Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

MIL-STD-794 Revision E:1982

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

PART AND EQUIPMENT, PROCEDURES FOR PACKAGING AND PACKING OF
Available format(s)

PDF

Superseded date

23-07-2013

Measures for packaging parts and equipment based on their composition, surface finish, weight, size, configuration and required level of protection. Coverage includes referenced documents, definitions, packaging design drawings, reusable containers, unpacking instructions, packing, marking, hazardous material shipment, security assistance material, and packaging design validation. Also gives tables and appendices.

DocumentType
Standard
Pages
124
PublisherName
US Military Specs/Standards/Handbooks
Status
Superseded
SupersededBy
Supersedes

MIL-W-17316 Revision A:1980 WIND MEASURING SET AN/PMQ-30 (COMPONENTS OF)
MIL A 85670 : 0 ANTENNA, BROADBAND AS-3191/A, AS-3792/A, AND AS -3793/A
MIL C 38240 : C COMPUTER, ALTITUDE, ALTITUDE ENCODING CPU 66, GENERAL SPECIFICATION FOR AND MTU 39/A MOUNTING TRAY
MIL-V-25023 Revision B:1967 VALVE, FUEL DRAIN, SELF-LOCKING
DOD-S-87956 Base Document:1979 SHELTER, S-80A AND S-82A
MIL-I-18856 Revision B:1969 INDICATOR, ANGLE OF ATTACK, 28V DC MS28062 AND MS28067
MIL-T-38034 Revision E:1970 TIMER, FIRE CONTROL, BOMBING, DUAL
MIL-A-38307 Revision A:1981 ACCELEROMETER, AIRCRAFT, MX-6663/AJB-7
MIL-R-38370 Revision B:1972 RECORDING SET, FLIGHT DATA A/A24U-10
MIL-P-81655 Base Document:1970 PITOT STATIC TUBE, L-SHAPED, COMPENSATED, ELECTRICALLY HEATED, GENERAL SPECIFICATION FOR
MIL-C-87979 Base Document:1987 CLOCK, AIRCRAFT, ELECTRONIC
GGG-M-125-7 Revision B:1985 RESPIRATOR ASSEMBLY: HALF MASK, AIR-PURIFYING, COMBINATION CHEMICAL CARTRIDGE AND FILTER (FOR PESTICIDES AND ORGANIC VAPORS)
MIL-T-81998 Base Document:1975 TEST SET, RADIO SET AN/ARM-165
MIL-S-85018 Revision A:1978 SECOND ORDER ATTITUDE REFERENCE SYSTEM (SOARS) AN/ASN-116
MIL-G-17713 Revision D:1988 GAGES, LIQUID LEVEL MEASURING, TANK
SAE AMS 3731 : 2016 POTTING COMPOUND, EPOXY, BISPHENOL A-TYPE
MIL-I-7062 Revision C:1975 INDICATOR, POSITION, CONTROL SURFACES, 28 VOLT DC, GENERAL SPECIFICATION FOR
SAE AMS 3650 : 2012 RODS, SHEETS, AND MOLDED SHAPES, POLYCHLOROTRIFLURORETHYNEN (PCTFE) UNPLASTICIZED
MIL-I-7065 Revision A:1976 INDICATOR, POSITION, AILERON TRIM TAB
MIL-P-25518 Revision B:1981 Plastic Materials, Silicone Resin, Glass Fiber Base, Low Pressure Laminated
MIL-E-23001 Revision B:1976 ELECTRIC GENERATING SYSTEM, VARIABLE SPEED CONSTANT FREQUENCY, AIRCRAFT, GENERAL SPECIFICATION FOR
MIL F 8815 : D FILTER AND FILTER ELEMENTS, FLUID PRESSURE, HYDRAULIC LINE, 15 MICRON ABSOLUTE AND 5 MICRON ABSOLUTE, TYPE 11 SYSTEMS; GENERAL SPECIFICATION FOR
MIL T 27252 : A TEST SET, SYNCHRO, TTU-73/E DC SELSYN, AIRCRAFT INSTRUMENTS
SAE AMS 3695 : 2014 ADHESIVE FILM, EPOXY-BASE, FOR HIGH DURABILITY STRUCTURAL ADHESIVE BONDING
MIL-T-83460 Base Document:1975 TRANSDUCER, MOTIONAL PICKUP TRU-164/A
MIL D 9129 : D DISCHARGERS, ELECTROSTATIC - GENERAL SPECIFICATION FOR
MIL I 7627 : F INDICATOR, TURN AND SLIP 28V DC
MIL-R-81202 Revision D:1981 RECEIVER ASSEMBLY, NITROGEN, FOR LAU-7 SERIES LAUNCHERS
MIL-I-83152 Revision B:1974 INDICATOR, INDICATED-AIRSPEED AVU-22/A (INDICATOR-TRANSDUCER)
MIL-A-85055 Base Document:1979 AVIONICS SYSTEM PERFORMANCE SPECIFICATION FOR A-4M/AV-8 BOMBING SET, ANGLE RATE AN/ASB-19(V)
MIL-B-36558 Revision B:1992 BEDS, ADJUSTABLE
MIL-M-49199 Revision A:1985 MICROPHONE, LINEAR M-162/AIC GENERAL SPECIFICATIONS FOR
MIL D 83320 : 0 DETECTOR, MAGNETIC AZIMUTH DSU-14/A
MIL C 38214 : B COMPASS, MAGNETIC,MOUNTED
MIL-C-27298 Revision B:1980 CLOCK, AIRCRAFT, MECHANICAL ABU AND 9-A
MIL F 83861 : B FILTER ELEMENTS, NONCLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 5 AND 15 MICRON ABSOLUTE, TYPE 1I, SYSTEMS GENERAL SPECIFICATION FOR
MIL-T-38473 Revision A:1972 TIMER, PRECISION, BOMBING, 0 - 30 MINUTES
MIL-F-85421 Revision B:1986 FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, BEAM SEAM, 3000/4000 PSI - GENERAL SPECIFICATION FOR
MIL H 11996 : B HANDSET H-60/PT, HANDSET H-156/U, AND HANDSET H-165/U
MIL-C-8605 Revision B:1990 CAP, PRESSURE FUEL SERVICING
