MIL-PRF-39035 Revision E:2008
Current
The latest, up-to-date edition.
Resistor, Variable, Nonwirewound (Adjustment Type), Nonestablished Reliability, and Established Reliability, General Specification for
02-04-2008
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
APPENDIX A - PROCEDURE FOR QUALIFICATION INSPECTION
Specifies the general requirements for nonestablished reliability (non-ER) and established reliability (ER), multiturn lead-screw actuated, and single-turn, nonwirewound, variable resistors with a contact bearing uniformly over the surface of the entire resistive element, when positioned by an actuator.
| DevelopmentNote |
Supersedes MIL R 39035. (07/2004)
|
| DocumentType |
Standard
|
| Pages |
148
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers the general requirements for nonestablished reliability (non-ER) and established reliability (ER), multiturn lead-screw actuated, and single-turn, nonwirewound, variable resistors with a contact bearing uniformly over the surface of the entire resistive element, when positioned by an actuator. These resistors are capable of full-load operation (when the maximum resistance is engaged), at a maximum temperature of 150OC, with a resistance tolerance of ±10 percent. The ER resistors will have life failure rate levels ranging from 1.0 to 0.001 percent per 1,000 hours (see 1.2.1.5). These failure rate levels are established at a 60 percent confidence level maintained at 10 percent producer\'s risk on the basis of the life tests.
| MIL-STD-1580 Revision B:2003 | Destructive Physical Analysis for Electronic, Electromagnetic, and Electromechanical Parts |
| MIL-PRF-39035-2 Revision H:2008 | Resistor, Variable, Nonwirewound (Adjustment Type, Lead-Screw Actuated), Nonestablished Reliability, and Established Reliability Style RJR24 |
| MIL-HDBK-199 Revision D:2018 | Resistors, Selection and Use of |
| DSCC 87126 : J | RESISTOR, VARIABLE, NONWIRE-WOUND (ADJUSTMENT TYPE, LEAD SCREW ACTUATED) |
| MIL-DTL-39032 Revision E:2000 | Resistors, Packaging of |
| MIL-PRF-22097 Revision J:2007 | Resistor, Variable, Nonwirewound, (Adjustment Type), General Specification for |
| NASA MSFC STD 3012 : 2012 | ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL (EEE) PARTS MANAGEMENT AND CONTROL REQUIREMENTS FOR MSFC SPACE FLIGHT HARDWARE |
| MIL-PRF-39035-1 Revision E:2008 | Resistor, Variable, Nonwirewound (Adjustment Type, Lead-Screw Actuated), Nonestablished Reliability, and Established Reliability Style RJR12 |
| MIL-PRF-39035-3 Revision F:2009 | Resistor, Variable, Nonwirewound (Adjustment Type, Lead-Screw Actuated), Nonestablished Reliability and Established Reliability Style RJR26 |
| MIL-PRF-39035-4 Revision G:2008 | Resistor, Variable, Nonwirewound (Adjustment Type, Single Turn), Nonestablished Reliability, and Established Reliability Style RJR50 |
| MIL-STD-202-211 Base Document:2015 | Method 211, Terminal Strength |
| MIL-PRF-39035-2 Revision H:2008 | Resistor, Variable, Nonwirewound (Adjustment Type, Lead-Screw Actuated), Nonestablished Reliability, and Established Reliability Style RJR24 |
| MIL-PRF-39035-1 Revision E:2008 | Resistor, Variable, Nonwirewound (Adjustment Type, Lead-Screw Actuated), Nonestablished Reliability, and Established Reliability Style RJR12 |
| MIL-STD-202-302 Base Document:2015 | Method 302, Insulation Resistance |
| MIL-STD-202-304 Base Document:2015 | Method 304, Resistance-Temperature Characteristic |
| MIL-STD-202-210 Base Document:2015 | Method 210, Resistance to Soldering Heat |
| MIL-STD-1276 Revision H:2013 | Leads for Electronic Component Parts |
| MIL-STD-202-303 Base Document:2015 | Method 303, DC Resistance |
| MIL-PRF-39035-4 Revision G:2008 | Resistor, Variable, Nonwirewound (Adjustment Type, Single Turn), Nonestablished Reliability, and Established Reliability Style RJR50 |
| MIL-STD-202-101 Base Document:2015 | Method 101, Salt Atmosphere (Corrosion) |
| MIL-STD-202-107 Base Document:2015 | Method 107, Thermal Shock |
| MIL-STD-202-106 Base Document:2015 | Method 106, Moisture Resistance |
| MIL-STD-202-301 Base Document:2015 | Method 301, Dielectric Withstanding Voltage |
| MIL-STD-790 Revision G:2011 | Established Reliability and High Reliability Qualified Products List (QPL) Systems for Electrical, Electronic, and Fiber Optic Parts Specifications |
| MIL-STD-202-108 Base Document:2015 | Method 108, Life (at Elevated Ambient Temperature) |
| MIL-STD-202-105 Base Document:2015 | Method 105, Barometric Pressure (Reduced) |
| MIL-STD-202-208 Base Document:2015 | Method 208, Solderability |
| MIL-STD-202 Revision H:2015 | Electronic and Electrical Component Parts |
| MIL-STD-1285 Revision D:2004 | Marking of Electrical and Electronic Parts |
| EIA 557 : 2006 | STATISTICAL PROCESS CONTROL SYSTEMS |
| MIL-STD-690 Revision D:2005 | Failure Rate (FR) Sampling Plans and Procedures |
| MIL-STD-202-204 Base Document:2015 | Method 204, Vibration, High Frequency |
| MIL-PRF-39035-3 Revision F:2009 | Resistor, Variable, Nonwirewound (Adjustment Type, Lead-Screw Actuated), Nonestablished Reliability and Established Reliability Style RJR26 |
| MIL-STD-202-213 Base Document:2015 | Method 213, Shock (Specified Pulse) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.