MIL-DTL-16232 Revision G:2000
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Phosphate Coating, Heavy, Manganese or Zinc Base
Available format(s)
PDF
Published date
07-01-2000
Publisher
Superseded date
16-09-2021
Superseded by
£13.91
Excluding VAT
Covers two types of heavy phosphate coating for ferrous metals, applied by immersion. Coatings consist of phosphate or zinc phosphate base and when specified a supplementary treatment.
| DevelopmentNote |
Supersedes DOD P 16232 (F). (03/2000) G NOTICE 1 - Notice of Validation. (04/2013) G NOTICE 2 - Notice of Validation. (01/2018)
|
| DocumentType |
Standard
|
| Pages |
19
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This specification covers two types of heavy phosphate coating for ferrousmetals, applied by immersion. The coatings consist of a manganese phosphate or zinc phosphate base and, when specified, a supplementary treatment (see 6.1). For all types and classes, unless contraindicated on drawings or contract, materials containing hexavalent chromium should not be permitted on coated end items.
| MIL-DTL-32371-8 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 90 Degree Elbow, Bulkhead |
| MIL-DTL-32460-3 Base Document:2013 | Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, 37 Degree Flare, Male to ORFS Male |
| MIL-DTL-32480-2 Base Document:2014 | Fitting, Adapter, 45 Degree Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Male |
| MIL-DTL-32480-1 Base Document:2014 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless Male to ORFS Male |
| MIL-DTL-32372-4 Revision A:2017 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, NPTF Male to ORFS Bulkhead |
| MS51819 Revision E:1987 | Adapter, Straight, Pipe to Tube Male Pipe End, Flareless Type, Hydraulic |
| MS51510 Revision D:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, Tee |
| MS51525 Revision B:1988 | Fittings, Hydraulic Tube, Flared 37 Degree and Flareless, Steel; Adapter, Straight, Tube to Boss, O-Ring, 37 Degree Flared |
| MS39210 Revision K:2018 | Nuts, Tube Coupling - Safety Sleeve Compression Type |
| MIL-DTL-32480-5 Base Document:2014 | Fitting, Adapter, 45 Degrees Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Bulkhead |
| MIL-DTL-52471-10 Revision B:2008 | Hose Assemblies, Rubber, Hydraulic Pressure-Type, Type 100R12 Four-Spiral-Wrap Reinforcement Hose |
| MIL-DTL-52525-35 Revision B:2008 | Fittings, Hose, Screw-on to 4-Bolt Split-Flange, 45 Degree Bent Tube |
| MS51814 Revision E:1987 | Nipple, Tube,Regular Hex, Flareless Type, Hydraulic |
| MIL-DTL-32371-10 Base Document:2012 | Fittings, Hydraulic Tube, Sleeve, Double Angle |
| MIL-DTL-32371-4 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Tee, Spherical on Branch |
| MIL-DTL-52525-10 Revision D:2011 | Fittings, Hose, Screw-on to 4-Bolt Split-Flange, Straight |
| MIL-DTL-32372-12 Revision A:2017 | Fitting, Adapter, Tee, Hydraulic and Pneumatic, NPTF Male on Branch to ORFS Male Run to Run |
| SAE J2295_201611 | Fastener Part Standard - Cap Screws, Hex, Heavy Hex and Heavy Hex Structural Bolts, and Hex Nuts (Inch Dimensioned) |
| MS51519 Revision C:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, Nipple, Tube, Large Hex, for Use with O-Ring |
| MIL-DTL-32480-4 Base Document:2014 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless Male to ORFS Bulkhead |
| MIL-DTL-83796-10 Revision A:2014 | Hose Assembly, Rubber, Light Weight, Internal Support Coil, Medium Pressure, Field Attachable End Fittings, Flare to Flare |
