ASTM F 3302 : 2018
Current
The latest, up-to-date edition.
Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion
01-15-2018
This specification covers additive manufacturing of components via full-melt powder bed fusion processing of titanium alloys.
Committee |
F 42
|
DocumentType |
Standard
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
1.1This specification covers additive manufacturing of components via full-melt powder bed fusion processing of titanium alloys. Components made using this processing method are typically used in applications that require mechanical properties similar to wrought products. Products built to this specification may require additional post-processing in the form of machining, polishing, etc., to meet necessary surface finish and dimensional requirements.
1.2This specification is intended for the use of purchasers or producers, or both, of additively manufactured titanium components for defining the requirements and ensuring component properties.
1.3Users are advised to use this specification as a basis for obtaining components that will meet the minimum acceptance requirements established and revised by consensus of committee members.
1.4User requirements considered more stringent may be met by the addition to the purchase order of one or more supplementary requirements, which include, but are not limited to, those listed in Supplementary Requirements S1-S16.
1.5The values stated in SI units are to be regarded as the standard. Other units are included only for informational purposes.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM E 1447 : 2001 | Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity Method |
ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
ASTM E 1820 : 2013 | Standard Test Method for Measurement of Fracture Toughness |
ASTM E 1409 : 2013 | Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion |
ASTM E 1820 : 2009 : EDT 1 | Standard Test Method for Measurement of Fracture Toughness |
ASTM E 1820 : 2023 : REV B | Standard Test Method for Measurement of Fracture Toughness |
ASTM E 1941 : 2010 : R2016 | Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis |
ASTM E 11 : 2020 | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
ASTM D 3951 : 2010 | Standard Practice for Commercial Packaging |
ASTM E 18 : 2024 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
SAE AMS2801B | Heat Treatment of Titanium Alloy Parts |
ASTM E 2371 : 2013 | Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology) |
ASTM F 2971 : 2013 | Standard Practice for Reporting Data for Test Specimens Prepared by Additive Manufacturing |
ASTM E 8/E8M : 2024 | Standard Test Methods for Tension Testing of Metallic Materials |
ASTM E 23 : 2024 | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials |
ASTM E 647 : 1995 | Standard Test Method for Measurement of Fatigue Crack Growth Rates |
ASTM E 1742 : 2000 | Standard Practice for Radiographic Examination |
ASTM B 311 : 2017 | Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity |
ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
ASTM E 1447 : 2022 | Standard Test Method for Determination of Hydrogen in Reactive Metals and Reactive Metal Alloys by Inert Gas Fusion with Detection by Thermal Conductivity or Infrared Spectrometry |
ASTM E 8/E8M : 2016 : REV A : EDT 1 | Standard Test Methods for Tension Testing of Metallic Materials |
ASTM B 964 : 2016 : REDLINE | Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel |
ASTM E 29 : 2013 : R2019 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
ASTM E 1820 : 2021 | Standard Test Method for Measurement of Fracture Toughness |
ASTM E 1941 : 2010 | Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis |
ASTM E 1417 : 2005 | Standard Practice for Liquid Penetrant Testing |
ASTM B 348 : 2013 : REDLINE | Standard Specification for Titanium and Titanium Alloy Bars and Billets |
ASTM E 647 : 2024 | Standard Test Method for Measurement of Fatigue Crack Growth Rates |
ASTM E 1820 : 2011 : EDT 2 | Standard Test Method for Measurement of Fracture Toughness |
ISO 9044:2016 | Industrial woven wire cloth Technical requirements and tests |
ASTM E 1450 : 2016 | Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium |
ASTM D 3951 : 1998 | Standard Practice for Commercial Packaging |
ASTM E 606 : 1992 : R1998 | Standard Practice for Strain-Controlled Fatigue Testing |
ASTM E 8/E8M : 2021 | Standard Test Methods for Tension Testing of Metallic Materials |
ASTM E 384 : 2022 | Standard Test Method for Microindentation Hardness of Materials |
ASTM B 348 : 2005 : EDT 1 | Standard Specification for Titanium and Titanium Alloy Bars and Billets |
ASTM E 11 : 2024 | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
ASTM E 18 : 2022 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
ASTM E 1409 : 2004 | Standard Test Method for Determination of Oxygen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique |
