• There are no items in your cart

EN 1396:2015

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
Withdrawn date

10-31-2015

Published date

04-01-2015

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Technical conditions for inspection and delivery
5 Mechanical properties
6 Organic coating properties
7 Inspection documents
8 Marking
9 Packing
10 Arbitration tests
Annex A (normative) - Rules for rounding
Annex B (informative) - Examples of coating systems
Annex C (informative) - Guidelines for organic
        coatings
Annex D (informative) - Guidelines for storage
        and subsequent processing
Bibliography

This European Standard specifies the particular requirements for wrought aluminium and wrought aluminium alloys in the form of coil coated sheet and strip for general applications. This product is generally supplied in thicknesses up to 3,0 mm.It applies to cold-rolled aluminium and aluminium alloy strip coated by the coil coating process both with liquid as well as with powder paints, either in the final width or slit afterwards, and to sheet obtained from such strip.It does not apply to coil coated sheet and strip used for special applications such as cans, closures and lids which are dealt with in separate EN 541.

Committee
CEN/TC 132
DevelopmentNote
Supersedes PREN 1396. (04/2015)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Withdrawn
Supersedes

Standards Relationship
ONORM EN 1396 : 2015 Identical
DS EN 1396 : 2015 Identical
NS EN 1396 : 1996 Identical
NEN EN 1396 : 2015 Identical
SN EN 1396 : 2015 Identical
BS EN 1396:2007 Identical
UNI EN 1396 : 2007 Identical
UNE-EN 1396:2015 Identical
PN EN 1396 : 2015 Identical
DIN EN 1396:2015-06 Identical
I.S. EN 1396:2015 Identical
NBN EN 1396 : 2015 Identical
NF EN 1396 : 2015 Identical
BS ISO 22526-1:2020 Identical
NS-EN 1396:2015 Identical
BS EN 1396:2015 Identical

PREN 13523-21 : DRAFT 2016 COIL COATED METALS - TEST METHODS - PART 21: EVALUATION OF OUTDOOR EXPOSED PANELS
03/309850 DC : DRAFT JUNE 2003 EN 13523-24 - COIL COATED METALS - TEST METHODS - PART 24: RESISTANCE TO BLOCKING AND PRESSURE MARKING
UNI EN 13523-19 : 2011 COIL COATED METALS - TEST METHODS - PART 19: PANEL DESIGN AND METHOD OF ATMOSPHERIC EXPOSURE TESTING
15/30329701 DC : 0 BS EN 13523-1 - COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS
15/30329698 DC : 0 BS EN 13523-27 - COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST)
12/30268955 DC : 0 BS EN 13523-3 - COIL COATED METALS - TEST METHODS - PART 3: COLOUR DIFFERENCE - INSTRUMENTAL COMPARISON
BS EN 13523-4:2014 Coil coated metals. Test methods Pencil hardness
FD CEN/TR 16239 : 2011 FD INSTALLATION RULES OF FIBROUS (GYPSUM) PLASTER WORKS
BS EN 1090-5:2017 Execution of steel structures and aluminium structures Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications
08/30188882 DC : DRAFT DEC 2008 BS EN 13523-29 - COIL COATED METALS - TEST METHODS - PART 29: RESISTANCE TO ENVIRONMENTAL SOILING (DIRT PICK-UP AND STRIPPING)
PREN 13523-13 : DRAFT 2012 COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT
12/30268970 DC : 0 BS EN 13523-25 - COIL COATED METALS - TEST METHODS - PART 25: RESISTANCE TO HUMIDITY
03/309845 DC : DRAFT JUNE 2003 EN 13523-12 - COIL COATED METALS - TEST METHODS - PART 12: RESISTANCE TO SCRATCHING
15/30315346 DC : 0 BS ISO 17880 - CELLULAR PLASTIC - SELF-SUPPORTING METAL-FACED SANDWICH PANELS - COMPLEMENTARY ELEMENT
03/309846 DC : DRAFT JUNE 2003 EN 13523-16 - COIL COATED METALS - TEST METHODS - PART 16: RESISTANCE TO ABRASION
PREN 13523-10 : DRAFT 2015 COIL COATED METALS - TEST METHODS - PART 10: RESISTANCE TO FLUORESCENT UV RADIATION AND WATER CONDENSATION
BS EN 16074:2011 Paints and varnishes. Determination of non-volatile matter content and spreading rate of coil coating materials
DIN EN 1999-1-4:2010-05 Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting; German version EN 1999-1-4:2007 + AC:2009
DIN EN 13523-29:2015-12 (Draft) COIL COATED METALS - TEST METHODS - PART 29: RESISTANCE TO ENVIRONMENTAL SOILING (DIRT PICK-UP AND STRIPING)
I.S. EN 13523-27:2017 COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST)
UNE-EN 1090-5:2017 Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications
UNE-EN 13523-29:2017 Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping)
EN 573-3:2013 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
I.S. EN 508-2:2008 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELFSUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM
I.S. EN 573-3:2013 ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 3: CHEMICAL COMPOSITION AND FORM OF PRODUCTS
DIN EN 13523-15:2015-09 Coil coated metals - Test methods - Part 15: Metamerism
BS EN 13523-18:2002 Coil coated metals. Test methods Resistance to staining
BS EN 13523-13:2014 Coil coated metals. Test methods Resistance to accelerated ageing by the use of heat
BS EN 13523-20:2011 Coil coated metals. Test methods Foam adhesion
BS EN 13523-2:2014 Coil coated metals. Test methods Gloss
BS EN 13523-8:2017 Coil coated metals. Test methods Resistance to salt spray (fog)
BS EN 13523-24:2017 Coil coated metals. Test methods Resistance to blocking and pressure marking
BS EN 13523-11:2011 Coil coated metals. Test methods Resistance to solvents (rubbing test)
BS EN 13964:2014 Suspended ceilings. Requirements and test methods
DIN EN 14782:2006-03 Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements
UNI EN 13523-3 : 2014 COIL COATED METALS - TEST METHODS - PART 3: COLOUR DIFFERENCE - INSTRUMENTAL COMPARISON
EN 13523-23:2015 Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide
EN 13523-24:2017 Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking
EN 13523-17:2011 Coil coated metals - Test methods - Part 17: Adhesion of strippable films
EN 13523-0:2014 Coil coated metals - Test methods - Part 0: General introduction
DIN EN 508-2:2009-07 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM
DIN EN 1090-5:2017-07 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
EN 13523-5:2014 Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test)
EN 13523-26:2014 Coil coated metals - Test methods - Part 26: Resistance to condensation of water
EN 13523-9:2014 Coil coated metals - Test methods - Part 9: Resistance to water immersion
DIN EN 13523-22:2017-05 COIL COATED METALS - TEST METHODS - PART 22: COLOUR DIFFERENCE - VISUAL COMPARISON
DIN EN 13523-1:2017-05 COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS
EN 13523-13:2014 Coil coated metals - Test methods - Part 13: Resistance to accelerated ageing by the use of heat
EN 13523-11:2011 Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test)
EN 13523-14:2014 Coil coated metals - Test methods - Part 14: Chalking (Helmen method)
EN 13523-12:2017 Coil coated metals - Test methods - Part 12: Resistance to scratching
EN 13523-29:2017 Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping)
EN 13523-4:2014 Coil coated metals - Test methods - Part 4: Pencil hardness
EN 13523-8:2017 Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)
12/30268952 DC : 0 BS EN 13523-0 - COIL COATED METALS - TEST METHODS - PART 0: GENERAL INTRODUCTION AND LIST OF TEST METHODS
15/30329710 DC : 0 BS EN 13523-29 - COIL COATED METALS - TEST METHODS - PART 29: RESISTANCE TO ENVIRONMENTAL SOILING (DIRT PICK-UP AND STRIPING)
03/309849 DC : DRAFT JUNE 2003 EN 13523-20 - COIL COATED METALS - TEST METHODS - PART 20: FOAM ADHESION
13/30266550 DC : 0 BS EN 14509 - SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
03/309848 DC : DRAFT JUNE 2003 EN 13523-19 - COIL COATED METALS - TEST METHODS - PART 19: PANEL DESIGN AND METHOD OF ATMOSPHERIC EXPOSURE TESTING
PREN 1090-3 : DRAFT 2017 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
12/30268976 DC : 0 BS EN 13523-4 - COIL COATED METALS - TEST METHODS - PART 4: PENCIL HARDNESS
12/30268967 DC : 0 BS EN 13523-14 - COIL COATED METALS - TEST METHODS - PART 14: CHALKING (HELMEN METHOD)
I.S. EN 13523-29:2017 COIL COATED METALS - TEST METHODS - PART 29: RESISTANCE TO ENVIRONMENTAL SOILING (DIRT PICK-UP AND STRIPING)
DIN EN 13523-4:2014-10 COIL COATED METALS - TEST METHODS - PART 4: PENCIL HARDNESS
UNE-EN 13523-27:2017 Coil coated metals - Test methods - Part 27: Resistance to humid poultice (Cataplasm test)
02/105004 DC : DRAFT JULY 2002 PREN 14509 - SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING SANDWICH PANELS - FACTORY MADE PRODUCTS - SPECIFICATION