| MIL-DTL-52525-7 Revision D:2011 | Fittings, Hose, Screw-on to 37 Degrees Flare Female Swivel, 90 Degrees Bent Tube, Short Drop |
| MIL-DTL-32464-6 Base Document:2013 | Male Adapted, Union Cross, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 37 Degrees Spherical on Branch, 1500-3000 PSI |
| MIL-DTL-32480 Base Document:2014 | Adapter, Hydraulic and Pneumatic, Flareless Tube Fitting to ORFS Connectors, 1500 to 3000 PSI and Minus 65 Degrees Fahrenheit to Plus 250 Degrees Fahrenheit, General Specification for |
| MIL-DTL-32464-1 Base Document:2013 | Male Adapter, Straight, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| MIL-DTL-32464-12 Base Document:2013 | Male Adapter, Tee, 37 Degrees Spherical to ANPT, ANPT on Branch, 1500-3000 PSI |
| MIL-DTL-83796-11 Revision A:2014 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flare to Flare, with Lockwire Hole |
| MS35758 Revision D:2012 | Cups, Grease, Manual Feed |
| SAE AS5272E | Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification |
| MIL-W-13855 Revision D:1973 | Weapons: Small Arms and Aircraft Armament Subsystems, General Specification for |
| MIL-PRF-32316 Base Document:2008 | Rifle, 7.62MM: Semi-Automatic Sniper System (SASS) - M110 |
| MS39199 Revision G:2012 | Nipple, Tube-Safety Sleeve Compression Type, Bulkhead Mounting |
| MIL-DTL-5002 Revision E:2011 | Surface Treatments and Inorganic Coatings for Metal Surfaces of Weapons Systems |
| MS51825 Revision H:2008 | Sleeves, Clinches, Tube Fitting, Flareless Type, Hydraulic |
| MIL-DTL-52525-32 Revision A:2008 | Fittings, Hose, Reinforced Hydraulic Hose and Clamp-Halves: Field Attachable (Reusable), Screw-on to 37 Degree Flare Female Swivel, 45 Degree Bent Tube, for use with Type 100RE Four-Spiral-Wrap Reinforcement Hose |
| MS51811 Revision E:1987 | Tee, Tube, Flareless Type Hydraulic |
| MS51534 Revision A:1979 | Reducer, Tube, 37 Degrees Flared |
| MIL-DTL-52525-44 Base Document:2008 | Fittings, Hose, Crimp Type, Split-Flange, 45 Degree Bent Tube |
| MIL-DTL-32480-6 Base Document:2014 | Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS Bulkhead |
| MIL-DTL-32372-8 Revision A:2017 | Fitting, Adapter, 45 Degree, Hydraulic and Pneumatic, NPTF Male to ORFS Female Swivel |
| MIL-DTL-32372-9 Revision A:2017 | Fitting, Adapter, 90 Degree, Hydraulic and Pneumatic, NPTF Male to ORFS Female Swivel |
| MIL-DTL-52525-11 Revision C:2008 | Fittings, Hose, Screw-On to 4-Bolt Split-Flange, 45 Degree Bent Tube |
| MS51501 Revision C:2016 | Fittings, Hydraulic, 37 Degree Flared, Short Nipple Tube, Regular Hex |
| MIL-DTL-52525-1 Revision D:2011 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, Straight, SAE-J516 Type, for Assembly with SAE-J517, Type 100R2 Hose |
| MS51521 Revision C:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, 90 Degree Elbow, Swivel |
| MS51528 Revision B:1988 | Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, Steel; Elbow, Tube to Boss, 45 Degree, O-Ring, 37 Degree Flared |
| MS51816 Revision E:1987 | Adapter, Straight, Pipe to Tube, Female Pipe End, Flareless Type, Hydraulic |
| MIL-DTL-32371-3 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 90 Degrees Elbow |
| MIL-DTL-52525-43 Base Document:2008 | Fittings, Hose, Crimp Type, Split-Flange, Straight |
| MIL-DTL-32372-7 Revision A:2017 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, NPTF Male to ORFS Female Swivel |
| MIL-DTL-32372-6 Revision A:2017 | Fitting, Adapter, 90 Degree Male, Hydraulic and Pneumatic, NPTF to ORFS Bulkhead |
