• There are no items in your cart

MIL-STD-882 Revision E:2012

Current

Current

The latest, up-to-date edition.

System Safety

Available format(s)

PDF

Language(s)

English

Published date

05-11-2012

FOREWORD
1. SCOPE
2. APPLICABLE DOCUMENTS
3. DEFINITIONS
4. GENERAL REQUIREMENTS
5. DETAILED REQUIREMENTS
6. NOTES
TASK SECTION 100 - MANAGEMENT
TASK SECTION 200 - ANALYSIS
TASK SECTION 300 - EVALUATION
TASK SECTION 400 - VERIFICATION
APPENDIX A - GUIDANCE FOR THE SYSTEM
             SAFETY EFFORT
APPENDIX B - SOFTWARE SYSTEM SAFETY
             ENGINEERING AND ANALYSIS

Classifies the Department of Defense (DoD) Systems Engineering (SE) approach to eliminating hazards, where possible, and minimizing risks where those hazards cannot be eliminated. Specifies hazards as they apply to systems/products/equipment/infrastructure (including both hardware and software) throughout design, development, test, production, use, and disposal.

This system safety standard practice identifies the Department of Defense (DoD) Systems Engineering (SE) approach to eliminating hazards, where possible, and minimizing risks where those hazards cannot be eliminated. Applicable DoD Instruction (DoDI) 5000 series defines the risk acceptance authorities. This Standard covers hazards as they apply to systems / products / equipment / infrastructure (including both hardware and software) throughout design, development, test, production, use, and disposal. When this Standard is required in a solicitation or contract but no specific task is identified, only Sections 3 and 4 are mandatory. The definitions in 3.2 and all of Section 4 delineate the minimum mandatory definitions and requirements for an acceptable system safety effort for any DoD system.

DevelopmentNote
NEW CHILD NOT 1 2022 IS NOW ADDED
DocumentType
Standard
Pages
105
ProductNote
NEW CHILD NOT 1 2022 IS NOW ADDED
PublisherName
US Military Specs/Standards/Handbooks
Status
Current
Supersedes

