• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO/IEC Guide 51:2014

Current
Current

The latest, up-to-date edition.

Safety aspects Guidelines for their inclusion in standards
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French, Russian

Published date

25-03-2014

ISO/IEC Guide 51:2014 provides requirements and recommendations for the drafters of standards for the inclusion of safety aspects in standards. ISO/IEC Guide 51:2014 is applicable to any safety aspect related to people, property or the environment, or to a combination of these.

DocumentType
Guide
Pages
15
PublisherName
International Organization for Standardization
Status
Current
Supersedes

I.S. EN 50126-2:2017 RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 2: SYSTEMS APPROACH TO SAFETY
EN ISO 14031:2013 Environmental management - Environmental performance evaluation - Guidelines (ISO 14031:2013)
IEC 60695-11-2 : 3.0 FIRE HAZARD TESTING - PART 11-2: TEST FLAMES - 1 KW NOMINAL PRE-MIXED FLAME - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
UNE-EN 60695-11-5:2017 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
CEI EN 61784-3-12 : 2012 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-12: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 12
CEI EN 62209-2 : 2013 HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM HAND-HELD AND BODY-MOUNTED WIRELESS COMMUNICATION DEVICES - HUMAN MODELS, INSTRUMENTATION, AND PROCEDURES - PART 2: PROCEDURE TO DETERMINE THE SPECIFIC ABSORPTION RATE (SAR) FOR WIRELESS COMMUNICATION DEVICES USED IN CLOSE PROXIMITY TO THE HUMAN BODY (FREQUENCY RANGE OF 30 MHZ TO 6 GHZ)
PD IEC/TR 63039:2016 Probabilistic risk analysis of technological systems. Estimation of final event rate at a given initial state
15/30320611 DC : 0 BS EN 60445 - BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - IDENTIFICATION OF EQUIPMENT TERMINALS, CONDUCTOR TERMINATIONS AND CONDUCTORS
ISO/IEC Guide 71:2014 Guide for addressing accessibility in standards
I.S. EN ISO 5840:2009 CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES
BS EN 60255-1:2010 Measuring relays and protection equipment Common requirements
BS EN 31010:2010 Risk management. Risk assessment techniques
CEI EN 61508-3 : 2011 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 3: SOFTWARE REQUIREMENTS
PD ISO/TR 27809:2007 Health informatics. Measures for ensuring patient safety of health software
BS EN 60695-11-3:2012 Fire hazard testing Test flames. 500 W flames. Apparatus and confirmational test methods
ISO 20426:2018 Guidelines for health risk assessment and management for non-potable water reuse
BS EN 60695-4:2012 Fire hazard testing Terminology concerning fire tests for electrotechnical products
04/30089749 DC : DRAFT DEC 2004 BS EN 62304 - MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE-CYCLE PROCESSES
BS PAS 100(2002) : 2002 SPECIFICATION FOR COMPOSTED MATERIALS
BS EN ISO 10218-1:2011 Robots and robotic devices. Safety requirements for industrial robots Robots
PD CLC/TR 62685:2011 Industrial communication networks. Profiles. Assessment guideline for safety devices using IEC 61784-3 functional safety communication profiles (FSCPs)
CSA C22.2 No. 0.8 : 2012 : INC : UPD 1 : 2013 SAFETY FUNCTIONS INCORPORATING ELECTRONIC TECHNOLOGY
BS ISO 16110-1:2007 Hydrogen generators using fuel processing technologies Safety
BS EN 60695-1-40:2014 Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Insulating liquids
07/30169692 DC : 0 BS EN 60695-2-12 - FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS
ANSI/AAMI CI86:2017 COCHLEAR IMPLANT SYSTEMS: REQUIREMENTS FOR SAFETY, FUNCTIONAL VERIFICATION, LABELING AND RELIABILITY REPORTING
BS ISO 22559-1:2014 Safety requirements for lifts (elevators) Global essential safety requirements (GESRs)
ISO/TS 25238:2007 Health informatics Classification of safety risks from health software
CEI EN 61131-6 : 2013 PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY
I.S. EN ISO 22000:2005 FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS FOR ANY ORGANIZATION IN THE FOOD CHAIN
10/30192214 DC : 0
DD ISO/TS 12805:2011 Nanotechnologies. Materials specifications. Guidance on specifying nano-objects
BS EN 61131-6:2012 Programmable controllers Functional safety
I.S. EN 61326-3-1:2017 ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-1: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - GENERAL INDUSTRIAL APPLICATIONS
BS EN 60695-7-3:2011 Fire hazard testing Toxicity of fire effluent. Use and interpretation of test results
I.S. EN ISO 11074:2015 SOIL QUALITY - VOCABULARY (ISO 11074:2015)
CEI R205-012 : 1998 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - TECHNICAL REPORT 12: GUIDELINES ON REQUIREMENTS FOR FUNCTIONAL SAFETY OF PRODUCTS INTENDED TO BE INTEGRATED IN A HOME CONTROL SYSTEM
CEI EN 60695-1-30 : 2010 FIRE HAZARD TESTING - PART 1-30: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - PRESELECTION TESTING PROCESS - GENERAL GUIDELINES
03/523672 DC : DRAFT MAR 2003 IEC TS 60479-4 ED.1.0 - EFFECTS OF CURRENT ON HUMAN BEINGS AND LIVESTOCK - PART 4: EFFECTS OF LIGHTNING STROKES ON HUMAN BEINGS AND LIVESTOCK
UNE-EN 60695-1-20:2016 Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance
ISO 14117:2012 Active implantable medical devices Electromagnetic compatibility EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devices
03/302193 DC : DRAFT FEB 2003
13/30279579 DC : 0 BS ISO 19372 - MICROTURBINES APPLICATIONS - SAFETY
PD ISO/TS 17518:2015 Medical laboratories. Reagents for staining biological material. Guidance for users
03/302192 DC : DRAFT FEB 2003
09/30206172 DC : 0 BS EN 60695-7-3 ED.1 - FIRE HAZARD TESTING - PART 7-3: TOXICITY OF FIRE EFFLUENT - USE AND INTERPRETATION OF TEST RESULTS
BS EN 82079-1:2012 Preparation of instructions for use. Structuring, content and presentation General principles and detailed requirements
DIN ISO 14835-1:2005-12 MECHANICAL VIBRATION AND SHOCK - COLD PROVOCATION TESTS FOR THE ASSESSMENT OF PERIPHERAL VASCULAR FUNCTION - PART 1: MEASUREMENT AND EVALUATION OF FINGER SKIN TEMPERATURE
PD IEC/TR 62154:2005 Terminology in the area of Information structures, documentation and graphical symbols
BS EN 60695-1-10:2017 Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. General guidelines
05/30117627 DC : DRAFT JUNE 2005 BS ISO 11228-3 - ERGONOMICS - MANUAL HANDLING - PART 3: HANDLING OF LOW LOADS AT HIGH FREQUENCY
13/30294110 DC : 0 BS EN 61784-3-X ED 1.0 - INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-X: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF X
16/30346073 DC : 0 BS ISO 16142-2 - MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 2: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS
06/30112971 DC : DRAFT JULY 2006 ISO/IEC 62366 - MEDICAL DEVICES - APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES
UNE-EN 61821:2015 Electrical installations for lighting and beaconing of aerodromes - Maintenance of aeronautical ground lighting constant current series circuits
PD IEC/TS 62492-2:2013 Industrial process control devices. Radiation thermometers Determination of the technical data for radiation thermometers
08/30193470 DC : DRAFT NOV 2008 BS EN 61508-6 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 6: GUIDELINES ON THE APPLICATION OF IEC 61508-2 AND IEC 61508-3
NF EN 60695-7-1 : 2011 FIRE HAZARD TESTING - PART 7-1: TOXICITY OF FIRE EFFLUENT - GENERAL GUIDANCE
I.S. EN ISO 4007:2012 PERSONAL PROTECTIVE EQUIPMENT - EYE AND FACE PROTECTION - VOCABULARY (ISO 4007:2012)
03/304741 DC : DRAFT APR 2003 IEC 60601-1-6 ED.1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-6: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD - USABILITY
CEI EN 60695-9-1 : 2014 FIRE HAZARD TESTING - PART 9-1: SURFACE SPREAD OF FLAME - GENERAL GUIDANCE
14/30287226 DC : 0 BS EN ISO 15378 - PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP)
05/30134150 DC : DRAFT MAY 2005 EN 15233 - METHODOLOGY FOR FUNCTIONAL SAFETY ASSESSMENT OF PROTECTIVE SYSTEMS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES
BS EN 60446:2007 Basic and safety principles for man-machine interface, marking and identification. Identification of conductors by colours or alphanumerics
BS EN 50090-2-3:2005 Home and building electronic systems (HBES) System overview. General functional safety requirements for products intended to be integrated in HBES
EN 50126-2:2017 Railway Applications - The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) - Part 2: Systems Approach to Safety
CEI 89-38 : 2014 FIRE HAZARD TESTING - PART 11-11: TEST FLAMES - DETERMINATION OF THE CHARACTERISTIC HEAT FLUX FOR IGNITION FROM A NON-CONTACTING FLAME SOURCE
PD ISO/TR 18786:2014 Health and safety in welding. Guidelines for risk assessment of welding fabrication activities
BS EN ISO 15194:2009 In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for certified reference materials and the content of supporting documentation
DIN EN 16704-1:2017-11 RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 1: RAILWAY RISKS AND COMMON PRINCIPLES FOR PROTECTION OF FIXED AND MOBILE WORK SITES
DD ISO/TS 25740-1:2011 Safety requirements for escalators and moving walks Global essential safety requirements (GESR)
I.S. EN 60601-1-10:2008 MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS
BS EN 61784-3-2:2017 Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 2
CSA C22.2 No. 60065 : 2016 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
BS EN 50126-2:2017 Railway Applications. The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) Systems Approach to Safety
09/30179627 DC : 0 BS ISO 4007 - PERSONAL PROTECTIVE EQUIPMENT - EYE AND FACE PROTECTION - VOCABULARY
PD IEC/TR 61508-0:2005 Functional safety of electrical/electronic/programmable electronic safety-related systems Functional safety and IEC 61508
PD CEN/TR 14489:2005 Fire-resistant hydraulic fluids. Classification and specification. Guidelines on selection for the protection of safety, health and the environment
17/30337986 DC : 0 BS EN ISO 20815 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRODUCTION ASSURANCE AND RELIABILITY MANAGEMENT
BS EN 62282-3-1:2007 Fuel cell technologies Stationary fuel cell power systems. Safety
PD ISO/IEC GUIDE 71:2014 Guide for addressing accessibility in standards
I.S. ENV 14459:2003 METHOD OF RISK ANALYSIS AND RECOMMENDATIONS FOR THE USE OF ELECTRONICS IN SYSTEMS FOR THE CONTROL OF GAS BURNERS AND GAS BURNING APPLIANCES
CEI EN 62271-204 : 2012 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 204: RIGID GAS-INSULATED TRANSMISSION LINES FOR RATED VOLTAGES ABOVE 52 KV
PD IEC GUIDE 118:2017 Inclusion of energy efficiency aspects in electrotechnical publications
BS PD IEC TR 62685 : 2010 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - ASSESSMENT GUIDELINE FOR SAFETY DEVICES USING IEC 61784-3 FUNCTIONAL SAFETY COMMUNICATION PROFILES (FSCPS)
DD IEC/TS 60695-11-3:2004 Fire hazard testing Test flames. 500 W flames. Apparatus and confirmational test methods
BS EN 60695-2-11:2014 Fire hazard testing Glowing/hot-wire based test methods. Glow-wire flammability test method for end-products (GWEPT)
BIS IS 16046 : 2015 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR PORTABLE SEALED SECONDARY CELLS, AND FOR BATTERIES MADE FROM THEM, FOR USE IN PORTABLE APPLICATIONS
BS IEC 61508-7 : 2000 AMD 13785 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 7: OVERVIEW OF TECHNIQUES AND MEASURES
IEC TR 62354:2014 General testing procedures for medical electrical equipment
CSA Z1002 : 2012 : INC : UPD 2 : 2014 OCCUPATIONAL HEALTH AND SAFETY - HAZARD IDENTIFICATION AND ELIMINATION AND RISK ASSESSMENT AND CONTROL
06/30153111 DC : DRAFT JULY 2006
ES 203 408 : 1.1.1 ENVIRONMENTAL ENGINEERING (EE); COLOUR AND MARKING OF DC CABLE AND CONNECTING DEVICES
08/30193509 DC : DRAFT NOV 2008 BS EN 61508-2 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 2: REQUIREMENTS FOR ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS
IEC TS 60479-2:2017 Effects of current on human beings and livestock - Part 2: Special aspects
EN 61784-3-3:2017 Industrial communication networks - Profiles - Part 3-3: Functional safety fieldbuses - Additional specifications for CPF 3
95/208053 DC : DRAFT JUNE 1995 IEC 61508-1 - FUNCTIONAL SAFETY - SAFETY RELATED SYSTEMS - PART 1: GENERAL REQUIREMENTS
BS ISO 3534-2:2006 Statistics. Vocabulary and symbols Applied statistics
IEC 60695-11-5:2016 RLV Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
08/30184169 DC : DRAFT JUNE 2008 BS EN 61243-3 - LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE
05/30127785 DC : DRAFT JAN 2005 IEC 60695-2-12 ED.2 - FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW WIRE FLAMMABILITY TEST METHODS FOR MATERIALS
I.S. CEN TS 15277:2006 NON-ACTIVE SURGICAL IMPLANTS - INJECTABLE IMPLANTS
CSA ISO 14971 : 2007 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
CSA ISO/TS 22559-1:2007 SAFETY REQUIREMENTS FOR LIFTS (ELEVATORS) - PART 1: GLOBAL ESSENTIAL SAFETY REQUIREMENTS (GESRS)
CSA ISO/IEC 16085 : 2007 SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE PROCESSES - RISK MANAGEMENT
CSA Z15190 : 2005 : R2010 MEDICAL LABORATORIES - REQUIREMENTS FOR SAFETY
CSA ISO/TS 22559-1 : 2007 : R2016 SAFETY REQUIREMENTS FOR LIFTS (ELEVATORS) - PART 1: GLOBAL ESSENTIAL SAFETY REQUIREMENTS (GESRS)
UNE-EN 60695-9-1:2013 Fire hazard testing - Part 9-1: Surface spread of flame - General guidance
CAN/CSA-Z1002-12 (R2017) Occupational health and safety - Hazard identification and elimination and risk assessment and control
ISO/TS 19880-1:2016 Gaseous hydrogen Fuelling stations Part 1: General requirements
ISO/TS 12901-1:2012 Nanotechnologies Occupational risk management applied to engineered nanomaterials Part 1: Principles and approaches
ISO/TS 22559-2:2010 Safety requirements for lifts (elevators) Part 2: Safety parameters meeting the global essential safety requirements (GESRs)
ISO 16142-1:2016 Medical devices — Recognized essential principles of safety and performance of medical devices — Part 1: General essential principles and additional specific essential principles for all non-IVD medical devices and guidance on the selection of standards
ISO 18758-2:2018 Mining and earth-moving machinery — Rock drill rigs and rock reinforcement rigs — Part 2: Safety requirements
I.S. EN 60445:2017 BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - IDENTIFICATION OF EQUIPMENT TERMINALS, CONDUCTOR TERMINATIONS AND CONDUCTORS
I.S. EN 60695-11-20:2015 FIRE HAZARD TESTING - PART 11-20: TEST FLAMES - 500 W FLAME TEST METHODS
EN 62133-1:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications - Part 1: Nickel systems
GOST ISO 14698-1 : 2005 CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 1: GENERAL PRINCIPLES AND METHODS
AAMI TIR57 : 2016 PRINCIPLES FOR MEDICAL DEVICE SECURITY - RISK MANAGEMENT
IEC TR 62348:2012 Assessment of the impact of the most significant changes in Amendment 1 to IEC 60601-1:2005 and mapping of the clauses of IEC 60601-1:2005 to the previous edition
ISO/TR 25743:2010 Lifts (elevators) Study of the use of lifts for evacuation during an emergency
IEC 60669-1 REDLINE : 4ED 2017 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
I.S. EN 61784-3-17:2017 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-17: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 17
IEC 60445:2017 Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
I.S. EN 62271-200:2012 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 200: A.C. METAL-ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV (IEC 62271-200:2011 (EQV))
EN 50126-1:2017 Railway Applications - The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) - Part 1: Generic RAMS Process
I.S. EN 62271-212:2017 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 212: COMPACT EQUIPMENT ASSEMBLY FOR DISTRIBUTION SUBSTATION (CEADS)
ISO 16142-2:2017 Medical devices — Recognized essential principles of safety and performance of medical devices — Part 2: General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards
CEI EN 60695-1-21 : 1ED 2017 FIRE HAZARD TESTING - PART 1-21: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - SUMMARY AND RELEVANCE OF TEST METHODS
UNI EN ISO 12100 : 2010 SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION
CEN Guide 12:2006 Child safety - Guidance for its inclusion in standards
BS EN 62209-2:2010 Human exposure to radio frequency fields from hand-held and bodymounted wireless communication devices. Human models, instrumentation, and procedures Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)
ISO 8124-2:2014 Safety of toys — Part 2: Flammability
DIN EN ISO 22300 E : 2014 SOCIETAL SECURITY - TERMINOLOGY (ISO 22300:2012)
I.S. EN 61293:1995 MARKING OF ELECTRICAL EQUIPMENT WITH RATINGS RELATED TO ELECTRICAL SUPPLY - SAFETY REQUIREMENTS (IEC 1293:1994)
S.R. CEN/TR 16467:2013 PLAYGROUND EQUIPMENT ACCESSIBLE FOR ALL CHILDREN
I.S. EN 60695-2-10:2013 FIRE HAZARD TESTING - PART 2-10: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE (IEC 60695-2-10:2013 (EQV))
I.S. EN 60695-2-11:2014 FIRE HAZARD TESTING - PART 2-11: GLOWING/HOTWIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY TEST METHOD FOR END-PRODUCTS (GWEPT)
NF EN 61508-2 : 2011 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 2: REQUIREMENTS FOR ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS
BS EN 60086-4:2015 Primary batteries Safety of lithium batteries
IEC TS 60695-6-2:2005 Fire hazard testing - Part 6-2: Smoke obscuration - Summary and relevance of test methods
NF EN 60695-11-4 : 2012 FIRE HAZARD TESTING - PART 11-4: TEST FLAMES - 50 W FLAMES - APPARATUS AND CONFIRMATIONAL TEST METHODS
I.S. EN ISO 15194:2009 IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION
PD ISO/TS 17137:2014 Cardiovascular implants and extracorporeal systems. Cardiovascular absorbable implants
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 :2015 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
AAMI ES60601-1 : 2005 : INC : AMD 1 : 2012 : R201200 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
AAMI ES60601-1 : 2005 : INC : AMD 2 : 2012 : R201200 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
AAMI ES60601-1 : 2005 : R2012 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
EN 60335-1:2012/A13:2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
IEC 61010-031:2015 RLV Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test
CAN/CSA-C22.2 NO. 61010-031:17 Safety requirements for electrical equipment for measurement, control and laboratory use Part 031: Safety requirements for hand-held and hand-manipulated probe assemblies for electrical test and measurement (Binational standard with UL 61010-031)
CSA C22.2 No. 62368-1 : 2014 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
DIN EN ISO 14698-1 E : 2004 CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 1: GENERAL PRINCIPLES AND METHODS
DIN EN 1005-5:2007-05 Safety of machinery - Human physical performance - Part 5: Risk assessment for repetitive handling at high frequency
DIN EN ISO 22000:2005-11 FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS FOR ANY ORGANIZATION IN THE FOOD CHAIN
EN 60695-9-2:2014 Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods
IEC 60086-5:2016 RLV Primary batteries - Part 5: Safety of batteries with aqueous electrolyte
BS EN 60519-1:2015 Safety in installations for electroheating and electromagnetic processing General requirements
15/30319022 DC : 0 BS EN 60990 ED 3.0 - METHODS OF MEASUREMENT OF TOUCH CURRENT AND PROTECTIVE CONDUCTOR CURRENT
UNE-EN 62271-212:2017 High-voltage switchgear and controlgear - Part 212: Compact Equipment Assembly for Distribution Substation (CEADS)
PD IEC/TR 62368-2:2015 Audio/video, information and communication technology equipment Explanatory information related to IEC 62368-1
IEC 60086-5:2016 Primary batteries - Part 5: Safety of batteries with aqueous electrolyte
ISO 13702:2015 Petroleum and natural gas industries — Control and mitigation of fires and explosions on offshore production installations — Requirements and guidelines
UNE-EN 61140:2017 Protection against electric shock - Common aspects for installation and equipment
BS EN ISO 14031:2013 Environmental management. Environmental performance evaluation. Guidelines
UNE-EN 60695-8-2:2017 Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods
13/30238229 DC : 0 BS EN 62052-31 - ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TEST AND TEST CONDITIONS - PART 31: PRODUCT SAFETY REQUIREMENTS
11/30253145 DC : 0 BS EN 62271-202 ED2 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION
BS EN ISO 14630:2012 Non-active surgical implants. General requirements
IEC 62282-3-1:2007 Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety
IEC 60990:2016 Methods of measurement of touch current and protective conductor current
IEC 60695-7-1:2010 Fire hazard testing - Part 7-1: Toxicity of fire effluent - General guidance
