MIL-H-5440 Revision H:1993
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Hydraulic Systems, Aircraft, Design and Installation Requirements for (S/S by SAE-AS5440)
Available format(s)
PDF
Published date
25-05-1993
Publisher
Superseded date
01-04-1998
Superseded by
£13.91
Excluding VAT
Gives requirements for types I and II hydraulic systems as follows; -54deg to +71degC (-65deg to +160degF), and -54deg to +135degC (-65deg to +275degF) temperature range.
| DocumentType |
Standard
|
| Pages |
51
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy |
This specification covers the design and installation requirements for Types I and II aircraft hydraulic systems.
| DEFSTAN 00-970(PT1)SEC6/10(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
| DEFSTAN 00-970(PT1)SEC6/9(2012) : 2012 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6 - EQUIPMENT |
| MIL-I-83294 Base Document:1971 | Installation Requirement, Aircraft Propulsion Systems, General Specification for (No S/S Document) |
| DEFSTAN 00-970(PT1)SEC6/15(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
| MIL P 5516 : C | PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, 160 DEGREES F |
| DEFSTAN 00-970(PT1)SEC6/13(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
| MIL C 25427 : A | COUPLING ASSEMBLY, HYDRAULIC, SELF-SEALING, QUICK DISCONNECT |
| MIL-V-29592 Base Document:1993 | VALVE, AIR VENT, AUTOMATIC, HYDRAULIC, LOW PRESSURE TYPE II SYSTEMS, GENERAL SPECIFICATION FOR |
| MIL V 81940 : B | VALVE, SAMPLING AND BLEED, HYDRAULIC, TYPE LI SYSTEMS |
| MIL F 8815 : D | FILTER AND FILTER ELEMENTS, FLUID PRESSURE, HYDRAULIC LINE, 15 MICRON ABSOLUTE AND 5 MICRON ABSOLUTE, TYPE 11 SYSTEMS; GENERAL SPECIFICATION FOR |
| DEFSTAN 00-970(PT1)SEC6/14(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
| DEFSTAN 00-970(PT7)SEC7/1(2006) : 2006 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 7: ROTORCRAFT - SECTION 7: INSTALLATIONS |
| DEFSTAN 00-970(PT1)SEC6/16(2016) : 2016 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
| DEFSTAN 00-970(PT1)SEC6/12(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
| MIL F 83861 : B | FILTER ELEMENTS, NONCLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 5 AND 15 MICRON ABSOLUTE, TYPE 1I, SYSTEMS GENERAL SPECIFICATION FOR |
| DEFSTAN 00-970(PT7)SEC2/SUPP6/6(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 7: ROTORCRAFT - SUPPLEMENT 6: EQUIPMENT (SUBPART F) |
| MIL-C-8603 Revision B:1984 | Clamps, Loop Type, and Straps, Support |
| DEFSTAN 00-970(PT0)/9(2012) : 2012 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/7(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-H-8775 Revision D:1976 | Hydraulic System Components, Aircraft and Missiles General Specification for (S/S by SAE-AS8775) |
| DEFSTAN 00-970(PT0)/11(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/8(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL V 5523 : D | VALVE, RELIEF, HYDRAULIC PRESSURE |
| DEFSTAN 00-970(PT0)/10(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL F 9490 : D | FLIGHT CONTROL SYSTEMS - DESIGN, INSTALLATION AND TEST OF PILOTED AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL F 5508 : B | FUSE, AIRCRAFT AUTOMATIC QUANTITY MEASURING HYDRAULIC |
