• There are no items in your cart

ASTM E 8/E8M : 2016-09

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS
Superseded date

01-30-2020

Published date

09-01-2016

CONTAINED IN VOL. 03.01, 2016 Describes the tension testing of metallic materials in any form at room temperature, specifically, the methods of determination of yield strength, yield point elongation, tensile strength, elongation, and reduction of area.

Committee
E 28
DevelopmentNote
Supersedes ASTM E 8 and ASTM E 8M. (03/2008)
DocumentType
Redline
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

SAE AMS 4901 : 2015 TITANIUM SHEET, STRIP, AND PLATE, COMMERCIALLY PURE, ANNEALED, 70.0 KSI (485 MPA)
SAE AMS 2774 : 2016 HEAT TREATMENT, WROUGHT NICKEL ALLOY AND COBALT ALLOY PARTS
ASTM A 447/A447M : 2011 Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
SAE AMS 5349 : 2013 STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 13CR, FREE MACHINING; HARDENED AND TEMPERED
MIL-DTL-83140 Revision B:2014 WIRE ROPE: STAINLESS STEEL, PREFORMED, ROTATION RESISTANT, FOR AIRCRAFT RESCUE HOIST, UTILITY HOIST AND WINCHING
ASTM B 453/B453M : 2011 : EDT 1 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
SAE AMS 4863 : 2015 COPPER-NICKEL-TIN ALLOY CASTINGS, CU - 15NI - 8SN, HOT ISOSTATICALLY PRESSED, SOLUTION ANNEALED AND SPINODAL HEAT TREATED
MIL-DTL-32477 Base Document:2013 Rod and Bar, Cobalt-Nickel-Chromium-Iron-Molybdenum Alloy, for use in Critical Seawater Applications
SAE AMS 6935 : 2015 TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 6.0AL - 6.0V - 2.0SN, SOLUTION HEAT TREATED AND AGED
CSA C68.10 : 2014 SHIELDED POWER CABLE FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS, 5-46 KV
SAE AMS 4916L : 2017 TITANIUM ALLOY SHEET, STRIP, AND PLATE 8AL - 1MO - 1V DUPLEX ANNEALED
SAE AMS 5960 : 2013 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT SHEET, STRIP, AND FOIL, NI - 18CR - 2.8MO - 5.5CB(NB) - 0.70TI - 1.50AL - 10FE - 9CO - 1W, VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED, SOLUTION HEAT TREATED
MIL-DTL-17-133 Revision F:2013 Cables, Radio Frequency, Coaxial, 0.0865 Inch (2.20 mm) Diameter, Semirigid, 50 OHMS
ASTM F 1295 : 2016 : REDLINE Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700)
SAE AMS 4992 : 2014 CASTING, STRUCTURAL INVESTMENT, TITANIUM ALLOY 6AL - 4V HOT ISOSTATICALLY PRESSED
ASTM B 206/B206M : 2012 Standard Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire
SAE AMS 5843 : 2016 COBALT-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS 19CR - 36CO - 25NI - 7.0MO - 0.50CB (NB) - 2.9TI - 0.20AL - 9.0FE VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, WORK STRENGTHENED, AND AGED
SAE AMS 4905 : 2017 TITANIUM ALLOY, DAMAGE-TOLERANT GRADE PLATE, 6AL - 4V, BETA ANNEALED
17/30293011 DC : DRAFT JUL 2017 BS ISO 19881 - GASEOUS HYDROGEN - LAND VEHICLE FUEL CONTAINERS
SAE AMS 5553 : 2018 NICKEL, SHEET AND STRIP, LOW (0.02 MAX) CARBON, ANNEALED
SAE AMS 5536 : 2012 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 47.5NI - 22CR - 1.5CO - 9.0MO - 0.60W - 18.5FE, SOLUTION HEAT TREATED
SAE AMS 7851 : 2017 COLUMBIUM (NIOBIUM) ALLOY FOIL, SHEET, STRIP, AND PLATE, 10W - 2.5ZR, RECRYSTALLIZED
SAE AS 4877 : 2017 BOLTS AND SCREWS, NICKEL ALLOY UNS N07718, CLASSIFICATION: 185 KSI/1200 DEGREES F, PROCUREMENT SPECIFICATION
SAE AMS 6932 : 2015 TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 6.0AL - 4.0V EXTRA LOW INTERSTITIAL, ANNEALED
SAE AMS 4988 : 2014 TITANIUM ALLOY SHEET, STRIP, AND PLATE, 6AL - 6V - 2SN, SOLUTION HEAT TREATED
SAE AMS 7849E : 2015(R2018) TANTALUM SHEET, STRIP, AND PLATE, ANNEALED
MIL-DTL-49514 Revision A:2016 COPPER CRUSHER SPHERES FOR CANNON AND MORTAR PRESSURE GAUGES, GENERAL SPECIFICATION FOR
MIL-DTL-87161 Revision G:2015 WIRE STRAND, NONFLEXIBLE, FOR AIRCRAFT APPLICATION
ASTM B 196/B196M : 2007 Standard Specification for Copper-Beryllium Alloy Rod and Bar
MIL-DTL-60547 Revision G:2008 PROJECTILE, 105 MM, HE, M1 AND M760 - METAL PARTS ASSEMBLY
SAE AMS 6905 : 2014 TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 6.0AL - 2.0SN - 4.0ZR - 2.0MO, DUPLEX ANNEALED
SAE AMS 4910 : 2017 TITANIUM ALLOY, SHEET, STRIP, AND PLATE 5AL - 2.5SN ANNEALED
ASTM F 1044 : 2005 : R2011 : EDT 1 Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings
SAE AMS 5587 : 2016 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SEAMLESS TUBING, 47.5NI - 22CR - 1.5CO - 9.0MO - 0.60W - 18.5FE, SOLUTION HEAT TREATED
ASTM E 2899 : 2015 : REDLINE Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending
API 6DSS : 2017-08 SPECIFICATION FOR SUBSEA PIPELINE VALVES
SAE AMS 5663 : 2016 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AL - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1775 DEGREES F (968 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED
SAE AMS 6527 : 2018 STEEL, BARS AND FORGINGS, 2.0CR - 10NI - 14CO - 1.0MO (0.15 - 0.19C), VACUUM MELTED, NORMALIZED AND OVERAGED
UNE-EN ISO/ASTM 52921:2017 Standard terminology for additive manufacturing - Coordinate systems and test methodologies (ISO/ASTM 52921:2013)
ASTM B 870 : 2008 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and C17510)
ASTM F 2146 : 2013 : REDLINE Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320)
MIL-DTL-8878 Revision L:2014 TURNBUCKLES, POSITIVE SAFETYING, GENERAL SPECIFICATION FOR
ASTM B 944 : 2011 Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510)
SAE AMS 7913 : 2015 ALUMINUM-BERYLLIUM ALLOY, SHEET AND PLATE, 38AL - 62BE
SAE AMS 5704 : 2015 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, FORGINGS 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1825 TO 1900 DEGREES F (996 TO 1038 DEGREES C) SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED
SAE AS 7452 : 2014 BOLTS AND SCREWS, STEEL, LOW ALLOY HEAT TREATED, ROLL THREADED
MIL-DTL-2427 Revision J:2017 Box, Ammunition Packing: Wood, Nailed
ASTM F 3055 : 2014 : EDT 1 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion
SAE AMS 4990 : 2015 TITANIUM ALLOY SHEET, STRIP, AND PLATE, 6AL - 6V - 2SN, SOLUTION HEAT TREATED AND AGED
SAE AMS 4965 : 2014 TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6.0AL 4.0V, SOLUTION HEAT TREATED AND AGED
ASTM B 599 : 1992 : R2009 : EDT 1 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip
SAE AMS 4987 : 2015 TITANIUM ALLOY, FORGINGS, 10V - 2FE - 3AI, CONSUMABLE ELECTRODE MELTED, SINGLE-STEP SOLUTION HEAT TREATED AND OVERAGED, 140 KSI (965 MPA) TENSILE STRENGTH
SAE AMS 4932 : 2015 TITANIUM ALLOY SHEET, 6AL - 4V, DRIVER SHEET
SAE AMS 4943 : 2015 TITANIUM ALLOY, HYDRAULIC, SEAMLESS TUBING, 3.0AL - 2.5V, ANNEALED
SAE AMS 7908 : 2015 BERYLLIUM NEAR-NET PREFORMS, STANDARD GRADE, HOT ISOSTATIC PRESSED
SAE AMS 5583 : 2013 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE, VACUUM MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE TO 170 KSI (1172 MPA) TENSILE STRENGTH
SAE AMS 4595 : 2011(R2018) COPPER NICKEL TIN ALLOY PLATE, 77CU - 15NI - 8SN, SOLUTION ANNEALED AND SPINODAL HARDENED (TX 00)
SAE AMS 4921 : 2016 TITANIUM BARS, WIRE, FORGINGS, AND RINGS COMMERCIALLY PURE, 70 KSI (483 MPA) YIELD STRENGTH
SAE AMS 6910 : 2015 TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 8AL - 1MO - 1V, DUPLEX ANNEALED
SAE AMS 7852 : 2017 COLUMBIUM (NIOBIUM) ALLOY SHEET, STRIP, AND PLATE, 10HF - 1.0TI
NASM 1312-21 : 2004 FASTENER TEST METHODS METHOD 21 SHEAR JOINT FATIGUE, CONSTANT AMPLITUDE
SAE AMS 5350 : 2017 STEEL, CORROSION AND MODERATE HEAT-RESISTANT, INVESTMENT CASTINGS, 12.5CR (410), HARDENED AND TEMPERED
SAE AMS 7910 : 2015 BERYLLIUM NEAR-NET PREFORMS, STANDARD GRADE, COLD ISOSTATIC PRESSED, SINTERED
SAE AMS 6915 : 2015 TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 7.0AL - 4.0MO, ANNEALED
SAE AMS 5842 : 2016 COBALT-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS 19CR - 36CO - 25NI - 7.0MO - 0.50CB (NB) - 2.9TI - 0.20AL - 9.0FE VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED AND WORK STRENGTHENED
SAE AMS 5665 : 2012 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS, 74NI - 15.5CR - 8.0FE
SAE AMS 4907 : 2013 TITANIUM ALLOY, SHEET, STRIP, AND PLATE, 6.0AL - 4.0V, EXTRA LOW INTERSTITIAL, ANNEALED
SAE AMS 5507 : 2012 STEEL, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 17CR - 13NI - 2.5MO (316L), SOLUTION HEAT TREATED