IEC 60695-1-40:2013 Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids
IEC 61508-3:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508)
IEC 61326-3-1:2017 Electrical equipment for measurement, control and laboratory use - EMC requirements – Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) – General industrial applications
EN 61326-3-2:2008 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment
EN 60695-1-10:2017 Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines
EN 62052-31:2016 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests
EN 1050 : 1996 SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
CLC/TR 50126-2:2007 Railway applications - The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS) - Part 2: Guide to the application of EN 50126-1 for safety
EN 61243-3:2014/AC:2015 LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE
EN 62282-3-1 : 2007 FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
EN 60707 : 1999 FLAMMABILITY OF SOLID NON-METALLIC MATERIALS WHEN EXPOSED TO FLAME SOURCES - LIST OF TEST METHODS
EN 61293:1994 Marking of electrical equipment with ratings related to electrical supply - Safety requirements
EN 60695-7-2:2011 Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods
EN 60695-7-3 : 2011 FIRE HAZARD TESTING - PART 7-3: TOXICITY OF FIRE EFFLUENT - USE AND INTERPRETATION OF TEST RESULTS (IEC 60695-7-3:2011)
EN 62304:2006/A1:2015 MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE-CYCLE PROCESSES (IEC 62304:2006/A1:2015)
EN 60695-2-10:2013 Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
EN 61960-2:2001 Secondary lithium cells and batteries for portable applications - Part 2: Secondary lithium batteries
IEC 60695-1-10:2016 RLV Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines
EN 60695-1-11:2015 Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment
CEN/TR 15592:2007 Health services - Quality management systems - Guide for the use of EN ISO 9004:2000 in health services for performance improvement
EN 61131-6:2012 Programmable controllers - Part 6: Functional safety
EN 61508-2:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems
DIN EN ISO 12100-1:2004-04 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
EN 60086-5:2016 Primary batteries - Part 5: Safety of batteries with aqueous electrolyte
EN 62271-201:2014 High-voltage switchgear and controlgear - Part 201: AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
DIN EN 16704-1:2017-11 Railway applications - Track - Safety protection on the track during work - Part 1: Railway risks and common principles for protection of fixed and mobile work sites
EN 62366 : 2008 AMD 1 2015 MEDICAL DEVICES - APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES (IEC 62366:2007/A1:2014)
EN 61784-3-1:2010 Industrial communication networks - Profiles - Part 3-1: Functional safety fieldbuses - Additional specifications for CPF 1
EN 60990:2016 Methods of measurement of touch current and protective conductor current
EN 60519-1:2015 Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
EN 60730-1:2016 Automatic electrical controls - Part 1: General requirements
EN 60695-11-4 : 2011 FIRE HAZARD TESTING - PART 11-4: TEST FLAMES - 50 W FLAME - APPARATUS AND CONFIRMATIONAL TEST METHOD (IEC 60695-11-4:2011)
EN 60073:2002 Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
EN 62271-212:2017 High-voltage switchgear and controlgear - Part 212: Compact Equipment Assembly for Distribution Substation (CEADS)
EN 60695-8-2:2017 Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods
CEN/TS 15260:2006 Health informatics - Classification of safety risks from health informatics products
EN 62271-202:2014/AC:2014 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION (IEC 62271-202:2014)
EN 61069-7:2016 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 7: Assessment of system safety
EN 61800-5-2:2017 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
EN 60695-1-30:2017 Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines
EN 61784-3-6:2010 Industrial communication networks - Profiles - Part 3-6: Functional safety fieldbuses - Additional specifications for CPF 6
EN 60447:2004 Basic and safety principles for man-machine interface, marking and identification - Actuating principles
DIN EN ISO 14698-1:2004-04 Cleanrooms and associated controlled environments - Biocontamination control - Part 1: General principles and methods (ISO 14698-1:2003)
EN 61784-3-14:2010 Industrial communication networks - Profiles - Part 3-14: Functional safety fieldbuses - Additional specifications for CPF 14
EN 61821:2011 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - MAINTENANCE OF AERONAUTICAL GROUND LIGHTING CONSTANT CURRENT SERIES CIRCUITS (IEC 61821:2011)
EN 60695-2-12:2010/A1:2014 FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS (IEC 60695-2-12:2010/A1:2014)
CEN/TR 16467:2013 Playground equipment accessible for all children
EN 60695-1-21:2016 Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods
EN 1005-5:2007 Safety of machinery - Human physical performance - Part 5: Risk assessment for repetitive handling at high frequency
EN 62570:2015 Standard practice for marking medical devices and other items for safety in the magnetic resonance environment
BS 7430(2011) : 2011 CODE OF PRACTICE FOR PROTECTIVE EARTHING OF ELECTRICAL INSTALLATIONS
OVE/ONORM EN 60695-7-2 : 2013 FIRE HAZARD TESTING - PART 7-2: TOXICITY OF FIRE EFFLUENT - SUMMARY AND RELEVANCE OF TEST METHODS (IEC 60695-7-2:2011)
VDI 5700 Blatt 1:2015-04 Reprocessing hazards - Risk management in reprocessing of medical devices - Measures for risk control
OVE/ONORM EN 62271-204 : 2012 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 204: RIGID GAS-INSULATED TRANSMISSION LINES FOR RATED VOLTAGE ABOVE 52 KV (IEC 62271-204:2011)
OVE/ONORM EN 61936-1 : 2015 AC AUG 2017 POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES (IEC 61936-1:2010, MOD. + COR.:2011 + A1:2014)
BS ISO 19611:2017 Traditional Chinese medicine. Air extraction cupping device
BS EN 61513:2013 Nuclear power plants. Instrumentation and control important to safety. General requirements for systems
12/30235270 DC : 0 BS EN 50126-2 - RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 2: SYSTEMS APPROACH TO SAFETY
IEC 61800-5-2 REDLINE : 2ED 2016 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL
UNE-EN 61508-1:2011 Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 1: General requirements
BS EN 61508-1:2010 Functional safety of electrical/electronic/ programmable electronic safety-related systems General requirements
ISO/TR 20520:2018 Traditional Chinese medicine Infection control for acupuncture treatment
NF EN 61131-6 : 2013 PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY
17/30321076 DC : 0 BS ISO 22000 - FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS FOR ANY ORGANIZATION IN THE FOOD CHAIN
17/30359001 DC : 0 BS ISO/IEC GUIDE 63 - GUIDE TO THE DEVELOPMENT AND INCLUSION OF ASPECTS OF SAFETY IN INTERNATIONAL STANDARDS FOR MEDICAL DEVICES
BS ISO 14798 : 2009 LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - RISK ASSESSMENT AND REDUCTION METHODOLOGY
PD ISO/TR 21245-1:2016 Railway applications. Rail project planning process Stakeholders and their needs/interests
15/30328959 DC : 0 BS ISO 16142-2 - MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 2: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS
15/30274589 DC : 0 BS EN ISO 17776 - PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - MAJOR ACCIDENT HAZARD MANAGEMENT DURING THE DESIGN OF NEW INSTALLATIONS
UNE-EN 62271-204:2012 High-voltage switchgear and controlgear - Part 204: Rigid gas-insulated transmission lines for rated voltage above 52 kV
BS ISO 19202-2:2017 Summer toboggan runs Safety requirements for operation
I.S. EN 82304-1:2017 HEALTH SOFTWARE - PART 1: GENERAL REQUIREMENTS FOR PRODUCT SAFETY
BS EN 60695-7-1:2010 Fire hazard testing Toxicity of fire effluent. General guidance
IEC TS 60695-1-40:2002 Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids
UNE-ISO GUIA 73:2010 IN Risk management. Vocabulary
UNE-ISO 22300:2013 Societal security — Terminology
BS EN 60695-11-10:2013 Fire hazard testing Test flames. 50 W horizontal and vertical flame test methods
09/30206613 DC : 0 BS EN 60695-11-20 ED.2 - FIRE HAZARD TESTING - PART 11-20: TEST FLAMES - 500 W FLAME TEST METHODS
IEC 61326-3-2 : 2.0 ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-2: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - INDUSTRIAL APPLICATIONS WITH SPECIFIED ELECTROMAGNETIC ENVIRONMENT
ISO/TR 27809:2007 Health informatics Measures for ensuring patient safety of health software
CAN/CSA-C22.2 NO. 61508-3:17 Functional safety of electrical/electronic/programmable electronic safety-related systems — Part 3: Software requirements (Adopted IEC 61508-3:2010, second edition, 2010-04, with Canadian deviations) | Sécurité fonctionnelle des systèmes électriques/électroniques/électroniques programmables relatifs à la sécurité — Partie 3 : Exigences concernant les logiciels (norme IEC 61508-3:2010 adoptée, deuxième édition, 2010-04, avec exigences propres au Canada)
13/30286759 DC : 0 BS ISO GUIDE 82 - GUIDE FOR ADDRESSING SUSTAINABILITY IN STANDARDS
DD IEC/TS 60695-8-3:2008 Fire hazard testing Heat release. Heat release of insulating liquids used in electrotechnical products
BS EN 60695-9-1:2013 Fire hazard testing Surface spread of flame. General guidance
BS ISO 14835-2:2005 Mechanical vibration and shock. Cold provocation tests for the assessment of peripheral vascular function Measurement and evaluation of finger systolic blood pressure
09/30210300 DC : 0 BS EN 60086-5 ED3 - PRIMARY BATTERIES - PART 5: SAFETY OF BATTERIES WITH AQUEOUS ELECTROLYTE
PD ISO/IEC GUIDE 37:2012 Instructions for use of products by consumers
ISO 21789:2009 Gas turbine applications — Safety
BS EN 61960-1:2001 Secondary lithium cells and batteries for portable applications Secondary lithium cells
17/30341100 DC : 0 BS ISO 18758-2 - MINING AND EARTH-MOVING MACHINERY - ROCK DRILL RIGS AND ROCK REINFORCEMENT RIGS - PART 2: SAFETY REQUIREMENTS
ISO 3864-2:2016 Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels
BS EN 60086-5:2016 Primary batteries Safety of batteries with aqueous electrolyte
CEI EN 60695-11-3 : 2013 FIRE HAZARD TESTING - PART 11-3: TEST FLAMES - 500 W FLAMES - APPARATUS AND CONFIRMATIONAL TEST METHODS
CEI EN 60695-11-5 : 2006 FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
07/30169693 DC : 0 BS EN 60695-11-11 - FIRE HAZARD TESTING - PART 11-11: TEST FLAMES - DETERMINATION OF THE IGNITION CHARACTERISTIC HEAT FLUX FROM A NON-CONTACTING FLAME SOURCE
05/30143452 DC : DRAFT DEC 2005 IEC 61508-1 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY - PART 1: GENERAL REQUIREMENTS
13/30278416 DC : 0 BS EN 61800-5-2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL
BS ISO 9244 : 2008 EARTH-MOVING MACHINERY - MACHINE SAFETY LABELS - GENERAL PRINCIPLES
BS EN 61318:2008 Live working. Conformity assessment applicable to tools, devices and equipment
BS IEC 61513:2011 Nuclear power plants. Instrumentation and control important to safety. General requirements for systems
07/30169691 DC : 0 BS EN 60695-2-13 - FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITABILITY (GWIT) TEST METHOD FOR MATERIALS
DIN ISO 13022 E : 2014 MEDICAL PRODUCTS CONTAINING VIABLE HUMAN CELLS - APPLICATION OF RISK MANAGEMENT AND REQUIREMENTS FOR PROCESSING PRACTICES (ISO 13022:2012)
BS ISO 11228-2:2007 Ergonomics. Manual handling Pushing and pulling
PD ISO GUIDE 73:2009 Risk management. Vocabulary
S.R. CWA 16649:2013 MANAGING EMERGING TECHNOLOGY-RELATED RISKS
12/30269739 DC : 0 IEC 61010-2-101 ED 2 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-101: PARTICULAR REQUIREMENTS FOR LABORATORY EQUIPMENT FOR IN VITRO DIAGNOSTIC (IVD) MEDICAL EQUIPMENT
CEI EN 62620 : 2016 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NONACID ELECTROLYTES - SECONDARY LITHIUM CELLS AND BATTERIES FOR USE IN INDUSTRIAL APPLICATIONS
DD ISO/TS 25238:2007 Health informatics. Classification of safety risks from health software
API 599 : 2013 METAL PLUG VALVES - FLANGED, THREADED, AND WELDING ENDS
CEI EN 61326-3-2 : 2011 ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-2: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - INDUSTRIAL APPLICATIONS WITH SPECIFIED ELECTROMAGNETIC ENVIRONMENT
14/30287753 DC : 0 BS EN 62304 AMENDMENT 1 - MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE CYCLE PROCESSES
BS ISO 14835-1:2016 Mechanical vibration and shock. Cold provocation tests for the assessment of peripheral vascular function Measurement and evaluation of finger skin temperature
07/30174313 DC : 0 BS EN 60445 - BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - IDENTIFICATION OF EQUIPMENT TERMINALS, CONDUCTOR TERMINATIONS AND CONDUCTORS
BS ISO 15378 : 2006 AMD 17315 PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2000, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP)
ISO/IEC TR 14762:2001 Information technology Home Control Systems Guidelines for functional safety
14/30296544 DC : 0 BS ISO/IEC GUIDE 50 - SAFETY ASPECTS - GUIDELINES FOR CHILD SAFETY IN STANDARDS AND OTHER SPECIFICATIONS
11/30249994 DC : DRAFT JULY 2011 BS 7430 - CODE OF PRACTICE FOR PROTECTIVE EARTHING OF ELECTRICAL INSTALLATIONS
15/30292707 DC : 0 BS ISO 19202-2 - SUMMER TOBOGGAN RUNS - PART 2: SAFETY REQUIREMENTS FOR OPERATION
PD IEC 61955:2000 Primary batteries. Summary of research and actions limiting risks to reversed installation of primary batteries
ISO/TS 8103-6:2017 Escalators and moving walks — Part 6: Safety parameters meeting the GESRs
12/30273535 DC : 0 IEC 60695-2-11 ED 2.0 - FIRE HAZARD TESTING - PART 2-11: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY TEST METHOD FOR END PRODUCTS
BS EN ISO 4007:2012 Personal protective equipment. Eye and face protection. Vocabulary
BS EN 61511-1 : 2017 FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND APPLICATION PROGRAMMING REQUIREMENTS (IEC 61511-1:2016 + COR1:2016)
PD IEC TR 60825-14:2004 Safety of laser products A user\'s guide
09/30183765 DC : 0 BS EN 60695-6-1 A1 ED.2 - FIRE HAZARD TESTING - PART 6-1: SOME OBSCURATION - GENERAL GUIDANCE
CSA ISO 22559-1 : 2016 SAFETY REQUIREMENTS FOR LIFTS (ELEVATORS) - PART 1: GLOBAL ESSENTIAL SAFETY REQUIREMENTS (GESRS)
UNI ISO 14835-2 : 2010 MECHANICAL VIBRATION AND SHOCK - COLD PROVOCATION TESTS FOR THE ASSESSMENT OF PERIPHERAL VASCULAR FUNCTION - PART 2: MEASUREMENT AND EVALUATION OF FINGER SYSTOLIC BLOOD PRESSURE
UNI EN ISO 10821 : 2010 INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS
PD IEC/TS 62735-1:2015 Direct current (DC) plugs and socket-outlets for information and communication technology (ICT) equipment installed in data centres and telecom central offices Plug and socket-outlet system for 2,6 kW
EN 82304-1:2017 Health Software - Part 1: General requirements for product safety
AAMI TIR32 : 2004 : R2016 MEDICAL DEVICE SOFTWARE RISK MANAGEMENT
04/30110485 DC : DRAFT MARCH 2004 ISO 14835-2 - MECHANICAL VIBRATION AND SHOCK - COLD PROVOCATION TESTS FOR THE ASSESSMENT OF PERIPHERAL VASCULAR FUNCTION - PART 2 - MEASUREMENT AND EVALUATION OF FINGER SYSTOLIC BLOOD PRESSURE
95/208054 DC : DRAFT JUNE 1995 IEC 61508-2 - FUNCTIONAL SAFETY - SAFETY RELATED SYSTEMS - PART 2: REQUIREMENTS FOR ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SYSTEMS
PD ISO/TR 25743:2010 Lifts (elevators). Study of the use of lifts for evacuation during an emergency
ISO/IEC Guide 14:2018 Products and related services — Information for consumers
BS IEC 61508-4 : 98 AMD 13782 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - DEFINITIONS AND ABBREVIATIONS
04/30114881 DC : 0 IEC 61326-3 ED1 - ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE. EMC REQUIREMENTS - PART 3: IMMUNITY REQUIREMENTS FOR EQUIPMENT PERFORMING OR INTENDED TO PERFORM SAFETY RELATED FUNCTIONS (FUNCTIONAL SAFETY) IN INDUSTRIAL APPLICATIONS
RIA ISO 10218-1 : 2007 ROBOTS FOR INDUSTRIAL ENVIRONMENT - SAFETY REQUIREMENTS - PART 1: ROBOT
BS EN 60695-2-12 : 2010 FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS
CEI EN 61784-3-6 : 2012 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-6: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 6
BS EN 61784-3-8:2010 Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 8
03/103026 DC : DRAFT JAN 2003 BS EN ISO 5840 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES
PD CEN/TR 16467:2013 Playground equipment accessible for all children
BS EN 61784-3:2010 Industrial communication networks. Profiles Functional safety fieldbuses. General rules and profile definitions
AAMI ISO 14117 : 2012 ACTIVE IMPLANTABLE MEDICAL DEVICES - ELECTROMAGNETIC COMPATIBILITY - EMC TEST PROTOCOLS FOR IMPLANTABLE CARDIAC PACEMAKERS, IMPLANTABLE CARDIOVERTER DEFIBRILLATORS AND CARDIAC RESYNCHRONIZATION DEVICES
AAMI ISO 5840 : 2005 : R2010 CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES
I.S. EN 61508-2:2010 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 2: REQUIREMENTS FOR ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS
ISO/TR 18786:2014 Health and safety in welding Guidelines for risk assessment of welding fabrication activities
ANSI/AAMI/ISO 16142-2:2017 MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 2: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS
CEI EN 60695-2-11 : 2014 FIRE HAZARD TESTING - PART 2-11: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY TEST METHOD FOR END-PRODUCTS (GWEPT)
07/30157023 DC : 0 BS EN ISO 15194 - IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION
BS EN 61784-3-1:2010 Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 1
16/30302520 DC : 0 BS ISO 19611 - TRADITIONAL CHINESE MEDICINE - AIR EXHAUST CUPPING APPARATUS FOR MEDICAL USE
CEI EN 60695-4 : 2013 FIRE HAZARD TESTING - PART 4: TERMINOLOGY CONCERNING FIRE TESTS FOR ELECTROTECHNICAL PRODUCTS
BS IEC 61508-3 : 1998 AMD 13781 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - SOFTWARE REQUIREMENTS
ANSI/AAMI/ISO 13022:2012 MEDICAL PRODUCTS CONTAINING VIABLE HUMAN CELLS - APPLICATION OF RISK MANAGEMENT AND REQUIREMENTS FOR PROCESSING PRACTICES
AAMI ISO 5840 :2005 CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES
PD ISO/TR 16142:2006 Medical devices. Guidance on the selection of standards in support of recognized essential principles of safety and performance of medical devices
09/30205350 DC : 0 BS EN 60695-7-2 ED.1 - FIRE HAZARD TESTING - PART 7-2: TOXICITY OF FIRE EFFLUENT - SUMMARY AND RELEVANCE OF TEST METHODS
CEI EN 61508-1 : 2011 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 1: GENERAL REQUIREMENTS
CSA ISO/IEC 16085 : 2007 : R2012 SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE PROCESSES - RISK MANAGEMENT
BS ISO 15188:2001 Project management guidelines for terminology standardization
I.S. CEN GUIDE 12:2006 CHILD SAFETY GUIDANCE FOR ITS INCLUSION IN STANDARDS
ANSI/ISO 12100-1 : 2007 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
BS PAS 84(2008) : 2008 REGENERATIVE MEDICINE - GLOSSARY
CSA C22.2 No. 0.8:2012 SAFETY FUNCTIONS INCORPORATING ELECTRONIC TECHNOLOGY
IEC TR 62154:2005 Terminology in the area of information structures, documentation and graphical symbols
S.R. CEN ISO/TR 22100-1:2017 SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 1: HOW ISO 12100 RELATES TO TYPE-B AND TYPE-C STANDARDS (ISO/TR 22100-1:2015)
PD CEN/TR 13387-1:2015 Child use and care articles. General safety guidelines Safety philosophy and safety assessment
BS EN 61810-1:2015 Electromechanical elementary relays General and safety requirements
I.S. EN 61511-1:2017 FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - NORMATIVE (UON) - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND SOFTWARE REQUIREMENTS
CSA C22.2 No. 61010.1 :2012 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
ISO/TR 80002-2:2017 Medical device software — Part 2: Validation of software for medical device quality systems
ISO/IEC Guide 7:1994 Guidelines for drafting of standards suitable for use for conformity assessment
ISO/TS 19930:2017 Guidance on aspects of a risk-based approach to assuring sterility of terminally sterilized, single-use health care product that is unable to withstand processing to achieve maximally a sterility assurance level of 10-6
IEC 61800-5-2:2016 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
I.S. EN 61784-3:2016 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3: FUNCTIONAL SAFETY FIELDBUSES - GENERAL RULES AND PROFILE DEFINITIONS
ISO 14835-2:2005 Mechanical vibration and shock — Cold provocation tests for the assessment of peripheral vascular function — Part 2: Measurement and evaluation of finger systolic blood pressure
BS EN 61243-3:2014 Live working. Voltage detectors Two-pole low-voltage type
CSA C22.2 No. 61010.1 : 2012 : FR SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