| DEFSTAN 00-970(PT1)SEC6/11(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
| MIL-H-8891 Revision A:1978 | Hydraulic Systems, Manned Flight Vehicles, Type III Design, Installation and Data Requirements for, General Specification for |
| MIL-V-19067 Revision A:1957 | VALVE, CHECK, CONTROLLABLE, HYDRAULIC, AIRCRAFT TYPE 11 SYSTEMS |
| DEFSTAN 00-970(PT7)SEC2/SUPP6/5(2015) : INTERIM | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 7: ROTORCRAFT - SUPPLEMENT 6: EQUIPMENT (SUBPART F) |
| MIL-A-19736 Revision A:1960 | Air Refueling Systems, General Specification for |
| MIL-R-8931 Revision A:1994 | Reservoirs,Aircraft and Missile, Hydraulic, Separated Type |
| MIL-P-5994 Revision D:1972 | Pump Units, Hydraulic, Electric Motor Driven, Variable Delivery, General Specification for (No S/S Document) |
| MIL V 6164 : E | VALVE, AIRCRAFT, AIR HIGH PRESSURE |
| MIL-T-5522 Revision D:1975 | Test Requirementsand Methodsfor Aircraft Hydraulicand Emergency Pneumatic Systems (S/S By MIL-STD-5522) |
| MIL-S-8512 Revision D:1974 | Support Equipment, Aeronautical, Special, General Specification for the Design of |
| MIL-T-26017 Revision C:1972 | TEST STAND, HYDRAULIC SYSTEM COMPONENTS, TYPE MK-3A (STAND, TEST, AIRCRAFT HYDRAULIC SYSTEM, ELECTRIC MOTOR DRIVEN, TYPE MK-3A) (NO S/S DOCUMENT) |
| MIL F 83860 : C | FILTER ELEMENTS, NONCLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 5 MICRON ABSOLUTE, TYPE II, SYSTEMS, GENERAL SPECIFICATION FOR |
| MIL V 19068 : A | VALVE, SHUTTLE, HYDRAULIC, AIRCRAFT, TYPE 11 SYSTEMS |
| MIL B 8075 : D | BRAKE CONTROL SYSTEMS, ANTI SKID, AIRCRAFT WHEELS, INSTRUCTIONS FOR PREPARATION OF |
| DEFSTAN 00-970(PT1)SEC6/8(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6 - EQUIPMENT |
| SAE AIR4713A | Aerospace - Chlorinated Solvent Contamination of MIL-H-5606/MIL-H-83282 Vehicle Hydraulic Systems |
| SAE AS5994A | Pump Units, Hydraulic, Electric Motor Driven, Variable Delivery |
| SAE AIR4922A | Primary Flight Control Hydraulic Actuation System Interface Definition |
| SAEITC TS103-2 | TS103 Recommendations for Design Considerations for Aircraft Hydraulic Systems |
| MIL-V-5527 Revision A:1951 | VALVES, AIRCRAFT, HYDRAULIC THERMAL EXPANSION RELIEF |
| MIL-S-8812 Revision D:1975 | Steering System, Aircraft General Requirements for |
| DEFSTAN 00-970(PT7)SEC7/3(2010) : 2010 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 7: ROTORCRAFT - SECTION 7: INSTALLATIONS |
| DEFSTAN 00-970(PT1)SEC6/6(2010) : 2010 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
| SAE AS4251 | Coupling Assemblies, Non-Locking Probe Style, Self-Aligning, Self-Sealing Disconnects |
| MIL-T-7081 Revision D:1965 | TUBE, ALUMINUM ALLOY, SEAMLESS, ROUND, DRAWN 6061, AIRCRAFT HYDRAULIC QUAL ITY (S/S BY SAE-AMS-T-7081) |
| MIL-I-8673 Base Document:1955 | Installation and Test of Aircraft Flexible Weapons Systems (No S/S Document) |
| MIL-P-19692 Revision E:1994 | PUMPS, HYDRAULIC, VARIABLE FLOW, GENERAL SPECIFICATION FOR (S/S BY SAE-AS19692) |