SAE AIR 4004 : 2015 GUIDE FOR INSTALLATION OF ELECTRICAL WIRE AND CABLE ON AIRCRAFT LANDING GEAR
DEFSTAN 00-250(PT3)SEC13/1(2008) : 2008 HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 13 - THE WORKPLACE
MIL-I-85889 Base Document:1988 IGNITER, JET ASSISTED TAKE OFF (JATO) PROPULSION SYSTEM, GENERAL DEVELOPMENT SPECIFICATION FOR
15/30322573 DC : 0 BS ISO/IEC 33071 - INFORMATION TECHNOLOGY - PROCESS ASSESSMENT - AN INTEGRATED PROCESS CAPABILITY ASSESSMENT MODEL FOR ENTERPRISE PROCESSES
PD IEC/TS 62239-2:2017 Process management for avionics. Management plan Preparation and maintenance of an electronic COTS assembly management plan
AFGS-87213 Revision B:1993 DISPLAYS, AIRBORNE, ELECTRONICALLY/OPTICALLY GENERATED
MIL-DTL-25959 Revision H:2012 TIE DOWN, TENSIONERS, CARGO, AIRCRAFT
DOD-S-87956 Base Document:1979 SHELTER, S-80A AND S-82A
MIL-T-5842 Revision B:1985 TRANSPARENT AREAS ON AIRCRAFT SURFACES [WINDSHIELDS AND CANOPIES] RAIN REMOVING AND WASHING SYSTEMS FOR, DEFROSTING, DEICING, DEFOGGING, GENERAL SPECIFICATION FOR
MIL-I-83294 Base Document:1971 INSTALLATION REQUIREMENT, AIRCRAFT PROPULSION SYSTEMS, GENERAL SPECIFICATION FOR
MIL-STD-2156 Base Document:1983 LAUNCHER, RAIL, GUIDED MISSILE, AIRCRAFT, GENERAL DESIGN CRITERIA FOR
MIL-DTL-53135 Base Document:1996 AUXILIARY POWER UNIT, 10 KW, 120/240 VAC, 60 HZ
SAE AS 5506/1 : 2015 SAE ARCHITECTURE ANALYSIS AND DESIGN LANGUAGE (AADL) ANNEX VOLUME 1: ANNEX A: ARINC653 ANNEX, ANNEX C: CODE GENERATION ANNEX, ANNEX E: ERROR MODEL ANNEX
MIL L 24554 : 0 LAMPS MK III INTERFACE SIGNAL SWITCHING SET
MIL-PRF-32104 Base Document:2010 MOBILE HYDRAULIC OIL DISPENSER
MIL-STD-1629 Revision A:1980 PROCEDURES FOR PERFORMING A FAILURE MODE, EFFECTS AND CRITICALITY ANALYSIS
MIL-PRF-32080 Revision G:2014 TRUCK, AIRCRAFT FUELING-DEFUELING, 6,000 GALLON, A/S32R-11
MIL-L-53106 Base Document:1990 LAUNCHER, BRIDGE, LIGHT ASSAULT TOWED
GEIA TA HB 0009 : 2013 RELIABILITY PROGRAM HANDBOOK
MIL-HDBK-2084 Base Document:1995 General Requirements for Maintainability of Avionic and electronic Systems and Equipment
JSGS-87231 Revision A:1995 ENGINES, AIRCRAFT, TURBINE
BS ISO/IEC 33071:2016 Information technology. Process assessment. An integrated process capability assessment model for Enterprise processes
MIL-M-8555 Revision C:1984 MISSILE, GUIDED, DESIGN AND CONSTRUCTION, GENERAL SPECIFICATION
MIL-PRF-85676 Revision A:2006 LIGHTING, EMERGENCY EGRESS, SUBASSEMBLY
ANSI A10.17 : 2006 : R2011 SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION
MIL-STD-756 Revision B:1981 RELIABILITY MODELING AND PREDICTION
MIL-A-85055 Base Document:1979 AVIONICS SYSTEM PERFORMANCE SPECIFICATION FOR A-4M/AV-8 BOMBING SET, ANGLE RATE AN/ASB-19(V)
MIL I 27197 : C INDICATOR, AIRSPEED, MACH NUMBER AND MAXIMUM ALLOWABLE SPEED
NASA SP 580 : 2011 NASA SYSTEM SAFETY HANDBOOK - VOLUME 1, SYSTEM SAFETY FRAMEWORK AND CONCEPTS FOR SYSTEM SAFETY FRAMEWORK AND CONCEPTS FOR IMPLEMENTATION
DEFSTAN 00-250(PT3)SEC12/1(2008) : 2008 HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 12 - OPERATIONS, MAINTENANCE & SUPPORT
MIL-HDBK-11991 Base Document:1996 DESIGN OF ELECTRICAL, ELECTRONIC, AND ELECTRO-MECHANICAL EQUIPMENT, GUIDED MISSILE AND ASSOCIATED WEAPONS SYSTEMS
GEIA HB 649 : 2005 CONFIGURATION MANAGEMENT STANDARD IMPLEMENTATION GUIDE
ANSI A10.17 : 2006 SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION
MIL-HDBK-287 Base Document:1989 A TAILORING GUIDE FOR DOD-STD-2167, DEFENSE SYSTEM SOFTWARE DEVELOPMENT
MIL-STD-2124 Revision A:1984 FLIGHT INCIDENT RECORDER/CRASH POSITION LOCATOR, MINIMUM PERFORMANCE STANDARDS FOR
IEEE 1887-2017 IEEE Guide for Wayside Energy Storage Systems for DC Traction Applications
MIL-PRF-83419 Revision F:2016 ALTIMETER, SERVO CONTROLLED, AUTOMATIC PRESSURE STANDBY
MIL STD 2080 : 0 MAINTENANCE ENGINEERING, PLANNING AND ANALYSIS FOR AERONAUTICAL SYSTEMS, SUBSYSTEMS, EQUIPMENT AND SUPPORT EQUIPMENT
MIL-P-6457 Revision E:1974 POWER SUPPLY, METALLIC RECTIFIER TYPE, GENERAL SPECIFICATION FOR
MIL S 0053085 : A SURVEY INSTRUMENT AUTOMATED, INTEGRATED (AISI)
SAE JA 1003 : 2012 SOFTWARE RELIABILITY PROGRAM IMPLEMENTATION GUIDE
ANSI/ASSE A10.17 : 2006 : R2011 SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION
DI-MGMT-81398 Revision C:2014 HAZARDOUS MATERIALS MANAGEMENT PROGRAM (HMMP) PLAN
MIL-A-23121 Revision C:1970 AIRCREW ENVIRONMENTAL, ESCAPE AND SURVIVAL COCKPIT CAPSULE SYSTEM, GENERAL SPECIFICATION FOR
DEFSTAN 00-970(PT0)/9(2012) : 2012 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