ISO 13879:1999 Petroleum and natural gas industries — Content and drafting of a functional specification
BS EN 62271-200:2012 High-voltage switchgear and controlgear AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
EN 60601-1-10:2008/A1:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS (IEC 60601-1-10:2007)
I.S. EN 61821:2011 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - MAINTENANCE OF AERONAUTICAL GROUND LIGHTING CONSTANT CURRENT SERIES CIRCUITS (IEC 61821:2011)
I.S. EN 61000-1-2:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 1-2: GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC SYSTEMS INCLUDING EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA
IEC 61511-1 REDLINE : 2ED 2016 FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND APPLICATION PROGRAMMING REQUIREMENTS
I.S. EN 61508-3:2010 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 3: SOFTWARE REQUIREMENTS
UNI ISO 11228-3 : 2009 ERGONOMICS - MANUAL HANDLING - PART 3: HANDLING OF LOW LOADS AT HIGH FREQUENCY
AAMI/ISO TIR 80002-2:2017 MEDICAL DEVICE SOFTWARE - PART 2: VALIDATION OF SOFTWARE FOR MEDICAL DEVICE QUALITY SYSTEMS
I.S. EN 13060:2014 SMALL STEAM STERILIZERS
I.S. EN 62282-3-1:2007 FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
CEI EN 60695-1-10 : 2012 FIRE HAZARD TESTING - PART 1-10: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - GENERAL GUIDELINES
EN 61784-3:2016/A1:2017 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3: FUNCTIONAL SAFETY FIELDBUSES - GENERAL RULES AND PROFILE DEFINITIONS (IEC 61784-3:2016/A1:2017)
BS EN 60695-6-1 : 2005 FIRE HAZARD TESTING - PART 6-1: SMOKE OBSCURATION - GENERAL GUIDANCE
AAMI ISO TIR 17137 : 2014 CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - CARDIOVASCULAR ABSORBABLE IMPLANTS
I.S. EN 62271-202:2014 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION
I.S. EN 60695-4:2012 FIRE HAZARD TESTING - PART 4: TERMINOLOGY CONCERNING FIRE TESTS FOR ELECTROTECHNICAL PRODUCTS (IEC 60695-4:2012 (EQV))
CSA C22.2 No. 0.8 : 2012( R2016) SAFETY FUNCTIONS INCORPORATING ELECTRONIC TECHNOLOGY
BS EN 13611:2015 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
ISO 11014:2009 Safety data sheet for chemical products Content and order of sections
BS EN 61010-031:2015 Safety requirements for electrical equipment for measurement, control and laboratory use Safety requirements for hand-held probe assemblies for electrical measurement and test
ISO 19202-2:2017 Summer toboggan runs — Part 2: Safety requirements for operation
BIS IS/IEC 60479-3 : 1998 EFFECTS OF CURRENT ON HUMAN BEINGS AND LIVESTOCK - PART 3: EFFECTS OF CURRENTS PASSING THROUGH THE BODY OF LIVESTOCK
I.S. EN 60664-3:2017 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 3: USE OF COATING, POTTING OR MOULDING FOR PROTECTION AGAINST POLLUTION
IEC TR 60825-9:1999 Safety of laser products - Part 9: Compilation of maximum permissible exposure to incoherent optical radiation
I.S. EN 60695-10-3:2016 FIRE HAZARD TESTING - PART 10-3: ABNORMAL HEAT - MOULD STRESS RELIEF DISTORTION TEST
CEN/CLC Guide 32:2016 Guide for addressing climate change adaptation in standards
I.S. EN 60695-11-2:2017 FIRE HAZARD TESTING - PART 11-2: TEST FLAMES - 1 KW NOMINAL PRE-MIXED FLAME - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
PD IEC/TS 60479-2:2017 Effects of current on human beings and livestock Special aspects
GOST ISO 14698-2 : 2005 CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 2: EVALUATION AND INTERPRETATION OF BIOCONTAMINATION DATA
CEI EN 62271-201 : 2015 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 201: AC SOLID-INSULATION ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV
ISO/TS 11931:2012 Nanotechnologies — Nanoscale calcium carbonate in powder form — Characteristics and measurement
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 : 2015 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 62133 : 2017 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR PORTABLE SEALED SECONDARY CELLS, AND FOR BATTERIES MADE FROM THEM, FOR USE IN PORTABLE APPLICATIONS
CEI EN 60695-7-1 : 2013 FIRE HAZARD TESTING - PART 7-1: TOXICITY OF FIRE EFFLUENT - GENERAL GUIDANCE
NF EN 61010-1 : 2011 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
BS EN 62079:2001 Preparation of instructions. Structuring, content and presentation
I.S. EN 60695-7-3:2011 FIRE HAZARD TESTING - PART 7-3: TOXICITY OF FIRE EFFLUENT - USE AND INTERPRETATION OF TEST RESULTS (IEC 60695-7-3:2011)
NF EN 61140 : 2016 PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT
I.S. EN 60695-7-2:2011 FIRE HAZARD TESTING - PART 7-2: TOXICITY OF FIRE EFFLUENT - SUMMARY AND RELEVANCE OF TEST METHODS (IEC 60695-7-2:2011)
ISO 37100:2016 Sustainable cities and communities — Vocabulary
NF EN 61508-1 : 2011 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 1: GENERAL REQUIREMENTS
UNE-EN ISO 18113-1:2012 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009)
UNE-EN 61508-4:2011 Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 4: Definitions and abbreviations
IEC 61326-3-1 : 2.0 ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-1: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - GENERAL INDUSTRIAL APPLICATIONS
CEI EN 60695-10-2 : 2015 FIRE HAZARD TESTING - PART 10-2: ABNORMAL HEAT - BALL PRESSURE TEST METHOD
EN IEC 62928:2018 Railway applications - Rolling stock - Onboard lithium-ion traction batteries
I.S. EN 60695-1-11:2015 FIRE HAZARD TESTING - PART 1-11: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - FIRE HAZARD ASSESSMENT
CEN/CENELEC GUIDE 14 : 2009 CHILD SAFETY - GUIDANCE FOR ITS INCLUSION IN STANDARDS
EN 16991:2018 Risk-based inspection framework
CSA C22.2 No. 60601-1-10 : 2009 : R2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS
AAMI ISO 14971 : 2007 : INC : ERR 1 : 2007 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
NF EN 61326-3-2 : 2008 ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-2: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - INDUSTRIAL APPLICATIONS WITH SPECIFIED ELECTROMAGNETIC ENVIRONMENT
EN 62133-2:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications - Part 2: Lithium systems
CENELEC GUIDE 32 : 2014 GUIDELINES FOR SAFETY RELATED RISK ASSESSMENT AND RISK REDUCTION FOR LOW VOLTAGE EQUIPMENT
EN 61936-1 : 2010 AMD 1 2014 POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES (IEC 61936-1:2010/A1:2014)
NF EN 60695-2-13 : 2011 AMD 1 2014 FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS
CLC/TR 62685 : 2011 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - ASSESSMENT GUIDELINE FOR SAFETY DEVICES USING IEC 61784-3 FUNCTIONAL SAFETY COMMUNICATION PROFILES (FSCPS) (IEC/TR 62685:2010)
EN 61318:2008 Live working - Conformity assessment applicable to tools, devices and equipment
ISO 10377:2013 Consumer product safety — Guidelines for suppliers
EN 60695-6-1:2005/A1:2010 FIRE HAZARD TESTING - PART 6-1: SMOKE OBSCURATION - GENERAL GUIDANCE
IEC 61784-3-12:2010 Industrial communication networks - Profiles - Part 3-12: Functional safety fieldbuses - Additional specifications for CPF 12
IEC TS 60695-1-20:2008 Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance
ANSI/AAMI/IEC TIR62354:2015 GENERAL TESTING PROCEDURES FOR MEDICAL ELECTRICAL EQUIPMENT
IEC 61936-1:2010+AMD1:2014 CSV Power installations exceeding 1 kV a.c. - Part 1: Common rules
IEC TS 60695-1-14:2017 Fire hazard testing - Part 1-14: Guidance on the different levels of power and energy related to the probability of ignition and fire in low voltage electrotechnical products
I.S. EN 62281:2017 SAFETY OF PRIMARY AND SECONDARY LITHIUM CELLS AND BATTERIES DURING TRANSPORT
EN 61010-1:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
AAMI ES60601-1 : 2005 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
I.S. EN ISO 14971:2012 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007, CORRECTED VERSION 2007-10-01)
I.S. EN 60695-9-2:2014 FIRE HAZARD TESTING - PART 9-2: SURFACE SPREAD OF FLAME - SUMMARY AND RELEVANCE OF TEST METHODS
DIN EN 14459:2016-02 Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Methods for classification and assessment
DIN EN 15233:2007-11 Methodology for functional safety assessment of protective systems for potentially explosive atmospheres
IEC 60664-3:2016 RLV Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
DIN EN ISO 14971:2013-04 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007)
DIN EN 15198 E : 2007 METHODOLOGY FOR THE RISK ASSESSMENT OF NON-ELECTRICAL EQUIPMENT AND COMPONENTS FOR INTENDED USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
15/30297998 DC : 0 BS EN 62271-212 ED 1.0 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 212: COMPACT EQUIPMENT ASSEMBLY FOR DISTRIBUTION SUBSTATION (CEADS)
IEC 60695-8-1:2016 Fire hazard testing - Part 8-1: Heat release - General guidance
IEC 61318:2007 Live working - Conformity assessment applicable to tools, devices and equipment
UNE-EN 62271-200:2012 High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
BS EN 15233:2007 Methodology for functional safety assessment of protective systems for potentially explosive atmospheres
BS EN 1441:1998 Medical devices. Risk analysis
IEC 60695-7-2:2011 Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods
PD IEC/TR 60695-1-21:2008 Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Ignitability. Summary and relevance of test methods
BS EN ISO 14698-1:2003 Cleanrooms and associated controlled environments. Biocontamination control General principles and methods
IEC 61511-1:2016 RLV Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements
I.S. EN 13138-2:2014 BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE HELD
I.S. EN ISO 17776:2016 PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - MAJOR ACCIDENT HAZARD MANAGEMENT DURING THE DESIGN OF NEW INSTALLATIONS (ISO 17776:2016)
DIN EN 13611:2019-06 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
I.S. EN ISO 14031:2013 ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL PERFORMANCE EVALUATION - GUIDELINES (ISO 14031:2013)
I.S. EN 14459:2015 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - CONTROL FUNCTIONS IN ELECTRONIC SYSTEMS - METHODS FOR CLASSIFICATION AND ASSESSMENT
S.R. CR 13455:1999 SOIL IMPROVERS AND GROWING MEDIA - GUIDELINES FOR THE SAFETY OF USERS, THE ENVIRONMENT AND PLANTS
DIN EN ISO 10821:2013-02 INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS (ISO 10821:2005 + AMD 1:2009)
I.S. EN ISO 13702:2015 PETROLEUM AND NATURAL GAS INDUSTRIES - CONTROL AND MITIGATION OF FIRES AND EXPLOSIONS ON OFFSHORE PRODUCTION INSTALLATIONS - REQUIREMENTS AND GUIDELINES (ISO 13702:2015)
I.S. EN ISO 14630:2012 NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS (ISO 14630:2012)
I.S. EN ISO 14698-1:2003 CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 1: GENERAL PRINCIPLES AND METHODS
UNI EN 764-7 : 2004 PRESSURE EQUIPMENT - SAFETY SYSTEMS FOR UNFIRED PRESSURE EQUIPMENT
NBR IEC 60695-2-10 : 2015 FIRE HAZARD TESTING - PART 2-10: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE
NF EN 60446 : 1999 BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - IDENTIFICATION OF CONDUCTORS BY COLORS OR NUMERALS
NBR IEC 60695-2-12 : 2013 FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS
NBR IEC 60695-2-11 : 2016 ERRATA 1 2016 FIRE HAZARD TESTING - PART 2-11: GLOWING/HOT-WIRE TEST METHODS - GLOW-WIRE FLAMMABILITY TEST METHOD FOR END-PRODUCTS (GWEPT)
OVE/ONORM EN 60695-9-2 : 2015 FIRE HAZARD TESTING - PART 9-2: SURFACE SPREAD OF FLAME - SUMMARY AND RELEVANCE OF TEST METHODS (IEC 60695-9-2:2014)
CEI EN 60695-7-2 : 2013 FIRE HAZARD TESTING - PART 7-2: TOXICITY OF FIRE EFFLUENT - SUMMARY AND RELEVANCE OF TEST METHODS
ASME A17.7 : 2007 : R2012 PERFORMANCE-BASED SAFETY CODE FOR ELEVATORS AND ESCALATORS
NBR IEC 60695-2-13 : 2013 FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS
BS 0-2:1997 A standard for standards Recommendations for committee procedures
BS PAS 100(2005) : 2005 SPECIFICATION FOR COMPOSTED MATERIALS
VDE V 0140-479-3 : 2001 EFFECTS OF CURRENT ON HUMAN BEINGS AND LIVESTOCK - PART 3: EFFECTS OF CURRENTS PASSING THROUGH THE BODY OF LIVESTOCK
ANSI C81.64:2005 (R2014) American National Standard—Guidelines and General Information for Electrical Lamp Bases, Lampholders and Gauges
OVE/ONORM EN 60695-2-11 : 2014 FIRE HAZARD TESTING - PART 2-11: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY TEST METHOD FOR END-PRODUCTS (GWEPT) (IEC 60695-2-11:2014)
PD 6532-2:2000 Reference materials. Guide to the contents of certificates of reference materials Guide to the contents of certificates and labels of reference materials
ASME A17.7 : 2007 PERFORMANCE-BASED SAFETY CODE FOR ELEVATORS AND ESCALATORS
UNE-EN 16704-1:2017 Railway applications - Track - Safety protection on the track during work - Part 1: Railway risks and common principles for protection of fixed and mobile work sites
CSA ISO 14031 : 2014 ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL PERFORMANCE EVALUATION - GUIDELINES
08/30193508 DC : DRAFT NOV 2008 BS EN 61508-1 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 1: GENERAL REQUIREMENTS
BS ISO 15198:2004 Clinical laboratory medicine. In vitro diagnostic medical devices. Validation of user quality control procedures by the manufacturer
I.S. EN 62133-1:2017 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR PORTABLE SEALED SECONDARY CELLS, AND FOR BATTERIES MADE FROM THEM, FOR USE IN PORTABLE APPLICATIONS - PART 1: NICKEL SYSTEMS
I.S. EN 61508-4:2010 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 4: DEFINITIONS AND ABBREVIATIONS
EN 60664-3:2017 Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
17/30347375 DC : 0 BS EN 62368-1 ED 3.0 - AUDIO/VIDEO; INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
12/30239877 DC : 0 BS EN 60065 ED 8.0 - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
ISO/IEC Guide 37:2012 Instructions for use of products by consumers
I.S. EN ISO 14798:2013 LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - RISK ASSESSMENT AND REDUCTION METHODOLOGY (ISO 14798:2009)
CEI EN 61508-4 : 2011 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY RELATEDSYSTEMS - PART 4: DEFINITIONS AND ABBREVIATIONS
17/30348152 DC : 0 BS EN ISO 22300 - SECURITY AND RESILIENCE - TERMINOLOGY
BS ISO 16142-2:2017 Medical devices. Recognized essential principles of safety and performance of medical devices General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards
BS EN 60695-11-4:2011 Fire hazard testing Test flames. 50 W flame. Apparatus and confirmational test method
BS EN 62133-2:2017 Secondary cells and batteries containing alkaline or other non-acidelectrolytes. Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications Lithium systems
13/30293679 DC : 0 BS EN 62619 - SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR SECONDARY LITHIUM CELLS AND BATTERIES, FOR USE IN INDUSTRIAL APPLICATIONS
PD 6573:1994 Fundamental aspects of safety standards for medical electrical equipment
I.S. EN 60695-11-5:2017 FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
EN 50657:2017 Railways Applications - Rolling stock applications - Software on Board Rolling Stock
NF ISO 15188 : 2001 PROJECT MANAGEMENT GUIDELINES FOR TERMINOLOGY STANDARDIZATION
BS ISO 11074:2005 Soil quality. Vocabulary
UNE-EN 60695-1-30:2017 Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines
ANSI/AAMI/IEC TIR62348:2012 ASSESSMENT OF THE IMPACT OF THE MOST SIGNIFICANT CHANGES IN AMENDMENT 1 TO IEC 60601-1:2005 AND MAPPING OF THE CLAUSES OF IEC 60601-1:2005 TO THE PREVIOUS EDITION
17/30357747 DC : DRAFT AUG 2017 BS EN ISO 4007 - PERSONAL PROTECTIVE EQUIPMENT - EYE AND FACE PROTECTION - VOCABULARY
ISO/TR 16142:2006 Medical devices Guidance on the selection of standards in support of recognized essential principles of safety and performance of medical devices
12/30264755 DC : 0 BS ISO 22559-1 - SAFETY REQUIREMENTS FOR LIFTS (ELEVATORS) - PART 1: GLOBAL ESSENTIAL SAFETY REQUIREMENTS (GESRS)
ISO 11228-1:2003 Ergonomics Manual handling Part 1: Lifting and carrying
I.S. EN 60446:2007 BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - IDENTIFICATION OF CONDUCTORS BY COLOURS OR ALPHANUMERICS
I.S. EN 1050:1997 SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
ISO 5910:2018 Cardiovascular implants and extracorporeal systems Cardiac valve repair devices
UNE-ISO 9244:2010 Earth-moving machinery -- Machine safety labels -- General principles
BS EN 82304-1:2017 Health Software General requirements for product safety
NF EN 61508-4 : 2011 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 4: DEFINITIONS AND ABBREVIATIONS
PD CEN/TR 15809:2008 Characterization of sludges. Hygienic aspects. Treatments
08/30178045 DC : DRAFT FEB 2008 BS EN 61821 - ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - MAINTENANCE OF AERONAUTICAL GROUND LIGHTING CONSTANT CURRENT SERIES CIRCUITS
ISO 7475:2002 Mechanical vibration Balancing machines Enclosures and other protective measures for the measuring station
BS EN 50657:2017 Railways Applications. Rolling stock applications. Software on Board Rolling Stock
BS ISO 37100:2016 Sustainable cities and communities. Vocabulary
DIN EN ISO 10218-1:2012-01 Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robots (ISO 10218-1:2011)
12/30187831 DC : 0 BS EN 50126-1 - RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 1: GENERIC RAMS PROCESS
05/19982359 DC : DRAFT MAR 2005 BS ISO 11228-2 - ERGONOMICS - MANUAL HANDLING - PART 2: PUSHING AND PULLING
14/30287765 DC : 0 BS EN 60695-1-20/ED 1.0 - FIRE HAZARD TESTING - PART 1-20: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - GENERAL GUIDANCE
BS EN 60695-1-20:2016 Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Ignitability. General guidance
BS EN 16310:2013 Engineering services. Terminology to describe engineering services for buildings, infrastructure and industrial facilities
BS IEC 61508-6 : 2000 AMD 13784 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 6: GUIDELINES ON THE APPLICATION OF IEC 61508-2 AND IEC 61508-3
ISO/TS 17518:2015 Medical laboratories — Reagents for staining biological material — Guidance for users
UNI EN ISO 10218-1 : 2012 ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 1: ROBOTS
DD ISO/TS 22559-1:2004 Safety requirements for lifts (elevators) Global safety requirements (GESR\'s) for lifts (elevators
UNI EN ISO 22300 : 2014 SOCIETAL SECURITY - TERMINOLOGY
09/30179094 DC : 0 BS ISO 26262-3 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 3: CONCEPT PHASE
DD IEC/TS 61000-1-2:2001 Electromagnetic compatibility (EMC). General Methodology for the achievement of the functional safety of electrical and electronic equipment with regard to electromagnetic phenomena
98/262288 DC : DRAFT JUN 1998 IEC 61508-4 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 4: DEFINITIONS AND ABBREVIATIONS
I.S. EN 62271-204:2011 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 204: RIGID GAS-INSULATED TRANSMISSION LINES FOR RATED VOLTAGE ABOVE 52 KV (IEC 62271-204:2011 (EQV))
BS EN 60695-1-11:2015 Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Fire hazard assessment
05/30127781 DC : DRAFT JAN 2005 IEC 60695-2-11 ED.2 - FIRE HAZARD TESTING - PART 2-11: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW WIRE FLAMMABILITY TEST METHODS FOR END PRODUCTS
BS EN ISO 11074:2015 Soil quality. Vocabulary
13/30281097 DC : 0 BS EN 60695-1-11 ED 2.0 - FIRE HAZARD TESTING - PART 1-11: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - FIRE HAZARD ASSESSMENT
CEI EN 61784-3-2 : 2012 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-2: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 2
UNE-EN 60695-10-3:2017 Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test
NF EN 60695-2-12 : 2011 AMD 1 2014 FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS
BS ISO 11228-3:2007 Ergonomics. Manual handling Handling of low loads at high frequency
07/30169689 DC : 0 BS EN 60695-1-10 - FIRE HAZARD TESTING - PART 1-10: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - GENERAL GUIDELINES
I.S. EN 61326-3-2:2008 ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-2: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - INDUSTRIAL APPLICATIONS WITH SPECIFIED ELECTROMAGNETIC ENVIRONMENT
CEI EN 61293 : 1997 MARKING ELECTRICAL EQUIPMENT WITH RATINGS RELATED TO ELECTRICAL SUPPLY - SAFETY REQUIREMENTS
ISO 4126-9:2008 Safety devices for protection against excessive pressure Part 9: Application and installation of safety devices excluding stand-alone bursting disc safety devices
10/30215731 DC : 0 BS ISO 21940-23 - MECHANICAL VIBRATION - ROTOR BALANCING - PART 23: BALANCING MACHINES - ENCLOSURES AND OTHER PROTECTIVE MEASURES FOR THE MEASURING STATION
BS EN 61784-3-12:2010 Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 12
08/30193511 DC : DRAFT NOV 2008 BS EN 61508-4 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 4: DEFINITIONS AND ABBREVIATIONS
