NBR IEC 60079-15 : 2012
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION "N"
Published date
12-01-2013
Publisher
Superseded date
20-12-2019
Superseded by
Sorry this product is not available in your region.
| Committee |
CB-03
|
| DocumentType |
Standard
|
| PublisherName |
Brazilian Standards
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| IEC 60079-15:2010 | Identical |
| NBR IEC 60050-426 : 2011 | INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 426: EQUIPMENT FOR EXPLOSIVE ATMOSPHERES |
| NBR IEC 60079-19 : 2016 | EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION |
| NBR IEC 60079-28 : 2016 | EXPLOSIVE ATMOSPHERES - PART 28: PROTECTION OF EQUIPMENT AND TRANSMISSION SYSTEMS USING OPTICAL RADIATION |
| NBR IEC 60079-1 : 2016 | EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' |
| NBR IEC 60079-18 : 2016 | EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M' |
| NBR IEC 60079-0 : 2013 ERRATA 2 2016 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| NBR IEC 60079-17 : 2014 ERRATA 1 2017 | EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE |
| IEC 60598-2-10:2003 | Luminaires - Part 2-10: Particular requirements - Portable luminaires for children |
| IEC 60061-2L:1994 | Eleventh supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders |
| IEC 61347-2-3:2011+AMD1:2016 CSV | Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps |
| IEC 60598-2-11:2013 | Luminaires - Part 2-11: Particular requirements - Aquarium luminaires |
| IEC 60598-2-18:1993 | Luminaires - Part 2: Particular requirements - Section 18: Luminaires for swimming pools and similar applications |
| IEC 60061-3Q:1995 | Fifteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges |
| IEC 60061-3:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges |
| IEC 60061-3J:1983 | Ninth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges |
| IEC 60061-2G:1983 | Seventh supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders |
| IEC 60228:2004 | Conductors of insulated cables |
| IEC 60061-1H:1977 | Eighth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps |
| IEC 60598-2-23:1996+AMD1:2000 CSV | Luminaires - Part 2-23: Particular requirements - Extra low voltage lighting systems for filament lamps |
| IEC 60034-9:2003+AMD1:2007 CSV | Rotating electrical machines - Part 9: Noise limits |
| IEC 60061-2E:1977 | Fifth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| IEC 61048:2006+AMD1:2015 CSV | Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements |
| IEC 60598-2-17:2017 | Luminaires - Part 2-17: Particular requirements - Luminaires for stage lighting, television and film studios (outdoor and indoor) |
| IEC 60061-3M:1992 | Twelfth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges |
| IEC 60034-22:2009 | Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets |
| IEC 60998-2-4:2004 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-4: Particular requirements for twist-on connecting devices |
| IEC 60061-2F:1980 | Sixth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders |
| IEC 60034-29:2008 | Rotating electrical machines - Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise |
| IEC 60061-2M:1994 | Twelfth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders |
| NBR IEC 60079-1 : 2016 | EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' |
| IEC 61347-2-9:2012 | Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) |
| IEC 60061-1K:1983 | Tenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps |
| IEC 60061-1Q:1994 | Fifteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps |
| IEC 60061-3G:1977 | Seventh supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges |
| IEC 60999-2:2003 | Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included) |
| IEC 60034-2A:1974 | Rotating electrical machines - Part 2: Methods for determining losses and efficiency of rotating electrical machinery form tests (excluding machines for traction vehicles) - Measurement of losses by the calorimetric method |
| IEC 60598-2-20:2014 | Luminaires - Part 2-20: Particular requirements - Lighting chains |
| IEC 60061-1P:1994 | Fourteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps |
| IEC 60061-3H:1980 | Eighth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges |
| IEC 61347-1:2015 RLV | Lamp controlgear - Part 1: General and safety requirements |
| IEC 60598-2-19:1981 | Luminaires. Part 2: Particular requirements. Section Nineteen: Air-handling luminaires (safety requirements) |
| IEC 60061-2:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders |
| IEC 60061-2H:1987 | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders - Eight supplement. |
| IEC 60598-2-5:2015 | Luminaires - Part 2-5: Particular requirements - Floodlights |
| IEC 60400:2017 | Lampholders for tubular fluorescent lamps and starterholders |
| IEC 60598-2-6:1994 | Luminaires - Part 2: Particular requirements - Section 6: Luminaires with built-in transformers for filament lamps |
| IEC 60598-2-8:2013 | Luminaires - Part 2-8: Particular requirements - Handlamps |
| IEC 60034-3:2007 | Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines |
| IEC 60034-19:2014 | Rotating electrical machines - Part 19: Specific test methods for d.c. machines on conventional and rectifier-fed supplies |
| IEC 61347-2-1:2000+AMD1:2005+AMD2:2013 CSV | Lamp controlgear - Part 2-1: Particular requirements for startingdevices (other than glow starters) |