SAE AMS 5834 : 2014 COBALT ALLOY, CORROSION AND HEAT-RESISTANT, ROUND WIRE 20CR - 15NI - 40CO - 7.0MO - 16FE VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, COLD DRAWN, AND AGED
SAE AMS 5402 : 2004 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, INVESTMENT CASTINGS 62NI - 21.5CR - 9.0MO - 3.6CB (NB) AS CAST
SAE AS 7473 : 2018 BOLTS AND SCREWS, ROLL THREADED PROCUREMENT SPECIFICATION FOR
ASTM B 30 : 2016 : REDLINE Standard Specification for Copper Alloys in Ingot Form
ASTM B 986 : 2013 : EDT 1 Standard Test Method for Determination of Tensile Strength by Mass Method for Stranded Conductors Intended for use in Electronic Application
SAE AMS 4975 : 2017 TITANIUM ALLOY, BARS, WIRE, AND RINGS, 6.0AL - 2.0SN - 4.0ZR - 2.0MO - 0.08SI, SOLUTION AND PRECIPITATION HEAT TREATED
SAE AMS 5589 : 2013 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SEAMLESS TUBING 52.5NI - 19CR - 3.0MO - 5.1CB - 0.90TI - 0.50AL - 18FE CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C), SOLUTION HEAT TREATED
SAE AMS 5397 : 2015 ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT-RESISTANT 50NI - 9.5CR - 15CO - 3.0MO - 4.8TI - 5.5AL - 0.015B - 0.95V - 0.06ZR VACUUM MELTED, VACUUM CAST, AS CAST
SAE AMS 6949 : 2016 TITANIUM ALLOY, SHEET AND STRIP, 4AL - 2.5V - 1.5FE, ELECTRON BEAM SINGLE MELTED. ANNEALED
SAE AMS 5706 : 2015 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.006B - 0.05ZR, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1825 TO 1900 DEGREES F SOLUTION HEAT TREATED
CSA C22.2 No. 2556 : 2015 WIRE AND CABLE TEST METHODS
SAE AMS 5888C : 2009(R2015) NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, PLATE, 54NI - 22CR - 12.5CO - 9.0MO - 1.2AL, ANNEALED
SAE AS 7471 : 2018 BOLTS AND SCREWS, NICKEL ALLOY, UNS N07001 TENSILE STRENGTH 165 KSI, CORROSION AND HEAT RESISTANT, PROCUREMENT SPECIFICATION
SAE AMS 5715 : 2014 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 60.5NI - 23CR - 14FE - 1.4AL, ANNEALED
SAE AMS 6946 : 2014 TITANIUM ALLOY, SHEET, STRIP, AND PLATE 4AL - 2.5V - 1.5FE, ANNEALED
SAE AMS 4959 : 2017 TITANIUM ALLOY WIRE 13.5V - 11CR - 3AL SPRING TEMPER
SAE AMS 5390 : 2014 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, INVESTMENT CASTINGS, 47.5NI - 22CR - 1.5CO - 9MO - 0.60W - 18.5FE (N-12MV) AS-CAST
ASTM A 1095 : 2015 Standard Specification for High-Silicon Molybdenum Ferritic Iron Castings
SAE AMS 4903 : 2015 TITANIUM ALLOY SHEET, STRIP, AND PLATE, 6AL - 4V, SOLUTION HEAT TREATED
SAE AMS 7907D : 2015(R2018) BERYLLIUM BARS, RODS, TUBING, AND SHAPES, INSTRUMENT GRADE
ASTM E 2818 : 2011 Standard Practice for Determination of Quasistatic Fracture Toughness of Welds
ASTM F 3213 : 2017 Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion
ASTM B 906 : 2002 : R2012 Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
ASTM B 986 : 2013 Standard Test Method for Determination of Tensile Strength by Mass Method for Stranded Conductors Intended for use in Electronic Application
ASTM B 280 : 2018 : REDLINE Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
ASTM F 1472 : 2014 : REDLINE Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)
ASTM F 3273 : 2017 Standard Specification for Wrought Molybdenum-47.5 Rhenium Alloy for Surgical Implants (UNS R03700)
ASTM F 2660 : 2013 : REDLINE Standard Test Method for Qualifying Coatings for Use on A490 Structural Bolts Relative to Environmental Hydrogen Embrittlement
ASTM B 599 : 1992 : R2014 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip
ASTM B 139/B139M : 2012 Standard Specification for Phosphor Bronze Rod, Bar, and Shapes
ASTM B 138/B138M : 2011 : R2017 Standard Specification for Manganese Bronze Rod, Bar, and Shapes
ASTM F 90 : 2014 : REDLINE Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)
ASTM F 1314 : 2018 : REDLINE Standard Specification for Wrought Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)
ASTM B 599 : 1992 : R2003 : EDT 1 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip
ASTM B 688 : 1996 Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip
ASTM B 43 : 2015 : REDLINE Standard Specification for Seamless Red Brass Pipe, Standard Sizes
ASTM E 1304 : 1997 Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
ASTM B 395/B395M : 2018 : REDLINE Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes
ASTM F 136 : 2013 : REDLINE Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)
ASTM B 829 : 2004 Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
ASTM G 168 : 2017 : REDLINE Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens
ASME A17.1 : 2016 SAFETY CODE FOR ELEVATORS AND ESCALATORS - INCLUDES REQUIREMENTS FOR ELEVATORS, ESCALATORS, DUMBWAITERS, MOVING WALKS, MATERIAL LIFTS, AND DUMBWAITERS WITH AUTOMATIC TRANSFER DEVICES
NBR 16080 : 2013 INTERNAL COMBUSTION ENGINES - CYLINDER LINERS ASSEMBLED IN THE BLOCK WITH OR WITHOUT CONTACT WITH THE COOLANT (WET AND DRY TYPE RESPECTIVELY)
NBR 15628-8 : 2013 IMPLANTS FOR SURGERY - METALLIC COMPONENTS - PART 8: SPECIFICATION FOR METAL INJECTION MOLDED UNALLOYED TITANIUM
SAE AMS 4966 : 2017 TITANIUM ALLOY, FORGINGS, 5AL - 2.5SN, ANNEALED, 110 KSI (758 MPA) YIELD STRENGTH
ISO 8969:2011 Timber structures Testing of punched metal plate fasteners and joints
MIL-DTL-32266 Base Document:2008 WIRE ROPE, 1.5 INCH DIAMETER, GALVANIZED, COMPACTED STRAND, FOR AIRCRAFT ELEVATOR
SAE AMS 5667 : 2015 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE EQUALIZED, PRECIPITATION HARDENABLE
ASTM B 658/B658M : 2011 : EDT 1 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
ASTM B 139/B139M : 2012 : R2017 Standard Specification for Phosphor Bronze Rod, Bar, and Shapes
SAE AMS 4909 : 2016 TITANIUM ALLOY, SHEET, STRIP, AND PLATE 5AL - 2.5SN, EXTRA LOW INTERSTITIAL ANNEALED
ASTM B 805 : 2006 Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire
SAE AMS 4926 : 2015 TITANIUM ALLOY, BARS, WIRE, AND RINGS, 5AL - 2.5SN, ANNEALED, 110 KSI (758 MPA) YIELD STRENGTH
SAE AMS 4951 : 2017 TITANIUM WELDING WIRE COMMERCIALLY PURE ENVIRONMENT CONTROLLED PACKAGING
SAE AMS 4860 : 2015 MANGANESE BRONZE, SAND AND CENTRIFUGAL CASTINGS, 58CU - 39ZN - 1.2FE - 1.0AL - 0.80MN, AS CAST
SAE AMS 7906D : 2015(R2018) BERYLLIUM BARS, RODS, TUBING, AND SHAPES, STANDARD GRADE
ASTM B 688 : 1996 : R2014 Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip
SAE AMS 5711 : 2015 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 65NI - 15.8CR - 15.2MO - 0.30AL - 0.05LA, SOLUTION HEAT TREATED
SAE AMS 6953 : 2018 TITANIUM ALLOY SHEET, 6AL - 4SN - 3NB - 0.5MO - 0.3SI, DUPLEX ANNEALED
SAE AMS 5782 : 2013 STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 20.5CR - 9.0NI - 0.50MO - 1.5W - 1.2CB - 0.20TI, VACUUM INDUCTION MELTED
SAE AMS 5879 : 2015 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND FOIL, 62NI - 21.5CR - 9.0MO - 3.7CB (NB), COLD ROLLED AND ANNEALED
ASTM B21/B 21M : 2014-10 SPECIFICATION FOR NAVAL BRASS ROD, BAR, AND SHAPES
ASTM B 302 : 2017 : REDLINE Standard Specification for Threadless Copper Pipe, Standard Sizes
SAE AMS H 81200 : 2014 HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS
MIL-DTL-13528 Revision C:2009 HYDROCHLORIC ACID, INHIBITED, RUST-REMOVING
SAE AMS 4963 : 2016 TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6.0AL - 4.0V, ANNEALED, HEAT TREATABLE, MODIFIED STRENGTH
SAE AMS 6947 : 2015 TITANIUM ALLOY, BARS, WIRE, FORGINGS, RINGS, AND DRAWN SHAPES, 4AL - 2.5V -1.5 FE ANNEALED, HEAT TREATABLE
ASTM B 981/B981M : 2012 Standard Specification for Low Leaded Brass Rod, Bar and Shapes
ASTM B 684/B684M : 2016 : REDLINE Standard Specification for Platinum-Iridium Electrical Contact Materials
SAE AMS 5442 : 2017 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, NI - 18CR - 2.8MO - 5.5CB(NB) - 0.70TI - 1.50AL - 10FE - 9CO - 1W, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED
ASTM B 706 : 2000 : R2006 Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube
ASTM B 48 : 2000 : R2005 : EDT 1 Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
ASTM B 48 : 2000 : R2011 Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
ASTM B 870 : 2008 : R2014 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and C17510)
AASHTO M 289 : 1991 SPECIFICATION FOR ALUMINUM-ZINC ALLOY COATED SHEET STEEL FOR CORRUGATED STEEL PIPE
SAE AMS 6952 : 2018 TITANIUM ALLOY, FORGINGS, 5.8AL - 4.0SN - 3.5ZR - 2.8MO - 0.7NB - 0.35SI - 0.06C, SOLUTION AND PRECIPITATION HEAT TREATED
