• There are no items in your cart

AS 5100.8:2017

Current

Current

The latest, up-to-date edition.

Bridge design Rehabilitation and strengthening of existing bridges

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

03-31-2017

Preview

Sets out requirements and procedures for the repair or rehabilitation, extension of remaining service life, strengthening to restore capacity due to structural deterioration, strengthening to increase capacity for live load, and changing the function of and widening of existing bridges.

This Standard sets out minimum requirements and procedures to—(a) repair or rehabilitate a structure in order to restore it to its original or intended level of service;(b) extend the remaining service life of the structure;(c) strengthen a structure (because of structural deterioration) to restore its original capacity;(d) strengthen a structure to increase its capacity for live load (such as in response to a proposed increase in vehicle loads), barrier loading, collision loading, earthquake loading and other loading;(e) change the function of a structure (such as a road bridge to a pedestrian/cyclist bridge);(f) widen an existing structure; or (g) any combination of the above.Structures covered in this Part of the AS(AS/NZS) 5100 series include existing bridges (both superstructure and sub-structure) approach slabs, wing walls and buried culverts.NOTES: 1 Rehabilitation or strengthening may not be feasible for those structures that—(a) have substandard horizontal and vertical clearances;(b) have a poor alignment both on the structure and on the approaches;(c) have extensive deterioration of the substructure, including active scour undermining, pronounced seismic vulnerability, and/or questionable foundations;(d) have numerous deficiencies throughout the superstructure and/or substructure;(e) have deficient in situ strength; or(f) have structural systems that are non-redundant or incorporate poor details that require increased maintenance and inspection.2 All the requirements of this Standard may not be applicable to emergency response situations.

Committee
BD-090
DocumentType
Standard
ISBN
978 1 76035 721 4
Pages
130
ProductNote
Also numbered as AP-G51.8-17.
PublisherName
Standards Australia
Status
Current
Supersedes

First published as AS 5100.8:2017.

