Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 12195-1:2010/AC:2014

Current
Current

The latest, up-to-date edition.

LOAD RESTRAINING ON ROAD VEHICLES - SAFETY - PART 1: CALCULATION OF SECURING FORCES
Amendment of

EN 12195-1:2010

Published date

05-03-2014

Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols, units and abbreviations
4 Acceleration coefficients
5 Methods of calculation
6 Parameters
7 Cargo securing testing
8 Instructions for use
Annex A (informative) - Examples for the calculation of
        lashing forces
Annex B (normative) - Friction
Annex C (informative) - Load securing protocol
Annex D (normative) - Practical tests for determination
        of the efficiency of cargo securing arrangements
Annex E (informative) - Documentation of practical tests
Bibliography

Applies to the design of securing methods (blocking, lashing, and combinations) for securing of loads for surface transport by road vehicles or parts of them (lorries, trailers, containers and swap bodies), including their transport on vessels or by rail and/or combinations thereof.

Committee
TC 168
DevelopmentNote
Supersedes PREN 12195-1. (10/2005)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

DIN ISO 27956:2011-11 Road vehicles - Securing of cargo in delivery vans - Requirements and test methods (ISO 27956:2009)
08/30174125 DC : DRAFT SEP 2008 BS EN 12312-2 AMD1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 2: CATERING VEHICLES
13/30273033 DC : 0 BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
BS ISO 27956:2009 Road vehicles. Securing of cargo in delivery vans. Requirements and test methods
12/30274592 DC : 0 BS ISO 15818 - EARTH-MOVING MACHINERY - LIFTING AND TYING-DOWN ATTACHMENT POINTS - PERFORMANCE REQUIREMENTS
I.S. EN 1012-3:2013 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
ISO 15818:2017 Earth-moving machinery Lifting and tying-down attachment points Performance requirements
17/30354108 DC : 0 BS EN 17106-1 - ROAD OPERATION MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
EN 13035-2:2008 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 2: Storage, handling and transportation equipment outside the factory
EN 12195-4:2003 Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes
EN 12642:2016 Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements
EN 12312-2:2014 Aircraft ground support equipment - Specific requirements - Part 2: Catering vehicles
12/30264441 DC : 0 BS ISO 16049-2 - AIR CARGO EQUIPMENT - RESTRAINT STRAPS - PART 2: UTILIZATION GUIDELINES AND LASHING CONDITIONS
BS ISO 15818:2017 Earth-moving machinery. Lifting and tying-down attachment points. Performance requirements
BS ISO 16049-2:2013 Air cargo equipment. Restraint straps Utilization guidelines and lashing calculations
STANAG 2413 : 2009 DEMOUNTABLE LOAD CARRYING PLATFORMS (DLCP/FLATRACKS)
ISO 16049-2:2013 Air cargo equipment Restraint straps Part 2: Utilization guidelines and lashing calculations
DIN EN 12195-4:2004-04 Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes
DIN EN 536:2016-01 ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS
I.S. EN 12312-2:2014 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 2: CATERING VEHICLES
I.S. EN 536:2015 ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS
I.S. EN 12642:2016 SECURING OF CARGO ON ROAD VEHICLES - BODY STRUCTURE OF COMMERCIAL VEHICLES - MINIMUM REQUIREMENTS
VDI 2700 Blatt 16:2009-07 Securing of loads on road vehicles - Securing of loads on transporter up to a total mass of 7,5 t
VDI 2700 Blatt 17:2009-04 Securing of loads on road vehicles - Securing of skips on skip loader vehicles and their trailers
VDI 3968 Blatt 1:2013-04 Securing of load units - Specification of requirements
VDI 2700 Blatt 5:2011-12 Securing of loads on road vehicles - Quality management systems
VDI 2700:2004-11 Securing of loads on road vehicles
VDI 2700 Blatt 7:2014-07 Securing of loads on road vehicles - Safety of loads in combined transport
VDI 2700 Blatt 11:2006-10 Securing of loads on road vehicles - Securing of reinforcing steel
VDI 2700 Blatt 3.1:2006-10 Securing of loads on road vehicles - Instruction manual for lashings