PD ISO/TS 11937:2012 Nanotechnologies. Nanoscale titanium dioxide in powder form. Characteristics and measurement
14/30318350 DC : 0 BS EN 61326-3-1 ED. 2 - ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-1: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - GENERAL INDUSTRIAL APPLICATIONS
UNE-EN 62304:2007 Medical device software - Software life-cycle processes (IEC 62304:2006)
14/30298039 DC : 0 BS EN 61069-7 ED 2.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 7: ASSESSMENT OF SYSTEM SAFETY HAZARD
BS ISO 16142-1:2016 Medical devices. Recognized essential principles of safety and performance of medical devices General essential principles and additional specific essential principles for all non-IVD medical devices and guidance on the selection of standards
DIN EN 60446 : 2008 BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - IDENTIFICATION OF CONDUCTORS BY COLOURS OR ALPHANUMERICS
13/30294644 DC : 0 BS EN 62133-1 - SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR PORTABLE SEALED SECONDARY CELLS, AND FOR BATTERIES MADE FROM THEM, FOR USE IN PORTABLE APPLICATIONS - PART 1: NICKEL SYSTEMS
16/30295446 DC : 0 BS ISO 19223 - LUNG VENTILATORS AND RELATED EQUIPMENT - VOCABULARY AND SEMANTICS
BS EN 62366 : 2008 MEDICAL DEVICES - APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES
12/30230305 DC : 0 BS EN 60695-10-2 ED 3.0 - FIRE HAZARD TESTING - PART 10-2: ABNORMAL HEAT - BALL PRESSURE TEST
PD CEN/TR 15592:2007 Health services. Quality management systems. Guide for the use of EN ISO 9004:2000 in health services for performance improvement
CEI EN 61784-3-3 : 2012 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-3: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 3
IEC TR 63054:2017 Low-voltage switchgear and controlgear - Fire risk analysis and risk reduction measures
EN 62281:2017 Safety of primary and secondary lithium cells and batteries during transport
BS ISO 11228-1:2003 Ergonomics. Manual handling Lifting and carrying
S.R. CLC/GUIDE 32:2014 GUIDELINES FOR SAFETY RELATED RISK ASSESSMENT AND RISK REDUCTION FOR LOW VOLTAGE EQUIPMENT
CEI EN 60695-8-1 : 2009 FIRE HAZARD TESTING - PART 8-1: HEAT RELEASE - GENERAL GUIDANCE
I.S. EN 60695-8-2:2017 FIRE HAZARD TESTING - PART 8-2: HEAT RELEASE - SUMMARY AND RELEVANCE OF TEST METHODS
11/30247588 DC : DRAFT JULY 2011 BS EN 16310 - ENGINEERING CONSULTANCY SERVICES - TERMINOLOGY AT A HIGH LEVEL TO DESCRIBE THE ENGINEERING SERVICES IN CONSTRUCTION OF BUILDINGS, INFRASTRUCTURE AND INDUSTRIAL FACILITIES
09/30197747 DC : 0 BS ISO 10218-1 - ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS - PART 1: INDUSTRIAL ROBOT
15/30326894 DC : 0 BS EN 60086-5 ED 4.0 - PRIMARY BATTERIES - PART 5: SAFETY OF BATTERIES WITH AQUEOUS ELECTROLYTE
FD ISO/IEC GUIDE 71 : 2002 FD GUIDELINES FOR STANDARDS DEVELOPERS TO ADDRESS THE NEEDS OF OLDER PERSONS AND PERSONS WITH DISABILITIES
DIN EN ISO 14798:2013-04 LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - RISK ASSESSMENT AND REDUCTION METHODOLOGY (ISO 14798:2009)
UNI/TR 11542 : 2014 SAFETY - WORLD CLASS MANUFACTURING AND SAFETY INTEGRATION IN PRODUCTION PROCESSES - APPLICATION GUIDELINES
PD ISO/TR 80002-2:2017 Medical device software Validation of software for medical device quality systems
BS ISO 4126-9:2008 Safety devices for protection against excessive pressure Application and installation of safety devices excluding stand-alone bursting disc safety devices
UNE-EN 60695-7-1:2011 Fire hazard testing -- Part 7-1: Toxicity of fire effluent - General guidance
12/30269145 DC : 0 BS EN 60695-1-40 ED 1.0 - FIRE HAZARD TESTING - PART 1-40: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - INSULATING LIQUIDS
BS EN 62570:2015 Standard practice for marking medical devices and other items for safety in the magnetic resonance environment
04/30086456 DC : DRAFT APR 2004 BS ISO 11074 - SOIL QUALITY - VOCABULARY
UNE-EN 14459:2016 Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Methods for classification and assessment
PD CLC/TR 50126-2:2007 Railway applications. The specification and demonstration of reliability, availability, maintainability and safety (RAMS) Guide to the application of EN 50126-1 for safety
14/30289476 DC : 0 BS ISO/IEC 15026-3 - SYSTEMS AND SOFTWARE ENGINEERING - SYSTEMS AND SOFTWARE ASSURANCE - PART 3: SYSTEM INTEGRITY LEVELS
UNE-EN 60695-8-1:2017 Fire hazard testing - Part 8-1: Heat release - General guidance
AAMI IEC 62366 : 2015 MEDICAL DEVICES - APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES
BS IEC 61508-1 : 1998 AMD 13779 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - GENERAL REQUIREMENTS
CSA IEC 62366 : 2014 MEDICAL DEVICES - APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES
CEI 89-37 : 2014 FIRE HAZARD TESTING - PART 8-3: HEAT RELEASE - HEAT RELEASE OF INSULATING LIQUIDS USED IN ELECTROTECHNICAL PRODUCTS
08/30191891 DC : DRAFT OCT 2008 BS EN 61936-1 - POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES
BS ISO 21789:2009 Gas turbine applications — Safety
BS EN 60601-1-10 : 2008 MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS
05/30131803 DC : DRAFT APR 2005 EN 15198 - METHODOLOGY FOR THE IGNITION HAZARD ASSESSMENT OF NON-ELECTRICAL EQUIPMENT AND COMPONENTS FOR INTENDED USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
08/30193478 DC : DRAFT NOV 2008 BS EN 61508-7 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 7: OVERVIEW OF TECHNIQUES AND MEASURES
BIS IS/IEC 62271-200 : 2003 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 200: A.C. METAL-ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UPTO AND INCLUDING 52 KV
ISO/IEC TR 29108:2013 Information technology Terminology for intelligent homes
IEC GUIDE 116:2010 Guidelines for safety related risk assessment and risk reduction for low voltage equipment
04/30115151 DC : DRAFT JUNE 2004 ISO/IEC 16085 - SOFTWARE ENGINEERING - SOFTWARE LIFE CYCLE PROCESSES - RISK MANAGEMENT
CSA Z1002 : 2012 : INC : UPD 1 : 2013 OCCUPATIONAL HEALTH AND SAFETY - HAZARD IDENTIFICATION AND ELIMINATION AND RISK ASSESSMENT AND CONTROL
BS EN 60695-10-3:2016 Fire hazard testing Abnormal heat. Mould stress relief distortion test
I.S. CEN TS 15260:2006 HEALTH INFORMATICS - CLASSIFICATION OF SAFETY RISKS FROM HEALTH INFORMATICS PRODUCTS
CSA IEC/ISO 31010 : 2010 RISK MANAGEMENT - RISK ASSESSMENT TECHNIQUES
CSA Z431 : 2012 BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - CODING PRINCIPLES FOR INDICATORS AND ACTUATORS
CSA ISO/TS 14798 : 2007 LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - RISK ASSESSMENT AND REDUCTION METHODOLOGY
BS EN 61508-3:2010 Functional safety of electrical/electronic/ programmable electronic safety-related systems Software requirements
CSA IEC/ISO 31010 : 2010 : R2015 RISK MANAGEMENT - RISK ASSESSMENT TECHNIQUES
ISO Guide 78:2008 Safety of machinery Rules for drafting and presentation of safety standards
CSA ISO/IEC 16085 : 2007 : R2017 SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE PROCESSES - RISK MANAGEMENT
EN 61784-3-8:2017 Industrial communication networks - Profiles - Part 3-8: Functional safety fieldbuses - Additional specifications for CPF 8
BS EN ISO 11930:2012 Cosmetics. Microbiology. Evaluation of the antimicrobial protection of a cosmetic product
IEC 61784-3-3:2016 Industrial communication networks - Profiles - Part 3-3: Functional safety fieldbuses - Additional specifications for CPF 3
IEC 62928:2017 Railway applications - Rolling stock - Onboard lithium-ion traction batteries
UNE-EN 60695-10-2:2014 Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method
BS EN 16704-1:2016 Railway applications. Track. Safety protection on the track during work Railway risks and common principles for protection of fixed and mobile work sites
IEC 61784-3-18:2011+AMD1:2016 CSV Industrial communication networks - Profiles - Part 3-18: Functionalsafety fieldbuses - Additional specifications for CPF 18
IEC 60669-1:2017 RLV Switches for household and similar fixed-electrical installations - Part 1: General requirements
DIN ISO 13022:2014-06 MEDICAL PRODUCTS CONTAINING VIABLE HUMAN CELLS - APPLICATION OF RISK MANAGEMENT AND REQUIREMENTS FOR PROCESSING PRACTICES (ISO 13022:2012)
17/30360051 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
CEI CLC/TR 62685 : 2012 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - ASSESSMENT GUIDELINE FOR SAFETY DEVICES USING IEC 61784-3 FUNCTIONAL SAFETY COMMUNICATION PROFILES (FSCPS)
BS ISO 14117:2012 Active implantable medical devices. Electromagnetic compatibility. EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devices
AAMI IEC 62304 : 2006 MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE CYCLE PROCESSES
I.S. EN 50491-4-1:2012 GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 4-1: GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS)
IEC TR 63039:2016 Probabilistic risk analysis of technological systems - Estimation of final event rate at a given initial state
CSA C22.3 No. 61936-1 : 2008 : R2015 POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES
NF EN 61508-3 : 2011 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 3: SOFTWARE REQUIREMENTS
ISO 9244:2008 Earth-moving machinery Machine safety labels General principles
I.S. EN 62133:2013 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR PORTABLE SEALED SECONDARY CELLS, AND FOR BATTERIES MADE FROM THEM, FOR USE IN PORTABLE APPLICATIONS (IEC 62133:2012 (EQV))
BS EN 61784-3-18 : 2011 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-18: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 18 (IEC 61784-3-18:2011)
BS ISO/IEC 15026-3:2015 Systems and software engineering. Systems and software assurance System integrity levels
EN 60445:2017 Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
EN 13060:2014 Small steam sterilizers
BS EN 60335-1 : 2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
NF EN 60695-2-10 : 2013 FIRE HAZARD TESTING - PART 2-10: GLOWING/OUT-WIRE BASED TEST METHOD - GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE
EN 61326-3-1:2017 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications
I.S. EN 60695-10-2:2014 FIRE HAZARD TESTING - PART 10-2: ABNORMAL HEAT - BALL PRESSURE TEST METHOD
CEI EN 60990 : 2000 METHODS OF MEASUREMENT OF TOUCH CURRENT AND PROTECTIVE CONDUCTOR CURRENT
AAMI ISO 14708-5 : 2010 IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 5: CIRCULATORY SUPPORT DEVICES
CEI EN 61784-3-1 : 2012 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-1: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 1
I.S. EN 62619:2017 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR SECONDARY LITHIUM CELLS AND BATTERIES, FOR USE IN INDUSTRIAL APPLICATIONS
CSA ISO/IEC TR 14762 : 2004 INFORMATION TECHNOLOGY - HOME CONTROL SYSTEMS - GUIDELINES FOR FUNCTIONAL SAFETY
CSA C22.3 No. 61936-1 : 2008 POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES
ANSI/ASSE Z590.3 : 2011 PREVENTION THROUGH DESIGN GUIDELINES FOR ADDRESSING OCCUPATIONAL HAZARDS AND RISKS IN DESIGN AND REDESIGN PROCESSES
UNI EN ISO 14798 : 2013 LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - RISK ASSESSMENT AND REDUCTION METHODOLOGY
ISO 15190:2003 Medical laboratories Requirements for safety
ISO/TS 22559-1:2004 Safety requirements for lifts (elevators) Part 1: Global essential safety requirements (GESRs)
ISO/TS 20100:2008 Gaseous hydrogen Fuelling stations
S.R. CWA 15793:2011 LABORATORY BIORISK MANAGEMENT
I.S. CEN TR 13387:2004 CHILD USE AND CARE ARTICLES - SAFETY GUIDELINES
I.S. EN 61784-3-6:2010 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-6: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 6
I.S. EN 60695-1-40:2014 FIRE HAZARD TESTING - PART 1-40: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - INSULATING LIQUIDS
ANSI/ASSE Z690.3 : 2011 RISK ASSESSMENT TECHNIQUES
I.S. EN 61784-3-3:2017 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-3: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 3
CAN/CSA-C22.2 NO. 61511-1:17 Functional safety — Safety instrumented systems for the process industry sector — Part 1: Framework, definitions, system, hardware and application programming requirements (Adopted IEC 61511-1:2016, second edition, 2016-02, with Canadian deviations) | Sécurité fonctionnelle — Systèmes instrumentes de sécurité pour le secteur des industries de transformation — Partie 1 : Cadre, définitions, exigences pour le système, le matériel et la programmation d’application (norme IEC 61511-1:2016 adoptée, deuxième édition, 2016-02, avec exigences propres au Canada)
IEC TS 60695-8-3:2008 Fire hazard testing - Part 8-3: Heat release - Heat release of insulating liquids used in electrotechnical products
BIS IS 11000-1-40 : 2015 FIRE HAZARD TESTING - PART 1: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - SECTION 40: INSULATING LIQUIDS
UNI EN ISO 4007 : 2012 PERSONAL PROTECTIVE EQUIPMENT - EYE AND FACE PROTECTION - VOCABULARY
BS EN 62281:2017 Safety of primary and secondary lithium cells and batteries during transport
I.S. EN 60695-11-10:2013 FIRE HAZARD TESTING - PART 11-10: TEST FLAMES - 50 W HORIZONTAL AND VERTICAL FLAME TEST METHODS (IEC 60695-11-10:2013 (EQV))
CEI 89-29 : 2010 FIRE HAZARD TESTING - PART 1-20: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - GENERAL GUIDANCE
IEC TS 61201:2007 Use of conventional touch voltage limits - Application guide
CEN/TR 15640:2007 Health informatics - Measures for ensuring the patient safety of health software
I.S. EN 16704-1:2016 RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 1: RAILWAY RISKS AND COMMON PRINCIPLES FOR PROTECTION OF FIXED AND MOBILE WORK SITES
IEC GUIDE 104:2010 The preparation of safety publications and the use of basic safety publications and group safety publications
ISO 22559-1:2014 Safety requirements for lifts (elevators) Part 1: Global essential safety requirements (GESRs)
CEI EN 60695-10-3 : 2004 FIRE HAZARD TESTING - PART 10-3: ABNORMAL HEAT - MOULD STRESS RELIEF DISTORTION TEST
CEI EN 61508-2 : 2011 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 2: REQUIREMENTS FOR ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS
EN 62271-200:2012/AC:2015 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 200: AC METAL-ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV (IEC 62271-200:2011)
CAN/CSA-C22.2 NO. 61010-1-12 (R2017) Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements (Tri-national standard, with UL 61010-1 and ANSI/ISA-61010-1 (82.02.01)
UNI ISO 3534-2 : 2014 STATISTICS - VOCABULARY AND SYMBOLS - PART 2: APPLIED STATISTICS
CSA C22.2 No. 60601-1-10:2009 MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS
ASTM F 2503 : 2013 : REDLINE Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment
IEC 60669-1:2017 Switches for household and similar fixed-electrical installations - Part 1: General requirements
ISO/TS 12805:2011 Nanotechnologies Materials specifications Guidance on specifying nano-objects
ISO 19372:2015 Microturbines applications — Safety
ISO Guide 73:2009 Risk management — Vocabulary
ISO 16110-1:2007 Hydrogen generators using fuel processing technologies Part 1: Safety
IEC 61784-3-8:2016 Industrial communication networks - Profiles - Part 3-8: Functional safety fieldbuses - Additional specifications for CPF 8
ISO/IEC Guide 76:2008 Development of service standards Recommendations for addressing consumer issues
ISO 14971:2007 Medical devices Application of risk management to medical devices
ISO/TS 25740-1:2011 Safety requirements for escalators and moving walks — Part 1: Global essential safety requirements (GESR)
BS EN ISO 14971:2012 Medical devices. Application of risk management to medical devices
ISO/IEC Guide 73:2002 Risk management Vocabulary Guidelines for use in standards
IEC 61326-3-2:2017 RLV Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment
IEC TS 61000-1-2:2008 Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena
IEC 62368-1:2014 Audio/video, information and communication technology equipment - Part 1: Safety requirements
EN 61784-3-12:2010 Industrial communication networks - Profiles - Part 3-12: Functional safety fieldbuses - Additional specifications for CPF 12
IEC 62619:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications
S.R. CLC/TR 50126-2:2007 RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 2: GUIDE TO THE APPLICATION OF EN 50126-1 FOR SAFETY
IEC 60755:2017 General safety requirements for residual current operated protective devices
IEC GUIDE 118:2017 Inclusion of energy efficiency aspects in electrotechnical publications
IEC TR 62685:2010 Industrial communication networks - Profiles - Assessment guideline for safety devices using IEC 61784-3 functional safety communication profiles (FSCPs)
IEC TR 60695-8-2:2008 Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods
I.S. EN 62304:2006 MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE-CYCLE PROCESSES
I.S. EN 131-3:2018 LADDERS - PART 3: MARKING AND USER INSTRUCTIONS
IEC 61784-3 REDLINE : 3ED 2016 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3: FUNCTIONAL SAFETY FIELDBUSES - GENERAL RULES AND PROFILE DEFINITIONS
IEC 61960-2:2001 Secondary lithium cells and batteries for portable applications - Part 2: Secondary lithium batteries
IEC 60670-1:2015 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements
EN 60695-2-13:2010/A1:2014 FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS (IEC 60695-2-13:2010/A1:2014)
DIN EN ISO 14698-2 E : 2004 CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 2: EVALUATION AND INTERPRETATION OF BIOCONTAMINATION DATA
DIN EN 13060:2015-03 SMALL STEAM STERILIZERS
DIN EN 14459 E : 2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - CONTROL FUNCTIONS IN ELECTRONIC SYSTEMS - METHODS FOR CLASSIFICATION AND ASSESSMENT
BS EN 60695-1-21:2016 Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Ignitability. Summary and relevance of test methods
UNE-EN 62271-202:2015 High-voltage switchgear and controlgear - Part 202: High-voltage/low-voltage prefabricated substation
UNE-EN 60695-9-2:2014 Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods
BS EN ISO 12100-1 : 2003 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
IEC TS 60695-9-2:2005 Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods
IEC 60695-6-2:2011 Fire hazard testing - Part 6-2: Smoke obscuration - Summary and relevance of test methods
BS EN ISO 14698-2:2003 Cleanrooms and associated controlled environments. Biocontamination control Evaluation and interpretation of biocontamination data
IEC 60695-9-2:2014 Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods
IEC 61784-3-6:2010 Industrial communication networks - Profiles - Part 3-6: Functional safety fieldbuses - Additional specifications for CPF 6
IEC 60695-1-20:2016 Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance
ISO 5840:2005 Cardiovascular implants Cardiac valve prostheses
18/30375223 DC BS EN 60947-4-3. Low-voltage switchgear and controlgear Part 4-3. Contactors and motor-starters. Semiconductor controllers and semiconductor contactors for non-motor loads
IEC 60695-2-13:2010+AMD1:2014 CSV Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials
DIN EN 15233 E : 2007 METHODOLOGY FOR FUNCTIONAL SAFETY ASSESSMENT OF PROTECTIVE SYSTEMS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES
BS EN 414:2000 Safety of machinery. Rules for the drafting and presentation of safety standards
DIN EN 15198:2007-11 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
18/30359998 DC : 0 BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS
ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
IEC 61784-3:2016 RLV Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses - General rules and profile definitions
UNE-EN 13138-2:2015 Buoyant aids for swimming instruction - Part 2: Safety requirements and test methods for buoyant aids to be held
EN ISO 11074:2015 Soil quality - Vocabulary (ISO 11074:2015)
IEC 61810-1:2015 Electromechanical elementary relays - Part 1: General and safety requirements
04/30117451 DC : DRAFT JUL 2004 IEC 60086-4. ED.3 - PRIMARY BATTERIES - PART 4: SAFETY OF LITHIUM BATTERIES
04/30106146 DC : DRAFT MARCH 2004 BS EN 60601-1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
BS EN ISO 13702:2015 Petroleum and natural gas industries. Control and mitigation of fires and explosions on offshore production installations. Requirements and guidelines
EN ISO 14698-2:2003/AC:2006 CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 2: EVALUATION AND INTERPRETATION OF BIOCONTAMINATION DATA
CEI EN 60519-1 : 2016 SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS
UNE-EN 61010-1:2011 Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 1: General requirements
CSA B44.7 : 2007 : R2012 PERFORMANCE-BASED SAFETY CODE FOR ELEVATORS AND ESCALATORS
UNE-EN 60664-3:2004 Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
UNE 20315-1-1:2017 Plugs and sockets-outlets for household and similar purposes. Part 1-1: General requirements.
