ISO 11484:2009
Withdrawn
Withdrawn
View Superseded by
Steel products — Employer's qualification system for non-destructive testing (NDT) personnel
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
02-12-2009
Withdrawn date
04-09-2025
Superseded by
US$96.00
Excluding Tax where applicable
ISO 11484:2009 describes an employer's qualification system for non-destructive testing (NDT) personnel performing the inspection of the following steel products under the employer's responsibility:
- tubes/pipes (seamless or welded);
- flat products, long products, rails, bars, sections, rod, wire.
| Committee |
ISO/TC 17/SC 19
|
| DevelopmentNote |
DRAFT ISO/DIS 11484 is also available for this standard. (05/2018)
|
| DocumentType |
Standard
|
| Pages |
15
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| GOST R ISO 11484 : 2014 | Identical |
| BS ISO 11484:2009 | Identical |
| DIN EN ISO 10893-4:2011-07 | Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections (ISO 10893-4:2011) |
| BS EN ISO 10893-1:2011 | Non-destructive testing of steel tubes Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness |
| API 7G-2:2009 | RECOMMENDED PRACTICE FOR INSPECTION AND CLASSIFICATION OF USED DRILL STEM ELEMENTS |
| ISO 13665:1997 | Seamless and welded steel tubes for pressure purposes — Magnetic particle inspection of the tube body for the detection of surface imperfections |
| BS EN ISO 10893-5:2011 | Non-destructive testing of steel tubes Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections |
| NF EN ISO 10893-9 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 9: AUTOMATED ULTRASONIC TESTING FOR THE DETECTION OF LAMINAR IMPERFECTIONS IN STRIP/PLATE USED FOR THE MANUFACTURE OF WELDED STEEL TUBES |
| API 5L REDLINE : 2007 | SPECIFICATION FOR LINE PIPE |
| API 5DP CHINESE : 2009 | SPECIFICATION FOR DRILL PIPE |
| DIN EN ISO 10893-2:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 2: AUTOMATED EDDY CURRENT TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| 09/30166464 DC : 0 | BS ISO 10893-3 - NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 3: AUTOMATIC FULL PERIPHERAL FLUX LEAKAGE TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) FERROMAGNETIC STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSAL IMPERFECTIONS |
| BS EN ISO 10893-4:2011 | Non-destructive testing of steel tubes Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections |
| DIN EN ISO 10893-9:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 9: AUTOMATED ULTRASONIC TESTING FOR THE DETECTION OF LAMINAR IMPERFECTIONS IN STRIP/PLATE USED FOR THE MANUFACTURE OF WELDED STEEL TUBES |
| 06/30125917 DC : DRAFT JUN 2006 | ISO 10407-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - ROTARY DRILLING EQUIPMENT - PART 2: INSPECTION AND CLASSIFICATION OF DRILL STEM ELEMENTS |
| 15/30325000 DC : 0 | BS EN 10305-5 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES |
| BS ISO 17577:2006 | Steel. Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm |
| 17/30361645 DC : DRAFT SEP 2017 | BS EN ISO 11961 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
| 09/30166473 DC : 0 | BS ISO 10893-6 - NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 6: RADIOGRAPHIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| PREN 10225-4 : DRAFT 2017 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
| 06/30159843 DC : 0 | BS ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION - RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
| 09/30166488 DC : 0 | BS ISO 10893-11 - NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 11: AUTOMATED ULTRASONIC TESTING OF WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSAL IMPERFECTIONS |
| 08/30190263 DC : DRAFT SEP 2008 | BS EN ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
| API 5CRA CHINESE : 2011 | SPECIFICATION FOR CORROSION RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
| PREN 10208-3 : DRAFT 1997 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| DIN EN ISO 10893-3:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 3: AUTOMATED FULL PERIPHERAL FLUX LEAKAGE TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) FERROMAGNETIC STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
| API 5A5 : 2005 INC ERR 1:2009 (R2015) | FIELD INSPECTION OF NEW CASING, TUBING, AND PLAIN-END DRILL PIPE |
| ISO 13663:1995 | Welded steel tubes for pressure purposes — Ultrasonic testing of the area adjacent to the weld seam for the detection of laminar imperfections |
| API 5CRA : 2010 : INC : ERR 1 : 2011 | SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
| ISO 12094:1994 | Welded steel tubes for pressure purposes — Ultrasonic testing for the detection of laminar imperfections in strips/plates used in the manufacture of welded tubes |
| EN ISO 10893-6:2011 | Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2011) |
