INSTRUCTIONS FOR MICROBIOLOGICAL EXAMINATION (ISO 21148:2017)
EN 10247:2017 Micrographic examination of the non-metallic inclusion content of steels using standard pictures
EN 61400-23:2014 Wind turbines - Part 23: Full-scale structural testing of rotor blades
EN 12506:2003 Characterization of waste - Analysis of eluates - Determination of pH, As, Ba, Cd, Cl-, Co, Cr, Cr Vl, Cu, Mo, Ni, NO2-, Pb, total S, SO42-, V and Zn
EN 1071-10:2009 Advanced technical ceramics - Methods of test for ceramic coatings - Part 10: Determination of coating thickness by cross sectioning
NF EN ISO 11737-2 : 2010 STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS
EN 12101-1:2005/A1:2006 SMOKE AND HEAT CONTROL SYSTEMS - PART 1: SPECIFICATION FOR SMOKE BARRIERS
EN 62321-1:2013 Determination of certain substances in electrotechnical products - Part 1: Introduction and overview
CEN/TS 16115-2:2016 Ambient air - Measurement of bioaerosols - Part 2: Planning and evaluation of plant-related plume measurements
EN 1143-2:2014 Secure storage units - Requirements, classification and methods of tests for resistance to burglary - Part 2: Deposit systems
CEN/TS 13598-3:2012 Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride)(PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Guidance for assessment of conformity
EN 61400-2:2014 Wind turbines - Part 2: Small wind turbines
EN 50513:2009 Solar wafers - Data sheet and product information for crystalline silicon wafers for solar cell manufacturing
CEN/TS 1071-11 : 2005 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 11: DETERMINATION OF INTERNAL STRESS BY THE STONEY FORMULA
EN ISO 17161:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Ceramic composites - Determination of the degree of misalignment in uniaxial mechanical tests (ISO 17161:2014)
DIN EN 14186:2008-02 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of elastic properties by an ultrasonic technique
CEN/TS 1071-7 : 2003 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 7: DETERMINATION OF HARDNESS AND YOUNG&#39;S MODULUS BY INSTRUMENTED INDENTATION TESTING
CEN/TR 15642:2011 Unified tests procedures for the tests of EN 3-7:2004+A1:2007
EN 1071-12:2010 Advanced technical ceramics - Methods of test for ceramic coatings - Part 12: Reciprocating wear test
IEC 61133:2016 RLV Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service
DIN EN ISO 21187:2006-01 Milk - Quantitative determination of bacteriological quality - Guidance for establishing and verifying a conversion relationship between routine method results and anchor method results (ISO 21187:2004)
DIN EN ISO 376:2011-09 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:2011)
EN 14425-3:2010 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 3: Chevron notched beam (CNB) method
EN ISO 6508-2:2015 Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015)
EN 13183-3:2005 Moisture content of a piece of sawn timber - Part 3: Estimation by capacitance method
DIN EN 15496:2008-04 Cycles - Requirements and test methods for cycle locks
CEN/TS 15119-2:2012 DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - DETERMINATION OF EMISSIONS FROM PRESERVATIVE TREATED WOOD TO THE ENVIRONMENT - PART 2: WOODEN COMMODITIES EXPOSED IN USE CLASS 4 OR 5 (IN CONTACT WITH THE GROUND, FRESH WATER OR SEA WATER) - LABORATORY METHOD
CEN/TS 1453-2:2017 Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity
DIN EN ISO 20349:2011-03 PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR PROTECTING AGAINST THERMAL RISKS AND MOLTEN METAL SPLASHES AS FOUND IN FOUNDRIES AND WELDING - REQUIREMENTS AND TEST METHOD
EN 12823-1:2014 Foodstuffs - Determination of vitamin A by high performance liquid chromatography - Part 1: Measurement of all-E-retinol and 13-Z-retinol
EN 1071-9:2009 Advanced technical ceramics - Methods of test for ceramic coatings - Part 9: Determination of fracture strain
CEN/TS 15634-5:2016 Foodstuffs - Detection of food allergens by molecular biological methods - Part 5: Mustard (Sinapis alba) and soya (Glycine max) - Qualitative detection of a specific DNA sequence in cooked sausages by real-time PCR
IEC 61204-3:2016 RLV Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC)
EN 62479:2010 Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz)
DIN EN 13630-10:2005-08 Explosives for civil uses - Detonating cords and safety fuses - Part 10: Determination of initiating capability of detonating cords
DIN ISO 15632:2015-11 Microbeam analysis - Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis (ISO 15632:2012)
DIN EN ISO 16000-2:2006-06 Indoor air - Part 2: Sampling strategy for formaldehyde (ISO 16000-2:2004)
CEN/TS 12666-2:2012 Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity
EN 62008:2005 Performance characteristics and calibration methods for digital data acquisition systems and relevant software
EN 61215:2005 Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval
CEN/TS 14425-3 : 2003 ADVANCED TECHNICAL CERAMICS - TEST METHODS FOR DETERMINATION OF FRACTURE TOUGHNESS OF MONOLITHIC CERAMICS - PART 3: CHEVRON NOTCHED BEAM (CNB) METHOD
CEN/TR 15592:2007 Health services - Quality management systems - Guide for the use of EN ISO 9004:2000 in health services for performance improvement
EN 60601-1-2:2015 Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests
CEN/TS 13476-4:2013 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 4: Guidance for the assessment of conformity
CEN ISO/TS 20836:2005 Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Performance testing for thermal cyclers (ISO/TS 20836:2005)
EN ISO 19901-5:2016 Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5: Weight control during engineering and construction (ISO 19901-5:2016)
EN 1007-6:2007 Advanced technical ceramic - Ceramic composites - Methods of test for reinforcements - Part 6: Determination of tensile properties of filaments at high temperature
EN 1071-6:2007 Advanced technical ceramics - Methods of test for ceramic coatings - Part 6: Determination of the abrasion resistance of coatings by a micro-abrasion wear test
EN 12094-11 : 2003 FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 11: REQUIREMENTS AND TEST METHODS FOR MECHANICAL WEIGHING DEVICES
EN 12668-1:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments
DIN EN ISO 16140:2003-09 MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - PROTOCOL FOR THE VALIDATION OF ALTERNATIVE METHODS (ISO 16140:2003 + AMD.1:2011)
EN 61577-4:2014 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 4: Equipment for the production of reference atmospheres containing radon isotopes and their decay products (STAR)
CEN/TS 15674:2007 Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods
CEN/TS 843-6 : 2004 ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - MECHANICAL PROPERTIES AT ROOM TEMPERATURE - PART 6: GUIDANCE FOR FRACTOGRAPHIC INVESTIGATION
CEN/TR 16184:2011 Characterization of Waste - State-of-the-art document - Analysis of eluates
EN 12572-1:2017 Artificial climbing structures - Part 1: Safety requirements and test methods for ACS with protection points
EN ISO 20502:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of adhesion of ceramic coatings by scratch testing (ISO 20502:2005 including Cor 1:2009)
EN ISO 11140-1:2014 Sterilization of health care products - Chemical indicators - Part 1: General requirements (ISO 11140-1:2014)
CEN/TS 1852-2:2015 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity
CEN/TS 1566-2:2012 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Guidance for assessment of conformity
DIN EN 10247:2017-09 MICROGRAPHIC EXAMINATION OF THE NON-METALLIC INCLUSION CONTENT OF STEELS USING STANDARD PICTURES
EN 15234-1:2011 Solid biofuels - Fuel quality assurance - Part 1: General requirements
UNI EN 877 : 2007 CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
DIN EN ISO 707:2009-01 MILK AND MILK PRODUCTS - GUIDANCE ON SAMPLING
DIN EN 14907:2005-11 AMBIENT AIR QUALITY - STANDARD GRAVIMETRIC MEASUREMENT METHOD FOR THE DETERMINATION OF THE PM[2,5] MASS FRACTION OF SUSPENDED PARTICULATE MATTER
EN ISO 26424:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of the abrasion resistance of coatings by a micro-scale abrasion test (ISO 26424:2008)
CEN ISO/TS 25377:2007 Hydrometric uncertainty guidance (HUG) (ISO/TS 25377:2007)
DIN EN 1069-1:2017-11 WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS
DIN EN ISO 20079:2006-12 WATER QUALITY - DETERMINATION OF THE TOXIC EFFECT OF WATER CONSTITUENTS AND WASTE WATER ON DUCKWEED (LEMNA MINOR) - DUCKWEED GROWTH INHIBITION TEST
CEN/TR 15983:2010 Stationary source emissions - Guidance on the application of EN 14181:2004
CEN/TS 15866:2009 Advanced technical ceramics - Ceramic composites - Determination of the thermal diffusivity of ceramic fibres
EN 50500 : 2008 AMD 1 2015 MEASUREMENT PROCEDURES OF MAGNETIC FIELD LEVELS GENERATED BY ELECTRONIC AND ELECTRICAL APPARATUS IN THE RAILWAY ENVIRONMENT WITH RESPECT TO HUMAN EXPOSURE
EN 13103:2009+A2:2012 Railway applications - Wheelsets and bogies - Non powered axles - Design method
EN 13422:2004+A1:2009 Vertical road signs - Portable deformable warning devices and delineators - Portable road traffic signs - Cones and cylinders
EN 15296:2011 Solid biofuels - Conversion of analytical results from one basis to another
EN 1148:1998/A1:2005 Heat exchangers - Water to water heat exchangers for district heating - Test procedures for establishing the performance data
EN 1071-2 : 2002 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 2: DETERMINATION OF COATING THICKNESS BY THE CRATER GRINDING METHOD
EN 12062:1997/A2:2003 NON-DESTRUCTIVE EXAMINATION OF WELDS - GENERAL RULES FOR METALLIC MATERIALS
CEN/TS 1455-2:2012 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Guidance for the assessment of conformity
I.S. EN 1159-3:2003 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES, THERMOPHYSICAL PROPERTIES - PART 3: DETERMINATION OF SPECIFIC HEAT CAPACITY
EN 62369-1:2009 Evaluation of human exposure to electromagnetic fields from short range devices (SRDs) in various applications over the frequency range 0 GHz to 300 GHz - Part 1: Fields produced by devices used for electronic article surveillance, radio frequency identification and similar systems
EN 61730-2:2007/A1:2012 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING (IEC 61730-2:2004/A1:2011)
DIN EN 14242:2004-12 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis
EN 843-6:2009 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 6: Guidance for fractographic investigation
EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers
ONORM EN ISO 10703 : 2015 WATER QUALITY - DETERMINATION OF THE ACTIVITY CONCENTRATION OF RADIONUCLIDES - METHOD BY HIGH RESOLUTION GAMMA-RAY SPECTROMETRY (ISO 10703:2007)
EN 61481-1:2014 Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
CEN/TS 15658:2007 Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature under non-reactive environment - Determination of creep behaviour by the hot end method
DIN EN ISO 15025:2017-04 PROTECTIVE CLOTHING - PROTECTION AGAINST FLAME - METHOD OF TEST FOR LIMITED FLAME SPREAD (ISO 15025:2016)
DIN EN ISO 16140:2011-12 MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - PROTOCOL FOR THE VALIDATION OF ALTERNATIVE METHODS (ISO 16140:2003 + AMD.1:2011)
CEN/TR 16478:2012 Surveillance from first commissioning on measuring devices used in natural gas supply to the installations of the activities under the Directive 2003/87/EC establishing a scheme of CO2 emissions trading
CEN/TS 15518-4:2013 Winter maintenance equipment - Road weather information systems - Part 4: Test methods for stationary equipment
CEN/TS 15234:2006 Solid biofuels - Fuel quality assurance
EN ISO 23667:2007 Packaging - Transport packaging for dangerous goods - Rigid plastics and plastics composite IBCs - Compatibility testing (ISO 23667:2007)
EN 13616:2004/AC:2006 OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS
EN ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:2011)
