• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

SAE AMS 2417 : 2013

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

PLATING, ZINC-NICKEL ALLOY

Available format(s)

Hardcopy , PDF

Superseded date

29-05-2020

Language(s)

English

Published date

01-01-2013

1 SCOPE
2 APPLICABLE DOCUMENTS
3 TECHNICAL REQUIREMENTS
4 QUALITY ASSURANCE PROVISIONS
5 PREPARATION FOR DELIVERY
6 ACKNOWLEDGMENT
7 REJECTIONS
8 NOTES

Specifies the requirements for electrodeposition of a zinc-nickel alloy and the properties of the deposit.

Committee
AMS B
DocumentType
Standard
Pages
9
PublisherName
SAE International
Status
Superseded
SupersededBy
Supersedes

ISO 13412:1997 Aerospace — Airframe needle track roller, yoke type, single-row, sealed — Inch series
MIL-DTL-32460-3 Base Document:2013 FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE
MIL-DTL-32480-1 Base Document:2014 Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless Male to ORFS Male
MIL-DTL-32372-4 Revision A:2017 Fitting, Adapter, Straight, Hydraulic and Pneumatic, NPTF Male to ORFS Bulkhead
MS51819 Revision E:1987 ADAPTER, STRAIGHT, PIPE TO TUBE MALE PIPE END, FLARELESS TYPE, HYDRAULIC
MS51525 Revision B:1988 FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; ADAPTER, STRAIGHT, TUBE TO BOSS, O-RING, 37 DEGREE FLARED
MS39210 Revision K:2018 NUTS, TUBE COUPLING - SAFETY SLEEVE COMPRESSION TYPE
MS51510 Revision D:2017 TEE, TUBE, 37 DEGREE FLARED
MIL-DTL-52471-10 Revision B:2008 HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100R12 FOUR-SPIRAL-WRAP REINFORCEMENT HOSE
MIL-DTL-32480-5 Base Document:2014 Fitting, Adapter, 45 Degrees Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Bulkhead
MIL-DTL-52525-35 Revision B:2008 FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 45 DEGREES BENT TUBE
MS51814 Revision E:1987 NIPPLE, TUBE, BULKHEAD, REGULAR HEX, FLARELESS TYPE, HYDRAULIC
MIL-DTL-32371-10 Base Document:2012 Fittings, Hydraulic Tube, Sleeve, Double Angle
MIL-DTL-32371-4 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Tee, Spherical on Branch
MIL-DTL-52525-10 Revision D:2011 FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, STRAIGHT
16/30354034 DC : 0 BS EN 4854-1 - AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS, NARROW SERIES - DIMENSIONS AND LOADS
MIL-DTL-32372-12 Revision A:2017 Fitting, Adapter, Tee, Hydraulic and Pneumatic, NPTF Male on Branch to ORFS Male Run to Run
ISO 13414:1997 Aerospace — Airframe needle roller bearings, single-row, shielded — Inch series
MIL-DTL-83796-10 Revision A:2014 HOSE ASSEMBLY, RUBBER, LIGHT WEIGHT, INTERNAL SUPPORT COIL, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE
MIL-DTL-32464-6 Base Document:2013 MALE ADAPTER, UNION CROSS, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 37 DEGREES SPHERICAL ON BRANCH, 1500-3000 PSI
MIL-DTL-32480 Base Document:2014 Adapter, Hydraulic and Pneumatic, Flareless Tube Fitting to ORFS Connectors, 1500 to 3000 PSI and Minus 65 Degrees Fahrenheit to Plus 250 Degrees Fahrenheit, General Specification for
ISO 13417:1997 Aerospace — Airframe needle track roller, stud type, single-row, sealed — Metric series
MIL-DTL-32464-12 Base Document:2013 MALE ADAPTER, TEE, 37 DEGREES SPHERICAL TO ANPT, ANPT ON BRANCH, 1500-3000 PSI
MIL-DTL-32464-1 Base Document:2013 MALE ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI
ISO 14212:1998 Aerospace — Airframe ball bearings, single-row, rigid, sealed, torque tube design, extra-light duty — Inch series
MIL-DTL-83796-11 Revision A:2014 HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, INTERNAL SUPPORT COIL, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE, WITH LOCKWIRE HOLE