| MIL-F-5509 Revision D:1978 | Fitting, Flared Tube, Fluid Connection (see Notice 2 for Additional Superseding Information) |
| MIL I 18373 : B | INSTRUMENT AND NAVIGATION EQUIPMENT, AIRCRAFT, INSTALLATION OF |
| MIL PRF 46821 : C | LOADER-TRANSPORTER, GUIDED MISSILE - XM501E3 (IMPROVED HAWK) |
| MIL-R-5520 Revision C:1964 | RESERVOIRS, AIRCRAFT, HYDRAULIC, NON-SEPARATED TYPE (NO S/S DOCUMENT) |
| MIL-P-5238 Revision C:1974 | Pump, Centrifugal, Fuel Booster, Aircraft, General Specification For |
| MIL-P-87175 Base Document:1982 | PACKING, PREFORMED, PETROLEUM, HYDRAULIC FLUID RESISTANT, PHOSPHONITRILIC FLUOROELASTOMER |
| DEFSTAN 00-970(PT7)SEC7/2(2007) : 2007 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 7: ROTORCRAFT - SECTION 7: INSTALLATIONS |
| SAE AS6026A | Control Unit, Pressure Generating, Manually Operated, Aircraft Hydraulic Brake System |
| MIL-V-19069 Revision B:1986 | Valve, Check, Hydraulic, Aircraft, Type II Systems |
| SAE AS1896A | Coupling Assembly, Self-Sealing, One Side Only, Hydraulic |
| DEFSTAN 00-970(PT1)SEC6/5(2007) : 2007 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: COMBAT AIRCRAFT - SECTION 6: EQUIPMENT |
| MIL-W-5013 Revision L:1991 | Wheel and Brake Assemblies, Aircraft General Specification For |
| MIL-DTL-46821 Revision D:1998 | Loader-Transporter, Guided Missile: XM501E3 (Improved Hawk) |
| SAE ARP1897 | Clamp Selection and Installation Guide |
| SAE AS25427 | Coupling Assembly, Hydraulic, Self-Sealing, Quick Disconnect |
| MIL A 5503 : E | ACTUATOR, AERONAUTICAL LINEAR UTILITY, HYDRAULIC, GENERAL SPECIFICATION FOR |
| MIL-P-83461 Revision B:1980 | PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, IMPROVED PERFORMANCE AT 275 DEG. F (135 DEG. C) (S/S BY SAE-AMS-P-83461) |
| MIL A 5498 : D | ACCUMULATORS, HYDRAULIC, CYLINDRICAL 3000 PSI, AIRCRAFT |
| DIN 9370:1985-04 | AEROSPACE; TUBES; CLASSIFICATION, PRESSURE TERMS, CALCULATION AND DESIGN CRITERIA |
| DEFSTAN 00-970(PT1)SEC6/7(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
| DIN 65178-1:1985-12 | AEROSPACE; CONFIGURATION AND INSTALLATION OF FLUID PIPELINES; SURVEY AND DEFINITIONS |
| MIL R 25532 : A | ROCKET MOTOR, AERONAUTICAL, QUALIFICATION TEST FOR |
| MIL-C-18244 Revision A:1962 | Control and Stabilization Systems: Automatic, Piloted Aircraft, General Specification for |
| SAE AIR4543C | Aerospace Hydraulics and Actuation Lessons Learned |
| SAE AS838A | Aircraft Hydraulic Starter/Pumps |
| MIL-T-5522 Revision D:1975 | Test Requirementsand Methodsfor Aircraft Hydraulicand Emergency Pneumatic Systems (S/S By MIL-STD-5522) |
| MIL-R-83248 Revision C:1994 | RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT (S/S BY SAE-AMS7276, SAE-AMS7259, SAE-AMS3216, AND SAE-AMS3218) |
| SAE AS4396B | FITTING END, BULKHEAD, FLARED, TUBE CONNECTION, DESIGN STANDARD |
| MIL F 83296 : 0 | FITTING, TETRAFLUOROETHYLENE HOSE, HIGH TEMPERATURE, HIGH PRESSURE (3,000 PSI HYDRAULIC AND PNEUMATIC) |
| MIL V 81940 : B | VALVE, SAMPLING AND BLEED, HYDRAULIC, TYPE LI SYSTEMS |
| SAE ARP603G | Impulse Testing of Hydraulic Hose, Tubing, and Fittings Assemblies |