ONORM EN ISO 3452-2 : 2014 NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 2: TESTING OF PENETRANT MATERIALS (ISO 3452-2:2013)
UNI EN 12732 : 2014 GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS
EN 877:1999/A1:2006/AC:2008 CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
EN 12094-12:2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 12: Requirements and test methods for pneumatic alarm devices
EN 13352:2012 Specification for the performance of automatic tank contents gauges
EN 60945:2002 Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results
EN 62788-1-2:2016 Measurement procedures for materials used in photovoltaic modules - Part 1-2: Encapsulants - Measurement of volume resistivity of photovoltaic encapsulants and other polymeric materials
EN ISO/IEC 17050-1:2010 Conformity assessment - Supplier's declaration of conformity - Part 1: General requirements (ISO/IEC 17050-1:2004, corrected version 2007-06-15)
EN 1303:2015 Building hardware - Cylinders for locks - Requirements and test methods
EN 820-5:2009 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures
EN ISO 18812:2003 Health informatics - Clinical analyser interfaces to laboratry information systems - Use profiles (ISO 18812:2003)
EN 1071-1 : 2003 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 1: DETERMINATION OF COATING THICKNESS BY CONTACT PROBE FILOMETER
CEN/TS 15675:2007 Air quality - Measurement of stationary source emissions - Application of EN ISO/IEC 17025:2005 to periodic measurements
EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
EN 12094-3:2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 3: Requirements and test methods for manual triggering and stop devices
EN 12094-13:2001/AC:2002 FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 13: REQUIREMENTS AND TEST METHODS FOR CHECK VALVES AND NON-RETURN VALVES
EN 12094-2:2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 2: Requirements and test methods for non-electrical automatic control and delay devices
EN 62129-2 : 2011 CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS
EN 12767:2007 Passive safety of support structures for road equipment - Requirements, classification and test methods
EN 60060-2:2011 High-voltage test techniques - Part 2: Measuring systems
EN ISO 6508-3:2015 Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015)
EN 12094-8:2006 Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors
EN 328:2014 Heat exchangers - Forced convection unit air coolers for refrigeration - Test procedures for establishing the performance
EN 12094-10:2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 10: Requirements and test methods for pressure gauges and pressure switches
CEN/TS 15634-3:2016 Foodstuffs - Detection of food allergens by molecular biological methods - Part 3: Hazelnut (Corylus avellana) - Qualitative detection of a specific DNA sequence in chocolate by real-time PCR
EN 12094-6:2006 Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices
DIN EN 15355:2011-01 RAILWAY APPLICATIONS - BRAKING - DISTRIBUTOR VALVES AND DISTRIBUTOR-ISOLATING DEVICES
EN 62475 : 2010 HIGH-CURRENT TEST TECHNIQUES - DEFINITIONS AND REQUIREMENTS FOR TEST CURRENTS AND MEASURING SYSTEMS
EN 15358:2011 Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels
EN 13054:2001 Packaging - Complete, filled transport packages - Test methods for the determination of the centre of gravity of a package
CEN/TR 16338 : 2012 FOODSTUFFS - DETECTION OF FOOD ALLERGENS - TEMPLATE FOR SUPPLYING INFORMATION ABOUT IMMUNOLOGICAL METHODS AND MOLECULAR BIOLOGICAL METHODS
CEN/TS 14425-5 : 2004 ADVANCED TECHNICAL CERAMICS - TEST METHODS FOR DETERMINATION OF FRACTURE TOUGHNESS OF MONOLITIC CERAMICS - PART 5: SINGLE-EDGE VEE-NOTCH BEAM (SEVNB) METHOD
MIL-DTL-83797 Revision C:2008 HOSE, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR
MIL-PRF-50884 Revision F:2014 Printed Wiring Board, Flexible or Rigid-Flex, General Specification for
MIL-DTL-83513 Revision G:2008 Connectors, Electrical, Rectangular, Microminiature, Polarized Shell, General Specification for
EN 50392:2004 Generic standard to demonstrate the compliance of electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz)
MIL-PRF-85045 Revision G:2014 Cables, Fiber Optic, General Specification for
MIL-DTL-24151 Revision B:2016 DOORS, ROLLER CURTAIN AND HINGED SLAT, AND ASSOCIATED OPERATING EQUIPMENT
MIL-DTL-27272 Revision D:2015 Fittings, Polytetrafluoroethylene Hose, High-Temperature, Medium-Pressure, General Specification for
ASME B89.1.7 : 2009 : R2014 PERFORMANCE STANDARD FOR STEEL MEASURING TAPES
MIL P 50884 : E PRINTED WIRING BOARD, FLEXIBLE OR RIGID-FLEX, GENERAL SPECIFICATION FOR
MIL-DTL-8790 Revision F:2007 Hose Assemblies, Rubber, Hydraulic, High Pressure 3,000 PSI, Operating Temperature Range -65 Degrees F to +275 Degrees F, Field Attachable
ASME B89.3.7 : 2013 GRANITE SURFACE PLATES
MIL-PRF-55110 Revision H:2014 Printed Wiring Board, Rigid, General Specification for
IPC 7092 : 0 DESIGN AND ASSEMBLY PROCESS IMPLEMENTATION FOR EMBEDDED COMPONENTS
EN 50361:2001 Basic standard for the measurement of Specific Absorption Rate related to human exposure to electromagnetic fields from mobile phones (300 MHz - 3 GHz)
IPC 5704 : 0 CLEANLINESS REQUIREMENTS FOR UNPOPULATED PRINTED BOARDS
MIL-DTL-6000 Revision D:2007 HOSE, RUBBER, AIRCRAFT, FUEL, OIL, COOLANT, WATER, AND ALCOHOL
ASME B89.1.7 : 2009 PERFORMANCE STANDARD FOR STEEL MEASURING TAPES
MIL-DTL-83796 Revision B:2008 HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR
IPC 4204 CHINESE : A2011 AMD 1 2013 FLEXIBLE METAL-CLAD DIELECTRICS FOR USE IN FABRICATION OF FLEXIBLE PRINTED CIRCUITRY
MIL-DTL-5523 Revision E:2011 VALVE; RELIEF, HYDRAULIC PRESSURE
MIL-DTL-32330 Revision A:2015 Hose Assembly, Conductive Polytetrafluoroethylene Tube, Smooth Bore, Flared and Flareless, Tube to Hose, with Swivel Nut
DEFSTAN 59-411(PT1)/1(2007) : 2007 ELECTROMAGNETIC COMPATIBILITY - PART 1: MANAGEMENT AND PLANNING
I.S. EN 13200-4:2006 SPECTATOR FACILITIES - PART 4: SEATS - PRODUCT CHARACTERISTICS
BS EN ISO 376:2011 Metallic materials. Calibration of force-proving instruments used for the verification of uniaxial testing machines
MIL-DTL-53126 Revision A:2012 POWER DISTRIBUTION, ILLUMINATION SYSTEMS, ELECTRICAL, GENERAL SPECIFICATION FOR
IPC 4204 : A FLEXIBLE METAL-CLAD DIELECTRICS FOR USE IN FABRICATION OF FLEXIBLE PRINTED CIRCUITRY
MIL-DTL-25579 Revision H:2014 Hose Assembly, Polytetrafluoroethylene, High Temperature, Medium Pressure, General Specification for
IEEE/ANSI C63.4-2014 American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz
ASHRAE 41.4 : 2015 STANDARD METHOD FOR MEASURING THE PROPORTION OF LUBRICANT IN LIQUID REFRIGERANT
MIL-DTL-8788 Revision G:2015 Hose, Rubber, Hydraulic, High Pressure 3,000 PSI, Operating Temperature Range -65 Degrees F to +160 Degrees F
MIL-DTL-12606 Revision E:2000 LOUDSPEAKER, PERMANENT MAGNET (UNENCASED, 3-INCH AND 4-INCH DIAMETER CONE, 2-WATT; FUNGUS-, AND IMMERSION-RESISTANT), TYPE LS-445/U, M12606-01, AND M12606-02
BS EN 62670-2:2015 Photovoltaic concentrators (CPV). Performance testing Energy measurement
ISO/IEC 29142-3:2013 Information technology — Print cartridge characterization — Part 3: Environment
I.S. CEN TS 15127-1:2005 HEALTH INFORMATICS - TESTING OF PHYSIOLOGICAL MEASUREMENT SOFTWARE - PART 1: GENERAL
BS ISO 21360-1:2012 Vacuum technology. Standard methods for measuring vacuum-pump performance General description
10/30196986 DC : 0 BS EN ISO 16000-26 - INDOOR AIR - PART 26: MEASUREMENT STRATEGY FOR CARBON DIOXIDE (CO[2])
I.S. EN ISO 21809-3:2016 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016)
ISO 14627:2012 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture resistance of silicon nitride materials for rolling bearing balls at room temperature by indentation fracture (IF) method
10/30207290 DC : 0 BS EN 62129-2 - CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS
DD CEN ISO/TS 25377:2007 Hydrometric uncertainty guide
07/30047031 DC : 0 ISO 18589 - MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - SOIL - PART 5: MEASUREMENT OF STRONTIUM 90
ISO 11057:2011 Air quality — Test method for filtration characterization of cleanable filter media
BS EN ISO 5667-16:2017 Water quality. Sampling Guidance on biotesting of samples
I.S. EN 61377:2016 RAILWAY APPLICATIONS - ROLLING STOCK - COMBINED TEST METHOD FOR TRACTION SYSTEMS
09/30205176 DC : 0 ISO/TS 25680 - MEDICAL LABORATORIES - CALCULATION AND EXPRESSION OF MEASUREMENT UNCERTAINTY
PD CEN/TS 16450:2013 Ambient air. Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
ASTM E 1026 : 2015 : REDLINE Standard Practice for Using the Fricke Dosimetry System
BS EN ISO 20349-2:2017 Personal protective equipment. Footwear protecting against risks in foundries and welding Requirements and test methods for protection against risks in welding and allied processes
BS ISO 19017 : 2015 COR 2017 GUIDANCE FOR GAMMA SPECTROMETRY MEASUREMENT OF RADIOACTIVE WASTE
DIN EN ISO 16187:2013-12 FOOTWEAR AND FOOTWEAR COMPONENTS - TEST METHOD TO ASSESS ANTIBACTERIAL ACTIVITY (ISO 16187:2013)
AGMA ISO 18653 : A GEARS - EVALUATION OF INSTRUMENTS FOR THE MEASUREMENT OF INDIVIDUAL GEARS
FM 1950 : 2016 SEISMIC SWAY BRACES FOR PIPE, TUBING AND CONDUIT
INCITS/ISO/IEC 27037 : 2014 INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - GUIDELINES FOR IDENTIFICATION, COLLECTION, ACQUISITION AND PRESERVATION OF DIGITAL EVIDENCE
04/30103157 DC : DRAFT MARCH 2004 BS EN 12094-8 - FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 8 - REQUIREMENTS AND TEST METHODS FOR FLEXIBLE CONNECTORS
CEI UNI EN 45545-1 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL
MIL-DTL-10911 Revision E:2012 LOUDSPEAKERS, PERMANENT MAGNET, (UNENCASED, 2.5-, 3-, 4-, 5-, 6-, 8-, 10-, AND 12-INCH DIAMETER CONES), GENERAL SPECIFICATION FOR
MIL-DTL-27267 Revision D:2012 Hose, Cres Wire Reinforced, Polytetrafluoroethylene, Four Hundred Fifty Degree Fahrenheit, Medium Pressure
17/30302773 DC : 0 BS ISO 13779-4 - IMPLANTS FOR SURGERY - HYDROXYAPATITE - PART 4: DETERMINATION OF COATING ADHESION STRENGTH
BS DD8489-1(2011) : 2011 FIXED FIRE PROTECTION SYSTEMS - INDUSTRIAL AND COMMERCIAL WATERMIST SYSTEMS - PART 1: CODE OF PRACTICE FOR DESIGN AND INSTALLATION
ISO 18566-2:2017 Building environment design — Design, test methods and control of hydronic radiant heating and cooling panel systems — Part 2: Determination of heating and cooling capacity of ceiling mounted radiant panels
UNI CEN/TS 1452-7 : 2014 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
ISO 14385-1:2014 Stationary source emissions Greenhouse gases Part 1: Calibration of automated measuring systems
BS EN 15440:2011 Solid recovered fuels. Methods for the determination of biomass content
BS ISO 22309:2011 Microbeam analysis. Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above
08/30161739 DC : DRAFT MAY 2008 BS EN ISO 11771 - AIR QUALITY - DETERMINATION OF TIME-AVERAGED MASS EMISSIONS AND EMISSION FACTORS - GENERAL APPROACH
BS EN ISO 10808:2010 Nanotechnologies. Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing
BS ISO/IEC 27041 : 2015 INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - GUIDANCE ON ASSURING SUITABILITY AND ADEQUACY OF INCIDENT INVESTIGATIVE METHOD
12/30256719 DC : 0 BS ISO/ASTM 51940 - GUIDE FOR DOSIMETRY FOR STERILE INSECTS RELEASE PROGRAMS
API SPEC 11D1 : 2015 PACKERS AND BRIDGE PLUGS
I.S. EN ISO 14692-2:2017 PETROLEUM AND NATURAL GAS INDUSTRIES - GLASS-REINFORCED PLASTICS (GRP) PIPING - PART 2: QUALIFICATION AND MANUFACTURE (ISO 14692-2:2017)
PREN 416 : DRAFT 2017 GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY
I.S. EN 725-4:2006 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC POWDERS - PART 4: DETERMINATION OF OXYGEN CONTENT IN ALUMINIUM NITRIDE BY XRF ANALYSIS
I.S. EN 16924:2017 FOODSTUFFS - DETERMINATION OF ZEARALENONE IN EDIBLE VEGETABLE OILS BY LC-FLD OR LC-MS/MS
CSA Z259.2.3 : 2016 DESCENT DEVICES
DD CEN/TS 843-9:2010 Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature Method of test for edge-chip resistance
