• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

SAE ARP 4926 : 2011

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

ALLOY VERIFICATION AND CHEMICAL COMPOSITION INSPECTION OF WELDING WIRE

Superseded date

21-08-2021

Published date

01-01-2011

1 SCOPE
2 APPLICABLE DOCUMENTS
3 TECHNICAL REQUIREMENTS
4 QUALITY ASSURANCE PROVISIONS
5 REJECTION
6 NOTES

Specifies procedures for welding wire verification and conformance to specification composition.

Committee
AMS-B
DocumentType
Standard
PublisherName
SAE International
Status
Superseded
SupersededBy

SAE AMS 4955 : 2016 TITANIUM ALLOY, WELDING WIRE 8AL - 1MO - 1V
SAE AMS 4191 : 2015 ALUMINUM ALLOY, WELDING WIRE, 6.3CU - 0.30MN - 0.18ZR - 0.15TI - 0.10V (2319)
SAE AMS 5839 : 2015 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 59NI - 22CR - 2.0MO - 14W - 0.35AL
SAE AMS 4233 : 2014 ALUMINUM ALLOY, WELDING WIRE, 4.5CU - 0.70AG - 0.30MN - 0.25MG - 0.25TI (201)
SAE AMS 4245 : 2017 ALUMINUM ALLOY, WELDING WIRE, 5.0SI - 1.2CU - 0.50MG (C355.0)
SAE AMS 5034 : 2015 STEEL, WELDING WIRE, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130)
SAE AMS 6469 : 2016 STEEL, WELDING WIRE, 1.75MN - 0.78CR - 2.8NI - 0.85MO - (0.09 - 0.12C), VACUUM MELTED, ENVIRONMENT-CONTROLLED PACKAGING
SAE AMS 4399 : 2016 MAGNESIUM ALLOY WELDING WIRE, 5.1Y - 3.0RE - 0.7ZR (WE54A)
SAE AMS 5035 : 2014 STEEL, WELDING WIRE, 0.65SI - 1.25CR - 0.50MO - 0.30V (0.28 - 0.33C)
SAE AMS5808D:2018(R2022) Steel, Corrosion- and Heat-Resistant, Welding Wire 19Cr - 13Ni - 2.5Mo High Ferrite Grade, Trace Element Controlled
SAE AMS5831E:2021 Iron-Nickel-Chromium-Cobalt Alloy, Corrosion and Heat-Resistant, Welding Wire 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta - 0.30Al - 0.05Zr - 0.05La - 0.20N
SAE AMS 5782 : 2013 STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 20.5CR - 9.0NI - 0.50MO - 1.5W - 1.2CB - 0.20TI, VACUUM INDUCTION MELTED
SAE AMS 5824F : 2017 STEEL, CORROSION-RESISTANT, WELDING WIRE 17CR - 7.1NI - 1.0AL
SAE AMS 5966 : 2013 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, WELDING WIRE, 50NI - 20CR - 20CO - 5.9MO - 2.2TI - 0.45AI, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED
SAE AMS 6459 : 2012 STEEL, WELDING WIRE, 1.0CR - 1.0MO - 0.12V (0.18 - 0.23C), VACUUM MELTED
SAE AMS 5821 : 2011 STEEL, CORROSION-RESISTANT, WELDING WIRE 12CR (SAE 51410 MODIFIED) FERRITE CONTROL GRADE
SAE AMS 6461L:2001(S2016) STEEL, WELDING WIRE 0.95CR - 0.20V (0.28 - 0.33C) (SAE 6130) VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING
SAE AMS 5796 : 2012 COBALT ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 52CO - 20CR - 10NI - 15W
SAE AMS 6533 : 2015 STEEL, WELDING WIRE 2.0CR - 10NI - 14CO - 1.0MO - (0.13 - 0.17C) VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING
SAE AMS 6456 : 2017 STEEL, WELDING WIRE, 0.80CR - 1.8NI - 0.25MO (0.35 - 0.40C) (SAE 4340 MOD), VACUUM MELTED, ENVIRONMENT-CONTROLLED PACKAGING
SAE AMS 5680 : 2011 STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE 18.5CR - 11NI - 0.40CB (NB) (SAE 30347)
SAE AMS 6468 : 2013 STEEL, WELDING WIRE, 1.0CR - 10NI - 3.8CO - 0.45MO - 0.08V (0.14 - 0.17C), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING
SAE AMS 4398 : 2016 MAGNESIUM ALLOY WELDING WIRE, 8.7AL - 0.70ZN - 0.26MN (AZ91E)