ASTM E 10 : 2023 | Standard Test Method for Brinell Hardness of Metallic Materials |
ASTM B 964 : 2016 | Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel |
ASTM E 399 : 2024 | Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials |
ASTM F 2971 : 2013 : R2021 | Standard Practice for Reporting Data for Test Specimens Prepared by Additive Manufacturing |
ASTM E 1820 : 2020 | Standard Test Method for Measurement of Fracture Toughness |
ISO/ASTM 52921:2013 | Standard terminology for additive manufacturing — Coordinate systems and test methodologies |
ASTM E 29 : 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
ASTM E 23 : 2022 | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials |
ASTM F 1472 : 2023 | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
ASTM F 1472 : 2002 : REV A | Standard Specification for Wrought Titanium -6Aluminum -4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
ASTM B 214 : 2022 | Standard Test Method for Sieve Analysis of Metal Powders |
ASTM E 2368 : 2010 : R2017 | Standard Practice for Strain Controlled Thermomechanical Fatigue Testing |
ASTM E 10 : 2001 | Standard Test Method for Brinell Hardness of Metallic Materials |
ASTM E 1447 : 1992 : R1996 | Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity Method |
ASTM E 21 : 2020 | Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials |
ASTM B 311 : 2017 : REDLINE | Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity |
ASTM E 1409 : 2013 : R2021 | Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion |
ASTM F 1472 : 2014 : REDLINE | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
ASTM B 855 : 2017 : REDLINE | Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel |
ASTM E 1409 : 2005 | Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique |
ASTM E 647 : 2023 | Standard Test Method for Measurement of Fatigue Crack Growth Rates |
ASTM E 2368 : 2024 | Standard Practice for Strain Controlled Thermomechanical Fatigue Testing |
ASTM E 466 : 2015 : REDLINE | Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials |
ASTM E 384 : 2017 : REDLINE | Standard Test Method for Microindentation Hardness of Materials |
ASTM E 18 : 2020 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
ASTM B 855 : 2017 | Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel |
ASTM E 3 : 2011 : R2017 | Standard Guide for Preparation of Metallographic Specimens |
ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
ASTM E 384 : 2011 | Standard Test Method for Knoop and Vickers Hardness of Materials |
ISO 5832-3:2016 | Implants for surgery Metallic materials Part 3: Wrought titanium 6-aluminium 4-vanadium alloy |
ASTM E 1820 : 2011 : EDT 1 | Standard Test Method for Measurement of Fracture Toughness |
ISO 13485:2016 | Medical devices Quality management systems Requirements for regulatory purposes |
ASTM E 1820 : 2006 | Standard Test Method for Measurement of Fracture Toughness |
ASTM B 311 : 1993 : R1997 | Test Method for Density Determination for Powder Metallurgy (P/M) Materials Containing Less Than Two Percent Porosity |
ASTM E 647 : 2022 : REV A | Standard Test Method for Measurement of Fatigue Crack Growth Rates |
ASTM E 1450 : 2003 | Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium |
ISO 4545-1:2005 | Metallic materials Knoop hardness test Part 1: Test method |
ASTM F 136 : 2013 : REDLINE | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401) |
ASTM E 466 : 1996 | Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials |
ASTM B 213 : 2017 : REDLINE | Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel |
ASTM E 1820 : 2018 | Standard Test Method for Measurement of Fracture Toughness |
ASTM E 399 : 2020 : REV A | Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials |
ASTM E 1820 : 2011 | Standard Test Method for Measurement of Fracture Toughness |
ASTM E 2368 : 2004 | Standard Practice for Strain Controlled Thermomechanical Fatigue Testing |
ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
SAE AS1814E | Terminology for Titanium Microstructures |
ASTM F 3122 : 2014 | Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes |
ASTM D 3951 : 2015 | Standard Practice for Commercial Packaging |
ASTM F 3049 : 2014 : R2021 | Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes |
ASTM E 2368 : 2004 : EDT 1 | Standard Practice for Strain Controlled Thermomechanical Fatigue Testing |
ASTM E 1820 : 2008 : REV A | Standard Test Method for Measurement of Fracture Toughness |
ASTM F 1472 : 2000 | Standard Specification for Wrought Titanium -6Aluminum -4Vanadium Alloy (UNS R56400) for Surgical Implant Applications |
ISO 12737:2010 | Metallic materials Determination of plane-strain fracture toughness |
ASTM E 10 : 2017-05 | TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS |
ASTM B 243 : 2022 | Standard Terminology of Powder Metallurgy |