| MIL H 46170 : B | HYDRAULIC FLUID, RUST INHIBITED, FIRE-RESISTANT, SYNTHETIC HYDROCARBON BASE |
| MIL-F-8785 Revision C:1980 | Flying Qualities of Piloted Airplanes |
| MIL F 81836 : A SUPP 1 | FILTER AND DISPOSABLE ELEMENT, FLUID PRESSURE, HYDRAULIC, 3 MICRON ABSOLUTE |
| SAE AS1975G | Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000/4000 psi, 275 °F, Standard Duty, Hydraulic, Aircraft Systems |
| MIL-STD-1844 Base Document:1984 | GAS CHROMATOGRAPHY METHOD FOR DETERMINATION OF TRACE CHLORINATED SOLVENTS IN HYDRAULIC FLUID (NO S/S DOCUMENT) |
| MIL H 83298 : A | HOSE, TETRAFLUOROETHYLENE, HIGH TEMPERATURE, HIGH PRESSURE (3000 PSI) HYDRAULIC AND PNEUMATIC |
| SAE ARP4146C | Coiled Tubing – Titanium Alloy, Hydraulic Applications, Aerospace |
| MIL-T-6845 Revision D:1985 | TUBING, STEEL, CORROSION-RESISTANT (S30400), AEROSPACE VEHICLE HYDRAULIC SYSTEM 1/8 HARD CONDITION (S/S BY SAE-AMS-T-6845) |
| SAE ARP4553A | Aerospace - Accumulator, Hydraulic, Self-Displacing |
| SAE AS4201A | PORT - RING LOCKED FLUID CONNECTION TYPE, 8000 PSI DESIGN STANDARD |
| MIL H 27267 : B | HOSE TETRAFLUOROETHYLENE, HIGH TEMPERATURE, MEDIUM PRESSURE |
| MIL-C-85449-1 Revision B:1987 | CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, NBR RUBBER, 321 CRES, 275 DEG. F, FUEL RESISTANT, GENERAL PURPOSE |
| MIL J 5513 : C | JOINT, HYDRAULIC SWIVEL |
| MIL C 25427 : A | COUPLING ASSEMBLY, HYDRAULIC, SELF-SEALING, QUICK DISCONNECT |
| MIL-M-7997 Revision C:1981 | Motor, Aircraft Hydraulic, Constant Displacement General Specification for |
| MIL-R-83485 Base Document:1976 | RUBBER, FLUOROCARBON ELASTOMER, IMPROVED PERFORMANCE AT LOW TEMPERATURES (S/S BY SAE-AMS-R-83485) |
| SAE AS1300D | PORT - RING LOCKED FLUID CONNECTION TYPE STANDARD DIMENSIONS FOR |
| MIL V 19068 : A | VALVE, SHUTTLE, HYDRAULIC, AIRCRAFT, TYPE 11 SYSTEMS |
| MIL-H-8891 Revision A:1978 | Hydraulic Systems, Manned Flight Vehicles, Type III Design, Installation and Data Requirements for, General Specification for |
| MIL H 25579 : E | HOSE ASSEMBLY, TETRAFLUOROETHYLENE, HIGH TEMPERATURE MEDIUM PRESSURE, GENERAL REQUIREMENTS FOR |
| MIL-C-85449-3 Revision B:1987 | CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, SILICONE FABRIC, REINFORCED 321 CRES, 500 DEG. F, GENERAL PURPOSE |
| MIL-V-5525 Revision C:1959 | Valves, Aircraft Power Brake |
| MIL-B-8584 Revision C:1970 | Brake Systems, Wheel, Aircraft, Design of |
| MS14169 Revision C:1980 | Circular Spline and Adapter Details Engine Driven Accessories |
| SAE AMS5561G | Steel, Corrosion and Heat-Resistant, Welded and Drawn or Seamless and Drawn Tubing 9.0Mn - 20Cr - 6.5Ni - 0.28N High-Pressure Hydraulic |
| MS27595 Revision E:2006 | Retainer, Packing Backup, Continuous Ring, Polytetrafluoroethylene |
| MIL S 9395 : F | SWITCHES, PRESSURE, [ABSOLUTE, GAGE AND DIFFERENTIAL] GENERAL SPECIFICATION FOR |
| MIL-V-5527 Revision A:1951 | VALVES, AIRCRAFT, HYDRAULIC THERMAL EXPANSION RELIEF |
| MIL-P-83461-2 Base Document:1991 | PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT IMPROVED PERFORMANCE AT 275 DEG. F (135 DEG. C) FOR USE IN BOSS FITTINGS, SIZES AND TOLERANCES (S/S BY SAE-AMS-P-83461/2) |