| MIL-DTL-32371-6 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Nipple Tube, Regular Hex, Long |
| MIL-DTL-32372 Revision A:2016 | Fitting, Adapter, Hydraulic and Pneumatic, NPTF to ORFS Connectors, 1500 to 3000 PSI and -65°F to 250°F |
| MS51524 Revision C:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, Tee, Tube To Swivel, Swivel on Branch |
| MS51502 Revision C:2016 | Fittings, Hydraulic, 37 Degree Flared, Long Nipple Tube, Regular Hex |
| MS39212 Revision K:2018 | Sleeves, Compression, Tube-Hose Fitting-Safety Sleeve Type |
| MS51514 Revision D:2017 | Fittings, Hydraulic Tube, Flared 37 Degree Tee, Tube to Female Pipe on Run |
| MS51503 Revision C:2016 | Fittings, Hydraulic, 37 Degree Flared, Straight Adapter, Female Pipe End to Tube |
| AN 6270 : 0010 | HOSE ASSEMBLY - DETACHABLE SWIVEL FITTING, LOW PRESSURE |
| MS51532 Revision B:1988 | Fittings, Hydraulic Tube, Flared 37 Degree and Flareless, Steel; Cap, Tube, 37 Degree Flared |
| MIL-DTL-32372-2 Revision A:2017 | Fitting, Adapter, 45 DegreesElbow, Hydraulic and Pneumatic, NPTF Male to ORFS Male |
| MIL-DTL-32480-7 Base Document:2014 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel |
| MS51520 Revision C:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, Nipple, Bulkhead |
| MIL-DTL-16356 Revision E:2013 | Gauges, Direct Reading, Oblong Glass |
| MIL-PRF-32327 Base Document:2009 | Rifle, Caliber .50:Sniper W/Day Optic Sight and Carrying Cases - M107 |
| MIL-DTL-83796-4 Revision C:2014 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flareless to Flareless with Lockwire Hole |
| MIL-DTL-45912 Revision B:2013 | Bolt, Self-Locking, Hexagon Head, Steel |
| MIL-DTL-52471-1 Revision C:2008 | Hose Assemblies, Rubber, Hydraulic Pressure-Type, Type 1001R1, Single-Wire Braided Reinforcement Hose |
| MIL-DTL-52525-6 Revision C:2008 | Fittings,Hose, Screw-on to 37 Degree Flare Female Swivel, 45Degree BentTube |
| MS51507 Revision D:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, Bulkhead, 90 Degree Elbow |
| MS51508 Revision D:2017 | Fittings, Hydraulic Tube, Flared 37 Degree 45 Degree Elbow, Male Pipe to Tube |
| MS51516 Revision C:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, Tee, Bulkhead on Run |
| MIL-DTL-32371-9 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Tee, Bulkhead, Spherical on Run |
| MIL-DTL-52525-36 Revision B:2008 | Fittings, Hose, Crimp Type, Split-Flange 90 Degree Bent Tube |
| MIL-DTL-52525-15 Revision C:2008 | Fittings, Hose, Screw-On to 4-Bolt Split-Flange, 90 Degree Bent Tube |
| SAE J2655_201509 | Fastener Part Standard - Washers and Lockwashers (Inch Dimensioned) |
| MIL-STD-419 Revision E:2010 | Cleaning, Protecting, and Testing Piping, Tubing, and Fittings for Hydraulic Power Transmission Equipment |
| MIL-DTL-14072 Revision F:2013 | Finishes for Ground Based Electronic Equipment |
| MIL-DTL-70329 Revision A:2009 | Nut, Plain, Round, Ball and Roller Bearings, Metric, General Specification for |
| FF-S-85 Revision D:2005 | Screw, Cap, Slotted and Hexagon Head |
| AN924 Revision 14:2018 | Nut, Tube, Bulkhead and Universal Fitting (For new design, use SAE-AS5178) |
| MIL-DTL-32460-8 Base Document:2013 | Fitting, Adapter, 45 Degree Elbow, Hydraulic and Pneumatic, 37 Degree Flare, Male to ORFS, Female Swivel |
| MS35759 Revision C:2008 | Cups, Grease, Automatic Feed |
| MIL-DTL-32464-7 Base Document:2013 | Male Adapter, 45 Degrees Elbow, Bulkhead, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| MS39207 Revision H:2018 | Elbows, Tube - Safety Sleeve Compression Type, 90 Degree |