ASTM E 1450 : 2009 | Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium |
ASTM E 23 : 2023 : REV A | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials |
ASTM E 1417 : 2005 : EDT 1 | Standard Practice for Liquid Penetrant Testing |
ASTM F 3049 : 2014 | Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes |
ASTM E 1742 : 2008 : REV A | Standard Practice for Radiographic Examination |
ASTM E 647 : 2022 | Standard Test Method for Measurement of Fatigue Crack Growth Rates |
ASTM E 1820 : 2017 | Standard Test Method for Measurement of Fracture Toughness |
ASTM E 11 : 2022 | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
ASTM D 3951 : 2018 | Standard Practice for Commercial Packaging |
ASTM E 647 : 2023 : REV B | Standard Test Method for Measurement of Fatigue Crack Growth Rates |
SAE AS9100D | Quality Management Systems - Requirements for Aviation, Space, and Defense Organizations |
ASTM E 399 : 2023 | Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials |
ASTM E 1820 : 2020 : EDT 1 | Standard Test Method for Measurement of Fracture Toughness |
ASTM E 1447 : 2004 | Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity Method |
ASTM F 136 : 1998 | Standard Specification for Wrought Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) Alloy (UNS R56401) for Surgical Implant Applications |
ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
ASTM B 964 : 2023 | Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel |
ASTM D 3951 : 2018 : R2023 | Standard Practice for Commercial Packaging |
ASTM E 1450 : 1992 : R1998 | Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium |
ASTM E 8/E8M : 2022 | Standard Test Methods for Tension Testing of Metallic Materials |
ASTM F 1472 : 2008 | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
ASTM E 1409 : 2013 : REDLINE | Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion |
ASTM B 214 : 2016 : REDLINE | Standard Test Method for Sieve Analysis of Metal Powders |
ASTM F 1472 : 2020 : REV A | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
ASTM E 9 : 2009 | Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature |
ASTM E 1417 : 1999 | Standard Practice for Liquid Penetrant Examination |
ASTM E 1447 : 2009 | Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method |
ASTM E 647 : 2023 : REV A | Standard Test Method for Measurement of Fatigue Crack Growth Rates |
ISO 19819:2004 | Metallic materials Tensile testing in liquid helium |
ASTM E 1820 : 2017 : REV A | Standard Test Method for Measurement of Fracture Toughness |
ASTM E 2626 : 2008 | Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals |
ISO 12111:2011 | Metallic materials — Fatigue testing — Strain-controlled thermomechanical fatigue testing method |
ASTM B 311 : 2022 | Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity |
ASTM E 1820 : 2005 | Standard Test Method for Measurement of Fracture Toughness |
ASTM E 1820 : 2022 : EDT 1 | Standard Test Method for Measurement of Fracture Toughness |
ASTM E 238 : 1984 : R1996 | Standard Test Method for Pin-Type Bearing Test of Metallic Materials |
ASTM B 243 : 2020 | Standard Terminology of Powder Metallurgy |
ASTM E 23 : 2018 | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials |
ASTM E 466 : 2021 | Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials |
ASTM E 23 : 2002 | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials |
SAE AMS2249G | Chemical Check Analysis Limits Titanium and Titanium Alloys |
ASTM E 1820 : 2015 | Standard Test Method for Measurement of Fracture Toughness |
ASTM E 466 : 2015 | Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials |
ASTM E 1820 : 2020 : REV B | Standard Test Method for Measurement of Fracture Toughness |
ASTM E 1820 : 2018 : REV A : EDT 1 | Standard Test Method for Measurement of Fracture Toughness |
ASTM B 214 : 2016 | Standard Test Method for Sieve Analysis of Metal Powders |
ASTM E 1941 : 2004 | Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys |
ASTM E 1820 : 2020 : REV A | Standard Test Method for Measurement of Fracture Toughness |
ASTM E 1450 : 2024 | Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium |
ASTM F 1472 : 2014 | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
ASTM B 822 : 2017 : REDLINE | Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering |
SAE AMSH81200D | Heat Treatment of Titanium and Titanium Alloys |
ASTM E 647 : 2015 : EDT 1 | Standard Test Method for Measurement of Fatigue Crack Growth Rates |
ISO 6508:1986 | Metallic materials Hardness test Rockwell test (scales A - B - C - D - E - F - G - H - K) |
ASTM E 1820 : 2006 : EDT 1 | Standard Test Method for Measurement of Fracture Toughness |
ISO 12108:2012 | Metallic materials Fatigue testing Fatigue crack growth method |
ASTM E 23 : 2023 | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials |
ASTM E 2371 : 2004 | Standard Test Method for Analysis of Titanium and Titanium Alloys by Atomic Emission Plasma Spectrometry (Withdrawn 2013) |
