ISO 7010:2011
|
Graphical symbols Safety colours and safety signs Registered safety signs
|
IEC 60068-2-5:2010
|
Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing
|
EN 12284 : 2003
|
REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING
|
IEC 60068-1:2013
|
Environmental testing - Part 1: General and guidance
|
IEC 60335-2-24:2010+AMD1:2012+AMD2:2017 CSV
|
Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
|
ISO 4126-1:2013
|
Safety devices for protection against excessive pressure — Part 1: Safety valves
|
IEC 60335-2-98:2002+AMD1:2004+AMD2:2008 CSV
|
Household and similar electrical appliances - Safety - Part 2-98: Particular requirements for humidifiers
|
IEC TR 60079-20:1996
|
Electrical apparatus for explosive gas atmospheres - Part 20: Data for flammable gases and vapours, relating to the use of electrical apparatus
|
EN 378-4:2016
|
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovery
|
DIN 12876-2:2001-12
|
ELECTRICAL LABORATORY DEVICES - LABORATORY CIRCULATORS AND BATHES - PART 2: DETERMINATION OF PARAMETERS FOR HEATING AND REFRIGERATED CIRCULATORS
|
EN 378-1:2016
|
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria
|
EN 378-3:2016
|
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection
|
MIL-STD-810 Revision G:2008
|
ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
|
EN 60079-15:2010
|
Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
|
ISO 5149:1993
|
Mechanical refrigerating systems used for cooling and heating Safety requirements
|
IEC 60068-2-13:1983
|
Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure
|
IEC TR 62471-2:2009
|
Photobiological safety of lamps and lamp systems - Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety
|
IEC 60068-2-11:1981
|
Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist
|
IEC 60068-2-39:2015
|
Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
|
IEC 60068-2-66:1994
|
Environmental testing - Part 2: Test methods - Test Cx: Damp heat, steady state (unsaturated pressurized vapour)
|
EN 14276-1:2006+A1:2011
|
Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
|
EN 60335-2-24:2010
|
Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
|
IEC 60335-2-74:2002+AMD1:2006+AMD2:2009 CSV
|
Household and similar electrical appliances - Safety - Part 2-74: Particular requirements for portable immersion heaters
|
IEC 60068-2-53:2010
|
Environmental testing - Part 2-53: Tests and guidance - Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests
|
EN 12178:2016
|
Refrigerating systems and heat pumps - Liquid level indicating devices - Requirements, testing and marking
|
DIN 12876-1:2001-12
|
ELECTRICAL LABORATORY DEVICES - LABORATORY CIRCULATORS AND BATHES - PART 1: TERMS AND CLASSIFICATION
|
IEC 60068-2-67:1995
|
Environmental testing - Part 2-67: Tests - Test Cy: Damp heat, steady state, accelerated test primarily intended for components
|
IEC 60068-2-38:2009
|
Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
|
EN 12263:1998
|
Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure - Requirements and tests
|
IEC 60335-2-34:2012+AMD1:2015+AMD2:2016 CSV
|
Household and similar electrical appliances - Safety - Part 2-34:Particular requirements for motor-compressors
|
EN 14276-2:2007+A1:2011
|
Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements
|
EN 1736:2008
|
Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators, expansion joints and non-metallic tubes - Requirements, design and installation
|
IEC 60068-3-5:2001
|
Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers
|
IEC 60068-2-10:2005
|
Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth
|
IEC 60068-2-2:2007
|
Environmental testing - Part 2-2: Tests - Test B: Dry heat
|
DIN 12876-3:2001-12
|
ELECTRICAL LABORATORY DEVICES - LABORATORY CIRCULATORS AND BATHS - PART 3: DETERMINATION OF RATINGS OF LABORATORY BATHS
|
IEC 62471:2006
|
Photobiological safety of lamps and lamp systems
|
EN 60079-20-1:2010
|
Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data
|
ISO 9227:2017
|
Corrosion tests in artificial atmospheres — Salt spray tests
|
IEC 61010-2-010:2014
|
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
|
IEC 60068-2-1:2007
|
Environmental testing - Part 2-1: Tests - Test A: Cold
|
IEC 60335-2-73:2002+AMD1:2006+AMD2:2009 CSV
|
Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters
|
ISO 7000:2014
|
Graphical symbols for use on equipment Registered symbols
|
EN 837-1:1996/AC:1998
|
PRESSURE GAUGES - BOURDON TUBE PRESSURE GAUGES - DIMENSIONS, METROLOGY, REQUIREMENTS AND TESTING
|
IEC 61770:2008+AMD1:2015 CSV
|
Electric appliances connected to the water mains - Avoidance ofbacksiphonage and failure of hose-sets
|
EN 837-2:1997
|
Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges
|
ISO 817:2014
|
Refrigerants Designation and safety classification
|
IEC 60068-2-14:2009
|
Environmental testing - Part 2-14: Tests - Test N: Change of temperature
|
EN 837-3:1996
|
Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing
|
EN 62471:2008
|
Photobiological safety of lamps and lamp systems
|
EN ISO 7010 : 2012 AMD 7 2017
|
GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - REGISTERED SAFETY SIGNS (ISO 7010:2011/AMD 7:2016)
|
EN 378-2:2016
|
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
|
IEC 60079-15:2010
|
Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
|
IEC 60335-2-89:2010+AMD1:2012+AMD2:2015 CSV
|
Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor
|
1997/23/EC : 1997
|
DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT
|
IEC 60335-2-41:2012
|
Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps
|
IEC 60068-2-30:2005
|
Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
|