MIL-DTL-21097 Revision H:2017
Current
The latest, up-to-date edition.
Connectors, Electrical, Printed Wiring Board, General Purpose General Specification for
01-02-2017
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Describes the multicontact connectors for 1/16, 3/32, and 1/8 inch printed wiring boards, and for interconnections between printed wiring boards.
| DevelopmentNote |
Supersedes MIL C 21097 (E). (10/2005)
|
| DocumentType |
Standard
|
| Pages |
57
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers multicontact connectors for 1/16, 3/32, and 1/8 inch printed wiring boards, and for interconnections between printed wiring boards. The connectors are intended to provide a reliable connection between printed wiring and conventional wiring. The interconnector concept is intended to provide connection of printed wiring on one board to printed wiring on another board.
| MIL-DTL-21097-16 Revision F:2005 | Connectors, Electrical, Printed Wiring Board Contact, Crimp, Removable, Type CR |
| MIL-STD-1353 Revision C:2014 | Electrical Connectors, Plug-in Sockets and Associated Hardware, Selection and Use of |
| MIL-HDBK-454 Revision B:2007 | General Guidelines for Electronic Equipment |
| MIL-DTL-21097-15 Revision G:2005 | Connectors, Electrical, Printed Wiring Board Male Adapter, Contact Spacing: 0.200, Alternate Dual Row, Type CS, Blade Contact (No Mounting Provision) |
| MIL-DTL-21097-13 Revision C:2005 | Connectors, Electrical, Printed Wiring Board Composite, Receptacle, Contact Spacing: 0.200, Alternate Dual Row, Type CR, Removable Contact |
| MIL-PRF-22710-12 Revision G:2007 | Switches, Code Indicating Wheel (Printed Circuit), (Thumbwheel Switch Assembly, Sealed Modules, Illuminated or Non-Illuminated), (Top Relampable), Style SRPC12 |
| MIL-DTL-21097-4 Revision G:2008 | Connectors, Electrical, Printed Wiring Board Composite, Receptacle, Contact Spacing (.200) Alternate Dual Row, Type CR |
| MIL-DTL-21097-17 Revision E:2005 | Connectors, Electrical, Printed Wiring Board Contact, Solder, Removable, Type CR |
| MIL-DTL-21097-18 Revision D:2005 | Connectors, Electrical, Printed Wiring Board Tool, Contact, Removal, for Type CR Connector Contacts |
| MIL-DTL-21097-5 Revision G:2008 | Connectors, Electrical, Printed Wiring Board Male Adapter, Contact Spacing (.200) Alternate Dual Row, Type CS |
| MIL-DTL-21097-14 Revision F:2005 | Connectors, Electrical, Printed Wiring Board Male Adapter, Contact Spacing: 0.200, Alternate Dual Row, Type CS, Blade Contact (Mounting Provision A) |
| MIL-DTL-21097-3 Revision F:2005 | Connectors, Electrical, Printed Wiring Board Composite, Adapter, Contact Spacing (.200) Individual Contacts, Type CS |
| MIL-DTL-21097-2 Revision F:2005 | Connectors, Electrical, Printed Wiring Board Composite, Receptacle, Contact Spacing (.200) Single Row, Type CR |
| MIL-DTL-21097-19 Revision D:2005 | Connectors, Electrical, Printed Wiring Board Blade Simulator for Measuring Engagement and Separation Forces for Type CR Contacts |
| MIL-DTL-21097-11 Revision J:2005 | Connectors, Electrical, Printed Wiring Board Keys, Polarizing |
| SAE AMSQQP416E | Plating, Cadmium (Electrodeposited) |
| MIL-DTL-45204 Revision D:2007 | Gold Plating, Electrodeposited |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| MIL-STD-202-210 Base Document:2015 | Method 210, Resistance to Soldering Heat |
| SAE AMS2418J | Plating, Copper |
| MIL-STD-889 Revision C:2016 | Galvanic Compatibility of Electrically Conductive Materials |
| MIL-DTL-14072 Revision F:2013 | Finishes for Ground Based Electronic Equipment |
| IPC 2221B:2012 | GENERIC STANDARD ON PRINTED BOARD DESIGN |
| ASTM D 5927 : 2017 : REDLINE | Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods |
| MIL-DTL-16878 Revision H:2012 | Wire, Electrical, Insulated, General Specification for |
| MIL-DTL-22520 Revision G:1997 | Crimping Tools, Wire Termination, General Specification for (S/S by SAE-AS22520) |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| ASTM B 194 : 2015 : REDLINE | Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar |
| SAE AMS2700E | Passivation of Corrosion Resistant Steels |
| SAE AMS2403M | Plating, Nickel General Purpose |
| MIL-STD-202-208 Base Document:2015 | Method 208, Solderability |
| MIL-M-24519 Revision E:1992 | Molding Plastics, Electrical, Thermoplastic |
| MIL-STD-202 Revision H:2015 | Electronic and Electrical Component Parts |
| SAE AMSP81728B | Plating, Tin-Lead (Electrodeposited) |
| MIL-STD-1285 Revision D:2004 | Marking of Electrical and Electronic Parts |
| ASTM A 342/A342M : 2014 : REDLINE | Standard Test Methods for Permeability of Weakly Magnetic Materials |
| EIA 557 : 2006 | STATISTICAL PROCESS CONTROL SYSTEMS |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.