• There are no items in your cart

NEMA 250 : 2014

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

ENCLOSURES FOR ELECTRICAL EQUIPMENT (1000 VOLTS MAXIMUM)
Superseded date

02-17-2020

Published date

12-06-2012

1 GENERAL
2 ENCLOSURE TYPES, FEATURES, AND APPLICATIONS
3 CONSTRUCTION
4 MARKING 15
5 DESIGN TESTS
Annex A - Comparison Between NEMA Enclosure
          Type Numbers and ANSI/IEC Enclosure
          Classification Designations
Annex B - Descriptions, Applications, Features, and
          Test Criteria of Enclosures for Hazardous
          (Classified) Locations

Describes the requirements to provide protection to the enclosed equipment against specific environmental conditions.

DocumentType
Standard
PublisherName
National Electrical Manufacturers Association
Status
Superseded
SupersededBy

NFPA 654 : 2017 PREVENTION OF FIRE AND DUST EXPLOSIONS FROM THE MANUFACTURING, PROCESSING, AND HANDLING OF COMBUSTIBLE PARTICULATE SOLIDS
API STD 541 : 2014 FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER
API 670 : 2014 MACHINERY PROTECTION SYSTEMS
EN ISO 13631:2002 Petroleum and natural gas industries - Packaged reciprocating gas compressors (ISO 13631:2002)
A-A-50304 Base Document:1987 DYNAMOMETER, ENGINE RUN-IN, 500 HORSEPOWER CAPACITY
MIL-PRF-32098 Revision A:2004 ULTRAFILTRATION SYSTEM, 10-GALLON PER MINUTE OILY WASTE MEMBRANE (OWMS-10)
ASME A17.1 : 2016 SAFETY CODE FOR ELEVATORS AND ESCALATORS - INCLUDES REQUIREMENTS FOR ELEVATORS, ESCALATORS, DUMBWAITERS, MOVING WALKS, MATERIAL LIFTS, AND DUMBWAITERS WITH AUTOMATIC TRANSFER DEVICES
MIL-PRF-30099 Revision A:2011 TREATMENT SYSTEM, BLACKWATER AND COMBINED BLACKWATER/GRAYWATER, FOR SURFACE SHIPS
MIL-PRF-53051 Revision C:2017 PUMPING ASSEMBLIES, WHEEL-MOUNTED, DIESEL ENGINE DRIVEN, BULK TRANSFER, FUEL AND POTABLE WATER PUMPING SERVICE
MIL-PRF-32007 Base Document:2003 OILY WASTEWATER SEPARATION SYSTEM, 6.7-GALLON PER MINUTE NAVY INTEGRATED MEMBRANE SYSTEM (NIMS)
IEEE 1585 : 2002 FUNCTIONAL SPECIFICATION OF MEDIUM VOLTAGE (1-35 KV) ELECTRONIC SERIES DEVICES FOR COMPENSATION OF VOLTAGE FLUCTUATIONS
ANSI/AWWA D107-16 ERR 1(CSV) COMPOSITE ELEVATED TANKS FOR WATER STORAGE
AWWA C542 : 2016 ELECTRIC MOTOR ACTUATORS FOR VALVES AND SLIDE GATES
API 616 : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API 619 : 2010 ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
EN 62026-3:2015 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet
API 672 : 2004 PACKAGED, INTEGRALLY GEARED CENTRIFUGAL AIR COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API 613:2003 SPECIAL PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
MIL-PRF-32236 Base Document:2007 GENERATOR, CHLORINE PORTABLE ELECTROLYTIC (PECG)
API 677 : 2006 : R2010 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
IEEE 241 : 1990 ELECTRIC POWER SYSTEMS IN COMMERCIAL BUILDINGS
API 677 :2006 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
AWWA C670 : 2015 ONLINE CHLORINE ANALYZER OPERATION AND MAINTENANCE
API 611 : 2008 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
BS EN 62040-1 : 2008 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS
API 14FZ : 2013 RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS
SAE ARP 1804 : 2017 ELECTRIC BAGGAGE/CARGO TRACTOR
A-A-59472 Base Document:1999 TUMBLER, DRYING, LAUNDRY (NAVAL SUBMARINE)
A-A-59469 Base Document:1999 Washer-Extractor, Laundry, 35 to 200 Pound Capacity (Naval Shipboard)
API 682 : 2014 PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS
API 677 : 2006 : R2016 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
API 682 CHINESE : 2014 PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS
API 14F : 2008 : R2013 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
AWWA F110 : 2016 ULTRAVIOLET DISINFECTION SYSTEMS FOR DRINKING WATER
