• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

MIL-DTL-9490 Revision E:2008

Current
Current

The latest, up-to-date edition.

FLIGHT CONTROL SYSTEMS - DESIGN, INSTALLATION AND TEST OF PILOTED AIRCRAFT, GENERAL SPECIFICATION FOR
Available format(s)

PDF

Language(s)

English

1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
ALPHABETICAL INDEX

Specifies general performance, design, develop, and quality assurance requirements for the flight control systems of manned piloted aircraft.

Committee
FSC 15GP
DevelopmentNote
Inactive for New Design. Supersedes MIL F 9490 (D). (05/2008)
DocumentType
Standard
Pages
98
ProductNote
NEW CHILD NOT 1 2019 IS NOW ADDED
PublisherName
US Military Specs/Standards/Handbooks
Status
Current
Supersedes

DEFSTAN 00-970(PT1)SEC3/15(2015) : 2015 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 3: STRUCTURE
DEFSTAN 00-970(PT0)/9(2012) : 2012 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/7(2011) : 2011 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/14(2014) : 2014 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/12(2014) : 2014 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/13(2014) : 2014 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/11(2013) : 2013 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/8(2011) : 2011 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/10(2013) : 2013 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT1)SEC3/12(2014) : 2014 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 3: STRUCTURE
DEFSTAN 00-970(PT1)SEC3/13(2014) : 2014 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 3: STRUCTURE
DEFSTAN 00-970(PT1)SEC3/14(2015) : 2015 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 3: STRUCTURE