PREN 13523-8 : DRAFT 2016 COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG)
DIN EN 14509:2013-12 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
BS EN 13523-29:2017 Coil coated metals. Test methods Resistance to environmental soiling (Dirt pick-up and striping)
12/30268958 DC : 0 BS EN 13523-5 - COIL COATED METALS - TEST METHODS - PART 5: RESISTANCE TO RAPID DEFORMATION (IMPACT TEST)
01/101336 DC : DRAFT JAN 2001 PREN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
14/30291744 DC : 0 BS EN 13523-23 - COIL COATED METALS - TEST METHODS - PART 23: RESISTANCE TO HUMID ATMOSPHERES CONTAINING SULFUR DIOXIDE
PREN 13523-20 : DRAFT 2010 COIL COATED METALS - TEST METHODS - PART 20: FOAM ADHESION
PREN 13523-3 : DRAFT 2012 COIL COATED METALS - TEST METHODS - PART 3: COLOUR DIFFERENCE - INSTRUMENTAL COMPARISON
PREN 13523-4 : DRAFT 2012 COIL COATED METALS - TEST METHODS - PART 4: PENCIL HARDNESS
I.S. EN 16074:2011 PAINTS AND VARNISHES - DETERMINATION OF NON-VOLATILE-MATTER CONTENT AND SPREADING RATE OF COIL COATING MATERIALS
PREN 13523-0 : DRAFT 2012 COIL COATED METALS - TEST METHODS - PART 0: GENERAL INTRODUCTION AND LIST OF TEST METHODS
PREN 13523-7 : DRAFT 2012 COIL COATED METALS - TEST METHODS - PART 7: RESISTANCE TO CRACKING ON BENDING (T-BEND TEST)
I.S. EN 1999-1-4:2007 EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING (INCLUDING IRISH NATIONAL ANNEX)
DIN EN 13523-22:2015-12 (Draft) COIL COATED METALS - TEST METHODS - PART 22: COLOUR DIFFERENCE - VISUAL COMPARISON
DIN EN 13523-26:2014-08 Coil coated metals - Test methods - Part 26: Resistance to condensation of water
DIN EN 13523-16:2005-02 Coil coated metals - Test methods - Part 16: Resistance to abrasion
DIN EN 13523-10:2015-12 (Draft) COIL COATED METALS - TEST METHODS - PART 10: RESISTANCE TO FLUORESCENT UV RADIATION AND WATER CONDENSATION
DIN EN 13523-17:2012-02 COIL COATED METALS - TEST METHODS - PART 17: ADHESION OF STRIPPABLE FILMS
DIN EN 15088 E : 2006 ALUMINIUM AND ALUMINIUM ALLOYS - STRUCTURAL PRODUCTS FOR CONSTRUCTION WORKS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
DIN EN 14782:2015-09 (Draft) SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
BS EN ISO 1514:2004 Paints and varnishes. Standard panels for testing
UNE-EN 13523-2:2014 Coil coated metals - Test methods - Part 2: Gloss
BS EN 13523-16:2004 Coil coated metals. Test methods Resistance to abrasion
BS EN 14782:2006 Self-supporting metal sheet for roofing, external cladding and internal lining. Product specification and requirements
BS EN 13523-1:2017 Coil coated metals. Test methods Film thickness
EN 13523-20:2011 Coil coated metals - Test methods - Part 20: Foam adhesion
UNE-EN 13523-11:2012 Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test)
I.S. EN 13523-7:2014 COIL COATED METALS - TEST METHODS - PART 7: RESISTANCE TO CRACKING ON BENDING (T-BEND TEST)
I.S. EN 485-1:2016 ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
I.S. EN 612:2005 EAVES GUTTERS WITH BEAD STIFFENED FRONTS AND RAINWATER PIPES WITH SEAMED JOINTS MADE OF METAL SHEET
I.S. EN 13523-5:2014 COIL COATED METALS - TEST METHODS - PART 5: RESISTANCE TO RAPID DEFORMATION (IMPACT TEST)
I.S. EN 13523-23:2015 COIL COATED METALS - TEST METHODS - PART 23: RESISTANCE TO HUMID ATMOSPHERES CONTAINING SULFUR DIOXIDE
I.S. EN 13523-25:2014 COIL COATED METALS - TEST METHODS - PART 25: RESISTANCE TO HUMIDITY
I.S. EN 13523-21:2017 COIL COATED METALS - TEST METHODS - PART 21: EVALUATION OF OUTDOOR EXPOSED PANELS
I.S. EN 13523-8:2017 COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG)
I.S. EN 13523-13:2014 COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT
I.S. EN 13523-12:2017 COIL COATED METALS - TEST METHODS - PART 12: RESISTANCE TO SCRATCHING
I.S. EN 13523-1:2017 COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS
DIN EN 13523-11:2011-09 COIL COATED METALS - TEST METHODS - PART 11: RESISTANCE TO SOLVENTS (RUBBING TEST)
I.S. EN 13523-2:2014 COIL COATED METALS - TEST METHODS - PART 2: GLOSS
I.S. EN 13523-3:2014 COIL COATED METALS - TEST METHODS - PART 3: COLOUR DIFFERENCE - INSTRUMENTAL COMPARISON
I.S. EN 13523-15:2015 COIL COATED METALS - TEST METHODS - PART 15: METAMERISM