MS35758 Revision D:2012 CUPS, GREASE, MANUAL FEED
SAE AS 8952 : 2005 BEARINGS, ROLLER, ROD END, ANTIFRICTION SELF-ALIGNING
MS39199 Revision G:2012 NIPPLE, TUBE-SAFETY SLEEVE COMPRESSION TYPE, BULKHEAD MOUNTING
ABMA ISO 14211 : 1997 AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, PRECISION, SEALED, TORQUE TUBE DESIGN, LIGHT DUTY - INCH SERIES
MS51825 Revision H:2008 SLEEVES, CLINCHES, TUBE FITTING, FLARELESS TYPE, HYDRAULIC
MIL-DTL-52525-32 Revision A:2008 FITTINGS, HOSE, REINFORCED HYDRAULIC HOSE AND CLAMP-HALVES: FIELD ATTACHABLE (REUSABLE), SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE, FOR USE WITH TYPE 100RE FOUR-SPIRAL-WRAP REINFORCEMENT HOSE
MS51534 Revision A:1979 REDUCER, TUBE, 37 DEGREE FLARED
MIL-B-6039 Revision E:1994 BEARING, DOUBLE ROW, BALL, SEALED ROD END, ANTI FRICTION, SELF ALIGNING
MIL-DTL-52525-44 Base Document:2008 FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 45 DEGREES BENT TUBE
MS51811 Revision E:1987 TEE, TUBE, FLARELESS TYPE HYDRAULIC
MIL-DTL-32480-6 Base Document:2014 Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS Bulkhead
MIL-DTL-32372-8 Revision A:2017 Fitting, Adapter, 45 Degree, Hydraulic and Pneumatic, NPTF Male to ORFS Female Swivel
ABMA ISO 14210 : 1998 AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, SEALED, TORQUE TUBE DESIGN, LIGHT DUTY - INCH SERIES
MIL-DTL-32372-9 Revision A:2017 Fitting, Adapter, 90 Degree, Hydraulic and Pneumatic, NPTF Male to ORFS Female Swivel
ISO 13416:1997 Aerospace — Airframe needle track roller, yoke type, single-row, sealed — Metric series
MIL-DTL-52525-1 Revision D:2011 FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT, SAE-J516 TYPE, FOR ASSEMBLY WITH SAE-J517, TYPE 100R2 HOSE
MS51528 Revision B:1988 FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; ELBOW, TUBE TO BOSS, 45 DEGREE, O-RING, 37 DEGREE FLARED
MS51816 Revision E:1987 ADAPTER, STRAIGHT, PIPE TO TUBE, FEMALE PIPE END, FLARELESS TYPE, HYDRAULIC
MIL-DTL-32371-3 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 90 Degrees Elbow
MIL-DTL-32372-7 Revision A:2017 Fitting, Adapter, Straight, Hydraulic and Pneumatic, NPTF Male to ORFS Female Swivel
MS51501 Revision C:2016 NIPPLE TUBE, REGULAR HEX, 37 DEGREE FLARED, SHORT
MIL-DTL-52525-43 Base Document:2008 FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, STRAIGHT
MS51521 Revision C:2017 ELBOW, TUBE, 90 DEGREE, SWIVEL, 37 DEGREE FLARED
MIL-DTL-52525-11 Revision C:2008 FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 45 DEGREES BENT TUBE
MIL-DTL-32372-6 Revision A:2017 Fitting, Adapter, 90 Degree Male, Hydraulic and Pneumatic, NPTF to ORFS Bulkhead
MIL-DTL-32371-6 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Nipple Tube, Regular Hex, Long
MIL-DTL-32372 Revision A:2016 Fitting, Adapter, Hydraulic and Pneumatic, NPTF to ORFS Connectors, 1500 to 3000 PSI and -65°F to 250°F
SAE AIR 5479 : 2017 ENVIRONMENTALLY COMPLIANT PROCESSES FOR LANDING GEAR
MS51509 Revision D:2017 ELBOW, TUBE, 45 DEGREE, BULKHEAD, 37 DEGREE FLARED
MS39212 Revision K:2018 SLEEVES, COMPRESSION, TUBE - HOSE FITTING - SAFETY SLEEVE TYPE
MS51524 Revision C:2017 TEE, TUBE TO SWIVEL, SWIVEL ON BRANCH, 37 DEGREE FLARED
MIL-DTL-62011-2 Base Document:2009 Pump, Fuel, Electrically-Operated: 24-Volt DC, In-Tank Type, Side-Mounted Connector, Type II
MS51504 Revision C:2016 ELBOW, PIPE TO TUBE, 90 DEGREE MALE PIPE END, 37 DEGREE FLARED
AN 6270 : 0010 HOSE ASSEMBLY - DETACHABLE SWIVEL FITTING, LOW PRESSURE
MIL-DTL-52525-38 Revision B:2008 FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE
MS51532 Revision B:1988 FITTING, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; CAP, TUBE, 37 DEGREE FLARED
MIL-DTL-32372-2 Revision A:2017 Fitting, Adapter, 45 DegreesElbow, Hydraulic and Pneumatic, NPTF Male to ORFS Male
MIL-DTL-32480-7 Base Document:2014 Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel
MS51520 Revision C:2017 NIPPLE, TUBE, BULKHEAD, 37 DEGREE FLARED
MIL-DTL-83796-4 Revision C:2014 HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLARELESS WITH LOCKWIRE HOLE
MIL-DTL-52471-1 Revision C:2008 HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100R1, SINGLE-WIRE BRAIDED REINFORCEMENT HOSE
ABMA/ISO 13417:1997 (S2010) AEROSPACE - AIRFRAME NEEDLE TRACK ROLLER, STUD TYPE, SINGLE-ROW, SEALED - METRIC SERIES
MIL-DTL-52525-6 Revision C:2008 FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE
MIL-DTL-83798-4 Revision D:2017 Fittings, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, Straight
MS51507 Revision D:2017 ELBOW, TUBE, 90 DEGREE, 37 DEGREE BULKHEAD, FLARED
MS51516 Revision C:2017 TEE, BULKHEAD ON RUN 37 DEGREE FLARED
MIL-DTL-32371-9 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Tee, Bulkhead, Spherical on Run
MS51508 Revision D:2017 ELBOW, PIPE TO TUBE, 45 DEGREE, MALE PIPE END, 37 DEGREE FLARED
MIL-DTL-52525-36 Revision B:2008 FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 90 DEGREES BENT TUBE
MIL-DTL-52525-15 Revision C:2008 FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 90 DEGREES BENT TUBE
PREN 4854-2 : 200P1 AEROSPACE SERIES - BEARING, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS - PART 2: DIMENSIONS AND LOADS FOR WIDE SERIES
ABMA ISO 14218 : 1997 AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, SELF-ALIGNING, SEALED, HEAVY DUTY - INCH SERIES
MS20761 Revision C:2016 ELBOW, FLARED TUBE, FLANGED, SWIVEL, 45 DEGREES
16/30340711 DC : 0 BS EN 16602-70-14 - SPACE PRODUCT ASSURANCE - CORROSION
ISO 14217:1998 Aerospace — Airframe ball bearings, double-row, self-aligning, precision, sealed, heavy duty — Inch series
SAE AS27648E:2023 BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTERNAL SELF-ALIGNING, EXTRA LIGHT DUTY
MIL-B-8952 Revision B:1995 BEARING, ROLLER, ROD END, ANTIFRICTION, SELF-ALIGNING
MIL-DTL-32460-8 Base Document:2013 FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL
MS35759 Revision C:2008 CUPS, GREASE, AUTOMATIC FEED
ABMA ISO 13413 : 1998 AEROSPACE - AIRFRAME NEEDLE TRACK ROLLER, YOKE TYPE, DOUBLE-ROW, SEALED - INCH SERIES
ABMA ISO 14221 : 1998 AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, SELF-ALIGNING, PRECISION, SEALED, LIGHT DUTY - INCH SERIES
MIL-DTL-32464-7 Base Document:2013 MALE ADAPTER, 45 DEGREES ELBOW, BULKHEAD, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI
ISO 13415:1997 Aerospace — Airframe needle track roller, stud type, single-row, sealed — Inch series
MS39207 Revision H:2018 Elbows, Tube - Safety Sleeve Compression Type, 90 Degree
MIL-DTL-32464-2 Base Document:2013 MALE ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI
SAE AS 81934 : 2016 BEARINGS, SLEEVE, PLAIN AND FLANGED, SELF-LUBRICATING
ISO 14203:1998 Aerospace — Airframe ball bearings, single-row, rigid, diameter series 8 and 9 — Metric series
MIL-DTL-32464-4 Base Document:2013 MALE ADAPTER, TEE, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 37 DEGREES SPHERICAL ON BRANCH, 1500-3000 PSI
MIL-DTL-83798-5 Revision E:2017 Fittings, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, 45 Degrees
MIL-DTL-32464-8 Base Document:2013 MALE ADAPTER, 90 DEGREES ELBOW, BULKHEAD, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI
ABMA ISO 14220 : 1998 AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, SELF-ALIGNING, SEALED, LIGHT DUTY - INCH SERIES