A-A-59713 Revision A:2004 COMBINATION OVEN, ELECTRIC
MIL-PRF-32017 Base Document:1997 REFRIGERATION SYSTEM, ADVANCED DESIGN
A-A-59393 Base Document:2000 MILLING MACHINE, VERTICAL MULTISPINDLE, DOUBLE COLUMN, COMPUTER NUMERICAL CONTROL (CNC)
ASHRAE GUIDELINE 13 : 2014 SPECIFYING BUILDING AUTOMATION SYSTEMS
IEEE/ANSI N42.38-2015 American National Standard for Performance Criteria for Spectroscopy-Based Portal Monitors Used in Homeland Security
A-A-59188 Base Document:1998 Refrigerator, Mechanical, Storage Stand (for Bulk Milk Dispensers) (Naval Shipboard)
ASHRAE 90.4 : 2016 ENERGY STANDARD FOR DATA CENTERS
EN 62040-1:2008/A1:2013 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS (IEC 62040-1:2008/A1:2013)
MIL-DTL-2036 Revision E:2014 ENCLOSURES FOR ELECTRIC AND ELECTRONIC EQUIPMENT, NAVAL SHIPBOARD
API 551 : 2016 PROCESS MEASUREMENT
MIL-PRF-32167 Revision A:2006 TRANSIENT VOLTAGE SURGE SUPPRESSOR (TVSS)
EN ISO 21049:2004 Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004)
IEEE C93.4-2012 IEEE Standard for Power-Line Carrier Line-Tuning Equipment (30 kHz to 500 kHz) Associated with Power Transmission Lines
A-A-59471 Base Document:1999 Dry Cleaning Presses and Finishing Equipment (Naval Shipboard)
API 611 : 2008 : R2014 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
MIL-PRF-43891 Revision C:1997 REFRIGERATION UNITS, ELECTRIC, 9000 BTU FOR MILITARY VAN CONTAINER, REFRIGERATED, INSULATED
API 673 : 2014 CENTRIFUGAL FANS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
NFPA 79 : 2018 ELECTRICAL STANDARD FOR INDUSTRIAL MACHINERY
EN ISO 10438-1:2007 Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements (ISO 10438-1:2007)
API 614 : 2008 LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES
API 14F:2008 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
EN ISO 23553-1:2014 Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014)
MIL-PRF-32335 Base Document:2010 TRICON REFRIGERATED CONTAINER SYSTEM (TRCS)
UNI EN ISO 23553-1 : 2014 SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES
A-A-59187 Base Document:1998 RANGE, CONVECTION OVEN, ELECTRIC, MODULAR (NAVAL SHIPBOARD)
EN ISO 10440-1:2007 Petroleum, petrochemical and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors (ISO 10440-1:2007)
A-A-59186 Base Document:1998 WELL, HOT FOOD STORAGE, ELECTRIC (NAVAL SHIPBOARD)
MIL-M-29190 Revision A:1986 MONITORING DEVICES, EMISSION, STACK RELATED
A-A-59777 Revision A:2009 DRY FILTER UNIT
ASTM F 1837M : 1997 : R2002 Standard Specification for Heat-Shrink Cable Entry Seals (Metric)
ASTM F 1837M : 1997 : R2007 Standard Specification for Heat-Shrink Cable Entry Seals (Metric)
NEMA ICS 7 : 2014 INDUSTRIAL CONTROL AND SYSTEMS: ADJUSTABLE - SPEED DRIVES
NEMA ICS 4:2015 Application Guideline for Terminal Blocks
ASTM E 2513 : 2007 : R2012 Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems
NEMA ICS 20:2009 (R2015) Informational Guide to Electrical Industrial Topics
UFC 3-430-11 : 2001 UNIFIED FACILITIES CRITERIA - BOILER CONTROL SYSTEMS
ASTM F 2363/F2363M : 2017 : REDLINE Standard Specification for Sewage and Graywater Flow Through Treatment Systems
ISO 13631:2002 Petroleum and natural gas industries Packaged reciprocating gas compressors
NEMA KS 3:2010 Guidelines for Inspection and Preventive Maintenance of Switches Used in Commercial and Industrial Applications
PD IEC/TR 61439-0:2013 Low-voltage switchgear and controlgear assemblies Guidance to specifying assemblies
ANSI C12.7-2014 American National Standard for Requirements for Watthour Meter Sockets
NEMA ICS 61800-2:2005 Adjustable Speed Electrical Power Drive Systems, Part 2: General Requirements—Rating Specifications for Low Voltage Adjustable Frequency AC Power Drive Systems