MIL-A-8865 Revision B:1987 AIRPLANE STRENGTH AND RIGIDITY MISCELLANEOUS LOADS
MIL-DTL-18375H: 2005 WIRE ROPE, FLEXIBLE, CORROSION-RESISTING, NONMAGNETIC, FOR AIRCRAFT CONTROL
MIL-PRF-7958 Revision D:2013 PUSH-PULL CONTROLS, FLEXIBLE AND RIGID
SAE AMS A 21180 : 2011 ALUMINUM-ALLOY CASTINGS, HIGH STRENGTH
SAE AMS 5676 : 2011 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 80NI - 20CR
MIL-I-8500 Revision D:1980 INTERCHANGEABILITY AND REPLACEABILITY OF COMPONENT PARTS FOR AEROSPACE VEHICLES
MIL-STD-1530 Revision D:2016 AIRCRAFT STRUCTURAL INTEGRITY PROGRAM (ASIP)
SAE AS 8976 : 2012 BEARINGS, PLAIN, SELF-ALIGNING, ALL METAL, GENERAL SPECIFICATION FOR
SAE AS 15002 : 2010 FITTING, LUBRICATION, HYDRAULIC, SURFACE CHECK, STRAIGHT THREADS, STEEL, TYPE 2
MIL-F-8785 Revision C:1980 FLYING QUALITIES OF PILOTED AIRPLANES
MS33736 Revision D:2002 TURNBUCKLE ASSEMBLIES, CLIP LOCKING OF
MIL-STD-704 Revision F:2004 AIRCRAFT ELECTRIC POWER CHARACTERISTICS
SAE AS 81820 : 2014 BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LOW SPEED OSCILLATION
MIL-STD-130 Revision N:2007 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
MIL-H-8890 Base Document:1961 HYDRAULIC COMPONENTS, TYPE 111 [65 DEGREES TO PLUS 450 DEGREES F] GENERAL SPECIFICATION FOR [ASG]
MIL-DTL-781 Revision J:2014 TERMINAL, WIRE ROPE SWAGING, GENERAL SPECIFICATION FOR
NASM33588:2010 NUT, SELF-LOCKING, AIRCRAFT, RELIABILITY AND MAINTAINABILITY USAGE REQUIREMENTS FOR
SAE AMS 2175 : 2010 CASTINGS, CLASSIFICATION AND INSPECTION OF
SAE ARP 1281 : 2002 ACTUATORS: AIRCRAFT FLIGHT CONTROLS, POWER OPERATED, HYDRAULIC, GENERAL SPECIFICATION FOR
SAE AS 7949 : 2004 BEARINGS, BALL, AIRFRAME, ANTIFRICTION, GENERAL STANDARD
MIL-M-7997 Revision C:1981 MOTOR, AIRCRAFT HYDRAULIC, CONSTANT DISPLACEMENT GENERAL SPECIFICATION FOR
MIL-DTL-83420 Revision P:2017 WIRE ROPE, FLEXIBLE, FOR AIRCRAFT CONTROL, GENERAL SPECIFICATION FOR
MIL-STD-810 Revision G:2008 ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
MIL-H-8891 Revision A:1978 HYDRAULIC SYSTEMS, MANNED FLIGHT VEHICLES TYPE 111 DESIGN, INSTALLATION AND DATA REQUIREMENTS FOR, GENERAL SPECIFICATION FOR
MIL-A-87229 Base Document:1985 AUXILIARY POWER SYSTEMS, AIRBORNE
DOT/FAA/AR-MMPDS-01 : 20030131 METALLIC MATERIALS PROPERTIES DEVELOPMENT AND STANDARDIZATION (MMPDS)
MIL-DTL-6193 Revision E:2017 JOINTS, UNIVERSAL, PLAIN, LIGHT AND HEAVY DUTY, GENERAL SPECIFICATION FOR
MIL-A-8870 Revision C:1993 AIRPLANE STRENGTH AND RIGIDITY VIBRATION, FLUTTER, AND DIVERGENCE
SAE AMS A 22771 : 2012 ALUMINUM ALLOY FORGINGS, HEAT TREATED
MIL T 5677 : B THIMBLE, WIRE CABLE, AIRCRAFT
MIL-M-38510 Revision J:1991 MICROCIRCUITS, SPECIFICATION FOR
SAE AS 5440 : 2011 HYDRAULIC SYSTEMS, AIRCRAFT, DESIGN AND INSTALLATION REQUIREMENTS FOR
NASM 25049 : REV 1 KNOBS, CONTROL, ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR
MIL-HDBK-454 Revision B:2007 GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT
SAE AS 6038 : 2011 BEARINGS, BALL, BELLCRANK, ANTIFRICTION, AIRFRAME
MIL E 5400 : T ELECTRONIC EQUIPMENT, AEROSPACE, GENERAL SPECIFICATION FOR
MIL-STD-7080 Base Document:1994 SELECTION & INSTALLATION OF AIRCRAFT ELECTRIC EQUIPMENT