VDI 2700 Blatt 8.2:2010-12 Securing of loads on road vehicles - Securing of trucks on vehicle transporters
VDI 2700 Blatt 12:2009-01 Securing of loads on road vehicles - Securing of beverage products
VDI 2700 Blatt 6:2006-10 Securing of loads on road vehicles - Part-load consignment
VDI 2700 Blatt 3.2:2006-09 Securing of loads on road vehicles - Vehicles equipments and securing aids for load
17/30359202 DC : 0 BS EN 13445-3 AMD 8 - UNFIRED PRESSURE VESSELS - PART 3: DESIGN
BS EN 13035-2:2008 Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements Storage, handling and transportation equipment outside the factory
BS EN 1012-3:2013 Compressors and vacuum pumps. Safety requirements Process compressors
17/30364338 DC : 0 BS EN 1009-1 - MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 1: COMMON REQUIREMENTS FOR PARTLY COMPLETED MACHINERY AND PROCESSING PLANTS
DIN EN 12642:2015-08 (Draft) SECURING OF CARGO ON ROAD VEHICLES - BODY STRUCTURE OF COMMERCIAL VEHICLES - MINIMUM REQUIREMENTS
UNI EN 1012-3 : 2014 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
UNI EN 12312-2 : 2014 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 2: CATERING VEHICLES
11/30240510 DC : 0 BS EN 12312-2 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 2: CATERING VEHICLES
DIN EN 13035-2:2008-10 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 2: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT OUTSIDE THE FACTORY
15/30324373 DC : 0 BS EN 12642 - SECURING OF CARGO ON ROAD VEHICLES - BODY STRUCTURE OF COMMERCIAL VEHICLES - MINIMUM REQUIREMENTS
08/30180978 DC : DRAFT APR 2008 BS ISO 27956 - ROAD VEHICLES - SECURING OF CARGO IN DELIVERY VANS - REQUIREMENTS AND TEST METHODS
ISO 27956:2009 Road vehicles — Securing of cargo in delivery vans — Requirements and test methods
BS EN 12312-2:2014 Aircraft ground support equipment. Specific requirements Catering vehicles
BS EN 12642:2016 Securing of cargo on road vehicles. Body structure of commercial vehicles. Minimum requirements
BS EN 536:2015 Road construction machines. Mixing plants for road construction materials. Safety requirements
UNE-EN 12642:2017 Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements
BS EN 12195-4:2003 Load restraint assemblies on road vehicles. Safety Lashing steel wire ropes
EN 536:2015 Road construction machines - Mixing plants for road construction materials - Safety requirements
PREN 12642 : DRAFT 2015 SECURING OF CARGO ON ROAD VEHICLES - BODY STRUCTURE OF COMMERCIAL VEHICLES - MINIMUM REQUIREMENTS
05/30112848 DC : 0 EN 13035-2 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 2: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT OUTSIDE THE FACTORY
DIN EN 13035-2 E : 2008 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 2: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT OUTSIDE THE FACTORY
I.S. EN 13035-2:2008 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 2: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT OUTSIDE THE FACTORY
UNE-EN 12312-2:2015 Aircraft ground support equipment - Specific requirements - Part 2: Catering vehicles
EN 1012-3:2013 Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors
DIN EN 12642:2017-03 SECURING OF CARGO ON ROAD VEHICLES - BODY STRUCTURE OF COMMERCIAL VEHICLES - MINIMUM REQUIREMENTS

EN 12642:2016 Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements
EN ISO 2233 : 2001 PACKAGING - COMPLETE, FILLED TRANSPORT PACKAGES AND UNIT LOADS - CONDITIONING FOR TESTING
EN 12195-3:2001 Load restraint assemblies on road vehicles - Safety - Part 3: Lashing chains
EN 12195-2:2000 Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres
ISO 2233:2000 Packaging Complete, filled transport packages and unit loads Conditioning for testing
EN 12195-4:2003 Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes
ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
EN ISO 12100-2:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
ISO 7500-1:2015 Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system
EN 283:1991 Swap bodies - Testing

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more