MIL-P-85833 Base Document:1989 PROTECTIVE ASSEMBLY, HELICOPTER AIRCREWMAN, CHEMICAL, BIOLOGICAL, RADIOLOGICAL
MIL E 85726 : A ENCLOSURE, STANDARD AVIONICS, FORCED AIR COOLED, GENERAL SPECIFICATION FOR
MIL-A-38140 Revision B:1977 ALTIMETER, PRESSURE AAU-16/A
MIL C 27536 : B COUPLING, CLAMP, GROOVED, V-BAND
GG-C-2736 Revision A:1987 CATHETER, CARDIOVASCULAR (FLOW DIRECTED, THERMODILUTION)
MIL-G-25597 Revision D:1973 GYROSCOPE, DISPLACEMENT, ROLL AND PITCH, TYPE MD-1
MIL-L-50794 Base Document:1973 LINEAR SHAPED CHARGE ASSEMBLY
MIL-I-6726 Revision B:1966 Inclinometer, Aircraft
MIL-C-87972 Revision A:1987 CASTERS, RIGID AND SWIVEL, GENERAL SPECIFICATION FOR
MIL P 28809 : A PRINTED WIRING ASSEMBLIES
MIL-E-17555 Revision H:1984 ELECTRONIC AND ELECTRICAL EQUIPMENT, ACCESSORIES, AND PROVISIONED ITEMS (REPAIR PARTS); PACKAGING OF
SAE AS 8905 : 2012 FITTINGS AND CARGO RINGS, TIE-DOWN, AIRCRAFT FLOOR
MIL-C-7135 Revision F:1967 Compressor, Pneumatic, 3,000 PSI -- 2 SCFM Aero 2A (*), Aero 2A-1 (*), Aero 2B (*), and Aero 2B-1 (*)
MIL I 7231 : B INDICATOR, TRUE AIRSPEED, SYNCHRO REPEATER TYPE N 1
MIL-STD-1546 Revision B:1992 PARTS, MATERIALS, AND PROCESSES CONTROL PROGRAM FOR SPACE AND LAUNCH VEHICLES
MIL-P-9024 Revision G:1972 PACKAGING, MATERIALS HANDLING AND TRANSPORTABILITY, SYSTEM AND SYSTEM SEGMENTS GENERAL SPECIFICATION FOR
MIL-M-38706 Revision A:1984 MULTIMETER
MIL P 83207 : B PITOT STATIC TUBE, NOSE BOOM, COMPENSATED, GENERAL SPECIFICATION FOR
MIL W 87893 : A WORKSTATION, ELECTROSTATIC DISCHARGE (ESD) CONTROL
SAE AMS 3636 : 2012 TUBING, PLASTIC, ELECTRICAL INSULATION, IRRADIATED POLYOLEFIN, PIGMENTED, FLEXIBLE, HEAT-SHRINKABLE, 2 TO 1 SHRINK RATIO
MIL-P-6457 Revision E:1974 POWER SUPPLY, METALLIC RECTIFIER TYPE, GENERAL SPECIFICATION FOR
MIL F 85406 : 0 FUSE SYSTEM, JOINT SERVICE ELECTRONIC BOMB FMU-139/B
MIL V 85855 : 0 VALVE, QUICK DISCONNECT, FOR THE PROTECTIVE ASSEMBLY, CHEMICAL, RADIOLOGICAL
MIL T 25620 : C TESTER, OXYGEN MASK, HEADSET AND MICROPHONE, TYPE MQ-1A
MIL-R-85669 Base Document:1988 REPEATER SET, RADIO, POD AN/ARQ-49
MIL I 27279 : B INDICATOR, MACH NUMBER AVU-11/A, INTEGRAL LIGHTING
MIL-C-5499 Revision B:1984 CORE, AIRCRAFT, HIGH PRESSURE AIR VALVE
MIL-I-27202 Revision A:1980 INDICATOR, ELECTRICAL TACHOMETER, 0-110 PERCENT RPM 2-INCH SIZE, INTEGRALLY LIGHTED
MIL-A-81724 Base Document:1969 ADAPTER, LAUNCHER, AIRCRAFT, ADU-299/E
MIL M 7584 : A METER, FUEL FLOW SYNCHRO STYLE TYPE B 3A
SAE AMS 1640 : 2011 CORROSION REMOVING COMPOUND, FOR AIRCRAFT SURFACES
SAE AMS 4750 : 2017 SOLDER, TIN-LEAD, 45SN - 55PB
SAE AS 8796 : 2013 HOSE, AIR DUCT, FLEXIBLE, AIRCRAFT
SAE AMS 5316E : 1987(S2017) Ductile (Nodular) Iron Castings, Sand 80,000 psi (550 MPa) Tensile Strength As Cast
SAE AMS 3572 : 2016 RESIN POLYURETHANE, FOAM-IN-PLACE, RIGID
SAE AMS 3676 : 2015 INSULATION, SOUND AND THERMAL, RESIN-BONDED GLASS FIBER, MEDIUM FILAMENT
DEFSTAN 00-970(PT0)/9(2012) : 2012 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
MIL-C-28809 Revision B:1988 CIRCUIT CARD ASSEMBLIES, RIGID, FLEXIBLE & RIGID FLEX
MIL-N-85353 Base Document:1981 NUTS (FASTENERS) INTERNALLY THREADED, PRELOAD LOCKING 450 DEG F 800 DEG F,1200 DEG F, GENERAL SPECIFICATION FOR
MIL-C-63550 Revision E:1985 CABLE ASSEMBLIES, ELECTRICAL, FABRICATION SPECIFICATION FOR
F-F-2790 Base Document:1991 FILTER, AIR EXTENDED AREA, INITIAL INSTALLATION
DEFSTAN 00-970(PT0)/14(2014) : 2014 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/7(2011) : 2011 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
MIL BULL 343 : A DOCUMENTS APPLICABLE TO AIRCRAFT ENGINES AND PROPELLERS, USE OF
MIL-T-81364 Base Document:1966 T-BOLT, 180,000 PSI TYPE 431 STAINLESS STEEL, MANUFACTURING PROCESS REQUIREMENTS
DEFSTAN 00-970(PT0)/11(2013) : 2013 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/12(2014) : 2014 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/13(2014) : 2014 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
MIL M 29212 : B NOTICE 1 MIXING PLANT, ASPHALT, DRUM TYPE, PORTABLE, ELECTRIC MOTOR DRIVEN, 120 TONS PER HOUR CAPACITY
DEFSTAN 00-970(PT0)/8(2011) : 2011 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
MIL-G-81559 Revision C:1984 GYROSCOPE ASSEMBLIES ATTITUDE - DIRECTIONAL REFERENCE INSTRUMENTS FOR AIRCRAFT PACKAGING OF