ASTM B 453/B453M : 2011 : R2017 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
SAE AMS 4598 : 2012 COPPER NICKEL TIN ALLOY, MECHANICAL TUBE, 77CU - 15NI - 8SN, SOLUTION ANNEALED AND SPINODAL HARDENED (TX 00)
BS EN 61757-1-1:2017 Fibre optic sensors Strain measurement. Strain sensors based on fibre Bragg gratings
ASTM B 1001 : 2017 Standard Specification for Copper Electrode Wire Used for Welding Seams of Steel Cans
ASTM B 768 : 2011 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet
ASTM B 1007 : 2017 Standard Specification for Welded Precipitation Hardenable or Cold Worked, Nickel Alloy Tube
ASTM F 560 : 2017 : REDLINE Standard Specification for Unalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400)
ASTM B 937 : 2018 : REDLINE Standard Specification for Copper-Beryllium Seamless Tube (UNS Nos. C17500 and C17510)
SAE AMS 5396 : 2014 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, INVESTMENT CASTINGS, 65NI - 28MO - 5.5FE - 0.40V (N-12MV), AS-CAST
ASTM B 96/B96M : 2016 : REDLINE Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels
AASHTO T 244 : 2014 METHOD OF TEST FOR MECHANICAL TESTING OF STEEL PRODUCTS
ASTM B 805 : 2006 : R2017 : EDT 1 Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire
ASTM A 1109 : 2018 Standard Specification for Special Fittings for Single-Stack Hubless Cast Iron Soil Pipe Fittings for Sanitary, Waste, and Vent Piping Applications
ASTM B 592 : 2015 : REDLINE Standard Specification for Copper-Zinc-Aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
SAE AMS 5873 : 2014 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 65NI - 15.8CR - 15.2MO - 0.30AI - 0.05LA, CONSUMABLE ELECTRODE REMELTED, SOLUTION HEAT TREATED
NACE TM 01 11 : 2011 SLOW STRAIN RATE TEST METHOD FOR EVALUATION OF ETHANOL STRESS CORROSION CRACKING IN CARBON STEELS
ASTM B 466/B 466M : 2014-05 SPECIFICATION FOR SEAMLESS COPPER-NICKEL PIPE AND TUBE
ASTM B 441 : 2016 : REDLINE Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)
ASTM F 2581 : 2012 Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225)
SAE AMS 4985 : 2014 TITANIUM ALLOY, INVESTMENT CASTINGS 6AL - 4V 130 UTS, 120 YS, 6% EL HOT ISOSTATICALLY PRESSED ANNEAL OPTIONAL OR WHEN SPECIFIED
SAE AMS 4981 : 2017 TITANIUM ALLOY BARS, WIRE, AND FORGINGS, 6.0AL - 2.0SN - 4.0ZR - 6.0MO, SOLUTION AND PRECIPITATION HEAT TREATED
SAE AMS 4634 : 2015 ALUMINUM BRONZE BARS, RODS, AND FORGINGS, 90.5CU - 7.5AL - 1.9SI, STRESS RELIEVED
SAE AMS 4946 : 2016 TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC, 3AL - 2.5V, TEXTURE CONTROLLED, COLD WORKED, STRESS RELIEVED
ASTM B 540 : 1997 : R2012 Standard Specification for Palladium Electrical Contact Alloy
ASTM B 99/B99M : 2015 : REDLINE Standard Specification for Copper-Silicon Alloy Wire for General Applications
ASTM F 2384 : 2010 Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901)
SAE AMS 5354 : 2012 STEEL, CORROSION AND HEAT RESISTANT, INVESTMENT CASTINGS, 13CR - 2.0NI - 3.0W, HARDENED AND TEMPERED TO 32 - 38 HRC
SAE AMS 5532 : 2017 IRON ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 30FE - 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0CB(NB) - 0.15N, SOLUTION HEAT TREATED
ASTM F 3046 : 2013 Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy for Surgical Implant Applications (UNS R56320)
SAE AMS 7725 : 2016 TUNGSTEN HEAVY ALLOY SHAPES, SINTERED, HIGH DENSITY
SAE AMS 4930 : 2015 TITANIUM ALLOY BARS, WIRE, FORGINGS, AND RINGS, 6AL - 4V, EXTRA LOW INTERSTITIAL, ANNEALED
SAE AMS 4616 : 2012 SILICON BRONZE BARS, RODS, FORGINGS, AND TUBING 92CU - 3.2SI - 2.8ZN - 1.5FE STRESS RELIEVED
ANSI HGV 2 : 2014 COMPRESSED HYDROGEN GAS VEHICLE FUEL CONTAINERS
SAE AMS 5841 : 2016 COBALT-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS 19CR - 36CO - 25NI - 7.0MO - 0.50CB (NB) - 2.9TI - 0.20AL - 9.0FE VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED FOR WORK STRENGTHENING
ASTM B 75M : 1999 : R2005 Standard Specification for Seamless Copper Tube [Metric]
SAE AS 7474 : 2018 BOLTS AND SCREWS, STEEL, CORROSION RESISTANT, UNS S17400 TENSILE STRENGTH 140 KSI PROCUREMENT SPECIFICATION
AWS A5.35/A5.35M : 2015 SPECIFICATION FOR COVERED ELECTRODES FOR UNDERWATER WET SHIELDED METAL ARC WELDING
SAE AS 7461 : 2015 BOLTS AND SCREWS, TITANIUM ALLOY, 6AL-4V, UNS R56400, FATIGUE-RATED, PROCUREMENT SPECIFICATION FOR
SAE AS 5958 : 2017 FITTINGS, AXIALLY SWAGED TUBE WITH FLARELESS SEPARABLE, FLUID SYSTEM FOR OPERATING PRESSURES UP TO AND INCLUDING 5080 PSI (35 000 KPA), SPECIFICATION FOR
SAE AMS 4898 : 2014 TITANIUM ALLOY, SHEET, 6AL - 2SN - 2ZR - 2MO - 2CR - 0.15SI, ANNEALED
SAE AMS 4941 G : 2017 TITANIUM TUBING, WELDED, 40 KSI (276 MPA) YIELD STRENGTH
SAE AMS 4534 : 2013 COPPER-BERYLLIUM ALLOY, BARS AND RODS 98CU - 1.9BE SOLUTION HEAT TREATED, COLD WORKED, AND PRECIPITATION HEAT TREATED (TH04, FORMERLY HT)
SAE AMS 5701 : 2015 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 41.5NI - 16CR - 37FE - 2.9CB (NB) - 1.8TI, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED
ASTM B 688 : 1996 : R2004 Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip
ASTM B 16/B16M : 2010 : R2015 Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
I.S. EN ISO/ASTM 52921:2016 STANDARD TERMINOLOGY FOR ADDITIVE MANUFACTURING - COORDINATE SYSTEMS AND TEST METHODOLOGIES (ISO/ASTM 52921:2013)
SAE AMS 4530 : 2011 COPPER-BERYLLIUM ALLOY SHEET, STRIP, AND PLATE, 98CU - 1.9BE, SOLUTION HEAT TREATED (TB00)
SAE AMS 5870 : 2012 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 60.5NI - 23CR - 14FE - 0.35TI - 1.4AL, SOLUTION HEAT TREATED
SAE AMS 4935 : 2017 TITANIUM ALLOY EXTRUSIONS AND FLASH WELDED RINGS, 6AL - 4V, ANNEALED, BETA PROCESSED
ANSI/ASSP Z359.6:2016 SPECIFICATIONS AND DESIGN REQUIREMENTS FOR ACTIVE FALL PROTECTION SYSTEMS
ASTM B 301/B301M : 2013 : REDLINE Standard Specification for Free-Cutting Copper Rod, Bar, Wire, and Shapes
ASTM B 599 : 1992 : R1997 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip
ASTM B 1003 : 2016 Standard Specification for Seamless Copper Tube for Linesets
SAE AMS 5356 : 2016 STEEL, CORROSION RESISTANT, INVESTMENT CASTINGS, 15CR - 4.6NI - 0.22CB - 2.8CU, SOLUTION AND PRECIPITATION HEAT TREATED (H1100), 130 KSI (896 MPA) TENSILE STRENGTH
ASTM B 196/B196M : 2007 : R2013 : EDT 1 Standard Specification for Copper-Beryllium Alloy Rod and Bar
SAE AMS 4911 : 2018 TITANIUM ALLOY, SHEET, STRIP, AND PLATE, 6AL - 4 V, ANNEALED
SAE AMS 5716 : 2016 IRON-NICKEL ALLOY, HEAT RESISTANT, BARS, WIRE, FORGINGS, AND RINGS, 44FE - 18.5CR - 35.5NI - 1.1SI, SOLUTION HEAT TREATED
SAE AMS 7857 : 2017 COLUMBIUM (NIOBIUM) ALLOY BARS, RODS, AND EXTRUSIONS, 10HF - 1.0TI, RECRYSTALLIZATION ANNEALED
ASTM B 176 : 2018 : REDLINE Standard Specification for Copper-Alloy Die Castings
ASTM B 706 : 2000 : R2011 Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube
ASTM B 453/B453M : 2011 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
ASTM F 3056 : 2014 : EDT 1 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion
ASTM E 1304 : 1997 : R2008 : EDT 1 Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
SAE AMS 2759 : 2014 HEAT TREATMENT OF STEEL PARTS, GENERAL REQUIREMENTS
ASTM B 944 : 2011 : R2016 Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510)
ASTM B 743 : 2012 : REDLINE Standard Specification for Seamless Copper Tube in Coils
ASTM B 206/B206M : 2012 : R2017 Standard Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire
SAE AS 7458 : 2016 STUDS, STEEL, LOW ALLOY, HEAT RESISTANT NORMALIZED AND TEMPERED, ROLL THREADED 135000 PSI TENSILE STRENGTH
ASTM E 1304 : 1997 : R2002 Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
ASTM E 531 : 2013 : REDLINE Standard Practice for Surveillance Testing of High-Temperature Nuclear Component Materials (Withdrawn 2022)
ASTM B 540 : 1997 : R2017 Standard Specification for Palladium Electrical Contact Alloy
ASTM B 974/B974M : 2016 : REDLINE Standard Specification for Free-Cutting Bismuth Brass Rod, Bar and Wire
ASTM F 3055 : 2014 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion
ASTM B 805 : 2006 : R2011 Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire
ASTM B 1005 : 2017 Standard Specification for Copper-Clad Aluminum Bar for Electrical Purposes (Bus Bar)