ASTM E 1447 : 2009 : R2016 | Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by Inert Gas Fusion Thermal Conductivity/Infrared Detection Method |
ASTM E 1820 : 2023 | Standard Test Method for Measurement of Fracture Toughness |
ASTM E 1820 : 2024 | Standard Test Method for Measurement of Fracture Toughness |
ISO/ASTM 52915:2016 | Specification for additive manufacturing file format (AMF) Version 1.2 |
ASTM E 11 : 2017 : REDLINE | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
ASTM E 1742 : 2005 | Standard Practice for Radiographic Examination |
ISO/ASTM 52900:2015 | Additive manufacturing General principles Terminology |
ASTM B 243 : 2023 | Standard Terminology of Powder Metallurgy |
ASTM E 18 : 2019 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
ISO 9001:2015 | Quality management systems — Requirements |
ASTM E 9 : 1989 : REV A : R1995 | Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature |
ISO 12135:2016 | Metallic materials Unified method of test for the determination of quasistatic fracture toughness |
ASTM B 855 : 2022 | Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel |
ASTM F 1472 : 1999 | Standard Specification for Wrought Titanium -6Aluminum -4Vanadium Alloy (UNS R56400) for Surgical Implant Applications |
ASTM B 600 : 2022 | Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces |
ASTM E 2626 : 2008 : EDT 1 | Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals (Withdrawn 2017) |
ASTM E 1820 : 2015 : REV A : EDT 1 | Standard Test Method for Measurement of Fracture Toughness |
ASTM E 1820 : 2018 : REV A | Standard Test Method for Measurement of Fracture Toughness |
ISO 1099:2017 | Metallic materials — Fatigue testing — Axial force-controlled method |
ASTM E 1409 : 1997 | Standard Test Method for Determination of Oxygen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique |
ASTM E 384 : 2017 | Standard Test Method for Microindentation Hardness of Materials |
ASTM E 1820 : 2016 | Standard Test Method for Measurement of Fracture Toughness |
ASTM E 1409 : 2008 | Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique |
ASTM B 769 : 2011 : R2021 | Standard Test Method for Shear Testing of Aluminum Alloys |
ASTM E 1820 : 1999 : REV A | Standard Test Method for Measurement of Fracture Toughness |
ASTM E 1820 : 2001 | Standard Test Method for Measurement of Fracture Toughness |
ASTM E 647 : 2022 : REV B | Standard Test Method for Measurement of Fatigue Crack Growth Rates |
ASTM E 1742 : 2006 | Standard Practice for Radiographic Examination |
ASTM E 399 : 2022 | Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials |
ASTM E 1820 : 2013 : EDT 1 | Standard Test Method for Measurement of Fracture Toughness |
ASTM E 1820 : 2015 : REV A | Standard Test Method for Measurement of Fracture Toughness |
ASTM E 1820 : 2022 | Standard Test Method for Measurement of Fracture Toughness |
ASTM B 243 : 2024 | Standard Terminology of Powder Metallurgy |
ASTM E 1450 : 2016 : REDLINE | Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium |
ASTM E 1941 : 1998 | Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys |
ASTM F 136 : 2013 | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401) |
ASTM E 1820 : 2009 | Standard Test Method for Measurement of Fracture Toughness |
ASTM E 2368 : 2010 | Standard Practice for Strain Controlled Thermomechanical Fatigue Testing |
ASTM E 1820 : 2005 : REV A | Standard Test Method for Measurement of Fracture Toughness |
ASTM E 1450 : 1992 : R1998 : EDT 1 | Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium |
ASTM E 407 : 2007 : R2015 : EDT 1 | Standard Practice for Microetching Metals and Alloys |
ASTM F 1472 : 2008 : EDT 1 | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
ASTM F 136 : 2013 : R2021 : EDT 1 | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401) |
ASTM E 407 : 2023 | Standard Practice for Microetching Metals and Alloys |
ASTM F 3122 : 2014 : R2022 | Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes |
ASTM E 2371 : 2021 : REV A | Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology) |
ASTM E 8/E8M : 2016-09 | TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS |
ASTM E 10 : 2018 | Standard Test Method for Brinell Hardness of Metallic Materials |
ISO/ASTM 52901:2017 | Additive manufacturing — General principles — Requirements for purchased AM parts |
ASTM E 1447 : 2005 | Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method |
ASTM B 600 : 2011 : R2017 | Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces |
ASTM E 1820 : 2023 : REV A | Standard Test Method for Measurement of Fracture Toughness |
ASTM B 769 : 2011 : R2016 | Standard Test Method for Shear Testing of Aluminum Alloys |
ASTM E 29 : 2022 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
ASTM E 2371 : 2021 | Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.