I.S. EN 13523-10:2017 COIL COATED METALS - TEST METHODS - PART 10: RESISTANCE TO FLUORESCENT UV RADIATION AND WATER CONDENSATION
I.S. EN ISO 1514:2016 PAINTS AND VARNISHES - STANDARD PANELS FOR TESTING (ISO 1514:2016)
I.S. EN 13964:2014 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
I.S. EN 13523-26:2014 COIL COATED METALS - TEST METHODS - PART 26: RESISTANCE TO CONDENSATION OF WATER
I.S. EN 13523-22:2017 COIL COATED METALS - TEST METHODS - PART 22: COLOUR DIFFERENCE - VISUAL COMPARISON
I.S. EN 13523-14:2014 COIL COATED METALS - TEST METHODS - PART 14: CHALKING (HELMEN METHOD)
I.S. EN 13523-24:2017 COIL COATED METALS - TEST METHODS - PART 24: RESISTANCE TO BLOCKING AND PRESSURE MARKING
I.S. EN 13523-9:2014 COIL COATED METALS - TEST METHODS - PART 9: RESISTANCE TO WATER IMMERSION
I.S. EN 13523-0:2014 COIL COATED METALS - TEST METHODS - PART 0: GENERAL INTRODUCTION
EN 13523-3:2014 Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
16/30340560 DC : 0 BS EN 13523-8 - COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG)
07/30168407 DC : DRAFT DEC 2007 BS EN 508-2 - ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM
12/30268964 DC : 0 BS EN 13523-9 - COIL COATED METALS - TEST METHODS - PART 9: RESISTANCE TO WATER IMMERSION
PREN 14782 : DRAFT 2015 SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
DIN EN 13523-21:2016-07 (Draft) COIL COATED METALS - TEST METHODS - PART 21: EVALUATION OF OUTDOOR EXPOSED PANELS
DIN EN 1090-5 E : 2017 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
07/30165574 DC : DRAFT DEC 2007 BS EN 13523-27 - COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTRICE (CATAPLASM TEST)
PD ISO/TS 16688:2017 Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications
UNI EN 13523-17 : 2012 COIL COATED METALS - TEST METHODS - PART 17: ADHESION OF STRIPPABLE FILMS
15/30329707 DC : 0 BS EN 13523-22 - COIL COATED METALS - TEST METHODS - PART 22: COLOUR DIFFERENCE - VISUAL COMPARISON
DIN EN 13523-27:2015-12 (Draft) COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST)
08/30186451 DC : DRAFT OCT 2008 BS EN 573-3 - ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 3: CHEMICAL COMPOSITION AND FORM OF PRODUCTS
DIN EN 13523-24:2016-07 (Draft) COIL COATED METALS - TEST METHODS - PART 24: RESISTANCE TO BLOCKING AND PRESSURE MARKING
BS EN 14509:2013 Self-supporting double skin metal faced insulating panels. Factory made products. Specifications
PREN 13523-24 : DRAFT 2016 COIL COATED METALS - TEST METHODS - PART 24: RESISTANCE TO BLOCKING AND PRESSURE MARKING
PREN 507 : DRAFT 2017 ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED PRODUCTS OF ALUMINIUM SHEET
CEN/TR 16239:2011 Installation rules of fibrous (gypsum) plaster works
UNI EN 16074 : 2011 PAINTS AND VARNISHES - DETERMINATION OF NON-VOLATILE-MATTER CONTENT AND SPREADING RATE OF COIL COATING MATERIALS
PREN 13523-23 : DRAFT 2014 COIL COATED METALS - TEST METHODS - PART 23: RESISTANCE TO HUMID ATMOSPHERES CONTAINING SULFUR DIOXIDE
I.S. EN 13523-11:2011 COIL COATED METALS - TEST METHODS - PART 11: RESISTANCE TO SOLVENTS (RUBBING TEST)
PREN 14509 : DRAFT 2013 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
PREN 13523-1 : DRAFT 2015 COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS
BS EN 13523-27:2017 Coil coated metals. Test methods Resistance to humid poultice (Cataplasm test)
PREN 13523-5 : DRAFT 2012 COIL COATED METALS - TEST METHODS - PART 5: RESISTANCE TO RAPID DEFORMATION (IMPACT TEST)
UNI EN 1999-1-4 : 2011 EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING
I.S. EN 14509:2013 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
DIN EN 573-5:2007-11 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products
DIN EN 13523-12:2015-12 (Draft) COIL COATED METALS - TEST METHODS - PART 12: RESISTANCE TO SCRATCHING
DIN EN 13523-19:2011-09 COIL COATED METALS - TEST METHODS - PART 19: PANEL DESIGN AND METHOD OF ATMOSPHERIC EXPOSURE TESTING
DIN EN 573-3:2013-12 ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 3: CHEMICAL COMPOSITION AND FORM OF PRODUCTS
DIN EN 13523-14:2014-08 Coil coated metals - Test methods - Part 14: Chalking (Helmen method)