MIL DTL 0053133 : B NOTICE 1 GENERATOR SETS, SKID MOUNTED, TACTICAL, QUIET, DIESEL ENGINE DRIVEN, ALTERNATING CURRENT 5 THROUGH 60 KILOWATTS, GENERAL SPECIFICATION FOR
MIL-STD-2088 Revision B:2007 BOMB RACK UNIT (BRU), SINGLE STORE, AIRCRAFT
MIL-A-52767 Revision D:1989 AIR CONDITIONER: VERTICAL AND HORIZONTAL, COMPACT
DEFSTAN 00-970(PT0)/17(2016) : 2016 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/14(2014) : 2014 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
MIL-A-81973 Base Document:1974 AIRCREW AUTOMATED ESCAPE SYSTEMS, TEST VEHICLES FOR GROUND TRACK PERFORMANCE TESTING, ROCKET AND/OR JET ENGINE PROPELLED; GENERAL SPECIFICATION FOR
MIL BULL 343 : A DOCUMENTS APPLICABLE TO AIRCRAFT ENGINES AND PROPELLERS, USE OF
DEFSTAN 00-970(PT0)/7(2011) : 2011 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
MIL-STD-1365 Revision C:2010 GENERAL DESIGN CRITERIA FOR HANDLING EQUIPMENT ASSOCIATED WITH WEAPONS AND RELATED ITEMS
DEFSTAN 00-970(PT0)/11(2013) : 2013 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
SAE JA7496:2022 Cyber-Physical Systems Security Engineering Plan (CPSSEP)
MIL-DTL-53133 Revision C:2002 GENERATOR SETS, SKID MOUNTED, TACTICAL, QUIET, DIESEL ENGINE DRIVEN, ALTERNATING CURRENT 5 THROUGH 60 KILOWATTS
DEFSTAN 00-970(PT0)/13(2014) : 2014 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/15(2015) : 2015 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/12(2014) : 2014 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
MIL-A-83477 Revision A:1976 AIR CONDITIONER, A/M32C-18 TRAILER MOUNTED, DIESEL ENGINE DRIVEN
MIL-DTL-53126 Revision A:2012 POWER DISTRIBUTION, ILLUMINATION SYSTEMS, ELECTRICAL, GENERAL SPECIFICATION FOR
UFC 4-133-01 : CHANGE 1 UNIFIED FACILITIES CRITERIA - AIR TRAFFIC CONTROL AND AIR OPERATIONS FACILITIES
UFC 4-141-04 : Change 1 UNIFIED FACILITIES CRITERIA - EMERGENCY OPERATIONS CENTER PLANNING AND DESIGN
DEFSTAN 00-970(PT0)/8(2011) : 2011 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
SAE AS 6228 : 2014 SAFETY REQUIREMENTS FOR PROCUREMENT, MAINTENANCE AND USE OF HAND-HELD POWERED TOOLS
MIL-PRF-32335 Base Document:2010 TRICON REFRIGERATED CONTAINER SYSTEM (TRCS)
MIL-DTL-32496 Base Document:2014 GENERATOR SETS, SKID MOUNTED, TRAILER MOUNTED ADVANCED MEDIUM-SIZED MOBILE POWER SOURCES, TACTICAL DIESEL FUEL DRIVEN, ALTERNATING CURRENT 5 THROUGH 60 KILOWATTS, GENERAL SPECIFICATION FOR
SAE ARP 6385 : 2017 AIRCRAFT FUEL PUMP MECHANICAL AND ELECTRICAL SAFETY DESIGN
DEFSTAN 00-970(PT0)/16(2015) : 2015 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/10(2013) : 2013 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
MIL-C-85521 Base Document:1983 Concentrator, Oxygen, GGU-7/A
ASTM F 3201 : 2016 Standard Practice for Ensuring Dependability of Software Used in Unmanned Aircraft Systems (UAS)
DEFSTAN 00-250(PT2)/1(2008) : 2008 HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 2: PARTICULAR PEOPLE-RELATED REQUIREMENTS
MIL-R-85880 Base Document:1988 ROCKET, JET ASSISTED TAKE OFF (JATO) PROPULSION SYSTEM, GENERAL DEVELOPMENT SPECIFICATION FOR
DI-MGMT-81826 Revision C:2014 F/A-18 - EA-18 AIRCRAFT/SYSTEM PROGRAM PROTECTION IMPLEMENTATION PLAN
MIL-STD-2097 Revision A:1989 ACQUISITION OF SUPPORT EQUIPMENT AND ASSOCIATED INTEGRATED LOGISTICS SUPPORT
MIL-PRF-53090 Revision B:2016 BLADE, MINE CLEARING
MIL-STD-721 Revision C:1981 DEFINITIONS OF EFFECTIVENESS TERMS FOR RELIABILITY MAINTAINABILITY, HUMAN FACTORS, AND SAFETY
MIL-H-4607 Revision E:1987 HEATER, ENGINE AND SHELTER, GROUND
MIL-E-4158 Revision E:1973 ELECTRONIC EQUIPMENT, GROUND GENERAL REQUIREMENTS FOR
MIL-B-53107 Base Document:1990 BRIDGE, LIGHT ASSAULT 23 METER SPAN
AFGS-87219 Revision B:2012 ELECTRICAL POWER SYSTEMS, AIRCRAFT
SAE ARP 5764 : 2013(R2018) AEROSPACE ACTIVE INCEPTOR SYSTEMS FOR AIRCRAFT FLIGHT AND ENGINE CONTROLS
MIL-P-85710 Base Document:1986 PARACHUTES, PERSONNEL, EMERGENCY ESCAPE GENERAL DESIGN SPECIFICATION FOR
BS ISO 4126-10:2010 Safety devices for protection against excessive pressure Sizing of safety valves for gas/liquid two-phase flow
DEFSTAN 00-250(PT3)SEC1-7/1(2008) : 2008 HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTIONS 1-7 - OVERALL CONTENTS/SCOPE
SAE ARP 5796 : 2013 FLIGHT CRITICAL CONTROL VALVES, MILITARY AIRCRAFT
DEFSTAN 00-250(PT3)SEC8/1(2008) : 2008 HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 8 - PEOPLE IN SYSTEMS