UNE-EN 60601-1:2008 Medical electrical equipment -- Part 1: General requirements for basic safety and essential performance
CSA C22.2 No. 60335-1:2011 SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 1: GENERAL REQUIREMENTS
ISA 61010-1 : 2008 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 272 : 2014 WIND TURBINE ELECTRICAL SYSTEMS
IEC 60445:2017 RLV Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
I.S. EN ISO 14698-2:2003 CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 2: EVALUATION AND INTERPRETATION OF BIOCONTAMINATION DATA
UNE-EN 60730-1:2013 Automatic electrical controls for household and similar use - Part 1: General requirements
ASME A17.7-2007/CSA B44.7-07 (R2017) Performance-Based Safety Code for Elevators and Escalators (Bi-National standard, with ASME A17.7)
UL 61010-031:2ED 2017-01 Standard for Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 031: Safety Requirements for Hand-Held and Hand-Manipulated Probe Assemblies for Electrical Test and Measurement
UNE-EN ISO 22300:2015 Societal security - Terminology (ISO 22300:2012)
CSA B44.7 : 2007 PERFORMANCE-BASED SAFETY CODE FOR ELEVATORS AND ESCALATORS
CAN/CSA-C22.2 NO. 60335-1:11 (R2016) Safety of household and similar appliances - Part 1: General requirements (Tri-national standard, with NMX-J-521/1-ANCE and UL 60335-1)
UL 60335-1:6ED 2016-10 Standard for Safety of Household and Similar Appliances, Part 1: General Requirements
EN ISO 14698-1 : 2003 CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 1: GENERAL PRINCIPLES AND METHODS
UNI EN ISO 12100-1 : 2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
UNI EN ISO 5840 : 2009 CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES
EN 60086-4:2015 Primary batteries - Part 4: Safety of lithium batteries
EN 60695-10-2:2014 Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method
UNI EN 1106 : 2010 MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES
UNI ISO 11228-2 : 2009 ERGONOMICS - MANUAL HANDLING - PART 2: PUSHING AND PULLING
EN 50532:2010 Compact Equipment Assembly for Distribution Substations (CEADS)
IEC 61513:2011 Nuclear power plants - Instrumentation and control important to safety - General requirements for systems
UNI EN 1854 : 2010 PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES
UNI EN ISO 14630 : 2013 NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS
EN 31010:2010 Risk management - Risk assessment techniques
CEI EN 61318 : 2008 LIVE WORKING - CONFORMITY ASSESSMENT APPLICABLE TO TOOLS, DEVICES AND EQUIPMENT
CEI EN 60447 : 2005 BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - ACTUATING PRINCIPLES
ISO/TS 14798:2006 Lifts (elevators), escalators and moving walks Risk assessment and reduction methodology
ISO 11228-2:2007 Ergonomics — Manual handling — Part 2: Pushing and pulling
12/30241112 DC : DRAFT JAN 2012 BS EN ISO 14031 - ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL PERFORMANCE EVALUATION - GUIDELINES
I.S. CWA 45546-1:2004 GUIDELINES TO STANDARDISERS OF COLLECTIVE TRANSPORT SYSTEMS - NEEDS OF OLDER PEOPLE AND PERSONS WITH DISABILITIES - PART 1: BASIC GUIDELINES
16/30337806 DC : 0 BS EN 16991 - RISK BASED INSPECTION FRAMEWORK (RBIF)
DIN ISO 21940-23:2012-09 Mechanical vibration - Rotor balancing - Part 23: Enclosures and other protective measures for the measuring station of balancing machines (ISO 21940-23:2012)
I.S. EN 61318:2008 LIVE WORKING - CONFORMITY ASSESSMENT APPLICABLE TO TOOLS, DEVICES AND EQUIPMENT
DIN EN 16704-1:2014-04 (Draft) RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 1: RAILWAY RISKS AND COMMON PRINCIPLES FOR PROTECTION OF FIXED AND MOBILE WORK SITES
14/30296914 DC : 0 BS ISO/IEC GUIDE 71 - GUIDE FOR ADDRESSING ACCESSIBILITY IN STANDARDS
IEC 60445 REDLINE : 6ED 2017 BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - IDENTIFICATION OF EQUIPMENT TERMINALS, CONDUCTOR TERMINATIONS AND CONDUCTORS
AAMI TIR36 : 2007 VALIDATION OF SOFTWARE FOR REGULATED PROCESSES
BS IEC 61511-1 : 2003 AMD 15776 FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND SOFTWARE REQUIREMENTS
14/30244508 DC : 0 BS EN 62366-1 - MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES
09/30206609 DC : 0 BS EN 60695-11-10 ED.2 - FIRE HAZARD TESTING - PART 11-10: TEST FLAMES - 50 W HORIZONTAL AND VERTICAL FLAME TEST METHODS
UNI CEN/TS 15277 : 2007 NON-ACTIVE SURGICAL IMPLANTS - INJECTABLE IMPLANTS
12/30253935 DC : DRAFT JUNE 2012 BS EN 62271-201 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - AC SOLID-INSULATED ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV
FD X50 252 : 2006 FD RISK MANAGEMENT - GUIDELINES FOR RISK ESTIMATION
BS EN 61508-2:2010 Functional safety of electrical/electronic/ programmable electronic safety-related systems Requirements for electrical/electronic/ programmable electronic safety-related systems
BS EN 62133-1:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications Nickel systems
05/30143460 DC : DRAFT DEC 2005 IEC 61508-3 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY - PART 3: SOFTWARE REQUIREMENTS
12/30239867 DC : 0 BS EN 62368-1 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
DIN EN ISO 15194:2009-10 IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION
CSA E62133 : 2013 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR PORTABLE SEALED SECONDARY CELLS, AND FOR BATTERIES MADE FROM THEM, FOR USE IN PORTABLE APPLICATIONS
06/30147232 DC : DRAFT OCT 2006 IEC 60601-1-10 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD - REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS
04/30117245 DC : DRAFT JUL 2004 BS ISO 3534-2 - STATISTICS - VOCABULARY AND SYMBOLS - PART 2: APPLIED STATISTICS
BS EN 61000-1-2:2016 Electromagnetic compatibility (EMC) General. Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena
UNE-EN 62282-3-1:2011 Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety
IEC 60664-3 REDLINE : 3ED 2016 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 3: USE OF COATING, POTTING OR MOULDING FOR PROTECTION AGAINST POLLUTION
PD CEN/TR 15584:2007 Characterisation of sludges. Guide to risk assessment especially in relation to use and disposal of sludges
08/30182164 DC : DRAFT MAY 2008 BS ISO 31000 - RISK MANAGEMENT - PRINCIPLES AND GUIDELINES ON IMPLEMENTATION
07/30165523 DC : 0 BS ISO 14798 - LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - RISK ASSESSMENT AND REDUCTION METHODOLOGY
UNE-EN 60695-1-40:2014 Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids
I.S. EN 60695-1-21:2016 FIRE HAZARD TESTING - PART 1-21: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - SUMMARY AND RELEVANCE OF TEST METHODS
12/30254414 DC : 0 BS EN 13138-2 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE HELD
12/30252157 DC : 0 BS ISO 10393 - CONSUMER PRODUCT RECALL - GUIDELINES
UNI ISO 11228-1 : 2009 ERGONOMICS - MANUAL HANDLING - PART 1: LIFTING AND CARRYING
PD ISO GUIDE 78:2012 Safety of machinery. Rules for drafting and presentation of safety standards
PREN 50126-1 : DRAFT 2015 RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 1: GENERIC RAMS PROCESS
UNI ISO 14798 : 2010 LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - RISK ASSESSMENT AND REDUCTION METHODOLOGY
CEI UNI EN ISO 14971 : 2013 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
BS ISO 13879:1999 Petroleum and natural gas industries. Content and drafting of functional specifications
PD CEN/TR 15640:2007 Health informatics. Measures for ensuring the patient safety of health software
PREN ISO 10218-1 : DRAFT 2009 ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS - PART 1: INDUSTRIAL ROBOT
99/706406 DC : DRAFT APR 1999 PREN 13445-6 - UNFIRED PRESSURE VESSELS - PART 6: SAFETY SYSTEMS
PD ISO/IEC GUIDE 50:2014 Safety aspects. Guidelines for child safety in standards and other specifications
I.S. EN 50532:2010 COMPACT EQUIPMENT ASSEMBLY FOR DISTRIBUTION SUBSTATIONS (CEADS)
BS ISO 17894:2005 Ships and marine technology. Computer applications. General principles for the development and use of programmable electronic systems in marine applications
BS EN 60445:2017 Basic and safety principles for man-machine interface, marking and identification. Identification of equipment terminals, conductor terminations and conductors
BS IEC 61508-5 : 98 AMD 13783 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - EXAMPLES OF METHODS FOR THE DETERMINATION OF SAFETY INTEGRITY LEVELS
ISO/IEC 15026-3:2015 Systems and software engineering — Systems and software assurance — Part 3: System integrity levels
13/30247136 DC : 0 BS EN ISO 11074 - SOIL QUALITY - VOCABULARY
I.S. EN 61010-1:2010/A1:2019 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
17/30370380 DC : 0 BS EN 62281 ED.4.0 - SAFETY OF PRIMARY AND SECONDARY LITHIUM CELLS AND BATTERIES DURING TRANSPORT
DD ISO/TS 14798:2006 Lifts (elevators), escalators and moving walks. Risk assessment and reduction methodology
PD 6519-3:1999 Guide to effects of current on human beings and livestock Effects of currents passing through the body of livestock
UNE-EN 31010:2011 Risk management - Risk assessment techniques
ISA 84.00.01-1 : 2004 FUNCTIONAL SAFETY: SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND SOFTWARE REQUIREMENTS
ISO/TS 17137:2014 Cardiovascular implants and extracorporeal systems Cardiovascular absorbable implants
ISO 15198:2004 Clinical laboratory medicine — In vitro diagnostic medical devices — Validation of user quality control procedures by the manufacturer
14/30290166 DC : 0 BS ISO 16142-1 - MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 1: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL NON-IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS
CAN/CSA-ISO/IEC 15026-3:16 Systems and software engineering - Systems and software assurance - Part 3: System integrity levels (Adopted ISO/IEC 15026-3:2015, second edition, 2015-12-01)
10/30238943 DC : 0 BS EN 61000-6-7 ED.1 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-7: GENERIC STANDARDS - IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND EQUIPMENT INTENDED TO PERFORM FUNCTIONS IN A SAFETY-RELATED SYSTEM (FUNCTIONAL SAFETY) IN INDUSTRIAL ENVIRONMENTS
CEI EN 61513 : 2013 NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - GENERAL REQUIREMENT FOR SYSTEMS
NF EN 60073 : 2003 BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - CODING PRINCIPLES FOR INDICATORS AND ACTUATORS
ISO 11228-3:2007 Ergonomics Manual handling Part 3: Handling of low loads at high frequency
09/30201664 DC : 0 BS EN ISO 12100 - SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN, RISK ASSESSMENT AND RISK REDUCTION
08/30193474 DC : DRAFT NOV 2008 BS EN 61508-5 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 5: EXAMPLES OF METHODS FOR THE DETERMINATION OF SAFETY INTEGRITY LEVELS
BS EN 61784-3-6:2010 Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 6
I.S. EN 60695-11-4:2011 FIRE HAZARD TESTING - PART 11-4: TEST FLAMES - 50 W FLAME - APPARATUS AND CONFIRMATIONAL TEST METHOD (IEC 60695-11-4:2011)
I.S. EN ISO 18113-1:2011 IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS (ISO 18113-1:2009)
I.S. EN 82079-1:2012 PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION - PART 1: GENERAL PRINCIPLES AND DETAILED REQUIREMENTS (IEC 82079-1:2012 (EQV))
I.S. EN 60695-2-13:2010 FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS
CEI EN 62133-1 : 1ED 2017 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NONACID ELECTROLYTES - SAFETY REQUIREMENTS FOR PORTABLE SEALED SECONDARY CELLS, AND FOR BATTERIES MADE FROM THEM, FOR USE IN PORTABLE APPLICATIONS - PART 1: NICKEL SYSTEMS
PD ISO/TS 37151:2015 Smart community infrastructures. Principles and requirements for performance metrics
BS EN 60073:2002 Basic and safety principles for man-machine interface, marking and identification. Coding principles for indicators and actuators
PD CEN/TR 13387:2004 Child use and care articles. Safety guidelines
S.R. CEN/TR 15592:2007 HEALTH SERVICES - QUALITY MANAGEMENT SYSTEMS - GUIDE FOR THE USE OF EN ISO 9004:2000 IN HEALTH SERVICES FOR PERFORMANCE IMPROVEMENT
BS ISO 22300 : 2012 SOCIETAL SECURITY - TERMINOLOGY
CEN/TR 15809:2008 Characterization of sludges - Hygienic aspects - Treatments
04/30122366 DC : DRAFT SEP 2004 EN ISO 10218 - ROBOTS FOR INDUSTRIAL ENVIRONMENTS - SAFETY REQUIREMENTS
EN 62619:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications
BS EN 61326-3-2:2008 Electrical equipment for measurement, control and laboratory use. EMC requirements Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety). Industrial applications with specified electromagnetic environment
06/30146511 DC : 0 BS ISO 18113-1 - CLINICAL LABORATORY TESTING AND IN VITRO DIAGNOSTIC MEDICAL SYSTEMS - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS
15/30330406 DC : 0 BS EN 50126-2 - RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY,AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 2: SYSTEMS APPROACH TO SAFETY
I.S. EN 50090-2-3:2005 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-3: SYSTEM OVERVIEW - GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN HBES
05/30127789 DC : DRAFT JAN 2005 IEC 60695-2-13 ED.2 - FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITABILITY TEST METHOD FOR MATERIALS
05/30143464 DC : DRAFT DEC 2005 IEC 61508-4 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY - PART 4: DEFINITIONS AND ABBREVIATIONS
02/645215 DC : DRAFT OCT 2002 EN 50090-2-3:2002 - HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-3: SYSTEM OVERVIEW - GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN HBES
BS EN 61800-5-2:2017 Adjustable speed electrical power drive systems Safety requirements. Functional
PD ISO/IEC Guide 73:2002 Risk management. Vocabulary. Guidelines for use in standards
I.S. EN 60335-1:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS
UNI CEI EN ISO 14971 : 2012 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
I.S. EN 31010:2010 RISK MANAGEMENT - RISK ASSESSMENT TECHNIQUES (IEC/ISO 31010:2009 (EQV))
10/30208681 DC : DRAFT SEP 2010 BS ISO/IEC GUIDE 63 - GUIDE TO THE DEVELOPMENT AND INCLUSION OF SAFETY ASPECTS IN INTERNATIONAL STANDARDS FOR MEDICAL DEVICES
S.R. CEN/TR 15809:2008 CHARACTERIZATION OF SLUDGES - HYGIENIC ASPECTS - TREATMENTS
BS ISO 15190:2003 Medical laboratories. Requirements for safety
BS EN 60695-7-2:2011 Fire hazard testing Toxicity of fire effluent. Summary and relevance of test methods
CSA Z434 : 2014 INDUSTRIAL ROBOTS AND ROBOT SYSTEMS
07/30169687 DC : 0 BS EN 60695-1-11 - FIRE HAZARD TESTING - PART 1-11: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - FIRE HAZARD ASSESSMENT
BS EN 80416-1:2002 Basic principles for graphical symbols for use on equipment Creation of symbol originals
CSA ISO 14798:2012 LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - RISK ASSESSMENT AND REDUCTION METHODOLOGY
03/102127 DC : DRAFT JAN 2003 IEC 60086-5 ED.2 - PRIMARY BATTERIES - PART 5: SAFETY OF BATTERIES WITH AQUEOUS ELECTROLYTE
09/30206605 DC : 0 BS EN 60695-2-10 ED.2 - FIRE HAZARD TESTING - PART 2-10: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE
BS EN 62133:2013 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications
BS EN 60695-11-20:2015 Fire hazard testing Test flames. 500 W flame test methods
I.S. EN 61140:2016 PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT
IEC TS 62735-1:2015 Direct current (DC) plugs and socket-outlets for information and communication technology (ICT) equipment installed in data centres and telecom central offices - Part 1: Plug and socket-outlet system for 2,6 kW
IEC 60073:2002 Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
NF EN 60695-6-1 : 2005 AMD 1 2011 FIRE HAZARD TESTING - PART 6-1: SMOKE OBSCURATION - GENERAL GUIDANCE
I.S. EN 62620:2015 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SECONDARY LITHIUM CELLS AND BATTERIES FOR USE IN INDUSTRIAL APPLICATIONS
DD CEN/TS 15260:2006 Health informatics. Classification of safety risks from health informatics products
CSA ISO 14971 : 2007 : R2012 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
I.S. EN 60695-6-1:2005 FIRE HAZARD TESTING - PART 6-1: SMOKE OBSCURATION - GENERAL GUIDANCE
EN 61784-3-17:2017 Industrial communication networks - Profiles - Part 3-17: Functional safety fieldbuses - Additional specifications for CPF 17
CSA Z15190 : 2005 MEDICAL LABORATORIES - REQUIREMENTS FOR SAFETY
UNI ISO 22300 : 2013 SOCIETAL SECURITY - TERMINOLOGY
PREN 17141 : DRAFT 2017 CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL
UNE-EN 60086-5:2011 Primary batteries - Part 5: Safety of batteries with aqueous electrolyte
I.S. EN 62570:2015 STANDARD PRACTICE FOR MARKING MEDICAL DEVICES AND OTHER ITEMS FOR SAFETY IN THE MAGNETIC RESONANCE ENVIRONMENT
AAMI TIR32 :2004 MEDICAL DEVICE SOFTWARE RISK MANAGEMENT
PD IEC/TS 60695-1-14:2017 Fire hazard testing Guidance on the different levels of power and energy related to the probability of ignition and fire in low voltage electrotechnical products
UNE-EN 60695-11-4:2012 Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method
16/30298078 DC : 0 BS EN 82079-1 ED 2.0 - PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION - PART 1: GENERAL PRINCIPLES AND DETAILED REQUIREMENTS
UNI EN ISO 11930 : 2012 COSMETICS - MICROBIOLOGY - EVALUATION OF THE ANTIMICROBIAL PROTECTION OF A COSMETIC PRODUCT
AAMI ISO 14971 : 2007 : R2010 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
BS EN 61508-4:2010 Functional safety of electrical/electronic/ programmable electronic safety related systems Definitions and abbreviations
CEN/CLC Guide 6:2014 Guide for addressing accessibility in standards
BS EN 60447:2004 Basic and safety principles for man-machine interface, marking and identification. Actuating principles
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 :2016 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
I.S. EN 16991:2018 RISK-BASED INSPECTION FRAMEWORK
I.S. EN 61784-3-18:2011 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-18: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 18
UNE-EN 60695-2-11:2015 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)
I.S. EN 61508-1:2010 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 1: GENERAL REQUIREMENTS
I.S. EN 61784-3-1:2010 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-1: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 1
BS EN 60061-4:1992+A16:2018 Lamp caps and holders together with gauges for the control of interchangeability and safety Guidelines and general information
UNE-EN 60695-2-10:2013 Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
I.S. EN ISO 11930:2012 COSMETICS - MICROBIOLOGY - EVALUATION OF THE ANTIMICROBIAL PROTECTION OF A COSMETIC PRODUCT (ISO 11930:2012)
ISO/TS 20405:2018 Health informatics Framework of event data and reporting definitions for the safety of health software
EN ISO 4007:2012 Personal protective equipment - Eye and face protection - Vocabulary (ISO 4007:2012)
CEI EN 61784-3-18 : 2012 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-18: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 18
ISO/IEC 14762:2009 Information technology Functional safety requirements for Home and Building Electronic Systems (HBES)
