• There are no items in your cart

SAE J 1211 : 2012

Current
Current

The latest, up-to-date edition.

HANDBOOK FOR ROBUSTNESS VALIDATION OF AUTOMOTIVE ELECTRICAL/ELECTRONIC MODULES
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2012

1. SCOPE
2. REFERENCES
3. DEFINITIONS
4. DEFINITION AND DESCRIPTION OF ROBUSTNESS VALIDATION
5. INFORMATION AND COMMUNICATION FLOW
6. MISSION PROFILE
7. KNOWLEDGE MATRIX FOR SYSTEMIC FAILURES
8. ANALYSIS, MODELING AND SIMULATION (AMS)
9. INTELLIGENT TESTING
10. MANUFACTURING PROCESS ROBUSTNESS AND ITS EVALUATION
11. ROBUSTNESS INDICATOR FIGURE (RIF)
12. NOTES
APPENDIX A - SECTION EXAMPLES
APPENDIX B - PROTOTYPE TEST EXAMPLES

Describes robustness of electrical/electronic modules for use in automotive applications.

DocumentType
Revision
Pages
126
PublisherName
SAE International
Status
Current
Supersedes

SAE J 1850 : 2015 CLASS B DATA COMMUNICATIONS NETWORK INTERFACE
SAE J 2685 : 2014 POSITIVE TEMPERATURE COEFFICIENT OVERCURRENT PROTECTION DEVICES (PTCS)
SAE J 994 : 2014 ALARM - BACKUP - ELECTRIC LABORATORY PERFORMANCE TESTING
SAE J 1879 : 2014 HANDBOOK FOR ROBUSTNESS VALIDATION OF SEMICONDUCTOR DEVICES IN AUTOMOTIVE APPLICATIONS
SAE J 2954 : 2017 WIRELESS POWER TRANSFER FOR LIGHT-DUTY PLUG-IN/ELECTRIC VEHICLES AND ALIGNMENT METHODOLOGY
IEEE 1609.0-2013 IEEE Guide for Wireless Access in Vehicular Environments (WAVE) - Architecture
SAE J3168:2021 Reliability Physics Analysis of Electrical, Electronic, and Electromechanical Equipment, Modules and Components
EN 303 980 : 1.1.1 SATELLITE EARTH STATIONS AND SYSTEMS (SES); HARMONISED STANDARD FOR FIXED AND IN-MOTION EARTH STATIONS COMMUNICATING WITH NON-GEOSTATIONARY SATELLITE SYSTEMS (NEST) IN THE 11 GHZ TO 14 GHZ FREQUENCY BANDS COVERING ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF DIRECTIVE 2014/53/EU
16/30320025 DC : 0 BS ISO 26262-1 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 1: VOCABULARY
SAE J 1625 : 2004 HEAVY-DUTY CIRCUIT BREAKERS
SAE AS 5116 : 2003 MINIMUM OPERATIONAL PERFORMANCE SPECIFICATION FOR GROUND ICE DETECTION SYSTEMS
SAE J 2628 : 2013 CHARACTERIZATION, CONDUCTED IMMUNITY
CSA Z617 : 2006 PERSONAL PROTECTIVE EQUIPMENT (PPE) FOR BLUNT TRAUMA
CSA Z617 : 2006 : R2011 PERSONAL PROTECTIVE EQUIPMENT (PPE) FOR BLUNT TRAUMA
CSA Z617 : 2006 PERSONAL PROTECTIVE EQUIPMENT (PPE) FOR BLUNT TRAUMA
SAE J 2848/3 : 2012 TIRE PRESSURE SYSTEMS - MANAGEMENT (CTIS) TYPE - MEDIUM AND HEAVY DUTY TRUCKS
SAE J 2671 : 2004 REDUCED EFFORT BRAKES AND REDUCED EFFORT VACUUM POWERED BRAKE BACKUP SYSTEMS
SAE J 2657 : 2004 TIRE PRESSURE MONITORING SYSTEMS FOR LIGHT DUTY HIGHWAY VEHICLES
SAE J 2357 : 2012 APPLICATION GUIDELINES FOR ELECTRONICALLY DRIVEN AND/OR CONTROLLED EXTERIOR AUTOMOTIVE LIGHTING EQUIPMENT
SAE J 2282 : 2011 DISTRIBUTED LIGHTING SYSTEMS (DLS)
SAE J 1455 : 2017 RECOMMENDED ENVIRONMENTAL PRACTICES FOR ELECTRONIC EQUIPMENT DESIGN IN HEAVY-DUTY VEHICLE APPLICATIONS
SAE J 1938 : 2015 PRODUCT DEVELOPMENT PROCESS AND CHECKLIST FOR VEHICLE ELECTRONIC SYSTEMS
SAE AS 5681 : 2016 MINIMUM OPERATIONAL PERFORMANCE SPECIFICATION FOR REMOTE ON-GROUND ICE DETECTION SYSTEMS
SAE J553 : 2016 CIRCUIT BREAKERS

IEC 61025:2006 Fault tree analysis (FTA)
SAE J 1213/2 : 1988 GLOSSARY OF RELIABILITY TERMINOLOGY ASSOCIATED WITH AUTOMOTIVE ELECTRONICS
IEC 60812:2006 Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
MIL-STD-810 Revision G:2008 ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
SAE J 1879 : 2014 HANDBOOK FOR ROBUSTNESS VALIDATION OF SEMICONDUCTOR DEVICES IN AUTOMOTIVE APPLICATIONS
SAE J 1739 : 2009 POTENTIAL FAILURE MODE AND EFFECTS ANALYSIS IN DESIGN (DESIGN FMEA), POTENTIAL FAILURE MODE AND EFFECTS ANALYSIS IN MANUFACTURING AND ASSEMBLY PROCESSES (PROCESS FMEA)
IEC 60300-3-1:2003 Dependability management - Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology
IEC 60300-1:2014 Dependability management - Part 1: Guidance for management and application
IEC 60300-3-9:1995 Dependability management - Part 3: Application guide - Section 9: Risk analysis of technological systems
ISO 21747:2006 Statistical methods Process performance and capability statistics for measured quality characteristics
SAE J 2628 : 2013 CHARACTERIZATION, CONDUCTED IMMUNITY

View more information
US$197.06
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.