DEFSTAN 00-970(PT0)/10(2013) : 2013 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
MIL-C-85521 Base Document:1983 CONCENTRATOR, OXYGEN, GGU-7/A
MIL I 7067 : B INDICATOR, POSITION, FLAPS, 0 - 60 DEGREE MARKING, 2 INCH SIZE
MIL-C-85829 Base Document:1989 COUPLING ASSEMBLY, HOSE, CHEMICAL, BIOLOGICAL, RADIOLOGICAL PROTECTIVE
MIL-S-26547 Revision C:1985 STARTER-GENERATOR ENGINE STU-6A
MIL-I-6447 Revision C:1974 INDICATOR, TRUE AIRSPEED TYPE M 1A
MIL-STD-2097 Revision A:1989 ACQUISITION OF SUPPORT EQUIPMENT AND ASSOCIATED INTEGRATED LOGISTICS SUPPORT
MIL-R-85111 Revision A:1980 RECOVERY ASSIST SECURING AND TRAVERSING SYSTEM FOR LAMPS MK 111 HELICOPTER
SAE AMS 5384 : 2017 ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT, 53NI - 18CR - 18CO - 4.0MO - 2.9TI - 2.9AL - 0.006B, VACUUM-MELTED, VACUUM-CAST, SOLUTION AND PRECIPITATION HEAT TREATED
MIL A 28875 : 0 AMPLIFIER, RADIO FREQUENCY AND MICROWAVE, SOLID STATE, GENERAL SPECIFICATION FOR
MIL-F-29419 Base Document:1985 FRAME, SHIPPING [SIXCON]
MIL F 83870 : A FILTER ELEMENT, FLUID PRESSURE, TRANSMISSION, AIRCRAFT DISPOSABLE, 20 MICRON ABSOLUTE
MIL-I-85506 Base Document:1983 INDICATOR, INDICATED AIRSPEED, STANDBY TYPES I, II, AND III
SAE AMS 3733 : 2015 POTTING COMPOUND, EPOXY, TWO PART, HIGHLY FILLED, HEAT CURE, HIGH COMPRESSIVE STRENGTH
GGG-M-125-3 Revision A:1982 RESPIRATOR ASSEMBLIES: AIR LINE, WITH DISPOSABLE HOOD (SUPPLIED AIR)
GGG-M-125 Revision G:1985 RESPIRATOR AND RESPIRATOR ASSEMBLIES: AIR LINE; NON-POWERED AIR-PURIFYING AND POWERED AIR-PURIFYING
MIL-G-83872 Revision A:1977 GYROSCOPE, DISPLACEMENT, TYPE SBU-23/A
MIL-T-38049 Revision A:1972 TRANSMITTER, PRESSURE TRU 60A
GGG-M-125-2 Revision A:1982 RESPIRATOR ASSEMBLIES: AIR LINE, WITH HELMET (SUPPLIED AIR)
MIL-STD-726 Revision H:1985 PACKAGING REQUIREMENTS CODE
GGG-M-125-4 Revision C:1985 RESPIRATOR ASSEMBLY: HALF MASK, AIR-PURIFYING, CHEMICAL CARTRIDGE (FOR ORGANIC VAPORS)
MIL C 7958 : A CONTROL, PUSH PULL, FLEXIBLE AND RIGID
MIL-C-4109 Revision F:1986 COUPLING ASSEMBLY, LOW PRESSURE, AIR HOSE, QUICK-DISCONNECT
MIL-E-50796 Base Document:1973 EXPANDING SHIELDED MILD DETONATING CORD ASSEMBLY
SAE AS 5604 : 2012 COMPASS: MAGNETIC, PILOT'S STANDBY
MIL-A-81621 Base Document:1969 ACCELEROMETER, ELECTRICAL, LINEAR ABU-13/A
MIL-A-81918 Base Document:1976 ADAPTER, LAUNCHER, AIRCRAFT, ADU-299A/A
SAE AS 6302 : 2016 TRANSMITTER, PRESSURE, FUEL, 0-600 PSI
MIL F 28861 : B FILTER AND CAPACITOR, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, GENERAL SPECIFICATION FOR
GGG-M-125-11 Revision A:1982 RESPIRATOR ASSEMBLY: HELMET WITH POWERED AIR-PURIFYING UNIT (PORTABLE BACK-PACK)
MIL H 81529 : 0 HOOK, HELICOPTER EXTERNAL CARGO, 6,000 POUND CAPACITY TYPE A
MIL-D-81358 Revision B:1970 DISPLAY GROUP, TACTICAL DATA AN/ASA-66
MIL-T-23733 Revision A:1968 TRANSMITTER, RATE GYROSCOPE T-751 (/AJB-3)
MIL R 83178 : A REGULATOR, OXYGEN, DILUTER DEMAND, AUTOMATIC PRESSURE BREATHING, GENERAL SPECIFICATION FOR
MIL-I-25091 Revision B:1985 INDICATOR, CABIN AIR PRESSURE, PRESSURIZED AIRCRAFT, 1-7/8 INCH DIAL, TYPE MA-2
MIL V 7899 : C VALVE, CHECK, AIRCRAFT FUEL SYSTEM
MIL-T-25363 Revision D:1973 TANK, PNEUMATIC PRESSURE, AIRCRAFT, GLASS FIBER
MIL-C-42061 Base Document:1988 CAP, SCREW, BOTTLE AND JAR
MIL-R-42043 Base Document:1987 REGULATOR, OXYGEN
GG-W-239 Revision C:1985 WHEELS, ABRASIVE, (SILICON CARBIDE, MOUNTED, DENTAL)
GG-B-735 Revision B:1985 BRUSH, BRISTLE, DENTAL HANDPIECE (MANDREL MOUNTED)
MIL-Y-87125 Revision A:1979 YARN, GRAPHITE, 1000/3000 FILAMENTS
ZZ-H-461 Revision E:1986 HOSE AND HOSE ASSEMBLY, RUBBER, GAS (ACETYLENE HYDROGEN, AIR AND OXYGEN
MIL-T-85230 Revision A:1992 TARGET, TOW, AERIAL, TDU-34/A
MIL-B-37965 Base Document:1986 BURS, BONE SURGERY (CORROSION-RESISTING STEEL)
MIL-E-83510 Revision A:1980 EARPHONE ELEMENT
MIL W 3662 : B WIRE, PLATINUM ALLOY [PLATINUM RUTHENIUM, PLATINUM IRIDIUM
MIL-A-36188 Revision B:1989 APRON, DENTAL, PLASTIC
MIL M 26542 : D (1) SUPP 1 MICROPHONE, DYNAMIC, GENERAL SPECIFICATION FOR
SAE AMS 3713 : 2013 CORE, FLEXIBLE HONEYCOMB, POLYAMIDE PAPER BASE, PHENOLIC COATED
GG-S-1616 Revision A:1987 SCISSORS, COLLAR AND CROWN
GGG-M-125-1 Revision B:1982 RESPIRATOR ASSEMBLIES, AIR LINE, WITH FACE PIECE (SUPPLIED AIR)