I.S. EN 62368-1:2014 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED)
I.S. EN 61784-3-12:2010 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-12: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 12
ISO Guide 82:2014 Guidelines for addressing sustainability in standards
ANSI/ASSE Z690 PACKAGE : 2011 ANSI/ASSE Z690.1-2011 - VOCABULARY FOR RISK MANAGEMENT; ANSI/ASSE Z690.2-2011 - RISK MANAGEMENT - PRINCIPLES AND GUIDELINES; ANSI/ASSE Z690.3-2011 - RISK ASSESSMENT TECHNIQUES; ISO/ANSI/ASSE/TR-31004-2014 (Z690 TR-2014) RISK MANAGEMENT-GUIDANCE FOR THE IMPLEMENTATION OF ISO 31004
I.S. EN 60695-1-10:2017 FIRE HAZARD TESTING - PART 1-10: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - GENERAL GUIDELINES
UNI EN 16310 : 2013 ENGINEERING SERVICES - TERMINOLOGY TO DESCRIBE ENGINEERING SERVICES FOR BUILDINGS, INFRASTRUCTURE AND INDUSTRIAL FACILITIES
I.S. EN 60073:2002 BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - CODING PRINCIPLES FOR INDICATION DEVICES AND ACTUATORS
I.S. EN 60695-11-3:2012 FIRE HAZARD TESTING - PART 11-3: TEST FLAMES - 500 W FLAMES - APPARATUS AND CONFIRMATIONAL TEST METHODS (IEC 60695-11-3:2012 (EQV))
CEN ISO/TR 22100-1:2017 Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards (ISO/TR 22100-1:2015)
CSA CEI/IEC 62304:14 (R2019) Medical device software - Software life cycle processes (Adopted CEI/IEC 62304:2006, first edition, 2006-05) | Logiciels de dispositifs médicaux - Processus du cycle de vie du logiciel (norme CEI/IEC 62304:2006 adoptée, première édition, 2006-05)
I.S. EN 61010-031:2015 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 031: SAFETY REQUIREMENTS FOR HAND-HELD PROBE ASSEMBLIES FOR ELECTRICAL MEASUREMENT AND TEST
I.S. EN 60695-1-20:2016 FIRE HAZARD TESTING - PART 1-20: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - GENERAL GUIDANCE
ANSI/ASSE Z690.1 : 2011 VOCABULARY FOR RISK MANAGEMENT
I.S. EN 60519-1:2015 SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS
ISO 14708-5:2010 Implants for surgery Active implantable medical devices Part 5: Circulatory support devices
I.S. EN 60695-8-1:2017 FIRE HAZARD TESTING - PART 8-1: HEAT RELEASE - GENERAL GUIDANCE
I.S. EN 60447:2004 BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - ACTUATING PRINCIPLES
I.S. EN 60601- 1:2006&A1:2013&AC:2014&A12:2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
IEC TR 60479-3:1998 Effects of current on human beings and livestock - Part 3: Effects of currents passing through the body of livestock
PD ISO/TS 19930:2017 Guidance on aspects of a risk-based approach to assuring sterility of terminally sterilized, single-use health care product that is unable to withstand processing to achieve maximally a sterility assurance level of 10-6
UNE-EN 60695-7-3:2012 Fire hazard testing - Part 7-3: Toxicity of fire effluent - Use and interpretation of test results
EN 60695-4:2012 FIRE HAZARD TESTING - PART 4: TERMINOLOGY CONCERNING FIRE TESTS FOR ELECTROTECHNICAL PRODUCTS (IEC 60695-4:2012)
EN 16704-1:2016 Railway applications - Track - Safety protection on the track during work - Part 1: Railway risks and common principles for protection of fixed and mobile work sites
I.S. CEN/TR 14489:2005 FIRE-RESISTANT HYDRAULIC FLUIDS - CLASSIFICATION AND SPECIFICATION - GUIDELINES ON SELECTION FOR THE PROTECTION OF SAFETY, HEALTH AND THE ENVIRONMENT
SWIFT 31000:2010 NATIONAL GUIDANCE ON IMPLEMENTING I.S. ISO 31000:2009 RISK MANAGEMENT - PRINCIPLES AND GUIDELINES
CEI EN 62133 : 2014 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR PORTABLE SEALED SECONDARY CELLS, AND FOR BATTERIES MADE FROM THEM, FOR USE IN PORTABLE APPLICATIONS
BS EN 60695-1-30:2017 Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process. General guidelines
DIN EN ISO 22300:2014-12 SOCIETAL SECURITY - TERMINOLOGY (ISO 22300:2012)
DIN EN ISO 5359:2015-02 ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES (ISO 5359:2014)
PD CEN ISO/TR 22100-1:2017 Safety of machinery. Relationship with ISO 12100 How ISO 12100 relates to type-B and type-C standards
I.S. EN 61243-3:2014 LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE
IEC 62368-3:2017 Audio/video, information and communication technology equipment - Part 3: Safety aspects for DC power transfer through communication cables and ports
UNE-EN ISO 12100:2012 Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
CEI EN 60695-7-3 : 2013 FIRE HAZARD TESTING - PART 7-3: TOXICITY OF FIRE EFFLUENT - USE AND INTERPRETATION OF TEST RESULTS
CEI EN 60255-1 : 2011 MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 1: COMMON REQUIREMENTS
UNI EN ISO 14031 : 2013 ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL PERFORMANCE EVALUATION - GUIDELINES
EN 131-3:2018 Ladders - Part 3: Marking and user instructions
I.S. EN 61010-1:2010 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
I.S. EN 61936-1:2010 POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES
EN ISO 14971:2012 Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corrected version 2007-10-01)
ISO/TR 22100-1:2015 Safety of machinery Relationship with ISO 12100 Part 1: How ISO 12100 relates to type-B and type-C standards
ISO/TS 37151:2015 Smart community infrastructures Principles and requirements for performance metrics
ISO 21940-23:2012 Mechanical vibration — Rotor balancing — Part 23: Enclosures and other protective measures for the measuring station of balancing machines
IEC 60695-2-11 REDLINE : 2ED 2014 FIRE HAZARD TESTING - PART 2-11: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY TEST METHOD FOR END-PRODUCTS (GWEPT)
ISO 17894:2005 Ships and marine technology Computer applications General principles for the development and use of programmable electronic systems in marine applications
I.S. EN 13611:2015 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
ISO 13022:2012 Medical products containing viable human cells — Application of risk management and requirements for processing practices
ISO/TR 21245-2:2016 Railway applications Rail project planning process Part 2: Conditions
ISO/TS 11937:2012 Nanotechnologies — Nanoscale titanium dioxide in powder form — Characteristics and measurement
IEC TS 60479-2 REDLINE : 4ED 2017 EFFECTS OF CURRENT ON HUMAN BEINGS AND LIVESTOCK - PART 2: SPECIAL ASPECTS
IEC 61010-031 REDLINE : 2ED 2015 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 031: SAFETY REQUIREMENTS FOR HAND-HELD PROBE ASSEMBLIES FOR ELECTRICAL MEASUREMENT AND TEST
I.S. EN 60730-1:2016 AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS
I.S. EN 61784-3-2:2017 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-2: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 2
IEC TS 60695-11-11:2016 Fire hazard testing - Part 11-11: Test flames - Determination of the characteristic heat flux for ignition from a non-contacting flame source
IEC TS 60695-11-3:2004 Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods
IEC TR 60695-1-21:2008 Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods
I.S. EN 60695-7-1:2010 FIRE HAZARD TESTING - PART 7-1: TOXICITY OF FIRE EFFLUENTS - GENERAL GUIDANCE
I.S. EN 61069-1:2016 INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 1: TERMINOLOGY AND BASIC CONCEPTS
IEC TS 60695-11-21:2005 Fire hazard testing - Part 11-21: Test flames - 500 W vertical flame test method for tubular polymeric materials
I.S. EN 61784-3-13:2017 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-13: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 13
I.S. EN 62209-2:2010 HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM HAND-HELD AND BODYMOUNTED WIRELESS COMMUNICATION DEVICES - HUMAN MODELS, INSTRUMENTATION, AND PROCEDURES - PART 2: PROCEDURE TO DETERMINE THE SPECIFIC ABSORPTION RATE (SAR) FOR WIRELESS COMMUNICATION DEVICES USED IN CLOSE PROXIMITY TO THE HUMAN BODY (FREQUENCY RANGE OF 30 MHZ TO 6 GHZ)
I.S. EN 60398:2015 INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - GENERAL PERFORMANCE TEST METHODS
IEC 60695-1-30:2017 Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines
I.S. EN 60695-9-1:2013 FIRE HAZARD TESTING - PART 9-1: SURFACE SPREAD OF FLAME - GENERAL GUIDANCE (IEC 60695-9-1:2013 (EQV))
IEC 61326-3-1:2017 RLV Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications
IEC 61784-3-2:2016 Industrial communication networks - Profiles - Part 3-2: Functional safety fieldbuses - Additional specifications for CPF 2
IEC 60695-11-10:2013 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
IEEE 242-2001 IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (IEEE Buff Book)
DIN EN 764-7:2002-09 PRESSURE EQUIPMENT - PART 7: SAFETY SYSTEMS FOR UNFIRED PRESSURE EQUIPMENT
DIN EN ISO 14630:2013-03 Non-active surgical implants - General requirements (ISO 14630:2012)
IEC 61800-5-2:2016 RLV Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
PD IEC/TS 62850:2013 Safety requirements for electrical equipment for measurement, control, and laboratory use. General requirements for equipment intended to be used in educational establishments by children
BS EN 764-7:2002 Pressure equipment Safety systems for unfired pressure vessels
IEC 60695-11-3:2012 Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods
BS EN 62271-212:2017 High-voltage switchgear and controlgear Compact Equipment Assembly for Distribution Substation (CEADS)
BS EN 1005-5:2007 Safety of machinery. Human physical performance Risk assessment for repetitive handling at high frequency
IEC 60695-2-10:2013 Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
BS EN 60601-1 : 2006 MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
BS EN ISO 17776:2016 Petroleum and natural gas industries. Offshore production installations. Major Accident hazard management during the design of new installations
IEC 62052-31:2015 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests
BS EN ISO 10821 : 2005 INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS
IEC 60519-1:2015 Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
13/30277685 DC : 0 BS EN 60519-1 - SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS
ISO 10821:2005 Industrial sewing machines Safety requirements for sewing machines, units and systems
IEC 60695-11-4:2011 Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method
IEC 60601-1:2005+AMD1:2012 CSV Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
ISO 22000:2005 Food safety management systems Requirements for any organization in the food chain
IEC TS 62850:2013 Safety requirements for electrical equipment for measurement, control, and laboratory use - General requirements for equipment intended to be used in educational establishments by children
IEC 62133 : 2.0EN+(REDLINE+VERSION) SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR PORTABLE SEALED SECONDARY CELLS, AND FOR BATTERIES MADE FROM THEM, FOR USE IN PORTABLE APPLICATIONS
IEC 60695-9-1:2013 Fire hazard testing - Part 9-1: Surface spread of flame - General guidance
IEC TS 60695-7-3:2004 Fire hazard testing - Part 7-3: Toxicity of fire effluent - Use and interpretation of test results
IEC 60061-4:2005 CSV Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information
DD IEC TS 60695-9-2 : DRAFT 2005 FIRE HAZARD TESTING - PART 9-2: SURFACE SPREAD OF FLAME - SUMMARY AND RELEVANCE OF TEST METHODS
BS EN 13138-2:2014 Buoyant aids for swimming instruction Safety requirements and test methods for buoyant aids to be held
EN 60669-1:2018 Switches for household and similar fixed electrical installations - Part 1: General requirements
DD IEC TS 60695-6-2 : DRAFT 2005 FIRE HAZARD TESTING - PART 6-2: SMOKE OBSCURATION - SUMMARY AND RELEVANCE OF TEST METHODS
BS EN 50532:2010 Compact equipment assembly for distribution substations (CEADS)
BS EN 60695-9-2:2014 Fire hazard testing Surface spread of flame. Summary and relevance of test methods
IEC 62271-204:2011 High-voltage switchgear and controlgear - Part 204: Rigid gas-insulated transmission lines for rated voltage above 52 kV
BS EN 60695-8-2:2017 Fire hazard testing Heat release. Summary and relevance of test methods
PD CR 13455:1999 Soil improvers and growing media. Guidelines for the safety of users, the environment and plants
UNE-EN 62271-201:2015 High-voltage switchgear and controlgear - Part 201: AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
IEC 61131-6:2012 Programmable controllers - Part 6: Functional safety
IEC 80416-1:2008 Basic principles for graphical symbols for use on equipment - Part 1: Creation of graphical symbols for registration
IEC 60695-1-11:2014 Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment
IEC 61508-1:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508)
IEC/ISO 31010:2009 Risk management - Risk assessment techniques
ISO 14698-1:2003 Cleanrooms and associated controlled environments Biocontamination control Part 1: General principles and methods
IEC 60695-1-21:2016 Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods
BS ISO 19372:2015 Microturbines applications. Safety
BS EN 61140 : 2002 PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT
IEC 60695-2-11:2014 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)
IEC 60447:2004 Basic and safety principles for man-machine interface, marking and identification - Actuating principles
11/30211394 DC : DRAFT MAR 2011 BS ISO 20100 - GASEOUS HYDROGEN - FUELLING STATIONS
IEC 60398:2015 Installations for electroheating and electromagnetic processing - General performance test methods
ISO 10218-1:2011 Robots and robotic devices Safety requirements for industrial robots Part 1: Robots
ISO/IEC TS 15504-10:2011 Information technology — Process assessment — Part 10: Safety extension
IEC 61069-7:2016 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 7: Assessment of system safety
IEC 60695-6-1:2005+AMD1:2010 CSV Fire hazard testing - Part 6-1: Smoke obscuration - General guidance
BS EN 13060 : 2014 SMALL STEAM STERILIZERS
IEC 60255-1:1967 Electrical relays - Part 1: Instantaneous all-or-nothing relays
IEC 61069-1:2016 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 1: Terminology and basic concepts
IEC 60695-4:2012 Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products
IEC TS 62933-5-1:2017 Electrical energy storage (EES) systems - Part 5-1: Safety considerations for grid-integrated EES systems - General specification
UNE-EN 60255-1:2010 Measuring relays and protection equipment -- Part 1: Common requirements
IEC 61508-2:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508)
IEC 60695-10-3:2016 Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test
IEC 60695-10-2:2014 Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method
IEC 61508-4:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508)
ISO 17776:2016 Petroleum and natural gas industries Offshore production installations Major accident hazard management during the design of new installations
UNE-ISO 16110-1:2015 Hydrogen generators using fuel processing technologies -- Part 1: Safety
IEC 62570:2014 Standard practice for marking medical devices and other items for safety in the magnetic resonance environment
IEC 62271-212:2016 High-voltage switchgear and controlgear - Part 212: Compact Equipment Assembly for Distribution Substation (CEADS)
BS EN ISO 22000:2005 Food safety management systems. Requirements for any organization in the food chain
IEC 60695-2-12:2010+AMD1:2014 CSV Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods- Glow-wire flammability index (GWFI) test method for materials
IEC 61243-3:2014 Live working - Voltage detectors - Part 3: Two-pole low-voltage type
ISO 18113-1:2009 In vitro diagnostic medical devices — Information supplied by the manufacturer (labelling) — Part 1: Terms, definitions and general requirements
IEC 60695-11-20:2015 Fire hazard testing - Part 11-20: Test flames - 500 W flame test method
IEC 60601-1-10:2007+AMD1:2013 CSV Medical electrical equipment - Part 1-10: General requirements forbasic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loopcontrollers
IEC 62079:2001 Preparation of instructions - Structuring, content and presentation
09/30202403 DC : 0 BS EN 50532 - COMPACT EQUIPMENT ASSEMBLY FOR DISTRIBUTION SUBSTATIONS (CEADS)
IEC 62271-202:2014 High-voltage switchgear and controlgear - Part 202: High-voltage/ low-voltage prefabricated substation
IEC 61821:2011 Electrical installations for lighting and beaconing of aerodromes - Maintenance of aeronautical ground lighting constant current series circuits
11/30233799 DC : 0 BS EN 60730-1 ED5 - AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 1: GENERAL REQUIREMENTS
UNE-EN ISO 14630:2013 Non-active surgical implants - General requirements (ISO 14630:2012)
BS EN ISO 5840:2009 Cardiovascular implants. Cardiac valve prostheses
UNE-EN 50532:2011 Compact Equipment Assembly for Distribution Substations (CEADS)
13/30267440 DC : 0 BS EN 60086-4 ED 4.0 - PRIMARY BATTERIES - PART 4: SAFETY OF LITHIUM BATTERIES
IEC TR 62368-2:2015 Audio/video, information and communication technology equipment - Part 2: Explanatory information related to IEC 62368-1
BS EN 61936-1 : 2010 POWER INSTALLATIONS EXCEEDING 1 KV A.C - PART 1: COMMON RULES
ISO 14798:2009 Lifts (elevators), escalators and moving walks Risk assessment and reduction methodology
IEC TS 62492-2:2013 Industrial process control devices - Radiation thermometers - Part 2: Determination of the technical data for radiation thermometers
IEC 60695-1-10:2016 Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines
IEC 61000-1-2:2016 Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena
UNE-EN 60695-7-2:2012 Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods
UNE-EN 61936-1:2012 Power installations exceeding 1 kV a.c. -- Part 1: Common rules
IEC 60884-1:2002+AMD1:2006+AMD2:2013 CSV Plugs and socket-outlets for household and similar purposes - Part1: General requirements
UNE-EN 60695-11-20:2016 Fire hazard testing - Part 11-20: Test flames - 500 W flame test methods
EN 82079-1:2012 Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements
ISO 14031:2013 Environmental management Environmental performance evaluation Guidelines
16/30351274 DC : 0 BS EN 62933-5-1 - ELECTRICAL ENERGY STORAGE (ESS) SYSTEMS - PART 5-1: SAFETY CONSIDERATIONS RELATED TO GRID INTEGRATED ELECTRICAL ENERGY STORAGE (EES) SYSTEMS
UNE-EN 60695-11-10:2014 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
UNE-EN ISO 11930:2012 Cosmetics - Microbiology - Evaluation of the antimicrobial protection of a cosmetic product (ISO 11930:2012, corrected version 2013-05-01)
UNE-EN ISO 14031:2015 Environmental management - Environmental performance evaluation - Guidelines (ISO 14031:2013)
UNE-EN 61243-3:2015 Live working - Voltage detectors - Part 3: Two-pole low-voltage type
IEC 60086-4:2014 Primary batteries - Part 4: Safety of lithium batteries
UNE-EN 60695-4:2012 Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products
CEN/TR 14489:2005 Fire-resistant hydraulic fluids - Classification and specification - Guidelines on selection for the protection of safety, health and the environment
EN 61960-1:2001 Secondary lithium cells and batteries for portable applications - Part 1: Secondary lithium cells
