VDI 2083 Blatt 9.2:2017-01
Current
The latest, up-to-date edition.
Cleanroom technology - Consumables in the cleanroom
Hardcopy , PDF
German - English
01-01-2017
Preliminary note
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviations
5 Basic requirements
6 Differentiation between cleanroom compatibility
And compatibility with the required
cleanliness and basic considerations
7 Gloves
8 Multiple-use clothing
9 Single-use clothing
10 Single-use face masks
process-specific requirements
11 Shoes
12 Wipes
13 Swabs
14 Mop systems
15 Papers and notebooks
16 Packaging materials (bags, films)
Annex A - Measurement methods
A1 - Gloves
A2 - Multiple-use cleanroom clothing
A3 - Single-use face mask
A4 - Cleanroom shoes/overshoes
A5 - Wipes
A6 - Paper
A7 - Packaging materials
Annex B - Parameters of consumables -Recommendations
B1 - Single-use gloves
B2 - Outer cleanroom garments
B3 - Face masks
B4 - Wipes
B5 - Swabs
B6 - Paper
Annex C - Criteria for selection of
cleanroom textiles
C1 - Retention efficiency for
airborne particles
C2 - Air permeability
C3 - Migration behaviour (with respect to
intermediate garments)
C4 - Test method to determine the resistance
to dry and wet bacterial penetration
C5 - Wearing comfort
C6 - Electrostatic behaviour
C7 - Abrasion resistance and roughening
tendency
C8 - Style of cleanrm clothing
C9 - Recommendations for specifying
cleanrm clothing for a desired
particulate air cleanliness class
Annex D - Cleanroom-compatible decontamination
of multiple-use cleanroom
clothing and monitoring of
decontamination, sterilisation
D1 - General
D2 - Design and dimensioning of the
decontamination process
D3 - Requirements to be met by detergents
for multiple-use cleanrm clothing
D4 - Sterilisation
Annex E - Barrier properties of
single-use clothing
Bibliography
Specifies the basic properties of the Product types mentioned in terms of their use in a controlled environment as well as the cleanliness-related properties and how to test them.
DevelopmentNote |
Supersedes VDI 2083-5-2. (01/2017)
|
DocumentType |
Standard
|
Pages |
116
|
PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
Status |
Current
|
Supersedes |
SEMI E78 : 2012 | GUIDE TO ASSESS AND CONTROL ELECTROSTATIC DISCHARGE (ESD) AND ELECTROSTATIC ATTRACTION (ESA) FOR EQUIPMENT |
ISO 13934-1:2013 | Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method |
DIN EN ISO 4628-1:2016-07 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 1: GENERAL INTRODUCTION AND DESIGNATION SYSTEM (ISO 4628-1:2016) |
EN ISO 4628-2:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016) |
ISO 11137-1:2006 | Sterilization of health care products Radiation Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices |
EN ISO 22610:2006 | Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment - Test method to determine the resistance to wet bacterial penetration (ISO 22610:2006) |
DIN EN ISO 14644-1:2016-06 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 1: CLASSIFICATION OF AIR CLEANLINESS BY PARTICLE CONCENTRATION (ISO 14644-1:2015) |
DIN EN ISO 4628-7:2016-07 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 7: ASSESSMENT OF DEGREE OF CHALKING BY VELVET METHOD (ISO 4628-7:2016) |
ISO 14644-6:2007 | Cleanrooms and associated controlled environments Part 6: Vocabulary |
ISO 14644-8:2013 | Cleanrooms and associated controlled environments Part 8: Classification of air cleanliness by chemical concentration (ACC) |
ASTM F 1215 : 1989 | Test Method for Determining the Initial Efficiency of a Flatsheet Filter Medium in an Airflow Using Latex Spheres (Withdrawn 1998) |
DIN EN ISO 22612:2005-05 | Clothing for protection against infectious agents - Test method for resistance to dry microbial penetration (ISO 22612:2005); German version EN ISO 22612:2005 |
