• There are no items in your cart

MIL-DTL-32372 Revision A:2016

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

FITTING, ADAPTER, HYDRAULIC AND PNEUMATIC, NPTF TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F
Available format(s)

PDF

Superseded date

05-08-2021

Language(s)

English

1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES

Specifies fittings, adapter, hydraulic, and pneumatic national pipe thread fuel, (NPTF) dryseal pipe threads to o-ring face seal (ORFS) connectors, 1500 to 3000 psi, -65 degrees F to 250 degrees F temperature range, for use in hydraulic or pneumatic systems.

Committee
FSC 4730
DocumentType
Standard
Pages
16
PublisherName
US Military Specs/Standards/Handbooks
Status
Superseded
SupersededBy

MIL-DTL-32372-4 Revision A:2017 FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS BULKHEAD
MIL-DTL-32372-12 Revision A:2017 FITTING, ADAPTER, TEE, HYDRAULIC AND PNEUMATIC, NPTF MALE ON BRANCH TO ORFS MALE RUN TO RUN
MIL-DTL-32372-8 Revision A:2017 FITTING, ADAPTER, 45 DEGREE, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS FEMALE SWIVEL
MIL-DTL-32372-9 Revision A:2017 FITTING, ADAPTER, 90 DEGREE, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS FEMALE SWIVEL
MIL-DTL-32372-7 Revision A:2017 FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS FEMALE SWIVEL
MIL-DTL-32372-6 Revision A:2017 FITTING, ADAPTER, 90 DEGREE, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS BULKHEAD
MIL-DTL-32372-2 Revision A:2017 FITTING, ADAPTER, 45 DEGREE ELBOW, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS MALE
MIL-DTL-32372-11 Revision A:2017 FITTING, ADAPTER, TEE, HYDRAULIC AND PNEUMATIC, NPTF MALE ON BRANCH TO ORFS MALE TO FEMALE RUN TO RUN
MIL-DTL-32372-5 Revision A:2017 FITTING, ADAPTER, 45 DEGREE, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS BULKHEAD
MIL-DTL-32372-10 Revision A:2017 FITTING, ADAPTER, TEE, HYDRAULIC AND PNEUMATIC, NPTF MALE ON BRANCH TO ORFS FEMALE RUN TO RUN
MIL-DTL-32372-1 Revision A:2017 FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS MALE
MIL-DTL-32372-3 Revision A:2017 FITTING, ADAPTER, 90 DEGREE ELBOW, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS MALE

ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
SAE AMS 5645 : 2016 STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED
SAE AMS QQ A 225/9 : 2014 ALUMINUM ALLOY 7075, BAR, ROD, WIRE, AND SPECIAL SHAPES; ROLLED, DRAWN, OR COLD FINISHED
SAE AMS QQ P 416 : 2016 PLATING, CADMIUM (ELECTRODEPOSITED)
SAE AMS P 5510 : 2013 O-RING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE 1 HYDRAULIC (-65 TO 160 DEGREES F)
SAE AMS 2488 : 2000 ANODIC TREATMENT - TITANIUM AND TITANIUM ALLOYS SOLUTION PH 13 OR HIGHER
MIL-DTL-16232 Revision G:2000 PHOSPHATE COATING, HEAVY, MANGANESE OR ZINC BASE
MIL-PRF-7808 Revision L:1997 LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE
ANSI/NCSL Z540 3 : 2006(R2013) REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT
MIL-PRF-5606 Revision H:2002 HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE
SAE AMS 6382 : 2014 STEEL, BARS, FORGINGS, AND RINGS 0.95CR - 0.20MO (0.38 - 0.43C) (SAE 4140) ANNEALED
SAE AMS 5643 : 2016 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
SAE AMS 5743 : 2014 STEEL, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS 15.5CR - 4.5NI - 2.9MO - 0.10N SOLUTION HEAT TREATED, SUB-ZERO COOLED, EQUALIZED, AND OVER-TEMPERED
ASTM E 384 : 2017 : REDLINE Standard Test Method for Microindentation Hardness of Materials
SAE AMS WW T 700/4 : 2012 TUBE, ALUMINUM ALLOY, DRAWN, SEAMLESS, 5052
SAE AMS A 22771 : 2012 ALUMINUM ALLOY FORGINGS, HEAT TREATED
SAE J 403 : 2014 CHEMICAL COMPOSITIONS OF SAE CARBON STEELS
SAE AMS WW T 700/6C : 2001(S2015) TUBE, ALUMINUM ALLOY, DRAWN, SEAMLESS, 6061
ASME B46.1 : 2009 SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
SAE AMS 5647 : 2017 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 9.5NI, SOLUTION HEAT TREATED
MIL-STD-889 Revision C:2016 DISSIMILAR METALS
MIL-DTL-81706 Revision B:2004 CHEMICAL CONVERSION MATERIALS FOR COATING ALUMINUM AND ALUMINUM ALLOYS
MIL-PRF-87257 Revision C:2017 HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT AND MISSILE
SAE AMS 2417 : 2013 PLATING, ZINC-NICKEL ALLOY
SAE J 1453/3 : 2012 SPECIFICATION FOR O-RING FACE SEAL CONNECTORS: PART 3 - REQUIREMENTS, DIMENSIONS, AND TESTS FOR STEEL UNIONS, BULKHEADS, SWIVELS, BRAZE SLEEVES, CAPS, AND CONNECTORS WITH SAE J1926-2 INCH STUD ENDS
ASTM B 567 : 1998 Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
SAE J 515 : 2015 SPECIFICATION FOR O-RING MATERIALS USED WITH HYDRAULIC CONNECTORS
SAE J 1453/1 : 2012 SPECIFICATION FOR O-RING FACE SEAL CONNECTORS - PART 1: TUBE CONNECTION DETAILS AND COMMON REQUIREMENTS FOR PERFORMANCE AND TESTS
ISO 19879:2010 Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections
SAE J 514 : 2012 HYDRAULIC TUBE FITTINGS
MIL A 8625 : F ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS
SAE AMS 2700E : 2011 PASSIVATION OF CORROSION RESISTANT STEELS
MIL-PRF-83282 Revision D:1997 HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537
SAE AMS 5639 : 2017 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED
SAE AMS 6370 : 2016 STEEL, BARS, FORGINGS, AND RINGS, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130)
FED-STD-162 Revision A:1967 HOSE, RUBBER, VISUAL INSPECTION GUIDE FOR
MIL-C-15726 Revision F:1988 COPPER NICKEL ALLOY, SHEET, PLATE, STRIP, BAR, ROD AND WIRE
SAE AMS 4124 : 2012 ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE - 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T7351), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND OVERAGED
SAE AMS 4928 : 2016 TITANIUM ALLOY BARS, WIRE, FORGINGS, RINGS, AND DRAWN SHAPES, 6AL - 4V, ANNEALED

View more information

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.