SAE AMS 7245 : F1993 INSERTS, THREAD FORM, CORROSION RESISTANT STEEL - 18CR 9.2NI
MIL-A-81258 Base Document:1965 AMPLIFIER, RESOLVER, GENERAL SPECIFICATION FOR
WW-U-531 Revision F:1984 UNION, PIPE, STEEL OR MALLEABLE IRON, THREADED CONNECTION, 150 LB, 250 LB & 300 LB WSP
MIL-F-63051 Revision A:1985 FUZE, M934 SERIES ACTUATORS FOR
MIL T 25446 : D TRANSMITTER, TEMPERATURE, ELECTRICAL RESISTANCE
MIL H 81581/8 : 0 HOSE ASSEMBLIES, CABLE ASSEMBLIES, COMMUNICATION, ASSOCIATED
MIL-R-85895 Base Document:1988 RACK, BOMB EJECTOR, AIRCRAFT BRU-32/A
MIL-I-5133 Revision C:1953 INDICATOR, ATTITUDE TYPE J 8
MIL-T-21578 Revision A:1966 TEST EQUIPMENT, HAZARDOUS LOCATION, INSTALLED, BASIC REQUIREMENTS FOR
MIL-C-85019 Base Document:1976 COMPUTER, AIR NAVIGATION, TRUE AIRSPEED, MACH NUMBER, WIND COMPONENTS SUPERSONIC, TYPE MB-9
MIL-C-9082 Revision H:1986 CONVERTER, OXYGEN, AIRCRAFT, LIQUID TO GASEOUS, GENERAL SPECIFICATION FOR
SAE AMS 3625 : 2016 ELASTOMERIC TUBING, ELECTRICAL INSULATION, CROSSLINKED SILICONE, PIGMENTED, FLEXIBLE, HEAT-SHRINKABLE, 1.750 TO 1 SHRINK RATIO
MIL-A-85652 Base Document:1984 AMPLIFIER-MIXER AM-7157/DKT-59
MIL-P-83927 Revision B:1981 POWER SUPPLIES, GUIDED MISSILE LAUNCHERS, SINGLE TYPES PP-2401B/A PP-2401C/A PP-2401D/A, PP-4285/A, PP-4286/A, AND COMPOSITE TYPE PP-4506/A AND PS-1037
MIL-S-83427 Base Document:1974 SURVIVAL KIT CONTAINERS, CNU-129(V)/P AND CNU-130/P
MIL R 19648 : C RELAY, TIME DELAY, THERMAL GENERAL SPECIFICATION FOR
MIL-B-1107 Revision G:1986 BELT, INDIVIDUAL EQUIPMENT, M-1936
MIL-A-85648 Base Document:1983 AMPLIFIER, TRAVELING WAVE TUBE
MIL-C-81790 Revision A:1990 CONNECTORS, RECEPTACLE, EXTERNAL ELECTRIC POWER, AIRCRAFT, GENERAL SPECIFICATION FOR
MIL B 8075 : D BRAKE CONTROL SYSTEMS, ANTI SKID, AIRCRAFT WHEELS, INSTRUCTIONS FOR PREPARATION OF
MIL-M-85831 Base Document:1989 MASK, HELICOPTER AIRCREWMAN, CHEMICAL, BIOLOGICAL, RADIOLOGICAL PROTECTIVE, NON-OXYGEN
MIL-B-42017 Base Document:1986 BUR, BONE SURGERY (TUNGSTEN CARBIDE), GENERAL REQUIREMENTS FOR
MIL-C-38373 Revision B:1975 CAP, FLUID TANK FILLER
SAE AMS 3593 : 2017 TUBING, PLASTIC, ELECTRICAL INSULATION, IRRADIATED POLYVINYLIDENE FLUORIDE, SEMI-RIGID, HEAT-SHRINKABLE, MARKER SLEEVING GRADE, LOW OUTGASSING
MIL I 5356 : A INDICATOR AIRSPEED, PITOT STATIC TYPE L 7
SAE ARP 899 : 2013 TUBE FITTINGS, FLUID SYSTEMS, PERMANENT TYPE, GENERAL REQUIREMENTS FOR
SAE AMS 1775 : 2015 FABRIC, NYLON UPHOLSTERY, FIRE RETARDANT
SAE AMS 3894 : 2016 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated
SAE AMS 7440 : 2016 BALLS, STEEL, LOW-CHROMIUM, HIGH CARBON HARDENED AND TEMPERED
SAE AMS 4824 : 2015 BEARINGS, BABBITT-COATED LEADED-BRONZE STEEL BACK
MIL-L-9131 Revision H:1983 LIFE RAFTS, INFLATABLE, TWENTY MAN
SAE AMS 3903 : 2013 CLOTH, ORGANIC FIBER (PARA-ARAMID), HIGH MODULUS, EPOXY RESIN IMPREGNATED
MIL-T-17286 Revision D:1989 TURBINES AND GEARS, SHIPBOARD PROPULSION AND AUXILIARY STEAM, PACKAGING OF
SAE AMS 5358 : 2017 STEEL CASTINGS, INVESTMENT, CORROSION RESISTANT, 18CR - 9NI, SOLUTION HEAT TREATED
MIL-E-87236 Base Document:1985
MIL-I-5170 Revision C:1987 INDICATOR, POSITION, HORIZONTAL STABILIZER
MIL-S-8812 Revision D:1975 STEERING SYSTEM, AIRCRAFT GENERAL REQUIREMENTS FOR
SAE AMS 3816 : 2016 BRAID, FLAT, NYLON, ELECTRICAL TYING - WAX COATED
MIL-E-87235 Base Document:1985 EMERGENCY ESCAPE, AIRCRAFT (REQUEST FOR ISSUE MUST BE SENT VIA ASD/ENES, WRIGHT-PATTERSON AFB OH 45433-6503
MIL-HDBK-772 Base Document:1981 MILITARY PACKAGING ENGINEERING
MIL-S-8710 Revision B:1969 STRAINER, AIRFRAME FUEL SYSTEM, GENERAL SPECIFICATION FOR
GGG-M-125-5 Revision B:1985 RESPIRATOR ASSEMBLY: HALF MASK, AIR-PURIFYING PARTICULATE-FILTER (FOR DUSTS, FUMES, AND MISTS)
MIL-F-48863 Revision C:1985 FUZE, GUIDED MISSILE, M934E6 PARTS ASSEMBLY, LOADING & PACKING FOR
MIL-P-82579 Base Document:1973 POWER SUPPLY, MULTIVOLTAGE, DIRECT CURRENT (FOR TORPEDO TEST SET MARK 281 MOD 1)
MIL-T-81272 Base Document:1966 THERMOCOUPLE, ENGINE, CYLINDER, BAYONET TYPE, MS90324
MIL E 6058 : B NOTICE 1 ENGINE, AIRCRAFT, RECIPROCATING, PREPARATION FOR SHIPMENT AND STORAGE OF
MIL-V-8610 Revision B:1984 VALVE, FUEL SHUTOFF SOLENOID OPERATED, 28 VOLT, DC