| MIL-STD-2069 Base Document:1961 | REQUIREMENTS FOR AIRCRAFT NONNUCLEAR SURVIVABILITY PROGRAM (S/S BY MIL-HDBK-2069) |
| MIL F 27272 : B | FITTING, TETRAFLUOROETHYLENE HOSE, HIGH TEMPERATURE, MEDIUM PRESSURE, GENERAL REQUIREMENTS FOR |
| MS33656 Revision J:1987 | FITTING END, STANDARD DIMENSIONS FOR FLARED TUBE CONNECTION AND GASKET SEAL (S/S BY SAE-AS4395) |
| MIL-F-8815-6 Revision B:1976 | Filter Elements, Noncleanable, Fluid Pressure, Hydraulic Line, 3000 PSI, 5 Micron Absolute, -65 Degree to +275 Degree Fahrenheit |
| MIL-P-5994 Revision D:1972 | Pump Units, Hydraulic, Electric Motor Driven, Variable Delivery, General Specification for (No S/S Document) |
| MIL-F-85720 Base Document:1985 | FITTING, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE, DYNAMIC BEAM, SEAL, GENERAL SPECIFICATION FOR |
| MIL F 9490 : D | FLIGHT CONTROL SYSTEMS - DESIGN, INSTALLATION AND TEST OF PILOTED AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-G-5514 Revision G:1993 | Gland Design; Packings, Hydraulic, General Requirements for |
| MIL-R-8791 Revision D:1982 | Retainer, Packing, Hydraulic, and Pneumatic, Tetrafluoroethylene Resin (S/S by SAE-AS8791) |
| SAE ARP994B | Design of Tubing Installations for Aerospace Hydraulic Systems |
| MIL H 83282 : C | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, AIRCRAFT, METRIC, NATO CODE NUMBER H 537 |
| MIL V 25675 : B | VALVE, CHECK, MINIATURE, HYDRAULIC, AIRCRAFT AND MISSILE |
| MS33583 Revision C:1993 | TUBING END DOUBLE FLARE, STANDARD DIMENSIONS FOR (S/S BY SAE-AS33583) |
| SAE AMS4945F | Titanium Alloy Tubing, Seamless, Hydraulic 3Al - 2.5V, Controlled Contractile Strain Ratio Cold Worked, Stress Relieved |
| SAE ARP 1192 : B1987 (R1991) | PROCEDURE FOR CALIBRATION AND VERIFICATION OF LIQUIDBORNE PARTICLE COUNTER - AN ABSOLUTE STANDARD |
| MIL-H-8775 Revision D:1976 | Hydraulic System Components, Aircraft and Missiles General Specification for (S/S by SAE-AS8775) |
| MIL-STD-2089 Base Document:1981 | AIRCRAFT NONNUCLEAR SURVIVABILITY TERMS (NO S/S DOCUMENT, SEE MIL-HDBK-2089 FOR GUIDANCE) |
| MS33584 Revision C:1990 | TUBING END STANDARD DIMENSIONS FOR FLARED (S/S BY SAE-AS4330) |
| SAE AIR4057B | Secondary Filters for Fluid System Reliability |
| MIL-STD-1472 Revision G:2012 | Human Engineering |
| MIL C 85052/1 : B | CLAMP, LOOP TUBE 17-7 PH CRES, 275 DEG., F, FUEL AND PETROLEUM BASED HYDRAULIC FLUID RESISTANT |
| MIL F 8815 : D | FILTER AND FILTER ELEMENTS, FLUID PRESSURE, HYDRAULIC LINE, 15 MICRON ABSOLUTE AND 5 MICRON ABSOLUTE, TYPE 11 SYSTEMS; GENERAL SPECIFICATION FOR |
| MIL-V-19067 Revision A:1957 | VALVE, CHECK, CONTROLLABLE, HYDRAULIC, AIRCRAFT TYPE 11 SYSTEMS |
| SAE AS1339G | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 °F, Lightweight, Hydraulic and Pneumatic |
| SAE AS1290B | Graphic Symbols for Aircraft Hydraulic and Pneumatic Systems |
| SAE ARP584C | Coiled Tubing - Corrosion Resistant Steel, Hydraulic Applications, Aerospace |
| MIL F 5508 : B | FUSE, AIRCRAFT AUTOMATIC QUANTITY MEASURING HYDRAULIC |
