ISO 11119-2:2012
Withdrawn
Withdrawn
View Superseded by
Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners
Amended by
Available format(s)
Hardcopy , PDF
Published date
07-13-2012
Withdrawn date
04-09-2025
Superseded by
US$96.00
Excluding Tax where applicable
ISO 11119-2:2012 specifies requirements for composite gas cylinders and tubes between 0,5 l and 450 l water capacity, for the storage and conveyance of compressed or liquefied gases.
ISO 11119-2:2012 applies to type 3 fully wrapped cylinders or tubes with a load-sharing metal liner and composite reinforcement on both the cylindrical portion and the dome ends.
ISO 11119-2:2012 is limited to cylinders and tubes with composite reinforcement of carbon fibre, aramid fibre or glass fibre (or a mixture thereof) within a matrix.
Cylinders complying with ISO 11119-2:2012 have a minimum design life of 15 years.
ISO 11119-2:2012 does not address the design, fitting, and performance of removable protective sleeves.
ISO 11119-2:2012 does not apply to cylinders with welded liners.
| Committee |
ISO/TC 58/SC 3
|
| DevelopmentNote |
Supersedes ISO/FDIS 11119-2. (07/2012)
|
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NEN ISO 11119-2 : 2012 AMD 1 2014 | Identical |
| NEN ISO 11119-2 : 2012 | Identical |
| SS-ISO 11119-2:2012 | Identical |
| ISO 16923:2016 | Natural gas fuelling stations — CNG stations for fuelling vehicles |
| BS EN ISO 11623:2015 | Gas cylinders. Composite construction. Periodic inspection and testing |
| ISO 13341:2010 | Gas cylinders — Fitting of valves to gas cylinders |
| I.S. EN ISO 11623:2015 | GAS CYLINDERS - COMPOSITE CONSTRUCTION - PERIODIC INSPECTION AND TESTING (ISO 11623:2015, CORRECTED VERSION 2017-02) |
| 17/30341479 DC : 0 | BS ISO 16111 - TRANSPORTABLE GAS STORAGE DEVICES - HYDROGEN ABSORBED IN REVERSIBLE METAL HYDRIDE |
| PD ISO/TR 19811:2017 | Gas cylinders. Service life testing for cylinders and tubes of composite construction |
| 08/30149718 DC : DRAFT JULY 2008 | BS EN ISO 13341 - TRANSPORTABLE GAS CYLINDERS - FITTING OF VALVES TO GAS CYLINDERS |
| BS EN ISO 13341 : 2010 | GAS CYLINDERS - FITTING OF VALVES TO GAS CYLINDERS |
| I.S. EN ISO 13341:2010 | GAS CYLINDERS - FITTING OF VALVES TO GAS CYLINDERS (ISO 13341:2010) |
| BS EN ISO 16923:2018 | Natural gas fuelling stations. CNG stations for fuelling vehicles |
| ISO/TR 19811:2017 | Gas cylinders — Service life testing for cylinders and tubes of composite construction |
| ISO 16111:2008 | Transportable gas storage devices — Hydrogen absorbed in reversible metal hydride |
| ISO 22734-2:2011 | Hydrogen generators using water electrolysis process — Part 2: Residential applications |
| 09/30150663 DC : 0 | BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS |
| BS ISO 22734-2:2011 | Hydrogen generators using water electrolysis process Residential applications |
| EN ISO 16923:2018 | Natural gas fuelling stations - CNG stations for fuelling vehicles (ISO 16923:2016) |
| EN ISO 11623:2015 | Gas cylinders - Composite construction - Periodic inspection and testing (ISO 11623:2015, Corrected version 2017-02) |
| BS ISO 16111:2008 | Transportable gas storage devices. Hydrogen absorbed in reversible metal hydride |
| 07/30148170 DC : 0 | BS ISO 16111 - TRANSPORTABLE GAS STORAGE DEVICES - HYDROGEN ABSORBED IN REVERSIBLE METAL HYDRIDE |
| ISO/TS 16111:2006 | Transportable gas storage devices — Hydrogen absorbed in reversible metal hydride |
| BS ISO 16923 : 2016 | NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES |
| I.S. EN ISO 16923:2018 | NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES (ISO 16923:2016) |