MIL-I-25852 Revision B:1981 INDICATOR, TEMPERATURE, THERMO COUPLE EHU-4/A
MIL-I-9343 Revision C:1985 INDICATOR, TEMPERATURE, THERMOCOUPLE, ENGINE EXHAUST, TYPE MJ 1
MIL V 8057 : F VALVE, OXYGEN, PRESSURE BUILDUP AND VENT
MIL D 39030 : B DUMMY LOAD, ELECTRICAL, COAXIAL AND STRIPLINE
MIL D 22612 : C DETECTOR, CONTAMINATED FUEL
MIL-T-85703 Base Document:1984 TOOL, POWER DRIVE TLU 437/E
MIL-C-85518 Base Document:1984 COMPUTER SET, STANDARD AIRBORNE AN/AYK-14(V) GENERAL SPECIFICATION FOR
MIL-F-85596 Base Document:1983 FIN, RETARDER, AIR INFLATABLE BSU-85/B
MIL E 24021 : J NOTICE 1 ELECTRIC POWER MONITORS, EXTERNAL, AIRCRAFT
MIL-S-18471 Revision G:1983
MIL-I-87216 Base Document:1984 INSTRUMENT SYSTEMS, AIRBORNE REQUEST FOR ISSUE OTHER THAN DOD MUST BE SENT VIA; ASD/ENES, WRIGHT PATTERSON AFB OH 45433-6503
MIL-T-7771 Revision B:1980 TUBE, EXTENSION, GYRO STABILIZED DRIFT METER
MIL-I-81454 Base Document:1967 INDICATOR, GYROSCOPE, VERTICAL REFERENCE ID-1481 (*)/A
MIL W 3459 : D WIPER, WINDOW, ELECTRIC, PENDULUM TYPE (MARINE SERVICE, HEAVY DUTY)
MIL-M-21734 Revision C:1971 MICROPHONE, DYNAMIC, OXYGEN MASK M-94B/A
MIL-I-26382 Revision C:1994 INDICATOR SET, LIQUID OXYGEN QUANTITY A/A24J-4 AND A/A24J-8
SAE AMS 3897 : 2016 CLOTH, CARBON FIBER, RESIN IMPREGNATED
MIL H 8795 : D HOSE ASSEMBLY, RUBBER HYDRAULIC, FUEL AND OIL RESISTANT
MIL-R-7705 Revision B:1975 RADOME, GENERAL SPECIFICATION FOR
GG-R-1549 Revision A:1986
MIL-I-49466 Base Document:1990 INSULATOR; DISKS, PLATES & WASHERS GENERAL SPECIFICATION FOR
MIL-P-70343 Base Document:1990 PACKING, FIBERGLASS, ROPE & WICK
MIL-A-81852 Revision A:1986 ALTIMETER-ENCODER AAU-32/A
MIL-I-22075 Revision C:1984 Indicator, Bearing-Distance-Heading ID-663D/U
MIL-I-7063 Revision B:1979 INDICATOR, POSITION, RUBBER TRIM TAB
MIL-B-23071:C Blowers, Miniature, for Cooling Electronic Equipment General Specification for<br>
MIL-I-85832 Base Document:1989 INTERCOM, HELICOPTER AIRCREWMAN, CHEMICAL, BIOLOGICAL, RADIOLOGICAL PROTECTIVE SET
GG-R-1638 Revision A:1985 REMOVAL, DENTAL CROWN (SIMPLEX)
MIL-R-47321 Base Document:1987 REGULATOR, PRESSURE
MIL-M-4871 Revision C:1984 MAINTENANCE PLATFORM
MIL-R-38162 Revision B:1971 RADIOSONDE SET AN/AMT 13
SAE AMS 5363 : 2017 STEEL CASTINGS, SAND AND CENTRIFUGAL, CORROSION AND HEAT RESISTANT, 18.5CR - 10.5NI - 0.90 (CB+TA), SOLUTION HEAT TREATED
MIL C 22263 : B COUPLING FUEL LINE, FLEXIBLE, 125 PSI, GENERAL SPECIFICATION FOR
MIL-A-38202 Revision C:1972 AIRCRAFT ARRESTING SYSTEM BAK-12A/E32A; PORTABLE, ROTARY FRICTION
MIL C 5033 : C CLOCK, AIRCRAFT, CIVIL DATE 24 HOUR DIAL 2 3/4 IN DIAMETER
MIL-H-85042 Revision A:1983 HOOKS, BOMB RACK, GENERAL SPECIFICATION FOR
MIL-V-85033 Revision A:1981 VALVE CHARGING
MIL S 55041 : C SWITCH, WAVEGUIDE GENERAL SPECIFICATION FOR
MIL-C-85642 Base Document:1985 COMMUNICATIONS CENTRAL AN/ASC-26
MIL-C-83864 Revision A:1982 CONTAINER, INNER, SURVIVAL KIT
MIL-B-12841 Revision B:1970 BASIC ISSUE ITEMS FOR MILITARY VEHICLES, CARRIAGES AND EQUIPMENT; PREPARATION FOR SHIPMENT AND STORAGE
MIL-T-27200 Revision C:1975 TRANSMITTER, RATE GYROSCOPE TRU-2A/A
MIL-G-85468 Base Document:1981 GENERATOR CONTROL INDICATOR SG-118/AST-4(V)
MIL-I-5721 Revision C:1970 INDICATOR, INDICATED AIRSPEED 20-250 KNOTS
MIL I 9304 : B INDICATOR, RATE OF FLOW, FUEL, SYNCHRO STYLE 0-12,000 PPH TYPE MA 6
SAE AMS 3870 : 2016 CERAMIC MOLDINGS AND EXTRUSIONS, DENSE, ULTRA-HIGH ALUMINA (99% AL[2]O[3])
SAE AMS 7304 : 2015 SPRINGS, STEEL, 0.85 - 1.05C, HARDENED AND TEMPERED AFTER FORMING
MIL-F-63412 Base Document:1981 FUZE PROBE ASSEMBLY, PNEUMATIC ASSEMBLING & PACKING (TOW)
SAE AMS 2535 : 2015 COATING, VAPOR DEPOSITED POLY-MONOCHLORO-PARA-XYLYLENE FOR MICROCIRCUITS
SAE AMS 3843 : 2014 POLYTETRAFLUOROETHYLENE SHEET, ASBESTOS FIBER REINFORCED, HIGH COMPRESSIBILITY, LOW DENSITY
SAE AMS 3834 : 2016 CLOTH, TYPE 'E' GLASS, 'B' STAGE POLYESTER-RESIN-IMPREGNATED, 7781 STYLE FABRIC, FLAME RESISTANT, IMPROVED STRENGTH
SAE AMS 3632 : 2011 TUBING, PLASTIC, ELECTRICAL INSULATION, IRRADIATED POLYVINYLIDENE FLUORIDE, SEMI-RIGID, HEAT-SHRINKABLE, 2 TO 1 SHRINK RATIO
SAE AMS 5330 : 2015 STEEL CASTINGS, INVESTMENT, 0.80CR - 1.8NI - 0.35MO (0.38 - 0.46C) (SAE 4340 MODIFIED), ANNEALED