I.S. EN ISO 10704:2015 WATER QUALITY - MEASUREMENT OF GROSS ALPHA AND GROSS BETA ACTIVITY IN NON-SALINE WATER - THIN SOURCE DEPOSIT METHOD (ISO 10704:2009)
12/30241400 DC : 0 BS EN 15654-1 - RAILWAY APPLICATIONS - MEASUREMENT OF WHEEL AND AXLE LOADS - PART 1: INTEROPERABLE &#39;IN-SERVICE&#39; RAIL VEHICLES
BIS IS 4169 : 2014 METALLIC MATERIALS - CALIBRATION OF FORCE PROVING INSTRUMENTS USED FOR THE VERIFICATION OF UNIAXIAL TESTING MACHINES
BS ISO 17162:2014 Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of monolithic ceramics at room temperature. Determination of compressive strength
BS EN 61400-4:2013 Wind turbines Design requirements for wind turbine gea
BS ISO 14594:2014 Microbeam analysis. Electron probe microanalysis. Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy
ISO 24095:2009 Workplace air Guidance for the measurement of respirable crystalline silica
S.R. CEN/TS 843-9:2010 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 9: METHOD OF TEST FOR EDGE-CHIP RESISTANCE
BS EN 16430-3:2014 Fan assisted radiators, convectors and trench convectors Test method and rating for cooling capacity
API SPEC 20E : 2017 ALLOY AND CARBON STEEL BOLTING FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRIES
DIN EN ISO 22975-2 E : 2017 SOLAR ENERGY - COLLECTOR COMPONENTS AND MATERIALS - PART 2: HEAT-PIPES FOR SOLAR THERMAL APPLICATION - DURABILITY AND PERFORMANCE (ISO 22975-2:2016)
PD CLC/TS 50640:2015 Clothes washing machines for commercial use. Methods for measuring the performance
TAPPI T 1211 : 2011 ACCEPTANCE PROCEDURES FOR LABORATORIES PROVIDING REFERENCE MATERIALS FOR TAPPI STANDARDS
IEC 60747-14-4:2011 Semiconductor devices - Discrete devices - Part 14-4: Semiconductor accelerometers
I.S. EN 16430-2:2014 FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 2: TEST METHOD AND RATING FOR THERMAL OUTPUT
16/30328759 DC : 0 BS EN 13814-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE
I.S. EN 115-1:2017 SAFETY OF ESCALATORS AND MOVING WALKS - PART 1: CONSTRUCTION AND INSTALLATION
S.R. CEN ISO/TS 22391-7:2011 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY (ISO/TS 22391-7:2011)
ECA ILAC G3 : 2012 GUIDELINES FOR TRAINING COURSES FOR ASSESSORS USED BY ACCREDITATION BODIES
12/30251292 DC BS ISO/ASTM 51261. Practice for calibration of routine dosimetry systems for radiation processing
UNE-EN ISO 11731:2017 Water quality - Enumeration of Legionella (ISO 11731:2017)
UNE-EN 16801:2016 Foodstuffs - Determination of elements and their chemical species - Determination of methylmercury in foodstuffs of marine origin by isotope dilution GC-ICP-MS
14/30260166 DC : 0 BS ISO/IEC 27041 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - GUIDANCE ON ASSURING SUITABILITY AND ADEQUACY OF INCIDENT INVESTIGATIVE METHODS
ISO 25597:2013 Stationary source emissions Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution
BS EN 62670-3:2017 Photovoltaic concentrators (CPV). Performance testing Performance measurements and power rating
I.S. EN ISO 21898:2005 PACKAGING - FLEXIBLE INTERMEDIATE BULK CONTAINERS (FIBCS) FOR NON-DANGEROUS GOODS
I.S. EN 13616-2:2016 OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - PART 2: OVERFILL PREVENTION DEVICES WITHOUT A CLOSURE DEVICE
PD CEN/TS 15634-4:2016 Foodstuffs. Detection of food allergens by molecular biological methods Peanut (Arachis hypogaea). Qualitative detection of a specific DNA sequence in chocolate by real-time PCR
14/30273514 DC : 0 BS ISO 18249 - NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION TESTING - TESTING OF FIBRE REINFORCED POLYMERS - SPECIFIC METHODOLOGY AND GENERAL EVALUATION CRITERIA
BS EN 14037-4:2016 Free hanging heating and cooling surfaces for water with a temperature below 120°C Pre-fabricated ceiling mounted radiant panels. Test method for cooling capacity
ISO 17974:2002 Surface chemical analysis High-resolution Auger electron spectrometers Calibration of energy scales for elemental and chemical-state analysis
S.R. CEN/TS 14972:2011 FIXED FIREFIGHTING SYSTEMS - WATERMIST SYSTEMS - DESIGN AND INSTALLATION
I.S. EN 50436-3:2016 ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 3: GUIDANCE FOR AUTHORITIES, DECISION MAKERS, PURCHASERS AND USERS
BS IEC 62705:2014 Nuclear power plants. Instrumentation and control important to safety. Radiation monitoring systems (RMS): Characteristics and lifecycle
DIN EN ISO 3266:2016-05 FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010 + AMD 1:2015)
PD IEC/TS 62129-3:2014 Calibration of wavelength/optical frequency measurement instruments Optical frequency meters using optical frequency combs
UNI CEI 70019 : 2008 CONFORMITY ASSESSMENT - ARRANGEMENTS FOR THE RECOGNITION AND ACCEPTANCE OF CONFORMITY ASSESSMENT RESULTS
ISO 13164-1:2013 Water quality — Radon-222 — Part 1: General principles
UNI CEN/TS 16115-1 : 2011 AMBIENT AIR QUALITY - MEASUREMENT OF BIOAEROSOLS - PART 1: DETERMINATION OF MOULDS USING FILTER SAMPLING SYSTEMS AND CULTURE-BASED ANALYSES
BS EN 1071-13:2010 Advanced technical ceramics. Methods of test for ceramic coatings Determination of wear rate by the pin-on-disk method
CSA PLUS 15189 : 2010 THE ISO 15189:2007 ESSENTIALS - A PRACTICAL HANDBOOK FOR IMPLEMENTING THE ISO 15189:2007 STANDARD FOR MEDICAL LABORATORIES
06/30155009 DC : 0 EN 50492 - BASIC STANDARD FOR THE IN-SITU MEASUREMENT OF ELECTROMAGNETIC FIELD STRENGTH RELATED TO HUMAN EXPOSURE IN THE VICINITY OF BASE STATIONS
I.S. EN 16101:2012 WATER QUALITY - GUIDANCE STANDARD ON INTERLABORATORY COMPARISON STUDIES FOR ECOLOGICAL ASSESSMENT
DIN EN 1071-13:2010-07 Advanced technical ceramics - Methods of test for ceramic coatings - Part 13: Determination of wear rate by the pin-on-disk method
BS ISO 17089-1:2019 Measurement of fluid flow in closed conduits. Ultrasonic meters for gas Meters for custody transfer and allocation measurement
BS ISO 22968:2010 Forced draught oil burners
NF EN ISO 16495 : 2013 PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - TEST METHODS
17/30335786 DC : 0 BS ISO 19867-1 - CLEAN COOKSTOVES AND CLEAN COOKING SOLUTIONS - HARMONIZED LABORATORY TEST PROTOCOLS - PART 1: STANDARD TEST SEQUENCE FOR EMISSIONS AND PERFORMANCE, SAFETY AND DURABILITY
DIN EN 16623:2015-04 PAINTS AND VARNISHES - REACTIVE COATINGS FOR FIRE PROTECTION OF METALLIC SUBSTRATES - DEFINITIONS, REQUIREMENTS, CHARACTERISTICS AND MARKING
BS EN ISO 16641:2016 Measurement of radioactivity in the environment. Air. Radon 220: Integrated measurement methods for the determination of the average activity concentration using passive solid-state nuclear track detectors
15/30295395 DC : 0 BS EN 12082 - RAILWAY APPLICATIONS - AXLEBOXES - PERFORMANCE TESTING
DIN EN 843-6:2009-12 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 6: Guidance for fractographic investigation
13/30267625 DC : 0 BS EN 61481-2 ED 1.0 - LIVE WORKING - PHASE COMPARATORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES FROM 1 KV TO 36 KV A.C
09/30125465 DC : 0 BS ISO 8769 - REFERENCE SOURCES - CALIBRATION OF SURFACE CONTAMINATION MONITORS - ALPHA-, BETA- AND PHOTON EMITTERS
PLUS 9001 (5th ed. pub. 2017) The ISO 9000 essentials: A practical handbook for implementing the ISO 9000 family of standards
15/30326124 DC : 0 BS EN 15654-1 - RAILWAY APPLICATIONS - MEASUREMENT OF VERTICAL FORCES ON WHEELS AND WHEELSETS - PART 1: INTEROPERABLE ON-TRACK MEASUREMENT SITES FOR VEHICLES IN SERVICE
11/30252162 DC : 0 BS EN 62209-1 - HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM HAND-HELD AND BODY-MOUNTED WIRELESS COMMUNICATION DEVICES HUMAN MODELS, INSTRUMENTATION, AND PROCEDURES - PART 1: PROCEDURE TO DETERMINE THE SPECIFIC ABSORPTION RATE (SAR)FOR DEVICES USED NEXT TO THE EAR (FREQUENCY RANGE OF 300 MHZ TO 6 GHZ)
I.S. EN 14907:2005 AMBIENT AIR QUALITY - STANDARD GRAVIMETRIC MEASUREMENT METHOD FOR THE DETERMINATION OF THE PM[2,5] MASS FRACTION OF SUSPENDED PARTICULATE MATTER
12/30259670 DC : 0 BS ISO/IEC GUIDE 98-4.2 - UNCERTAINTY OF MEASUREMENT - PART 4: ROLE OF MEASUREMENT UNCERTAINTY IN CONFORMITY ASSESSMENT
BS EN ISO 17201-1:2005 Acoustics. Noise from shooting ranges Determination of muzzle blast by measurement
I.S. EN 725-8:2006 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC POWDERS - PART 8: DETERMINATION OF TAPPED BULK DENSITY
06/30112308 DC : 0 EN ISO 13530 - WATER QUALITY - GUIDANCE ON ANALYTICAL QUALITY CONTROL FOR CHEMICAL AND PHYSICOCHEMICAL WATER ANALYSIS
14/30303365 DC : 0 BS ISO/ASTM 51649 - PRACTICE FOR DOSIMETRY IN AN ELECTRON BEAM FACILITY FOR RADIATION PROCESSING AT ENERGIES BETWEEN 300 KEV AND 25 MEV
I.S. EN 843-5:2006 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 5: STATISTICAL ANALYSIS
DIN EN 15461 E : 2011 RAILWAY APPLICATIONS - NOISE EMISSION - CHARACTERISATION OF THE DYNAMIC PROPERTIES OF TRACK SECTIONS FOR PASS BY NOISE MEASUREMENTS
I.S. EN 1071-4:2006 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 4: DETERMINATION OF CHEMICAL COMPOSITION BY ELECTRON PROBE MICROANALYSIS (EPMA)
05/30133451 DC : 0 EN 115 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF ESCALATORS AND MOVING WALKS
AAMI/ISO TIR15499:2017 BIOLOGICAL EVALUATION OF MEDICAL DEVICES - GUIDANCE ON THE CONDUCT OF BIOLOGICAL EVALUATION WITHIN A RISK MANAGEMENT PROCESS
12/30248232 DC : DRAFT AUG 2012 BS EN 61400-2 - WIND TURBINES - PART 2: SMALL WIND TURBINES
05/30134607 DC : DRAFT JUNE 2005 ISO 22110 - MILK AND MILK PRODUCTS - SAMPLING - INSPECTION BY VARIABLES IN THE PRESENCE OF MEASUREMENT ERROR
BS IEC 63004:2015 Standard for receiver fixture interface
PD ISO/TR 13014:2012 Nanotechnologies. Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment
UNE-EN 16857:2018 Foodstuffs - Determination of benzene in soft drinks, other beverages and vegetable-based infant foods by headspace gas chromatography mass spectrometry (HS-GC-MS)
SAE AS 9133 : 2016 QUALIFICATION PROCEDURE FOR AEROSPACE STANDARD PRODUCTS
BS ISO 13164-2:2013 Water quality. Radon-222 Test method using gamma-ray spectrometry
SAE AMS 3095 : 2004 PAINT: HIGH GLOSS FOR AIRLINE EXTERIOR SYSTEM
17/30356677 DC : 0 BS ISO/ASTM 51538 - PRACTICE FOR USE OF THE ETHANOL-CHLOROBENZENE DOSIMETRY SYSTEM
09/30213551 DC : 0 BS EN 60567 - OIL-FILLED ELECTRICAL EQUIPMENT - SAMPLING OF GASES AND OF OIL FOR ANALYSIS OF FREE AND DISSOLVED GASES - GUIDANCE
DIN EN 15856 E : 2010 NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION - GENERAL PRINCIPLES OF AE TESTING FOR THE DETECTION OF CORROSION WITHIN METALLIC SURROUNDING FILLED WITH LIQUID
ASTM F 3287 : 2017 Standard Test Method for Nondestructive Detection of Leaks in Packages by Mass Extraction Method
BS EN 61829:2016 Photovoltaic (PV) array. On-site measurement of current-voltage characteristics
16/30346829 DC : 0 BS ISO 16038 - MALE CONDOMS - GUIDANCE ON THE USE OF ISO 4074 AND ISO 23409 IN THE QUALITY MANAGEMENT CONDOMS
I.S. EN 16523-1:2015 DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 1: PERMEATION BY LIQUID CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT
15/30282559 DC : 0 BS EN ISO 11137-3 - STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL
UNE-EN 62788-1-6:2017 Measurement procedures for materials used in photovoltaic modules - Part 1-6: Encapsulants - Test methods for determining the degree of cure in Ethylene-Vinyl Acetate
16/30344112 DC : 0 BS ISO/ASTM 51939 - PRACTICE FOR BLOOD IRRADIATION DOSIMETRY
PD IEC/PAS 63083:2017 Specific absorption rate (SAR) measurement procedure for long term evolution (LTE) devices
13/30277457 DC : 0 BS EN 1776 - GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS
DIN ISO 13067 E : 2015 MICROBEAM ANALYSIS - ELECTRON BACKSCATTER DIFFRACTION - MEASUREMENT OF AVERAGE GRAIN SIZE (ISO 13067:2011)
ISO 20187:2016 Inflatable play equipment — Safety requirements and test methods
I.S. EN 843-2:2006 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 2: DETERMINATION OF YOUNG&#39;S MODULUS, SHEAR MODULUS AND POISSON&#39;S RATIO
BS EN ISO 20349:2010 Personal protective equipment. Footwear protecting against thermal risks and molten metal splashes as found in foundries and welding. Requirements and test method