MIL-HDBK-2067 Base Document:1999 AIRCREW AUTOMATED ESCAPE SYSTEMS RELIABILITY AND MAINTAINABILITY (R/M) PROGRAM REQUIREMENTS FOR
MIL P 87220 : 0 PROPELLANT, AND EXPLOSIVE SYSTEMS, AIRCRAFT CREW ESCAPE REQUEST FOR ISSUE OTHER THAN DOD MUST BE SENT VIA; ASD/ENES, WRIGHT PATTERSON, AFB OH 45433-6503
MIL-STD-705 Revision D:2016 MOBILE ELECTRIC POWER SYSTEMS
MIL-STD-100 Revision G:1997 ENGINEERING DRAWINGS
MIL-P-85766 Base Document:1986 PROJECTILE, 20 MILLIMETER , TARGET PRACTICE-TRACER, PGU-30/B
MIL-HDBK-510 Revision A:2014 AEROSPACE FUELS CERTIFICATION
MIL-E-50796 Base Document:1973 EXPANDING SHIELDED MILD DETONATING CORD ASSEMBLY
ANSI A10.17 : 2006 SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION
MIL-STD-973 Base Document:1992 CONFIGURATION MANAGEMENT
MIL-STD-1904 Revision B:2016 Test Standards for Level A and Level B Packaging for Conventional Ammunition
MIL-W-52875 Revision B:1983 WATER QUALITY ANALYSIS SET: PREVENTIVE MEDICINE
MIL-STD-884 Revision C:1975 ELECTRONICALLY OR OPTICALLY GENERATED DISPLAYS FOR AIRCRAFT CONTROL AND COMBAT CUE INFORMATION
MIL-M-87977 Base Document:1987 MAINTENANCE PLATFORM, AIRCRAFT
MIL-DTL-32408 Base Document:2012 INTEGRAL MOTOR PUMP (IMP)
DEFSTAN 00-56(PT1)/5(2014) : 2014 SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 1: REQUIREMENTS AND GUIDANCE
DEFSTAN 00-55(PT1)/3(2014) : 2014 REQUIREMENTS FOR SAFETY OF PROGRAMMABLE ELEMENTS (PE) IN DEFENCE SYSTEMS - PART 1: REQUIREMENTS AND GUIDANCE
CSA ISO/TS 14798 : 2007 LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - RISK ASSESSMENT AND REDUCTION METHODOLOGY
MIL-DTL-32572 Base Document:2017 Anchor Windlass, Electro-Mechanical, Vertical, Two-Speedand Variable-Speed
MIL-DTL-83833 Revision B:2014 3000 GALLON AERIAL BULK FUEL DELIVERY SYSTEM BLADDER
DOD-B-24668 Base Document:1986 BEARING UNIT, MAIN THRUST, SUBMARINE PROPULSION SYSTEM
MIL-S-8512 Revision D:1974 SUPPORT EQUIPMENT AERONAUTICAL, SPECIAL, GENERAL SPECIFICATION FOR THE DESIGN OF
MIL-DTL-83833 Revision C:2017 3000 GALLON AERIAL BULK FUEL DELIVERY SYSTEM BLADDER
MIL-HDBK-764 Base Document:1990 System Safety Engineering Design guide for Army Materiel
MIL-STD-1901 Revision A:2002 MUNITION ROCKET AND MISSILE MOTOR IGNITION SYSTEM DESIGN, SAFETY CRITERIA FOR
MIL-P-83927 Revision B:1981 Power Supplies, Guided Missile Launchers, Single Types PP-2401B/A PP-2401C/A PP-2401D/A, PP-4285/A, PP-4286/A, and Composite Type PP-4506/A and PS-1037
MIL-HDBK-2097 Revision A:1997 ACQUISITION OF SUPPORT EQUIPMENT AND ASSOCIATED INTEGRATED LOGISTICS SUPPORT
DEFSTAN 00-250(PT3)SEC14/1(2008) : 2008 HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 14 - THE ENVIRONMENT
MIL-A-85648 Base Document:1983 AMPLIFIER, TRAVELING WAVE TUBE
MIL-A-11210 Revision G:1981 AIR CONDITIONERS: BASE MOUNTED, SELF-CONTAINED, MULTIPACKAGE-TYPE, AIR-COOLED, ELECTRIC-MOTOR-DRIVEN, 18,000 - BTU/HR
MIL-STD-2131 Revision A:1991 LAUNCHER, EJECTION GUIDED MISSILE, AIRCRAFT, GENERAL DESIGN CRITERIA FOR
MIL B 8075 : D BRAKE CONTROL SYSTEMS, ANTI SKID, AIRCRAFT WHEELS, INSTRUCTIONS FOR PREPARATION OF
DEFSTAN 00-250(PT3)SEC10/1(2008) : 2008 HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 10 - SYSTEMS SAFETY
DEFSTAN 00-250(PT3)SEC11/1(2008) : 2008 HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 11 - TRAINING
MIL S 83352 : B SIGNAL KIT, PERSONNEL, DISTRESS, A/P25S-5A
SAE AS 8700 : 1999 INSTALLATION AND TEST OF ELECTRONIC EQUIPMENT IN AIRCRAFT, GENERAL SPECIFICATION FOR
NFPA 130 : 2017 FIXED GUIDEWAY TRANSIT AND PASSENGER RAIL SYSTEMS
ANSI/CSA NGV 5.1-2016 (R2020) Residential fueling appliances
CSA NGV 5.1 : 2016 RESIDENTIAL FUELING APPLIANCES
MIL-PRF-32168 Base Document:2004 VARIABLE SPEED DRIVE SYSTEM FOR INDUCTION AND SYNCHRONOUS MACHINES
MIL-HDBK-115 Revision C:2016 U.S. ARMY REVERSE ENGINEERING HANDBOOK (GUIDELINES AND PROCEDURES)
UFC 4-440-01 : 2014 UNIFIED FACILITIES CRITERIA - WAREHOUSES AND STORAGE FACILITIES
SAE ARP594 : 2017 FUEL PUMP THERMAL SAFETY DESIGN
ASME A17.7 : 2007 : R2012 PERFORMANCE-BASED SAFETY CODE FOR ELEVATORS AND ESCALATORS
VDI 4007:2012-06 Reliability goals - Determination, check, review, certificate
ASME A17.7 : 2007 PERFORMANCE-BASED SAFETY CODE FOR ELEVATORS AND ESCALATORS
MIL-HDBK-516 Revision C:2014 AIRWORTHINESS CERTIFICATION CRITERIA
PD ISO/TS 18667:2018 Space systems. Capability-based Safety, Dependability, and Quality Assurance (SD&QA) programme management
UFC 4-133-01N : Change 5 UNIFIED FACILITIES CRITERIA - NAVY AIR TRAFFIC CONTROL FACILITIES
