JIS Z 8402-2:1999
Current
The latest, up-to-date edition.
Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
Hardcopy , PDF
Japanese, English
30-09-1999
This part of JIS Z 8402, amplifies the general principles to be observed in designing experiments for the numerical estimation of the precision of measurement methods by means of a collaborative interlaboratory experiment; provides a detailed practical description of the basic method for routine use in estimating the precision of measurement methods; provides guidance to all personnel concerned with designing, performing or analyzing the results of the tests for estimating precision.
DocumentType |
Standard
|
Pages |
0
|
PublisherName |
Japanese Standards Association
|
Status |
Current
|
Supersedes |
Reaffirmed 2014 1999(R2014) [20/10/2014]1999(R2009) [01/10/2009]1999 [20/05/1999]
JIS Z 2510:2022 | Metallic powders -- Determination of particle size by dry sieving |
JIS Z 8101-2:1999 | Statistics - Vocabulary and symbols Part 2: Statistical quality control terms |
JIS Z 8402-1:1999 | Accuracy (trueness and precision) of measurement methods and results -- Part 1: General principles and definitions |
JIS Z 8101-1:1999 | Statistics - Vocabulary and symbols Part 1: Probability and general statistical terms |
JIS H 1611:2008 | Titanium And Titanium Alloys - General Rules For Chemical Analysis |
JIS Z 8404-2:2008 | Measurement Uncertainty - Part 2: Measurement Uncertainty For Metrological Applications - Repeated Measurements And Nested Experiments |
JIS K 0133:2007 | General rules for high frequency plasma mass spectrometry |
JIS Z 2616:2009 | General rules for determination of sulfur in metallic materials |
JIS B 8008-11:2008 | Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 11: Test-bed Measurement Of Gaseous And Particulate Exhaust Emissions From Engines Used In Nonroad Mobile Machinery Under Transient Test Conditions |
JIS K 2241:2000 | Cutting Fluid |
JIS K 7230:2007 | Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds (Indophenol method) |
JIS K 0050:2005 | General rules for chemical analysis |
JIS K 7142:2008 | Plastics - Determination of refractive index |
JIS A 1966:2005 | Indoor air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Pumped sampling |
JIS Z 8402-1:1999 | Accuracy (trueness and precision) of measurement methods and results -- Part 1: General principles and definitions |
JIS K 7243-3:2005 | Plastics - Epoxy resins - Determination of chlorine content- Part 3: Total chlorine Part 3: Total chlorine |
JIS K 7367-2:1999 | Plastics - Determination Of The Viscosity Of Polymers In Dilute Solution Using Capillary Viscometers - Part 2: Poly (vinyl Chloride) Resins |
JIS Z 8402-5:2002 | Accuracy (trueness and precision) of measurement methods and results Part 5: Alternative methods for the determination of the precision of a standard measurement method |
JIS K 7146:2006 | Plastics - Epoxy Resins - Determination Of 1,2-glycol Content |
JIS H 1699:2006 | Methods for ICP emission spectrometric analysis of tantalum |
JIS Z 8405:2008 | Statistical Methods For Use In Proficiency Testing By Interlaboratory Comparisons |
JIS K 6256:1999 | Adhesion Testing Methods For Rubber, Vulcanized Or Thermoplastic |
JIS M 8813:2004 | Coal and coke - Determination of constituents |
JIS Q 0033:2002 | Uses of certified reference materials |
JIS G 1217:2005 | Iron And Steel - Methods For Determination Of Chromium Content |
JIS Z 8402-4:1999 | Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method |
JIS K 7375:2008 | Plastics - Determination Of Total Luminous Transmittance And Reflectance |
JIS K 7252-3:2008 | Plastics - Determination Of Average Molecular Mass And Molecular Mass Distribution Of Polymers Using Size-exclusion Chromatography - Part 3: Low-temperature Method |
JIS M 8812:2004 | Coal and coke - Methods for proximate analysis |
JIS K 0144:2001 | Surface chemical analysis - Glow discharge optical emission spectrometry (GD-OES) - Introduction to use |
JIS K 7380:1999 | Plastics - Homopolymer And Copolymer Resins Of Vinyl Chloride - Determination Of Residual Vinyl Chloride Monomer - Gas Chromatographic Method |
JIS Z 0311:2004 | Metallic blast-cleaning abrasives |
JIS K 2520:2000 | Petroleum Products - Lubricating Oils - Determination Of Water Separability |
JIS K 7236:2001 | Testing Methods For Epoxy Equivalent Of Epoxide Resins |
JIS K 7373:2006 | Plastics - Determination Of Yellowness Index And Change Of Yellowness Index |
JIS C 9913:2008 | Measuring Method Of Volatile Organic Compounds And Carbonyl Compounds Emissions For Electronic Equipment - Chamber Method |
JIS Z 8402-6:1999 | Accuracy (trueness and precision) of measurement methods and results Part 6: Use in practice of accuracy values |
JIS Z 8404-1:2006 | Measurement uncertainty Part 1: Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation |
JIS Z 2615:2009 | General rules for determination of carbon in metallic materials |
JIS K 0148:2005 | Surface chemical analysis - Determination of surface elemental contamination on silicon wafers by total-reflection X-ray fluorescence (TXRF) spectroscopy |
JIS K 7340:2006 | Plastics - Vertical Flame Spread Determination For Film And Sheet |
JIS K 7242-2:2008 | Plastic - Smoke generation Part 2 : Determination of optical density by a single-chamber test |
JIS G 1201:2001 | Iron and steel - General rules for analytical methods |
JIS Z 8462-4:2006 | Capability of detection Part 4: Methodology for comparing the minimum detectable value with a given value |
JIS Z 8462-3:2006 | Capability Of Detection - Part 3: Methodology For Determination Of The Critical Value For The Response Variable When No Calibration Data Are Used |
JIS H 1611:2001 | Titanium And Titanium Alloys - General Rules For Chemical Analysis |
JIS M 8514:2003 | Metallurgical Grade Fluorspar - Methods For Chemical Analysis |
JIS K 7243-1:2005 | Plastics -- Epoxy resins -- Determination of chlorine content -- Part 1: Inorganic chlorine |
JIS K 7341:2006 | Plastics - Determination Of Burning Behaviour Of Thin Flexible Vertical Specimens In Contact With A Small-flame Ignition Source |
JIS K 7201-2:2007 | Plastics - Determination Of Burning Behaviour By Oxygen Index - Part 2: Ambient-temperature Test |
JIS Z 8402-3:1999 | Accuracy (trueness and precision) of measurement methods and results -- Part 3: Intermediate measures of the precision of a standard measurement method Part 3: Intermediate measures of the precision of a standard measurement method |
JIS K 2301:2008 | Fuel gases and natural gas - Methods for chemical analysis and testing |
JIS K 0143:2000 | Surface Chemical Analysis - Secondary Ion Mass Spectrometry - Determination Of Boron Atomic Concentration In Silicon Using Uniformly Doped Materials |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.