EN 80416-1:2009 Basic principles for graphical symbols for use on equipment - Part 1: Creation of graphical symbols for registration
EN 61511-1:2017/A1:2017 FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND APPLICATION PROGRAMMING REQUIREMENTS
EN 62271-204:2011 High-voltage switchgear and controlgear - Part 204: Rigid gas-insulated transmission lines for rated voltage above 52 kV
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
EN 764-7:2002/AC:2006 PRESSURE EQUIPMENT - PART 7: SAFETY SYSTEMS FOR UNFIRED PRESSURE EQUIPMENT
EN 16310:2013 Engineering services - Terminology to describe engineering services for buildings, infrastructure and industrial facilities
EN ISO 10218-1:2011 Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robots (ISO 10218-1:2011)
EN ISO 14798:2013 Lifts (elevators), escalators and moving walks - Risk assessment and reduction methodology (ISO 14798:2009)
EN 15198:2007 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
EN ISO 10821:2005/A1:2009 Industrial sewing machines - Safety requirements for sewing machines, units and systems - Amendment 1 (ISO 10821:2005/Amd 1:2009, Corrected version 2009-08-01)
EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
EN 15233:2007 Methodology for functional safety assessment of protective systems for potentially explosive atmospheres
EN ISO 17776:2016 Petroleum and natural gas industries - Offshore production installations - Major Accident hazard management during the design of new installations (ISO 17776:2016)
EN ISO 22000:2005 Food safety management systems - Requirements for any organization in the food chain (ISO 22000:2005)
EN ISO 15194:2009 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for certified reference materials and the content of supporting documentation (ISO 15194:2009)
EN 1441 : 1997 MEDICAL DEVICES - RISK ANALYSIS
EN ISO 14630:2012 Non-active surgical implants - General requirements (ISO 14630:2012)
EN ISO 18113-1:2011 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009)
MEDDEV 2.12-1 : REV 8 : 2013 GUIDELINES ON A MEDICAL DEVICES VIGILANCE SYSTEM
I.S. EN 50126-1:2017 RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 1: GENERIC RAMS PROCESS
BS EN ISO 14798:2013 Lifts (elevators), escalators and moving walks. Risk assessment and reduction methodology
UNE-EN 62133:2013 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications
UNE-EN 60695-1-10:2017 Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines
I.S. EN ISO 10218-1:2011 ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 1: ROBOTS
BS EN ISO 5359 : 2014 ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES
PD ISO/TS 12901-1:2012 Nanotechnologies. Occupational risk management applied to engineered nanomaterials Principles and approaches
DD IEC TS 60695-1-20 : DRAFT MAR 2008 FIRE HAZARD TESTING - PART 1-20: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - GENERAL GUIDANCE
I.S. EN ISO 5359:2014 ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES (ISO 5359:2014)
BS EN 60695-8-1:2017 Fire hazard testing Heat release. General guidance
12/30264224 DC : 0 BS EN 61511-1 ED.2 - FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - NORMATIVE - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND SOFTWARE REQUIREMENTS
PD ISO/TS 11931:2012 Nanotechnologies. Nanoscale calcium carbonate in powder form. Characteristics and measurement
13/30285587 DC : 0 BS EN 14459 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - CONTROL FUNCTIONS IN ELECTRONIC SYSTEMS - METHODS FOR CLASSIFICATION AND ASSESSMENT
PD IEC/TR 63054:2017 Low-voltage switchgear and controlgear. Fire risk analysis and risk reduction measures
DIN 820-13:2016-03 (Draft) STANDARDIZATION - PART 13: ADOPTION OF EUROPEAN DOCUMENTS OF CEN, CENELEC AND OF ETSI - PRESENTATION OF DOCUMENTS
IEC 60695-11-2:2017 RLV Fire hazard testing - Part 11-2: Test flames - 1 kW pre-mixed flame - Apparatus, confirmatory test arrangement and guidance
BS EN 60695-11-2:2017 Fire hazard testing Test flames. 1 kW pre-mixed flame. Apparatus, confirmatory test arrangement and guidance
10/30216236 DC : DRAFT JAN 2010 BS EN 60695-11-4 - FIRE HAZARD TESTING - PART 11-4: TEST FLAMES - 50 W FLAME - APPARATUS AND CONFIRMATIONAL TEST METHODS
14/30318354 DC : 0 BS EN 61326-3-2 ED. 2 - ELECTRICAL EQUIPMENT FOR MEASUREMENT CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-2: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - INDUSTRIAL APPLICATIONS WITH SPECIFIED ELECTROMAGNETIC ENVIRONMENT
UNI ISO 21940-23 : 2012 MECHANICAL VIBRATION - ROTOR BALANCING - PART 23: ENCLOSURES AND OTHER PROTECTIVE MEASURES FOR THE MEASURING STATION OF BALANCING MACHINES
I.S. EN ISO 12100-1:2003 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
UNE-EN 61508-3:2011 Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 3: Software requirements
CEN/CLC Guide 11:2012 Product information relevant to consumers - Guidelines for standard developers
EN ISO 5359:2014/A1:2017 ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES (ISO 5359:2014/AMD 1:2017)
13/30294106 DC : 0 BS EN 61784-3 ED 3.0 - INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3: FUNCTIONAL SAFETY FIELDBUSES - GENERAL RULES AND PROFILE DEFINITIONS
08/30193510 DC : DRAFT NOV 2008 BS EN 61508-3 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 3: SOFTWARE REQUIREMENTS
BS ISO 21940-23:2012 Mechanical vibration. Rotor balancing Enclosures and other protective measures for the measuring station of balancing machines
UNE-ISO 3534-2:2013 Statistics -- Vocabulary and symbols -- Part 2: Applied statistics
UNE-EN 60695-11-3:2013 Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods
DD IEC/TS 60695-11-4:2004 Fire hazard testing Test flames. 50 W flame. Apparatus and confirmational test method
S.R. CEN TR 15640:2007 HEALTH INFORMATICS - MEASURES FOR ENSURING THE PATIENT SAFETY OF HEALTH SOFTWARE
10/30203224 DC : 0 BS ISO 13022 - MEDICAL PRODUCTS CONTAINING VIABLE HUMAN CELLS - APPLICATION OF RISK MANAGEMENT AND REQUIREMENTS FOR PROCESSING PRACTICES
I.S. EN 60061-4:1993 LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY - PART 4: GUIDELINES AND GENERAL INFORMATION
BS 7971-2:2003 Protective clothing and equipment for use in violent situations and in training Guidance on risk assessment and on the selection, use, cleaning and maintenance of protective clothing and equipment
I.S. EN 50657:2017 RAILWAYS APPLICATIONS - ROLLING STOCK APPLICATIONS - SOFTWARE ON BOARD ROLLING STOCK
CSA ISO/IEC 14762 : 2010 INFORMATION TECHNOLOGY - FUNCTIONAL SAFETY REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES)
12/30257022 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
BS IEC 61508-2 : 2000 AMD 13780 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 2: REQUIREMENTS FOR ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS
BS ISO 7475:2002 Mechanical vibration. Balancing machines. Enclosures and other protective measures for the measuring station
BS EN 60695-2-13 : 2010 FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS
BS EN ISO 12100:2010 Safety of machinery. General principles for design. Risk assessment and risk reduction
CAN/CSA-C22.2 NO. 61508-1:17 Functional safety of electrical/electronic/programmable electronic safety-related systems — Part 1: General requirements (Adopted IEC 61508-1:2010, second edition, 2010-04, with Canadian deviations) | Sécurité fonctionnelle des systèmes électriques/électroniques/électroniques programmables relatifs à la sécurité — Partie 1 : Exigences générales (norme IEC 61508-1:2010 adoptée, deuxième édition, 2010-04, avec exigences propres au Canada)
10/30198657 DC : 0 BS EN 60695-7-1 - FIRE HAZARD TESTING - PART 7-1: TOXICITY OF FIRE EFFLUENT - GENERAL GUIDANCE
BS PD ISO/TR 22100-1 : 2015 SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 1: HOW ISO 12100 RELATES TO TYPE-B AND TYPE-C STANDARDS
DIN EN ISO 18113-1:2013-01 IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS (ISO 18113-1:2009)
CEI EN 60073 : 2003 BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - CODING PRINCIPLES FOR INDICATORS AND ACTUATORS
14/30302089 DC : 0 BS EN 61000-1-2 ED1 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 1-2: GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC SYSTEMS INCLUDING EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA
DIN 820-15:2016-03 (Draft) STANDARDIZATION - PART 15: IMPLEMENTATION OF ISO AND IEC INTERNATIONAL DOCUMENTS - PRESENTATION OF DOCUMENTS
02/209100 DC : DRAFT DEC 2002 IEC 62281 ED.1 - SAFETY OF PRIMARY AND SECONDARY LITHIUM CELLS AND BATTERIES DURING TRANSPORT
BS EN ISO 18113-1:2011 In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling) Terms, definitions and general requirements
CEI 76-11 : 2011 SAFETY OF LASER PRODUCTS - PART 14: A USER'S GUIDE
CEN Guide 414:2017 Safety of machinery - Rules for the drafting and presentation of safety standards
BS EN 62620:2015 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Secondary lithium cells and batteries for use in industrial applications
UNE-EN 60695-2-13:2011 Fire hazard testing -- Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials
17/30357883 DC : 0 BS IEC 60695-2-14 ED.1.0 - FIRE HAZARD TESTING - PART 2-14: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE TEST METHOD FOR END PRODUCTS (GWITEP)
ISO 14835-1:2016 Mechanical vibration and shock Cold provocation tests for the assessment of peripheral vascular function Part 1: Measurement and evaluation of finger skin temperature
05/30135949 DC : DRAFT JUL 2005 IEC 60695-1-30 ED 2 - FIRE HAZARD TESTING - PART 1-30: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - USE OF PRESELECTION TESTING PROCEDURES
BS EN 60398:2015 Installations for electroheating and electromagnetic processing. General performance test methods
PD ISO/IEC TS 15504-10:2011 Information technology. Process assessment Safety extension
06/30148739 DC : DRAFT APR 2006 EN 13138-2 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE HELD
BS EN 50491-4-1:2012 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS)
12/30239859 DC : 0 ISO 10377 - CONSUMER PRODUCT SAFETY - GUIDELINES FOR SUPPLIERS
00/203243 DC : 0 IEC 60743. ED. 2 - LIVE WORKING - TERMINOLOGY FOR TOOLS, EQUIPMENT AND DEVICES
BS EN 62271-201:2014 High-voltage switchgear and controlgear AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
BS 16000:2015 Security management. Strategic and operational guidelines
BS EN 60695-2-10:2013 Fire hazard testing Glowing/hot-wire based test methods. Glow-wire apparatus and common test procedure
BS EN 62619:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Safety requirements for secondary lithium cells and batteries, for use in industrial applications
18/30351698 DC : 0 BS EN ISO 20607 - SAFETY OF MACHINERY - INSTRUCTION HANDBOOK - GENERAL DRAFTING PRINCIPLES
06/30153120 DC : DRAFT JULY 2006
UNE-EN 60695-1-11:2016 Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment
15/30326352 DC : 0 BS EN 62281 ED 3.0 - SAFETY OF PRIMARY AND SECONDARY LITHIUM CELLS AND BATTERIES DURING TRANSPORT
04/30116216 DC : DRAFT JUL 2004 IEC TR 61508-0 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 0: FUNCTIONAL SAFETY AND IEC 61508
08/30180170 DC : DRAFT MAR 2008 BS ISO 13824 - GENERAL PRINCIPLES ON RISK ASSESSMENT OF SYSTEMS INVOLVING STRUCTURES
ISO 15188:2001 Project management guidelines for terminology standardization
ANSI/ISO 12100 : 2012 SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION
15/30330403 DC : 0 BS EN 50126-1 - RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 1: GENERIC RAMS PROCESS
10/30216139 DC : 0 BS EN 60695-11-3 - FIRE HAZARD TESTING - PART 11-3: TEST FLAMES - 500 W FLAMES - APPARATUS AND CONFIRMATIONAL TEST METHODS
BS EN 62271-204:2011 High-voltage switchgear and controlgear Rigid gas-insulated transmission lines for rated voltage above 52 kV
06/30144845 DC : DRAFT JAN 2006 IEC 60695-1-21 - FIRE HAZARD TESTING - PART 1-21: IGNITABILITY - SUMMARY AND RELEVANCE OF TEST METHODS
12/30256360 DC : 0 PD CEN/TR 16467 - PLAYGROUND EQUIPMENT ACCESSIBLE FOR ALL CHILDREN
BS EN 61784-3-14:2010 Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 14
BS ISO 13880:1999 Petroleum and natural gas industries. Content and drafting of a technical specification
07/30171041 DC : DRAFT AUG 2007 DD IEC/TS 61000-1-2 -ELECTROMAGNETIC COMPATIBILITY -GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA
04/19984413 DC : DRAFT MARCH 2004 BS ISO 14835-1 - MECHANICAL VIBRATION AND SHOCK - COLD PROVOCATION TESTS FOR THE ASSESSMENT OF PERIPHERAL VASCULAR FUNCTION - PART 1 - MEASUREMENT AND EVALUATION OF FINGER SKIN TEMPERATURE
04/30079743 DC : DRAFT APR 2004 ISO 15378 - PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2000 WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP)
17/30329441 DC : 0 BS EN 17141 - CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL
BS EN 60695-11-5:2017 Fire hazard testing Test flames. Needle-flame test method. Apparatus, confirmatory test arrangement and guidance
BS EN 61784-3-3:2017 Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 3
ISO 19611:2017 Traditional Chinese medicine — Air extraction cupping device
CEI EN 60445 : 2011 BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - IDENTIFICATION OF EQUIPMENT TERMINALS, CONDUCTOR TERMINATIONS AND CONDUCTORS
CEI EN 60695-8-2 : 2ED 2017 FIRE HAZARD TESTING - PART 8-2: HEAT RELEASE - SUMMARY AND RELEVANCE OF TEST METHODS
CEI EN 61821 : 2012 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - MAINTENANCE OF AERONAUTICAL GROUND LIGHTING CONSTANT CURRENT SERIES CIRCUITS
PREN 13138-2 : DRAFT 2012 BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE HELD
CSA Z15190 : 2005 : R2015 MEDICAL LABORATORIES - REQUIREMENTS FOR SAFETY
IEC TS 60695-11-4:2004 Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method
CSA ISO 14798 : 2012 : R2016 LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - RISK ASSESSMENT AND REDUCTION METHODOLOGY
CAN/CSA-Z431-12 (R2016) Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators (Adopted IEC 60073:2002, sixth edition, 2002-05, with Canadian deviations) | Principes fondamentaux et de s?curit? pour l'interface homme-machine, le marquage et l'identification - Principes de codage pour les indicateurs et les organes de commande (norme IEC 60073:2002 adopt?e, sixi?me ?dition, 2002-05, avec exigences propres au Canada)
CSA Z1002 : 2012 OCCUPATIONAL HEALTH AND SAFETY - HAZARD IDENTIFICATION AND ELIMINATION AND RISK ASSESSMENT AND CONTROL
BS EN 61069-7:2016 Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment Assessment of system safety
05/30143456 DC : DRAFT DEC 2005 IEC 61508-2 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY - PART 2: REQUIREMENTS FOR ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS
09/30176666 DC : 0 BS EN 62079 - PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION
EN 60695-11-5:2017 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
IEC 60695-1-12:2015 Fire hazard testing - Part 1-12: Guidance for assessing the fire hazard of electrotechnical products - Fire safety engineering
08/30182018 DC : DRAFT MAY 2008 BS EN 62133 - SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR PORTABLE SEALED SECONDARY CELLS, AND FOR BATTERIES MADE FROM THEM, FOR USE IN PORTABLE APPLICATIONS
ISO 4007:2012 Personal protective equipment Eye and face protection Vocabulary
CEI EN 80416-1 : 2009 BASIC PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - PART 1: CREATION OF GRAPHICAL SYMBOLS FOR REGISTRATION
NF EN 60447 : 2004 BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - ACTUATING PRINCIPLES
06/30148736 DC : 0 EN 13138-1 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE WORN
CEI EN 82079-1 : 2013 PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION - PART 1: GENERAL PRINCIPLES AND DETAILED REQUIREMENTS
CEI EN 62619 : 1ED 2017 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NONACID ELECTROLYTES - SAFETY REQUIREMENTS FOR SECONDARY LITHIUM CELLS AND BATTERIES, FOR USE IN INDUSTRIAL APPLICATIONS
BS EN 61960-2:2002 Secondary lithium cells and batteries for portable applications Secondary lithium batteries
IEC 60990 REDLINE : 3ED 2016 METHODS OF MEASUREMENT OF TOUCH CURRENT AND PROTECTIVE CONDUCTOR CURRENT
IEC 62151:2000 Safety of equipment electrically connected to a telecommunication network
S.R. CLC/TR 62685:2011 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - ASSESSMENT GUIDELINE FOR SAFETY DEVICES USING IEC 61784-3 FUNCTIONAL SAFETY COMMUNICATION PROFILES (FSCPS) (IEC/TR 62685:2010 (EQV))
IEC 61784-3-17:2016 Industrial communication networks - Profiles - Part 3-17: Functional safety fieldbuses - Additional specifications for CPF 17
CSA ISO 14971 : 2007 : R2017 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
I.S. EN 60695-2-12:2010 FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS
IEC GUIDE 110:2014 Home control systems - Guidelines relating to safety
DIN EN 16310:2013-05 ENGINEERING SERVICES - TERMINOLOGY TO DESCRIBE ENGINEERING SERVICES FOR BUILDINGS, INFRASTRUCTURE AND INDUSTRIAL FACILITIES
UNI EN ISO 15194 : 2009 IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION
DIN ISO 7475:2004-04 MECHANICAL VIBRATION - BALANCING MACHINES - ENCLOSURES AND OTHER PROTECTIVE MEASURES FOR THE MEASURING STATION
EN 61784-3-2:2017 Industrial communication networks - Profiles - Part 3-2: Functional safety fieldbuses - Additional specifications for CPF 2
ARSP-2 VOL 1 : 2015 GUIDANCE ON THE DEVELOPMENT OF WEAPON DANGER AREAS/ZONES - PROBABILISTIC METHODOLOGY - GENERAL PRINCIPALS
I.S. EN 60086-5:2016 PRIMARY BATTERIES - PART 5: SAFETY OF BATTERIES WITH AQUEOUS ELECTROLYTE
CEI EN 62133-2 : 1ED 2017 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NONACID ELECTROLYTES - SAFETY REQUIREMENTS FOR PORTABLE SEALED SECONDARY CELLS, AND FOR BATTERIES MADE FROM THEM, FOR USE IN PORTABLE APPLICATIONS - PART 2: LITHIUM SYSTEMS
I.S. ISO GUIDE 73:2009 RISK MANAGEMENT - VOCABULARY
CSA C22.2 No. 60601-1-10 : 2009 : INC : AMD 1 : 2014 : R201400 MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS
CEI EN 60695-1-40 : 2014 FIRE HAZARD TESTING - PART 1-40: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - INSULATING LIQUIDS
FD ISO/IEC GUIDE 50 : 2002 FD SAFETY ASPECTS - GUIDELINES FOR CHILD SAFETY
I.S. EN 62133-2:2017 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR PORTABLE SEALED SECONDARY CELLS, AND FOR BATTERIES MADE FROM THEM, FOR USE IN PORTABLE APPLICATIONS - PART 2: LITHIUM SYSTEMS
UNE-EN 61508-2:2011 Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems
I.S. EN 61131-6:2012 PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY (IEC 61131-6:2012 (EQV))
BS EN ISO 22300:2014 Societal security. Terminology
S.R. CEN/TR 15584:2007 CHARACTERISATION OF SLUDGES - GUIDE TO RISK ASSESSMENT ESPECIALLY IN RELATION TO USE AND DISPOSAL OF SLUDGES
ASTM E 2898 : 2014 : REDLINE Standard Guide for Risk-Based Validation of Analytical Methods for PAT Applications
CEI EN 61784-3-13 : 2012 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-13: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 13
BS EN 60695-10-2:2014 Fire hazard testing Abnormal heat. Ball pressure test method
ISO/IEC Guide 50:2014 Safety aspects — Guidelines for child safety in standards and other specifications
