MIL-PRF-87252 Revision D:2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Coolant Fluid, Hydrolytically Stable, Dielectric
English
23-11-2015
14-05-2021
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies the characteristics and provides the requirements for a -54 to 200 Degrees C synthetic hydrocarbon fluid for use in electronic applications.
| DocumentType |
Standard
|
| Pages |
11
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This specification describes the characteristics and provides the requirements for a -54 °C to 200 °C synthetic hydrocarbon dielectric coolant fluid for use in electronic applications. This fluid is identified by NATO Code S-1748 (see 6.8).
.
| MIL-STD-290 Revision H:2013 | Packaging and Marking of Petroleum and Related Products |
| MIL-PRF-8805-48 Revision H:2004 | Switches, Sensitive, Limit, Roller Lever, Self-Return, Resilient Seal, Fluid Resistant |
| MIL-DTL-32529 Base Document:2015 | Power Electronic Conversion Equipment, Naval Shipboard |
| SAE AS85485B | Cable, Electric, Filter Line, Radio Frequency Absorptive |
| MIL-DTL-83731 Revision E:2016 | Switches, Toggle, Unsealed and Sealed Toggle General Specification for |
| MIL-DTL-32139 Revision B:2017 | Connectors, Electrical, Rectangular, Nanominiature, Polarized Shell, General Specification for |
| MIL-DTL-3950 Revision K:2016 | Switches, Toggle, Environmentally Sealed, General Specification for |
| MIL-PRF-8805-49 Revision J:2012 | Switches, Sensitive, Limit, Rotary Linkage Lever (Nonself-Return), Resilient Seal, Fluid Resistant |
| MIL-DTL-7703 Revision F:2010 | Guard, Switch, General Specification for |
| MIL-DTL-83528 Revision H:2018 | Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, EMI/RFI, General Specification for |
| MIL-DTL-83526 Revision D:2014 | Connectors, Fiber Optic, Circular, Environmental Resistant, Hermaphroditic, General Specification for |
| PREN 4641-102 : 200P1 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 102: SEMI-LOOSE 62,5/125 [MU]M GI FIBRE NOMINAL 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| MIL-PRF-8805-39 Revision J:2014 | Switches, Sensitive, Limit, Plunger, 7 Amperes, Resilient Seal, Fluid Resistant |
| I.S. EN 4641-102:2009 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M OUTSIDE DIAMETER CLADDING - PART 102: SEMI-LOOSE 62,5/125 [MU]M GI FIBRE NOMINAL 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| SAE AS22759C | Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy |
| MIL-STD-3004 Revision D:2014 | Quality Assurance/Surveillance for Fuels, Lubricants and Related Products (S/S by MIL-STD-3004-1 and MIL-STD-3004-2) |
| MIL-S-8805-85 Revision E:2005 | Switch, Sensitive, Rotary (Non-Self Return), 4 Amperes, Resilient Seal (No S/S Document) |
| MS21346 Revision F:2005 | Switch, Toggle, Positive Break, Lever Lock and Toggle, Miniature, Toggle Sealed, Integrated Wire Terminals, Single Pole, .469 Mounting Bushing |
| MS21347 Revision K:2005 | Switch, Toggle, Positive Break, Miniature, Toggle Sealed, and --Lever Lock-- Miniature, Toggle Sealed, Integrated Wire Terminals, Double Pole, .469 Mounting Bushing |
| BS EN 4641-102:2009 | Aerospace series. Cables, optical 125 μm outside diameter cladding Semi-loose 62,5/125 μm GI fibre nominal 1,8 mm outside diameter. Product standard |
| MIL-PRF-8805-80 Revision G:2009 | Switch, Sensitive, Limit, Hermetic Seal |
| NF EN 4641-102 : 2009 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M OUTSIDE DIAMETER CLADDING - PART 102: SEMI-LOOSE 62,5/125 [MU]M GI FIBRE NOMINAL 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| PREN 4641-100 : 200P1 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 100: TIGHT STRUCTURE 62,5/125 [MU]M CORE GI FIBRE 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| EN 4641-102:2009 | Aerospace series - Cables, optical 125 μm outside diameter cladding - Part 102: Semi-loose 62,5/125 µm GI fibre nominal 1,8 mm outside diameter - Product standard |
| MIL-STD-1568 Revision D:2015 | Materials and Processes for Corrosion Prevention and Control in Aerospace Weapons Systems |
| SAE AMS3400 | Fluid, Reference for Testing Polyalphaolefin (PAO) Resistant Material |
| ASTM D 4636 : 2017 : REDLINE | Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils |
| ISO 11500:2008 | Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
| ASTM D 4289 : 2014-02 | TEST METHOD FOR ELASTOMER COMPATIBILITY OF LUBRICATING GREASES AND FLUIDS |
| SAE AMS3217/2C | Test Slabs, Acrylonitrile Butadiene (NBR-L) Low Acrylonitrile, 65 - 75 |
| ISO 11171:2016 | Hydraulic fluid power — Calibration of automatic particle counters for liquids |
| FED-STD-791 Revision D:2007 | Testing Method of Lubricants, Liquid Fuels, and Related Products |
| SD 6 : 20140201 | PROVISIONS GOVERNING QUALIFICATION: QUALIFIED PRODUCTS LIST AND QUALIFIED MANUFACTURERS LISTS |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.