DIN EN ISO 4628-6:2011-12 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2011) |
EN ISO 13934-1:2013 | Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013) |
DIN IEC 60093 : 1993 | METHODS OF TEST FOR INSULATING MATERIALS FOR ELECTRICAL PURPOSES; VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS |
EN ISO 4628-1:2016 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 1: GENERAL INTRODUCTION AND DESIGNATION SYSTEM (ISO 4628-1:2016) |
EN 285:2015 | Sterilization - Steam sterilizers - Large sterilizers |
EN 149:2001+A1:2009 | Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking |
DIN EN ISO 14644-10:2013-06 | Cleanrooms and associated controlled environments - Part 10: Classification of surface cleanliness by chemical concentration (ISO 14644-10:2013) |
ISO 9237:1995 | Textiles — Determination of the permeability of fabrics to air |
ISO 9073-3:1989 | Textiles — Test methods for nonwovens — Part 3: Determination of tensile strength and elongation |
VDI 2083 Blatt 1:2013-01 | Cleanroom technology - Particulate air cleanliness classes |
EN ISO 20344:2011 | Personal protective equipment - Test methods for footwear (ISO 20344:2011) |
DIN EN 14683:2014-07 | MEDICAL FACE MASKS - REQUIREMENTS AND TEST METHODS |
ISO 11737-1:2006 | Sterilization of medical devices Microbiological methods Part 1: Determination of a population of microorganisms on products |
DIN EN 285:2016-05 | Sterilization - Steam sterilizers - Large sterilizers |
DIN EN ISO 9073-6:2003-05 | Textiles - Test methods for nonwovens - Part 6: Absorption (ISO 9073-6:2000); German version EN ISO 9073-6:2003 |
VDI 4700-1 : 2015 COR 1 2015 | Terminology of civil engineering and building services - Corrigendum concerning guideline VDI 4700 Part 1:2015-10 |
EN 26591-1 : 1992 | PACKAGING - SACKS - DESCRIPTION AND METHOD OF MEASUREMENT - PART 1: EMPTY PAPER SACKS |
EN ISO 9237 : 1995 | TEXTILES - DETERMINATION OF PERMEABILITY OF FABRICS TO AIR |
DIN EN ISO 8871-3:2004-09 | ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 3: DETERMINATION OF RELEASED-PARTICLE COUNT |
EN 16523-1:2015 | Determination of material resistance to permeation by chemicals - Part 1: Permeation by liquid chemical under conditions of continuous contact |
DIN EN 16523-1:2015-04 | DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 1: PERMEATION BY LIQUID CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT |
ISO 8871-3:2003 | Elastomeric parts for parenterals and for devices for pharmaceutical use Part 3: Determination of released-particle count |
DIN EN ISO 4628-2:2016-07 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 2: ASSESSMENT OF DEGREE OF BLISTERING (ISO 4628-2:2016) |
EN ISO 178:2010/A1:2013 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013) |
DIN EN ISO 22610:2015-12 (Draft) | SURGICAL DRAPES, GOWNS AND CLEAN AIR SUITS, USED AS MEDICAL DEVICES, FOR PATIENTS, CLINICAL STAFF AND EQUIPMENT - TEST METHOD TO DETERMINE THE RESISTANCE TO WET BACTERIAL PENETRATION |
IEST RP CC003.4 : 2011 | GARMENT SYSTEM CONSIDERATIONS IN CLEANROOMS AND OTHER CONTROLLED ENVIRONMENTS |
DIN EN ISO 2812-1:2007-05 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 1: IMMERSION IN LIQUIDS OTHER THAN WATER (ISO 2812-1:2017) |
VDI 3926 Blatt 1:2004-10 | Testing of cleanable filter media - Standard test for the evaluation of cleanable filter media |
DIN EN ISO 20345:2012-04 | Personal protective equipment - Safety footwear (ISO 20345:2011); German version EN ISO 20345:2011 |
DIN EN ISO 11137-1:2015-11 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11137-1:2006, INCLUDING AMD 1:2013) |
DIN EN 455-3:2015-07 | Medical gloves for single use - Part 3: Requirements and testing for biological evaluation |
DIN EN ISO 11137-3:2015-08 (Draft) | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL (ISO 11137-3:2017) |
