ISO 13680:2010
Withdrawn
Withdrawn
View Superseded by
Petroleum and natural gas industries — Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock — Technical delivery conditions
Available format(s)
Hardcopy , PDF
Language(s)
English, French
Published date
09-06-2010
Withdrawn date
04-09-2025
Superseded by
US$96.00
Excluding Tax where applicable
ISO 13680:2010 specifies the technical delivery conditions for corrosion-resistant alloy seamless tubulars for casing, tubing and coupling stock for two product specification levels: PSL-1, which is the basis of ISO 13680:2010; PSL-2, which provides additional requirements for a product that is intended to be both corrosion resistant and cracking resistant for the environments and qualification method specified in ISO 15156-3 and Annex G of ISO 13680:2010.
At the option of the manufacturer, PSL-2 products can be provided in lieu of PSL-1.
The corrosion-resistant alloys included in ISO 13680:2010 are special alloys in accordance with ISO 4948-1 and ISO 4948-2.
ISO 13680:2010 is applicable to the following four groups of product: group 1, which is composed of stainless alloys with a martensitic or martensitic/ferritic structure; group 2, which is composed of stainless alloys with a ferritic-austenitic structure, such as duplex and super-duplex stainless alloy; group 3, which is composed of stainless alloys with an austenitic structure (iron base); group 4, which is composed of nickel-based alloys with an austenitic structure (nickel base).
ISO 13680:2010 contains no provisions relating to the connection of individual lengths of pipe.
| Committee |
ISO/TC 67/SC 5
|
| DevelopmentNote |
Also numbered as API 5CRA. Supersedes ISO/DIS 13680. (09/2010) Also numbered as API 5CRA CHINESE. (02/2015)
|
| DocumentType |
Standard
|
| Pages |
89
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| GOST ISO 13680 : 2016 | Identical |
| NF EN ISO 13680 : 2013 | Identical |
| NBN EN ISO 13680 : 2010 | Identical |
| NEN EN ISO 13680 : 2010 | Identical |
| NS EN ISO 13680 : 1ED 2010 | Identical |
| PN EN ISO 13680 : 2012 | Identical |
| EN ISO 13680:2010 | Identical |
| DIN EN ISO 13680:2010-12 | Identical |
| I.S. EN ISO 13680:2010 | Equivalent |
| NS-EN ISO 13680:2025 | Identical |
| BS EN ISO 13680:2010 | Equivalent |
| DS EN ISO 13680 : 2010 | Identical |
| NEN ISO 13680 : 2000 | Identical |
| UNE-EN ISO 13680:2010 | Identical |
| GOST R ISO 13680 : 2011 | Identical |
| BS EN ISO 13680:2010 | Identical |
| NS ISO 13680 : 1ED 2000 | Identical |
| DIN EN ISO 15156-3:2015-12 | Petroleum and natural gas industries - Materials for use in HS-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2015) |
| BS EN ISO 17348:2016 | Petroleum and natural gas industries. Materials selection for high content CO<sub>2</sub> environment for casings, tubings and downhole equipment |
| BS ISO 13679 : 2002 AMD 16774 | PETROLEUM AND NATURAL GAS INDUSTRIES - PROCEDURES FOR TESTING CASING AND TUBING CONNECTIONS |
| I.S. EN ISO 17348:2016 | PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS SELECTION FOR HIGH CONTENT CO[2] ENVIRONMENT FOR CASINGS, TUBINGS AND DOWNHOLE EQUIPMENT (ISO 17348:2016) |
| CEN ISO/TS 16530-2:2015 | Well integrity - Part 2: Well integrity for the operational phase (ISO/TS 16530-2:2014) |
| 02/703231 DC : DRAFT FEB 2002 | BS EN ISO 15156-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H2S- CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS |
| API RP 13J : 2014 | TESTING OF HEAVY BRINES |
| BS EN ISO 21329:2004 | Petroleum and natural gas industries. Pipeline transportation systems. Test procedures for mechanical connectors |
| EN ISO 15156-3:2015 | Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2015) |
| ONORM EN ISO 13679 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - PROCEDURES FOR TESTING CASING AND TUBING CONNECTIONS (ISO 13679:2002) |
| 14/30304340 DC : 0 | BS EN ISO 17348 - PETROLEUM AND NATURAL GAS OFFSHORE PLATFORMS - GUIDELINES FOR MATERIALS SELECTION FOR HIGH CONTENT CO[2] ENVIRONMENT FOR CASINGS, TUBINGS AND DOWNHOLE EQUIPMENT |
| 09/30179533 DC : DRAFT MAY 2009 | BS EN ISO 13679 - PETROLEUM AND NATURAL GAS INDUSTRIES - PROCEDURES FOR TESTING CASING AND TUBING CONNECTIONS |
| S.R. CEN ISO/TS 16530-2:2015 | WELL INTEGRITY - PART 2: WELL INTEGRITY FOR THE OPERATIONAL PHASE (ISO/TS 16530-2:2014) |
| BS EN ISO 13679:2006 | Petroleum and natural gas industries. Procedures for testing casing and tubing connections |
| I.S. EN ISO 13679:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - PROCEDURES FOR TESTING CASING AND TUBING CONNECTIONS |
| BS EN ISO 15156-3:2015 | Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
| DIN CEN ISO/TS 16530-2;DIN SPEC 91087:2016-05 | WELL INTEGRITY - PART 2: WELL INTEGRITY FOR THE OPERATIONAL PHASE (ISO/TS 16530-2:2014) |