ASTM B 929 : 2017 : REDLINE Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar
ASTM E 1681 : 2003 : R2013 Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
ASTM B 988 : 2013 Standard Specification for Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components
ASTM B 658/B658M : 2011 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
ASTM F 2989 : 2013 : REDLINE Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications
ASME PV CODE 1 : 2017 BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF POWER BOILERS
ASME PV CODE 4 : 2017 BPVC Section IV-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF HEATING BOILERS
SAE AMS 4940 : 2017 TITANIUM SHEET, STRIP, AND PLATE COMMERCIALLY PURE ANNEALED, 25.0 KSI (172 MPA) YIELD STRENGTH
SAE AMS 6930 : 2014 TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 6.0AL - 4.0V, SOLUTION HEAT TREATED AND AGED
ASTM F 3302 : 2018 Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion
MIL-STD-3049 Base Document:2013 MATERIALS DEPOSITION, DDM: DIRECT DEPOSITION OF METAL FOR REMANUFACTURE, RESTORATION AND RECOATING
SAE AMS 5702 : 2018 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 41.5NI - 16CR - 37FE - 2.9CB (NB) - 1.8TI, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1750 DEGREES F (954 DEGREES C) SOLUTION HEAT TREATED
SAE AMS 5441 : 2016 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, NI - 18CR - 2.8MO - 5.5CB(NB) - 0.70TI - 1.50AL - 10FE - 9CO - 1W, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE
ASTM A 608/A608M : 2014 Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
MIL-DTL-32528 Base Document:2015 Rod, Bar, and Billet, Titanium Alloy TI-5111 for Use in Critical Seawater Application
ASTM B 927/B927M : 2017 : REDLINE Standard Specification for Brass Rod, Bar, and Shapes
ASTM B 824 : 2017 : REDLINE Standard Specification for General Requirements for Copper Alloy Castings
SAE AMS 6901 : 2015 TITANIUM ALLOY BARS, FORGINGS, AND FORGING STOCK 5AL - 2.5SN, EXTRA LOW INTERSTITIAL ANNEALED
SAE AMS 4928W : 2017 TITANIUM ALLOY BARS, WIRE, FORGINGS, RINGS, AND DRAWN SHAPES, 6AL - 4V, ANNEALED
MIL-DTL-3241 Revision F:2010 REELS, CABLE (REELS DR-5(), DR-7(), DR-B(), RC-453()/G, RL-159()/U)
ASTM B 48:2000 Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
SAE AMS 6900 : 2015 TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 5AL - 2.5SN, ANNEALED
SAE AMS 4939C : 2017 TITANIUM ALLOY SHEET, STRIP, AND PLATE, 3AL - 8V - 6CR - 4MO - 4ZR, SOLUTION HEAT TREATED
BS ISO/ASTM 52921 : 2013 STANDARD TERMINOLOGY FOR ADDITIVE MANUFACTURING - COORDINATE SYSTEMS AND TEST METHODOLOGIES
ANSI/CSA CHMC 1-2014 (R2018) Test methods for evaluating material compatibility in compressed hydrogen applications - Metals
ASTM E 1856 : 2013 : REDLINE Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines
ASTM E 2218 : 2015 : REDLINE Standard Test Method for Determining Forming Limit Curves
SAE AMS 5916 : 2017 ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 35FE - 24CR - 37NI - 0.65CB(NB) - 0.2N, ANNEALED
ASTM B 709 : 2017 : REDLINE Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028) Plate, Sheet, and Strip
SAE AMS 5889 : 2015 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET AND STRIP, 54NI - 22CR - 12.5CO - 9.0MO - 1.2AL, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, ANNEALED
SAE AMS 5225 : 2014 IRON-NICKEL ALLOY, STRIP, 49FE - 5.3CR - 42NI - 2.5TI - 0.55AL, SOLUTION HEAT TREATED, COLD ROLLED, 50% REDUCTION
SAE AMS 4922 : 2014 TITANIUM ALLOY, SEAMLESS, HYDRAULIC TUBING 15V - 3.0CR - 3.0AL - 3.0SN COLD WORKED AND PRECIPITATION HEAT TREATED
API SPEC 17E : 2017 SPECIFICATION FOR SUBSEA UMBILICALS
ASTM B 248 : 2017 : REDLINE Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
ASTM A 878/A878M : 2017-09 SPECIFICATION FOR STEEL WIRE, MODIFIED CHROMIUM VANADIUM VALVE SPRING QUALITY
SAE AMS 6945 : 2014 TITANIUM ALLOY, SINGLE MELT, SHEET, STRIP, AND PLATE 6AL - 4V ANNEALED
SAE AS 7479 : 2013 BOLTS AND SCREWS, STEEL, UNS S66286, 1650 DEGREES F SOLUTION HEAT TREATED, PRECIPITATION HEAT TREATED BEFORE ROLL THREADED
SAE AMS 4937 : 2014 TITANIUM ALLOY, EXTRUSIONS AND FLASH WELDED RINGS, 6AL - 6V - 2SN, BETA EXTRUDED PLUS ANNEALED, HEAT TREATABLE
ASTM E 517 : 2018 : REDLINE Standard Test Method for Plastic Strain Ratio <emph type="bdit">r</emph> for Sheet Metal
SAE AMS 4978 : 2018 TITANIUM ALLOY BARS, WIRE, FORGINGS, AND RINGS, 6AL - 6V - 2SN, ANNEALED
SAE AMS 4919 : 2014 TITANIUM ALLOY SHEET, STRIP, AND PLATE 6AL - 2SN - 4ZR - 2MO - 0.08SI DUPLEX ANNEALED
ASTM F 2384 : 2010 : R2016 Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901)
ASTM B 505/B505M : 2018 : REDLINE Standard Specification for Copper Alloy Continuous Castings
SAE AMS 4544 H: 2017 NICKEL-COPPER ALLOY, CORROSION RESISTANT, SHEET, STRIP, AND PLATE 67NI - 30CU, ANNEALED
Z259.2.5-17 Fall arresters and vertical lifelines
ASTM B 352/B352M : 2017 : REDLINE Standard Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application
SAE AMS 4510 : 2015 PHOSPHOR BRONZE, SHEET, STRIP, AND PLATE, 94.5CU - 4.0SN - 0.19P, SPRING TEMPER (H08)
SAE AMS 4612 : 2017 BRASS, NAVAL, BARS AND RODS 60.5CU - 38.5ZN - 0.75SN HARD TEMPER (H04)
SAE AMS 4871 : 2010(S2015) ALUMINUM BRONZE, CENTRIFUGAL AND CHILL CASTINGS, 85CU - 11AL - 3.6FE, SOLUTION HEAT TREATED AND TEMPERED
QQ-B-639 Revision C:2016 BRASS, NAVAL: FLAT PRODUCTS
ASTM B 506 : 2016 : REDLINE Standard Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction
ASTM B 570 : 2016 : REDLINE Standard Specification for Copper-Beryllium Alloy (UNS Nos. C17000 and C17200) Forgings and Extrusions
SAE AMS 4625 : 2016 PHOSPHOR BRONZE BARS, RODS, AND TUBING, 95CU - 5SN, HARD TEMPER
SAE AMS 5845 : 2014 ALLOY, CORROSION-RESISTANT, ROUND BARS 20CR - 35NI - 35CO - 10MO VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE VACUUM REMELTED SOLUTION HEAT TREATED, WORK STRENGTHENED, AND AGED
CSA B137 COMPENDIUM : 2017 THERMOPLASTIC PRESSURE PIPING COMPENDIUM
MIL-DTL-18375H: 2005 WIRE ROPE, FLEXIBLE, CORROSION-RESISTING, NONMAGNETIC, FOR AIRCRAFT CONTROL
CSA B355 : 2015 LIFTS FOR PERSONS WITH PHYSICAL DISABILITIES
SAE AMS 4944 : 2015 TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC 3.0AL - 2.5V COLD WORKED, STRESS RELIEVED
SAE AMS 4976 : 2017 TITANIUM ALLOY, FORGINGS, 6.0AL - 2.0SN - 4.0ZR - 2.0MO - 08SI, SOLUTION AND PRECIPITATION HEAT TREATED
SAE AMS 5713K : 2016 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 53NI - 19CR - 11CO - 9.8MO - 3.2TI - 1.6AL - 0.006B, VACUUM MELTED, SOLUTION AND PRECIPITATION HEAT TREATED
SAE AMS 6463 : 2013 WIRE, STEEL WELDING, 18.5NI - 8.5CO - 5.2MO - 0.72TI - 0.10AL, (MARAGE 300), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING
SAE AMS 5772 E: 2016 COBALT ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 40CO - 22CR - 22NI - 14.5W - 0.07LA, SOLUTION HEAT TREATED
SAE AMS4958E : 2017 TITANIUM ALLOY BARS AND RODS, 3AL - 8V - 6CR - 4MO - 4ZR, CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED AND CENTERLESS GROUND OR PEELED AND POLISHED
SAE AMS 4590 : 2015 EXTRUSIONS, NICKEL-ALUMINUM BRONZE, MARTENSITIC, 78.5CU - 10.5AL - 5.1NI - 4.8FE, QUENCHED AND TEMPERED (TQ50)
SAE AMS 7855 : 2017 COLUMBIUM (NIOBIUM) ALLOY BARS, RODS, AND WIRE, 10W - 2.5ZR, RECRYSTALLIZED
SAE AMS 4917 : 2017 TITANIUM ALLOY SHEET, STRIP, AND PLATE 13.5V - 11CR - 3.0AL - SOLUTION HEAT TREATED
SAE AMS 5854 : 2015 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, AND RINGS, 61NI - 20.5CR - 8.5MO - 3.4CB(NB) - 1.3TI - 5.0FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED SOLUTION HEAT TREATED
SAE MA 3375 : 2011 STUDS, CORROSION AND HEAT RESISTANT STEEL, UNS S66286 TENSILE STRENGTH 900 MPA, PROCUREMENT SPECIFICATION, METRIC, FSC 5307
SAE AMS 7490 : 2014 RINGS, FLASH WELDED, CORROSION AND HEAT-RESISTANT AUSTENITIC STEELS, AUSTENITIC-TYPE IRON, NICKEL, OR COBALT ALLOYS, OR PRECIPITATION-HARDENABLE ALLOYS
ASTM F 2581 : 2012 : R2017 Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225)
SAE AMS 4986 : 2015 TITANIUM ALLOY, FORGINGS, 10V - 2FE - 3AL, CONSUMABLE ELECTRODE MELTED, SINGLE-STEP SOLUTION HEAT TREATED AND OVERAGED, 160 KSI (1103 MPA) TENSILE STRENGTH
ASTM F 139 : 2012 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673)
SAE AMS 5637 : 2012 STEEL, CORROSION RESISTANT, BARS AND WIRE 18CR - 9.0NI (SAE 30302) SOLUTION HEAT TREATED, COLD DRAWN AND STRESS RELIEVED 125 KSI (862 MPA) TENSILE STRENGTH
