• There are no items in your cart

ASTM E 1777 : 2009 : R2015

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Guide for Prioritization of Data Needs for Pavement Management

Available format(s)

Hardcopy , PDF

Superseded date

05-08-2024

Language(s)

English

Published date

05-01-2015

CONTAINED IN VOL. 04.03, 2015 Specifies data needs for pavement management systems.

1.1This guide identifies data needs for pavement management systems. It also addresses the relative importance of various types of pavement data.

1.2This guide was developed for use by federal, state, and local agencies, as well as consultants who provide services to those agencies.

1.3This guide describes a process and provides a set of recommendations that any agency may use to develop a plan for acquiring pavement management data. Any individual agency may justifiably assign higher or lower priority to specified data items depending on their needs and policy.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
E 17
DocumentType
Guide
Pages
10
ProductNote
Reconfirmed 2015
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM E 1605 : 2018 : REV B Standard Terminology Relating to Lead in Buildings

ASTM D 4602 : 1993 : R2015 Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment
ASTM E 1337 : 1990 : R2018 Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire
ASTM D 4694 : 2009 Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device
ASTM E 1166 : 2000 : R2009 Standard Guide for Network Level Pavement Management
ASTM D 6433 : 2011 Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys
ASTM E 1215 : 1993 : R2012 Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness
ASTM D 6433 : 2016 Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys
ASTM D 5340 : 1998 Standard Test Method for Airport Pavement Condition Index Surveys
ASTM E 1926 : 2008 : R2015 Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements
ASTM E 1215 : 1993 : R1998 Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness
ASTM E 1337 : 1990 : R1996 Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using a Standard Reference Test Tire
ASTM D 6433 : 2003 Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys
ASTM D 5340 : 2009 Standard Test Method for Airport Pavement Condition Index Surveys
ASTM E 1215 : 1993 : R2007 Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness
ASTM D 4602 : 1993 : R2002 Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment
FAA AC 150/5320-6 : 0 AIRPORT PAVEMENT DESIGN AND EVALUATION
ASTM E 1274 : 2003 : R2008 Standard Test Method for Measuring Pavement Roughness Using a Profilograph
ASTM D 4748 : 1998 Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar
ASTM E 1166 : 2000 : R2015 Standard Guide for Network Level Pavement Management
ASTM D 5340 : 2003 Standard Test Method for Airport Pavement Condition Index Surveys
ASTM E 445/E445M : 2015 : REDLINE Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped With Full-Scale Tires
ASTM D 6433 : 2018 Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys
ASTM D 4694 : 2009 : R2015 Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device
ASTM E 1274 : 2003 Standard Test Method for Measuring Pavement Roughness Using a Profilograph
ASTM D 5340 : 2009 : REV A Standard Test Method for Airport Pavement Condition Index Surveys
ASTM D 4695 : 2003 : R2015 Standard Guide for General Pavement Deflection Measurements
ASTM D 3319 : 2011 : R2017 Standard Practice for the Accelerated Polishing of Aggregates Using the British Wheel
ASTM E 1274 : 2018 Standard Test Method for Measuring Pavement Roughness Using a Profilograph
ASTM E 950 : 1998 Standard Test Method for Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer Established Inertial Profiling Reference
ASTM E 1926 : 2008 Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements
ASTM E 1911 : 2009 : REV A Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester
ASTM E 1215 : 1993 : R2003 Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness
ASTM E 1170 : 1997 : R2001 Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces
ASTM E 1337 : 1990 : R2008 Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire
ASTM D 3319 : 2000 Standard Practice for Accelerated Polishing of Aggregates Using the British Wheel
ASTM E 1170 : 1997 : R2006 Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces
ASTM D 4748 : 2010 Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar
ASTM E 1082 : 1990 : R2002 Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM D 5340 : 2012 Standard Test Method for Airport Pavement Condition Index Surveys
ASTM E 1170 : 1997 : R2017 Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces
ASTM E 1082 : 1990 : R2007 Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM D 4695 : 2003 Standard Guide for General Pavement Deflection Measurements
ASTM E 1170 : 1997 Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces
ASTM D 4748 : 2010 : R2015 Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar
ASTM E 1274 : 1988 : R1993 : EDT 1 Standard Test Method for Measuring Pavement Roughness Using a Profilograph (Withdrawn 2002)
AASHTO GDPS 4 : 0 GUIDE FOR DESIGN OF PAVEMENT STRUCTURES
ASTM D 4123 : 1982 : R1995 Standard Test Method for Indirect Tension Test for Resilient Modulus of Bituminous Mixtures (Withdrawn 2003)
ASTM E 965 : 2015 Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique
ASTM E 1926 : 1998 Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements
ASTM D 5340 : 2012 : R2018 Standard Test Method for Airport Pavement Condition Index Surveys
ASTM E 1166 : 2000 : R2005 Standard Guide for Network Level Pavement Management
ASTM D 4694 : 1996 Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device
ASTM D 4748 : 2006 Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar
ASTM D 4694 : 1996 : R2003 Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device
ASTM E 1911 : 1998 Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester
ASTM E 1911 : 2009 : REV A : EDT 1 Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester (Withdrawn 2018)
ASTM D 5340 : 2004 Standard Test Method for Airport Pavement Condition Index Surveys
ASTM E 1337 : 1990 : R2002 Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using a Standard Reference Test Tire
ASTM E 1166 : 20001 Standard Guide for Network Level Pavement Management
ASTM E 1082 : 1990 : R1995 Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM D 6433 : 2007 Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys
ASTM D 3319 : 2006 Standard Practice for Accelerated Polishing of Aggregates Using the British Wheel
ASTM D 6433 : 1999 Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys
ASTM E 1215 : 1993 : R2017 Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness
ASTM E 1274 : 2003 : R2012 Standard Test Method for Measuring Pavement Roughness Using a Profilograph
ASTM D 4695 : 2003 : R2008 Standard Guide for General Pavement Deflection Measurements
ASTM E 1911 : 2019 Standard Test Method for Measuring Surface Frictional Properties Using the Dynamic Friction Tester
ASTM D 4602 : 1993 : EDT 1 Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment
ASTM D 4602 : 1993 : R2008 Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment
ASTM E 1170 : 1997 : R2007 Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces
ASTM E 1274 : 2003 : R2017 Standard Test Method for Measuring Pavement Roughness Using a Profilograph
ASTM E 1082 : 1990 : R2012 Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM D 4695 : 1996 Standard Guide for General Pavement Deflection Measurements
ASTM D 5340 : 2011 Standard Test Method for Airport Pavement Condition Index Surveys
ASTM D 5340 : 2010 Standard Test Method for Airport Pavement Condition Index Surveys
ASTM E 1911 : 2007 Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester
ASTM E 770 : 1980 : R1985 : EDT 1 Method for Classifying Pavement Surface Textures
ASTM D 6433 : 2009 Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys
ASTM E 1170 : 1997 : R2012 Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces
ASTM E 1082 : 1990 : R2017 Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM E 1337 : 1990 : R2012 Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire
ASTM D 3319 : 2011 Standard Practice for Accelerated Polishing of Aggregates Using the British Wheel
ASTM E 274 : 2006 Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire

View more information
US$75.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.