CEI EN 61784-3-8 : 2012 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-8: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 8
BS IEC 82304-1 : 2016 HEALTH SOFTWARE - PART 1: GENERAL REQUIREMENTS FOR PRODUCT SAFETY
BS EN 60664-3:2017 Insulation coordination for equipment within low-voltage systems Use of coating, potting or moulding for protection against pollution
I.S. EN 60990:2016 METHODS OF MEASUREMENT OF TOUCH CURRENT AND PROTECTIVE CONDUCTOR CURRENT
CSA Z5359 : 2016 ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES, MEDICAL VACUUM, MEDICAL SUPPORT GASES, AND ANAESTHETIC GAS SCAVENGING SYSTEMS
CEI EN 50491-4-1 : 2014 GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 4-1: GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS)
CEI 62-143 : 2007 MAPPING BETWEEN THE CLAUSES OF THE THIRD EDITION OF IEC 60601-1 AND THE 1988 EDITION AS AMENDED
CEI EN 62570 : 2016 STANDARD PRACTICE FOR MARKING MEDICAL DEVICES AND OTHER ITEMS FOR SAFETY IN THE MAGNETIC RESONANCE ENVIRONMENT
I.S. EN IEC 62928:2018 RAILWAY APPLICATIONS - ROLLING STOCK - ONBOARD LITHIUM-ION TRACTION BATTERIES
I.S. EN 16310:2013 ENGINEERING SERVICES - TERMINOLOGY TO DESCRIBE ENGINEERING SERVICES FOR BUILDINGS, INFRASTRUCTURE AND INDUSTRIAL FACILITIES
I.S. EN 62052-31:2016 ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 31: PRODUCT SAFETY REQUIREMENTS AND TESTS
BS EN 62304 : 2006 MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE-CYCLE PROCESSES
I.S. EN 61784-3-8:2017 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-8: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 8
ISO 5359:2014 Anaesthetic and respiratory equipment Low-pressure hose assemblies for use with medical gases
S.R. CEN/TR 13387-1:2015 CHILD USE AND CARE ARTICLES - GENERAL SAFETY GUIDELINES - PART 1: SAFETY PHILOSOPHY AND SAFETY ASSESSMENT
I.S. EN 61069-7:2016 INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 7: ASSESSMENT OF SYSTEM SAFETY
IEC 60086-5 REDLINE : 4ED 2016 PRIMARY BATTERIES - PART 5: SAFETY OF BATTERIES WITH AQUEOUS ELECTROLYTE
IEC 60695-1-10 REDLINE : 2ED 2016 FIRE HAZARD TESTING - PART 1-10: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - GENERAL GUIDELINES
BS EN 60990:2000 Methods of measurement of touch current and protective conductor current
UNE-EN ISO 14798:2013 Lifts (elevators), escalators and moving walks - Risk assessment and reduction methodology (ISO 14798:2009)
I.S. EN 61513:2013 NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - GENERAL REQUIREMENTS FOR SYSTEMS (IEC 61513:2011 (EQV))
ISO 10393:2013 Consumer product recall — Guidelines for suppliers
UNE-EN 60695-2-12:2011 Fire hazard testing -- Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials
CAN/CSA-C22.2 NO. 61508-2:17 Functional safety of electrical/electronic/programmable electronic safety-related systems — Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (Adopted IEC 61508-2:2010, second edition, 2010-04, with Canadian deviations) | Sécurité fonctionnelle des systèmes électriques/électroniques/électroniques programmables relatifs à la sécurité — Partie 2 : Exigences pour les systèmes électriques/électroniques/électroniques programmables relatifs à la sécurité (norme IEC 61508-2:2010 adoptee, deuxième édition, 2010-04, avec exigences propres au Canada)
CSA C22.2 No. 60601.1 : 2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
EN 62368-1:2014/AC:2017-03 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED)
IEC TR 61508-0:2005 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 0: Functional safety and IEC 61508 (see Functional Safety and IEC 61508)
EN ISO 11930:2012 Cosmetics - Microbiology - Evaluation of the antimicrobial protection of a cosmetic product (ISO 11930:2012, Corrected version 2013-05-01)
DIN EN 13611:2016-09 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
UNI EN ISO 18113-1 : 2012 IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS
I.S. EN 61784-3-14:2010 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-14: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 14
UNE-EN 13611:2016 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
UNE-EN 50491-4-1:2013 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 4-1: General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS)
PREN 13611 : DRAFT 2017 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
UNE-EN 13060:2015 Small steam sterilizers
IEC 62281:2016 Safety of primary and secondary lithium cells and batteries during transport
UNE-EN 82079-1:2015 Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements
I.S. EN 60255-1:2010 MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 1: COMMON REQUIREMENTS
CEN/TR 15584:2007 Characterisation of sludges - Guide to risk assessment especially in relation to use and disposal of sludges
EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 : 2016 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
ISO 15194:2009 In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Requirements for certified reference materials and the content of supporting documentation
ASTM E 2363 : 2014 : REDLINE Standard Terminology Relating to Process Analytical Technology in the Pharmaceutical Industry
IEC TR 60825-14:2004 Safety of laser products - Part 14: A user's guide
IEC 61511-1:2016+AMD1:2017 CSV Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements
I.S. EN ISO 12100:2010 SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION
IEC 60730-1:2013+AMD1:2015 CSV Automatic electrical controls - Part 1: General requirements
ISO/TS 13131:2014 Health informatics Telehealth services Quality planning guidelines
I.S. EN 60707:1999 FLAMMABILITY OF SOLID NON-METALLIC MATERIALS WHEN EXPOSED TO FLAME SOURCES - LIST OF TEST METHODS
IEC 60664-3:2016 Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
I.S. EN 60086-4:2015 PRIMARY BATTERIES - PART 4: SAFETY OF LITHIUM BATTERIES
ISO/IEC Guide 63:2012 Guide to the development and inclusion of safety aspects in International Standards for medical devices
ISO 3534-2:2006 Statistics Vocabulary and symbols Part 2: Applied statistics
ISO 13824:2009 Bases for design of structures General principles on risk assessment of systems involving structures
I.S. EN 80416-1:2009 BASIC PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - PART 1: CREATION OF GRAPHICAL SYMBOLS FOR REGISTRATION
I.S. EN 62271-201:2014 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 201: AC SOLID-INSULATION ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV
I.S. EN 62366:2009 MEDICAL DEVICES - APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES
ISO 11930:2012 Cosmetics Microbiology Evaluation of the antimicrobial protection of a cosmetic product
IEC 60695-11-5 : 2.0 FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
IEC 61784-3-13:2016 Industrial communication networks - Profiles - Part 3-13: Functional safety fieldbuses - Additional specifications for CPF 13
I.S. EN 60695-1-30:2017 FIRE HAZARD TESTING - PART 1-30: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - PRESELECTION TESTING PROCESS - GENERAL GUIDELINES
IEC 62304:2006+AMD1:2015 CSV Medical device software - Software life cycle processes
IEC 62366:2007+AMD1:2014 CSV Medical devices - Application of usability engineering to medical devices
EN 61784-3-18:2011/A1:2017 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-18: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 18 (IEC 61784-3-18:2011/A1:2016)
ISO 11074:2015 Soil quality — Vocabulary
EN 60061-4:1992/A16:2018 LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY - PART 4: GUIDELINES AND GENERAL INFORMATION (IEC 60061-4:1990/A16:2018)
EN 61784-3-13:2017 Industrial communication networks - Profiles - Part 3-13: Functional safety fieldbuses - Additional specifications for CPF 13
DIN EN 13138-2:2015-02 Buoyant aids for swimming instruction - Part 2: Safety requirements and test methods for buoyant aids to be held
UNE-EN 80416-1:2011 Basic principles for graphical symbols for use on equipment -- Part 1: Creation of graphical symbols for registration
IEC 61140:2016 Protection against electric shock - Common aspects for installation and equipment
13/30277762 DC : 0 BS EN 60695-8-2 IEC 60695-8-2 ED 1.0 - FIRE HAZARD TESTING - PART 8-2: HEAT RELEASE - SUMMARY AND RELEVANCE OF TEST METHODS
IEC 61784-3-14:2010 Industrial communication networks - Profiles - Part 3-14: Functional safety fieldbuses - Additional specifications for CPF 14
UNE-EN 60695-1-21:2017 Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods
07/30091745 DC : 0 BS IEC 62368 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - SAFETY - REQUIREMENTS
IEC 61784-3:2016+AMD1:2017 CSV Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses - General rules and profile definitions
ISO 14698-2:2003 Cleanrooms and associated controlled environments Biocontamination control Part 2: Evaluation and interpretation of biocontamination data
IEC 82079-1:2012 Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements
BS EN 15198:2007 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
IEC 62271-201:2014 High-voltage switchgear and controlgear - Part 201: AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
BS EN 14459:2015 Safety and control devices for burners and appliances burning gaseous or liquid fuels. Control functions in electronic systems. Methods for classification and assessment
DD ISO/TS 22559-2:2010 Safety requirements for lifts (elevators) Safety parameters meeting the global essential safety requirements (GESRs)
DD ISO/TS 20100:2008 Gaseous hydrogen. Fuelling stations
02/714212 DC : DRAFT DEC 2002 IEC 62271-202 ED.1 - HIGH VOLTAGE/LOW VOLTAGE PREFABRICATED SUBSTATIONS
PD IEC/TR 60695-8-2:2008 Fire hazard testing Heat release. Summary and relevance of test methods
IEC 61010-1:2010+AMD1:2016 CSV Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
IEC 62209-2:2010 Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)
IEC 61784-3-1:2010 Industrial communication networks - Profiles - Part 3-1: Functional safety fieldbuses - Additional specifications for CPF 1
IEC 62271-200:2011 High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
BS EN 62271-202:2014 High-voltage switchgear and controlgear High-voltage/low-voltage prefabricated substation
PD IEC/TR 62354:2014 General testing procedures for medical electrical equipment
ISO 14630:2012 Non-active surgical implants General requirements
ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
IEC 62620:2014 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for use in industrial applications
BS EN 60730-1:2011 Automatic electrical controls for household and similar use General requirements
DIN EN ISO 11930:2013-10 COSMETICS - MICROBIOLOGY - EVALUATION OF THE ANTIMICROBIAL PROTECTION OF A COSMETIC PRODUCT (ISO 11930:2012, CORRECTED VERSION 2013-05-01)
DIN EN ISO 5840:2009-08 CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES
EN 61140:2016 Protection against electric shock - Common aspects for installation and equipment
EN 61513:2013 Nuclear power plants - Instrumentation and control important to safety - General requirements for systems
UNI EN 13138-2 : 2015 BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE HELD
EN 62079:2001 Preparation of instructions - Structuring, content and presentation
EN 60695-11-3:2012 Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods
EN 13138-2:2014 Buoyant aids for swimming instruction - Part 2: Safety requirements and test methods for buoyant aids to be held
IEC 60990:2016 RLV Methods of measurement of touch current and protective conductor current
EN 60695-7-1:2010 Fire hazard testing - Part 7-1: Toxicity of fire effluent - General guidance
EN 62620:2015 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for use in industrial applications
EN 61069-1:2016 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 1: Terminology and basic concepts
I.S. EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
DIN EN ISO 14698-2:2004-02 Cleanrooms and associated controlled environments - Biocontamination control - Part 2: Evaluation and interpretation of biocontamination data (ISO 14698-2:2003)
EN 60695-2-11:2014 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014)
EN 14459:2015 Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Methods for classification and assessment
IEC TS 60479-2:2017 RLV Effects of current on human beings and livestock - Part 2: Special aspects
CR 13455 : 1999 SOIL IMPROVERS AND GROWING MEDIA - GUIDELINES FOR THE SAFETY OF USERS, THE ENVIRONMENT AND PLANTS
CEN/TS 15277:2006 Non-active surgical implants - Injectable implants
CEN/TR 13387 : 2004 CHILD USE AND CARE ARTICLES - SAFETY GUIDELINES
EN 61000-1-2:2016 Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena
EN ISO 5840:2009 Cardiovascular implants - Cardiac valve prostheses (ISO 5840:2005)
EN 60255-1:2010 Measuring relays and protection equipment - Part 1: Common requirements
EN 60695-1-40:2014 Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids
EN 60398:2015 Installations for electroheating and electromagnetic processing - General performance test methods
EN 60446:2007 Basic and safety principles for man-machine interface, marking and identification - Identification of conductors by colours or alphanumerics
EN 50491-4-1:2012 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 4-1: General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS)
EN 61508-4:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations
EN ISO 13702:1999 Petroleum and natural gas industries - Control and migration of fires and explosions on offshore production installations - Requirements and guidelines (ISO 13702:1999)
IEC 60695-11-2:2017 Fire hazard testing - Part 11-2: Test flames - 1 kW pre-mixed flame - Apparatus, confirmatory test arrangement and guidance
EN 62209-2:2010 HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM HAND-HELD AND BODYMOUNTED WIRELESS COMMUNICATION DEVICES - HUMAN MODELS, INSTRUMENTATION, AND PROCEDURES - PART 2: PROCEDURE TO DETERMINE THE SPECIFIC ABSORPTION RATE (SAR) FOR WIRELESS COMMUNICATION DEVICES USED IN CLOSE PROXIMITY TO THE HUMAN BODY (FREQUENCY RANGE OF 30 MHZ TO 6 GHZ)
EN 62133:2013 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications
EN 61010-031:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test
EN 61508-1:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements
EN 50090-2-3:2005 Home and Building Electronic Systems (HBES) - Part 2-3: System overview - General functional safety requirements for products intended to be integrated in HBES
EN 60695-1-20 : 2016 Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance
EN 61508-3:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements
IEC 61326-3-2:2017 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment
EN 60695-8-1:2017 Fire hazard testing - Part 8-1: Heat release - General guidance
IEC 60695-11-5:2016 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
EN 60695-11-2:2017 Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance
EN 60695-10-3:2016 Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test
EN 60695-9-1:2013 FIRE HAZARD TESTING - PART 9-1: SURFACE SPREAD OF FLAME - GENERAL GUIDANCE (IEC 60695-9-1:2013)
UNE-EN ISO 10218-1:2012 Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robots (ISO 10218-1:2011)
DIN EN IEC 60728-11:2023-10 Cable networks for television signals, sound signals and interactive services – Part 11: Safety (IEC 60728-11:2023);
CEI EN IEC 61010-031:2023 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 031: Safety requirements for hand-held and hand-manipulated probe assemblies for electrical test and measurement
CEI EN 61800-5-2:2017 Adjustable speed electrical power drive systems Part 5-2: Safety requirements - Functional
CEI EN IEC 62061:2023 Safety of machinery - Functional safety of safety-related control systems
AAMI TIR57:2016(R2023) Principles for medical device security—Risk management
OVE/ONORM EN 62620 : 2015 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SECONDARY LITHIUM CELLS AND BATTERIES FOR USE IN INDUSTRIAL APPLICATIONS (IEC 62620:2014)

IEC GUIDE 109:2012 Environmental aspects - Inclusion in electrotechnical product standards
ISO 7010:2011 Graphical symbols Safety colours and safety signs Registered safety signs
ISO 31000:2009 Risk management Principles and guidelines
ISO/IEC Guide 14:2003 Purchase information on goods and services intended for consumers
AS 1337.0:2020 Personal protective equipment Eye and face protection - Vocabulary
ISO/IEC Guide 41:2003 Packaging Recommendations for addressing consumer needs
ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
ISO/IEC Guide 63:2012 Guide to the development and inclusion of safety aspects in International Standards for medical devices
ISO/TR 14121-2:2012 Safety of machinery — Risk assessment — Part 2: Practical guidance and examples of methods
ISO/IEC Guide 50:2014 Safety aspects — Guidelines for child safety in standards and other specifications
ISO/IEC Guide 37:2012 Instructions for use of products by consumers
ISO/IEC Guide 59:1994 Code of good practice for standardization
ISO 7001:2007 Graphical symbols — Public information symbols
IEC GUIDE 104:2010 The preparation of safety publications and the use of basic safety publications and group safety publications
ISO 22727:2007 Graphical symbols — Creation and design of public information symbols — Requirements
ISO/IEC Guide 71:2014 Guide for addressing accessibility in standards
ISO 10377:2013 Consumer product safety — Guidelines for suppliers
ISO/IEC Guide 2:2004 Standardization and related activities General vocabulary
ISO/IEC 17007:2009 Conformity assessment — Guidance for drafting normative documents suitable for use for conformity assessment
AS ISO 37100:2020 Sustainable cities and communities - Vocabulary
ISO/IEC Guide 46:2017 Comparative testing of consumer products and related services General principles
ISO 14971:2007 Medical devices Application of risk management to medical devices
ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
ISO/IEC Guide 74:2004 Graphical symbols — Technical guidelines for the consideration of consumers' needs
IEC 82079-1:2012 Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements
ISO Guide 64:2008 Guide for addressing environmental issues in product standards
ISO 15223-1:2016 Medical devices Symbols to be used with medical device labels, labelling and information to be supplied Part 1: General requirements
AS 19202.2:2021 Summer toboggan runs Safety requirements for operation (ISO 19202-2:2017 (ED.1.0) MOD)
IEC 62368-1:2014 Audio/video, information and communication technology equipment - Part 1: Safety requirements
ISO Guide 78:2008 Safety of machinery Rules for drafting and presentation of safety standards
ISO Guide 73:2009 Risk management — Vocabulary
ISO 14798:2009 Lifts (elevators), escalators and moving walks Risk assessment and reduction methodology
IEC GUIDE 116:2010 Guidelines for safety related risk assessment and risk reduction for low voltage equipment

View more information
£88.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.