DIN EN 612:2005-04 Eaves gutters with bead stiffened fronts and rainwater pipes with seamed joints made of metal sheet
DIN EN 13523-0:2014-08 Coil coated metals - Test methods - Part 0: General introduction
DIN EN 13523-2:2014-08 Coil coated metals - Test methods - Part 2: Gloss
DIN EN 13523-3:2014-08 Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
DIN EN 14782 E : 2006 SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
DIN EN 13964:2014-08 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
UNE-EN 14509:2014 Self-supporting double skin metal faced insulating panels - Factory made products - Specifications
BS EN 612:2005 Eaves gutters with bead stiffened fronts and rainwater pipes with seamed joints made of metal sheet
BS EN 13523-15:2015 Coil coated metals. Test methods Metamerism
UNE-EN 13523-10:2017 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
UNE-EN 13523-4:2014 Coil coated metals - Test methods - Part 4: Pencil hardness
UNE-EN 13523-3:2014 Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
UNE-EN 13523-19:2011 Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing
I.S. EN 13523-6:2002 COIL COATED METALS - TEST METHODS - PART 6: ADHESION AFTER INDENTATION (CUPPING TEST)
UNE-EN 13523-17:2012 Coil coated metals - Test methods - Part 17: Adhesion of strippable films
I.S. EN 13523-18:2002 COIL COATED METALS - TEST METHODS - PART 18: RESISTANCE TO STAINING
UNI EN 13523-20 : 2012 COIL COATED METALS - TEST METHODS - PART 20: FOAM ADHESION
EN 13523-6:2002 Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test)
I.S. EN 13523-20:2011 COIL COATED METALS - TEST METHODS - PART 20: FOAM ADHESION
EN 13523-18:2002 Coil coated metals - Test methods - Part 18: Resistance to staining
EN 485-1:2016 Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery
EN 13964:2014 Suspended ceilings - Requirements and test methods
UNI EN 14509 : 2013 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
UNI EN 573-3 : 2013 ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 3: CHEMICAL COMPOSITION AND FORM OF PRODUCTS
UNI EN 13523-4 : 2014 COIL COATED METALS - TEST METHODS - PART 4: PENCIL HARDNESS
UNI EN 13523-14 : 2014 COIL COATED METALS - TEST METHODS - PART 14: CHALKING (HELMEN METHOD)
UNI EN 13523-13 : 2014 COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT
UNI EN 13964 : 2014 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
UNI EN 13523-5 : 2014 COIL COATED METALS - TEST METHODS - PART 5: RESISTANCE TO RAPID DEFORMATION (IMPACT TEST)
UNI EN 508-2 : 2008 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM
03/309844 DC : DRAFT JUNE 2003 EN 13523-11 - COIL COATED METALS - TEST METHODS - PART 11: RESISTANCE TO SOLVENTS (RUBBING TEST)
08/30188879 DC : DRAFT DEC 2008 BS EN 13523-8 - COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG)
14/30266796 DC : 0 BS EN ISO 1514 - PAINTS AND VARNISHES - STANDARD PANELS FOR TESTING
15/30329704 DC : 0 BS EN 13523-10 - COIL COATED METALS - TEST METHODS - PART 10: RESISTANCE TO FLUORESCENT UV RADIATION AND WATER CONDENSATION
08/30173308 DC : DRAFT MAY 2008 BS EN 13523-1 - COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS
DIN EN 14509 E : 2013 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
14/30291747 DC : 0 BS EN 13523-15 - COIL COATED METALS - TEST METHODS - PART 15: METAMERISM
ONORM EN 508-2 : 2008 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM
PREN 13523-12 : DRAFT 2015 COIL COATED METALS - TEST METHODS - PART 12: RESISTANCE TO SCRATCHING
PREN 13523-9 : DRAFT 2012 COIL COATED METALS - TEST METHODS - PART 9: RESISTANCE TO WATER IMMERSION
17/30348949 DC : 0 BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
I.S. EN 13523-19:2011 COIL COATED METALS - TEST METHODS - PART 19: PANEL DESIGN AND METHOD OF ATMOSPHERIC EXPOSURE TESTING
UNI EN 13523-11 : 2011 COIL COATED METALS - TEST METHODS - PART 11: RESISTANCE TO SOLVENTS (RUBBING TEST)
DIN EN 13523-13:2014-08 COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT
DIN EN 13523-23:2015-09 Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide
DIN EN 13523-25:2014-08 Coil coated metals - Test methods - Part 25: Resistance to humidity
DIN EN 13523-7:2014-08 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