AAS3P-20 : 2017 SAFETY AND SUITABILITY FOR SERVICE ASSESSMENT TESTING OF LARGE CALIBER AMMUNITION GREATER THAN 40MM
MIL-S-8812 Revision D:1975 STEERING SYSTEM, AIRCRAFT GENERAL REQUIREMENTS FOR
MIL-G-18473 Revision B:1978 GENERATOR, MOTOR, AND AUXILIARY EQUIPMENT, DIRECT CURRENT, NAVAL SHIP PROPULSION
MIL-STD-1310 Revision H:2009 SHIPBOARD BONDING, GROUNDING, AND OTHER TECHNIQUES FOR ELECTROMAGNETIC COMPATIBILITY, ELECTROMAGNETIC PULSE (EMP) MITIGATION, AND SAFETY
AAS3P-12 : 2017 SAFETY AND SUITABILITY FOR SERVICE ASSESSMENT TESTING FOR AIRCRAFT LAUNCHED MUNITIONS
DEFSTAN 00-250(PT4)/1(2008) : 2008 HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 4: HFI METHOD, TOOLS AND TECHNIQUES
MIL-STD-3029 Base Document:2009 HOT GUN COOK-OFF HAZARDS ASSESSMENT, TEST AND ANALYSIS
MIL-HDBK-510-1 Revision A:2010 AEROSPACE FUELS CERTIFICATION
DEFSTAN 00-250(PT0)/1(2008) : 2008 HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 0: HUMAN FACTORS INTEGRATION
SAE EIA 649/1 : 2014 CONFIGURATION MANAGEMENT REQUIREMENTS FOR DEFENSE CONTRACTS
AASTP-4-1 : 1ED 2016 VERSION 4 EXPLOSIVES SAFETY RISK ANALYSIS - PART 1: GUIDELINES FOR RISK-BASED DECISIONS
DEFSTAN 00-051(PT2)/1(2018) : 2018 ENVIRONMENTAL MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 2: GUIDANCE
MIL-S-85510 Base Document:1981
MIL-C-85717 Base Document:1986 CARTRIDGE, 20 MILLIMETER, SEMI-ARMOR PIERCING HIGH EXPLOSIVE INCENDIARY, PGU-28/B
SAE AS 4073 : 2013(R2018) AIR CYCLE AIR CONDITIONING SYSTEMS FOR MILITARY AIR VEHICLES
MIL-HDBK-1760 Revision A:2004 AIRCRAFT/STORE ELECTRICAL INTERCONNECTION SYSTEM
MIL-PRF-32479 Revision A:2017 TRAILERS, LIFT - AIRCRAFT AND MISSILE ENGINE
DEFSTAN 00-55(PT1)/4(2016) : 2016 REQUIREMENTS FOR SAFETY OF PROGRAMMABLE ELEMENTS (PE) IN DEFENCE SYSTEMS - PART 1: REQUIREMENTS AND GUIDANCE
MIL-STD-1798 Revision C:2013 MECHANICAL EQUIPMENT AND SUBSYSTEMS INTEGRITY PROGRAM
MIL-F-85596 Base Document:1983 FIN, RETARDER, AIR INFLATABLE BSU-85/B
MIL-P-87210 Base Document:1984 PNEUMATIC POWER SYSTEMS, HIGH PRESSURE
ANSI A10.17 : 2006 : R2011 SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION
MIL-P-85723 Base Document:1986 PROJECTILE, 20 MILLIMETER, SEMI-ARMOR PIERCING, HIGH EXPLOSIVE INCENDIARY PGU-28/B
MIL-STD-1388-2 Revision B:1991 DOD REQUIREMENTS FOR A LOGISTIC SUPPORT ANALYSIS RECORD
MIL-R-87245 Base Document:1986 RADIO COMMUNICATION SYSTEM, AIRBORNE (REQUEST FOR ISSUE OTHER THAN DOD MUST BE SENT VIA: ASD/ENES WRIGHT PATTERSON AFB OH 45433-6503
MIL-S-18471 Revision G:1983
MIL-I-87216 Base Document:1984 INSTRUMENT SYSTEMS, AIRBORNE REQUEST FOR ISSUE OTHER THAN DOD MUST BE SENT VIA; ASD/ENES, WRIGHT PATTERSON AFB OH 45433-6503
MIL A 87221 : 0 AIRCRAFT STRUCTURES, GENERAL SPECIFICATION FOR REQUEST FOR ISSUE OTHER THAN DOD MUST BE SENT VIA; ASD/ENES, WRIGHT-PATTERSON AFB OH 45433-6503
MIL-HDBK-338 Revision B:1998 ELECTRONIC RELIABILITY DESIGN HANDBOOK
MIL-HDBK-1763 Base Document:1998 AIRCRAFT/STORES COMPATIBILITY: SYSTEMS ENGINEERING DATA REQUIREMENTS AND TEST PROCEDURES
MIL-PRF-32090 Revision A:2016 DELIVERY SYSTEM, AERIAL, BULK FUEL
MIL-STD-40051-2 Revision C:2015 PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR PAGE-BASED TECHNICAL MANUALS (TMS)
MIL-HDBK-2124 Base Document:2000 FLIGHT DATA RECORDER FUNCTIONAL STANDARDS FOR
SAE AS 94900 : 2007 AEROSPACE - FLIGHT CONTROL SYSTEMS - DESIGN, INSTALLATION AND TEST OF PILOTED MILITARY AIRCRAFT, GENERAL SPECIFICATION FOR
DOD STD 2105 : LATEST HAZARD ASSESSMENT TESTS FOR NAVY NON NUCLEAR ORDNANCE
MIL-C-85248 Revision A:1984 CAMERA, STILL PICTURE, PANORAMIC, KA-99A
JSSG-2001 Revision B:2004 Air Vehicle
NASA GB 8719.13 : 0 NASA SOFTWARE SAFETY GUIDEBOOK
MIL-STD-3031 Revision A:2011 ARMY BUSINESS RULES FOR S1000D: INTERNATIONAL SPECIFICATION FOR TECHNICAL PUBLICATIONS UTILIZING A COMMON SOURCE DATA BASE
MIL-PRF-62430 Revision B:2010 HARNESS ASSEMBLY, THERMOCOUPLE
DEFSTAN 00-56(PT2)/2(1996) : 1996 SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 2: GUIDANCE
MIL-M-38780 Revision A:1973 MANUAL,TECHNICAL, NONDESTRUCTIVE INSPECTION
NASA HDBK 8739.23 : 2016 NASA COMPLEX ELECTRONICS HANDBOOK FOR ASSURANCE PROFESSIONALS
MIL-C-63541 Base Document:1982 CANNON 8 INCH HOWITZER, M201/M201A1
DEFSTAN 00-051(PT1)/1(2018) : 2018 ENVIRONMENTAL MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 1: REQUIREMENTS
GEIASTD0007B:2013 LOGISTICS PRODUCT DATA
MIL-STD-1543 Revision B:1988 RELIABILITY PROGRAM REQUIREMENTS FOR SPACE AND LAUNCH VEHICLES
MIL-P-24568 Revision A:1986 POWER SUPPLY, D.C., FOR OXYGEN GENERATOR