API 17E REDLINE : 2010 SPECIFICATION FOR SUBSEA UMBILICALS
SAE AMS 4972 : 2015 TITANIUM ALLOY BARS, WIRE, AND RINGS, 8AL - 1MO - 1V, SOLUTION HEAT TREATED AND STABILIZED
SAE AMS 2759/4 : 2008 HEAT TREATMENT, AUSTENITIC CORROSION-RESISTANT STEEL PARTS
SAE AMS 5555 : 2013 NICKEL WIRE AND RIBBON 99NI
SAE AMS 6931 : 2017 TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 6.0AL - 4.0V, ANNEALED
SAE AMS 5541 : 2013 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET AND STRIP 73NI - 15.5CR - 2.4TI - 0.7AL - 7.0FE ANNEALED
SAE AMS 5844 : 2014 ALLOY, CORROSION-RESISTANT, ROUND BARS, 20CR - 35NI - 35CO - 10MO, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE VACUUM REMELTED, SOLUTION HEAT TREATED AND WORK STRENGTHENED
ASTM E 2714 : 2013 : REDLINE Standard Test Method for Creep-Fatigue Testing
SAE AMS 4942 : 2018 TITANIUM TUBING, SEAMLESS, ANNEALED, 40.0 KSI (275 MPA) YIELD STRENGTH
SAE AMS 5890 : 2015 NICKEL, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND EXTRUSIONS, THORIA DISPERSION STRENGTHENED, 2.2THO[2], STRESS-RELIEVED
B339-14 Cylinders, spheres, and tubes for the transportation of dangerous goods
SAE AMS 4553D : 2017 BRASS, SEAMLESS, TUBING 85CU - 15ZN ANNEALED (O61)
SAE AMS 6920 : 2015 TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 3AL - 8V - 6CR - 4MO - 4ZR, SOLUTION HEAT TREATED
SAE AMS 5410 : 2017 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, INVESTMENT CASTINGS, 61NI - 16CR - 8.5CO - 1.8MO - 2.6W - 0.85CB (NB) - 3.4TI - 1.8TA - 3.4AL - 0.010B - 0.05ZR, VACUUM MELTED, VACUUM CAST AS CAST, OR SOLUTION TREATED, OR SOLUTION AND PRECIPITATION HARDENED
SAE AMS4845J : 2015 TIN BRONZE CASTINGS, SAND AND CENTRIFUGAL, 87.5CU - 10SN - 2ZN, AS CAST
SAE AMS 5585 : 2016 ALLOY, CORROSION AND HEAT RESISTANT, WELDED TUBING, 32FE - 21CR - 20NI - 20CO - 3MO - 2.5W - 1.0CB (NB) - 0.15N, SOLUTION HEAT TREATED
SAE AMS 4993F : 2017 TITANIUM ALLOY, BLENDED POWDER COMPACTS, SINTERED, 6AL - 4V
SAE AMS 4934 : 2015 TITANIUM ALLOY, EXTRUSIONS AND FLASH WELDED RINGS, 6AL - 4V, SOLUTION HEAT TREATED AND AGED
ANSI/ASSE Z359.13 : 2013 PERSONAL ENERGY ABSORBERS AND ENERGY ABSORBING LANYARDS
SAE AMS 4900 : 2014 TITANIUM SHEET, STRIP, AND PLATE, COMMERCIALLY PURE, ANNEALED, 55.0 KSI (379 MPA) YIELD STRENGTH
ASTM B 140/B140M : 2012 Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes
SAE AMS 5878 : 2015 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 59NI - 22CR - 2MO - 14W - 0.35AI - 0.03LA, SOLUTION HEAT TREATED
ASTM F 1044 : 2005 : R2017 : EDT 1 Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings
ASTM B 643 : 2018 : REDLINE Standard Specification for Copper-Beryllium Alloy Seamless Tube
SAE AMS 7911 : 2015 ALUMINUM BERYLLIUM, PREFORMS HOT ISOSTATIC PRESSED AND HEAT TREATED 38AL - 62BE
IEC 61757-1-1:2016 Fibre optic sensors - Part 1-1: Strain measurement - Strain sensors based on fibre Bragg gratings
ASTM B 121/B121M : 2016 : REDLINE Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar
SAE AMS 4555 : 2015 LEADED BRASS, SEAMLESS TUBING, 66.5CU - 32.5ZN - 0.48PB, LIGHT ANNEALED (O50)
ICEA S 89 648 : 2011 AERIAL SERVICE WIRE TECHNICAL REQUIREMENTS
ASTM B 540 : 1997 : R2008 Standard Specification for Palladium Electrical Contact Alloy
ASTM B 75M : 1999 Standard Specification for Seamless Copper Tube [Metric]
ASTM B 906 : 2002 : R2017 Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
ASTM B 768 : 2011 : R2016 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet
ASTM F 1813 : 2013 : REDLINE Standard Specification for Wrought Titanium<span class='unicode'>–</span>12 Molybdenum<span class='unicode'>–</span>6 Zirconium<span class='unicode'>–</span>2 Iron Alloy for Surgical Implant (UNS R58120)
ASTM E 740/E740M : 2003 : R2010 : EDT 2 Standard Practice for Fracture Testing with Surface-Crack Tension Specimens
ASTM E 1304 : 1997 : R2008 Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
ASTM B 640 : 2012 : REV A : REDLINE Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service
ASTM B 906 :2002 Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
ASTM B 906 : 2002 : R2006 Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
ASTM B 540 : 1997 : R2008 : EDT 1 Standard Specification for Palladium Electrical Contact Alloy
ASTM B 196/B196M : 2007 : R2013 Standard Specification for Copper-Beryllium Alloy Rod and Bar
ASTM F 2257 : 2014 : REDLINE Standard Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673)
ASTM B 591 : 2015 : REDLINE Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar
ASTM A 447/A447M : 2011 : R2016 Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
ASTM F 1624 : 2012-11 TEST METHOD FOR MEASUREMENT OF HYDROGEN EMBRITTLEMENT THRESHOLD IN STEEL BY THE INCREMENTAL STEP LOADING TECHNIQUE
NASA MSFC SPEC 3679 : 2012 PROCESS SPECIFICATION - WELDING AEROSPACE HARDWARE
EN 61757-1-1:2017 Fibre optic sensors – Part 1-1: Strain measurement – Strain sensors based on fibre Bragg gratings
SAE AMS 7910D:2015(R2018) BERYLLIUM NEAR-NET PREFORMS, STANDARD GRADE, COLD ISOSTATIC PRESSED, SINTERED
NASA STD 5006 : 2015 GENERAL FUSION WELDING REQUIREMENTS FOR AEROSPACE MATERIALS
NASA MSFC STD 3716 : 2017 STANDARD FOR ADDITIVELY MANUFACTURED SPACEFLIGHT HARDWARE BY LASER POWDER BED FUSION IN METALS
SAE AMS 4971L : 2017 TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6AL - 6V - 2SN, ANNEALED, HEAT TREATABLE
SAE AMS 4973 : 2016 TITANIUM ALLOY FORGINGS, 8AL - 1MO - 1V, SOLUTION HEAT TREATED AND STABILIZED
ASTM B 465 : 2016 : REDLINE Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
ASTM B 159/B159M : 2017 : REDLINE Standard Specification for Phosphor Bronze Wire
ASTM F 2885 : 2017 : REDLINE Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications
ASTM B 829 : 2004 : REV A : R2009 Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
SAE AMS 4979J : 2017 TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6AL - 6V - 2SN, SOLUTION AND PRECIPITATION HEAT TREATED
ASTM F 2921 : 2013 TERMINOLOGY FOR ADDITIVE MANUFACTURING - COORDINATE SYSTEMS AND TEST METHODOLOGIES
ASTM F 1044 : 2005 Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings
SAE AMS 5887 : 2015 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 54NI - 22CR - 12.5CO - 9.0MO - 1.2AL, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, ANNEALED
AASHTO M 181 : 2010 : R2015 SPECIFICATION FOR CHAIN-LINK FENCE
ASTM B 551/B551M : 2012 : R2017 Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate
I.S. EN ISO 13628-5:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 5: SUBSEA UMBILICALS
ASTM B 48 : 2000 : R2016 Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
SCTE 74 : 2011 SPECIFICATION FOR BRAIDED 75 OHM FLEXIBLE RF COAXIAL DROP CABLE
SAE AMS 4970 : 2016 TITANIUM ALLOY BARS, WIRE, AND FORGINGS 7AL - 4MO SOLUTION AND PRECIPITATION HEAT TREATED
SAE AMS 6950 : 2017 TITANIUM ALLOY BARS, FORGINGS, AND FORGING STOCK 4AL - 2.5V - 1.5 FE SINGLE HEARTH MELTED, ANNEALED
SAE AMS 5544 : 2014 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 57NI - 19.5CR - 13.5CO - 4.2MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, ANNEALED
ASTM B 22/B22M : 2017 : REDLINE Standard Specification for Bronze Castings for Bridges and Turntables
SAE AMS 5596 : 2017 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, FOIL AND PLATE, 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C) SOLUTION HEAT TREATED
SAE AMS 5597 : 2016 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1950 DEGREES F (1066 DEGREES C) SOLUTION HEAT TREATED
ASTM E 345 : 2016 : REDLINE Standard Test Methods of Tension Testing of Metallic Foil
SAE AS 7455 : 2016 BOLTS AND SCREWS, STEEL, LOW ALLOY, HEAT RESISTANT HARDENED AND TEMPERED, ROLL THREADED
SAE AMS 4633 : 2018 BRONZE, ALUMINUM SILICON, RODS, BARS, AND FORGINGS 90CU - 7.0AL - 1.8SI DRAWN AND STRESS RELIEVED (HR50)
SAE AMS 5915 : 2014 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 57NI - 20CR - 10CO - 8.5MO - 2.1TI - 1.5AL - 0.005B, VACUUM INDUCTION AND CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HEAT TREATABLE
MIL-DTL-17902 Revision G:2013 HOSE, END FITTINGS AND HOSE ASSEMBLIES, SYNTHETIC RUBBER, AIRCRAFT FUELS
SAE AMS 6951 : 2017 TITANIUM ALLOY, SHEET 5AL - 4V - 0.75MO - 0.5FE ANNEALED