12/30237514 DC : 0 BS ISO 13528 - STATISTICAL METHODS FOR USE IN PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS
BS ISO 18566-2:2017 Building environment design. Design, test methods and control of hydronic radiant heating and cooling panel systems Determination of heating and cooling capacity of ceiling mounted radiant panels
BS ISO 11665-6 : 2012 MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR: RADON-222 - PART 6: SPOT MEASUREMENT METHOD OF THE ACTIVITY CONCENTRATION
DIN EN ISO 13162:2015-11 Water quality - Determination of carbon 14 activity - Liquid scintillation counting method (ISO 13162:2011)
BS EN 15549:2008 Air quality. Standard method for the measurement of the concentration of benzo(a)pyrene in ambient air
ANSI CGATS/ISO 15790 : 2005(R2007) GRAPHIC TECHNOLOGY AND PHOTOGRAPHY - CERTIFIED REFERENCE MATERIALS FOR REFLECTION AND TRANSMISSION METROLOGY - DOCUMENTATION AND PROCEDURES FOR USE, INCLUDING DETERMINATION OF COMBINED STANDARD UNCERTAINTY
NFPA 1936 : 2015 POWERED RESCUE TOOLS
I.S. EN 1007-6:2007 ADVANCED TECHNICAL CERAMIC - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 6: DETERMINATION OF TENSILE PROPERTIES OF FILAMENTS AT HIGH TEMPERATURE
UNI EN 16447 : 2014 EXPLOSION ISOLATION FLAP VALVES
ISO 16392:2017 Tyres — Electrical resistance — Test method for measuring electrical resistance of tyres on a test rig
PD CEN/TS 1401-2:2012 Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for assessment of conformity
BS EN ISO 26423:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of coating thickness by crater-grinding method
MIL-DTL-5513 Revision D:2012 SWIVEL JOINT, HYDRAULIC
11/30218121 DC : 0 BS EN 15085-1:2007/A1 - RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 1: GENERAL
MIL-DTL-32435 Base Document:2013 Hose, Polytetrafluoroethylene, Convoluted, 450 Degrees F, Medium Pressure
PREN 1048 : DRAFT 2012 HEAT EXCHANGERS - AIR COOLED LIQUID COOLERS ('DRY COOLERS') - TEST PROCEDURES FOR ESTABLISHING PERFORMANCE
PREN 14382 : DRAFT 2016 GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURE UP TO 100 BAR
UNI EN ISO 13628-15 : 2011 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS
I.S. EN 62311:2008 ASSESSMENT OF ELECTRONIC AND ELECTRICAL EQUIPMENT RELATED TO HUMAN EXPOSURE RESTRICTIONS FOR ELECTROMAGNETIC FIELDS (0 HZ - 300 GHZ)
DIN ISO 16000-3 E : 2013 INDOOR AIR - PART 3: DETERMINATION OF FORMALDEHYDE AND OTHER CARBONYL COMPOUNDS IN INDOOR AIR AND TEST CHAMBER AIR
06/19977151 DC : DRAFT JUN 2006 BS ISO 13779-3 - IMPLANTS FOR SURGERY - HYDROXYAPATITE - PART 3: CHEMICAL ANALYSIS AND CHARACTERIZATION OF CRYSTALLINITY AND PHASE PURITY
11/30237918 DC : 0 BS EN ISO 13274 - PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING FOR PACKAGING AND IBCS
PD CEN/TR 17105:2017 Construction products. Assessment of release of dangerous substances. Guidance on the use of ecotoxicity tests applied to construction products
PD CEN/TS 13598-3:2012 Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride)(PVC-U), polypropylene (PP) and polyethylene (PE) Guidance for assessment of conformity
12/30267131 DC : 0 BS EN 16447 - EXPLOSION ISOLATION FLAP VALVES
NF ISO 22309 : 2012 MICROBEAM ANALYSIS - QUANTITATIVE ANALYSIS USING ENERGY-DISPERSIVE SPECTROMETRY (EDS) FOR ELEMENTS WITH AN ATOMIC NUMBER OF 11 (NA) OR ABOVE
BS EN 16242:2012 Conservation of cultural heritage. Procedures and instruments for measuring humidity in the air and moisture exchanges between air and cultural property
11/30204994 DC : DRAFT AUG 2011 BS ISO 13383-2 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MICROSTRUCTURAL CHARACTERIZATION - PART 2: DETERMINATION OF PHASE VOLUME FRACTION BY EVALUATION OF MICROGRAPHS
BS EN 13763-4:2003 Explosives for civil uses. Detonators and relays Determination of resistance to abrasion of leading wires and shock tubes
17/30331584 DC : 0 BS ISO 2715 - LIQUID HYDROCARBONS - VOLUMETRIC MEASUREMENT BY TURBINE FLOWMETER
DIN EN 15859 E : 2010 AIR QUALITY - CERTIFICATION OF AUTOMATED DUST ARRESTMENT PLANT MONITORS FOR USE ON STATIONARY SOURCES - PERFORMANCE CRITERIA AND TEST PROCEDURES
BS EN 62321-8:2017 Determination of certain substances in electrotechnical products Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption accessory (Py/TD-GC-MS)
PD ISO/TR 22305:2008 Cigarettes. Measurement of nicotinefree dry particulate matter, nicotine, water and carbon monoxide in cigarette smoke. Analysis of data from collaborative studies reporting relationships between repeatability, reproducibility and tolerances
11/30217708 DC : 0 BS ISO 14628 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR ROLLING CONTACT FATIGUE OF SILICON NITRIDE CERAMICS AT ROOM TEMPERATURE BY BALLS-ON-FLAT METHOD
BS ISO 8196-3:2009 Milk. Definition and evaluation of the overall accuracy of alternative methods of milk analysis Protocol for the evaluation and validation of alternative quantitative methods of milk analysis
16/30341731 DC : 0 BS EN 12014-2 - FOODSTUFFS - DETERMINATION OF NITRATE AND/OR NITRITE CONTENT - PART 2: HPLC/IC METHOD FOR THE DETERMINATION OF NITRATE CONTENT OF VEGETABLES AND VEGETABLE PRODUCTS
12/30230597 DC : 0 BS ISO 25597 - STATIONARY SOURCE EMISSIONS - TEST METHOD FOR DETERMINING PM2,5 AND PM10 MASS IN STACK GASES USING CYCLONE SAMPLERS AND SAMPLE DILUTION
DIN CEN/TS 15634-3;DIN SPEC 10701-2:2016-08 FOODSTUFFS - DETECTION OF FOOD ALLERGENS BY MOLECULAR BIOLOGICAL METHODS - PART 3: HAZELNUT (CORYLUS AVELLANA) - QUALITATIVE DETECTION OF A SPECIFIC DNA SEQUENCE IN CHOCOLATE BY REAL-TIME PCR
16/30338099 DC : 0 BS EN 304 - HEATING BOILERS - TEST CODE FOR HEATING BOILERS FOR ATOMIZING OIL BURNERS
ISO 7503-1:2016 Measurement of radioactivity Measurement and evaluation of surface contamination Part 1: General principles
ASTM E 3111/E3111M : 2018 Standard Test Method for Ballistic Resistant Head Protection
S.R. CWA 16649:2013 MANAGING EMERGING TECHNOLOGY-RELATED RISKS
09/30179503 DC : DRAFT FEB 2009 BS ISO 29301 - MICROBEAM ANALYSIS - ANALYTICAL TRANSMISSION ELECTRON MICROSCOPY - METHODS FOR CALIBRATING IMAGE MAGNIFICATION BY USING REFERENCE MATERIALS GIVING A PERIODIC DIFFRACTION PATTERN
12/30258970 DC : 0 BS ISO 5667-6 - WATER QUALITY - SAMPLING - PART 6: GUIDANCE ON SAMPLING OF RIVERS AND STREAMS
UNI EN 15842 : 2010 FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS
16/30301971 DC : 0 BS ISO 1438 - HYDROMETRY - OPEN CHANNEL FLOW MEASUREMENT USING THIN-PLATE WEIRS
13/30286383 DC : 0 BS ISO 18589-3 - MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - SOIL - PART 3: MEASUREMENT OF GAMMA-EMITTING RADIONUCLIDES
BS EN 60904-4:2009 Photovoltaic devices Reference solar devices. Procedures for establishing calibration traceability
DIN EN ISO 16187 E : 2013 FOOTWEAR AND FOOTWEAR COMPONENTS - TEST METHOD TO ASSESS ANTIBACTERIAL ACTIVITY (ISO 16187:2013)
OIML D 27 : 2001 INITIAL VERIFICATION OF MEASURING INSTRUMENTS UTILIZING THE MANUFACTURER'S QUALITY MANAGEMENT SYSTEM
DIN EN 15267-4:2015-08 (Draft) AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 4: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR PERIODIC MEASUREMENTS OF EMISSIONS FROM STATIONARY SOURCES
PREN 17175 : DRAFT 2017 GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY
DIN EN 16583:2015-10 Heat exchangers - Hydronic room fan coils units - Determination of the sound power level
07/30122906 DC : 0 BS IEC 61577-4 - RADIATION PROTECTION INSTRUMENTATION - RADON AND RADON DECAY PRODUCT MEASURING INSTRUMENTS - PART 4: EQUIPMENT FOR THE PRODUCTION OF REFERENCE ATMOSPHERES CONTAINING RADON ISOTOPES AND THEIR DECAY PRODUCTS (STAR)
MIL-STD-705 Revision D:2016 MOBILE ELECTRIC POWER SYSTEMS
BS EN ISO 13383-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Microstructural characterization Determination of grain size and size distribution
15/30323246 DC : 0 BS EN ISO 10077-2 - THERMAL PERFORMANCE OF WINDOWS, DOORS AND SHUTTERS - CALCULATION OF THERMAL TRANSMITTANCE - PART 2: NUMERICAL METHOD FOR FRAMES
BS ISO/IEC 19795-5:2011 Information technology. Biometric performance testing and reporting Access control scenario and grading scheme
08/30168345 DC : DRAFT JULY 2008 BS ISO 15136-1 - DOWNHOLE EQUIPMENT FOR PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS
DIN EN 45545-1:2013-08 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL
09/30187984 DC : 0 BS EN ISO 10808 - NANOTECHNOLOGIES - CHARACTERIZATION OF NANOPARTICLES IN INHALATION EXPOSURE CHAMBERS FOR INHALATION TOXICITY TESTING - COMPLEMENTARY ELEMENT
DIN ISO 3567:2015-05 VACUUM GAUGES - CALIBRATION BY DIRECT COMPARISON WITH A REFERENCE GAUGE (ISO 3567:2011)
PD ISO/TS 19858:2015 Forestry machines. Portable chainsaws. Test method for evaluating saw chain oil lubricity
PREN 1568-1 : DRAFT 2016 FIRE EXTINGUISHING MEDIA - FOAM CONCENTRATES - PART 1: SPECIFICATION FOR MEDIUM EXPANSION FOAM CONCENTRATES FOR SURFACE APPLICATION TO WATER-IMMISCIBLE LIQUIDS
DIN EN 16583 E : 2015 HEAT EXCHANGERS - HYDRONIC ROOM FAN COILS UNITS - DETERMINATION OF THE SOUND POWER LEVEL
EN ISO 5667-16:2017 Water quality - Sampling - Part 16: Guidance on biotesting of samples (ISO 5667-16:2017)
04/30122725 DC : DRAFT OCT 2004 ISO TS 3567 - VACUUM TECHNOLOGY - VACUUM GAUGES - CALIBRATION BY DIRECT COMPARISON WITH A REFERENCE GAUGE - GENERAL SET-UP AND PROCEDURE
PD ISO/TS 12812-2:2017 Core banking. Mobile financial services Security and data protection for mobile financial services
DIN EN 15856:2010-05 Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid
BS ISO 14624-3:2005 Space systems. Safety and compatibility of materials Determination of offgassed products from materials and assembled articles
I.S. EN ISO 20349-1:2017&LC:2018 PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR PROTECTING AGAINST RISKS IN FOUNDRIES AND WELDING - PART 1: REQUIREMENTS AND TEST METHODS FOR PROTECTION AGAINST RISKS IN FOUNDRIES (ISO 20349-1:2017)
CEI EN 60904-5 : 2011 PHOTOVOLTAIC DEVICES - PART 5: DETERMINATION OF THE EQUIVALENT CELL TEMPERATURE (ECT) OF PHOTOVOLTAIC (PV) DEVICES BY THE OPEN-CIRCUIT VOLTAGE METHOD
PREN 1176-1 : DRAFT 2014 PLAYGROUND EQUIPMENT AND SURFACING - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN ISO 18589-2:2017 MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - SOIL - PART 2: GUIDANCE FOR THE SELECTION OF THE SAMPLING STRATEGY, SAMPLING AND PRE-TREATMENT OF SAMPLES (ISO 18589-2:2015)
DIN EN ISO 5167-5 E : 2016 MEASUREMENT OF FLUID FLOW BY MEANS OF PRESSURE DIFFERENTIAL DEVICES INSERTED IN CIRCULAR CROSS-SECTION CONDUITS RUNNING FULL - PART 5: CONE METERS (ISO 5167-5:2016)
BS EN ISO 9241-307:2008 Ergonomics of human-system interaction Analysis and compliance test methods for electronic visual displays
ISO 24637:2009 Space systems Electromagnetic interference (EMI) test reporting requirements
UNI EN 16457 : 2014 CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT
BS EN 16623:2015 Paints and varnishes. Reactive coatings for fire protection of metallic substrates. Definitions, requirements, characteristics and marking
DIN ISO 16000-4:2012-11 INDOOR AIR - PART 4: DETERMINATION OF FORMALDEHYDE - DIFFUSIVE SAMPLING METHOD (ISO 16000-4:2011)
BS ISO 14385-2:2014 Stationary source emissions. Greenhouse gases Ongoing quality control of automated measuring systems
BS ISO 19361:2017 Measurement of radioactivity. Determination of beta emitters activities. Test method using liquid scintillation counting
BS ISO 18610:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure. Determination of elastic properties by ultrasonic technique
DIN EN 15309 E : 2007 CHARACTERIZATION OF WASTE AND SOIL - DETERMINATION OF ELEMENTAL COMPOSITION BY X-RAY FLUORESCENCE
DD CEN/TS 16115-1:2011 Ambient air quality. Measurement of bioaerosols Determination of moulds using filter sampling systems and culture-based analyses
BS ISO 27893:2011 Vacuum technology. Vacuum gauges. Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
08/30188055 DC : DRAFT AUG 2008 BS EN 60904-4 - PHOTOVOLTAIC DEVICES - PART 4: PROCEDURE FOR ESTABLISHING THE TRACEABILITY OF THE CALIBRATION OF REFERENCE SOLAR DEVICES
