MIL-PRF-22684 Revision F:2006
Current
The latest, up-to-date edition.
Resistor, Fixed, Film (Insulated) General Specification for
13-02-2006
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
APPENDIX A - PROCEDURE FOR QUALIFICATION INSPECTION
APPENDIX B - COLOR CODE FOR RESISTORS
Specifies the general requirements for insulated, film, fixed resistors of 2- and 5- percent resistance tolerance. These resistors are capable of full-load operation at an ambient temperature of 70 degrees C and have a resistance-temperature characteristic of +/-200 parts per million per degree Celsius (ppm/degree C).
| DevelopmentNote |
Supersedes MIL R 22684 (D) (10/2000)
|
| DocumentType |
Standard
|
| Pages |
78
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers the general requirements for insulated, film, fixed resistors of 2- and 5-percent resistance tolerance. These resistors are capable of full-load operation at an ambient temperature of 70OC and have a resistance-temperature characteristic of ±200 parts per million per degree Celsius (ppm/OC), (see 6.1). Designers are CAUTIONED on using these resistors in high power pulse applications (see 6.10).
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| MIL-HDBK-199 Revision D:2018 | Resistors, Selection and Use of |
| MIL-DTL-39032 Revision E:2000 | Resistors, Packaging of |
| MIL-STD-1311 Revision D:2011 | Test Methods for Electron Tubes |
| MIL-R-22684-3 Revision C:2001 | Resistor, Fixed, Film, Insulated, Style RL32 (Future Acquisitions for the item may refer to MIL-PRF-39017/3) |
| MIL R 22684/1 : B | RESISTOR, FIXED, FILM, INSULATED, STYLE RL07 |
| MIL R 22684/2 : C | RESISTOR, FIXED, FILM, INSULATED, STYLE RL20 |
| MIL R 22684/4 : B | RESISTOR, FIXED, FILM, INSULATED, STYLE RL42 |
| MIL-STD-202-211 Base Document:2015 | Method 211, Terminal Strength |
| MIL-STD-202-302 Base Document:2015 | Method 302, Insulation Resistance |
| MIL-STD-202-304 Base Document:2015 | Method 304, Resistance-Temperature Characteristic |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| MIL-STD-202-210 Base Document:2015 | Method 210, Resistance to Soldering Heat |
| MIL-STD-1276 Revision H:2013 | Leads for Electronic Component Parts |
| MIL-STD-202-303 Base Document:2015 | Method 303, DC Resistance |
| MIL R 22684/1 : B | RESISTOR, FIXED, FILM, INSULATED, STYLE RL07 |
| MIL R 22684/4 : B | RESISTOR, FIXED, FILM, INSULATED, STYLE RL42 |
| MIL-STD-202-107 Base Document:2015 | Method 107, Thermal Shock |
| MIL-STD-202-106 Base Document:2015 | Method 106, Moisture Resistance |
| MIL-STD-202-301 Base Document:2015 | Method 301, Dielectric Withstanding Voltage |
| MIL-R-22684-3 Revision C:2001 | Resistor, Fixed, Film, Insulated, Style RL32 (Future Acquisitions for the item may refer to MIL-PRF-39017/3) |
| MIL-STD-202-215 Base Document:2015 | Method 215, Resistance to Solvents |
| MIL R 22684/2 : C | RESISTOR, FIXED, FILM, INSULATED, STYLE RL20 |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| MIL-STD-202-108 Base Document:2015 | Method 108, Life (at Elevated Ambient Temperature) |
| MIL-STD-202-105 Base Document:2015 | Method 105, Barometric Pressure (Reduced) |
| MIL-STD-202-208 Base Document:2015 | Method 208, Solderability |
| MIL-STD-202 Revision H:2015 | Electronic and Electrical Component Parts |
| FED-STD-595 Revision C:2008 | Colors Used in Government Procurement (S/S By SAE-AMS-STD-595) |
| MIL-STD-202-204 Base Document:2015 | Method 204, Vibration, High Frequency |
| MIL-PRF-39017 Revision G:2006 | Resistor, Fixed, Film (Insulated), Nonestablished Reliability, and Established Reliability, General Specification for |
| MIL-STD-202-213 Base Document:2015 | Method 213, Shock (Specified Pulse) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.