DIN EN 485-1:2016-10 ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
DIN EN 13523-5:2014-08 Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test)
DIN EN 13523-1:2015-12 (Draft) COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS
DIN EN 13523-9:2014-08 Coil coated metals - Test methods - Part 9: Resistance to water immersion
BS EN 13523-5:2014 Coil coated metals. Test methods Resistance to rapid deformation (impact test)
BS EN 13523-12:2017 Coil coated metals. Test methods Resistance to scratching
BS EN 13523-6:2002 Coil coated metals. Test methods Adhesion after indentation (cupping test)
BS EN 13523-22:2017 Coil coated metals. Test methods Colour difference. Visual comparison
BS EN 485-1 : 2008 ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
UNE-EN ISO 1514:2017 Paints and varnishes - Standard panels for testing (ISO 1514:2016)
BS EN 13523-25:2014 Coil coated metals. Test methods Resistance to humidity
UNE-EN 13523-9:2014 Coil coated metals - Test methods - Part 9: Resistance to water immersion
UNE-EN 508-2:2010 Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium
UNE-EN 16074:2011 Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials
BS EN 13523-21:2017 Coil coated metals. Test methods Evaluation of outdoor exposed panels
BS EN 508-2:2008 Roofing products from metal sheet. Specification for self supporting products of steel, aluminium or stainless steel sheet Aluminium
UNE-EN 13523-21:2017 Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels
BS EN 13523-3:2014 Coil coated metals. Test methods Colour difference. Instrumental comparison
DIN EN 15088:2016-09 (Draft) Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery; German and English version prEN 15088:2016
BS EN 573-3:2013 Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical composition and form of products
UNE-EN 13523-24:2017 Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking
BS EN 13523-17:2011 Coil coated metals. Test methods Adhesion of strippable films
BS EN 15088:2005 Aluminium and aluminium alloys. Structural products for construction works. Technical conditions for inspection and delivery
BS EN 13523-26:2014 Coil coated metals. Test methods Resistance to condensation of water
UNE-EN 13523-23:2015 Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide
UNE-EN 13523-12:2017 Coil coated metals - Test methods - Part 12: Resistance to scratching
UNE-EN 13523-20:2012 Coil coated metals - Test methods - Part 20: Foam adhesion
UNE-EN 13523-1:2017 Coil coated metals - Test methods - Part 1: Film thickness
UNE-EN 485-1:2017 Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery
UNE-EN 13523-8:2017 Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)
DIN EN 13523-27:2009-10 COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST)
UNI EN 13523-26 : 2014 COIL COATED METALS - TEST METHODS - PART 26: RESISTANCE TO CONDENSATION OF WATER
EN 508-2:2008 Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium
EN 15088:2005 Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery
EN 612:2005 Eaves gutters with bead stiffened fronts and rainwater pipes with seamed joints made of metal sheet
UNI EN 13523-9 : 2014 COIL COATED METALS - TEST METHODS - PART 9: RESISTANCE TO WATER IMMERSION
EN 14509:2013 Self-supporting double skin metal faced insulating panels - Factory made products - Specifications
UNI EN 13523-25 : 2014 COIL COATED METALS - TEST METHODS - PART 25: RESISTANCE TO HUMIDITY
EN 507:1999 Roofing products from metal sheet - Specification for fully supported roofing products of aluminium sheet
EN ISO 1514:2016 Paints and varnishes - Standard panels for testing (ISO 1514:2016)
EN 14782:2006 Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements
EN 573-5:2007 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products
EN 16074:2011 Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials
EN 13523-21:2017 Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels
PD CEN/TR 16239:2011 Installation rules of fibrous (gypsum) plaster works
PREN 13523-2 : DRAFT 2012 COIL COATED METALS - TEST METHODS - PART 2: GLOSS
16/30340563 DC : 0 BS EN 13523-24 - COIL COATED METALS - TEST METHODS - PART 24: RESISTANCE TO BLOCKING AND PRESSURE MARKING
