• Shopping Cart
    There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert
Meet Inform Select. Always-on access to the Standards your organisation relies on. Explore Inform Select

UNE-EN ISO 7393-1:2000

Current

Current

The latest, up-to-date edition.

WATER QUALITY. DETERMINATION OF FREE CHLORINE AND TOTAL CHLORINE. PART 1: TITRIMETRIC METHOD USING N, N-DIETHYL-1,4-PHENYLENEDIAMINE (ISO 7393-1:1985)

Available format(s)

Hardcopy , PDF

Language(s)

Spanish, Castilian, English

Published date

30-09-2000

£56.37
Excluding VAT

National foreword
0 Introduction
1 Scope and field of application
2 Definitions
3 Principle
4 Reagents
5 Apparatus
6 Procedure
7 Correction of interference due to the presence of
      oxidized manganese
8 Expression of results
9 Interferences
10 Test report
Annex A - Separate determinations of combined chlorine of
          the monochloramine type, combined chlorine of
          the dichloramine type and of combined chlorine
          in the form of nitrogen trichloride
Annex B - Preparation of water free from oxidizing and
          reducing substances
Bibliography
Table 1 - Terms and synonyms in relation to actual compounds
          in the solution
Table 2 - Analytical parameters from interlaboratory analysis
          for free residual chlorine

Defines a titrimetric procedure to determine free chlorine and total chlorine in water. This method applies to concentrations, in terms of chlorine, (Cl2), from 0,0004 to 0,07 mmol/l (0,03 to 5 mg/l) total chlorine and at higher concentrations by dilution of samples. For concentrations above 0,07 mmol/l, ISO 7393-3 also applies. Sea water and waters containing iodides and bromides require special procedures.

Committee
CTN 77/SC 1
DocumentType
Standard
Pages
18
PublisherName
Asociación Española de Normalización
Status
Current

£56.37
Excluding VAT