| MIL-DTL-32464-2 Base Document:2013 | Male Adapter, 45 Degrees Elbow, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| MIL-DTL-32464-4 Base Document:2013 | Male Adapter, Tee, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 37 Degrees Spherical on Branch, 1500-3000 PSI |
| MIL-DTL-32464-8 Base Document:2013 | Male Adapter, 90 Degrees Elbow, Bulkhead, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| MS51300 Revision F:2011 | Cap, Fuel Tank: Combat Vehicles, Spill-Proof |
| MIL-DTL-52525-13 Revision C:2008 | Fittings, Hose, Crimp Type, Split-Flange Straight |
| MIL-DTL-32464-10 Base Document:2013 | Male Adapter, Long, Nipple Tube, Hydraulic and Pneumatic Tube, Long Hex, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| MS20760 Revision D:2013 | Adapter, Straight, Flange to Tube |
| MIL-DTL-32371 Base Document:2012 | Fittings, Adapter, Hydraulic and Pneumatic, Spherical to ORFS Connectors, 1500 to 3000 PSI, General Specification for |
| MIL-DTL-32460-5 Base Document:2013 | Fitting, Adapter, 45 Degree Elbow, Hydraulic and Pneumatic, 37 Degree Flare, Male to ORFS Bulkhead |
| MIL-DTL-32460-7 Base Document:2013 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, 37 Degree Flare, Male to ORFS, Female Swivel |
| MIL-DTL-32464-5 Base Document:2013 | Male, Adapter, Nipple Tube, Hydraulic and Pneumatic, Regular Hex, 37 Degrees Spherical to NPTF, 1500-3000 PSI |
| SAE J2596_201308 | Fastener Part Standard - Tapping Screws and Metallic Drive Screws (Inch Dimensioned) |
| MIL-STD-186 Revision F:2002 | Manufacturing Process Protective Finishingfor Army Missile Weapon Systems |
| MIL-DTL-52525-5 Revision D:2011 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, Straight |
| MIL-DTL-52525-34 Revision B:2008 | Fittings, Hose, Screw-on to 4-Bolt Split-Flange, Straight |
| MIL-DTL-52525-2 Revision C:2008 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 45 Degree Bent Tube |
| MIL-DTL-18866 Revision J:2015 | Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, General Specification for |
| MS39202 Revision G:2012 | Elbows, Pipe to Tube - Safety Sleeve Compression Type, 90 Degree, Male Pipe End |
| MS39201 Revision G:2012 | Nipple, Tube-Safety Sleeve Compression Type |
| MIL-PRF-46010 Revision H:2013 | Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738 |
| MIL-DTL-32460-1 Base Document:2013 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, 37 Degree Flare, Male to ORFS Male |
| MS20762 Revision D:2016 | Elbow, Flared Tube, Flanged, Swivel, 90 Degree |
| MIL-DTL-45585 Revision E Interim Revision:2004 | Link, Cartridge - Metallic Belt, 40 Millimeter - M16A2 |
| MIL-DTL-6193 Revision E:2017 | Joints, Universal, Plain, Light and Heavy Duty, General Specification for |
| MS39324 Revision C:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, Adapter to 45 Degree O-Ring Boss |
| MIL-STD-171 Revision F:2011 | Finishing of Metal and Wood Surfaces |
| MS51842 Revision E:2017 | Fittings, Hydraulic Tube, Flareless Type, 45 Degree Elbow, Tube To Boss, O-Ring |
| MIL-DTL-62011-1 Base Document:2009 | Pump, Fuel, Electrically-Operated: 24-Volt DC, In-Tank Type, Top-Mounted Connector, Type I |
| MIL-PRF-46147 Revision D:2008 | Lubricant, Solid Film, Air Cured, Corrosion Inhibiting |
| MIL-DTL-83798-5 Revision E:2017 | Fittings, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, 45 Degrees |
| MIL-DTL-32460 Revision A:2017 | Adapter, Hydraulic and Pneumatic, 37 Degree Flare Tube Fitting to O-Ring Face Seal Connectors, 1500 to 3000 PSI and -65 Degree F to 250 Degree F, General Specification for |
