SAE AS23053
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Insulation Sleeving, Electrical, Heat Shrinkable, General Specification For
Hardcopy , PDF
English
10-16-2016
04-11-2019
1. SCOPE
2. REFERENCES
3. REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. TEST METHODS
6. PACKAGING
7. NOTES
Sets up the requirements for various types and colors of electrical insulating sleeving that will shrink to a predetermined size upon the application of heat.
| DevelopmentNote |
Supersedes SAE AMS DTL 23053. (10/2016)
|
| DocumentType |
Standard
|
| Pages |
23
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This specification establishes the requirements for various types and colors of electrical insulating sleeving that will shrink to a predetermined size upon the application of heat. This specification includes provisions for demonstrating compliance with qualification requirements (see Section 4 and 7.3), in process inspection, and statistical process control inspections (see 4.4). The continuous operating temperature ranges for the sleeving classes covered by this specification are from -112 to +482 °F (-80 to +250 °C). The continuous operating temperature range for each sleeving class is given in the applicable detail specification.
| SAE AS81824D | Splice, Electric, Crimp, Copper, Environment Resistant |
| MIL-DTL-23053-8 Revision C:1996 | Insulation Sleeving, Electrical, Heat Shrinkable, Polyvinylidene Fluoride, Semi-Rigid, Crosslinked (S/S by SAE-AMS-DTL-23053/8) |
| SAE AS23053/5 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYOLEFIN, FLEXIBLE, CROSSLINKED |
| SAE AMS1424M | Deicing/Anti-Icing Fluid, Aircraft SAE Type 1 |
| FED-STD-228 Revision A:2014 | Test Methods for Cables and Wire, Insulated |
| MIL-I-23053-3 Revision A:1976 | Insulation Sleeving, Electrical, Heat Shrinkable, Polyvinyl Chloride, Semi Rigid, Crosslinked and Non-Crosslinked (S/S by SAE-AMS-I-23053/3) |
| MIL-DTL-23053-14 Revision B:1996 | Insulation Sleeving, Electrical, Heat Shrinkable, Ethylene-Tetrafluoroethylene Fluoropolymer, Semi-Rigid (S/S by SAE-AMS-DTL-23053/14) |
| MIL-DTL-23053-17 Revision B:1996 | Insulation Sleeving, Electrical, Heat Shrinkable, Flame Retarded, Modified Polyolefin, Flexible, Crosslinked (S/S by SAE-AMS-DTL-25053/17) |
| SAE AS23053/12 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE POLYTETRAFLUOROETHYLENE |
| MIL-DTL-23053-10 Revision D:1996 | Insulation Sleeving, Electrical, Heat Shrinkable, Silicone Rubber, Flexible (S/S by SAE-AMS-DTL-23053/10) |
| MIL-DTL-23053-18 Revision B:1996 | Insulation Sleeving, Electrical, Heat Shrinkable, Modified Fluoropolymer, Crosslinked (S/S by SAE-AMS-DTL-23053/18) |
| MIL-DTL-23053-7 Revision C:1996 | Insulation Sleeving, Electrical, Heat Shrinkable, Polyethylene Terephthalate, Non-Crosslinked (S/S by SAE-AMS-DTL-23053/7) |
| ASTM G 21 : 2015 : REDLINE | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
| MIL-PRF-7808 Revision L:1997 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| MIL-PRF-5606 Revision H:2002 | Hydraulic Fluid, Petroleum Base; Aircraft, Missile, and Ordnance |
| A-A-694 Revision E:2013 | Sodium Chloride, Technical |
| MIL-DTL-23053-13 Revision B:1996 | Insulation Sleeving, Electrical, Heat Shrinkable, Fluoroelastomer, Flexible (S/S by SAE-AMS-DTL-23053/13) |
| MIL-DTL-23053-15 Revision B:1996 | Insulation Sleeving, Electrical, Heat Shrinkable, Polyolefin, Heavy-Wall, Coated, Flexible, Outer Wall Crosslinked (S/S by SAE-AMS-DTL-23053/15) |