SAE AMS 4965 : 2014 TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6.0AL 4.0V, SOLUTION HEAT TREATED AND AGED
SAE AS 56761 : 1999 SPLICING; CABLE TERMINAL, PROCESS FOR, AIRCRAFT
NASM33540:2003 SAFETY WIRING, SAFETY CABLING, COTTER PINNING, GENERAL PRACTICES FOR
MIL-STD-464 Revision C:2010 ELECTROMAGNETIC ENVIRONMENTAL EFFECTS REQUIREMENTS FOR SYSTEMS
NEMA WC 27500 : 2015 STANDARD FOR AEROSPACE AND INDUSTRIAL ELECTRICAL CABLE
MIL-DTL-6117 Revision L:2008 WIRE ROPE ASSEMBLIES, AVIATION, SWAGED TYPE
MIL-PRF-5503 Revision G:2013 ACTUATORS: AERONAUTICAL LINEAR UTILITY, HYDRAULIC, GENERAL SPECIFICATION FOR
SAE AS 8879 : 2004 SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER
MS33572 Revision C:1968 INSTRUMENT, PILOT, FLIGHT, BASIC, STANDARD ARRANGEMENT FOR HELICOPTERS
SAE AS 6039 : 2009 BEARINGS, BALL, ROD END, DOUBLE ROW, SELF-ALIGNING
MIL-M-8609 Revision B:1965 MOTOR, DC 28 VOLT SYSTEM AIRCRAFT, GENERAL SPECIFICATION FOR
MIL-STD-461 Revision G:2015 REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT
NASM33602:2011 BOLTS, SELF-RETAINING, AIRCRAFT, RELIABILITY AND MAINTAINABILITY, DESIGN AND USAGE REQUIREMENTS FOR
SAE ARP 1961 : 2016 GEARBOX - AIRFRAME MOUNTED ACCESSORY
MIL-DTL-8878 Revision L:2014 TURNBUCKLES, POSITIVE SAFETYING, GENERAL SPECIFICATION FOR
MIL-A-8867 Revision C:1987 AIRPLANE STRENGTH AND RIGIDITY GROUND TESTS
MIL-DTL-7034 Revision F:2005 PULLEYS, GROOVE, ANTIFRICTION BEARING, GREASE LUBRICATED, AIRCRAFT, GENERAL SPECIFICATION FOR
MIL-A-8861 Revision B:1986 AIRPLANE STRENGTH AND RIGIDITY FLIGHT LOADS
FAA AC 120-29 : 0 CRITERIA FOR APPROVAL OF CATEGORY 1 AND CATEGORY 2 WEATHER MINIMA FOR APPROACH
SAE AS 8775 : 1998 HYDRAULIC SYSTEM COMPONENTS, AIRCRAFT AND MISSILES, GENERAL SPECIFICATION FOR
MIL-A-8866 Revision C:1987 AIRPLANE STRENGTH AND RIGIDITY RELIABILITY REQUIREMENTS, REPEATED LOADS, FATIGUE AND DAMAGE TOLERANCE
SAE AS 35411 : 2010 FITTINGS, LUBRICATION
SAE ARP 988 : 2016 ELECTROHYDRAULIC MECHANICAL FEEDBACK SERVOACTUATORS
SAE AS 50881 : 2015 WIRING AEROSPACE VEHICLE
MIL-M-7969 Revision C:1965 Motors, Alternating Current, 400-Cycle, 115/200-Volt System, Aircraft, General Specification for
JSSG-2009 Revision A:2013 Air Vehicle Subsystems
MIL-STD-1472 Revision G:2012 HUMAN ENGINEERING
NASM24665:2016 PIN, COTTER (SPLIT)
SAE AMS F 7190 : 2016 FORGING, STEEL, FOR AIRCRAFT/AEROSPACE EQUIPMENT AND SPECIAL ORDNANCE APPLICATIONS
MIL-HDBK-838 Base Document:1997 LUBRICATION OF MILITARY EQUIPMENT
NASM15981:2010 FASTENERS, EXTERNALLY THREADED, SELF-LOCKING DESIGN AND USAGE LIMITATIONS FOR
SAE ARP 490 : 2008 ELECTROHYDRAULIC SERVOVALVES
MIL-P-8564 Revision D:1970 PNEUMATIC SYSTEM COMPONENTS, AERONAUTICAL, GENERAL SPECIFICATION FOR [ASG]
NAS 516:2015 FITTING, LUBRICATION, .1250 INCH DRIVE, FLUSH TYPE
JSSG-2006 Base Document:1998 JOINT SERVICE SPECIFICATION GUIDE - AIRCRAFT STRUCTURES
MIL-HDBK-17-1 Revision F:2002 COMPOSITE MATERIALS HANDBOOK - VOLUME 1: POLYMER MATRIX COMPOSITES GUIDELINES FOR CHARACTERIZATION OF STRUCTURAL MATERIALS
MIL-A-8860 Revision B:1987 AIRPLANE STRENGTH AND RIGIDITY GENERAL SPECIFICATION FOR
MIL-STD-1553 Revision B:1978 DIGITAL TIME DIVISION COMMAND/RESPONSE MULTIPLEX DATA

View more information
£16.70
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.