SAE AMS 1725 : 1986 SKIN PROTECTIVE COMPOUND, CHEMICAL BARRIER
SAE AMS 5409 : 1984 ALLOY CASTING, INVESTMENT, CORROSION AND HEAT RESISTANT 61NI - 16CR - 8.5CO - 1.8MO - 2.6W - 0.8CB - 3.4TI - 1.8TA - 3.4A1- 0.010B - 0.06ZR (0.03 - 0.08C), VACUUM MELTED, VACUUM CAST, AS CAST
SAE AMS 2510 : 2017 ENGINE GRAY FINISHING LOW BAKING
SAE AMS 3020 : 2013 OIL, REFERENCE, FOR 'L' STOCK RUBBER TESTING
SAE AMS 5315 : 2017 DUCTILE (NODULAR) IRON CASTINGS, SAND, 60,000 PSI (415 MPA) TENSILE STRENGTH, FERRITIZE ANNEALED
SAE AMS 7312 : 1983(S2016) PISTON RINGS, CENTRIFUGALLY-CAST IRON
SAE AMS 1548 : 2017 CLEANER, TURBINE ENGINE GAS PATH, SOLVENT EMULSION TYPE
SAE AS 1297 : 2008(S2014) REDUCERS, PNEUMATIC PRESSURE, MISSILE
SAE AMS 5395 : 2018 ALLOY IRON CASTINGS, DUCTILE, SAND, CORROSION RESISTANT, 22NI (2.5 - 3.0C), AS CAST
SAE AMS 3804 : 2016 CLOTH, AIRPLANE, COTTON, MERCERIZED, 65 POUNDS (290 N) BREAKING STRENGTH
SAE AMS 3582 : 2017 PLASTIC TUBING, ELECTRICAL INSULATION - CROSSLINKED POLYVINYL CHLORIDE, FLEXIBLE, HEAT SHRINKABLE, 2 TO 1 SHRINK RATIO
SAE ARP 618 : 2013 BOSS FITTINGS, METAL SEAL, FLUID SYSTEMS: GENERAL REQUIREMENTS FOR
SAE AMS 3689 : 2014 ADHESIVE, FOAMING, HONEYCOMB, CORE SPLICE, STRUCTURAL, -54 TO +177 DEGREES C (-65 TO +350 DEGREES F)
SAE AMS 2421 : 1979 PLATING MAGNESIUM FOR SOLDERABILITY - ZINC IMMERSION PROCESS
SAE AMS 3821 : 2015 CLOTH, TYPE 'E' GLASS, 'B' STAGE EPOXY-RESIN-IMPREGNATED 7781 STYLE FABRIC, FLAME RESISTANT
MIL H 38390 : C HOSE ASSEMBLY, TETRAFLUOROETHYLENE PNEUMATIC, HIGH PRESSURE
MIL G 6162 : B GENERATOR AND STARTER GENERATOR, ELECTRIC DIRECT CURRENT, NOMINAL 30 VOLTS AIRCRAFT GENERAL SPECIFICATION
MIL-G-81665 Base Document:1971 GENERATOR TRANSMITTER GROUP AN/ASA-76 (U)
MIL H 26633 : C HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, OXYGEN
MIL I 5099 : B INDICATOR CABIN AIR PRESSURE, 1-7/8 INCH DIAL, TYPE MA-1
MIL I 25725 : A INDICATOR, TORQUE PRESSURE, MAGNESYN STYLE, SINGLE CLAMP MOUNTED, 2 IN SIZE, 50-400 PSI TYPE A-8
MIL-B-37036 Revision A:1985 BUR, DENTAL, FINISHING (TUNGSTEN CARBIDE)
SAE AMS 5389 : 1987(R2017) ALLOY CASTINGS, SAND, CORROSION AND HEAT RESISTANT, 55NI - 16.5CR - 17MO - 4.5W - 5.8FE - 0.40V, SOLUTION HEAT TREATED
MIL-H-36364 Revision B:1990 HOLDER, RADIAC DETECTING ELEMENT, FILM BADGE TYPE
MIL-C-6720 Revision C:1964 CLOCK, AIRCRAFT, ELAPSED TIME, CIVIL DATE 24 HOUR 2 3/4 INCH DIAL
MIL G 8360 : A GAGE, PRESSURE, DIAL INDICATING, MANIFOLD PRESSURE, 10-75 IN MERCURY TYPE MB 1
MIL-B-28599 Revision C:1988 BAG, LINEMAN'S GLOVE
MIL-C-82576 Base Document:1973 CABLE ASSEMBLY, TEST (FOR TORPEDO TEST SET MARK 281 MOD 1)
MIL-C-1258 Revision D:1983 CUP, OIL, LUBRICATING AND OILERS, SELF-FEEDING
MIL T 6349 : C NOTICE 1 TEST SET, SYNCHRO
MIL F 15733 : G FILTERS & CAPACITORS, RADIO FREQUENCY INTERFERENCE
MIL-R-28894 Base Document:1986 RELAY, HYBRID OR SOLID STATE, SENSORS, ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR
MIL-I-12718 Revision F:1985 INSIGNIA, DISTINGUISHING, ARMY AND AIR FORCE, WOVEN
MIL-I-81508 Base Document:1966 INDICATOR PLUG, FOR MISSILE PROPELLANTS
DOD-I-85390 Base Document:1980 INDICATOR, TIME TEMPERATURE, CARD, CHEMICALLY ACTIVATED, METRIC
MIL-F-8905 Revision B:1967 FITTINGS AND CARGO RINGS, TIEDOWN, AIRCRAFT FLOOR
MIL-A-5034 Revision B:1979 ADAPTER, BOMB RACK, 30-INCH, AERO 1A
MIL M 7793 : F METER, TIME TOTALIZING
MIL-C-49468 Base Document:1990 CRYSTAL UNITS, QUARTZ, PRECISION, GENERAL SPECIFICATION FOR
MIL-A-25915 Revision A:1980 ACCELEROMETER, AIRCRAFT, PILOTS WARNING, TYPE MA-2
GG-T-585 Revision B:1986 TONOMETER, OPHTHALMIC, SCHIOTZ
GG-T-621 Revision C:1985 TRANSIT, ONE-MINUTE; AND TRANSIT TRIPODS
MIL-I-85352 Base Document:1980 INFLATOR ASSEMBLY AND GAGE ELEMENTS, PNEUMATIC PRESSURE REMOTE CONTROL, DIRECT READING
MIL-C-81991 Base Document:1975 CONVERTER, AIRCRAFT DC TO DC, BOOST GENERAL SPECIFICATION FOR
MIL-STD-1475 Base Document:1974 CONTAMINATION CONTROL TECHNOLOGY PACKAGING PROTECTION OF PRECISION CLEANED MATERIAL
MIL-A-83462 Base Document:1975 ARCTIC CUSHIONS - CLOTHING, CHU-10/P AND CHU-11/P
MIL-C-26485 Revision D:1968 CONTROL ASSEMBLY, ATTITUDE, GYROSCOPIC AF/A24G-1A
MIL-R-23761 Revision B:1975 Regulators, Voltage, and Control Panels Aircraft, Direct Current Generator, General Specification for