| NF EN ISO 10893-6 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 6: RADIOGRAPHIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| NF EN ISO 10893-7 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 7: DIGITAL RADIOGRAPHIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| I.S. EN ISO 10893-4:2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 4: LIQUID PENETRANT INSPECTION OF SEAMLESS AND WELDED STEEL TUBES FOR THE DETECTION OF SURFACE IMPERFECTIONS |
| NF EN ISO 10893-10 : 2011 | NON DESTRUCTIVE TESTING OF STEEL TUBES - PART 10: AUTOMATED FULL PERIPHERAL ULTRASONIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSAL IMPERFECTIONS |
| I.S. EN 10216-2:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| BS EN 10216-2:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified elevated temperature properties |
| ISO 10893-1:2011 | Non-destructive testing of steel tubes — Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness |
| BS EN 10305-2:2016 | Steel tubes for precision applications. Technical delivery conditions Welded cold drawn tubes |
| BS EN ISO 11960:2014 | Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells |
| ISO 10893-2:2011 | Non-destructive testing of steel tubes — Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections |
| DIN EN 10305-1:2016-08 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES |
| I.S. EN 10305-2:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES |
| I.S. EN ISO 15463:2004 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIELD INSPECTION OF NEW CASING, TUBING AND PLAIN-END DRILL PIPE |
| I.S. EN 10216-4:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| DIN EN ISO 10893-6:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 6: RADIOGRAPHIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| EN 10305-3:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
| EN 10216-1:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
| EN 10305-5:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes |
| EN 10305-2:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes |
| EN ISO 10893-5:2011 | Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections (ISO 10893-5:2011) |
| EN 10305-6:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
| DIN EN ISO 10893-11:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 11: AUTOMATED ULTRASONIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
| BIS IS/ISO 3183 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| DIN EN ISO 10893-5:2011-07 | Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections (ISO 10893-5:2011); German version EN ISO 10893-5:2011 |
| EN 10217-7:2014 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| API 5A5 : 2005 INC ERR 1:2009 (R2010) | FIELD INSPECTION OF NEW CASING, TUBING, AND PLAIN-END DRILL PIPE |
| DIN EN ISO 10893-1:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 1: AUTOMATED ELECTROMAGNETIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE VERIFICATION OF HYDRAULIC LEAKTIGHTNESS |
| 09/30166482 DC : 0 | BS ISO 10893-9 - NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 9: AUTOMATED ULTRASONIC TESTING FOR THE DETECTION OF LAMINAR IMPERFECTIONS IN STRIP/PLATE USED FOR THE MANUFACTURE OF WELDED STEEL TUBES |
| 09/30166485 DC : 0 | BS ISO 10893-10 - NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 10: AUTOMATIC FULL PERIPHERAL ULTRASONIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSAL IMPERFECTIONS |
| 14/30275134 DC : 0 | BS ISO 17577 - STEEL - ULTRASONIC TESTING FOR STEEL FLAT PRODUCTS OF THICKNESS EQUAL TO OR GREATER THAN 6 MM |
| API 5DP : 2010(R2015) | SPECIFICATION FOR DRILL PIPE |
| BS ISO 3183-3:1999 | Petroleum and natural gas industries. Steel pipe for pipelines. Technical delivery conditions Pipes of requirement class C |
| BS EN ISO 10893-11:2011 | Non-destructive testing of steel tubes Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections |
| I.S. EN ISO 3183:2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| DIN EN ISO 10893-8:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 8: AUTOMATED ULTRASONIC TESTING OF SEAMLESS AND WELDED STEEL TUBES FOR THE DETECTION OF LAMINAR IMPERFECTIONS |
| 05/30091555 DC : DRAFT MAY 2005 | ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) — General requirements |
| I.S. EN ISO 10893-7:2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 7: DIGITAL RADIOGRAPHIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| I.S. EN ISO 10893-9:2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 9: AUTOMATED ULTRASONIC TESTING FOR THE DETECTION OF LAMINAR IMPERFECTIONS IN STRIP/PLATE USED FOR THE MANUFACTURE OF WELDED STEEL TUBES |
| I.S. EN ISO 10893-6:2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 6: RADIOGRAPHIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| I.S. EN ISO 10893-8:2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 8: AUTOMATED ULTRASONIC TESTING OF SEAMLESS AND WELDED STEEL TUBES FOR THE DETECTION OF LAMINAR IMPERFECTIONS |