MIL-DTL-32480-3 Base Document:2014 Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Male
ABMA ISO 14202 : 1997 AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, DIAMETER SERIES 0 AND 2 - METRIC SERIES
MIL-DTL-52525-13 Revision C:2008 FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE STRAIGHT
MIL-DTL-32464 Revision A:2017 FITTINGS, ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES SPHERICAL TO ANPT CONNECTORS, 1500 TO 3000 PSI, GENERAL SPECIFICATION FOR
MIL C 38271 : B CONNECTOR, OXYGEN MASK TO REGULATOR CRU-60/P
MIL-DTL-32464-10 Base Document:2013 MALE ADAPTER, LONG, NIPPLE TUBE, HYDRAULIC AND PNEUMATIC TUBE, LONG HEX, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI
MIL-DTL-32371 Base Document:2012 Fittings, Adapter, Hydraulic and Pneumatic, Spherical to ORFS Connectors, 1500 to 3000 PSI, General Specification for
MIL-DTL-32460-5 Base Document:2013 FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD
MIL-DTL-32460-7 Base Document:2013 FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL
MS27611 Revision H:2018 VALVE, HYDRAULIC BLEEDER, AIRCRAFT WHEEL BRAKE
MIL-DTL-32464-5 Base Document:2013 MALE ADAPTER, NIPPLE TUBE, HYDRAULIC AND PNEUMATIC, REGULAR HEX, 37 DEGREES SPHERICAL TO NPTF, 1500-3000 PSI
ISO 14201:1998 Aerospace — Airframe ball bearings, double-row, self-aligning, diameter series 2 — Metric series
ABMA ISO 14209 : 1997(S2010) AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, PRECISION, SEALED, INTERMEDIATE DUTY - INCH SERIES
ABMA ISO 14217 : 1997(S2010) AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, SELF-ALIGNING, PRECISION, SEALED, HEAVY DUTY - INCH SERIES
ANSI/ABMA/ISO 14206:1998 (S2010) AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, SEALED, LIGHT DUTY - INCH SERIES
ABMA ISO 14216 : 1997 AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, SELF-ALIGNING, SEALED, HEAVY DUTY - INCH SERIES
ABMA ISO 13416 : 1997 AEROSPACE - AIRFRAME NEEDLE TRACK ROLLER, YOKE TYPE, SINGLE-ROW, SEALED - METRIC SERIES
ISO 14214:1998 Aerospace — Airframe ball bearings, double-row, rigid, sealed, heavy duty — Inch series
SAE AS 82819 : 2013 BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, 300 CPM OSCILLATION (13 FPM), -65 TO +160 DEGREES F (-54 TO +71 DEGREES C), LINERS LESS THAN 0.015 INCHES
MIL C 83867 : B CONNECTOR, OXYGEN MASK HOSE NON-EJECTION TYPE
ABMA ISO 14201 : 1998 AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, SELF-ALIGNING, DIAMETER SERIES 2 - METRIC SERIES
ABMA ISO 14204 : 1998 AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, RIGID, DIAMETER SERIES 0 - METRIC SERIES
ABMA ISO 14208 : 1997(S2010) AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, SEALED, INTERMEDIATE DUTY - INCH SERIES
MIL-DTL-52525-5 Revision D:2011 FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT
MIL-DTL-52525-34 Revision B:2008 FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, STRAIGHT
MIL-DTL-52525-2 Revision C:2008 FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE
ABMA ISO 14213 : 1997 AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, PRECISION, SEALED, TORQUE TUBE DESIGN, EXTRA-LIGHT DUTY - INCH SERIES
MIL-DTL-18866 Revision J:2015 Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, General Specification for
MS39202 Revision G:2012 ELBOWS, PIPE TO TUBE - SAFETY SLEEVE COMPRESSION TYPE, 90 DEGREE, MALE PIPE END
MS39201 Revision G:2012 NIPPLE, TUBE-SAFETY SLEEVE COMPRESSION TYPE
ISO 14208:1998 Aerospace — Airframe ball bearings, single-row, rigid, sealed, intermediate duty — Inch series
MS20762 Revision D:2016 ELBOW, FLARED TUBE, FLANGED, SWIVEL, 90 DEGREES