B354.9-17 Design, calculations, safety requirements, and test methods for mast climbing work platforms (MCWPs)
NEMA SM 24-1991 (R1997, R2002) LAND BASED STEAM TURBINE GENERATOR SETS 0 TO 33,000 kW
NEMA PB 1:2011 Panelboards
NEMA KS 1:2013 Heavy Duty Enclosed and Dead-Front Switches (600 Volts Maximum)
NEMA ICS 18:2001 (R2007) INDUSTRIAL CONTROL AND SYSTEMS: MOTOR CONTROL CENTERS
IEEE 1623-2004 IEEE Guide for the Functional Specification of Medium Voltage (1 kV - 35 kV) Electronic Shunt Devices for Dynamic Voltage Compensation
ISO 21049:2004 Pumps Shaft sealing systems for centrifugal and rotary pumps
ASTM F 2072 : 2014 : REDLINE Standard Test Method for Hosedown of a Membrane Switch
ASTM F 1837M : 1997 Standard Specification for Heat-Shrink Cable Entry Seals (Metric)
C9-17 Dry-type transformers
ASTM F 1895 : 2014 : REDLINE Standard Test Method for Submersion of a Membrane Switch
NEMA ICS 3:2005 (R2010) INDUSTRIAL CONTROL AND SYSTEMS: MEDIUM VOLTAGE CONTROLLERS RATED 2001 TO 7200 VOLTS AC
ASTM E 2484 : 2008 Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices
IEEE C37.21-2005 IEEE Standard for Control Switchboards
API 552 : 1994 TRANSMISSION SYSTEMS
ANSI C93.4 : 2012 REQUIREMENTS FOR LINE TUNING UNITS
ASTM E 3137/E3137M : 2017 Standard Specification for Heat Meter Instrumentation
NEMA ST 20:2014 Dry Type Transformers for General Applications
IEC TR 61439-0:2013 Low-voltage switchgear and controlgear assemblies - Part 0: Guidance to specifying assemblies
NEMA ICS 7.2 : 2015 APPLICATION GUIDE FOR AC ADJUSTABLE SPEED DRIVE SYSTEMS
ASTM E 2513 : 2007 Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems
ASTM F 1837M : 1997 : R2012 : EDT 1 Standard Specification for Heat-Shrink Cable Entry Seals (Metric)
NEMA ICS 3.1 : 2009(R2014) GUIDE FOR THE APPLICATION, HANDLING, STORAGE, INSTALLATION, AND MAINTENANCE OF MEDIUM-VOLTAGE AC CONTACTORS, CONTROLLERS, AND CONTROL CENTERS
DIN EN ISO 23553-1:2014-09 Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014); German version EN ISO 23553-1:2014
ASTM C 1217 : 2000 Standard Guide for Design of Equipment for Processing Nuclear and Radioactive Materials
ISO 23553-1:2014 Safety and control devices for oil burners and oil-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves
UNE-EN ISO 23553-1:2014 Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014)
NEMA 280 : 1990 APPLICATION GUIDE FOR GROUND FAULT CIRCUIT INTERRUPTERS
IEC 62026-3:2014 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet
IEEE 515.1-2012 IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Commercial Applications
ANSI/NEMA KS 2:2013 Distribution Equipment Switch Application Guide, A User\'s Reference
ASME A17.1-2016/CSA B44-16 Safety code for elevators and escalators (Bi-national standard, with ASME A17.1)
NEMA ICS 6-1993 (R2006) Industrial Control and Systems: Enclosures
ISO/IEC TR 24729-3:2009 Information technology Radio frequency identification for item management Implementation guidelines Part 3: Implementation and operation of UHF RFID Interrogator systems in logistics applications
CSA ISO/IEC TR 24729-3:14 (R2019) Information technology - Radio frequency identification for item management - Implementation guidelines - Part 3: Implementation and operation of UHF RFID Interrogator systems in logistics applications (Adopted ISO/IEC TR 24729-3:2009, first edition, 2009-05-15)
FM 3615 : 2018 EXPLOSIONPROOF ELECTRICAL EQUIPMENT GENERAL REQUIREMENTS
BS EN ISO 23553-1:2014 Safety and control devices for oil burners and oil-burning appliances. Particular requirements Automatic and semi-automatic valves
NEMA ICS 1.3:1986 (R2001, R2009, R2015) Preventive Maintenance of Industrial Control and Systems Equipment
NEMA ICS 14:2015 Application Guide for Electric Fire Pump Controllers
NEMA PB 2:2011 Deadfront Distribution Switchboards