| SAE AS23053/8 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYVINYLIDENE FLUORIDE, SEMIRIGID, CROSSLINKED |
| ASTM D 792 : 2013 : REDLINE | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
| SAE AMSI23053/3 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYVINYL CHLORIDE, SEMI RIGID, CROSSLINKED AND NON-CROSSLINKED |
| ISO 846:1997 | Plastics — Evaluation of the action of microorganisms |
| SAE AS23053/4 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYOLEFIN 1/, DUAL-WALL, OUTER WALL CROSSLINKED |
| SAE AS23053/10 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, SILICONE RUBBER, FLEXIBLE |
| MIL-I-23053-2 Revision C:1976 | Insulation Sleeving, Electrical, Heat Shrinkable, Polyvinyl Chloride, Flexible, Crosslinked and Non-Crosslinked (S/S by SAE-AMS-I-23053/2) |
| MIL I 23053/9 : LATEST | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, FLUOROSILICONE RUBBER, FLEXIBLE |
| SAE AS23053/11 | INSULATION SLEEVING, ELECTRICAL, HEAT-SHRINKABLE FLUORINATED ETHYLENE PROPYLENE, NON-CROSSLINKED |
| MIL-DTL-23053-16 Revision B:1996 | Insulation Sleeving, Electrical, Heat Shrinkable, Crosslinked, Elastomeric Polyolefin, Flexible (S/S by SAE-AMS-DTL-23053/16) |
| MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
| MIL I 23053 : D | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE MODIFIED FLUOROPOLYMER, CROSSLINKED |
| SAE AMSI23053/2 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYVINYL CHLORIDE, FLEXIBLE, CROSSLINKED AND NON-CROSSLINKED |
| MIL-DTL-23053-5 Revision C:1996 | Insulation Sleeving, Electrical, Heat Shrinkable, Polyolefin, Flexible, Crosslinked (S/S by SAE-AMS-DTL-23053/5) |
| MIL-DTL-23053-11 Revision C:1996 | Insulation Sleeving, Electrical, Heat Shrinkable, Fluorinated Ethylene Propylene, Non-Crosslinked (S/S by SAE-AMS-DTL-23053/11) |
| MIL-DTL-83133 Revision J:2015 | Turbine Fuel, Aviation, Kerosene Type, JP-8 (NATO F-34) and NATO F-35 |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| ISO 9001:2015 | Quality management systems — Requirements |
| ASTM D 876 : 2013 : REDLINE | Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation |
| MIL-DTL-23053-12 Revision C:1996 | Insulation Sleeving, Electrical, Heat Shrinkable, Polytetrafluoroethylene (S/S by SAE-AMS-DTL-23053/12) |
| MIL-DTL-23053-1 Revision C:1996 | Insulation Sleeving, Electrical, Heat Shrinkable, Crosslinked Chlorinated Polyolefin, Flexible (S/S by SAE-AMS-DTL-23053/1) |
| SAE AS23053/1 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, CROSSLINKED CHLORINATED POLYOLEFIN, FLEXIBLE |
| ASTM D 570 : 1998 : R2018 | Standard Test Method for Water Absorption of Plastics |
| MIL-DTL-23053-6 Revision D:1996 | Insulation Sleeving, Electrical, Heat Shrinkable, Polyolefin, Semi-Rigid, Crosslinked (S/S by SAE-AMS-DTL-23053/6) |
| MIL-STD-104 Revision C:1986 | Limit for Electrical Insulation Color |
| SD 6 : 20140201 | PROVISIONS GOVERNING QUALIFICATION: QUALIFIED PRODUCTS LIST AND QUALIFIED MANUFACTURERS LISTS |
| ASTM D 638 : 2014 : REDLINE | Standard Test Method for Tensile Properties of Plastics |
| MIL-DTL-23053-4 Revision D:1996 | Insulation Sleeving, Electrical, Heat Shrinkable, Polyolefin, Dual-Wall, Outer Wall Crosslinked (S/S by SAE-AMS-DTL-23053/4) |
| ASTM D 2671 : 2013 | Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use |
| ASTM D 746 : 2014 : REDLINE | Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact |
| MIL-DTL-23053 Revision E:1996 | Insulation Sleeving, Electrical, Heat Shrinkable, General Specification for (S/S by SAE-AMS-DTL-23053) |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.