SAE AMS 5940 : 2014 ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 34CO - 3.0CR - 28NI - 3.0CB(NB) - 5.5AL - 0.008B - 25.5FE MULTIPLE MELTED, HIGH TEMPERATURE, OXIDATION-RESISTANT, LOW EXPANSION SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE
MIL-DTL-45918 Revision A:2009 CLEVISES AND CONNECTORS (ROD END)
ASTM F 606/F606M : 2016 : REDLINE Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
ASTM F 2886 : 2017 : REDLINE Standard Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications
SAE AMS 4730 : 2017 NICKEL-COPPER ALLOY WIRE, CORROSION-RESISTANT, 67NI - 31CU ANNEALED (400)
SAE AS 7478 : 2017 BOLTS AND SCREWS, STEEL, UNS S66286, CLASSIFICATION: 130 KSI/1200 DEGREES F, 1800 DEGREES F SOLUTION HEAT TREATED, AGED AFTER ROLL THREADED, PROCUREMENT SPECIFICATION FOR
SAE AS 7456 : 2016 STUDS, STEEL, LOW ALLOY, HEAT TREATED, ROLL THREADED
09/30195729 DC : 0 BS ISO 8969 - TIMBER STRUCTURES - TESTING OF PUNCHED METAL PLATE FASTERNERS AND JOINTS
ASTM E 740/E740M : 2003 : R2010 : EDT 1 Standard Practice for Fracture Testing with Surface-Crack Tension Specimens
SAE AMS 5689 : 2018 STEEL, CORROSION AND HEAT RESISTANT, WIRE 18CR - 10.5NI - 0.40TI (321) SOLUTION HEAT TREATED
ANSI NGV2 : 2016 COMPRESSED NATURAL GAS VEHICLE FUEL CONTAINERS
SAE AMS 5664 : 2017 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS, 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1950 DEGREES F (1066 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
SAE AMS 5951 : 2017 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 57NI - 20CR - 10CO - 8.5MO - 2.1TI - 1.5AL - 0.005B, VACUUM INDUCTION AND CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HEAT TREATABLE
ASTM B 777 : 2015 : REDLINE Standard Specification for Tungsten Base, High-Density Metal
SAE AMS 6926 : 2015 TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 13V - 11CR - 3AL, SOLUTION HEAT TREATED AND AGED
SAE AS 7466 : 2014 BOLTS AND SCREWS, NICKEL ALLOY, UNS N07718, TENSILE STRENGTH 185 KSI, FATIGUE RATED, PROCUREMENT SPECIFICATION
SAE AMS 4920 : 2015 TITANIUM ALLOY, FORGINGS, 6AI - 4V, ALPHA-BETA OR BETA PROCESSED, ANNEALED
SAE AMS 7731 : 2018 GOLD WIRE AND RIBBON, 99.97AU, ANNEALED
API SPEC 16F : 2017 SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT
SAE AMS 5884 : 2016 IRON-NICKEL ALLOY, BARS, FORGINGS, AND RINGS, 42FE - 37.5NI - 14CO - 4.8CB(NB) - 1.6TI, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE MULTIPLE MELTED, HIGH TEMPERATURE, LOW EXPANSION
ASTM B 49 : 2017 : REDLINE Standard Specification for Copper Rod for Electrical Purposes
ASTM F 562 : 2013 : REDLINE Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)
SAE AMS 4554 : 2014 BRASS TUBING, SEAMLESS, 66.5CU - 33ZN - 0.45PB, ANNEALED
ASTM B 888/B888M : 2017 : REDLINE Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts
ASTM F 1083 : 2016-02 SPECIFICATION FOR PIPE, STEEL, HOT-DIPPED ZINC-COATED (GALVANIZED) WELDED, FOR FENCE STRUCTURES
SAE AMS 4558 : 2017 BRASS, SEAMLESS TUBING, 66.5CU - 31.5ZN - 1.6PB, DRAWN TEMPER (H58)
SAE AMS 4915 : 2017 TITANIUM ALLOY SHEET, STRIP, AND PLATE 8AL - 1V - 1MO SINGLE ANNEALED
SAE AMS4897D : 2016 TITANIUM ALLOY, SHEET AND STRIP, 15MO - 3.0AL - 2.8CB - 0.20SI
SAE AMS4675E : 2017 NICKEL-COPPER ALLOY, CORROSION-RESISTANT, BARS AND FORGINGS, 67NI - 30CU
SAE AMS 5608 : 2016 COBALT ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 40CO - 22CR - 22NI - 14.5W - 0.07LA, SOLUTION HEAT TREATED
SAE AMS 5391 : 2014 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, INVESTMENT CASTINGS, 73NI - 0.14C - 13CR - 4.5MO - 2.3CB (NB) - 0.75TI - 6.0AL - 0.010B - 0.10ZR VACUUM CAST, AS-CAST
SAE AMS 6925 : 2015 TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 13V - 11CR - 3AL, SOLUTION HEAT TREATED
SAE AMS 5377 : 2013 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, INVESTMENT CASTINGS 73NI - 12CR - 4.5MO - 2.0CB - 0.70TI - 0.05C - 6.0AL - 0.010 - 0.10ZR VACUUM CAST, AS-CAST
SAE AMS 4989 : 2014 TITANIUM ALLOY SHEET, STRIP, AND PLATE, 3AL - 2.5V, ANNEALED
SAE AMS 5759M : 2015 COBALT ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGING STOCK, FORGINGS, AND RINGS 52CO - 20CR - 10NI - 15W
SAE AMS 5687N : 2018 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WIRE, 74NI - 15.5CR - 8.0FE, ANNEALED
SAE AMS 5703 : 2018 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 41.5NI - 16CR - 37FE - 2.9CB - 1.8TI, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1750 DEGREES F (954 DEGREES C) SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED
SAE AMS4933F : 2017 TITANIUM ALLOY EXTRUSIONS AND FLASH WELDED RINGS 8AL - 1MO - 1V SOLUTION HEAT TREATED AND STABILIZED
SAE AMS 7848 : 2015( TANTALUM ALLOY, BARS AND RODS, 90TA - 10W
SAE AMS 7909 : 2015 ALUMINUM BERYLLIUM, NNS PREFORMS HOT ISOSTATIC PRESSED 38AL - 62BE
SAE AMS 6948 : 2015 TITANIUM ALLOY BARS, WIRE, FORGINGS, RINGS, AND DRAWN SHAPES, 4AL - 2.5V -1.5 FE, ANNEALED
ASTM B 829 : 2004 : REV A : R2009 : EDT 1 Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
ASTM F 2924 : 2014 : REDLINE Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion
SAE AMS 7912 : 2015 ALUMINUM-BERYLLIUM ALLOY, EXTRUSIONS, 38AL - 62BE, ANNEALED
SAE AMS 4918 : 2014 TITANIUM ALLOY, SHEET, STRIP, AND PLATE, 6AL - 6V - 2SN, ANNEALED
SAE AMS 4904 : 2015 TITANIUM ALLOY SHEET, STRIP, AND PLATE, 6AL - 4V, SOLUTION HEAT TREATED AND AGED
SAE AMS 5662 : 2016 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AI - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1775 DEGREES F (968 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE
SAE AMS 4881 : D2012(R2018) NICKEL-ALUMINUM-BRONZE, MARTENSITIC, SAND, CENTRIFUGAL AND CONTINUOUS CASTINGS, 78CU - 11AL - 5.1NI - 4.8FE, QUENCH HARDENED AND TEMPER ANNEALED
SAE AMS 4535 : 2015 COPPER-BERYLLIUM ALLOY, MECHANICAL TUBING 98CU - 1.9BE SOLUTION AND PRECIPITATION HEAT TREATED (TF00, FORMERLY AT)
SAE AMS 5540 : 2017 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 74NI - 15.5CR - 8.0FE, ANNEALED
SAE AMS 5714 : 2018 ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT-RESISTANT, 73NI - 15.5CR - 2.5TI - 0.70AL - 7.0FE, PRECIPITATION-HARDENABLE
ASTM E 1450 : 2016 : REDLINE Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
ASTM B 134/B134M : 2015 : REDLINE Standard Specification for Brass Wire
SAE AMS 5917 : 2011 METAL INJECTION MOLDED NICKEL BASED, ALLOY 718 PARTS, HOT ISOSTATICALLY PRESSED, SOLUTIONED AND AGED
ASTM F 2229 : 2012 : REDLINE Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108)
SAE AMS 5707 : 2017 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED 1825 TO 1900 DEGREES F (996 TO 1038 DEGREES C) SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED
SAE AMS 5357 : 2017 STEEL, CORROSION RESISTANT, INVESTMENT CASTINGS, 15CR - 4.6NI - 0.22CB - 2.8CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
SAE AMS 7902 : 2015 BERYLLIUM SHEET AND PLATE, 98BE
SAE AMS 5833 : 2014 COBALT ALLOY, CORROSION AND HEAT-RESISTANT, ROUND WIRE 20CR - 15NI - 40CO - 7.0MO - 16FE SOLUTION HEAT TREATED AND COLD DRAWN
SAE AS 7467 : 2013 BOLTS AND SCREWS, NICKEL ALLOY, UNS N07718, TENSILE STRENGTH 185 KSI, STRESS RUPTURE RATED, PROCUREMENT SPECIFICATION
SAE AMS 6346 : 2013 STEEL BARS, 0.95CR - 0.20MO (0.28 TO 0.33C) (SAE 4130), HARDENED AND TEMPERED, 125 KSI (862 MPA) TENSILE STRENGTH
SAE AMS 7847D : 2015(R 2018) TANTALUM ALLOY SHEET, STRIP, AND PLATE, 90TA - 10W
SAE AS 7454 : 2016 BOLTS AND SCREWS, STEEL, LOW ALLOY, HEAT RESISTANT 135000 PSI TENSILE STRENGTH, NORMALIZED AND TEMPERED, ROLL THREADED
SAE AMS 5919 : 2013 COBALT-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, ROUND BARS 19CR - 36CO - 25NI - 7.0MO - 0.50CB (NB) - 2.9TI - 0.20AL - 9.0FE VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED AND WORK STRENGTHENED, MODIFIED STRENGTH
SAE AMS 5876 : 2018 COBALT ALLOY, CORROSION AND HEAT-RESISTANT, STRIP, 20CR - 15NI - 40CO - 7.0MO - 16FE, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE REMELTED, SOLUTION HEAT TREATED AND COLD ROLLED
SAE AMS 4596E:2010(R2018) COPPER NICKEL TIN ALLOY, BARS AND RODS, 77CU - 15NI - 8SN, SOLUTION ANNEALED AND SPINODAL HARDENED (TX 00)
SAE ARP 5765 : 2015 ANALYTICAL METHODS FOR AIRCRAFT SEAT DESIGN AND EVALUATION
NASA MSFC SPEC 3717 : 2017 SPECIFICATION FOR CONTROL AND QUALIFICATION OF LASER POWDER BED FUSION METALLURGICAL PROCESSES