SAE AMS5802E : 2017 IRON-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 41FE - 37.5NI - 14CO - 4.8CB (NB) - 1.5TI, VACUUM MELTED, LOW EXPANSION
SAE AMS 4396 : 2016 MAGNESIUM ALLOY WELDING WIRE, 3.2 RARE EARTHS - 2.5ZN - 0.72ZR (EZ33A)
SAE AMS 5828 : 2012 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, WELDING WIRE 57NI - 19.5CR - 13.5CO - 4.2MO - 3.1TI - 1.4AL - 0.006B, VACUUM INDUCTION MELTED, SOLUTION HEAT TREATED
SAE MAM 5822 : 2000 STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE 11.8CR - 2.8NI - 1.6CO - 1.8MO - 0.32V VACUUM INDUCTION MELTED
SAE AMS 5804 : 2013 STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 15CR - 25.5NI - 1.3MO - 2.2TI - 0.006B - 0.30V
SAE AMS 5675H : 2014 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, WELDING WIRE, 70NI - 2.5MN - 15.5CR - 3.0TI - 7.0FE
SAE AMS 6465 : 2000(S2017) WIRE, STEEL WELDING, 2.0CR - 10NI - 8.0CO - 1.0MO - 0.02AL - 0.06V (0.10 - 0.14C) (HY-180), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING
SAE AMS5030K:2003(S2017) Steel, Welding Wire 0.06 Carbon, Maximum(STABILIZED Aug 2017)<br>
SAE AMS 4395 : 2016 MAGNESIUM ALLOY WELDING WIRE, 9.0AL - 2.0ZN (AZ92A)
SAE AMS 6375 : 2016 STEEL, WELDING WIRE, 0.50CR - 0.55NI - 0.20MO (0.18 - 0.23C) (SAE 8620), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING
SAE AMS 6453 : 2012(S2018) STEEL, WELDING WIRE, 0.30CR - 1.8NI - 0.40MO - (0.23 - 0.28C), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING
SAE AMS 5823 : 2012 STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE 11.8CR - 2.8NI - 1.6CO - 1.8MO - 0.32V
SAE AMS 6501 : 2017 STEEL, MARAGING, WELDING WIRE, 18NI - 8.0CO - 4.9MO - 0.40TI - 0.10AL, VACUUM INDUCTION MELTED, ENVIRONMENT CONTROLLED PACKAGING
SAE AMS 5800 : 2006 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 54NI - 19CR - 11CO - 10MO - 3.2TI - 1.5AL - 0.006B, VACUUM INDUCTION MELTED
SAE AMS 5803 : 2015 STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE 16.4CR - 4.8NI - 0.22CB (NB) - 3.6CU CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED
SAE AMS 6466 : 2017 STEEL, CORROSION-RESISTANT, WELDING WIRE, 5.2CR - 0.55MO
SAE AMS 5696 : 2015 STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 19CR - 12.5NI - 2.5MO
SAE AMS 6452E : 2012(S2017) STEEL, WELDING WIRE, 0.95CR - 0.20MO (0.38 - 0.43C), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING
SAE AMS 5786 : 2015 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 62.5NI - 5.0CR - 24.5MO - 5.5FE
SAE AMS 6457E : 2017 STEEL, WELDING WIRE, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING
SAE AMS 5682 : 2012 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 78NI - 20CR
SAE AMS 5830 : 2012 NICKEL-IRON ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 12.5CR - 42.5NI - 6.0MO - 2.7TI - 0.015B - 35FE
SAE AMS 5808 : 2018 STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 19CR - 13NI - 2.5MO, HIGH FERRITE GRADE, TRACE ELEMENT CONTROLLED
SAE AMS 5837G : 2012 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 62NI - 21.5CR - 9.0MO - 3.7CB(NB)
SAE AMS 5835 : 2015 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 72NI - 3.2MN - 20CR - 2.5CB - 0.48TI, VACUUM INDUCTION MELTED, ENVIRONMENT CONTROLLED PACKAGING
SAE AMS 4391 : 2016 MAGNESIUM ALLOY WELDING WIRE, 2.8ND - 1.4GD - 0.4ZN - 0.6ZR (EV31A)