| MIL-DTL-83798 Revision D:2008 | Fitting, Rubber Hose, Lightweight, Medium Pressure, General Specification For |
| MIL-DTL-83796-1 Revision C:2014 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flare to Flare |
| MIL-DTL-32460-6 Base Document:2013 | Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, 37 Degree Flare, Male to ORFS Bulkhead |
| MIL-DTL-52525-38 Revision B:2008 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 45 Degree Bent Tube |
| MS51531 Revision B:1985 | Nut, Tube Coupling, 37 Degree Flared |
| MIL-DTL-83796-13 Base Document:2008 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flareless to Flareless, with Lockwire Hole |
| MS51512 Revision D:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, Tee, Tube to Male Pipe on Branch |
| MIL-DTL-52525-3 Revision D:2011 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 90 Degree Bent Tube, Short Drop |
| MS39322 Revision B:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, Adapter, Female Swivel to Weld Socket, 3/4 Inch to 1 Inch |
| MIL-DTL-32464-11 Base Document:2013 | Male Adapter, Bulkhead, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| MIL-DTL-32464 Revision A:2017 | Fittings, Adapter, Hydraulic and Pneumatic, 37 Degrees Spherical to ANPT Connectors, 1500 to 3000 PSI, General Specification for |
| MS51533 Revision A:1979 | Fittings, Hydraulic Tube, Flared 37 Degree, Sleeve, Compression, Tube Fitting |
| MS51526 Revision A:1979 | Fittings, Hydraulic Tube, Flared 37 Degree, Adapter, Straight (Long), Tube to Boss, O-Ring |
| MS20756 Revision F:2011 | Flange, Swivel, Retaining |
| MS51530 Revision B:1988 | Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, Steel; Tee, Tube to Boss, Boss on Run, O-Ring, 37 Degree Flared |
| MIL-DTL-32372-11 Revision A:2017 | Fitting, Adapter, Tee, Hydraulic and Pneumatic, ORFS Male to ORFS Female Swivel to NPTF Male on Branch |
| MIL-DTL-52525-9 Revision C:2008 | Fittings, Hose, Screw-On to 37 Degree Flare Female Swivel, Straight |
| MIL-DTL-83796-3 Revision C:2014 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flareless to Flareless |
| MS20761 Revision C:2016 | Elbow, Flared Tube, Flanged, Swivel, 45 Degree |
| SAE J2656_201611 | Fastener Part Standard - Hexagon Socket, Square Head, and Slotted Headless Set Screws - Inch Dimensioned |
| MIL-DTL-52525-17 Revision C:2008 | Fittings, Clamp-Halves, Flange to Port, for 4-Bolt Split-Flange |
| MIL-DTL-52525-40 Revision B:2008 | Fittings, Hose, Crimp Type, Split-Flange, Straight |
| MIL-DTL-52525-31 Revision B:2008 | Fittings, Hose, Screw-on to 37 Degree Flare, Female Swivel |
| MIL-DTL-21248 Revision D:2015 | Ring, Retaining (Tapered and Reduced Section Type) |
| MIL-DTL-52525 Revision F:2008 | Fittings, Hose, Hydraulic, Reusable, Field-Attachable and Clamp-Halves, to Mate with SAE-J517 Type Hoses, General Specification for |
| MIL-DTL-20277 Revision K:2014 | Knife, Combat; and Sheath, General Specification for |
| MIL-DTL-32480-8 Base Document:2014 | Fitting, Adapter, 45 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel |
| MIL-DTL-32460-4 Base Document:2013 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, 37 Degree Flare, Male to ORFS Bulkhead |
| MS51522 Revision C:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, 45 Degree Elbow, Swivel |
| MIL-DTL-32372-5 Revision A:2017 | Fitting, Adapter, 45 Degree, Hydraulic and Pneumatic, NPTF Male to ORFS Bulkhead |