12/30268961 DC : 0 BS EN 13523-7 - COIL COATED METALS - TEST METHODS - PART 7: RESISTANCE TO CRACKING ON BENDING (T-BEND TEST)
12/30268973 DC : 0 BS EN 13523-2 - COIL COATED METALS - TEST METHODS - PART 2: GLOSS
DIN EN 13523-8:2016-07 (Draft) COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG)
15/30329713 DC : 0 BS EN 13523-12 - COIL COATED METALS - TEST METHODS - PART 12: RESISTANCE TO SCRATCHING
03/309847 DC : DRAFT JUNE 2003 EN 13523-17 - COIL COATED METALS - TEST METHODS - PART 17: ADHESION OF STRIPPABLE FILMS
12/30268979 DC : 0 BS EN 13523-26 - COIL COATED METALS - TEST METHODS - PART 26: RESISTANCE TO CONDENSATION OF WATER
BS EN 1999-1-4 : 2007 EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING
10/30228227 DC : 0 BS EN 13523-20 - COIL COATED METALS - TEST METHODS - PART 20: FOAM ADHESION
13/30217369 DC : 0 BS EN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
12/30268982 DC : 0 BS EN 13523-13 - COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT
04/30125694 DC : DRAFT NOV 2004 EN 15088 - ALUMINIUM AND ALUMINIUM ALLOYS - STRUCTURAL PRODUCTS FOR CONSTRUCTION WORKS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
16/30340557 DC : 0 BS EN 13523-21 - COIL COATED METALS - TEST METHODS - PART 21: EVALUATION OF OUTDOOR EXPOSED PANELS
ISO/TS 16688:2017 Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications
I.S. EN 13523-4:2014 COIL COATED METALS - TEST METHODS - PART 4: PENCIL HARDNESS
DIN EN 16074:2011-09 PAINTS AND VARNISHES - DETERMINATION OF NON-VOLATILE-MATTER CONTENT AND SPREADING RATE OF COIL COATING MATERIALS
PREN 13964 : DRAFT 2013 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
PREN 13523-29 : DRAFT 2015 COIL COATED METALS - TEST METHODS - PART 29: RESISTANCE TO ENVIRONMENTAL SOILING (DIRT PICK-UP AND STRIPING)
I.S. EN 13523-17:2011 COIL COATED METALS - TEST METHODS - PART 17: ADHESION OF STRIPPABLE FILMS
BS EN 13523-19:2011 Coil coated metals. Test methods Panel design and method of atmospheric exposure testing
17/30356149 DC : 0 BS EN 508-2 - ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM
17/30360664 DC : 0 BS EN 507 - ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED PRODUCTS OF ALUMINIUM SHEET
I.S. EN 1090-5:2017 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
PREN 13523-27 : DRAFT 2015 COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST)
DIN EN 13523-20:2012-02 COIL COATED METALS - TEST METHODS - PART 20: FOAM ADHESION
EN 1999-1-4:2007/A1:2011 EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING
UNE-EN 13964:2016 Suspended ceilings - Requirements and test methods
UNE-EN 13523-22:2017 Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison
BS EN 13523-9:2014 Coil coated metals. Test methods Resistance to water immersion
BS EN 13523-14:2014 Coil coated metals. Test methods Chalking (Helmen method)
BS EN 507:2000 Roofing products from metal sheet. Specification for fully supported roofing products of aluminium sheet
BS EN 13523-7:2014 Coil coated metals. Test methods Resistance to cracking on bending (T-bend test)
UNE-EN 13523-15:2015 Coil coated metals - Test methods - Part 15: Metamerism
BS EN 13523-0:2014 Coil coated metals. Test methods General introduction
BS EN 13523-10:2017 Coil coated metals. Test methods Resistance to fluorescent UV radiation and water condensation
BS EN 573-5:2007 Aluminium and aluminium alloys. Chemical composition and form of wrought products Codification of standardized wrought products
BS EN 13523-23:2015 Coil coated metals. Test methods Resistance to humid atmospheres containing sulfur dioxide
ISO 1514:2016 Paints and varnishes — Standard panels for testing
EN 13523-27:2017 Coil coated metals - Test methods - Part 27: Resistance to humid poultice (Cataplasm test)
EN 13523-7:2014 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
EN 13523-2:2014 Coil coated metals - Test methods - Part 2: Gloss
EN 13523-1:2017 Coil coated metals - Test methods - Part 1: Film thickness
EN 1090-5:2017 Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications
EN 13523-16:2004 Coil coated metals - Test methods - Part 16: Resistance to abrasion
EN 13523-22:2017 Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison
EN 13523-19:2011 Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing
EN 13523-15:2015 Coil coated metals - Test methods - Part 15: Metamerism
UNI EN 13523-2 : 2014 COIL COATED METALS - TEST METHODS - PART 2: GLOSS
UNI EN 13523-7 : 2014 COIL COATED METALS - TEST METHODS - PART 7: RESISTANCE TO CRACKING ON BENDING (T-BEND TEST)
EN 13523-25:2014 Coil coated metals - Test methods - Part 25: Resistance to humidity
DIN EN 13523-29:2017-05 COIL COATED METALS - TEST METHODS - PART 29: RESISTANCE TO ENVIRONMENTAL SOILING (DIRT PICK-UP AND STRIPING)
DIN EN 15088:2006-03 Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery; German version EN 15088:2005
UNI EN 13523-0 : 2014 COIL COATED METALS - TEST METHODS - PART 0: GENERAL INTRODUCTION
DIN EN 13523-10:2017-05 COIL COATED METALS - TEST METHODS - PART 10: RESISTANCE TO FLUORESCENT UV RADIATION AND WATER CONDENSATION
EN 13523-10:2017 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation

EN ISO 4628-2:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016)
EN 485-1:2016 Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery
ISO 6272-2:2011 Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 2: Falling-weight test, small-area indenter
EN 13523-10:2017 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
EN ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
EN ISO 1043-1:2011/A1:2016 PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016)
EN 13523-6:2002 Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test)
ISO 4623-2:2016 Paints and varnishes Determination of resistance to filiform corrosion Part 2: Aluminium substrates
ISO 6270-1:1998 Paints and varnishes Determination of resistance to humidity Part 1: Continuous condensation
EN 485-4:1993 Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products
ASTM D 660 : 1993 Standard Test Method for Evaluating Degree of Checking of Exterior Paints
ISO 1520:2006 Paints and varnishes Cupping test
ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
EN 13523-3:2014 Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
EN ISO 7253 : 2001 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG)
EN ISO 4628-4:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016)
EN 13523-21:2017 Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels
ISO 4628-4:2016 Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 4: Assessment of degree of cracking
EN 12258-1:2012 Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms
ISO 7253:1996 Paints and varnishes — Determination of resistance to neutral salt spray (fog)
EN 13523-22:2017 Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison
ISO 4628-5:2016 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking
EN 541:2006 Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications
EN ISO 4628-6:2011 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2011)
EN 3665 : 1997 AEROSPACE SERIES - TEST METHODS FOR PAINTS AND VARNISHES - FILIFORM CORROSION RESISTANCE TEST ON ALUMINIUM ALLOYS
EN 515:2017 Aluminium and aluminium alloys - Wrought products - Temper designations
EN ISO 1520:2006 Paints and varnishes - Cupping test (ISO 1520:2006)
EN 13523-19:2011 Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing
EN 13523-8:2017 Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)
ISO 6272-1:2011 Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter
EN 13523-7:2014 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
EN 13523-1:2017 Coil coated metals - Test methods - Part 1: Film thickness
ISO 4628-6:2011 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method
ISO 1519:2011 Paints and varnishes Bend test (cylindrical mandrel)
EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
EN ISO 1519:2011 Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011)
EN ISO 4628-5:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016)
EN 13523-4:2014 Coil coated metals - Test methods - Part 4: Pencil hardness
EN 13523-2:2014 Coil coated metals - Test methods - Part 2: Gloss
ISO 1043-1:2011 Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
EN 573-3:2013 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011)
ISO 4628-2:2016 Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.