09/30208476 DC : 0 BS EN 843-8 - ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 8: GUIDELINES FOR CONDUCTING PROOF TESTS
NF EN 62321 : 2009 ELECTROTECHNICAL PRODUCTS - DETERMINATION OF LEVELS OF SIX REGULATED SUBSTANCES (LEAD, MERCURY, CADMIUM, HEXAVALENT CHROMIUM, POLYBROMINATED BIPHENYLS, POLYBROMINATED DIPHENYL ETHERS)
MIL-DTL-16878 Revision H:2012 WIRE, ELECTRICAL, INSULATED, GENERAL SPECIFICATION FOR
BS EN 61577-4:2014 Radiation protection instrumentation. Radon and radon decay product measuring instruments Equipment for the production of reference atmospheres containing radon isotopes and their decay products (STAR)
DIN CEN/TS 15634-4;DIN SPEC 10701-3:2016-08 Foodstuffs - Detection of food allergens by molecular biological methods - Part 4: Peanut (Arachis hypogaea) - Qualitative detection of a specific DNA sequence in chocolate by real-time PCR; German version CEN/TS 15634-4:2016
MIL-DTL-83296 Revision B:2009 Fittings, Corrosion Resistant Steel, High Temperature, High Pressure (3000 PSI), Hydraulic and Pneumatic, General Specification for
BS EN ISO/IEC 17040:2005 Conformity assessment. General requirements for peer assessment of conformity assessment bodies and accreditation bodies
DIN EN 15857:2010-05 Non-destructive testing - Acoustic emission - Testing of fibre-reinforced polymers - Specific methodology and general evaluation criteria
ASTM E 1815 : 2008 Standard Test Method for Classification of Film Systems for Industrial Radiography
05/30133231 DC : DRAFT MAY 2005 IEC 60904-1 ED 2 - PHOTOVOLTAIC DEVICES - PART 1: MEASUREMENT OF PHOTOVOLTAIC CURRENT-VOLTAGE CHARACTERISTICS
BS ISO 10840:2008 Plastics. Guidance for the use of standard fire tests
11/30229715 DC : 0 BS EN ISO/IEC 17020 - CONFORMITY ASSESSMENT - GENERAL CRITERIA FOR THE OPERATION OF VARIOUS TYPES OF BODIES PERFORMING INSPECTION
04/30118971 DC : DRAFT DEC 2004 ISO 20553 - RADIATION PROTECTION - MONITORING OF WORKERS OCCUPATIONALLY EXPOSED TO A RISK OF INTERNAL CONTAMINATION WITH RADIOACTIVE MATERIAL
12/30260963 DC : 0 BS EN 12341 - AMBIENT AIR - STANDARD GRAVIMETRIC MEASUREMENT METHOD FOR THE DETERMINATION OF THE PM 10 OR PM 2,5 MASS CONCENTRATION OF SUSPENDED PARTICULATE MATTER
PD ISO/TS 21569-3:2015 Horizontal methods for molecular biomarker analysis. Methods of analysis for the detection of genetically modified organisms and derived products Construct-specific real-time PCR method for detection of P35S-pat-sequence for screening genetically modified organisms
02/700238 DC : DRAFT FEB 2002 ISO/CD 21187 - MILK - QUANTITATIVE DETERMINATION OF BACTERIOLOGICAL QUALITY - PROTOCOL FOR ESTABLISHING A CONVERSION RELATIONSHIP BETWEEN ROUTINE METHOD RESULTS AND ANCHOR METHOD RESULTS AND ITS VERIFICATION
I.S. EN ISO 5840-3:2013 CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 3: HEART VALVE SUBSTITUTES IMPLANTED BY TRANSCATHETER TECHNIQUES (ISO 5840-3:2013)
17/30344601 DC : 0 BS EN ISO 10993-1 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS
15/30290691 DC : 0 BS ISO 19204 - SOIL QUALITY - PROCEDURE FOR SITE-SPECIFIC ECOLOGICAL RISK ASSESSMENT OF SOIL CONTAMINATION (TRIAD APPROACH)
14/30281560 DC : 0 BS EN ISO 5840-2 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 2: SURGICALLY IMPLANTED HEART VALVE SUBSTITUTES
03/316232 DC : DRAFT OCT 2003
ASTM E 2053 : 2000 Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Metals, Ores, and Related Materials (Withdrawn 2006)
04/30112636 DC : DRAFT JUL 2004 EN 584-1 - NON-DESTRUCTIVE TESTING. INDUSTRIAL RADIOGRAPHIC FILM - PART 1: CLASSIFICATION OF FILM SYSTEMS FOR INDUSTRIAL RADIOGRAPHY
BS EN ISO 13162:2015 Water quality. Determination of carbon 14 activity. Liquid scintillation counting method
ASCE 25 06 : 2008 EARTHQUAKE ACTUATED AUTOMATIC GAS SHUTOFF DEVICES
14/30283703 DC : 0 BS ISO 8769 - REFERENCE SOURCES - CALIBRATION OF SURFACE CONTAMINATION MONITORS - ALPHA-, BETA- AND PHOTON EMITTERS
PD CLC/TS 50625-3-4:2017 Collection, logistics & treatment requirements for WEEE Specification for de-pollution. Temperature exchange equipment
12/30244420 DC : 0 BS ISO 13304 - RADIOLOGICAL PROTECTION - MINIMUM CRITERIA FOR ELECTRON PARAMAGNETIC RESONANCE (EPR) SPECTROSCOPY FOR RETROSPECTIVE DOSIMETRY OF IONIZING RADIATION
MIL-DTL-83298 Revision C:2009 Hose, Conductive Polytetrafluoroethylene Tube, High Temperature, High Pressure (3000 PSI), Hydraulicand Pneumatic
BS EN ISO 11665-5:2015 Measurement of radioactivity in the environment. Air:radon-222 Continuous measurement method of the activity concentration
I.S. EN 334:2005 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
03/300862 DC : DRAFT JAN 2003 ISO/ASTM 51400 - PRACTICE FOR CHARACTERIZATION AND PERFORMANCE OF A HIGH-DOSE RADIATION DOSIMETRY CALIBRATION LABORATORY
BS EN 16647:2015 Fireplaces for liquid fuels. Decorative appliances producing a flame using alcohol based or gelatinous fuel. Use in private households
DIN EN 16801:2016-07 FOODSTUFFS - DETERMINATION OF ELEMENTS AND THEIR CHEMICAL SPECIES - DETERMINATION OF METHYLMERCURY IN FOODSTUFFS OF MARINE ORIGIN BY ISOTOPE DILUTION GC-ICP-MS
SAE AMS P 21600 : 2013 PAINT SYSTEM, FLUORESCENT, REMOVABLE, FOR AIRCRAFT APPLICATION
PD CEN/TR 15367-3:2009 Petroleum products. Guide for good housekeeping Prevention of cross contamination
ASTM D 446 : 2012 Standard Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers
BS EN 62716:2013 Photovoltaic (PV) modules. Ammonia corrosion testing
14/30250844 DC : 0 BS EN ISO 6142-1 - GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES - PART 1: GRAVIMETRIC METHOD FOR CLASS 1 MIXTURES
ISO 13491-1:2016 Financial services Secure cryptographic devices (retail) Part 1: Concepts, requirements and evaluation methods
03/315968 DC : DRAFT SEP 2003 BS ISO 20079 - WATER QUALITY - DETERMINATION OF TOXIC EFFECT OF WATER CONSTITUENTS AND WASTE WATER TO DUCKWEED (LEMNA MINOR) - DUCKWEED GROWTH INHIBITION TEST
01/208272 DC : DRAFT NOV 2001 EN 50CCC-1 - GENERIC STANDARD TO DEMONSTRATE THE COMPLIANCE OF ELECTRONIC AND ELECTRICAL APPARATUS WITH THE BASIC RESTRICTIONS RELATED TO HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS (0 HZ - 300 GHZ)
BS ISO 13179-1:2014 Implants for surgery. Plasma-sprayed unalloyed titanium coatings on metallic surgical implants General requirements
04/19976241 DC : DRAFT AUG 2004
15/30295265 DC : 0 BS EN 13204 - DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS
DIN ISO 22309 E : 2015 MICROBEAM ANALYSIS - QUANTITATIVE ANALYSIS USING ENERGY-DISPERSIVE SPECTROMETRY (EDS) FOR ELEMENTS WITH AN ATOMIC NUMBER OF 11 (NA) OR ABOVE (ISO 22309:2011)
DD CEN/TS 15234:2006 Solid biofuels. Fuel quality assurance
12/30238553 DC : 0 BS EN ISO 11140-1 - STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS
ISO 18189:2016 Ophthalmic optics Contact lenses and contact lens care products Cytotoxicity testing of contact lenses in combination with lens care solution to evaluate lens/solution interactions
NF ISO 10704 : 2010 WATER QUALITY - MEASUREMENT OF GROSS ALPHA AND GROSS BETA ACTIVITY IN NON-SALINE WATER - THIN SOURCE DEPOSIT METHOD
DIN EN 15440:2011-05 Solid recovered fuels - Methods for the determination of biomass content
13/30290722 DC : 0 BS EN ISO 19901-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 5: WEIGHT CONTROL DURING ENGINEERING AND CONSTRUCTION
12/30212262 DC : 0 BS ISO 14629 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF FLOWABILITY OF CERAMIC POWDERS
BS ISO 8729-2:2009 Ships and marine technology. Marine radar reflectors Active type
BS EN ISO 13628-15:2011 Petroleum and natural gas industries. Design and operation of subsea production systems Subsea structures and manifolds
PD CEN/TS 1451-2:2012 Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP) Guidance for the assessment of conformity
BS ISO 24173:2009 Microbeam analysis. Guidelines for orientation measurement using electron backscatter diffraction
SAE AS 6171/7 : 2016 TECHNIQUES FOR SUSPECT/COUNTERFEIT EEE PARTS DETECTION BY ELECTRICAL TEST METHODS
BS EN ISO 8534:2017 Animal and vegetable fats and oils. Determination of water content. Karl Fischer method (pyridine free)
EN 1630:2011+A1:2015 PEDESTRIAN DOORSETS, WINDOWS, CURTAIN WALLING, GRILLES AND SHUTTERS - BURGLAR RESISTANCE - TEST METHOD FOR THE DETERMINATION OF RESISTANCE TO MANUAL BURGLARY ATTEMPTS
MIL-STD-1904 Revision B:2016 Test Standards for Level A and Level B Packaging for Conventional Ammunition
DIN EN 16440-1:2015-05 TESTING METHODOLOGIES OF REFRIGERATING DEVICES FOR INSULATED MEANS OF TRANSPORT - PART 1: MECHANICAL COOLING DEVICE WITH FORCED AIR CIRCULATION EVAPORATOR WITH OR WITHOUT HEATING DEVICE
CSA Z14161 : 2011 : R2015 STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS
BS ISO 2715:2017 Liquid hydrocarbons. Volumetric measurement by turbine flowmeter Volumetric measurement by turbine meter systems
10/30219009 DC : 0 BS EN 15234-1 - SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 1: GENERAL REQUIREMENTS
BS EN 60904-10:2010 Photovoltaic devices Methods of linearity measurement
17/30313373 DC : 0 BS ISO 21809-11 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 11: COATING REPAIRS ON REHABILITATION
PD CEN/TS 15634-5:2016 Foodstuffs. Detection of food allergens by molecular biological methods Mustard (Sinapis alba) and soya (Glycine max). Qualitative detection of a specific DNA sequence in cooked sausages by real-time PCR
DIN EN ISO 6142-1:2015-12 GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES - PART 1: GRAVIMETRIC METHOD FOR CLASS I MIXTURES (ISO 6142-1:2015)
BS EN 62129-2:2011 Calibration of wavelength/optical frequency measurement instruments Michelson interferometer single wavelength meters
BS ISO 18591:2015 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of compressive strength of ceramic granules
PD ISO/IEC TR 19795-3:2007 Information technology. Biometric performance testing and reporting Modality-specific testing
11/30212232 DC : DRAFT AUG 2011 BS ISO 13383-1 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MICROSTRUCTURAL CHARACTERIZATION - PART 1: DETERMINATION OF GRAIN SIZE AND SIZE DISTRIBUTION
NF EN 50383 : 2010 BASIC STANDARD FOR THE CALCULATION AND MEASUREMENT OF ELECTROMAGNETIC FIELD STRENGTH AND SAR RELATED TO HUMAN EXPOSURE FROM RADIO BASE STATIONS AND FIXED TERMINAL STATIONS FOR WIRELESS TELECOMMUNICATION SYSTEMS (110 MHZ - 40 GHZ)
17/30366325 DC : 0 BS EN ISO 3104 - PETROLEUM PRODUCTS - TRANSPARENT AND OPAQUE LIQUIDS - DETERMINATION OF KINEMATIC VISCOSITY AND CALCULATION OF DYNAMIC VISCOSITY
BS ISO 16592:2012 Microbeam analysis. Electron probe microanalysis. Guidelines for determining the carbon content of steels using a calibration curve method
DD CEN ISO/TS 22117:2010 Microbiology of food and animal feeding stuffs. Specific requirements and guidance for proficiency testing by interlaboratory comparison
BS EN 16020:2011 Explosion diverters
UNI EN ISO 10801 : 2011 NANOTECHNOLOGIES - GENERATION OF METAL NANOPARTICLES FOR INHALATION TOXICITY TESTING USING THE EVAPORATION/CONDENSATION METHOD
14/30298856 DC : 0 BS EN 9133 - AEROSPACE SERIES - QUALIFICATION PROCEDURE FOR AEROSPACE STANDARD PRODUCTS
NF ISO 8196-3 : 2009 MILK - DEFINITION AND EVALUATION OF THE OVERALL ACCURACY OF ALTERNATIVE METHODS OF MILK ANALYSIS - PART 3: PROTOCOL FOR THE EVALUATION AND VALIDATION OF ALTERNATIVE QUANTITATIVE METHODS OF MILK ANALYSIS
CLC/TS 50625-3-5:2017 Collection, logistics & Treatment requirements for WEEE - Part 3-5: Technical specification for de-pollution - Photovoltaic panels
12/30231423 DC : 0 BS ISO 13163-1 - WATER QUALITY - LEAD 210 - PART 1: LIQUID SCINTILLATION COUNTING METHOD
BS ISO 17089-1:2010 Measurement of fluid flow in closed conduits. Ultrasonic meters for gas Meters for custody transfer and allocation measurement
DIN EN 15842:2010-06 FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS
CSA Z11137-3 : 2007 : R2012 STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS
17/30349163 DC : 0 BS ISO 20387 - BIOTECHNOLOGY - BIOBANKING - GENERAL REQUIREMENTS FOR BIOBANKING
