ISO 15083:2003
|
Small craft - Bilge-pumping systems
|
ISO 12215-5:2008
|
Small craft Hull construction and scantlings Part 5: Design pressures for monohulls, design stresses, scantlings determination
|
ISO 2896:2001
|
Rigid cellular plastics Determination of water absorption
|
ISO 11192:2005
|
Small craft Graphical symbols
|
ISO 7010:2011
|
Graphical symbols Safety colours and safety signs Registered safety signs
|
ISO 14946:2001
|
Small craft Maximum load capacity
|
ISO 4675:2017
|
Rubber- or plastics-coated fabrics — Low-temperature bend test
|
ISO 11591:2011
|
Small craft, engine-driven Field of vision from helm position
|
ISO 12217-3:2015
|
Small craft — Stability and buoyancy assessment and categorization — Part 3: Boats of hull length less than 6 m
|
ISO 10088:2013
|
Small craft — Permanently installed fuel systems
|
ISO 11547:1994
|
Small craft — Start-in-gear protection
|
ISO 6185-4:2011
|
Inflatable boats Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater
|
ISO 2411:2017
|
Rubber- or plastics-coated fabrics — Determination of coating adhesion
|
ISO 11105:1997
|
Small craft Ventilation of petrol engine and/or petrol tank compartments
|
ISO 11592:2001
|
Small craft less than 8 m length of hull Determination of maximum propulsion power rating
|
ISO 8666:2016
|
Small craft Principal data
|
ISO 8847:2004
|
Small craft Steering gear Cable and pulley systems
|
ISO 15084:2003
|
Small craft Anchoring, mooring and towing Strong points
|
ISO 9775:1990
|
Small craft Remote steering systems for single outboard motors of 15 kW to 40 kW power
|
ISO 10133:2012
|
Small craft Electrical systems Extra-low-voltage d.c. installations
|
ISO 8469:2013
|
Small craft Non-fire-resistant fuel hoses
|
ISO 12217-1:2015
|
Small craft — Stability and buoyancy assessment and categorization — Part 1: Non-sailing boats of hull length greater than or equal to 6 m
|
ISO 12215-3:2002
|
Small craft — Hull construction and scantlings — Part 3: Materials: Steel, aluminium alloys, wood, other materials
|
ISO 8849:2003
|
Small craft Electrically operated direct-current bilge pumps
|
ISO 8848:1990
|
Small craft Remote steering systems
|
ISO 10592:1994
|
Small craft Hydraulic steering systems
|
ISO 15652:2003
|
Small craft Remote steering systems for inboard mini jet boats
|
ISO 11812:2001
|
Small craft Watertight cockpits and quick-draining cockpits
|
ISO 12215-1:2000
|
Small craft — Hull construction and scantlings — Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate
|
ISO 10240:2004
|
Small craft Owner's manual
|
ISO 21487:2012
|
Small craft — Permanently installed petrol and diesel fuel tanks
|
ISO 3864-1:2011
|
Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
|
ISO 13297:2014
|
Small craft Electrical systems Alternating current installations
|
ISO 15085:2003
|
Small craft Man-overboard prevention and recovery
|
EN 314-2:1993
|
Plywood - Bonding quality - Part 2: Requirements
|
ISO 16147:2002
|
Small craft Inboard diesel engines Engine-mounted fuel and electrical components
|
ISO 15584:2001
|
Small craft Inboard petrol engines Engine-mounted fuel and electrical components
|
ISO 8665:2006
|
Small craft Marine propulsion reciprocating internal combustion engines Power measurements and declarations
|
ISO 3011:1997
|
Rubber- or plastics-coated fabrics Determination of resistance to ozone cracking under static conditions
|
ISO 4674-1:2016
|
Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods
|
ISO 10087:2006
|
Small craft Craft identification Coding system
|
ISO 12215-6:2008
|
Small craft — Hull construction and scantlings — Part 6: Structural arrangements and details
|
ISO 1817:2015
|
Rubber, vulcanized or thermoplastic Determination of the effect of liquids
|
ISO 14945:2004
|
Small craft Builder's plate
|