MIL-I-22126 Revision B:1972 INDICATOR, TORQUEMETER, ENGINE, TURBOPROP
MIL-T-85026 Revision D:1988 TEST SET AN/ASM-475 FOR THE AN/ASX-2 RECOGNITION SET
MIL I 83452 : LATEST INDICATOR, TAPE TYPE, GENERAL SPECIFICATION FOR
MIL C 25478 : B COOLER, LUBRICATING OIL, AIRCRAFT ENGINE, SYNTHETIC OIL, GENERAL SPECIFICATION FOR
MIL-M-28519 Revision A:1984 METER, VOLUMETRIC, POSITIVE DISPLACEMENT, LIQUID, AIRCRAFT FUEL, 6OO GPM
MIL A 25088 : C
MIL-R-83520 Base Document:1983 RELAYS, ELECTROMECHANICAL, GENERAL PURPOSE, NON-HERMETICALLY SEALED, PLASTIC ENCLOSURE (UST COVER)
MIL-B-36162 Revision C:1987 BLADES, LARYNGOSCOPE, MILLER
MIL I 83287 : E INDICATOR, FAULT LOCATING GENERAL SPECIFICATION FOR
MIL-A-18218 Revision B:1984 ANALYZERS, FLUE-GAS, ORSAT-TYPE, PORTABLE
MIL-S-26716 Revision A:1982 STAND, TEST, AIRCRAFT HYDRAULIC SYSTEMS, NON-PORTABLE
MIL-C-5026 Revision F:1984 CUTOUT RELAY, ENGINE GENERATOR
MIL G 8348 : H GAGE, ASSEMBLIES, AIR PRESSURE, DIAL INDICATING CHUCK TYPE SELF CONTAINED
MIL-G-7734 Revision C:1981 GAGE, PRESSURE ENGINE AND UTILITY AIRCRAFT
MIL O 38338 : C (1) OIL QUANTITY GAGING SYSTEM, CONTINUOUS TRANSISTORIZED NUCLEONIC, GENERAL SPECIFICATION FOR
MIL S 24251 : B SHIELD, RETAINER (BASES), AND ADAPTERS, ELECTRON TUBE, HEAT DISSIPATING, GENERAL SPECIFICATION FOR
MIL-H-27269 Revision A:1977 HORIZONTAL SITUATION INDICATOR GROUP AF A24J AND 1
SAE AMS 3802 : 2016 CLOTH, AIRPLANE, COTTON, MERCERIZED, 50 POUNDS (220 N) BREAKING STRENGTH
MIL C 38618 : A COUPLER, DRIVE ASSEMBLY GOVERNOR, FUZE BOMB MAU 87A B
SAE AS 85352 : 2011 INFLATOR ASSEMBLY AND GAGE ELEMENTS, PNEUMATIC PRESSURE, REMOTE CONTROL, DIRECT READING
MIL-I-23252 Revision B:1981 INDICATOR, PRESSURE
MIL I 8136 : A INDICATOR, FUEL FLOW RATE, SYNCHRO STYLE, SINGLE CLAMP MOUNTED 2 INCH SIZE 300 TO 3,000 PPH TYPE A 12
MIL-C-7488 Revision A:1974 COOLERS, OIL, PLATE, AIRCRAFT
SAE AMS 3818 :1993(S2016) BRAID, FLAT, POLYESTER, LACING AND TYING, SYNTHETIC RUBBER COATED, LOW OUTGASSING
MIL-I-27665 Revision B:1984 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE ABU-1O/A, -50 DEGREES TO +50 DEGREES C
GGG-M-125-6 Revision B:1985 RESPIRATOR ASSEMBLY: HALF MASK, AIR-PURIFYING, COMBINATION CHEMICAL CARTRIDGE AND FILTER (FOR PAINT SPRAY AND ORGANIC VAPORS)
MIL-I-27203 Revision B:1987 INDICATOR, POSITION, WING FLAP
MIL-E-85583 Revision A:1987 ELECTRIC POWER GENERATING CHANNEL, VARIABLE INPUT SPEED, ALTERNATING CURRENT, 400 HZ, AIRCRAFT, GENERAL SPECIFICATION FOR
MIL-P-85034 Base Document:1976 POWER PACKAGE, EMERGENCY AC/DC GENERATOR, RAM AIR TURBINE DRIVEN
MIL O 55310 : C OSCILLATOR, CRYSTAL, GENERAL SPECIFICATION FOR
GGG-M-125-9 Revision A:1982 RESPIRATOR ASSEMBLIES, AIR LINE, HOOD AND HELMET (FOR ABRASIVE BLASTING OPERATIONS)
MIL V 9050 : E (1) VALVE, OXYGEN, PRESSURE RELIEF, AIRCRAFT
SAE AMS 1450 : 1998 DISINFECTANT (INSECTICIDE), AIRCRAFT
SAE AMS 5375 : 1982 ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 65.5CO - 25CR - 1.8NI - 5.0W AS CAST
SAE AMS 5351 : 2017 STEEL CASTINGS, SAND, CORROSION AND MODERATE HEAT RESISTANT, 13CR, NORMALIZED AND TEMPERED
MIL-S-48405 Base Document:1973 Shielded and Confined Mild Detonating Cord Assemblies
SAE AMS 5348 : 2017 STEEL CASTINGS, TUBULAR, CENTRIFUGAL, CORROSION RESISTANT, 15CR - 4.6NI - 0.22 (CB+TA) - 2.8CU, SOLUTION HEAT TREATED
MIL H 7061 : B HOSE, RUBBER, AIRCRAFT, SELF SEALING, AROMATIC FUEL
MIL L 51167 : A LABORATORY, CHEMICAL, BASE, M2A1
MIL C 25369 : C CYLINDER, CARBON DIOXIDE, FOR INFLATION OF PNEUMATIC LIFE PRESERVERS
MIL-M-55565 Revision C:1988 MICROCIRCUITS, PACKAGING OF
MIL-A-27198 Revision B:1987 ALTIMETER, PRESSURE AAU-7/A
MIL-C-9075 Revision A:1968 COMPUTER AND TRANSMITTER, TRUE AIRSPEED, PITOT STATIC, 150-900 KNOTS, TYPE MA 1
MIL-I-27247 Revision C:1985 INDICATOR, TEMPERATURE, SYNCHRO
MIL B 83054 : B BAFFLE AND INERTING MATERIAL, AIRCRAFT FUEL TANK
MIL A 3933 : E ATTENUATORS, FIXED GENERAL SPECIFICATION FOR
SAE AMS 2550 : 2017 TREATMENT OF SHEET METAL PARTS, CORROSION-RESISTANT STEEL
MIL-A-23899 Revision B:1984 AURAL PROTECTOR, SOUND
MIL-V-23255 Revision B:1976 VALVE, PRESSURE RELIEF
MIL-I-8404 Revision A:1953 INDICATOR, PRESSURE, SINGLE 0 TO 35 PSI FUEL PRESSURE TYPE C 33