DIN EN ISO 6789-1 E : 2017 ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - PART 1: REQUIREMENTS AND METHODS FOR DESIGN CONFORMANCE TESTING AND QUALITY CONFORMANCE TESTING: MINIMUM REQUIREMENTS FOR DECLARATION OF CONFORMANCE (ISO 6789-1:2017)
BS ISO 18589-1:2005 Measurement of radioactivity in the environment. Soil General guidelines and definitions
PD CEN/TR 16469:2013 Hydrometry. Measurement of the rainfall intensity (liquid precipitation): requirements, calibration methods and field measurements
UNI CEN/TS 16450 : 2013 AMBIENT AIR - AUTOMATED MEASURING SYSTEMS FOR THE MEASUREMENT OF THE CONCENTRATION OF PARTICULATE MATTER (PM10; PM2,5)
08/30172647 DC : DRAFT OCT 2008 BS ISO 8729-2 - SHIPS AND MARINE TECHNOLOGY - MARINE RADAR REFLECTORS - PART 2: ACTIVE TYPE
NF ISO 13067 : 2012 MICROBEAM ANALYSIS - ELECTRON BACKSCATTER DIFFRACTION - MEASUREMENT OF AVERAGE GRAIN SIZE
BS ISO 24095:2009 Workplace air. Guidance for the measurement of respirable crystalline silica
BS EN 50215:2009 Railway applications — Rolling stock — Testing of rolling stock on completion of construction and before entry into service
14/30230935 DC : 0 BS EN ISO 4126-11 - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 11: PERFORMANCE TESTING
08/30190263 DC : DRAFT SEP 2008 BS EN ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS
BS EN 61701:2012 Salt mist corrosion testing of photovoltaic (PV) modules
BS EN 60904-8:2014 Photovoltaic devices Measurement of spectral responsivity of a photovoltaic (PV) device
PD ISO/TR 17219:2013 Review of human smoking behavior and recommendations for a new ISO standard for the machine smoking of cigarettes
IEEE/ANSI C63.22-2004 American National Standard Guide for Automated Electromagnetic Interference Measurements
BS EN 16450:2017 Ambient air. Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
DD IEC/TS 61400-23:2002 Wind turbine generator systems Full-scale structural testing of rotor blades
BS PD IEC TS 60076-19 : 2013 POWER TRANSFORMERS - PART 19: RULES FOR THE DETERMINATION OF UNCERTAINTIES IN THE MEASUREMENT OF THE LOSSES ON POWER TRANSFORMERS AND REACTORS
12/30237225 DC : 0 BS EN ISO 16187 - FOOTWEAR - TEST METHODS FOR UPPERS, LINING AND INSOCKS - ANTIBACTERIAL ACTIVITY
BS ISO 21187 : 2004 AMD 16006 MILK - QUANTITATIVE DETERMINATION OF BACTERIOLOGICAL QUALITY - GUIDANCE FOR ESTABLISHING AND VERIFYING A CONVERSION RELATIONSHIP BETWEEN ROUTINE METHOD RESULTS AND ANCHOR METHOD RESULTS
UNE-EN ISO 21148:2017 Cosmetics - Microbiology - General instructions for microbiological examination (ISO 21148:2017)
DIN EN ISO 12836:2015-11 DENTISTRY - DIGITIZING DEVICES FOR CAD/CAM SYSTEMS FOR INDIRECT DENTAL RESTORATIONS - TEST METHODS FOR ASSESSING ACCURACY (ISO 12836:2015)
BS EN 60068-2-65:2013 Environmental testing Tests. Test Fg: Vibration. Acoustically induced method
BS ISO 29473:2010 Fire tests. Uncertainty of measurements in fire tests
BS EN ISO 22282-1:2012 Geotechnical investigation and testing. Geohydraulic testing General rules
15/30309786 DC : 0 BS ISO 19722 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR DETERMINATION OF PHOTOCATALYTIC ACTIVITY ON SEMICONDUCTING PHOTOCATALYTIC MATERIALS BY DISSOLVED OXYGEN CONSUMPTION
BS ISO 13495:2013 Foodstuffs. Principles of selection and criteria of validation for varietal identification methods using specific nucleic acid
16/30333727 DC : 0 BS ISO 13276 - TOBACCO AND TOBACCO PRODUCTS - DETERMINATION OF NICOTINE PURITY - GRAVIMETRIC METHOD USING TUNGSTOSILICIC ACID
BS EN 60068-2-27:2009 Environmental testing Tests. Test Ea and guidance. Shock
16/30315132 DC : 0 BS EN 14450 - SECURE STORAGE UNITS - REQUIREMENTS, CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO BURGLARY - SECURE SAFE CABINETS
BS ISO 17824 : 2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND SCREENS
15/30297361 DC BS ISO 26261-3. Fireworks. Category 4. Part 3. Test methods
05/30133342 DC : DRAFT MAY 2005 ISO 18898 - RUBBER - CALIBRATION AND VERIFICATION OF HARDNESS TESTERS
DIN EN ISO 8534:2016-10 (Draft) ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF WATER CONTENT - KARL FISCHER METHOD (PYRIDINE FREE) (ISO 8534:2017)
S.R. CEN/TS 16165:2016 DETERMINATION OF SLIP RESISTANCE OF PEDESTRIAN SURFACES - METHODS OF EVALUATION
OIML D 8 : 2004 MEASUREMENT STANDARDS. CHOICE, RECOGNITION, USE, CONSERVATION AND DOCUMENTATION
DIN EN 16450 E : 2017 AMBIENT AIR - AUTOMATED MEASURING SYSTEMS FOR THE MEASUREMENT OF THE CONCENTRATION OF PARTICULATE MATTER (PM10; PM2,5)
BS ISO 21243:2008 Radiation protection. Performance criteria for laboratories performing cytogenetic triage for assessment of mass casualties in radiological or nuclear emergencies. General principles and application to dicentric assay
FM 1614 : 2017 FIBER REINFORCED COMPOSITE (FRC) PIPE AND FITTINGS FOR UNDERGROUND FIRE PROTECTION SERVICE
16/30334077 DC : 0 BS ISO 22241-3 - DIESEL ENGINES NO[X] REDUCTION AGENT AUS 32 - PART 3: HANDLING, TRANSPORTATION AND STORING
08/30123706 DC : DRAFT APR 2008 ISO 22282-1 - GEOTECHNICAL INVESTIGATION AND TESTING - GEOHYDRAULIC TESTING - PART 1: GENERAL RULES
BS ISO 11057:2011 Air quality. Test method for filtration characterization of cleanable filter media
BS EN ISO 11771:2010 Air quality. Determination of time-averaged mass emissions and emission factors. General approach
I.S. EN ISO 9241-307:2008 ERGONOMICS OF HUMAN-SYSTEM INTERACTION - PART 307: ANALYSIS AND COMPLIANCE TEST METHODS FOR ELECTRONIC VISUAL DISPLAYS
I.S. EN 304:2017 HEATING BOILERS - TEST CODE FOR HEATING BOILERS FOR ATOMIZING OIL BURNERS
BS EN 843-8:2010 Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature Guidelines for conducting proof tests
ANSI/AAMI/ISO 16142-2:2017 MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 2: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS
BS ISO 22196:2011 Measurement of antibacterial activity on plastics and other non-porous surfaces
UNI EN 15857 : 2010 NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION - TESTING OF FIBRE-REINFORCED POLYMERS - SPECIFIC METHODOLOGY AND GENERAL EVALUATION CRITERIA
UNI CEN/TS 1519-2 : 2012 PLASTIC PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLEN (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
BS EN 61377:1997 Electric traction. Rolling stock. Combined testing of inverter-fed alternating current motors and their control
BS EN 62008:2005 Performance characteristics and caliberation for digital data acquisition systems and relevant software
16/30337505 DC : 0 BS EN 60154-4 - FLANGES FOR WAVEGUIDES - PART 4: RELEVANT SPECIFICATIONS FOR FLANGES FOR CIRCULAR WAVEGUIDES
BS ISO 16962:2017 Surface chemical analysis. Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry
ISO 16000-4:2011 Indoor air Part 4: Determination of formaldehyde Diffusive sampling method
BS ISO 18400-106:2017 Soil quality. Sampling Quality control and quality assurance
MIL-STD-461 Revision G:2015 REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT
SAE J 2636 : 2015 CORROSION TEST MASTER ESTABLISHMENT
UNI EN 334 : 2009 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
CSA IEC 61646 : 2010 : R2014 THIN-FILM TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL
DIN EN 16801 E : 2016 FOODSTUFFS - DETERMINATION OF ELEMENTS AND THEIR CHEMICAL SPECIES - DETERMINATION OF METHYLMERCURY IN FOODSTUFFS OF MARINE ORIGIN BY ISOTOPE DILUTION GC-ICP-MS
S.R. CEN/TS 16645:2014 AMBIENT AIR - METHOD FOR THE MEASUREMENT OF BENZ[A]ANTHRACENE, BENZO[B]FLUORANTHENE, BENZO[J]FLUORANTHENE, BENZO[K]FLUORANTHENE, DIBENZ[A,H]ANTHRACENE, INDENO[1,2,3-CD]PYRENE AND BENZO[GHI]PERYLENE
INCITS/ISO/IEC 24709-1 : 2009 INFORMATION TECHNOLOGY - CONFORMANCE TESTING FOR THE BIOMETRIC APPLICATION PROGRAMMING INTERFACE (BIOAPI) - PART 1: METHODS AND PROCEDURES
BS ISO 5667-20:2008 Water quality. Sampling Guidance on the use of sampling data for decision making. Compliance with thresholds and classification systems
15/30290736 DC : 0 BS EN ISO 10993-4 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 4: SELECTION OF TESTS FOR INTERACTIONS WITH BLOOD
MIL-DTL-3702 Revision F:2012 CABLE, POWER, ELECTRICAL: IGNITION, HIGH-TENSION
15/30301014 DC : 0 BS EN 62764-1 ED 1.0 - MEASUREMENT PROCEDURES OF MAGNETIC FIELD LEVELS GENERATED BY ELECTRONIC AND ELECTRICAL EQUIPMENT IN THE AUTOMOTIVE ENVIRONMENT WITH RESPECT TO HUMAN EXPOSURE
PD IEC/TR 62296:2009 Considerations of unaddressed safety aspects in the second edition of IEC 60601-1 and proposals for new requirements
I.S. CEN TS 15234:2006 SOLID BIOFUELS - FUEL QUALITY ASSURANCE
BS ISO 16700:2004 Microbeam analysis. Scanning electron microscopy. Guidelines for calibrating image magnification
ISO 17842-3:2015 Safety of amusement rides and amusement devices Part 3: Requirements for inspection during design, manufacture, operation and use
07/30157023 DC : 0 BS EN ISO 15194 - IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION
MIL-DTL-6001 Revision B:2013 FITTINGS; AIRCRAFT, SOLDER TYPE, TUBE
DIN EN ISO 17161:2016-10 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - CERAMIC COMPOSITES - DETERMINATION OF THE DEGREE OF MISALIGNMENT IN UNIAXIAL MECHANICAL TESTS (ISO 17161:2014)
ISO 18385:2016 Minimizing the risk of human DNA contamination in products used to collect, store and analyze biological material for forensic purposes — Requirements
CEI EN 60068-2-65 : 2013 ENVIRONMENTAL TESTING - PART 2-65: TESTS - TEST FG: VIBRATION - ACOUSTICALLY INDUCED METHOD
BS ISO 5667-24:2016 Water quality. Sampling Guidance on the auditing of water quality sampling
BS EN 61215-1:2016 Terrestrial photovoltaic (PV) modules. Design qualification and type approval Test requirements
BS EN 60153-4:2017 Hollow metallic waveguides Relevant specifications for circular waveguides
17/30363956 DC : 0 BS EN 419 - GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY
CLC/TS 50625-3-3 : 2017 Collection, logistics & treatment requirements for WEEE - Part 3-3: Specification for de-pollution - WEEE containing CRTs and flat panel displays
17/30341085 DC : 0 BS EN ISO 13385-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: DESIGN AND METROLOGICAL CHARACTERISTICS OF CALLIPERS
PREN ISO 10077-2 : DRAFT 2009 THERMAL PERFORMANCE OF WINDOWS, DOORS AND SHUTTERS - CALCULATION OF THERMAL TRANSMITTANCE - PART 2: NUMERICAL METHOD FOR FRAMES
I.S. EN 50413:2008 BASIC STANDARD ON MEASUREMENT AND CALCULATION PROCEDURES FOR HUMAN EXPOSURE TO ELECTRIC, MAGNETIC AND ELECTROMAGNETIC FIELDS (0 HZ - 300 GHZ)
BS ISO 9370:2017 Plastics. Instrumental determination of radiant exposure in weathering tests. General guidance and basic test method
ISO 35103:2017 Petroleum and natural gas industries — Arctic operations — Environmental monitoring
PREN 843-6 : DRAFT 2009 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 6: GUIDANCE FOR FRACTOGRAPHIC INVESTIGATION
03/319405 DC : DRAFT NOV 2003 BS EN 14035-37 - FIREWORKS - PART 37: WHISTLERS - SPECIFICATION AND TEST METHODS
DD ENV 12923-2:2001 Advanced technical ceramics. Monolithic ceramics Oxidation test
ISO 24173:2009 Microbeam analysis — Guidelines for orientation measurement using electron backscatter diffraction
CEI UNI EN ISO/IEC 17050-1 : 2010 CONFORMITY ASSESSMENT - SUPPLIER'S DECLARATION OF CONFORMITY - PART 1: GENERAL REQUIREMENTS
04/30117386 DC : DRAFT JUL 2004 EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
CEI UNI EN ISO/IEC 17040 : 2008 CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PEER ASSESSMENT OF CONFORMITY ASSESSMENT BODIES AND ACCREDITATION BODIES
ISO 18400-107:2017 Soil quality — Sampling — Part 107: Recording and reporting
BS EN 15918 : 2011 CYCLES - CYCLE TRAILER - SAFETY REQUIREMENTS AND TEST METHODS
CEI EN 62716 : 2014 PHOTOVOLTAIC (PV) MODULES - AMMONIA CORROSION TESTING
I.S. EN 16852:2017 FOODSTUFFS - DETERMINATION OF ETHYL CARBAMATE IN STONE FRUIT SPIRITS, FRUIT MARC SPIRITS AND OTHER SPIRIT DRINKS - GC-MS METHOD
BS EN 60068-2-55:2013 Environmental testing Tests. Test Ee and guidance. Loose cargo testing including bounce
ISO 22196:2011 Measurement of antibacterial activity on plastics and other non-porous surfaces