EN ISO 12947-2:2016 | Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown (ISO 12947-2:2016) |
EN 136:1998/AC:2003 | RESPIRATORY PROTECTIVE DEVICES - FULL-FACE MASKS - REQUIREMENTS, TESTING, MARKING |
DIN EN ISO 4628-4:2016-07 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 4: ASSESSMENT OF DEGREE OF CRACKING (ISO 4628-4:2016) |
EN ISO 8871-3:2004 | ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICALS USE - PART 3: DETERMINATION OF RELEASED-PARTICLE COUNT |
VDI 2083 Blatt 4.1:2006-10 | Cleanroom technology - Planning, construction and start-up of cleanrooms |
DIN EN ISO 20347:2012-05 | Personal protective equipment - Occupational footwear (ISO 20347:2012) |
EN ISO 4628-4:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016) |
VDI 2083 Blatt 8.1:2014-10 | Cleanroom technology - Air cleanliness chemical concentration (ACC) |
DIN EN ISO 14644-6:2007-10 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 6: VOCABULARY |
ISO 4628-4:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 4: Assessment of degree of cracking |
ISO 4628-3:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 3: Assessment of degree of rusting |
ISO 216:2007 | Writing paper and certain classes of printed matter Trimmed sizes A and B series, and indication of machine direction |
ISO 20347:2012 | Personal protective equipment Occupational footwear |
EN ISO 4628-3:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016) |
VDI 1000:2017-02 | VDI Standardisation Work - Principles and procedures |
DIN EN 13795:2013-10 | SURGICAL DRAPES, GOWNS AND CLEAN AIR SUITS, USED AS MEDICAL DEVICES FOR PATIENTS, CLINICAL STAFF AND EQUIPMENT - GENERAL REQUIREMENTS FOR MANUFACTURERS, PROCESSORS AND PRODUCTS, TEST METHODS, PERFORMANCE REQUIREMENTS AND PERFORMANCE LEVELS |
DIN EN ISO 20344:2013-02 | Personal protective equipment - Test methods for footwear (ISO 20344:2011) |
IEC 60093:1980 | Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials |
EN ISO 11137-2:2015 | Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO 11137-2:2013) |
ISO 4628-5:2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
ISO 4628-1:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 1: General introduction and designation system |
ISO 11137-3:2017 | Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects of development, validation and routine control |
ISO 22612:2005 | Clothing for protection against infectious agents Test method for resistance to dry microbial penetration |
DIN EN ISO 12947-1:2007-04 | Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 1: Martindale abrasion testing apparatus (ISO 12947-1:1998 + Cor. 1:2002) (includes Corrigendum AC:2006) |
DIN EN ISO 15378:2016-03 | PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2015, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP) (ISO 15378:2017) |
EN ISO 20345:2011 | Personal protective equipment - Safety footwear (ISO 20345:2011) |
EN ISO 7730:2005 | Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005) |
EN ISO 4628-6:2011 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2011) |
ISO 16604:2004 | Clothing for protection against contact with blood and body fluids Determination of resistance of protective clothing materials to penetration by blood-borne pathogens Test method using Phi-X 174 bacteriophage |
ISO 15378:2017 | Primary packaging materials for medicinal products — Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) |
EN 14683:2014 | Medical face masks - Requirements and test methods |
ISO 11137-2:2013 | Sterilization of health care products — Radiation — Part 2: Establishing the sterilization dose |
ISO 22610:2006 | Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment Test method to determine the resistance to wet bacterial penetration |
