IEC 60060-2:2010
|
High-voltage test techniques - Part 2: Measuring systems
|
ISO 4892-1:2016
|
Plastics Methods of exposure to laboratory light sources Part 1: General guidance
|
IEC 60143-2:2012
|
Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks
|
IEC 60270:2000+AMD1:2015 CSV
|
High-voltage test techniques - Partial discharge measurements
|
IEC 60143-1:2015
|
Series capacitors for power systems - Part 1: General
|
IEC 62271-200:2011
|
High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
|
IEC 60099-4:2014
|
Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
|
CISPR 16-1-1:2015
|
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
|
IEC 62217:2012
|
Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria
|
IEC TS 60815-2:2008
|
Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 2: Ceramic and glass insulators for a.c. systems
|
EN 62271-203:2012
|
High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV
|
EN 60060-1:2010
|
High-voltage test techniques - Part 1: General definitions and test requirements
|
IEC 60068-2-11:1981
|
Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist
|
EN 60099-4:2014
|
Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
|
EN 60270:2001/A1:2016
|
HIGH-VOLTAGE TEST TECHNIQUES - PARTIAL DISCHARGE MEASUREMENTS (IEC 60270:2000/A1:2015)
|
IEC TS 60071-5:2002
|
Insulation co-ordination - Part 5: Procedures for high-voltage direct current (HVDC) converter stations
|
EN 60060-2:2011
|
High-voltage test techniques - Part 2: Measuring systems
|
EN 60143-2:2013
|
Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks
|
ISO 4892-3:2016
|
Plastics Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps
|
EN 60068-2-17:1994
|
Environmental testing - Part 2: Tests - Test Q: Sealing
|
IEC 60068-2-17:1994
|
Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing
|
IEC 62271-203:2011
|
High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV
|
IEC 60721-3-2:1997
|
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 2: Transportation
|
IEC 62271-1:2017
|
High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
|
CISPR TR 18-2:2017
|
Radio interference characteristics of overhead power lines and high-voltage equipment - Part 2: Methods of measurement and procedure for determining limits
|
IEC 60633:1998+AMD1:2009+AMD2:2015 CSV
|
Terminology for high-voltage direct current (HVDC) transmission
|
IEC 60071-2:1996
|
Insulation co-ordination - Part 2: Application guide
|
ISO 4892-2:2013
|
Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
|
EN 60071-2:1997
|
Insulation co-ordination - Part 2: Application guide
|
EN 60068-2-11:1999
|
Environmental testing - Part 2: Tests - Test Ka: Salt mist
|
EN 60721-3-2:1997
|
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 2: Transportation
|
IEC 60060-1:2010
|
High-voltage test techniques - Part 1: General definitions and test requirements
|
IEC 60507:2013
|
Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems
|
IEC 60071-1:2006+AMD1:2010 CSV
|
Insulation co-ordination - Part 1: Definitions, principles and rules
|
IEC 60068-2-14:2009
|
Environmental testing - Part 2-14: Tests - Test N: Change of temperature
|
IEC TS 60815-1:2008
|
Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 1: Definitions, information and general principles
|
EN 60068-2-14:2009
|
Environmental testing - Part 2-14: Tests - Test N: Change of temperature
|
EN 62217:2013
|
Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria
|
EN 62271-200:2012/AC:2015
|
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 200: AC METAL-ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV (IEC 62271-200:2011)
|
IEC TS 60815-3:2008
|
Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 3: Polymer insulators for a.c. systems
|
EN 55016-1-1:2010/A2:2014
|
SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-1: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - MEASURING APPARATUS (CISPR 16-1-1:2010/A2:2014)
|