| MIL-DTL-32464-3 Base Document:2013 | Male Adapter, 90 Degrees Elbow, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| MIL-DTL-32372-10 Revision A:2017 | Fitting, Adapter, Tee, Hydraulic and Pneumatic, ORFS Female Run to Run to NPTF Male on Branch |
| MS22064 Revision C:2014 | Clamp - Hose |
| MIL-DTL-32480-3 Base Document:2014 | Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Male |
| MIL-DTL-52471-8 Revision B:2008 | Hose Assemblies, Rubber: Hydraulic Pressure-Type; Type 100RE |
| MIL-DTL-32460-9 Base Document:2013 | Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, 37 Degree Flare, Male to ORFS, Female Swivel |
| MIL-DTL-32464-9 Base Document:2013 | Male Adapter, Tee, Bulkhead, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 37 Degrees Spherical on Run, 1500-3000 PSI |
| MS51818 Revision E:1987 | Tee, Pipe to Tube, Male Pipe on Branch, Flareless Type, Hydraulic |
| MIL-DTL-32371-1 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Straight |
| MIL-DTL-52525-16 Revision D:2008 | Fittings, Clamp-Halves, for 4-Bolt Split-Flange, SAE-J518-1or SAE-J518-2, Type Split-Flange Clamp (SFC) |
| MS27404 Revision C:2017 | Adapter, Straight, Reusable, Tube to Hose, Low Pressure |
| MIL-DTL-52471-2 Revision C:2008 | Hose Assemblies, Rubber: Hydraulic Pressure-Type; Type 100R2, Double-Wire Braided Reinforcement Hose |
| MIL-DTL-52525-37 Revision B:2008 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, Straight |
| MIL-DTL-52471-3 Revision C:2008 | Hose Assemblies, Rubber, Hydraulic Pressure-Type, Type 100RE, Four-Wire Braided Reinforcement or Multiple Wire Braided Steel Wire Reinforced Hose |
| MS51841 Revision E:2017 | Fittings, Hydraulic Tube, Flareless Type, Tee, Tube To Boss On Branch, O-Ring |
| SAE J2484_201212 | Fastener Part Standard - Machine Screws |
| MS51517 Revision C:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, Cross |
| MIL-DTL-32372-1 Revision A:2017 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, NPTF Male to ORFS Male |
| MIL-DTL-32480-9 Base Document:2014 | Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel |
| MIL-DTL-32371-7 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 45 Degrees Elbow, Bulkhead |
| MIL-DTL-32371-5 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Union Cross, Spherical on Branch |
| MS51500 Revision F:2017 | Fittings, Hydraulic Tube, Flared 37 Degree and Flareless, Adapter, Straight, Male Pipe End to Tube |
| MS51505 Revision C:2016 | Fittings, Hydraulic Tube, Flared 37 Degree, 90 Degree Elbow |
| SAE J2485_201212 | Fastener Part Standard - Machine Screw Nuts (Metric and Inch) |
| MIL-DTL-52525-45 Base Document:2008 | Fittings, Hose, Crimp Type, Split-Flange, 90 Degree Bent Tube |
| MIL-DTL-52525-8 Revision C:2008 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 90 DegreeBent Tube, Long Drop |
| MS51513 Revision D:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, Tee, Tube to Female Pipe on Branch |
| MIL-DTL-32371-2 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 45 Degrees Elbow |
| MS51527 Revision D:2000 | Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, Steel; Elbow, Tube to Boss, 90 Degree, O-Ring, 37 Degree Flared |
| MS51506 Revision E:2017 | Fittings, Hydraulic Tube, Flared 37 Degree and Flareless, Elbow, Pipe to Tube, 90 Degree, Female Pipe End, 37 Degree Flared |
| MIL-DTL-52525-39 Revision B:2008 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 90 Degree Bent Tube |
| MS39323 Revision C:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, Tube, Reducer |
| MS51815 Revision F:1987 | Elbow Pipe to Tube 90 Degree, Male Pipe End, Flareless Type, Hydraulic |