MIL-T-27200 Revision C:1975 TRANSMITTER, RATE GYROSCOPE TRU-2A/A
SAE ARP 1281 : 2002 ACTUATORS: AIRCRAFT FLIGHT CONTROLS, POWER OPERATED, HYDRAULIC, GENERAL SPECIFICATION FOR
MIL-I-8700 Revision A:1970 INSTALLATION AND TEST OF ELECTRONIC EQUIPMENT IN AIRCRAFT, GENERAL SPECIFICATION FOR
DEFSTAN 00-250(PT3)SEC15/1(2008) : 2008 HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 15 - WORK EQUIPMENT
FAA AC 431.35-2 : 2005 REUSABLE LAUNCH AND REENTRY VEHICLE SYSTEM SAFETY PROCESS
SAE AIR 5774 : 2012 COMPOSITE FUEL TANKS, FUEL SYSTEM DESIGN CONSIDERATIONS
DEFSTAN 00-56(PT1)/6(2015) : 2015 SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 1: REQUIREMENTS AND GUIDANCE
SAE ARP 5783 : 2012 HEALTH AND USAGE MONITORING METRICS, MONITORING THE MONITOR
IEC TS 62239-2:2017 Process management for avionics - Management plan - Part 2: Preparation and maintenance of an electronic COTS assembly management plan
SAE AIR 6027 : 2017 CONSIDERATIONS FOR SAFE STORE OPERATION ON MANNED AND UNMANNED VEHICLES
ANSI B11.0 : 2015 SAFETY OF MACHINERY - GENERAL REQUIREMENTS AND RISK ASSESSMENT
ASCE 21 96 : 1997 AUTOMATED PEOPLE MOVER STANDARDS - PART 1
ANSI/ASSE Z590.3 : 2011 PREVENTION THROUGH DESIGN GUIDELINES FOR ADDRESSING OCCUPATIONAL HAZARDS AND RISKS IN DESIGN AND REDESIGN PROCESSES
ANSI/ASSE A10.17 : 2006 SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION
ISO/IEC 33071:2016 Information technology Process assessment An integrated process capability assessment model for Enterprise processes
AOP 52 : 2016 GUIDANCE ON SOFTWARE SAFETY DESIGN AND ASSESSMENT OF MUNITION-RELATED COMPUTING SYSTEMS
ANSI/ASSP Z244.1:2016 THE CONTROL OF HAZARDOUS ENERGY LOCKOUT, TAGOUT AND ALTERNATIVE METHODS
MIL-STD-810 Revision G:2008 ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
ISO 4126-10:2010 Safety devices for protection against excessive pressure — Part 10: Sizing of safety valves for gas/liquid two-phase flow
CSA B44.7 : 2007 : R2012 PERFORMANCE-BASED SAFETY CODE FOR ELEVATORS AND ESCALATORS
MIL-DTL-53078 Revision A:2011 MOUNTING KIT: M1 TANK CLEARED LANE MARKING SYSTEM (CLAMS)
NASA STD 8719.24 : 2011 NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS
ASME A17.7-2007/CSA B44.7-07 (R2017) Performance-Based Safety Code for Elevators and Escalators (Bi-National standard, with ASME A17.7)
CSA B44.7 : 2007 PERFORMANCE-BASED SAFETY CODE FOR ELEVATORS AND ESCALATORS
ISO/TS 14798:2006 Lifts (elevators), escalators and moving walks Risk assessment and reduction methodology
MIL-HDBK-272 Revision A:1993 NUCLEAR WEAPONS SYSTEMS, SAFETY DESIGN AND EVALUATION CRITERIA FOR
RE.AERO 70110 : A1998 SAFETY CONSTRUCTION PRINCIPLE FOR A MISSILE OR SPACE PRODUCT
IEEE 7-4.3.2-2016 IEEE Standard Criteria for Programmable Digital Devices in Safety Systems of Nuclear Power Generating Stations
NFPA 551 : 2016 EVALUATION OF FIRE RISK ASSESSMENTS
SSPC-CPC 1 : 2016 CORROSION PREVENTION AND CONTROL PLANNING
MIL-STD-3035 Base Document:2013 DESIGN CRITERIA STANDARD - USAF AIRCRAFT ARRESTING SYSTEMS
MIL-PRF-32390 Base Document:2011 ENGAGING DEVICE, AIRCRAFT ARRESTING SYSTEM - USAF PENDANT CABLE RETRACTION SYSTEMS (PCRS)
IEEE DRAFT 1474.1 : D8.0 JUL 99 DRAFT STANDARD FOR COMMUNICATIONS-BASED TRAIN CONTROL (CBTC) PERFORMANCE AND FUNCTIONAL REQUIREMENTS
MIL S 9479 : C
MIL-W-52874 Revision B:1983 WATER QUALITY ANALYSIS SET, ENGINEER
MIL-L-52325 Revision D:1988 LAUNCHER, TRANSPORTER, BRIDGE M48A5 OR M60A1 TANK CHASSIS
DD ISO/TS 14798:2006 Lifts (elevators), escalators and moving walks. Risk assessment and reduction methodology
MIL M 4819 : D MOTOR GENERATOR, SKID MOUNTED, TYPE MD 3
DEFSTAN 00-056(PT2)/5(2017) : 2017 SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 2: GUIDANCE ON ESTABLISHING A MEANS OF COMPLYING WITH PART 1
DOD-HDBK-791 Base Document:1988 MAINTAINABILITY DESIGN TECHNIQUES
MIL-DTL-32392 Revision A:2013 AIRCRAFT ARRESTING SYSTEM - TEXTILE (TAAS)
ADS-63-SP : 2001 AERONAUTICAL DESIGN STANDARD - STANDARD PRACTICE - RADAR SYSTEM AIRWORTHINESS QUALIFICATION AND VERIFICATION REQUIREMENTS
MIL-DTL-49314 Revision B:2008 ANTENNAS, UHF, SATCOM, PORTABLE, FOLDABLE, (LIGHT WEIGHT, MEDIUM WEIGHT, AND HEAVY DUTY), GENERAL SPECIFICATION FOR
ANSI B11 TR3 : 2000 RISK ASSESSMENT AND RISK REDUCTION - A GUIDE TO ESTIMATE, EVALUATE AND REDUCE RISKS ASSOCIATED WITH MACHINE TOOLS
17/30318744 DC : 0 BS ISO 20188 - SPACE SYSTEMS - PRODUCT ASSURANCE REQUIREMENTS FOR COMMERCIAL SATELLITES