| IEC 61347-2-4:2000 | Lamp controlgear - Part 2-4: Particular requirements for d.c. supplied electronic ballasts for general lighting |
| IEC 60061-3N:1994 | Thirteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges |
| IEC 60999-1:1999 | Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included) |
| IEC 60061-1L:1987 | Eleventh supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps |
| IEC 60061-2K:1992 | Tenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders |
| IEC 60061-2N:1995 | Thirteenth suplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders |
| IEC 60061-1J:1980 | Ninth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps |
| IEC 60061-3K:1987 | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges - Tenth supplement. |
| IEC 60034-18-22:2000 | Rotating electrical machines - Part 18-22: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Classification of changes and insulation component substitutions |
| IEC 60598-2-3:2002+AMD1:2011 CSV | Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting |
| IEC 60034-2-1:2014 | Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) |
| IEC 60034-18-1:2010 | Rotating electrical machines - Part 18-1: Functional evaluation of insulation systems - General guidelines |
| IEC 60034-8:2007+AMD1:2014 CSV | Rotating electrical machines - Part 8: Terminal markings anddirection of rotation |
| IEC 60061-1G:1977 | Seventh supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps |
| IEC TS 60034-25:2014 | Rotating electrical machines - Part 25: AC electrical machines used in power drive systems - Application guide |
| NBR IEC 60079-0 : 2013 ERRATA 2 2016 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| IEC 61347-2-7:2011+AMD1:2017 CSV | Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) |
| IEC 60598-2-25:1994 | Luminaires - Part 2: Particular requirements - Section 25: Luminaires for use in clinical areas of hospitals and health care buildings |
| IEC 60269-3:2010+AMD1:2013 CSV | Low-voltage fuses - Part 3: Supplementary requirements for fuses foruse by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F |
| IEC 60598-2-13:2006+AMD1:2011+AMD2:2016 CSV | Luminaires - Part 2-13: Particular requirements - Ground recessedluminaires |
| IEC 60061-1R:1995 | Sixteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps |
| IEC 60034-14:2003+AMD1:2007 CSV | Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity |
| IEC 60034-4:2008 | Rotating electrical machines - Part 4: Methods for determining synchronous machine quantities from tests |
| IEC 60061-3P:1994 | Fourteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges |
| IEC 60034-18-34:2012 | Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems |
| IEC 60061-4:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information |
| IEC 60034-26:2006 | Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors |
| IEC 60598-1:2014+AMD1:2017 CSV | Luminaires - Part 1: General requirements and tests |
| IEC 60034-18-21:2012 | Rotating electrical machines - Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification |
| IEC 60061-1:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps |
| IEC 60598-2-12:2013 | Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights |
| IEC 60061-3L:1989 | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges - Eleventh supplement. |
| IEC 60034-1:2017 | Rotating electrical machines - Part 1: Rating and performance |
| IEC 61347-2-2:2011 | Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps |
| IEC 60927:2007+AMD1:2013 CSV | Auxiliaries for lamps - Starting devices (other than glow starters)- Performance requirements |
| IEC 60598-2-22:2014+AMD1:2017 CSV | Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting |
| IEC 60034-2-2:2010 | Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1 |
| IEC 60034-12:2016 | Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors |
| IEC 60034-18-31:2012 | Rotating electrical machines - Part 18-31: Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in rotating machines |
| IEC 60061-2J:1989 | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders - Ninth supplement. |
| IEC 60061-1N:1992 | Thirteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps |
| IEC 60598-2-24:2013 | Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures |
| IEC 60034-28:2012 | Rotating electrical machines - Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors |
| IEC 60061-1V:1997 | Twentieth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps |
| IEC 60598-2-2:2011 | Luminaires - Part 2-2: Particular requirements - Recessed luminaires |
| IEC 60034-30:2008 | Rotating electrical machines - Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code) |
| IEC 60155:1993 | Glow-starters for fluorescent lamps |
| IEC 60598-2-14:2009 | Luminaires - Part 2-14: Particular requirements - Luminaires for cold cathode tubular discharge lamps (neon tubes) and similar equipment |
| IEC 60061-1M:1989 | Twelfth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| IEC 61347-2-8:2000+AMD1:2006 CSV | Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps |
| IEC 60598-2-7:1982 | Luminaires. Part 2: Particular requirements. Section Seven: Portable luminaires for garden use |
| IEC 60598-2-4:2017 | Luminaires - Part 2-4: Particular requirements - Portable general purpose luminaires |
| IEC 61184:2017 | Bayonet lampholders |
Summarise
Sorry this product is not available in your region.