MIL-DTL-32460-1 Base Document:2013 FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE
ISO 14206:1998 Aerospace — Airframe ball bearings, single-row, rigid, sealed, light duty — Inch series
MIL-DTL-6193 Revision E:2017 JOINTS, UNIVERSAL, PLAIN, LIGHT AND HEAVY DUTY, GENERAL SPECIFICATION FOR
MS39324 Revision C:2017 ADAPTER, 37 DEGREE, FLARE TO 'O' RING BOSS, 45 DEGREE FLARE
MS51842 Revision E:2017 ELBOW, TUBE TO BOSS 45 DEGREE, O-RING, FLARELESS TYPE, HYDRAULIC
MIL-DTL-62011-1 Base Document:2009 PUMP, FUEL, ELECTRICALLY-OPERATED: 24-VOLT DC, IN-TANK TYPE, TOP-MOUNTED CONNECTOR, TYPE 1
MIL-DTL-32460-6 Base Document:2013 FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD
MIL-DTL-83796-1 Revision C:2014 HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE
MIL-DTL-32460 Revision A:2017 ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE TUBE FITTING TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F, GENERAL SPECIFICATION FOR
MIL-DTL-83798 Revision D:2008 FITTING, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR
AN924 Revision 14:2018 NUT, TUBE, BULKHEAD AND UNIVERSAL FITTING
MS51522 Revision C:2017 ELBOW, TUBE, 45 DEGREE SWIVEL, 37 DEGREE FLARED
MIL-DTL-83796-13 Base Document:2008 Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flareless to Flareless, with Lockwire Hole
MS51512 Revision D:2017 TEE, PIPE TO TUBE, MALE PIPE ON BRANCH, 37 DEGREE FLARED
MIL-DTL-52525-3 Revision D:2011 FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, SHORT DROP
MS51531 Revision B:1985 NUT, TUBE COUPLING, 37 DEGREE FLARED
MS39322 Revision B:2017 ADAPTER: 37 DEGREE FLARE, FEMALE SWIVEL TO WELD SOCKET, 3/4 INCH TO 1 INCH
MIL-DTL-32464-11 Base Document:2013 MALE ADAPTER, BULKHEAD, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI
MS51533 Revision A:1979 SLEEVE, COMPRESSION, TUBE FITTING, 37 DEGREE FLARED
MS51526 Revision A:1979 ADAPTER, STRAIGHT, TUBE TO BOSS, O-RING, 37 DEGREE FLARED (LONG)
MS20756 Revision F:2011 FLANGE, SWIVEL, RETAINING
MS51530 Revision B:1988 FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; TEE, TUBE TO BOSS, BOSS ON RUN, O-RING, 37 DEGREE FLARED
MIL-DTL-32372-11 Revision A:2017 Fitting, Adapter, Tee, Hydraulic and Pneumatic, ORFS Male to ORFS Female Swivel to NPTF Male on Branch
MIL-DTL-52525-9 Revision C:2008 FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT
MIL-DTL-83796-3 Revision C:2014 HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLARELESS
SAE AS 8914 : 2016 BEARING, ROLLER, SELF-ALIGNING, AIRFRAME, ANTIFRICTION
PREN 16602-70-14 : DRAFT 2016 SPACE PRODUCT ASSURANCE - CORROSION
ABMA ISO 14194 : 1998 AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, DOUBLE-ROW, SELF-ALIGNING, SEALED, EXTENDED INNER RING, HEAVY DUTY - INCH SERIES
ABMA ISO 14193 : 1998 AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, SINGLE-ROW, SELF-ALIGNING, SEALED, EXTENDED INNER RING, INTERMEDIATE DUTY - INCH SERIES
ISO 14192:1998 Aerospace — Airframe spherical roller bearings, single row, self-aligning, shielded, intermediate duty — Metric series
ISO 14204:1998 Aerospace — Airframe ball bearings, double-row, rigid, diameter series 0 — Metric series
ISO 14196:1998 Aerospace — Airframe spherical roller bearings, double row, self-aligning, sealed, plain inner ring, heavy duty — Inch series
15/30281806 DC : 0 BS A 401 TO A 420 - AEROSPACE SERIES - SPECIFICATION FOR SCREWS, PAN AND 100 DEGREES COUNTERSUNK HEAD, HEXALOBULAR DRIVE RECESS (UNIFIED THREADS BELOW 1/4 INCH), VARIOUS MATERIALS
NASA STD 6012 : 2012 CORROSION PROTECTION FOR SPACE FLIGHT HARDWARE
MIL-DTL-52525-17 Revision C:2008 FITTINGS, CLAMP-HALVES, FLANGE TO PORT, FOR 4-BOLT SPLIT-FLANGE