MIL-G-83380 Base Document:1979 GENERATOR SET, GAS TURBINE ENGINE DRIVEN, 30 AND 60 KW, 400 HZ
MIL-P-83126 Revision A:1980 PROPULSION SYSTEMS, AIRCREW ESCAPE, DESIGN SPECIFICATION FOR
MIL-I-8671 Revision D:1994 INSTALLATION OF DROPPABLE STORES AND ASSOCIATED RELEASE SYSTEMS
MIL-HDBK-1222 Revision F:2015 GUIDE TO THE GENERAL STYLE AND FORMAT OF U.S. ARMY WORK PACKAGE TECHNICAL MANUALS
MIL-HDBK-515 Base Document:2002 WEAPON SYSTEM INTEGRITY GUIDE (WSIG)
MIL-S-23069 Revision A:1983 SAFETY REQUIREMENTS, MINIMUM, FOR AIR LAUNCHED GUIDED MISSILES
RG.AERO 00040 : 1999 GENERAL RECOMMENDATION FOR THE PROGRAMME MANAGEMENT SPECIFICATION
MIL-STD-2067 Base Document:1978 AIRCREW AUTOMATED ESCAPE SYSTEMS RELIABILITY AND MAINTAINABILITY (R/M) PROGRAM REQUIREMENTS FOR
JSSG-2010-12 Base Document:1998 Crew Systems Deployable Aerodynamic Decelerator (DAD) Systems Handbook
MIL-E-38453 Revision A:1971 ENVIRONMENTAL CONTROL, ENVIRONMENTAL PROTECTION, AND ENGINE BLEED AIR SYSTEMS, AIRCRAFT, GENERAL SPECIFICATION FOR
DEFSTAN 00-250(PT3)SEC16/1(2008) : 2008 HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 16 - LIVING SPACES
MIL-S-48405 Base Document:1973 Shielded and Confined Mild Detonating Cord Assemblies
MIL-HDBK-514 Base Document:2003 OPERATIONAL SAFETY, SUITABILITY, & EFFECTIVENESS FOR THE AERONAUTICAL ENTERPRISE
MIL-A-0083216 Revision C:1976 AIR CONDITIONER, HORIZONTAL, 54,000 BTUH, 208/230 V
MIL A 83419 : C ALTIMETER, SERVO CONTROLLED, AUTOMATIC PRESSURE STANDBY
SAE ARP 1070E : 2019 DESIGN AND TESTING OF ANTISKID BRAKE CONTROL SYSTEMS FOR TOTAL AIRCRAFT COMPATIBILITY
ANSI/ASSE A10.17 : 2006 SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION
MIL-B-52088 Revision F:1992 BRIDGE, ARMOURED VEHICLE LAUNCHED, SCISSORING TYPE, CLASS 60, ALUMINUM, 60 FOOT SPAN
MIL-P-85573 Base Document:1983 POWER UNIT AIRCRAFT AUXILIARY, GAS TURBINE, GENERAL SPECIFICATION FOR
CEI CLC/TR 50126-2 : 2008 RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 2: GUIDE TO THE APPLICATION OF EN 50126-1 FOR SAFETY
MIL-G-70617 Revision B:1993 GUNFIRE SIMULATOR: 12725085-1
SAE ARP 5150 : 2013 SAFETY ASSESSMENT OF TRANSPORT AIRPLANES IN COMMERCIAL SERVICE
MIL-E-18927 Revision E:1983 ENVIRONMENTAL CONTROL SYSTEMS, AIRCRAFT, GENERAL REQUIREMENTS FOR
MIL B 29595 : 0 BATTERIES AND CELLS, LITHIUM, AIRCRAFT, GENERAL SPECIFICATION FOR
SAE AS 6479 : 2014 SPLICER, FUSION, FIBER OPTIC, AEROSPACE
PREN 9200 : 200P1 AEROSPACE SERIES - PROGRAMME MANAGEMENT - GUIDELINES FOR PROJECT MANAGEMENT SPECIFICATION
SAE ARP 1070 : 2014 DESIGN AND TESTING OF ANTISKID BRAKE CONTROL SYSTEMS FOR TOTAL AIRCRAFT COMPATIBILITY
ANSI/ASSE Z10 : 2012(R2017) OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS
ASTM F 1337 : 2010 Standard Practice for Human Engineering Program Requirements for Ships and Marine Systems, Equipment, and Facilities
BS EN 9200:2004 Programme management. Guidelines for project management specification
MIL-STD-1474 Revision E:2015 NOISE LIMITS
EN 9200:2004 Aerospace series - Programme management - Guidelines for project management specification
MIL-STD-1425 Revision A:1991 SAFETY DESIGN REQUIREMENTS FOR MILITARY LASERS AND ASSOCIATED SUPPORT EQUIPMENT
DEFSTAN 00-250(PT3)SEC9/1(2008) : 2008 HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 9 - PEOPLE CHARACTERISTICS
MIL A 87211 : NOTICE 1 AIR DATA SYSTEMS REQUEST FOR ISSUE OTHER THAN DOD MUST BE SENT VIA; ASD ENES, WRIGHT PATTERSON, AFB OH 45433 6503
MIL-W-81752 Revision A:1987 WINDSHIELDED SYSTEM, FIXED WING AIRCRAFT - GENERAL SPECIFICATION FOR
MIL-STD-1512 Base Document:1972 ELECTROEXPLOSIVE SUBSYSTEMS, ELECTRICALLY INITIATED, DESIGN REQUIREMENTS AND TEST METHODS
MIL-STD-1367 Revision A:1989 PACKAGING, HANDLING, STORAGE, AND TRANSPORTABILITY PROGRAM REQUIREMENTS (FOR SYSTEMS AND EQUIPMENTS)
MIL-F-8615 Revision D:1976 FUEL SYSTEM COMPONENTS, GENERAL SPECIFICATION FOR [ASG]
MIL M 4818 : D MOTOR GENERATOR, SKID MOUNTED, TYPE MD 2
MIL-S-87238 Base Document:1985 SURVIVAL AND FLOTATION SYSTEM, AIRBORNE
MIL M 87222 : 0 MECHANICAL SYSTEMS FOR AIRCRAFT DOORS AND CANOPIES
EIA 933 : 2015 REQUIREMENTS FOR A COTS ASSEMBLY MANAGEMENT PLAN
MIL-STD-1530 Revision D:2016 AIRCRAFT STRUCTURAL INTEGRITY PROGRAM (ASIP)
MIL-STD-633 Revision G:2013 STANDARD FAMILY OF MOBILE ELECTRIC POWER GENERATING SOURCES - GENERAL DESCRIPTION INFORMATION AND CHARACTERISTIC DATA
MIL-STD-40051-1 Revision C:2015 PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR INTERACTIVE ELECTRONIC TECHNICAL MANUALS (IETMS)