AS 5100.2:2017 Bridge design Design loads
AS 3507.2-2006 Non-destructive testing Radiographic determination of quality of ferrous castings
AS 5100.4:2017 Bridge design Bearings and deck joints
AS 5100.1:2017 Bridge design Scope and general principles
AS 5100.5:2017 Bridge design Concrete
AS/NZS 4058:2007 Precast concrete pipes (pressure and non-pressure)
AS 2574-2000 Non-destructive testing - Ultrasonic testing of ferritic steel castings (Reconfirmed 2022)
AS/NZS 1050.24:1994 Methods for the analysis of iron and steel Determination of aluminium content - Spectrophotometric method (Reconfirmed 2016)
AS/NZS 2041.2:2011 Buried corrugated metal structures Installation
AS/NZS 1252.2:2016 High-strength steel fastener assemblies for structural engineering - Bolts, nuts and washers Verification testing for bolt assemblies
AS 1597.2-2013 Precast reinforced concrete box culverts Large culverts (exceeding 1200 mm span or 1200 mm height and up to and including 4200 mm span and 4200 mm height)
AS 4544-2005 Non-destructive testing - Eddy current testing for the detection of surface flaws - Ferromagnetic and non-ferromagnetic metallic products
AS/NZS 1252.1:2016 High-strength steel fastener assemblies for structural engineering - Bolts, nuts and washers Technical requirements
AS/NZS 1050.2:1994 Methods for the analysis of iron and steel Determination of carbon content - Gravimetric method (Reconfirmed 2016)
AS 2452.3-2005 Non-destructive testing - Determination of thickness - Use of ultrasonic testing
AS/NZS 2312.2:2014 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings Hot dip galvanizing
AS/NZS 2312.1:2014 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings Paint coatings
AS 2062-1997 Non-destructive testing - Penetrant testing of products and components
AS/NZS 1050.38:1994 Methods for the analysis of iron and steel Determination of vanadium content - Flame atomic absorption spectrometric method (Reconfirmed 2016)
AS 3978-2003 Non-destructive testing - Visual inspection of metal products and components (Reconfirmed 2022)
AS/NZS 1554.1:2014 Structural steel welding Welding of steel structures
AS 1012.20.2:2016 Methods of testing concrete Determination of water-soluble chloride in aggregates and hardened concrete
AS 1012.20.1:2016 Methods of testing concrete Determination of chloride and sulfate in hardened concrete and aggregates - Nitric acid extraction method
AS 3799-1998 Liquid membrane-forming curing compounds for concrete (Reconfirmed 2018)
AS 2331.1.4-2001 Methods of test for metallic and related coatings Local thickness tests - Magnetic induction and eddy current methods
AS/NZS 1050.30:1994 Methods for the analysis of iron and steel Determination of boron content - Curcumin spectrophotometric method
AS 1065-1988 Non-destructive testing - Ultrasonic testing of carbon and low alloy steel forgings (Reconfirmed 2022)
AS/NZS 1050.28:1994 Methods for the analysis of iron and steel Vanadium in steel - Potentiometric method (Reconfirmed 2016)
AS 5100.3:2017 Bridge design Foundation and soil-supporting structures
AS 2207-2007 Non-destructive testing - Ultrasonic testing of fusion welded joints in carbon and low alloy steel (Reconfirmed 2017)
AS/NZS 2566.1:1998 Buried flexible pipelines Structural design
AS/NZS 2041.1:2011 Buried corrugated metal structures Design methods
AS 1391-2007 Metallic materials - Tensile testing at ambient temperature
AS 1544.2-2003 Method for impact tests on metals Charpy V-notch (Reconfirmed 2017)
AS 1012.9:2014 Methods of testing concrete Compressive strength tests - Concrete, mortar and grout specimens
AS 1214-1983 Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series)
AS 1710-2007 Non-destructive testing - Ultrasonic testing of carbon and low alloy steel plate and universal sections - Test methods and quality classification (Reconfirmed 2017)
SA TS 101:2015 Design of post-installed and cast-in fastenings for use in concrete
AS 2832.5-2008 Cathodic protection of metals Steel in concrete structures
AS/NZS 1050.8:1994 Methods for the analysis of iron and steel Determination of manganese content - Spectrophotometric method (Reconfirmed 2016)
AS/NZS 1050.6:1995 Methods for the analysis of iron and steel Determination of tin content - Flame atomic absorption spectrometric method (Reconfirmed 2016)
AS 3894.3-2002 Site testing of protective coatings Determination of dry film thickness (Reconfirmed 2013)
AS 4361.1-1995 Guide to lead paint management - Industrial applications
AS/NZS 3679.1:2016 Structural steel Hot-rolled bars and sections
AS 1012.8.3:2015 Methods of testing concrete Methods of making and curing concrete - Mortar and grout specimens
AS/NZS 1050.37:1994 Methods for the analysis of iron and steel Determination of copper content - Flame atomic absorption spectrometric method (Reconfirmed 2016)
AS 2028-1977 Methods for the measurement of the depth of hardening in flame and induction hardened steel products
AS/NZS 3725:2007 Design for installation of buried concrete pipes
AS/NZS 3679.2:2016 Structural steel Welded I sections
AS 5100.7:2017 Bridge design Bridge assessment
AS 5100.9:2017 Bridge design Timber
AS/NZS 2566.2:2002 Buried flexible pipelines Installation (Reconfirmed 2016)
AS 2832.3-2005 Cathodic protection of metals Fixed immersed structures
AS 2205.5.1-2003 Methods for destructive testing of welds in metal Macro metallographic test for cross-section examination (Reconfirmed 2018)
AS/NZS 1050.32:1994 Methods for the analysis of iron and steel Determination of carbon content - Infrared method (Reconfirmed 2017)
AS/NZS 1050.18:1994 Methods for the analysis of iron and steel Determination of phosphorus - Spectrophotometric method (Reconfirmed 2016)
AS/NZS 1554.4:2014 Structural steel welding Welding of high strength quenched and tempered steels
AS/NZS 1554.3:2014 Structural steel welding Welding of reinforcing steel
AS/NZS 1050.31:1994 Methods for the analysis of iron and steel Determination of niobium content - PAR spectrophotometric method (Reconfirmed 2016)
AS/NZS 1050.21:1994 Methods for the analysis of iron and steel Determination of cobalt content - Spectrophotometric method (Reconfirmed 2016)
AS/NZS 1554.5:2014 Structural steel welding Welding of steel structures subject to high levels of fatigue loading
AS 1816.1-2007 Metallic materials - Brinell hardness test Test method (ISO 6506-1:2005, MOD) (Reconfirmed 2017)
AS/NZS 1050.39:1994 Methods for the analysis of iron and steel Determination of chromium content - Flame atomic absorption spectrometric method (Reconfirmed 2016)
AS 1171-1998 Non-destructive testing - Magnetic particle testing of ferromagnetic products, components and structures (Reconfirmed 2022)
AS 1012.14-1991 Methods of testing concrete Method for securing and testing cores from hardened concrete for compressive strength
AS/NZS 1050.27:1994 Methods for the analysis of iron and steel Determination of titanium content - Spectrophotometric method (Reconfirmed 2016)
AS 3894.9-2003 Site testing of protective coatings Determination of adhesion
AS/NZS 1050.26:1994 Methods for the analysis of iron and steel Silicon in iron and steel - Spectrophotometric method (Reconfirmed 2016)
AS/NZS 5100.6:2017 Bridge design Steel and composite construction
AS/NZS 3678:2016 Structural steel - Hot-rolled plates, floorplates and slabs
HB 305-2008 Design handbook for RC structures retrofitted with FRP and metal plates: beams and slabs
AS 2177-2006 Non-destructive testing - Radiography of welded butt joints in metal
AS 1012.24:2015 Methods of testing concrete Determination of the tensile bond strength of concrete - Repairs and strengthening systems
AS 2350.13-2006 Methods of testing portland, blended and masonry cements Determination of drying shrinkage of cement mortars
AS 1627.4-2005 Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017)
AS/NZS 1050.20:1994 Methods for the analysis of iron and steel Determination of magnesium content - Flame atomic absorption spectrometric method (Reconfirmed 2016)
AS 1817.1-2003 Metallic materials - Vickers hardness test Test method (ISO 6507-1:1997, MOD)
AS 1012.21-1999 Methods of testing concrete Determination of water absorption and apparent volume of permeable voids in hardened concrete (Reconfirmed 2014)
HB 84-2006 Guide to Concrete Repair and Protection
AS/NZS 1050.1:1996 Methods for the analysis of iron and steel Sampling iron and steel for chemical analysis
AS/NZS 1050.16:1994 Methods for the analysis of iron and steel Determination of sulfur content - Infrared absorption method after combustion in an induction furnace (Reconfirmed 2017)
AS 2832.2-2003 Cathodic protection of metals Compact buried structures
AS/NZS 1050.14:1994 Methods for the analysis of iron and steel Determination of manganese in iron and steel - Titrimetric method

AS 5100.9:2017 Bridge design Timber
AS 5100.7:2017 Bridge design Bridge assessment
AS 3700:2018 Masonry Structures
AS 5100.1:2017 Bridge design Scope and general principles
AS 1012.14:2018 Methods of testing concrete Method for securing and testing cores from hardened concrete for compressive strength and mass per unit volume

View more information
US$174.31
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.