| MS51523 Revision C:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, Tee, Tube To Swivel, Swivel On Run |
| MIL-DTL-52525-14 Revision C:2008 | Fittings, Hose Crimp Type, Split-Flange 45 Degree Bent |
| MIL-DTL-83796-12 Base Document:2008 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flareless to Flareless |
| MS51518 Revision C:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, Plug, Machine Thread |
| MS51812 Revision F:1987 | Nipple, Tube, Bulkhead, Flareless Type Hydraulic |
| MS51515 Revision D:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, Tee, Bulkhead on Branch |
| MIL-DTL-52525-42 Revision B:2008 | Fittings, Hose, Crimp Type, Split-Flange 90 Degree Bent |
| MIL-DTL-52525-41 Revision A:2008 | Fittings, Hose, Crimp Type, Split-Flange, 45 Degrees Bent Tube |
| MS51817 Revision E:1987 | Elbow, Pipe to Tube, 45 Degree Male Pipe End, Flareless Type, Hydraulic |
| MS51820 Revision E:1987 | Elbow, Tube, 90 Degree, Flareless Type, Hydraulic |
| MS51511 Revision D:2017 | Fittings, Hydraulic Tube, Flared 37 Degree, Tee, Tube to Male Pipe on Run |
| MS51813 Revision E:1987 | Elbow, Pipe to Tube 90 Degree, Female Pipe End, Flareless Type, Hydraulic |
| MIL-DTL-83798-2 Revision D:2017 | Fittings, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel Nut, 45 Degrees |
| MIL-DTL-52525-12 Revision D:2011 | Fittings, Hose, Screw on to Split-Flange 90 Degree Bent |
| MIL-DTL-32460-2 Base Document:2013 | Fitting, Adapter, 45 Degree Elbow, Hydraulic and Pneumatic, 37 Degree Flare, Male to ORFS Male |
| MIL-DTL-52525-33 Revision A:2008 | Fittings, Wire Reinforced Hydraulic Hose and Clamp-Halves: Field Attachable (Reusable), Screw-on to 37 Degree Flare Female Swivel, 90 Degree Bent Tube, for use with Type 100RE Four-Spiral-Wrap Reinforcement Hose |
| MIL-DTL-21338 Revision B:2014 | Washer, Key Retaining, Ball and Roller Bearings |
| MS51509 Revision D:2017 | Fittings, Hydraulic Tube, Flared 37 Degree 45 Degree Elbow, Bulkhead |
| MIL-DTL-52525-4 Revision D:2011 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 90 Degree Bent Tube, Long Drop |
| MIL-DTL-62011 Revision E:2009 | Pump, Fuel, Electrically-Operated: 24-Volt DC, In-Tank Type, General Specification for |
| MIL-DTL-83798-6 Revision D:2017 | Fittings, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, 90 Degrees |
| MIL-DTL-32372-3 Revision A:2017 | Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, NPTF Male to ORFS Male |
| MS51504 Revision C:2016 | Fittings, Hydraulic, 37 Degree Flared, 90 Degree Elbow, Male Pipe End to Tube |
| MS51529 Revision B:1988 | Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, Steel; Tee, Tube to Boss, Boss on Branch, O-Ring |
| MIL-DTL-62011-2 Base Document:2009 | Pump, Fuel, Electrically-Operated: 24-Volt DC, In-Tank Type, Side-Mounted Connector, Type II |
| MIL-DTL-83796-2 Revision C:2014 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flare to Flare, with Lockwire Hole |
| MIL-DTL-83798-1 Revision D:2017 | Fittings, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel Nut, Straight |
| MIL-DTL-83798-3 Revision D:2017 | Fittings, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel Nut, 90 Degrees |
| NASA STD 6012 : 2012 | CORROSION PROTECTION FOR SPACE FLIGHT HARDWARE |
| MIL-PRF-3150 Revision E:2008 | Lubricating Oil, Preservative, Medium |
| MIL-PRF-16173 Revision E:1993 | Corrosion Preventive Compound, Solvent Cutback, Cold-Application |
Summarise
£13.91
Excluding VAT
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.