JIS B 1054-2:2001
|
Mechanical properties of corrosion-resistant stainless-steel fasteners Part 2: Nuts
|
JIS B 1042:1998
|
Fasteners - Surface discontinuities - Part 2: Nuts
|
JIS B 1009:1991
|
Bolts, screws and studs - Nominal lengths, and thread lengths for general purpose bolts
|
JIS B 1051:2000
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs
|
JIS B 1013:1994
|
Countersunk head screws - Head configuration and gauging
|
JIS B 1052:1998
|
Mechanical properties of steel nuts
|
JIS B 0209-1:2001
|
ISO general purpose metric screw threads - Tolerances Part 1: Principles and basic data
|
JIS B 1053:1999
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners not under tensile stresses
|
JIS B 0209-3:2001
|
ISO general purpose metric screw threads -- Tolerances -- Part 3: Deviations for constructional screw threads Part 3: Deviations for constructional screw threads
|
JIS B 1059:2001
|
Drilling screws with tapping screw thread - Mechanical and functional properties
|
JIS B 1006:1985
|
Thread run-outs and thread undercuts for external threaded fasteners
|
JIS B 1012:1985
|
Cross recesses for screws
|
JIS B 1054-1:2001
|
Mechanical properties of corrosion-resistant stainless-steel fasteners Part 1: Bolts, screw and studs
|
JIS B 0209-5:2001
|
ISO general purpose metric screw threads - Tolerances Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
|
JIS B 1054-3:2001
|
Mechanical properties of corrosion-resistant stainless-steel fasteners Part 3: Set screws and similar fasteners not under tensile stress
|
JIS B 1046:2005
|
Fasteners - Non-electrolytically applied zinc flake coatings
|
JIS B 1003:2003
|
Fasteners - Ends of parts with exterenal ISO metric thread
|
JIS B 1092:2006
|
Fasteners - Quality assurance system
|
JIS B 1015:2008
|
Hexalobular internal driving feature for bolts and screws
|
JIS B 1021:2003
|
Tolerances for fasteners Part 1: Bolts, screws, studs and nuts - Product grades A, B and C
|
JIS B 1060:2003
|
Mechanical and performance requirements of case hardened and tempered metric thread rolling screws
|
JIS B 1091:2003
|
Fasteners - Acceptance inspection
|
JIS B 1044:2001
|
Fasteners - Electroplated coatings
|
JIS B 1041:1993
|
Fasteners - Surface discontinuities - Part 1: Bolts, screws and studs for general requirements
|
JIS B 1058:1995
|
Mechanical properties of fasteners Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
|
JIS B 1043:1993
|
Fasteners - Surface discontinuities - Part 3: Bolts, screws and studs for special requirements
|
JIS B 1057:2001
|
Mechanical properties of non-ferrous metal fasteners
|
JIS B 0209-4:2001
|
ISO general purpose metric screw threads -- Tolerances -- Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
|
JIS B 1002:1985
|
Dimensions of widths across flats
|
JIS B 0209-2:2001
|
ISO general purpose metric screw threads - Tolerances Part 2: Limits of sizes for general purpose external and internal screw threads - Medium quality
|
JIS B 1005:2003
|
General purpose bolts and screws - Metric series - Radii under the head
|