SAE AMS 5027 : 2012 WELDING WIRE 1.05CR - 0.55NI - 1.0MO - 0.08V (0.26 - 0.32C) VACUUM MELTED, ENVIRONMENT-CONTROLLED PACKAGING
SAE AMS 5028 : 2013 STEEL, WELDING WIRE, 1.05CR - 0.55NI - 1.0MO - 0.07V (0.34 - 0.40C) (D6AC), VACUUM MELTED, ENVIRONMENT-CONTROLLED PACKAGING
SAE AMS4181C:2003(R2014) ALUMINUM ALLOY, WELDING WIRE, 7.0SI - 0.38MG - 0.10TI (4008 OR 356)
SAE AMS 4246 : 2015 ALUMINUM ALLOY, WELDING WIRE, 7.0SI - 0.52MG (357)
SAE AMS 6460 : 2015 WIRE, STEEL WELDING, 0.75SI - 0.62CR - 0.20MO - 0.10ZR (0.10 - 0.17C)
SAE AMS 4951 : 2017 TITANIUM WELDING WIRE COMMERCIALLY PURE ENVIRONMENT CONTROLLED PACKAGING
SAE AMS 4954 : 2017 TITANIUM ALLOY, WELDING WIRE 6AL - 4V
SAE AMS 5832 : 2015 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, WELDING WIRE, 52.5NI - 19CR - 3.0MO - 5.1CB(NB) - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED
SAE AMS 4956 : 2016 TITANIUM ALLOY WELDING WIRE, 6AL - 4V, EXTRA LOW INTERSTITIAL, ENVIRONMENT CONTROLLED PACKAGING
SAE AMS 5831 : 2015 ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 29FE - 22CR - 21NI - 18.5CO - 3.2MO - 2.8W - 0.78TA - 0.30AL - 0.05ZR - 0.05LA - 0.20N
SAE AMS 5964 : 2012 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE NI - 18CR - 2.8MO - 5.5CB(NB) - 0.70TI - 1.50AL - 10FE - 9CO - 1W CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED
SAE AMS 5784 : 2011 STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE 29CR - 9.5NI
SAE AMS 5812 : 2015 STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 15CR - 7.1NI - 2.4MO - 1.0AL, VACUUM INDUCTION MELTED
SAE AMS 5694 : 2018 STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 27CR - 21.5NI
SAE AMS 5774 : 2015 STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE 16.5CR - 4.5NI - 2.9MO - 0.10N
SAE AMS 4189 : 2016 ALUMINUM ALLOY WELDING WIRE, 4.1SI-0.20 MG (4643)
SAE AMS 5817 : 2011 STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 13CR - 2.0NI - 3.0W
SAE AMS 5692 : 2011 STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 19CR - 12.5NI - 2.5MO
SAE AMS 5836 : 2015 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 72NI - 3.0MN - 20CR - 2.5CB(NB)
SAE AMS 5825 : 2017 STEEL, CORROSION-RESISTANT, WELDING WIRE 16.4CR - 4.8NI - 0.22CB(NB) - 3.6CU
SAE AMS 5789 : 2014 COBALT ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE 54CO - 25.5CR - 10.5NI - 7.5W
SAE AMS 5029 : 2013 STEEL, WELDING WIRE, 0.78CR - 1.8NI - 0.35MO - 0.20V (0.33 - 0.38C) (4335 MOD), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING
SAE AMS 5776 : 2008(R2015) STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 12.5CR (SAE 51410)
SAE AMS 4952 : 2015 TITANIUM ALLOY, WELDING WIRE, 6AI - 2SN - 4ZR - 2MO
SAE AMS 5829 : 2011 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 56NI - 19.5CR - 16.5CO - 2.5TI - 1.5AL, VACUUM INDUCTION MELTED
SAE AMS 5818 : 2013 STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 9.0MN - 20CR - 6.2NI - 0.20N
SAE AMS 5814 : 2011 COBALT ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 52CO - 20CR - 20NI - 7.5TA, VACUUM MELTED
SAE AMS 5778 : 2015 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, WELDING WIRE, 72NI - 15.5CR - 1.0CB(NB) - 2.4TI - 0.70AL - 7.0FE
SAE AMS 5679 : 2015 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, WELDING WIRE, 73NI - 15.5CR - 2.2CB - 8.0FE
