NAVSEA T9074 BD GIB 010/0300 : 0

LOW-ALLOY CARBON STEEL, PLATE, SHAPES, BARS, CASTINGS
AND FORGINGS, HIGH STRENGTH (HY & HSLA, -80, -100, AND
-130)
1. SCOPE
   1.1 Scope
   1.2 Classification
2. APPLICABLE DOCUMENTS
   2.1 General
   2.2 Government documents
   2.3 Non-Government publications
   2.4 Order of precedence
3. REQUIREMENTS
   3.1 First article
   3.2 Material
   3.3 Chemical composition
   3.4 Mechanical properties
   3.5 Heat treatment
   3.6 Surface quality
   3.7 Dimension and tolerances
   3.8 Identification markings
   3.9 Descaling and cleaning
   3.10 Internal soundness
   3.11 Explosion testing
4. VERIFICATION
   4.1 Responsibility for inspection
   4.2 Classification of inspections
   4.3 First article inspection
   4.4 Quality conformance inspection
   4.5 Test procedures
   4.6 Rejection and retests
5. PACKAGING
   5.1 Preparation for packaging and packing
   5.2 Packaging, packing, and marking for shipment
   5.3 Packaging by DoD personnel
6. NOTES
   6.1 Intended use
   6.2 Acquisition requirements
   6.3 First article
APPENDIX A STEEL PLATE, SHEET, OR COIL, AGE-HARDENING ALLOY,
           STRUCTURAL, HIGH YIELD STRENGTH (HSLA-80 AND HSLA-100)
           A.1 SCOPE
           A.2 APPLICABLE DOCUMENTS
           A.3 REQUIREMENTS
           A.4 VERIFICATION
           A.5 PACKAGING
           A.6 NOTES
APPENDIX B STEEL PLATE, ALLOY, STRUCTURAL, HIGH YIELD
           STRENGTH (HY-80 and HY-100)
           B.1 SCOPE
           B.2 APPLICABLE DOCUMENTS
           B.3 REQUIREMENTS
           B.4 VERIFICATION
           B.5 PACKAGING
           B.6 NOTES
APPENDIX C STEEL FORGINGS, ALLOY, STRUCTURAL, HIGH YIELD
           STRENGTH (HY-130)
           C.1 SCOPE
           C.2 APPLICABLE DOCUMENTS
           C.3 REQUIREMENTS
           C.4 VERIFICATION
           C.5 PACKAGING
           C.6 NOTES
APPENDIX D STEEL CASTINGS, ALLOY, HIGH YIELD STRENGTH
           (HY-80 AND HY-100)
           D.1 SCOPE
           D.2 APPLICABLE DOCUMENTS
           D.3 REQUIREMENTS
           D.4 VERIFICATION
           D.5 PACKAGING
           D.6 NOTES
APPENDIX E STEEL FORGINGS, ALLOY, HIGH YIELD STRENGTH
           (HY-80 AND HY-100)
           E.1 SCOPE
           E.2 APPLICABLE DOCUMENTS
           E.3 REQUIREMENTS
           E.4 VERIFICATION
           E.5 PACKAGING
           E.6 NOTES
APPENDIX F STEEL PLATE, STRUCTURAL, HIGH YIELD STRENGTH (HY-130)
           F.1 SCOPE
           F.2 APPLICABLE DOCUMENTS
           F.3 REQUIREMENTS
           F.4 VERIFICATION
           F.5 PACKAGING
           F.6 NOTES
APPENDIX G STEEL (HY-80 AND HY-100) BARS, ALLOY
           G.1 SCOPE
           G.2 APPLICABLE DOCUMENTS
           G.3 REQUIREMENTS
           G.4 VERIFICATION
           G.5 PACKAGING
           G.6 NOTES
APPENDIX H STEEL, STRUCTURAL SHAPES ALLOY, HIGH YIELD
           STRENGTH (HY-80 AND HY-100)
           H.1 SCOPE
           H.2 APPLICABLE DOCUMENTS
           H.3 REQUIREMENTS
           H.4 VERIFICATION
           H.5 PACKAGING
           H.6 NOTES
APPENDIX I STEEL HEAT TREATED HEADS, ALLOY STRUCTURAL, HIGH
           YIELD STRENGTH (HY-80 AND HY-100)
           I.1 SCOPE
           I.2 APPLICABLE DOCUMENTS
           I.3 REQUIREMENTS
           I.4 VERIFICATION
           I.5 PACKAGING
           I.6 NOTES
APPENDIX J ULTRASONIC PROCEDURES AND EVALUATION
           J.1 SCOPE
           J.2 APPLICABLE DOCUMENTS
           J.3 REQUIREMENTS
           J.4 TECHNIQUES
           J.5 PACKAGING
           J.6 NOTES
APPENDIX K COATINGS
           K.1 SCOPE
           K.2 APPLICABLE DOCUMENTS
           K.3 REQUIREMENTS
           K.4 PROCEDURES
           K.5 PACKAGING
           K.6 NOTES
APPENDIX L STANDARD PROCEDURES FOR EXPLOSION TESTING FERROUS
           AND NON-FERROUS METALLIC MATERIALS AND WELDMENTS
           L.1 SCOPE
           L.2 APPLICABLE DOCUMENTS
           L.3 DEFINITIONS
           L.4 GENERAL REQUIREMENTS
           L.5 DETAILED REQUIREMENTS
           L.6 QUALIFICATION CONDITION OF MATERIAL
           L.7 PREPARATION AND WELDING OF EXPLOSION TEST WELDMENTS
               WITH AND WITHOUT MECHANICAL PROLONGATION
           L.8 PREPARATION OF TEST ASSEMBLIES FOR EXPLOSION TESTING
           L.9 MECHANICAL AND EXPLOSION TESTING
           L.10 NOTES
           L.11 TEST REPORT TECHNICAL CONTENT REQUIREMENTS
APPENDIX M SUPPLEMENTAL TECHNICAL REQUIREMENTS TO ISO 9001:2000
           M.1 SCOPE
           M.2 APPLICABLE DOCUMENTS
           M.3 REQUIREMENTS

Covers the general requirements, quality assurance provisions, test procedures, and instructions for preparation for delivery for high-strength steel plate, shapes, bars, castings, forgings and other products.