| DIN EN ISO 13341:2015-11 | Gas cylinders - Fitting of valves to gas cylinders (ISO 13341:2010 + Amd 1:2015) (includes Amendment :2015) |
| BS ISO 22734-1:2008 | Hydrogen generators using water electrolysis process Industrial and commercial applications |
| ISO 22734-1:2008 | Hydrogen generators using water electrolysis process — Part 1: Industrial and commercial applications |
| ISO 11623:2015 | Gas cylinders — Composite construction — Periodic inspection and testing |
| UNE-ISO 22734-1:2012 | Hydrogen generators using water electrolysis process. Part 1: Industrial and commercial applications |
| UNE-EN ISO 13341:2011 | Gas cylinders - Fitting of valves to gas cylinders (ISO 13341:2010) |
| UNE-EN ISO 11623:2016 | Gas cylinders - Composite construction - Periodic inspection and testing (ISO 11623:2015, Corrected version 2017-02) |
| ASME STP-PT-005 : 2006 | DESIGN FACTOR GUIDELINES FOR HIGH-PRESSURE COMPOSITE HYDROGEN TANKS |
| ISO 7225:2005 | Gas cylinders — Precautionary labels |
| AS 2337.3:2020 | Gas cylinder test stations Transportable gas cylinders - Periodic inspection and testing of composite cylinders (ISO 11623:2015, MOD) |
| ISO 6506-1:2014 | Metallic materials — Brinell hardness test — Part 1: Test method |
| CGA C 14 : 2005(R2010) | PROCEDURES FOR FIRE TESTING OF DOT CYLINDER PRESSURE RELIEF DEVICE SYSTEMS |
| ISO 11114-1:2012 | Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 1: Metallic materials |
| ISO 9809-3:2010 | Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 3: Normalized steel cylinders |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 6892-1:2016 | Metallic materials — Tensile testing — Part 1: Method of test at room temperature |
| EN 1964-3:2000 | Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres - Part 3: Cylinders made of seamless stainless steel with an Rm value of less than 1100 MPa |
| ISO 3341:2000 | Textile glass — Yarns — Determination of breaking force and breaking elongation |
| ISO 13341:2010 | Gas cylinders — Fitting of valves to gas cylinders |
| CGA C 6.2 : 2013 | STANDARD FOR VISUAL INSPECTION AND REQUALIFICATION OF FIBER REINFORCED HIGH PRESSURE CYLINDERS |
| ISO 7866:2012 | Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing |
| ISO 10618:2004 | Carbon fibre — Determination of tensile properties of resin-impregnated yarn |
| ISO 7438:2016 | Metallic materials — Bend test |
| EN 3-7:2004+A1:2007 | Portable fire extinguishers - Part 7: Characteristics, performance requirements and test methods |
| ISO 11114-2:2013 | Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 2: Non-metallic materials |
| ISO 11623:2015 | Gas cylinders — Composite construction — Periodic inspection and testing |
| ISO 10156:2017 | Gas cylinders — Gases and gas mixtures — Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets |
| ISO 9809-2:2010 | Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa |
| ASTM D 2290 : 2016-12 | TEST METHOD FOR APPARENT HOOP TENSILE STRENGTH OF PLASTIC OR REINFORCED PLASTIC PIPE |
| ISO 14130:1997 | Fibre-reinforced plastic composites — Determination of apparent interlaminar shear strength by short-beam method |
| ISO 9809-1:2010 | Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa |
| ISO 11117:2008 | Gas cylinders — Valve protection caps and valve guards — Design, construction and tests |
| ISO 13769:2007 | Gas cylinders — Stamp marking |
| ISO 11439:2013 | Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
Summarise
US$96.00
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.