MIL-DTL-52525-31 Revision B:2008 FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL
ABMA ISO 14192 : 1998 AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, SINGLE-ROW, SELF-ALIGNING, SHIELDED, INTERMEDIATE DUTY - METRIC SERIES
ABMA ISO 13415 : 1997 AEROSPACE - AIRFRAME NEEDLE TRACK ROLLER, STUD TYPE, SINGLE-ROW, SEALED - INCH SERIES
MIL-DTL-52525 Revision F:2008 FITTINGS, HOSE, HYDRAULIC, REUSABLE, FIELD-ATTACHABLE AND CLAMP-HALVES, TO MATE WITH SAE-J517 TYPE HOSES, GENERAL SPECIFICATION FOR
MIL-DTL-32480-2 Base Document:2014 Fitting, Adapter, 45 Degree Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Male
MIL-PRF-83867 Revision D:2007 Connector, Oxygen Mask Hose, Non-Ejection Type
MIL-DTL-32480-8 Base Document:2014 Fitting, Adapter, 45 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel
MIL-DTL-32460-4 Base Document:2013 FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD
MIL-DTL-32372-5 Revision A:2017 Fitting, Adapter, 45 Degree, Hydraulic and Pneumatic, NPTF Male to ORFS Bulkhead
MIL-DTL-32464-3 Base Document:2013 MALE ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI
16/30354035 DC : 0 BS EN 4854-2 - AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS, WIDE SERIES - DIMENSIONS AND LOADS
MIL-DTL-52471-8 Revision B:2008 HOSE ASSEMBLIES, RUBBER: HYDRAULIC PRESSURE-TYPE; TYPE 100RE
MIL-DTL-32460-9 Base Document:2013 FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL
MIL-DTL-32464-9 Base Document:2013 MALE ADAPTER, TEE, BULKHEAD, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 37 DEGREES SPHERICAL ON RUN, 1500-3000 PSI
MS51818 Revision E:1987 TEE, PIPE TO TUBE, MALE PIPE ON BRANCH, FLARELESS TYPE, HYDRAULIC
SAE AS 7949 : 2004 BEARINGS, BALL, AIRFRAME, ANTIFRICTION, GENERAL STANDARD
MIL-DTL-32371-1 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Straight
MIL-DTL-52525-37 Revision B:2008 FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT
MIL-DTL-52471-2 Revision C:2008 HOSE ASSEMBLIES, RUBBER: HYDRAULIC PRESSURE-TYPE; TYPE 100R2, DOUBLE-WIRE BRAIDED REINFORCEMENT HOSE
MIL-DTL-52525-16 Revision D:2008 FITTINGS, CLAMP-HALVES, FOR 4-BOLT SPLIT-FLANGE, SAE-J518, TYPE SPLIT-FLANGE CLAMP (SFC)
MS27404 Revision C:2017 ADAPTER, STRAIGHT, REUSABLE, TUBE TO HOSE, LOW PRESSURE
MIL-DTL-52471-3 Revision C:2008 HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100RE, FOUR-WIRE BRAIDED REINFORCEMENT OR MULTIPLE WIRE BRAIDED STEEL WIRE REINFORCED HOSE
MS51841 Revision E:2017 TEE, TUBE TO BOSS, BOSS ON BENCH, O-RING, FLARELESS TYPE, HYDRAULIC
SAE AS 81819 : 2010 BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, HIGH SPEED OSCILLATION -65 TO +160 DEGREES F GENERAL SPECIFICATION FOR
ISO 13413:1997 Aerospace — Airframe needle track roller, yoke type, double-row, sealed — Inch series
ISO 14191:1998 Aerospace — Airframe spherical roller bearings, single row, self-aligning, diameter series 3 and 4 — Metric series
SAE AS 83819 : 2013 BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, 1400 CPM (15 FPM), OSCILLATION, -65 TO +160 DEGREES F (-54 TO +71 DEGREES C)
SAE AS 12500 : 2018 CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES
ABMA ISO 14219 : 1997(S2010) AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, SELF-ALIGNING, PRECISION, SEALED, HEAVY DUTY - INCH SERIES
ISO 14216:1998 Aerospace — Airframe ball bearings, double-row, self-aligning, sealed, heavy duty — Inch series
ISO 14210:1998 Aerospace — Airframe ball bearings, single-row, rigid, sealed, torque tube design, light duty — Inch series
BS A 401-420:2015 Specification for screws, pan and 100° countersunk head, hexalobular drive recess (unified threads below ¼ inch) in various materials