S.R. CEN/TR 16469:2013 HYDROMETRY - MEASUREMENT OF THE RAINFALL INTENSITY (LIQUID PRECIPITATION): REQUIREMENTS, CALIBRATION METHODS AND FIELD MEASUREMENTS
BS EN ISO 17078-3:2009 Petroleum and natural gas industries. Drilling and production equipment Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels
09/30202310 DC : 0 BS EN 12514-2 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 2: SAFETY REQUIREMENTS AND TESTS - FEED PUMPS, CONTROL AND SAFETY DEVICES, SERVICE VESSELS
CEI EN 62369-1 : 2013 EVALUATION OF HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS FROM SHORT RANGE DEVICES (SRDS) IN VARIOUS APPLICATIONS OVER THE FREQUENCY RANGE 0 GHZ TO 300 GHZ - PART 1: FIELDS PRODUCED BY DEVICES USED FOR ELECTRONIC ARTICLE SURVEILLANCE, RADIO FREQUENCY IDENTIFICATION AND SIMILAR SYSTEMS
PREN 9133 : 200P1 AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - QUALIFICATION PROCEDURE FOR AEROSPACE STANDARD PRODUCTS
EN 1176-2:2017 Playground equipment and surfacing - Part 2: Additional specific safety requirements and test methods for swings
ASTM F 3087 : 2015 Standard Specification for Acrylic Molding Resins for Medical Implant Applications
ASHRAE 171 : 2017 METHOD OF TESTING FOR RATING SEISMIC AND WIND RESTRAINTS
UNE-EN 16623:2015 Paints and varnishes - Reactive coatings for fire protection of metallic substrates - Definitions, requirements, characteristics and marking
CSA C61215 : 2008 : R2013 CRYSTALLINE SILICON TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL
UNI EN ISO 20349 : 2011 PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR PROTECTING AGAINST THERMAL RISKS AND MOLTEN METAL SPLASHES AS FOUND IN FOUNDRIES AND WELDING - REQUIREMENTS AND TEST METHOD
I.S. EN 16020:2011 EXPLOSION DIVERTERS
OVE/ONORM EN 60904-4 : 2010 PHOTOVOLTAIC DEVICES - PART 4: REFERENCE SOLAR DEVICES - PROCEDURES FOR ESTABLISHING CALIBRATION TRACEABILITY
PD CEN/TS 17061:2017 Foodstuffs. Guidelines for the calibration and quantitative determination of pesticide residues and organic contaminants using chromatographic methods
I.S. EN ISO 14024:2000 ENVIRONMENTAL LABELS AND DECLARATIONS - TYPE 1 ENVIRONMENTAL LABELLING - PRINCIPLES AND PROCEDURES (ISO 14024:2018)
I.S. EN 50215:2009 RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE
UNI EN 843-6 : 2009 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 6: GUIDANCE FOR FRACTOGRAPHIC INVESTIGATION
DIN EN ISO 10703 E : 2015 WATER QUALITY - DETERMINATION OF THE ACTIVITY CONCENTRATION OF RADIONUCLIDES - METHOD BY HIGH RESOLUTION GAMMA-RAY SPECTROMETRY (ISO 10703:2007)
MIL-DTL-32371 Base Document:2012 Fittings, Adapter, Hydraulic and Pneumatic, Spherical to ORFS Connectors, 1500 to 3000 PSI, General Specification for
I.S. EN 62431:2008 REFLECTIVITY OF ELECTROMAGNETIC WAVE ABSORBERS IN MILLIMETRE WAVE FREQUENCY - MEASUREMENT METHODS
UNI EN 15358 : 2011 SOLID RECOVERED FUELS - QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THEIR APPLICATION TO THE PRODUCTION OF SOLID RECOVERED FUELS
BS EN ISO 9698:2015 Water quality. Determination of tritium activity concentration. Liquid scintillation counting method
I.S. EN 60153-4:2017 HOLLOW METALLIC WAVEGUIDES - PART 4: RELEVANT SPECIFICATIONS FOR CIRCULAR WAVEGUIDES
CEI EN 62129-2 : 2012 CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS
UNE-EN ISO 8534:2017 Animal and vegetable fats and oils - Determination of water content - Karl Fischer method (pyridine free) (ISO 8534:2017)
ISO 20245:2017 Cross-border trade of second-hand goods
UNI EN ISO 15175 : 2011 SOIL QUALITY - CHARACTERIZATION OF SOIL RELATED TO GROUNDWATER PROTECTION
I.S. EN ISO 20349:2010 PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR PROTECTING AGAINST THERMAL RISKS AND MOLTEN METAL SPLASHES AS FOUND IN FOUNDRIES AND WELDING - REQUIREMENTS AND TEST METHOD
ISO 10432:2004 Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment
CEI EN 60945 : 2003 MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - GENERAL REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS
DIN EN ISO 16664:2016-07 (Draft) GAS ANALYSIS - HANDLING OF CALIBRATION GASES AND GAS MIXTURES - GUIDELINES (ISO 16664:2017)
EN ISO 10703:2015 Water quality - Determination of the activity concentration of radionuclides - Method by high resolution gamma-ray spectrometry (ISO 10703:2007)
DIN ISO 16133:2006-06 SOIL QUALITY - GUIDANCE ON THE ESTABLISHMENT AND MAINTENANCE OF MONITORING PROGRAMMES
AAMI ST72 : 2011 : R2016 BACTERIAL ENDOTOXIN - TEST METHODS, ROUTINE MONITORING AND ALTERNATIVES TO BATCH TESTING
Z7396.1-17 Medical gas pipeline systems - Part 1: Pipelines for medical gases, medical vacuum, medical support gases, and anaesthetic gas scavenging systems
UNI EN ISO 5840-3 : 2013 CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 3: HEART VALVE SUBSTITUTES IMPLANTED BY TRANSCATHETER TECHNIQUES
I.S. EN ISO 12311:2013 PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR SUNGLASSES AND RELATED EYEWEAR (ISO 12311:2013, CORRECTED VERSION 2014-08-15)
DIN EN ISO 10808:2011-04 Nanotechnologies - Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing (ISO 10808:2010)
UNI CEN/TS 12666-2 : 2012 PLASTICS PIPING SYSTEMS FOR NON- PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
UNI EN 16009 : 2011 FLAMELESS EXPLOSION VENTING DEVICES
ASTM D 7659 : 2010 Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection
NFPA 2112 : 2018 FLAME-RESISTANT GARMENTS FOR PROTECTION OF INDUSTRIAL PERSONNEL AGAINST FLASH FIRE
CEI EN 61786-1 : 2014 MEASUREMENT OF DC MAGNETIC, AC MAGNETIC AND AC ELECTRIC FIELDS FROM 1 HZ TO 100 KHZ WITH REGARD TO EXPOSURE OF HUMAN BEINGS - PART 1: REQUIREMENTS FOR MEASURING INSTRUMENTS
PREN 303-5 : DRAFT 2010 CENTRAL-HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, HAND AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
DIN EN 15918 E : 2013 CYCLES - CYCLE TRAILERS - SAFETY REQUIREMENTS AND TEST METHODS
ISO 9697:2015 Water quality Gross beta activity in non-saline water Test method using thick source
IEC 62479:2010 Assessment of the compliance of low-power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz)
I.S. EN 62788-1-5:2016 MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-5: ENCAPSULANTS - MEASUREMENT OF CHANGE IN LINEAR DIMENSIONS OF SHEET ENCAPSULATION MATERIAL RESULTING FROM APPLIED THERMAL CONDITIONS
UNI EN 15964 : 2011 BREATH ALCOHOL TEST DEVICES OTHER THAN SINGLE USE DEVICES - REQUIREMENTS AND TEST METHODS
ASHRAE 30 : 2017 METHOD OF TESTING LIQUID CHILLERS
TR 103 540 : 1.1.1 ENVIRONMENTAL ENGINEERING (EE); MOBILE NETWORK (MN) ENERGY CONSUMPTION (EC) ESTIMATION METHOD; ENERGY ESTIMATION METHOD BASED ON STATISTICAL APPROACH
ISO/IEC 19823-13:2018 Information technology — Conformance test methods for security service crypto suites — Part 13: Cryptographic Suite Grain-128A
UNI EN 15496 : 2008 CYCLES - REQUIREMENTS AND TEST METHODS FOR CYCLE LOCKS
ISO 6565:2015 Tobacco and tobacco products — Draw resistance of cigarettes and pressure drop of filter rods — Standard conditions and measurement
NF ISO 11704 : 2010 WATER QUALITY - MEASUREMENT OF GROSS ALPHA AND BETA ACTIVITY CONCENTRATION IN NON-SALINE WATER - LIQUID SCINTILLATION COUNTING METHOD
SAE AS 6810 : 2018 REQUIREMENTS FOR ACCREDITATION BODIES WHEN ACCREDITING TEST LABORATORIES PERFORMING DETECTION OF SUSPECT/COUNTERFEIT IN ACCORDANCE WITH AS6171 GENERAL REQUIREMENTS AND THE ASSOCIATED TEST METHODS
I.S. EN 820-4:2009 ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 4: DETERMINATION OF FLEXURAL CREEP DEFORMATION AT ELEVATED TEMPERATURES
EN IEC 61730-2:2018/AC:2018-06 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING (IEC 61730-2:2016)
EN 50604-1:2016 Secondary lithium batteries for light EV (electric vehicle) applications - Part 1: General safety requirements and test methods
UNE-EN 16718:2016 Wood and wood based products - Dosage of the total organic carbon (TOC) in wood and wood based products
I.S. EN ISO 11665-3:2015 MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR: RADON-222 - PART 3: SPOT MEASUREMENT METHOD OF THE POTENTIAL ALPHA ENERGY CONCENTRATION OF ITS SHORT-LIVED DECAY PRODUCTS (ISO 11665-3:2012)
ISO/TS 11665-13:2017 Measurement of radioactivity in the environment — Air: radon 222 — Part 13: Determination of the diffusion coefficient in waterproof materials: membrane two-side activity concentration test method
EI/JIG 1530 : 2013 QUALITY ASSURANCE REQUIREMENTS FOR THE MANUFACTURE, STORAGE AND DISTRIBUTION OF AVIATION FUEL TO AIRPORTS
I.S. EN 843-8:2010 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 8: GUIDELINES FOR CONDUCTING PROOF TESTS
ANSI INCITS 409.4 : 2006 : R2011 BIOMETRIC PERFORMANCE TESTING AND REPORTING - PART 4: OPERATIONAL TESTING METHODOLOGIES
S.R. CEN/TS 1452-7:2014 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
I.S. EN ISO 24443:2012 DETERMINATION OF SUNSCREEN UVA PHOTOPROTECTION IN VITRO (ISO 24443:2012)
I.S. EN 62129-1:2016 CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 1: OPTICAL SPECTRUM ANALYZERS
ISO 12106:2017 Metallic materials — Fatigue testing — Axial-strain-controlled method
ISO/TS 12417:2011 Cardiovascular implants and extracorporeal systems Vascular device-drug combination products
FM 1615 : 2009 CAST IRON PIPE, FITTINGS AND COUPLINGS
DIN EN ISO 15175:2011-09 SOIL QUALITY - CHARACTERIZATION OF SOIL RELATED TO GROUNDWATER PROTECTION
ISEA 107 : 2015 HIGH-VISIBILITY SAFETY APPAREL AND ACCESSORIES
BS ISO 16889 : 2008 HYDRAULIC FLUID POWER - FILTERS - MULTI-PASS METHOD FOR EVALUATING FILTRATION PERFORMANCE OF A FILTER ELEMENT
BIS IS 14976 : 2012 CALIBRATION OF FIBRE-OPTIC POWER METERS
I.S. EN 1069-1:2017 WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN 50436-1:2014 ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 1: INSTRUMENTS FOR DRINK-DRIVING-OFFENDER PROGRAMS
SAE J 2718 : 2017 TEST FOR TIRE QUASI-STATIC LONGITUDINAL FORCE VERSUS LONGITUDINAL DISPLACEMENT AND QUASI-STATIC LATERAL FORCE VERSUS LATERAL FORCE
DIN EN 16924:2015-11 (Draft) FOODSTUFFS - DETERMINATION OF ZEARALENONE IN EDIBLE VEGETABLE OILS BY LC-FLD OR LC-MS/MS
ES 203 228 : 1.2.1 ENVIRONMENTAL ENGINEERING (EE); ASSESSMENT OF MOBILE NETWORK ENERGY EFFICIENCY
S.R. CWA 16275:2011 GUIDELINES FOR THE SELECTION OF CONSULTANTS ADVISING SMES ON INTEGRATED QUALITY, ENVIRONMENT, HEALTH AND SAFETY MANAGEMENT SYSTEMS
ISO 16000-3:2011 Indoor air — Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air — Active sampling method
UNE-EN 15267-4:2018 Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources
I.S. EN 16280:2012 BREATH ALCOHOL TEST DEVICES FOR GENERAL PUBLIC - REQUIREMENTS AND TEST METHODS
I.S. EN 14535-3:2015 RAILWAY APPLICATIONS - BRAKE DISCS FOR RAILWAY ROLLING STOCK - PART 3: BRAKE DISCS, PERFORMANCE OF THE DISC AND THE FRICTION COUPLE, CLASSIFICATION
I.S. EN ISO/IEC 17065:2012 CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES CERTIFYING PRODUCTS, PROCESSES AND SERVICES (ISO/IEC 17065:2012)
S.R. CEN TS 15675:2007 AIR QUALITY - MEASUREMENT OF STATIONARY SOURCE EMISSIONS - APPLICATION OF EN ISO/IEC 17025:2005 TO PERIODIC MEASUREMENTS
I.S. EN 16430-3:2014 FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 3: TEST METHOD AND RATING FOR COOLING CAPACITY
S.R. CEN ISO/TS 14027:2018 ENVIRONMENTAL LABELS AND DECLARATIONS - DEVELOPMENT OF PRODUCT CATEGORY RULES (ISO/TS 14027:2017)
I.S. EN ISO 13127:2012 PACKAGING - CHILD RESISTANT PACKAGING - MECHANICAL TEST METHODS FOR RECLOSABLE CHILD RESISTANT PACKAGING SYSTEMS (ISO 13127:2012)
BS EN 1630 : 2011 PEDESTRIAN DOORSETS, WINDOWS, CURTAIN WALLING, GRILLES AND SHUTTERS - BURGLAR RESISTANCE - TEST METHOD FOR THE DETERMINATION OF RESISTANCE TO MANUAL BURGLARY ATTEMPTS
PREN 14662-3 : DRAFT 2013 AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF BENZENE CONCENTRATIONS - PART 3: AUTOMATED PUMPED SAMPLING WITH IN SITU GAS CHROMATOGRAPHY
I.S. EN 61577-4:2014 RADIATION PROTECTION INSTRUMENTATION - RADON AND RADON DECAY PRODUCT MEASURING INSTRUMENTS - PART 4: EQUIPMENT FOR THE PRODUCTION OF REFERENCE ATMOSPHERES CONTAINING RADON ISOTOPES AND THEIR DECAY PRODUCTS (STAR)