| ISO 3183:2012 | Petroleum and natural gas industries — Steel pipe for pipeline transportation systems |
| BS EN ISO 3183 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| ISO 12096:1996 | Submerged arc-welded steel tubes for pressure purposes — Radiographic testing of the weld seam for the detection of imperfections |
| 17/30346741 DC : 0 | BS EN 10225-1 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 1: PLATES |
| ONORM EN ISO 10893-6 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 6: RADIOGRAPHIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| DIN EN 10216-5:2014-03 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| DIN EN 10305-6:2016-08 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| DIN EN 10216-2:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| BS EN 10216-4:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified low temperature properties |
| DIN EN 10305-3:2016-08 | Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
| ISO 11960:2014 | Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells |
| I.S. EN 10305-5:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES |
| I.S. EN 10216-1:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| I.S. EN 10305-6:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| I.S. EN 10216-3:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| I.S. EN 10216-5:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES |
| I.S. EN 10217-7:2014 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
| I.S. EN ISO 11960:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
| I.S. EN 10305-4:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| I.S. EN 10305-1:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES |
| I.S. EN 10305-3:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDED COLD SIZED TUBES |
| DIN EN ISO 10893-7:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 7: DIGITAL RADIOGRAPHIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| 15/30324994 DC : 0 | BS EN 10305-3 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDED COLD SIZED TUBES |
| PREN 10305-5 : DRAFT 2015 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES |
| ISO 11496:1993 | Seamless and welded steel tubes for pressure purposes — Ultrasonic testing of tube ends for the detection of laminar imperfections |
| BS EN ISO 10893-6:2011 | Non-destructive testing of steel tubes Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections |
| DIN EN ISO 10893-12:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 12: AUTOMATED FULL PERIPHERAL ULTRASONIC THICKNESS TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES |
| 16/30332608 DC : DRAFT JAN 2016 | BS EN 10210-2 - HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS |
| 11/30235499 DC : 0 | BS EN ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| NF EN ISO 11961 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
| BS EN ISO 10893-2:2011 | Non-destructive testing of steel tubes Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections |
| 09/30166492 DC : 0 | BS ISO 10893-12 - NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 12: AUTOMATED FULL PERIPHERAL ULTRASONIC THICKNESS TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES |
| API 5CRA : 2010 : INC : ERR 1 : 2011 : R2015 | SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
| 17/30346735 DC : 0 | BS EN 10225-3 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 3: HOT FINISHED HOLLOW SECTIONS |
| 09/30166458 DC : 0 | BS ISO 10893-1 - NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 1: AUTOMATIC ELECTROMAGNETIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE VERIFICATION OF HYDRAULIC LEAK-TIGHTNESS IN SUBSTITUTION OF HYDROSTATIC TEST |
| BS EN ISO 10893-10:2011 | Non-destructive testing of steel tubes Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections |
| 09/30166479 DC : 0 | BS ISO 10893-8 - NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 8: AUTOMATED ULTRASONIC TESTING OF SEAMLESS AND WELDED STEEL TUBES FOR THE DETECTION OF LAMINAR IMPERFECTIONS |
| NF EN ISO 10893-8 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 8: AUTOMATED ULTRASONIC TESTING OF SEAMLESS AND WELDED STEEL TUBES FOR THE DETECTION OF LAMINAR IMPERFECTIONS |
| BS ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
| PREN 10305-6 : DRAFT 2015 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| PREN 10210-2 : DRAFT 2016 | HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS |
| I.S. EN ISO 10893-2:2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 2: AUTOMATED EDDY CURRENT TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| DIN EN ISO 3183:2013-03 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| BS EN ISO 10893-7:2011 | Non-destructive testing of steel tubes Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections |
| ISO 10893-6:2011 | Non-destructive testing of steel tubes — Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections |
| ISO 3183-3:1999 | Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 3: Pipes of requirement class C |
| DIN EN 10216-3:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| DIN EN ISO 11960:2014-05 | Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014); English version EN ISO 11960:2014, only on CD-ROM |
| DIN EN 10305-2:2016-08 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES |
| BS EN 10305-5:2010 | Steel tubes for precision applications. Technical delivery conditions Welded and cold sized square and rectangular tubes |
| BS EN 10217-7:2014 | Welded steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes |
| ISO 10893-9:2011 | Non-destructive testing of steel tubes — Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes |
| ISO 10893-11:2011 | Non-destructive testing of steel tubes — Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections |
| DIN EN 10305-5:2016-08 | Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes |
| ISO 10893-3:2011 | Non-destructive testing of steel tubes — Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections |
| EN ISO 10893-12:2011 | Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes (ISO 10893-12:2011) |
| EN ISO 10893-2:2011 | Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011) |
| EN ISO 10893-10:2011 | Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011) |
| EN ISO 10893-1:2011 | Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness (ISO 10893-1:2011) |
| EN ISO 10893-8:2011 | Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011) |
| EN ISO 13680:2010 | Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2010) |
| EN ISO 10893-9:2011 | Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes (ISO 10893-9:2011) |
| EN ISO 10893-11:2011 | Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-11:2011) |
| 03/301625 DC : DRAFT JAN 2003 | BS EN ISO 10424-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - ROTARY DRILLING EQUIPMENT - PART 1: SPECIFICATION FOR ROTARY DRILLING EQUIPMENT |
| I.S. EN ISO 10893-12:2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 12: AUTOMATED FULL PERIPHERAL ULTRASONIC THICKNESS TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES |
| NF EN ISO 10893-12 : 2011 | NON DESTRUCTIVE TESTING OF STEEL TUBES - PART 12: AUTOMATED FULL PERIPHERAL ULTRASONIC THICKNESS TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES |
| ISO 13664:1997 | Seamless and welded steel tubes for pressure purposes — Magnetic particle inspection of the tube ends for the detection of laminar imperfections |
| EN 10216-5:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| API 5A5 CHINESE : 2005 | FIELD INSPECTION OF NEW CASING, TUBING, AND PLAIN-END DRILL PIPE |
| 15/30325003 DC : 0 | BS EN 10305-2 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES |
| NF EN ISO 10893-2 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 2: AUTOMATED EDDY CURRENT TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| BS EN ISO 10893-3:2011 | Non-destructive testing of steel tubes Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections |
| BS ISO 10332:2010 | Non-destructive testing of steel tubes. Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness |
| 17/30346738 DC : 0 | BS EN 10225-2 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 2: SECTIONS |
| 09/30166470 DC : 0 | BS ISO 10893-5 - NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 5: MAGNETIC PARTICLE INSPECTION OF SEAMLESS AND WELDED FERROMAGNETIC STEEL TUBES FOR THE DETECTION OF SURFACE IMPERFECTIONS |
| 09/30167484 DC : 0 | BS ISO 10332 - NON-DESTRUCTIVE TESTING OF STEEL TUBES - AUTOMATED ULTRASONIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR VERIFICATION OF HYDRAULIC LEAK-TIGHTNESS AS A SUBSTITUTION FOR THE HYDRAULIC TEST |
| I.S. EN ISO 10893-3:2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 3: AUTOMATED FULL PERIPHERAL FLUX LEAKAGE TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) FERROMAGNETIC STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
| BS EN ISO 10893-8:2011 | Non-destructive testing of steel tubes Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections |
| 09/30166461 DC : 0 | BS ISO 10893-2 - NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 2: AUTOMATIC EDDY CURRENT TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| 15/30324991 DC : 0 | BS EN 10305-1 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES |
| NF EN ISO 10893-3 : 2011 | Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections |
| ISO 10543:1993 | Seamless and hot-stretch-reduced welded steel tubes for pressure purposes — Full peripheral ultrasonic thickness testing |
| 15/30324997 DC : 0 | BS EN 10305-4 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| I.S. EN ISO 10893-10:2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 10: AUTOMATED FULL PERIPHERAL ULTRASONIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
| BS EN ISO 10407-2:2008 | Petroleum and natural gas industries. Rotary drilling equipment Inspection and classification of used drill stem elements |
