MIL-PRF-131 Revision K:2005
Current
The latest, up-to-date edition.
Barrier Materials, Watervaporproof, Greaseproof, Flexible, Heat-Sealable
English
18-08-2005
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Provides the requirements for heat-sealable, greaseproof, flexible barrier material that has low water vapor transmission characteristics to be used in military packaging.
| DevelopmentNote |
Supersedes MIL B 131 (H). (08/2005)
|
| DocumentType |
Standard
|
| Pages |
17
|
| ProductNote |
NEW CHILD NOT 1 2019 IS NOW ADDED.
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers the requirements for heat-sealable, greaseproof, flexible barrier materials having low water vapor transmission characteristics for use in military packaging.
| MIL-DTL-6060 Revision E:2004 | Bags, Watervaporproof, Heat-Sealable, Complex |
| MIL-DTL-32235-3 Base Document:2010 | Unitized Group Ration-Express (UGR-E) Heater Module: Boil-in-Bag (BIB) Module |
| MIL-DTL-197 Revision M:2016 | Packaging of Bearings, Associated Parts and Subassemblies |
| ASTM F 2511 : 2005 | Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid |
| MIL-DTL-32235-1 Revision A:2010 | Heater Module, Type I: Heater, Assembly Required (Future acquisitionfor thisspecification sheetrefer toMIL-DTL-32235/4) |
| IEC 62435-4:2018 | Electronic components - Long-term storage of electronic semiconductor devices - Part 4: Storage |
| MIL-DTL-81736 Revision C:2015 | Tape, Textile, Nylon, Landbased Arresting Gear, 8-Inch |
| MIL-DTL-32438 Base Document:2013 | Hot Beverage Box |
| MIL-PRF-22019 Revision E:2006 | Barrier Materials, Transparent, Flexible, Sealable, Volatile Corrosion Inhibitor Treated |
| IEC 61760-4:2015 | Surface mounting technology - Part 4: Classification, packaging, labelling and handling of moisture sensitive devices |
| MIL-STD-2073-1 Revision E:2008 | Standard Practice for Military Packaging |
| ASTM F 2511 : 2005 : EDT 1 | Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid |
| MIL-DTL-117 Revision H:2001 | Bags, Heat-Sealable |
| ISO 27996:2009 | Aerospace fluid systems — Elastomer seals — Storage and shelf life |
| MIL-STD-3010 Revision B:2008 | Test Procedures for Packaging Materials and Containers |
| MIL-PRF-61002 Revision B:2008 | Labels, Pressure-Sensitive Adhesive, for Bar Coding |
| 07/30155311 DC : 0 | BS ISO 27996 - AEROSPACE FLUID SYSTEMS - ELASTOMER SEALS - STORAGE AND SHELF LIFE |
| SAE AMS3961 | 350 °F Autoclave Cure, Low Flow Toughened Epoxy Prepregs |
| 12/30261600 DC : DRAFT MAR 2012 | BS EN 61760-4 - CLASSIFICATION, PACKAGING, LABELLING AND HANDLING OF MOISTURE SENSITIVE DEVICES |
| BS ISO 27996:2009 | Aerospace fluid systems. Elastomer seals. Storage and shelf life |
| MIL-PRF-3420 Revision H:2008 | Wrapping Materials, Volatile Corrosion Inhibitor Treated, Opaque |
| BS EN 61760-4 : 2015 | SURFACE MOUNTING TECHNOLOGY - PART 4: CLASSIFICATION, PACKAGING, LABELLING AND HANDLING OF MOISTURE SENSITIVE DEVICES |
| MIL-DTL-32235-2 Base Document:2010 | Heater Module, Type II: Heater, Assembled (Future acquisition for this specification sheet refer to MIL-DTL-32235B/4) |
| I.S. EN 61760-4:2015 | SURFACE MOUNTING TECHNOLOGY - PART 4: CLASSIFICATION, PACKAGING, LABELLING AND HANDLING OF MOISTURE SENSITIVE DEVICES |
| ASTM F 2511 : 2005 : R2013 | Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid |
| ASTM D 5733 : 1999 | Standard Test Method for Tearing Strength of Nonwoven Fabrics by the Trapezoid Procedure (Withdrawn 2008) |
| MIL-STD-3010 Revision B:2008 | Test Procedures for Packaging Materials and Containers |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| ASTM F 1249 : 2013 : REDLINE | Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.