MIL-DTL-83797 Revision C:2008
Current
Current
Hose, Rubber, Lightweight, Medium Pressure, General Specification for
Available format(s)
PDF
Published date
10-20-2008
Publisher
US$20.00
Excluding Tax where applicable
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies the general requirements for hose, rubber, lightweight, medium pressure, with operating limits of -65 to 250 degrees F and 200 to 1000 psi suitable for aircraft fuel and oil systems within the limits specified herein.
| DevelopmentNote |
Supersedes MIL H 83797 (A) (11/2000)
|
| DocumentType |
Standard
|
| Pages |
77
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers the general requirements for hose, rubber, lightweight, medium pressure, with operating limits of -65 to 250°F and 200 to 1000 psi suitable for aircraft fuel and oil systems within the limits specified herein.
| MIL-DTL-83796-16 Revision A:2010 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flareless to Flange |
| MIL-DTL-83796-10 Revision A:2014 | Hose Assembly, Rubber, Light Weight, Internal Support Coil, Medium Pressure, Field Attachable End Fittings, Flare to Flare |
| MIL-DTL-83796-11 Revision A:2014 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flare to Flare, with Lockwire Hole |
| MIL-DTL-83796-4 Revision C:2014 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flareless to Flareless with Lockwire Hole |
| MIL-DTL-83796-7 Revision D:2014 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flareless to Flange |
| MIL-DTL-83796 Revision B:2008 | Hose Assembly, Rubber, Lightweight, Medium Pressure, General Specification for |
| MIL-DTL-83796-6 Revision D:2014 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flare to Flange, with Lockwire Hole |
| MIL-DTL-83796-14 Revision A:2010 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flare to Flange |
| MIL-DTL-83796-18 Revision A:2010 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flange to Flange |
| MIL-DTL-83796-15 Revision A:2010 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flare to Flange, with Lockwire Hole |
| MIL-DTL-83798 Revision D:2008 | Fitting, Rubber Hose, Lightweight, Medium Pressure, General Specification For |
| MIL-DTL-83796-1 Revision C:2014 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flare to Flare |
| MIL-DTL-83796-5 Revision D:2014 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flare to Flange |
| MIL-DTL-83796-13 Base Document:2008 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flareless to Flareless, with Lockwire Hole |
| MIL-DTL-83796-3 Revision C:2014 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flareless to Flareless |
| MIL-DTL-83796-9 Revision C:2010 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flange to Flange |
| MIL-DTL-83796-8 Revision D:2014 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flareless to Flange, with Lockwire Hole |
| MIL-DTL-83796-17 Revision A:2010 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flareless to Flange, with Lockwire Hole |
| MIL-DTL-83796-12 Base Document:2008 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flareless to Flareless |
| MIL-DTL-83796-2 Revision C:2014 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flare to Flare, with Lockwire Hole |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| MIL-STD-130 Revision N:2007 | Identification Marking of U.S. Military Property |
| MIL-DTL-83796-13 Base Document:2008 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flareless to Flareless, with Lockwire Hole |
| MIL-DTL-5624 Revision W:2016 | Turbine Fuel, Aviation, Grades JP-5 (NATO F-44) |
| MIL-DTL-83796-2 Revision C:2014 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flare to Flare, with Lockwire Hole |
| MIL-DTL-83796-14 Revision A:2010 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flare to Flange |
| MIL-DTL-83796-9 Revision C:2010 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flange to Flange |
| MIL-DTL-83796-17 Revision A:2010 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flareless to Flange, with Lockwire Hole |
| MIL-PRF-7808 Revision L:1997 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| MIL-DTL-83796-7 Revision D:2014 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flareless to Flange |
| MIL-PRF-5606 Revision H:2002 | Hydraulic Fluid, Petroleum Base; Aircraft, Missile, and Ordnance, NATO Code H-515 |
| MIL-DTL-83796-8 Revision D:2014 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flareless to Flange, with Lockwire Hole |
| MIL-DTL-83796 Revision B:2008 | Hose Assembly, Rubber, Lightweight, Medium Pressure, General Specification for |
| MIL-STD-889 Revision C:2016 | Galvanic Compatibility of Electrically Conductive Materials |
| SAE AS1933A | Age Controls for Hose Containing Age-Sensitive Elastomeric Material |
| MIL-PRF-87257 Revision C:2017 | Hydraulic Fluid, Fire Resistant, Low Temperature, Synthetic Hydrocarbon Base, Aircraft and Missile |
| MIL-DTL-83796-5 Revision D:2014 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flare to Flange |
| MIL-DTL-83796-3 Revision C:2014 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flareless to Flareless |
| MIL-DTL-83796-16 Revision A:2010 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flareless to Flange |
| MIL-DTL-83796-10 Revision A:2014 | Hose Assembly, Rubber, Light Weight, Internal Support Coil, Medium Pressure, Field Attachable End Fittings, Flare to Flare |
| MIL-DTL-83796-1 Revision C:2014 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flare to Flare |
| MIL-DTL-83133 Revision J:2015 | Turbine Fuel, Aviation, Kerosene Type, JP-8 (NATO F-34) and NATO F-35 |
| MS20756 Revision F:2011 | Flange, Swivel, Retaining |
| MIL-DTL-83796-12 Base Document:2008 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flareless to Flareless |
| MIL-PRF-83282 Revision D:1997 | Hydraulic Fluid, Fire Resistant, Synthetic Hydrocarbon Base, Metric, NATO Code Number H-537 |
| MIL-DTL-83796-18 Revision A:2010 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flange to Flange |
| MIL-DTL-83796-11 Revision A:2014 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flare to Flare, with Lockwire Hole |
| MIL-DTL-83796-15 Revision A:2010 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flare to Flange, with Lockwire Hole |
| MIL-DTL-83796-4 Revision C:2014 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flareless to Flareless with Lockwire Hole |
| MIL-DTL-83796-6 Revision D:2014 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flare to Flange, with Lockwire Hole |
| MIL-DTL-83798 Revision D:2008 | Fitting, Rubber Hose, Lightweight, Medium Pressure, General Specification For |
Summarise
US$20.00
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.