EN ISO 14644-8:2013 | Cleanrooms and associated controlled environments - Part 8: Classification of air cleanliness by chemical concentration (ACC) (ISO 14644-8:2013) |
DIN EN ISO 14644-9:2012-12 | Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration (ISO 14644-9:2012) |
EN 13795:2011+A1:2013 | Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment - General requirements for manufacturers, processors and products, test methods, performance requirements and performance levels |
ISO 12947-4:1998 | Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 4: Assessment of appearance change |
ASTM F 2101 : 2014 : REDLINE | TEST METHOD FOR EVALUATING THE BACTERIAL FILTRATION EFFICIENCY (BFE) OF MEDICAL FACE MASK MATERIALS, USING A BIOLOGICAL AEROSOL OF STAPHYLOCOCCUS AUREUS |
VDI 2083 Blatt 5.1:2007-09 | Cleanroom technology - Cleanroom operation |
EN ISO 12947-1:1998/AC:2006 | TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 1: MARTINDALE ABRASION TESTING APPARATUS |
ISO 11092:2014 | Textiles — Physiological effects — Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) |
ISO 14644-1:2015 | Cleanrooms and associated controlled environments Part 1: Classification of air cleanliness by particle concentration |
EN ISO 20347:2012 | Personal protective equipment - Occupational footwear (ISO 20347:2012) |
ISO 9001:2015 | Quality management systems — Requirements |
ISO 2812-1:2017 | Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water |
EN ISO 11137-1:2015 | Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006, including Amd 1:2013) |
IEST RP CC004.3 : 2004 | EVALUATING WIPING MATERIALS USED IN CLEANROOMS AND OTHER CONTROLLED ENVIRONMENTS |
EN 455-2:2015 | Medical gloves for single use - Part 2: Requirements and testing for physical properties |
ISO 7730:2005 | Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria |
ISO 9073-10:2003 | Textiles Test methods for nonwovens Part 10: Lint and other particles generation in the dry state |
EN 31092:1993/A1:2012 | TEXTILES - DETERMINATION OF PHYSIOLOGICAL PROPERTIES - MEASUREMENT OF THERMAL AND WATER-VAPOUR RESISTANCE UNDER STEADY-STATE CONDITIONS (SWEATING GUARDED - HOTPLATE TEST) (ISO 11092:1993/AMD 1:2012) |
ASTM F 51/F51M : 2000 | TEST METHOD FOR SIZING AND COUNTING PARTICULATE CONTAMINANT IN AND ON CLEAN ROOM GARMENTS |
EN ISO 11092:2014 | Textiles - Physiological effects - Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) (ISO 11092:2014) |
DIN EN 455-2:2015-07 | MEDICAL GLOVES FOR SINGLE USE - PART 2: REQUIREMENTS AND TESTING FOR PHYSICAL PROPERTIES |
DIN EN ISO 13934-1:2013-08 | TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 1: DETERMINATION OF MAXIMUM FORCE AND ELONGATION AT MAXIMUM FORCE USING THE STRIP METHOD (ISO 13934-1:2013) |
ISO 20346:2014 | Personal protective equipment Protective footwear |
EN ISO 20346:2014 | Personal protective equipment - Protective footwear (ISO 20346:2014) |
EN ISO 9073-6:2003 | Textiles - Test methods for nonwovens - Part 6: Absorption (ISO 9073-6:2000) |
ISO 4628-6:2011 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method |
DIN EN ISO 9001:2015-11 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS (ISO 9001:2015) |
EN ISO 9073-10:2004 | Textiles - Test methods for nonwovens - Part 10: Lint and other particles generation in the dry state (ISO 9073-10:2003) |
DIN EN ISO 12947-4:2007-04 | Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 4: Assessment of appearance change (ISO 12947-4:1998 + Cor. 1:2002) (includes Corrigendum AC:2006) |
ISO 20345:2011 | Personal protective equipment Safety footwear |
EN ISO 4628-7:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method (ISO 4628-7:2016) |
EN ISO 14644-10:2013 | Cleanrooms and associated controlled environments - Part 10: Classification of surface cleanliness by chemical concentration (ISO 14644-10:2013) |