| 03/308169 DC : DRAFT MAY 2003 | ISO 21329 P&NGI - PIPELINE TRANSPORTATION SYSTEMS - TEST PROCEDURES FOR MECHANICAL CONNECTORS |
| ISO 15156-3:2015 | Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
| ISO 21329:2004 | Petroleum and natural gas industries — Pipeline transportation systems — Test procedures for mechanical connectors |
| ISO 17348:2016 | Petroleum and natural gas industries — Materials selection for high content CO2 for casing, tubing and downhole equipment |
| EN ISO 21329:2004 | Petroleum and natural gas industries - Pipeline transportation systems - Test procedures for mechanical connectors (ISO 21329:2004) |
| EN ISO 17348:2016 | Petroleum and natural gas industries - Materials selection for high content CO2 environment for casings, tubings and downhole equipment (ISO 17348:2016) |
| EN ISO 13679:2006 | Petroleum and natural gas industries - Procedures for testing casing and tubing connections (ISO 13679:2002) |
| 01/708298 DC : DRAFT MAY 2001 | ISO/DIS 13679.2 - PETROLEUM AND NATURAL GAS INDUSTRIES - TESTING PROCEDURES FOR CASING AND TUBING CONNECTIONS |
| PD CEN ISO/TS 16530-2:2015 | Well integrity Well integrity for the operational phase |
| I.S. EN ISO 15156-3:2015&LC:2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS (ISO 15156-3:2015) |
| ISO 404:2013 | Steel and steel products — General technical delivery requirements |
| ISO 6929:2013 | Steel products — Vocabulary |
| ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| ASNT SNT TC 1A : 2016 | TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
| ASTM E 309 : 2016 : REDLINE | Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation |
| ISO/TR 9769:1991 | Steel and iron — Review of available methods of analysis |
| ASTM E 562 : 2011 : REDLINE | Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 525:2013 | Bonded abrasive products — General requirements |
| ISO 4885:2017 | Ferrous materials — Heat treatments — Vocabulary |
| ISO 6892-1:2016 | Metallic materials — Tensile testing — Part 1: Method of test at room temperature |
| ASTM E 340 : 2015 : REDLINE | Standard Practice for Macroetching Metals and Alloys |
| ISO 9303:1989 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Full peripheral ultrasonic testing for the detection of longitudinal imperfections |
| ISO 9304:1989 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Eddy current testing for the detection of imperfections |
| ISO 783:1999 | Metallic materials — Tensile testing at elevated temperature |
| ASTM E 1473 : 2016 : REDLINE | Standard Test Methods for Chemical Analysis of Nickel, Cobalt and High-Temperature Alloys |
| ISO 11496:1993 | Seamless and welded steel tubes for pressure purposes — Ultrasonic testing of tube ends for the detection of laminar imperfections |
| ISO 9598:1989 | Seamless steel tubes for pressure purposes — Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections |
| ISO 4948-1:1982 | Steels — Classification — Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition |
| ISO 15156-2:2015 | Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons |
| ISO 9402:1989 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections |
| ISO 15156-3:2015 | Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
| ISO 10543:1993 | Seamless and hot-stretch-reduced welded steel tubes for pressure purposes — Full peripheral ultrasonic thickness testing |
| ISO 10474:2013 | Steel and steel products — Inspection documents |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ASTM E 381 : 2017 : REDLINE | Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings |
| ISO 15156-1:2015 | Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 1: General principles for selection of cracking-resistant materials |
| ISO 13665:1997 | Seamless and welded steel tubes for pressure purposes — Magnetic particle inspection of the tube body for the detection of surface imperfections |
| ISO 11484:2009 | Steel products — Employer's qualification system for non-destructive testing (NDT) personnel |
| ISO 4948-2:1981 | Steels — Classification — Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics |
| ASTM E 709 : 2015 : REDLINE | Standard Guide for Magnetic Particle Testing |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
| ISO 10124:1994 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Ultrasonic testing for the detection of laminar imperfections |
| ISO 11960:2014 | Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells |
| ISO 12095:1994 | Seamless and welded steel tubes for pressure purposes — Liquid penetrant testing |
| ISO 9305:1989 | Seamless steel tubes for pressure purposes — Full peripheral ultrasonic testing for the detection of transverse imperfections |
Summarise
US$96.00
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.