SAE AMS 4394 : 2016 MAGNESIUM ALLOY WELDING WIRE 2.5AG - 2.1DI - 0.70ZR (QE22A)
SAE AMS 4400 : 2016 Magnesium Alloy Welding Wire 1.5Ag - 2.1Di - 0.08Cu - 0.70Zr (EQ21A)
SAE AMS 4190 : 2015 ALUMINUM ALLOY, WELDING WIRE 5.2SI (4043)
SAE AMS 6462 : 2016 STEEL, WELDING WIRE, 0.95CR - 0.20V (0.28 - 0.33C) (SAE 6130)
SAE AMS 5822 : 2011 STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 11.8CR - 2.8NI - 1.6CO - 1.8MO - 0.32V, VACUUM INDUCTION MELTED
SAE AMS 5805 : 2012 STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.004B - 0.30V, VACUUM INDUCTION MELTED, ENVIRONMENT CONTROLLED PACKAGING
SAE AMS 5794 : 2002(R2013) IRON ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 31FE - 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0CB - 0.15N, ANNEALED
SAE AMS 4953 : 2015 TITANIUM ALLOY WELDING WIRE, 5AL - 2.5SN
SAE AMS 4393 : 2016 MAGNESIUM ALLOY WELDING WIRE, 4.0Y - 2.3ND - 0.7ZR (WE43B)
SAE AMS 5780 : 2018 STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 15.5CR - 4.5NI - 2.9MO - 0.10N
SAE AMS 5798 : 2016 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE 47.5NI - 22CR - 1.5CO - 9.0MO - 0.60W - 18FE
SAE AMS 5811 : 2012 STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 15CR - 30NI - 1.2MO - 2.2TI - 0.25AL - 0.001B - 0.030V (0.01 - 0.03C), VACUUM INDUCTION MELTED, ENVIRONMENT CONTROLLED PACKAGING
SAE AMS 4392 : 2016 MAGNESIUM ALLOY WELDING WIRE, 4.2ZN - 1.2 RARE EARTHS - 0.7ZR (ZE41A)
SAE AMS 5790 : 2014 STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE 20CR - 10NI - 0.75CB, HIGH FERRITE GRADE
SAE AMS 5840 : 2010 STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 13CR - 8.0NI - 2.3MO - 1.1AL, VACUUM MELTED
SAE AMS 5788 F: 2012 COBALT ALLOY, CORROSION AND HEAT-RESISTANT, HARD FACING RODS AND WIRE, 62CO - 29CR - 4.5W - 1.2C
SAE AMS 6463 : 2013 WIRE, STEEL WELDING, 18.5NI - 8.5CO - 5.2MO - 0.72TI - 0.10AL, (MARAGE 300), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING
SAE AMS 5826 : 2017 STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE 15CR - 5.1NI - 0.30CB(NB) - 3.2CU
SAE AMS 4244 : 2016 ALUMINUM ALLOY, WELDING WIRE, 4.6CU - 0.35MN - 0.25MG - 0.22TI FOR WELDING A206.0 TYPE ALLOYS
SAE AMS 5676 : 2011 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 80NI - 20CR
SAE AMS 6458 : 2016 STEEL, WELDING WIRE 0.65SI - 1.25CR - 0.50MO - 0.30V (0.28 - 0.33C) VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING
SAE AMS5796F:2018(R2023) Cobalt Alloy, Corrosion- and Heat-Resistant, Welding Wire 52Co - 20Cr - 10Ni -15W
SAE AMS6463G:2023 Wire, Steel Welding 18.5Ni - 8.5Co - 5.2Mo - 0.72Ti - 0.10Al (Marage 300) Vacuum Melted, Environment Controlled Packaging

ASTM E 2371 : 2013 Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)
EN 14242:2004 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis
ASTM E 350 : 2012-09 TEST METHODS FOR CHEMICAL ANALYSIS OF CARBON STEEL, LOW-ALLOY STEEL, SILICON ELECTRICAL STEEL, INGOT IRON, AND WROUGHT IRON
ASTM E 1409 : 2013 : REDLINE Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion
ASTM E 353 : 2014 : REDLINE Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
ASTM E 354 : 2014 : REDLINE Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys

Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.