ABMA ISO 14214 : 1997(S2010) AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, RIGID, SEALED, HEAVY DUTY - INCH SERIES
MIL-DTL-32372-1 Revision A:2017 Fitting, Adapter, Straight, Hydraulic and Pneumatic, NPTF Male to ORFS Male
MS51517 Revision C:2017 CROSS, TUBE, 37 DEGREE FLARED
MIL-DTL-32371-8 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 90 Degree Elbow, Bulkhead
ISO 14209:1998 Aerospace — Airframe ball bearings, single-row, rigid, precision, sealed, intermediate duty — Inch series
MIL-DTL-32480-9 Base Document:2014 Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel
MIL-DTL-32371-5 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Union Cross, Spherical on Branch
MIL-DTL-32371-7 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 45 Degrees Elbow, Bulkhead
MS51500 Revision F:2017 FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, ADAPTER, STRAIGHT, PIPE TO TUBE, MALE END, 37 DEGREE FLARED
ABMA ISO 14207 : 1998 AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, PRECISION, SEALED, LIGHT DUTY - INCH SERIES
MS51505 Revision C:2016 ELBOW, TUBE, 90 DEGREE, 37 DEGREE FLARED
MIL-DTL-32480-4 Base Document:2014 Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless Male to ORFS Bulkhead
ABMA ISO 14191 : 1997(S2010) AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, SINGLE-ROW, SELF-ALIGNING, DIAMETER SERIES 3 AND 4 - METRIC SERIES
MS51519 Revision C:2017 NIPPLE, TUBE, LARGE HEX, FOR USE WITH O-RING, 37 DEGREE FLARED
MIL-DTL-52525-45 Base Document:2008 FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 90 DEGREES BENT TUBE
MIL-DTL-52525-39 Revision B:2008 FITTINGS, HOSE, SCREW-ON TO 37DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE
MS51513 Revision D:2017 TEE, PIPE TO TUBE, FEMALE PIPE ON BRANCH, 37 DEGREE FLARED
MIL-DTL-52525-8 Revision C:2008 FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, LONG DROP
MIL-DTL-32371-2 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 45 Degrees Elbow
MS51527 Revision D:2000 Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, Steel; Elbow, Tube to Boss, 90 Degree, O-Ring, 37 Degree Flared
MS51506 Revision E:2017 FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, ELBOW, PIPE TO TUBE, 90 DEGREE, FEMALE PIPE END, 37 DEGREE FLARED
ABMA ISO 13412 : 1998 AEROSPACE - AIRFRAME NEEDLE TRACK ROLLER, YOKE TYPE, SINGLE-ROW, SEALED - INCH SERIES
MS51815 Revision F:1987 ELBOW PIPE TO TUBE 90 DEGREE, MALE PIPE END, FLARELESS TYPE, HYDRAULIC
MS51523 Revision C:2017 TEE, TUBE TO SWIVEL, SWIVEL ON RUN, 37 DEGREE FLARED
MS39323 Revision C:2017 FITTING, TUBE, REDUCER: 37 DEGREE FLARE
MIL-DTL-52525-7 Revision D:2011 FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, SHORT DROP
MIL-DTL-52525-14 Revision C:2008 FITTINGS, HOSE CRIMP TYPE, SPLIT-FLANGE 45 DEGREES BENT
MIL-DTL-83796-12 Base Document:2008 HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, INTERNAL SUPPORT COIL, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLARELESS
ABMA ISO 13414 : 1998 AEROSPACE - AIRFRAME NEEDLE ROLLER BEARINGS, SINGLE-ROW, SHIELDED - INCH SERIES
ABMA ISO 14197 : 1997 AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, SINGLE-ROW, SELF-ALIGNING, SEALED, INTERMEDIATE DUTY - INCH SERIES
MS51812 Revision F:1987 NIPPLE, TUBE, BULKHEAD, FLARELESS TYPE HYDRAULIC
MS51515 Revision D:2017 TEE, TUBE, BULKHEAD ON BRANCH, 37 DEGREE FLARED
MS51511 Revision D:2017 TEE, PIPE TO TUBE, MALE PIPE ON RUN, 37 DEGREE FLARED
MIL-DTL-52525-41 Revision A:2008 FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 45 DEGREES BENT TUBE