| API 5L RUSSIAN : 2012 | SPECIFICATION FOR LINE PIPE |
| API 5L CHINESE : 2012 | SPECIFICATION FOR LINE PIPE |
| API SPEC 5CRA : 2010 | SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
| ISO 17577:2016 | Steel — Ultrasonic testing of steel flat products of thickness equal to or greater than 6 mm |
| EN 10216-2:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
| EN ISO 10893-3:2011 | Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-3:2011) |
| ONORM EN ISO 3183 : 2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| DIN EN 10216-4:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| DIN EN 10217-7:2015-01 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| BS EN ISO 13680:2010 | Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions |
| ISO 13680:2010 | Petroleum and natural gas industries — Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock — Technical delivery conditions |
| BS EN 10216-5:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes |
| ISO 10893-12:2011 | Non-destructive testing of steel tubes — Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes |
| ISO 10893-5:2011 | Non-destructive testing of steel tubes — Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections |
| ISO 15463:2003 | Petroleum and natural gas industries — Field inspection of new casing, tubing and plain-end drill pipe |
| BS EN 10216-3:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes |
| BS EN 10305-6:2016 | Steel tubes for precision applications. Technical delivery conditions Welded cold drawn tubes for hydraulic and pneumatic power systems |
| BS EN 10305-3:2016 | Steel tubes for precision applications. Technical delivery conditions Welded cold sized tubes |
| ISO 10893-8:2011 | Non-destructive testing of steel tubes — Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections |
| BS EN 10305-1:2016 | Steel tubes for precision applications. Technical delivery conditions Seamless cold drawn tubes |
| ISO 10893-4:2011 | Non-destructive testing of steel tubes — Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections |
| BS EN ISO 15463:2003 | Petroleum and natural gas industries. Field inspection of new casing, tubing and plain-end drill pipe |
| API 7G-2 SPANISH : 2009 | RECOMMENDED PRACTICE FOR INSPECTION AND CLASSIFICATION OF USED DRILL STEM ELEMENTS |
| EN ISO 11960:2014 | Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014) |
| BS EN ISO 10893-12:2011 | Non-destructive testing of steel tubes Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes |
| API 7G-2 : 2009 | RECOMMENDED PRACTICE FOR INSPECTION AND CLASSIFICATION OF USED DRILL STEM ELEMENTS |
| BS EN ISO 10893-9:2011 | Non-destructive testing of steel tubes Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes |
| DIN EN ISO 10893-10:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 10: AUTOMATED FULL PERIPHERAL ULTRASONIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
| BS EN ISO 11961:2008 | Petroleum and natural gas industries. Steel drill pipe |
| NF EN ISO 10893-4 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 4: LIQUID PENETRANT INSPECTION OF SEAMLESS AND WELDED STEEL TUBES FOR THE DETECTION OF SURFACE IMPERFECTIONS |
| ISO 10332:2010 | Non-destructive testing of steel tubes — Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness |
| 09/30143423 DC : DRAFT MAY 2009 | BS EN ISO 11120 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN CONSTRUCTION AND TESTING |
| 15/30324988 DC : 0 | BS EN 10305-6 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| 09/30166476 DC : 0 | BS ISO 10893-7 - NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 7: DIGITAL RADIOGRAPHIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| 97/703009 DC : 0 | PREN 10208-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| 03/313799 DC : DRAFT AUG 2003 | ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
| NF EN ISO 10893-1 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 1: AUTOMATED ELECTROMAGNETIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE VERIFICATION OF HYDRAULIC LEAK TIGHTNESS |
| 03/314809 DC : DRAFT SEP 2003 | EN ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
| 09/30166467 DC : 0 | BS ISO 10893-4 - NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 4: LIQUID PENETRANT INSPECTION OF SEAMLESS AND WELDED STEEL TUBES FOR THE DETECTION OF SURFACE IMPERFECTIONS |
| PREN 10219-2 : DRAFT 2016 | COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS |
| API 7G-2 : 2009 : INC : ERR 1 : 2009 : R2015 | RECOMMENDED PRACTICE FOR INSPECTION AND CLASSIFICATION OF USED DRILL STEM ELEMENTS |
| API 5A5 : 2005 | FIELD INSPECTION OF NEW CASING, TUBING, AND PLAIN-END DRILL PIPE |
| I.S. EN ISO 10893-1:2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 1: AUTOMATED ELECTROMAGNETIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE VERIFICATION OF HYDRAULIC LEAKTIGHTNESS |