ASTM B 747 : 2015 : REDLINE Standard Specification for Copper-Zirconium Alloy Sheet and Strip
SAE AMS 5894 : 2016 COBALT ALLOYS, BARS, SHEET, AND PLATE, 60CO - 28CR - 4.5W - 1.15C, SOLUTION HEAT TREATED
SAE AS 7477 : 2017 BOLTS AND SCREWS, STEEL, UNS S66286 TENSILE STRENGTH 130 KSI, PROCUREMENT SPECIFICATION
SAE AMS 5506 : 2018 STEEL, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 13CR (0.30 - 0.40C) (420), ANNEALED
ASTM B 829 : 2004 : REV A : R2017 Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
SAE AMS 4999 : 2016 TITANIUM ALLOY DIRECT DEPOSITED PRODUCTS, 6AL - 4V, ANNEALED
ASTM E 740/E740M : 2003 : R2016 Standard Practice for Fracture Testing with Surface-Crack Tension Specimens
ASTM B 62 : 2017 : REDLINE Standard Specification for Composition Bronze or Ounce Metal Castings
ASTM F 67 : 2013 Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700)
ASTM B 903 : 2015 : REDLINE Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement
ASTM E 1681 : 2003 : R2008 : EDT 2 Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
ASTM F 855 : 2017 : REDLINE SPECIFICATIONS FOR TEMPORARY PROTECTIVE GROUNDS TO BE USED ON DE-ENERGIZED ELECTRIC POWER LINES AND EQUIPMENT
ASTM F 3122 : 2014 Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes
ASTM B 194 : 2015 : REDLINE Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
ASTM E 328 : 2013 : REDLINE Standard Test Methods for Stress Relaxation Tests for Materials and Structures
ASTM B 540 : 1997 : R2002 Standard Specification for Palladium Electrical Contact Alloy
ASTM F 3001 : 2014 : REDLINE Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion
ASTM F 1282 : 2017 : REDLINE Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
ASTM B 455 : 2010 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes
ASTM F 3160 : 2016 Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants
ASTM E 1681: 2003 Standard Test Method for Determining a Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
ASTM E 1681 : 2003 : R2008 : EDT 1 Standard Test Method for Determining a Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
ASTM B 829 : 2004 : REV A Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
ASTM A 608/A608M : 2014 : R2018 Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
ASME A17.1-2016/CSA B44-16 Safety code for elevators and escalators (Bi-national standard, with ASME A17.1)
DIN EN ISO 8401:2016-08 (Draft) METALLIC COATINGS - REVIEW OF METHODS OF MEASUREMENT OF DUCTILITY (ISO 8401:2017)
ISO 13628-5:2009 Petroleum and natural gas industries Design and operation of subsea production systems Part 5: Subsea umbilicals
FF-S-1362 Revision A:2014 STUD, PLAIN, GENERAL PURPOSE
EN ISO/ASTM 52921:2016 Standard terminology for additive manufacturing - Coordinate systems and test methodologies (ISO/ASTM 52921:2013)
EN ISO 13628-5:2009 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 5: Subsea umbilicals (ISO 13628-5:2009)
ABS 0243 : 2017 GUIDANCE NOTES ON SUBSEA HYBRID RISER SYSTEMS
AASHTO M 105 : 2009(R2018) SPECIFICATION FOR GRAY IRON CASTINGS
CSA C83 : 2017 COMMUNICATION AND POWER LINE HARDWARE
SAE AMS 4720 : 2016 WIRE, PHOSPHOR BRONZE, 94CU - 5.0SN - 0.19P, COLD DRAWN, SPRING TEMPER (H08)
ASTM B 551/B551M : 2012 Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate
SAE AMS 4355 : 2015 ALUMINUM ALLOY, DISCONTINUOUSLY REINFORCED HOT ISOSTATICALLY PRESSED SHAPES 2124A/SIC/25P (3[MU]M) (T1P)
SAE AS 7460 : 2017 BOLTS AND SCREWS, TITANIUM ALLOY, 6.0AL-4.0V, PROCUREMENT SPECIFICATION FOR
AASHTO M 181 :2010 SPECIFICATION FOR CHAIN-LINK FENCE
MIL-DTL-32488 Base Document:2014 EXPEDITIONARY BARRIER SYSTEM (EBS)
SAE AMS 7735 : 2018 ALLOY WIRE, ROUND, 35PD - 30AG - 14CU - 10AU - 10PT - 0.85ZN, SOLUTION HEAT TREATED
MIL-DTL-17-130 Revision F:2006 Cables, Radio Frequency, Coaxial, 0.141 Inch (3.58 mm) Diameter, Semirigid, 50 OHMS
ASTM F 1058 : 2016 : REDLINE Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire, Strip, and Strip Bar for Surgical Implant Applications (UNS R30003 and UNS R30008)
ASTM B 658/B658M : 2011 : R2016 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
SAE AMS 4574F : 2017 NICKEL-COPPER ALLOY, CORROSION RESISTANT, TUBING, SEAMLESS 67NI - 31CU ANNEALED
SAE AMS 4982 : 2015 TITANIUM ALLOY WIRE, 44.5 CB
SAE AMS 4368 : 2017 ALUMINUM ALLOY, DISCONTINUOUSLY REINFORCED HOT ISOSTATICALLY PRESSED SHAPES 6061B/SIC/40P (3[MU]M) (T1P)
SAE AMS 2374 : 2016 QUALITY ASSURANCE SAMPLING AND TESTING CORROSION AND HEAT-RESISTANT STEEL AND ALLOY FORGINGS
ASTM B 967/B967M : 2018 : REDLINE Standard Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire
SAE AMS 5582 : 2013 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE TO 155 KSI (1069 MPA) TENSILE STRENGTH
SAE AMS 6907 : 2015 TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 6.0AL - 2.0SN - 4.0ZR - 6.0MO, DUPLEX ANNEALED
ASTM B 169/B169M : 2015 : REDLINE Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar
SAE AMS 5593 : 2016 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 45.5NI - 25.5CR - 3.2CO - 3.2MO - 3.2W - 18.5FE, SOLUTION HEAT TREATED
SAE AMS 4701 : 2015 COPPER WIRE, OXYGEN-FREE, 99.95 (CU+AG), ANNEALED
SAE AMS 4931 : 2015 TITANIUM ALLOY BARS, FORGINGS, AND RINGS, 6AL - 4V EXTRA LOW INTERSTITIAL (ELI), DUPLEX ANNEALED, FRACTURE TOUGHNESS
ASTM E 740/E740M : 2003 PRACTICE FOR FRACTURE TESTING WITH SURFACE-CRACK TENSION SPECIMENS
SAE AMS 4967 : 2014 TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS 6.0AL - 4.0V ANNEALED, HEAT TREATABLE
SAE AMS 5871 : 2015 ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP AND PLATE, 21CR - 32.5NI - 0.38TI - 0.38AL - 45FE, SOLUTION HEAT TREATED
BS EN ISO 13628-5:2009 Petroleum and natural gas industries. Design and operation of subsea production systems Subsea umbilicals
12/30272214 DC : 0 BS ISO DIS 52921 - STANDARD TERMINOLOGY FOR ADDITIVE MANUFACTURING - COORDINATE SYSTEMS AND TEST METHODOLOGIES
SAE AMS 5660 : 2015 NICKEL-IRON ALLOY, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 12.5CR - 42.5NI - 6.0MO - 2.7TI - 0.015B - 34FE, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED
SAE AMS 6936 : 2015 TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 6AL - 6V - 2SN, ANNEALED
ASTM B 140/B140M : 2012 : R2017 Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes
SAE AMS 4983 : 2015 TITANIUM ALLOY, FORGINGS, 10V - 2FE - 3AL, CONSUMABLE ELECTRODE MELTED, SINGLE-STEP SOLUTION HEAT TREATED AND AGED, 180 KSI (1241 MPA) TENSILE STRENGTH
ASTM E 185 : 2016 : REDLINE Standard Practice for Design of Surveillance Programs for Light-Water Moderated Nuclear Power Reactor Vessels
13/30288119 DC : 0 BS EN 61757-2-1 - FIBRE OPTIC SENSORS - STRAIN MEASUREMENT - PART 2-1: FIBRE BRAGG GRATINGS
SAE AMS 7498 : 2016 RINGS, FLASH WELDED TITANIUM AND TITANIUM ALLOYS
ASTM F 3056 : 2014 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion
ASTM B 16/B16M : 2010 Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
NACE SP 06 90 : 2009 STANDARD FORMAT FOR COLLECTION AND COMPILATION OF DATA FOR COMPUTERIZED MATERIAL CORROSION RESISTANCE DATABASE INPUT
ASTM E 606/E606M : 2012 : REDLINE Standard Test Method for Strain-Controlled Fatigue Testing
MIL-DTL-22606 Revision D:2011 FLASK AND END PLUGS, COMPRESSED GAS - AIR, OXYGEN, AND NITROGEN
MIL-DTL-15119 Revision B:2012 Tubing, Round, Seamless Alloy Steel
MIL-DTL-17505 Revision G:2014 Hose and Hose Assembly, Rubber, Oil and Gasoline, Suction and Discharge
ASTM F 961 : 2014 : REDLINE Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)
SAE AMS 4676 : 2017 NICKEL-COPPER ALLOY, CORROSION-RESISTANT, BARS AND FORGINGS, 66.5NI - 3.0AL - 0.62TI - 28CU, HOT-FINISHED, PRECIPITATION HARDENABLE
ANSI/AWWA C903:2016 POLYETHYLENE-ALUMINUM-POLYETHYLENE (PEALPE) COMPOSITE PRESSURE PIPE, 12 MM (1/2 IN.) THROUGH 51 MM (2 IN.), FOR WATER SERVICE
SAE AMS 5758 : 2014 ALLOY, CORROSION-RESISTANT, BARS, 20CR - 35NI - 35CO - 10MO, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE VACUUM REMELTED, SOLUTION HEAT TREATED FOR WORK STRENGTHENING
CSA S347 : 1999 METHOD OF TEST FOR EVALUATION OF TRUSS PLATES USED IN LUMBER JOINTS
SAE AMS5766E:2014 ALLOY, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 21CR - 32.5NI - 0.38TI - 0.38AL - 45FE, SOLUTION HEAT TREATED
SAE AMS 5537 : 2017 COBALT ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, FOIL, AND PLATE, 52CO - 20CR - 10NI - 15W, SOLUTION HEAT TREATED