VDI 2083 Blatt 17:2013-06 | Cleanroom technology - Compatibility of materials with the required cleanliness |
DIN EN 31092:2013-01 | TEXTILES - PHYSIOLOGICAL EFFECTS - MEASUREMENT OF THERMAL AND WATER-VAPOUR RESISTANCE UNDER STEADY-STATE CONDITIONS (SWEATING GUARDED-HOTPLATE TEST) (ISO 11092:1993 + AMD.1:2012) |
DIN EN ISO 4628-3:2016-07 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016); German version EN ISO 4628-3:2016 |
EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
EN ISO 4628-5:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016) |
DIN EN ISO 11737-1:2009-09 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 1: DETERMINATION OF A POPULATION OF MICROORGANISMS ON PRODUCTS |
ISO 12947-2:2016 | Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown |
EN ISO 12947-4:1998/AC:2006 | TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 4: ASSESSMENT OF APPEARANCE CHANGE |
VDI 2083 Blatt 9.1:2006-12 | Clean room technology - Compatibility with required cleanliness and surface cleanliness |
DIN EN ISO 20346:2014-09 | Personal protective equipment - Protective footwear (ISO 20346:2014); German version EN ISO 20346:2014 |
IEST RP CC003.3 : 2003 ERRATA 2008 | GARMENTS SYSTEMS CONSIDERATIONS FOR CLEANROOMS AND OTHER CONTROLLED ENVIRONMENTS |
EN ISO 216:2007 | Writing paper and certain classes of printed matter - Trimmed sizes - A and B series, and indication of machine direction (ISO 216:2007) |
EN ISO 14644-6:2007 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 6: VOCABULARY |
DIN EN ISO 4628-5:2016-07 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016) |
ISO 178:2010 | Plastics Determination of flexural properties |
VDE 0303-30 : 1993 | METHODS OF TEST FOR INSULATING MATERIALS FOR ELECTRICAL PURPOSES; VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS |
EN ISO 14644-1:2015 | Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness by particle concentration (ISO 14644-1:2015) |
TRGS 727 : 2016 COR 2016 | VERMEIDUNG VON ZUENDGEFAHREN INFOLGE ELEKTROSTATISCHER AUFLADUNGEN |
ISO 9073-6:2000 | Textiles — Test methods for nonwovens — Part 6: Absorption |
EN ISO 14644-9:2012 | Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration (ISO 14644-9:2012) |
DIN EN 149:2009-08 | RESPIRATORY PROTECTIVE DEVICES - FILTERING HALF MASKS TO PROTECT AGAINST PARTICLES - REQUIREMENTS, TESTING, MARKING |
EN ISO 11137-3:2017 | Sterilization of health care products - Radiation - Part 3: Guidance on dosimetric aspects of development, validation and routine control (ISO 11137-3:2017) |
IEST RP CC005.4 : 2013 | GLOVES AND FINGER COTS USED IN CLEANROOMS AND OTHER CONTROLLED ENVIRONMENTS |
VDA PART 19-1 : 2015 | INSPECTION OF TECHNICAL CLEANLINESS - PARTICULATE CONTAMINATION OF FUNCTIONALLY RELEVANT AUTOMOTIVE COMPONENTS |
EN ISO 15378:2017 | Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) (ISO 15378:2017) |
ISO 20344:2011 | Personal protective equipment Test methods for footwear |
ISO 4628-2:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering |
ISO 4628-7:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 7: Assessment of degree of chalking by velvet method |
CLC/TR 50404:2003 | Electrostatics - Code of practice for the avoidance of hazards due to static electricity |
EN ISO 22612:2005 | Clothing for protection against infectious agents - Test method for resistance to dry microbial penetration (ISO 22612:2005) |
ISO 14644-9:2012 | Cleanrooms and associated controlled environments Part 9: Classification of surface cleanliness by particle concentration |
ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
DIN EN ISO 12947-2:2015-09 (Draft) | TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 2: DETERMINATION OF SPECIMEN BREAKDOWN (ISO 12947-2:2016) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.