MIL-PRF-39001 Revision E:2009
Current
The latest, up-to-date edition.
Capacitor, Fixed, MICA Dielectric, Established Reliability and Nonestablished Reliability, General Specification for
18-02-2009
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
APPENDIX A - PROCEDURE FOR QUALIFICATION INSPECTION
Specifies the general requirements for established reliability (ER) and non-established reliability (non-ER), mica dielectric, fixed capacitors.
| DevelopmentNote |
Supersedes MIL C 39001 (07/2001) Supersedes MIL PRF 87164 (06/2005) E NOTICE 1 - Notice of Validation. (01/2017)
|
| DocumentType |
Standard
|
| Pages |
52
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers the general requirements for established reliability (ER) and non-established reliability (non-ER), mica dielectric, fixed capacitors (see 6.1). The ER capacitors have a failure rate level (FRL) ranging from 1.0 percent per 1,000 hours to 0.001 percent per 1,000 hours (see 1.2.1.7). The FRL is established at a 90 percent confidence level. The FRL, identified by the applicable symbol specified in table V is referred to operational life at full rated voltage (see 1.2.1.6) at +125°C or +150°C, as applicable. An acceleration factor of 25:1 has been used to relate the life test at 150 percent of rated voltage at rated temperature to rated voltage at rated temperature.
| MIL-STD-1580 Revision B:2003 | Destructive Physical Analysis for Electronic, Electromagnetic, and Electromechanical Parts |
| MIL C 5 : G | CAPACITOR, FIXED, MICA DIELECTRIC, GENERAL SPECIFICATION FOR |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| MIL-PRF-39001-5 Revision E:2009 | Capacitor, Fixed, Mica Dielectric, Established Reliability, Styles CMR03, CMR04, CMR05, CMR06, CMR07, and CMR08 |
| NASA MSFC STD 3012 : 2012 | ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL (EEE) PARTS MANAGEMENT AND CONTROL REQUIREMENTS FOR MSFC SPACE FLIGHT HARDWARE |
| MIL-HDBK-198 Revision B:2012 | Capacitors, Selection and Use of |
| MIL-STD-202-211 Base Document:2015 | Method 211, Terminal Strength |
| MIL-STD-202-302 Base Document:2015 | Method 302, Insulation Resistance |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| MIL-STD-202-210 Base Document:2015 | Method 210, Resistance to Soldering Heat |
| MIL-STD-1276 Revision H:2013 | Leads for Electronic Component Parts |
| MIL-STD-202-305 Base Document:2015 | Method 305, Capacitance |
| MIL-PRF-39001-5 Revision E:2009 | Capacitor, Fixed, Mica Dielectric, Established Reliability, Styles CMR03, CMR04, CMR05, CMR06, CMR07, and CMR08 |
| MIL-STD-202-107 Base Document:2015 | Method 107, Thermal Shock |
| MIL-STD-202-106 Base Document:2015 | Method 106, Moisture Resistance |
| MIL-STD-202-301 Base Document:2015 | Method 301, Dielectric Withstanding Voltage |
| MIL-STD-202-215 Base Document:2015 | Method 215, Resistance to Solvents |
| MIL-STD-790 Revision G:2011 | Established Reliability and High Reliability Qualified Products List (QPL) Systems for Electrical, Electronic, and Fiber Optic Parts Specifications |
| MIL C 5 : G | CAPACITOR, FIXED, MICA DIELECTRIC, GENERAL SPECIFICATION FOR |
| MIL-STD-202-104 Base Document:2015 | Method 104, Immersion |
| MIL-STD-202-105 Base Document:2015 | Method 105, Barometric Pressure (Reduced) |
| MIL-STD-202-208 Base Document:2015 | Method 208, Solderability |
| MIL-STD-202 Revision H:2015 | Electronic and Electrical Component Parts |
| MIL-STD-1285 Revision D:2004 | Marking of Electrical and Electronic Parts |
| MIL-STD-202-214 Base Document:2015 | Method 214, Random Vibration |
| MIL-STD-690 Revision D:2005 | Failure Rate (FR) Sampling Plans and Procedures |
| MIL-STD-202-204 Base Document:2015 | Method 204, Vibration, High Frequency |
| MIL-STD-202-213 Base Document:2015 | Method 213, Shock (Specified Pulse) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.