ASME B18.2.1 : 2012
|
SQUARE, HEX, HEAVY HEX, AND ASKEW HEAD BOLTS AND HEX, HEAVY HEX, HEX FLANGE, LOBED HEAD, AND LAG SCREWS (INCH SERIES)
|
W59-13
|
Welded steel construction (metal arc welding)
|
ANSI C29.3 : 2015
|
WET PROCESS PORCELAIN INSULATORS - SPOOL TYPE
|
ISO 8678:1988
|
Cup head square neck bolts with small head and short neck Product grade B
|
ASTM A 47M : 1990
|
Standard Specification for Ferritic Malleable Iron Castings [Metric]
|
ASME B18.16.1M : 79(R2001)
|
MECHANICAL AND PERFORMANCE REQUIREMENTS FOR PREVAILING TORQUE-TYPE STEEL METRIC HEX NUTS AND HEX FLANGE NUTS
|
CSA O15 : 2015
|
WOOD UTILITY POLES AND REINFORCING STUBS
|
CSA B97.2 : 0
|
INTERPRETATIONS OF LIMITS AND TOLERANCES
|
SAE J 429 : 2014
|
MECHANICAL AND MATERIAL REQUIREMENTS FOR EXTERNALLY THREADED FASTENERS
|
CSA C411.1 : 2016
|
AC SUSPENSION INSULATORS
|
ASME B18.5.2.2M : 1982
|
METRIC ROUND HEAD SQUARE NECK BOLTS
|
CSA Z90 : 1975
|
INTRODUCTION TO SAMPLING PROCEDURES FOR MATERIALS AND MANUFACTURED PRODUCTS
|
ASTM E 155 : 2015 : REDLINE
|
Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings
|
IEEE C135.1-1999
|
IEEE Standard for Zinc-Coated Steel Bolts and Nuts for Overhead Line Construction
|
ASTM E 505 : 2015 : REDLINE
|
Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings
|
ASTM D 1525 : 2017
|
Standard Test Method for Vicat Softening Temperature of Plastics
|
ANSI/NEMA C29.4-2015
|
American National Standard Wet Process Porcelain Insulators—Strain Type
|
ASTM A 757/A757M : 2015 : REDLINE
|
Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service
|
Z259.15-17
|
Anchorage connectors
|
ASTM A 563 : 2015 : REDLINE
|
Standard Specification for Carbon and Alloy Steel Nuts
|
IEC 60437:1997
|
Radio interference test on high-voltage insulators
|
ANSI/NEMA C29.2B:2013
|
American National Standard for Insulators-Wet Process Porcelain and Toughened Glass—Transmission Suspension Type
|
CSA G40.20 G40.21 : 2013
|
GENERAL REQUIREMENTS FOR ROLLED OR WELDED STRUCTURAL QUALITY STEEL/STRUCTURAL QUALITY STEEL
|
NEMA C29.2A : 2013
|
WET PROCESS PORCELAIN AND TOUGHENED GLASS - DISTRIBUTION SUSPENSION TYPE
|
ASTM A 493 : 2016 : REDLINE
|
Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
|
ASTM G 155 : 2013 : REDLINE
|
Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
|
CSA ISO 9001 : 2016
|
QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS
|
ASTM A 449 : 2014 : REDLINE
|
Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
|
CSA G164 : 1992
|
HOT DIP GALVANIZING OF IRREGULARLY SHAPED ARTICLES
|
CSA B78.2 : 0
|
DIMENSIONING AND TOLERANCING OF TECHNICAL DRAWINGS
|
IEEE C135.3-2001
|
IEEE Standard for Zinc-Coated Ferrous Lag Screws for Overhead Line Construction
|
CSA G12 : 2014
|
ZINC-COATED STEEL WIRE STRAND
|
CGSB 48.9712 : 2014
|
NON-DESTRUCTIVE TESTING - QUALIFICATION AND CERTIFICATION OF PERSONNEL
|
ISO 8677:1986
|
Cup head square neck bolts with large head Product grade C
|
ASTM C 83 : 38
|
METHOD OF CURING PORTLAND-CEMENT CONCRETE SLABS BY SURFACE APPLICATION OF CALCIUM CHLORIDE
|
ASTM A 275/A275M : 2015-05
|
PRACTICE FOR MAGNETIC PARTICLE EXAMINATION OF STEEL FORGINGS
|
ASQ A2:1987
|
Terms, Symbols, And Definitions For Acceptance Sampling
|
ASTM E 8/E8M : 2016-09
|
TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS
|
ASQ Z1.9:2003 (R2013)
|
Sampling Procedures And Tables For Inspection By Variables For Percent Nonconforming
|
ASTM D 746 : 2014 : REDLINE
|
Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
|
ISO 898-1:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
|