ASTM E 2484 : 2008 : R2015 Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices (Withdrawn 2024)
NEMA ICS 9 : 1993 INDUSTRIAL CONTROL AND SYSTEMS: POWER CIRCUIT ACCESSORIES
NEMA ICS 16:2001 Motion/Position Control Motors, Controls and Feedback Devices
BS EN 62026-3:2015 Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs) DeviceNet
ANSI C136.40:2014 American National Standard for Roadway and Area Lighting Equipment—Solar Lighting Systems
ASTM C 1217 : 2000 : R2006 Standard Guide for Design of Equipment for Processing Nuclear and Radioactive Materials
BS EN ISO 21049:2004 Pumps. Shaft sealing systems for centrifugal and rotary pumps
NEMA ICS 61800-1:2002(R2007) Adjustable Speed Electrical Power Drive Systems, Part 1: General Requirements—Rating Specifications for Low Voltage Adjustable-Speed DC Power Drive Systems
BS EN ISO 10438-1:2003 Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries General requirements
B354.12-17 Design, calculations, safety requirements, and test methods for mast climbing transport platforms (MCTPs)
BS EN ISO 13631:2002 Petroleum and natural gas industries. Packaged reciprocating gas compressors
ISO 23551-1:2012 Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves
UFC 4-211-01 : Change 1 UNIFIED FACILITIES CRITERIA - AIRCRAFT MAINTENANCE HANGARS
ISO 10440-1:2007 Petroleum, petrochemical and natural gas industries — Rotary-type positive-displacement compressors — Part 1: Process compressors
NEMA PR 4 : 83(R1989) PLUGS, RECEPTACLES, AND CABLE CONNECTORS OF THE PIN AND SLEEVE TYPE FOR INDUSTRIAL USE
ISO 10438-1:2007 Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 1: General requirements
ANSI/NEMA FB 11-2000 PLUGS, RECEPTACLES AND CONNECTORS OF THE PIN AND SLEEVE TYPE FOR HAZARDOUS LOCATIONS
ASTM C 1217 : 2000 : R2012 Standard Guide for Design of Equipment for Processing Nuclear and Radioactive Materials
ANSI/NEMA AB 3:2013 Molded-Case Circuit Breakers and Their Application
BS EN ISO 10440-1:2001 Petroleum and natural gas industries. Rotary-type positive-displacement compressors Process compressors (oil-free)
NEMA AB 1 Molded-Case Circuit Breakers, Molded Case Switches, and Circuit-Breaker Enclosures
IEEE 1653.1-2016 IEEE Standard for Traction Power Rectifier Transformers for Substation Applications up to 1500 V DC Nominal Output
IEEE 1909.1-2014 IEEE Recommended Practice for Smart Grid Communications Equipment -- Test Methods and Installation Requirements
API 619 REDLINE : 2010 ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
IEEE 1827-2016 IEEE Guide for Electrical and Control Design of Hydroelectric Water Conveyance Facilities
IEEE C37.016-2006 IEEE Standard for AC High Voltage Circuit Switchers rated 15.5kV through 245kV
API 616 REDLINE : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
IEEE 2030.2-2015 IEEE Guide for the Interoperability of Energy Storage Systems Integrated with the Electric Power Infrastructure
API 14F REDLINE : 2008 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
IEEE/ANSI N42.43-2006 American National Standard Performance Criteria for Mobile and Transportable Radiation Monitors Used for Homeland Security
IEEE 3001.11-2017 IEEE Recommended Practice for Application of Controllers and Automation to Industrial and Commercial Power Systems
IEEE 1818-2017 IEEE Guide for the Design of Low-Voltage Auxiliary Systems for Electric Power Substations
IEEE/ANSI N42.35-2006 American National Standard Evaluation and Performance of Radiation Detection Portal Monitors for Use in Homeland Security
API 611 REDLINE : 2008 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
IEEE C57.148-2011 IEEE Standard for Control Cabinets for Power Transformers

ASME B1.20.1 : 2013(R2018) PIPE THREADS, GENERAL PURPOSE (INCH)

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.