| I.S. EN ISO 10407-2:2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - ROTARY DRILLING EQUIPMENT - PART 2: INSPECTION AND CLASSIFICATION OF USED DRILL STEM ELEMENTS |
| ISO 10124:1994 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Ultrasonic testing for the detection of laminar imperfections |
| ISO 12095:1994 | Seamless and welded steel tubes for pressure purposes — Liquid penetrant testing |
| 17/30346732 DC : 0 | BS EN 10225-4 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
| 16/30332614 DC : 0 | BS EN 10219-2 - COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS |
| ONORM EN ISO 10893-7 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 7: DIGITAL RADIOGRAPHIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| I.S. EN ISO 11961:2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
| ISO 10893-7:2011 | Non-destructive testing of steel tubes — Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections |
| EN ISO 10893-7:2011 | Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2011) |
| ISO 3183-2:1996 | Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 2: Pipes of requirements class B |
| I.S. EN ISO 10893-11:2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 11: AUTOMATED ULTRASONIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
| I.S. EN ISO 10893-5:2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 5: MAGNETIC PARTICLE INSPECTION OF SEAMLESS AND WELDED FERROMAGNETIC STEEL TUBES FOR THE DETECTION OF SURFACE IMPERFECTIONS |
| DIN EN 10216-1:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| ISO 10893-10:2011 | Non-destructive testing of steel tubes — Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections |
| BS EN 10216-1:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties |
| BS EN 10305-4:2016 | Steel tubes for precision applications. Technical delivery conditions Seamless cold drawn tubes for hydraulic and pneumatic power systems |
| EN ISO 10893-4:2011 | Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections (ISO 10893-4:2011) |
| EN 10305-1:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes |
| EN 10216-3:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
| EN 10305-4:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
| DIN EN 10305-4:2016-08 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| UNE-EN ISO 10893-4:2011 | Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections (ISO 10893-4:2011) |
| UNE-EN ISO 10893-5:2011 | Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections (ISO 10893-5:2011) |
| API RP 5A5 RUSSIAN:2005/ERR:2009 (R2015) | Field Inspection of New Casing, Tubing, and Plain-end Drill Pipe, Seventh Edition, Includes Errata |
| UNE-EN 10305-2:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes |
| UNE-EN ISO 10893-3:2011 | Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-3:2011) |
| UNE-EN 10216-3:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
| UNE-EN ISO 10893-10:2011 | Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011) |
| UNE-EN 10216-1:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
| UNE-EN ISO 10893-11:2011 | Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-11:2011) |
| UNE-EN ISO 10893-7:2011 | Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2011) |
| UNE-EN ISO 10893-9:2011 | Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes (ISO 10893-9:2011) |
| UNE-EN ISO 10893-8:2011 | Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011) |
| UNE-EN 10305-6:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
| UNE-EN 10305-4:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
| UNE-EN 10305-3:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
| UNE-EN 10216-4:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties |
| UNE-EN 10305-5:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes |
| UNE-EN ISO 10893-12:2011 | Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes (ISO 10893-12:2011) |
| UNE-EN ISO 10893-1:2011 | Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness (ISO 10893-1:2011) |
| UNE-EN ISO 10893-6:2011 | Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2011) |
| UNE-EN 10216-2:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
| UNE-EN 10305-1:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes |
| UNE-EN 10216-5:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| UNE-EN ISO 10893-2:2011 | Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011) |
| ASNT SNT TC 1A : 2016 | TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
| ISO/TR 25108:2006 | Non-destructive testing — Guidelines for NDT personnel training organizations |
| ISO 9712:2012 | Non-destructive testing — Qualification and certification of NDT personnel |
| ISO/TR 25107:2006 | Non-destructive testing — Guidelines for NDT training syllabuses |
| ASNT CP 189 : 2016 | QUALIFICATION AND CERTIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
Summarise
US$96.00
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.