| MIL-P-19692 Revision E:1994 | PUMPS, HYDRAULIC, VARIABLE FLOW, GENERAL SPECIFICATION FOR (S/S BY SAE-AS19692) |
| MS33611 Revision A:1983 | TUBE BEND RADII (S/S BY SAE-AS33611) |
| SAE AS4251 | Coupling Assemblies, Non-Locking Probe Style, Self-Aligning, Self-Sealing Disconnects |
| MIL G 8348 : H | GAGE, ASSEMBLIES, AIR PRESSURE, DIAL INDICATING CHUCK TYPE SELF CONTAINED |
| MIL H 5606 : G | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT; MISSILE AND ORDNANCE |
| MS14184 Revision A:1980 | Nonmetallic Shaft-Coupling Details, Engine Driven Accessories |
| MIL C 85052/3 : B | CLAMP, LOOP, TUBE 17-7 PH CRES, 500 DEG., F |
| SAE ARP598D | Aerospace Microscopic Sizing and Counting of Particulate Contamination for Fluid Power Systems |
| MIL-R-8931 Revision A:1994 | Reservoirs,Aircraft and Missile, Hydraulic, Separated Type |
| MIL C 85052 : A | CLAMP LOOP, CUSHION, GENERAL SPECIFICATION FOR |
| MIL-P-83461 Revision B:1980 | PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, IMPROVED PERFORMANCE AT 275 DEG. F (135 DEG. C) (S/S BY SAE-AMS-P-83461) |
| MIL-V-19069 Revision B:1986 | Valve, Check, Hydraulic, Aircraft, Type II Systems |
| FED-STD-791 Revision D:2007 | Testing Method of Lubricants, Liquid Fuels, and Related Products |
| MIL F 18372 : 0 | FLIGHT CONTROL SYSTEMS, DESIGN, INSTALLATION AND TEST OF, AIRCRAFT (GENERAL SPECIFICATION FOR) |
| MIL-C-85449 Base Document:1981 | CLAMP ASSEMBLY, SADDLE TYPE, CUSHION, GENERAL SPECIFICATION FOR |
| SAE AS604E | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 °F, Heavyweight, Hydraulic |
| MIL-STD-1247 Revision D:2009 | Markings, Functions and Hazards Designations of Hose, Pipe, and Tube Lines for Aircraft Missile, and Space Systems |
| MIL-V-29592 Base Document:1993 | VALVE, AIR VENT, AUTOMATIC, HYDRAULIC, LOW PRESSURE TYPE II SYSTEMS, GENERAL SPECIFICATION FOR |
| MIL-B-5087 Revision B:1964 | Bonding, Electrical, and Lightning Protection, for Aerospace Systems (S/S by MIL-STD-464) |
| MIL A 5503 : E | ACTUATOR, AERONAUTICAL LINEAR UTILITY, HYDRAULIC, GENERAL SPECIFICATION FOR |
| MIL-W-5088 Revision L:1991 | Wiring, Aerospace Vehicle (Future Design Should Refer to SAE-AS50881) |
| MIL H 85800 : 0 | HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE, ARAMID FIBER REINFORCED, 5000 & 8000 PSI, GENERAL SPECIFICATION FOR |
| MIL-T-7081 Revision D:1965 | TUBE, ALUMINUM ALLOY, SEAMLESS, ROUND, DRAWN 6061, AIRCRAFT HYDRAULIC QUAL ITY (S/S BY SAE-AMS-T-7081) |
| MIL-F-85421 Revision B:1986 | FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, BEAM SEAM, 3000/4000 PSI - GENERAL SPECIFICATION FOR |
| MS21344 Revision A:2016 | Fittings - Installationof Flared Tube, Straight, Threaded Connectors, Design Standard for |
| MIL-F-7179 Revision G:1993 | Finishes, Coatings, and Sealants for the Protection of Aerospace Weapons Systems (S/S by MIL-STD-7179) |
| MIL-P-83461-1 Revision B:1989 | PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT IMPROVED PERFORMANCE AT 275 DEGREE F (135 DEGREE C) SIZES AND TOLERANCES (S/S BY SAE-AMS-P-83461/1) |
Summarise
£13.91
Excluding VAT
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.