AAMI ISO 11737-2 : 2009 : R2014 STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS
BS EN ISO 13017 : 2012 DENTISTRY - MAGNETIC ATTACHMENTS
I.S. EN ISO/IEC 27043:2016 INFORMATION TECHNOLOGY - SECURITY TECHNIQUES INCIDENT INVESTIGATION PRINCIPLES AND PROCESSES (ISO/IEC 27043:2015)
I.S. EN 16602-70-55:2015 SPACE PRODUCT ASSURANCE - MICROBIOLOGICAL EXAMINATION OF FLIGHT HARDWARE AND CLEANROOMS
I.S. EN 62321-1:2013 DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 1: INTRODUCTION AND OVERVIEW (IEC 62321-1:2013 (EQV))
S.R. CEN/TS 14632:2012 PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
EN ISO 13160:2015 Water quality - Strontium 90 and strontium 89 - Test methods using liquid scintillation counting or proportional counting (ISO 13160:2012)
BS EN 15461 : 2008 RAILWAY APPLICATIONS - NOISE EMISSION - CHARACTERISATION OF THE DYNAMIC PROPERTIES OF TRACK SECTIONS FOR PASS BY NOISE MEASUREMENTS
ISO/ASTM 51818:2013 Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 keV
I.S. EN ISO 11665-1:2015 MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR: RADON-222 - PART 1: ORIGINS OF RADON AND ITS SHORT-LIVED DECAY PRODUCTS AND ASSOCIATED MEASUREMENT METHODS (ISO 11665-1:2012)
AAMI ISO 11737-2 :2009 STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS
AAMI ISO TIR 17137 : 2014 CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - CARDIOVASCULAR ABSORBABLE IMPLANTS
DIN EN ISO/IEC 17000:2005-03 CONFORMITY ASSESSMENT - VOCABULARY AND GENERAL PRINCIPLES
I.S. EN 16457:2014 CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT
ISO 19628:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) — Thermophysical properties of ceramic composites — Determination of specific heat capacity
BS ISO 20906 : 2009 ACOUSTICS - UNATTENDED MONITORING OF AIRCRAFT SOUND IN THE VICINITY OF AIRPORTS
I.S. EN 16185-2:2014 RAILWAY APPLICATIONS - BRAKING SYSTEMS OF MULTIPLE UNIT TRAINS - PART 2: TEST METHODS
I.S. CEN TS 1071-7:2003 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 7: DETERMINATION OF HARDNESS AND YOUNG&#39;S MODULUS BY INSTRUMENTED INDENTATION TESTING
I.S. EN ISO 25178-70:2014 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014)
I.S. EN ISO 5667-6:2016 WATER QUALITY - SAMPLING - PART 6: GUIDANCE ON SAMPLING OF RIVERS AND STREAMS (ISO 5667-6:2014)
ISO 19613:2018 Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement of viscosity of ceramic slurry by use of a rotational viscometer
ISO 14021:2016 Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling)
UNE-EN ISO 5667-14:2017 Water quality - Sampling - Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling (ISO 5667-14:2014)
FM 2030 : 2009 RESIDENTIAL AUTOMATIC SPRINKLERS FOR FIRE PROTECTION
EN ISO 18753:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pycnometer (ISO 18753:2017)
I.S. EN 15892:2011 RAILWAY APPLICATIONS - NOISE EMISSION - MEASUREMENT OF NOISE INSIDE DRIVER&#39;S CABS
ISO 7503-3:2016 Measurement of radioactivity Measurement and evaluation of surface contamination Part 3: Apparatus calibration
BIS IS 12762-5 : 2014 PHOTOVOLTAIC DEVICES - PART 5: DETERMINATION OF THE EQUIVALENT CELL TEMPERATURE (ECT) OF PHOTOVOLTAIC (PV) DEVICES BY THE OPEN-CIRCUIT VOLTAGE METHOD
ISO/IEC 17007:2009 Conformity assessment — Guidance for drafting normative documents suitable for use for conformity assessment
ISO 2469:2014 Paper, board and pulps — Measurement of diffuse radiance factor (diffuse reflectance factor)
ISO 15790:2004 Graphic technology and photography — Certified reference materials for reflection and transmission metrology — Documentation and procedures for use, including determination of combined standard uncertainty
ISO 7240-13:2005 Fire detection and alarm systems Part 13: Compatibility assessment of system components
EN ISO 9697:2017 Water quality - Gross beta activity in non-saline water - Test method using thick source (ISO 9697:2015)
UNI CEN ISO/TS 22117 : 2011 MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - SPECIFIC REQUIREMENTS AND GUIDANCE FOR PROFICIENCY TESTING BY INTERLABORATORY COMPARISON
ISO 18562-1:2017 Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 1: Evaluation and testing within a risk management process
ISO/TS 10797:2012 Nanotechnologies Characterization of single-wall carbon nanotubes using transmission electron microscopy
ISO 15192:2010 Soil quality Determination of chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection
BS EN ISO 9241-306:2008 Ergonomics of human-system interaction Field assessment methods for electronic visual displays
BS ISO 13779-3:2008 Implants for surgery. Hydroxyapatite Chemical analysis and characterization of crystallinity and phase purity
I.S. EN 60068-2-64:2008 ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE
ISO/TS 21569-3:2015 Horizontal methods for molecular biomarker analysis Methods of analysis for the detection of genetically modified organisms and derived products Part 3: Construct-specific real-time PCR method for detection of P35S-pat-sequence for screening genetically modified organisms
AAMI ISO 11737-1 : 2006 : R2011 STERILIZATION OF MEDICAL DEVICES - MEDICAL DEVICES - PART 1: DETERMINATION OF THE POPULATION OF MICROORGANISMS ON PRODUCT
BS EN 15634-1:2009 Foodstuffs. Detection of food allergens by molecular biological methods General considerations
ISO 12242:2012 Measurement of fluid flow in closed conduits Ultrasonic transit-time meters for liquid
S.R. CEN/TR 16988:2016 ESTIMATION OF UNCERTAINTY IN THE SINGLE BURNING ITEM TEST
ISO 12963:2017 Gas analysis — Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
I.S. EN 61375-2-3:2015 ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 2-3: TCN COMMUNICATION PROFILE
ISO 8124-3:2010 Safety of toys Part 3: Migration of certain elements
PREN 15330-1 : DRAFT 2013 SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE
I.S. EN ISO 13506-1:2017 PROTECTIVE CLOTHING AGAINST HEAT AND FLAME - PART 1: TEST METHOD FOR COMPLETE GARMENTS - MEASUREMENT OF TRANSFERRED ENERGY USING AN INSTRUMENTED MANIKIN (ISO 13506-1:2017)
PREN 1906 : DRAFT 2009 BUILDING HARDWARE - LEVER HANDLES AND KNOB FURNITURE - REQUIREMENTS AND TEST METHODS
PREN ISO 15189 : DRAFT 2011 MEDICAL LABORATORIES - PARTICULAR REQUIREMENTS FOR QUALITY AND COMPETENCE
ISO 13164-4:2015 Water quality — Radon-222 — Part 4: Test method using two-phase liquid scintillation counting
I.S. EN 16583:2015 HEAT EXCHANGERS - HYDRONIC ROOM FAN COILS UNITS - DETERMINATION OF THE SOUND POWER LEVEL
ECMA 370 : 5ED 2015 TED - THE ECO DECLARATION
I.S. EN ISO 11665-6:2015 MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR: RADON-222 - PART 6: SPOT MEASUREMENT METHOD OF THE ACTIVITY CONCENTRATION (ISO 11665-6:2012)
I.S. EN 13616-1:2016 OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS -PART 1: OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE
DIN EN ISO 24443:2013-05 Determination of sunscreen UVA photoprotection in vitro (ISO 24443:2012)
UNI CEN/TS 1329-2 : 2012 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
BS ISO 15176:2002 Soil quality. Characterization of excavated soil and other soil materials intended for re-use
I.S. EN ISO 17932:2011 PALM OIL - DETERMINATION OF THE DETERIORATION OF BLEACHABILITY INDEX (DOBI) AND CAROTENE CONTENT (ISO 17932:2011)
ASTM F 2666 : 2016 : REDLINE Standard Specification for Aboveground Portable Pools for Residential Use
I.S. EN ISO 13383-1:2016 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MICROSTRUCTURAL CHARACTERIZATION - PART 1: DETERMINATION OF GRAIN SIZE AND SIZE DISTRIBUTION (ISO 13383-1:2012)
ISO 11665-9:2016 Measurement of radioactivity in the environment Air: Radon-222 Part 9: Test methods for exhalation rate of building materials
ISO 13304-1:2013 Radiological protection Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation Part 1: General principles
IEC 63004:2015 Standard for receiver fixture interface
I.S. EN ISO 9241-306:2008 ERGONOMICS OF HUMAN-SYSTEM INTERACTION - PART 306: FIELD ASSESSMENT METHODS FOR ELECTRONIC VISUAL DISPLAYS
BS EN ISO 19017:2017 Guidance for gamma spectrometry measurement of radioactive waste
ECA ILAC G26 : 2012 GUIDANCE FOR THE IMPLEMENTATION OF A MEDICAL LABORATORY ACCREDITATION SYSTEM
I.S. EN 61746-1:2011 CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 1: OTDR FOR SINGLE-MODE FIBRES
BS EN 15355 : 2008 RAILWAY APPLICATIONS - BRAKING - DISTRIBUTOR VALVES AND DISTRIBUTOR-ISOLATING DEVICES
ASTM F 2027 : 2016 : REDLINE Standard Guide for Characterization and Testing of Raw or Starting Materials for Tissue-Engineered Medical Products
I.S. EN 16164:2013 WATER QUALITY - GUIDANCE STANDARD FOR DESIGNING AND SELECTING TAXONOMIC KEYS
CEN ISO/TS 22391-7:2011 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 7: Guidance for the assessment of conformity (ISO/TS 22391-7:2011)
S.R. CEN/TS 15674:2007 AIR QUALITY - MEASUREMENT OF STATIONARY SOURCE EMISSIONS - GUIDELINES FOR THE ELABORATION OF STANDARDISED METHODS
ES 201 554 : 1.2.1 ENVIRONMENTAL ENGINEERING (EE); MEASUREMENT METHOD FOR ENERGY EFFICIENCY OF MOBILE CORE NETWORK AND RADIO ACCESS CONTROL EQUIPMENT
EN ISO 17201-1:2005/AC:2009 ACOUSTICS - NOISE FROM SHOOTING RANGES - PART 1: DETERMINATION OF MUZZLE BLAST BY MEASUREMENT
EN 1143-1:2012 Secure storage units - Requirements, classification and methods of test for resistance to burglary - Part 1: Safes, ATM safes, strongroom doors and strongrooms
DIN EN ISO 9698:2015-12 Water quality - Determination of tritium activity concentration - Liquid scintillation counting method (ISO 9698:2010)
BS EN ISO 19258:2011 Soil quality. Guidance on the determination of background values
IEC 62522:2014 Calibration of tuneable laser sources
I.S. EN 61215-1:2016 TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL - PART 1: TEST REQUIREMENTS
I.S. EN 61481-2:2014 LIVE WORKING - PHASE COMPARATORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES FROM 1 KV TO 36 KV A.C.
UNI EN 13623 : 2010 CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF BACTERICIDAL ACTIVITY AGAINST LEGIONELLA OF CHEMICAL DISINFECTANTS FOR AQUEOUS SYSTEMS - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 1)
UNE-EN 15507:2018 Packaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades
BS EN 14450:2017 Secure storage units. Requirements, classification and methods of test for resistance to burglary. Secure safe cabinets
CSA C61400-2:2008 WIND TURBINES - PART 2: DESIGN REQUIREMENTS FOR SMALL WIND TURBINES
S.R. CEN/TR 16478:2012 SURVEILLANCE FROM FIRST COMMISSIONING ON MEASURING DEVICES USED IN NATURAL GAS SUPPLY TO THE INSTALLATIONS OF THE ACTIVITIES UNDER THE DIRECTIVE 2003/87/EC ESTABLISHING A SCHEME OF CO[2] EMISSIONS TRADING
CEI EN 62124 : 2005 PHOTOVOLTAIC (PV) STAND-ALONE SYSTEMS - DESIGN VERIFICATION
UNE-EN ISO 18113-1:2012 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009)
IEEE TSS : 2014 SYNCHROPHASOR MEASUREMENT TEST SUITE SPECIFICATION
ISO/IEC TR 17026:2015 Conformity assessment Example of a certification scheme for tangible products
CEI UNI EN ISO/IEC 17065 : 2012 CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES CERTIFYING PRODUCTS, PROCESSES AND SERVICES
IEC Q 03-3 : 2.1 IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PROCEDURE - PART 3: IECQ APPROVED COMPONENT PRODUCTS, RELATED MATERIALS & ASSEMBLIES SCHEME
EN 16991:2018 Risk-based inspection framework
ASTM E 2328 : 2004 Standard Terminology Relating to Seized-Drug Analysis (Withdrawn 2005)
ISO/TS 14027:2017 Environmental labels and declarations — Development of product category rules
S.R. CEN/TS 15634-4:2016 FOODSTUFFS - DETECTION OF FOOD ALLERGENS BY MOLECULAR BIOLOGICAL METHODS - PART 4: PEANUT (ARACHIS HYPOGAEA) - QUALITATIVE DETECTION OF A SPECIFIC DNA SEQUENCE IN CHOCOLATE BY REAL-TIME PCR
EN ISO 13506-1:2017 Protective clothing against heat and flame - Part 1: Test method for complete garments - Measurement of transferred energy using an instrumented manikin (ISO 13506-1:2017)
ASTM E 2914 : 2014 Standard Practice for Ultrasonic Extraction of Lead from Composited Wipe Samples
NF EN 60216-4-1 : 2006