MIL-DTL-52525-42 Revision B:2008 FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE 90 DEGREES BENT
MS51817 Revision E:1987 ELBOW, PIPE TO TUBE, 45 DEGREE MALE PIPE END, FLARELESS TYPE, HYDRAULIC
MS51820 Revision E:1987 ELBOW, TUBE, 90 DEGREE, FLARELESS TYPE, HYDRAULIC
MS51518 Revision C:2017 PLUG, MACHINE THREAD, 37 DEGREE FLARED
MS51813 Revision E:1987 ELBOW, PIPE TO TUBE 90 DEGREE, FEMALE PIPE END, FLARELESS TYPE, HYDRAULIC
MIL-DTL-83798-2 Revision D:2017 Fittings, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel Nut, 45 Degrees
MIL-DTL-52525-12 Revision D:2011 FITTINGS, HOSE, SCREW ON TO SPLIT-FLANGE 90 DEGREES BENT
MIL-DTL-32460-2 Base Document:2013 FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE
MIL-DTL-52525-33 Revision A:2008 FITTINGS, WIRE REINFORCED HYDRAULIC HOSE AND CLAMP-HALVES: FIELD ATTACHABLE (REUSABLE), SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, FOR USE WITH TYPE 100RE FOUR-SPRIAL-WRAP REINFORCEMENT HOSE
ABMA ISO 14195 : 1998 AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, DOUBLE-ROW, SELF-ALIGNING, SEALED, TORQUE TUBE DESIGN, LIGHT DUTY - INCH SERIES
ABMA ISO 14212 : 1997 AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, SEALED, TORQUE TUBE DESIGN, EXTRA-LIGHT DUTY - INCH SERIES
ABMA ISO 14203 : 1998 AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, DIAMETER SERIES 8 AND 9 - METRIC SERIES
MIL-DTL-52525-40 Revision B:2008 FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, STRAIGHT
MIL-DTL-52525-4 Revision D:2011 FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, LONG DROP
MS51503 Revision C:2016 ADAPTER, STRAIGHT, PIPE TO TUBE, FEMALE PIPE END, 37 DEGREE FLARED
MS51514 Revision D:2017 TEE, PIPE TO TUBE, FEMALE PIPE ON RUN 37 DEGREE FLARED
MS51502 Revision C:2016 NIPPLE TUBE, REGULAR HEX, 37 DEGREE FLARED, LONG
MIL-DTL-83798-6 Revision D:2017 Fittings, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, 90 Degrees
MIL-DTL-62011 Revision E:2009 Pump, Fuel, Electrically-Operated: 24-Volt DC, In-Tank Type, General Specification for
MIL-DTL-32372-3 Revision A:2017 Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, NPTF Male to ORFS Male
MS51529 Revision B:1988 FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; TEE, TUBE TO BOSS, BOSS ON BRANCH, O-RING
MIL-DTL-32372-10 Revision A:2017 Fitting, Adapter, Tee, Hydraulic and Pneumatic, ORFS Female Run to Run to NPTF Male on Branch
ABMA ISO 14196 : 1998 AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, DOUBLE-ROW, SELF-ALIGNING, SEALED, PLAIN INNER RING, HEAVY DUTY - INCH SERIES
MIL-DTL-83796-2 Revision C:2014 HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE, WITH LOCKWIRE HOLE
MIL-DTL-83798-1 Revision D:2017 Fittings, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel Nut, Straight
MIL-DTL-83798-3 Revision D:2017 Fittings, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel Nut, 90 Degrees
PREN 4854-1 : 200P1 AEROSPACE SERIES - BEARING, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS - PART 1: DIMENSIONS AND LOADS FOR NARROW SERIES
ABMA/ISO 14215:1998(S2010) AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, RIGID, PRECISION, SEALED, HEAVY DUTY - INCH SERIES
ISO 14202:1998 Aerospace — Airframe ball bearings, single-row, rigid, diameter series 0 and 2 — Metric series
SAE AS 81820 : 2014 BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LOW SPEED OSCILLATION

SAE AMS 2750 : 2012 PYROMETRY
SAE AMS 2759/9 : 2009 HYDROGEN EMBRITTLEMENT RELIEF (BAKING) OF STEEL PARTS
SAE AS 2390 : 2013(R2019) CHEMICAL PROCESS TEST SPECIMEN MATERIAL

View more information
£85.05
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.