PREN 14140 : DRAFT 2012
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
Published date
12-01-2013
Publisher
Superseded date
01-12-2014
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Materials
5 Design
6 Construction and workmanship
7 Tests and examinations
8 Technical requirements for type approval
9 Production testing and examination requirements
10 Marking
11 Certificate
Annex A (normative) - Additional manufacturers markings
Annex B (normative) - Protected cylinder
Annex C (informative) - Environmental checklist
Bibliography
Defines the minimum requirements for the design, construction and testing during manufacture of transportable refillable welded steel Liquefied Petroleum Gas (LPG) cylinders, of water capacity from 0,5 l up to and including 150 l, exposed to ambient temperatures.
| Committee |
TC 286
|
| DocumentType |
Draft
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| Standards | Relationship |
| 12/30248681 DC : 0 | Identical |
| 14/30297536 DC : 0 | BS EN 16728 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE LPG CYLINDERS OTHER THAN WELDED AND BRAZED STEEL CYLINDERS - PERIODIC INSPECTION |
| ISO 11997-2:2013 | Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light |
| EN ISO 6520-1:2007 | Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007) |
| EN ISO 14021:2016 | Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:2016) |
| EN 10120:2017 | Steel sheet and strip for welded gas cylinders |
| ISO 2812-2:2007 | Paints and varnishes — Determination of resistance to liquids — Part 2: Water immersion method |
| EN 462-2:1994 | Non-destructive testing - Image quality of radiographs - Part 2: Image quality indicators (step/hole type) - Determination of image quality value |
| ISO 6520-1:2007 | Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 1: Fusion welding |
| ISO 14245:2006 | Gas cylinders — Specifications and testing of LPG cylinder valves — Self-closing |
| EN ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004) |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| EN 1321:1996 | Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds |
| EN ISO 3231:1997 | Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide (ISO 3231:1993) |
| EN ISO 643:2012 | Steels - Micrographic determination of the apparent grain size (ISO 643:2012) |
| ISO 14024:1999 | Environmental labels and declarations — Type I environmental labelling — Principles and procedures |
| ISO 14021:2016 | Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling) |
| ISO 6892-1:2016 | Metallic materials — Tensile testing — Part 1: Method of test at room temperature |
| EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
| EN ISO 11997-2:2013 | Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013) |
| ISO 11363-1:2010 | Gas cylinders — 17E and 25E taper threads for connection of valves to gas cylinders — Part 1: Specifications |
| EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
| ISO 5173:2009 | Destructive tests on welds in metallic materials — Bend tests |
| EN 1439:2017 | LPG equipment and accessories - Procedure for checking transportable refillable LPG cylinders before, during and after filling |
| EN 10028-7:2016 | Flat products made of steels for pressure purposes - Part 7: Stainless steels |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 1: Arc welding |
| EN ISO 17637:2016 | Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2016) |
| ISO 4624:2016 | Paints and varnishes — Pull-off test for adhesion |
| EN ISO 14025:2010 | Environmental labels and declarations - Type III environmental declarations - Principles and procedures (ISO 14025:2006) |
| ISO 15995:2006 | Gas cylinders — Specifications and testing of LPG cylinder valves — Manually operated |
| EN 1442:2017 | LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN ISO 4624:2016 | Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016) |
| ISO 17637:2016 | Non-destructive testing of welds — Visual testing of fusion-welded joints |
| EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
| ISO 643:2012 | Steels — Micrographic determination of the apparent grain size |
| EN 462-1:1994 | Non-destructive testing - Image quality of radiographs - Part 1: Image quality indicators (wire type) - Determination of image quality value |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| ISO 14025:2006 | Environmental labels and declarations — Type III environmental declarations — Principles and procedures |
| EN ISO 4136:2012 | Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012) |
| EN 14894:2013 | LPG equipment and accessories - Cylinder and drum marking |
| ISO 4136:2012 | Destructive tests on welds in metallic materials — Transverse tensile test |
| ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials — Qualification based on pre-production welding test |
| ISO 2409:2013 | Paints and varnishes — Cross-cut test |
| EN 14717:2005 | Welding and allied processes - Environmental check list |
| EN 1418:1997 | Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials |
| EN ISO 15995:2010 | Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated (ISO 15995:2006) |
| ISO 11117:2008 | Gas cylinders — Valve protection caps and valve guards — Design, construction and tests |
| 1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
| ISO 3231:1993 | Paints and varnishes — Determination of resistance to humid atmospheres containing sulfur dioxide |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
| EN ISO 14245:2010 | Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing (ISO 14245:2006) |
Summarise
Sorry this product is not available in your region.