SAE AMS 5580 : 2015 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING 74NI - 15.5CR - 8.0FE, ANNEALED
MIL-DTL-83420 Revision P:2017 WIRE ROPE, FLEXIBLE, FOR AIRCRAFT CONTROL, GENERAL SPECIFICATION FOR
SAE AMS 6906 : 2015 TITANIUM ALLOY BARS, FORGINGS, AND FORGING STOCK, 6.0AL - 2.0SN - 4.0ZR - 6.0MO, SOLUTION HEAT TREATED AND AGED
ASTM B 248M : 2017 : REDLINE Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric)
ASTM B 250/B250M : 2016 : REDLINE Standard Specification for General Requirements for Wrought Copper Alloy Wire
SAE AMS 4520 : 2015 LEADED PHOSPHOR BRONZE STRIP, 88.5CU - 4.0SN - 4.0PB - 3.0ZN - 0.26P, COLD ROLLED, HALF HARD (HO2)
SAE AMS 5606 : 2013 ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE 41.5NI - 16CR - 37FE - 2.9CB (NB) - 1.8TI CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1750 DEGREES F (954 DEGREES C) SOLUTION HEAT TREATED
SAE AMS 5599 : 2016 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 62NI - 21.5CR - 9.0MO - 3.7 CB (NB), ANNEALED
SAE AMS 5712 : 2016 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 53NI - 19CR - 11CO - 9.8MO - 3.2TI - 1.6AL - 0.006B, VACUUM MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
SAE AMS 4991 : 2014 TITANIUM ALLOY CASTINGS, INVESTMENT 6AL - 4V HOT ISOSTATIC PRESSED, ANNEAL OPTIONAL
SAE AMS 4914 : 2014 TITANIUM ALLOY COLD ROLLED SHEET AND STRIP, 15V - 3AL - 3CR - 3SN, SOLUTION HEAT TREATED
SAE AMS 4924 : 2015 TITANIUM ALLOY BARS, FORGINGS, AND RINGS-15, 5AL - 2.5SN, EXTRA LOW INTERSTITIAL, ANNEALED
SAE AMS 4533 : 2013 COPPER-BERYLLIUM ALLOY, BARS AND RODS, 98CU - 1.9BE, SOLUTION AND PRECIPITATION HEAT TREATED (TF00, FORMERLY AT)
SAE AMS 4677 : 2017 NICKEL-COPPER ALLOY, CORROSION RESISTANT, BARS AND FORGINGS 66.5NI - 2.9AL - 30CU ANNEALED
SAE AMS 4957 : 2016 TITANIUM ALLOY, ROUND BAR AND WIRE, 3AI - 8V - 6CR - 4MO - 4ZR, CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED AND COLD DRAWN
SAE AMS 5605 : 2013 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 41.5NI - 16CR - 37FE - 2.9CB(NB) - 1.8TI, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED
SAE AMS 2370 : 2016 QUALITY ASSURANCE SAMPLING AND TESTING, CARBON AND LOW-ALLOY STEEL WROUGHT PRODUCTS AND FORGING STOCK
SAE AMS 2368 : 2017 SAMPLING AND TESTING OF WROUGHT TITANIUM RAW MATERIAL EXCEPT FORGINGS AND FORGING STOCK
SAE AMS 4902 : 2013 TITANIUM SHEET, STRIP, AND PLATE, COMMERCIALLY-PURE, ANNEALED 40.0 KSI (276 MPA) YIELD STRENGTH
SAE AMS 7850 : 2013 COLUMBIUM (NIOBIUM) SHEET, STRIP, AND FOIL
SAE AMS 5388 : 2014 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, INVESTMENT CASTINGS 53.3NI - 16.5CR - 17MO - 4.5W - 5.8FE - 0.40V (CW-12MW), AS-CAST
SAE AMS 2728 : 2012 HEAT TREATMENT OF WROUGHT COPPER BERYLLIUM ALLOY PARTS
ASTM B 783 : 2013 : REDLINE Standard Specification for Materials for Ferrous Powder Metallurgy (PM) Structural Parts
SAE AMS 4899 : 2016 TITANIUM ALLOY, SHEET, STRIP, AND PLATE, 4.5AI - 3V - 2FE - 2MO, ANNEALED
SAE AMS 7819 : 2013 MOLYBDENUM ALLOY BARS, 0.48TI - 0.90ZR - 0.02C, ARC CAST, STRESS RELIEVED
SAE AMS 2371 : 2016 QUALITY ASSURANCE SAMPLING AND TESTING, CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS, WROUGHT PRODUCTS AND FORGING STOCK
SAE AMS 4640 : 2011 ALUMINUM BRONZE, BARS, RODS, SHAPES, TUBES, AND FORGINGS, 81.5CU - 10.0AL - 4.8NI - 3.0FE, DRAWN AND STRESS RELIEVED (HR50) OR TEMPER ANNEALED (TQ50)
SAE AMS5554G:2016 STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 16.5CR - 4.5NI - 2.9MO - 0.10N, ANNEALED
SAE AMS 4938 : 2013 FORGINGS, TITANIUM ALLOYS HEAT-TREATED, FINISHED-PART PROPERTIES: SHORT-TRANSVERSE TENSILE, FRACTURE TOUGHNESS, AND LONGITUDINAL TIME-DEPENDENT-TENSION
SAE AMS 4950 : 2015 TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6.0AL - 4.0V, SOLUTION HEAT TREATED AND AGED, MODIFIED STRENGTH
SAE AMS 2372 : 2014 QUALITY ASSURANCE SAMPLING AND TESTING, CARBON AND LOW-ALLOY STEEL FORGINGS
SAE AMS 4650 : 2013 COPPER-BERYLLIUM ALLOY, BARS, RODS, SHAPES, AND FORGINGS 98CU - 1.9BE SOLUTION HEAT TREATED TB00 (A)
SAE AMS 5950 : 2014 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET AND STRIP 52.5NI - 19CR - 3.0MO - 5.0CB - 0.90TI - 0.50AL - 18FE VACUUM INDUCTION AND CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
ASTM B 360 : 2015 : REDLINE Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications
ASTM E 290 : 2014 : REDLINE Standard Test Methods for Bend Testing of Material for Ductility
SAE AMS 5918 : 2011 COBALT ALLOY, CORROSION AND HEAT RESISTANT, BARS, 62CO - 28CR - 6MO, WARM-WORKED
SAE AMS 6921 : 2015 TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 3AL - 8V - 6CR - 4MO - 4ZR, SOLUTION HEAT TREATED AND AGED
SAE AMS 4945 : 2014 TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC 3AL - 2.5V, CONTROLLED CONTRACTILE STRAIN RATIO COLD WORKED, STRESS RELIEVED
SAE AMS 5353E : 2007(R2015) STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 16CR - 1.8NI - 0.08N, AS CAST
SAE AMS 5400 : 2014 STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 15CR - 4.6NI - 0.22CB - 2.8CU, SOLUTION AND PRECIPITATION HEAT TREATED (H935), 170 KSI (1172 MPA) TENSILE STRENGTH
SAE AMS 4855 : 2015 LEADED RED BRASS, SAND AND CENTRIFUGAL CASTINGS, 85CU - 5.0SN - 5.0PB - 5.0ZN, AS CAST
SAE MA 3374 : 2012 BOLTS AND SCREWS, UNS S66286, CORROSION AND HEAT RESISTANT STEEL, PROCUREMENT SPECIFICATION, METRIC
SAE AMS 5592 : 2013 IRON-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 44FE - 18.5CR - 35NI - 1.15SI, SOLUTION HEAT TREATED
SAE AMS 5920 : 2013 COBALT-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, ROUND BARS 19CR - 36CO - 25NI - 7.0MO - 0.50CB (NB) - 2.9TI - 0.20AL - 9.0FE VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, WORK STRENGTHENED AND AGED, MODIFIED STRENGTH
SAE AMS 4984F : 2015 TITANIUM ALLOY FORGINGS, 10V - 2FE - 3AL, CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED AND AGED, 173 KSI (1193 MPA) TENSILE STRENGTH
ASTM E 143 : 2013 : REDLINE Standard Test Method for Shear Modulus at Room Temperature
ASTM B 819 : 2018 : REDLINE Standard Specification for Seamless Copper Tube for Medical Gas Systems
ASTM F 2066 : 2018 : REDLINE Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150)
ASTM E 1304 : 1997 : R2014 Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
ASTM B 706 : 2000 Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube
ASTM A 1058 : 2014 : REDLINE Standard Test Methods for Mechanical Testing of Steel Products—Metric
ASTM E 1681 : 2003 : R2008 Standard Test Method for Determining a Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
ASTM B 455 : 2010 : R2017 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes
ASTM B 540 : 1997 Standard Specification for Palladium Electrical Contact Alloy
ASTM E 111 : 2017 : REDLINE Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus
ASTM B 19 : 2015 : REDLINE Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks
ASTM B 467 : 2014 : REDLINE Standard Specification for Welded Copper-Nickel Pipe
ASTM F 67 : 2013 : R2017 Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700)
ASTM B 122/B122M : 2016 : REDLINE Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
ASTM B 688 : 1996 : R2009 Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip
ASTM E 2207 : 2015 : REDLINE Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens
ASTM B 138/B138M : 2011 Standard Specification for Manganese Bronze Rod, Bar, and Shapes
ISO/ASTM 52921:2013 Standard terminology for additive manufacturing — Coordinate systems and test methodologies
SAE AMS4895:2023 Titanium Alloy, Round Bars 5Al - 1Fe Annealed

ASTM E 345 : 2016 : REDLINE Standard Test Methods of Tension Testing of Metallic Foil
ASTM E 2658 : 2015 : REDLINE Standard Practices for Verification of Speed for Material Testing Machines
ASTM E 83 : 2016 : REDLINE Standard Practice for Verification and Classification of Extensometer Systems
ASTM B 557 : 2015 : REDLINE Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
ASTM B 557M : 2015 : REDLINE Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)
ASTM E 1856 : 2013 : REDLINE Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines
ASTM D 1566 : 2015 : REDLINE TERMINOLOGY RELATING TO RUBBER

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.