MIL-L-85762 Revision A:1988 LIGHTING, AIRCRAFT, INTERIOR, NIGHT VISION
MIL-HDBK-525 Base Document:2013 ELECTRICAL WIRING INTERCONNECT SYSTEM (EWIS) INTEGRITY PROGRAM
JSSG-2009 Revision A:2013 Air Vehicle Subsystems
MIL-D-18300 Revision H:1993 DESIGN EXAMINATIONS, ENGINEERING AVIONIC SYSTEMS/EQUIPMENT GENERAL REQUIREMENTS FOR
MIL-D-8708 Revision C:1991 DEMONSTRATION REQUIREMENTS FOR AIRPLANES
AIHA Z10 : 2012 OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS
ASTM F 1337 : 2010 : R2015 Standard Practice for Human Systems Integration Program Requirements for Ships and Marine Systems, Equipment, and Facilities
MIL-HDBK-1024-1 Base Document:1994 AVIATION OPERATIONAL AND SUPPORT FACILITIES
MIL STD 2084 : 0 GENERAL REQUIREMENTS FOR MAINTAINABILITY OF AVIONIC AND ELECTRONIC SYSTEMS AND EQUIPMENT
DEFSTAN 00-25(PT21)/1(2004) : 2004 HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 21: SYSTEM SAFETY DOMAIN
MIL-I-83117 Revision B:1975 INDICATOR, ANGLE OF ATTACK
MIL-C-87970 Base Document:1982 CONTROL SET, GYROSCOPE, ATTITUDE HEADING AN/ASN-129
MIL H 53076 : 1987 HEMTT TANKER AVIATION REFUELING SYSTEM (HTARS)
MIL M 4803 : D MOTOR-GENERATOR, 400 HZ PRECISE OUTPUT, GENERAL REQUIREMENTS FOR
MIL-L-85314 Revision A:1983 LIGHT SYSTEMS, AIRCRAFT, ANTI COLLISION, STROBE, GENERAL SPECIFICATION FOR
MIL-G-25591 Revision E:1981 GYROSCOPE, RATE, SWITCHING, TYPE MC-1
EIA 836 CD : B2010(R2015) CONFIGURATION MANAGEMENT DATA EXCHANGE AND INTEROPERABILITY
MIL-P-24587 Base Document:1979 POWER SUPPLY, UNINTERRUPTIBLE, SOLID STATE (NAVAL SHIPBOARD)
MIL-T-85549 Base Document:1982 Test Program Set (TPS) - Operational Test Program Sets (OTPS) For F/A-18 Units Under Test (UUT), General Specification For
MIL-M-4820 Revision E:1979 MOTOR GENERATOR, SKID MOUNTED TYPE MD 4
MIL-STD-1606 Revision A:1983 TECHNICAL INFORMATION REQUIREMENTS FOR AIR LAUNCHED GUIDED MISSILE PROPOSALS
ADS-65-HDBK : 2004 AERONAUTICAL DESIGN STANDARD - HANDBOOK - AIRWORTHINESS QUALIFICATION AND VERIFICATION GUIDANCE FOR ELECTRO-OPTICAL AND SENSOR SYSTEMS
MIL A 49314 : 0 ANTENNAS, UHF SATCOM, PORTABLE, FOLDABLE (LIGHT WEIGHT, MEDIUM WEIGHT & HEAVY DUTY), GENERAL SPECIFICATION FOR
MIL-PRF-32470 Base Document:2013 TRUCK, FORKLIFT, 10,000 LB CAPACITY, VARIABLE REACH, ROUGH TERRAIN
MIL-P-85767 Base Document:1986 PROJECTILE, 20 MILLIMETER, TARGET PRACTICE PGU-27/B
MIL-STD-2105 Revision D:2011 HAZARD ASSESSMENT TESTS FOR NON-NUCLEAR MUNITIONS
MIL-W-5013 Revision L:1991 WHEEL AND BRAKE ASSEMBLIES - AIRCRAFT, GENERAL SPECIFICATION FOR
MIL-T-81821 Base Document:1969 TRAINERS, MAINTENANCE, EQUIPMENT AND SERVICES GENERAL SPECIFICATION FOR
MIL-A-85434 Revision A:1983 AMPLIFIER, TRAVELING WAVE TUBE AM-6937/DLQ-3B
ANSI/ASSE Z244.1 : 2016 THE CONTROL OF HAZARDOUS ENERGY LOCKOUT, TAGOUT AND ALTERNATIVE METHODS
DEFSTAN 00-250(PT1)/1(2008) : 2008 HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 1: OVERARCHING PEOPLE-RELATED REQUIREMENTS
MIL-D-52842 Revision A:1981 DRIER, X-RAY, FILM FORCED AIR, WALL MOUNTED
SAE ARP 5794 : 2014 CENTRIFUGAL AIRCRAFT FUEL PUMP REQUIREMENTS, DESIGN AND TESTING, AEROSPACE STANDARD
ANSI/ASSE A10.17 : 2006 : R2011 SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION
SAE ARP 4943 : 2008 GROUND SUPPORT EQUIPMENT HYDRAULIC SYSTEMS, DESIGN AND INSTALLATION, RECOMMENDED PRACTICES FOR
SAE ARP 1595 : 2013(R2019) DESIGN AND VERIFICATION OF AIRCRAFT NOSE WHEEL STEERING SYSTEMS
ISO/TS 18667:2018 Space systems — Capability-based Safety, Dependability, and Quality Assurance (SD&QA) programme management
SAE ARP 94910 : 2012 AEROSPACE - VEHICLE MANAGEMENT SYSTEMS - FLIGHT CONTROL DESIGN, INSTALLATION AND TEST OF, MILITARY UNMANNED AIRCRAFT, SPECIFICATION GUIDE FOR
SAE ARP 5415 : 2008 USER'S MANUAL FOR CERTIFICATION OF AIRCRAFT ELECTRICAL/ELECTRONIC SYSTEMS FOR THE INDIRECT EFFECTS OF LIGHTNING
SAE ARP6128:2013 UNMANNED SYSTEMS TERMINOLOGY BASED ON THE ALFUS FRAMEWORK
AAS3P-11 : 2017 SAFETY AND SUITABILITY FOR SERVICE ASSESSMENT TESTING FOR SURFACE AND UNDERWATER LAUNCHED MUNITIONS
AAS3P-10 : 2011 SAFETY AND SUITABILITY FOR SERVICE ASSESSMENT TESTING FOR SHOULDER LAUNCHED MUNITIONS
DI-MISC-81397 Revision C:2014 HAZARDOUS MATERIALS MANAGEMENT PROGRAM (HMMP) REPORT
ASME Y14.100 : 2017 ENGINEERING DRAWING PRACTICES - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES

AOP 52 : 2016 GUIDANCE ON SOFTWARE SAFETY DESIGN AND ASSESSMENT OF MUNITION-RELATED COMPUTING SYSTEMS

View more information
US$20.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.