MIL D 81544 : A DISPENSER, PARACHUTE FLARE, SUU-44/A
MIL I 7491 : B INDICATOR RATE OF FLOW, FUEL TOTALIZING, SERVO STYLE, TYPE F 1
MIL-I-82577 Base Document:1973 INDICATOR, DIGITAL (FOR TORPEDO TEST SET MARK 281 MOD 1)
MIL-N-81207 Revision A:1973 NAVIGATIONAL SET, TACAN AN/ARN-84 (V)
MIL-A-27261 Revision A:1966 ACCELEROMETER, AIRCRAFT
MIL-STD-758 Revision C:1990 PACKAGING PROCEDURES FOR SUBMARINE REPAIR PARTS
MIL-I-81400 Base Document:1966 INSTRUMENT, AIRCRAFT, GENERAL SPECIFICATION FOR
MIL-A-22424 Revision A:1967 ADAPTERS, COMPENSATING, MS281O7, MA-1 COMPASS SYSTEM
SAE AIR 4728 : 2013 REFERENCES, SPACECRAFT AND SPACECRAFT SERVICING, FLUID SYSTEM COMPONENTS (ABBREVIATIONS, ACRONYMS, DEFINITIONS, APPLICABLE DOCUMENTS AND ENVIRONMENTAL CONDITIONS)
SAE AMS 5373 : 2017 ALLOY CASTINGS, SAND, CORROSION AND HEAT RESISTANT, 16CO - 29CR - 4.5W, AS CAST, UNS R30006
SAE AMS 4176 : 2001 HONEYCOMB CORE - FOR SANDWICH CONSTRUCTION 5056, 350-DEG F (175-DEG C)
SAE AMS 7878 : 1987 TUNGSTEN CARBIDE POWDER, COBALT COATED
SAE AMS 7464 : 2017 BOLTS AND SCREWS, STEEL, LOW-ALLOY HEAT RESISTANT, 222,000 PSI (1517 MPA) TENSILE STRENGTH, HARDENED AND TEMPERED, ROLL THREADED
SAE AMS 3815 : 2016 BRAID, FLAT, NYLON, ELECTRICAL TYING SYNTHETIC RUBBER COATED
SAE AMS 2690 : 2017 PARALLEL GAP, WELDING, MICROELECTRONIC INTERCONNECTIONS TO THIN FILM SUBSTRATES
SAE AMS5341:2012(S2017) STEEL CASTINGS, INVESTMENT, CORROSION RESISTANT, 19.5CR - 10.5NI - 0.25S (TYPE 303), SOLUTION HEAT TREATED
SAE AMS 7466 : 1993 BOLTS AND SCREWS - NICKEL ALLOY, CORROSION AND HEAT RESISTANT, UPSET HEADED, ROLL THREADED, FATIGUE RESISTANT
SAE AMS 3688 : 2014 ADHESIVE, FOAMING, HONEYCOMB CORE SPLICE, STRUCTURAL, -55 DEGREES C TO +82 DEGREES C (-65 DEGREES F TO +180 DEGREES F)
SAE AMS 2399 : 2011 ELECTROLESS NICKEL-BORON PLATING
SAE AMS 3813 : 2016 ROPE, ARAMID FIBER, JACKETED FOR ANTENNA-SUPPORT SYSTEMS
MIL-R-81498 Revision C:1979 RECEIVING-DECODING GROUP AN/ARA-63
MIL-T-81187 Base Document:1966 TRANSMITTER, RATE OF FUEL FLOW, SYNCHRO TYPE MS90361
MIL-G-23083 Revision C:1972 GYROSCOPE, RATE SWITCHING MS 17399
MIL-STD-1367 Revision A:1989 PACKAGING, HANDLING, STORAGE, AND TRANSPORTABILITY PROGRAM REQUIREMENTS (FOR SYSTEMS AND EQUIPMENTS)
MIL-A-25933 Revision B:1985 ALTIMETER, PRESSURIZED COMPARTMENT, INTEGRALLY LIGHTED 0-50,000 FEET, 1-7/8 INCH DIAL
MIL-F-8615 Revision D:1976 FUEL SYSTEM COMPONENTS, GENERAL SPECIFICATION FOR [ASG]
MIL-I-85112 Base Document:1978 INDICATOR SET, VERTICAL SCALE
MIL-T-27-233 Base Document:1978 TRANSFORMERS AND INDUCTORS (AUDIO POWER AND HIGH POWER PULSE) INDUCTOR CHARGING TF5S37ZZ
MIL-I-25130 Revision B:1974 INDICATOR, PRESSURE, OIL, 0-300PSI, TYPE MO-1
MIL T 21038 : D TRANSFORMERS, PULSE, LOW POWER, GENERAL SPECIFICATION FOR
MIL C 55330 : B CONNECTORS, PREPARATION FOR DELIVERY OF
MIL-A-26360 Revision B:1982 AMPLIFIER, ELECTRONIC CONTROL ASU-3/A
MIL-A-27330 Revision B:1987 ACCELEROMETER, ELECTRICAL, LINEAR TRU-3/A
MIL-B-23459 Revision D:1988 BUOY, HOSE SUPPORT, INFLATABLE
MIL V 9439 : D VALVE, OXYGEN, CYLINDER, HIGH PRESSURE
SAE AMS 4805 : 2012(S2018) BEARINGS, SINTERED METAL POWDER, 89CU - 10SN, OIL IMPREGNATED
MIL-W-6940 Revision D:1985 WIRE STRAND, STEEL, NONFLEXIBLE (PREFORMED)
MIL F 38642 : A FIN ASSEMBLY, BOMB, MXU-469/B AND MXU-467/B
MIL-F-85720 Base Document:1985 FITTING, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE, DYNAMIC BEAM, SEAL, GENERAL SPECIFICATION FOR
MIL T 83174 : B (3) TRANSMITTER, ACCELEROMETER, AXIAL
MIL-S-7470 Revision A:1975 SHAFT, POWER TRANSMISSION, AIRCRAFT ACCESSORY, GENERAL SPECIFICATION FOR
MIL-T-81838 Base Document:1971 TANK, FUEL, AIRCRAFT, AUXILIARY EXTERNAL 300 GALLON, TYPE AERO 1D
SAE AMS 2689 : 2016 FUSION WELDING TITANIUM AND TITANIUM ALLOYS
SAE AMS 3732 : 2015 POTTING COMPOUND, EPOXY ONE PART, FILLED, HEAT CURE, LOW CTE
SAE AMS 3912 : 2014 RADOMES, FOAM SANDWICH, POLYIMIDE/QUARTZ CLOTH CONSTRUCTION
MIL-I-25482 Revision D:1993 INDICATOR, ENGINE TESTING
MIL-A-85505 Base Document:1983 ALTIMETER, STANDBY, TYPES 1 AND 2
MIL-H-58108 Base Document:1986 HEADSET-MICROPHONE KIT MK-2193/AIC
MIL-I-7112 Revision B:1985 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, CYLINDER HEAD 0 DEGREES C TO 300 DEGREES C
MIL-M-29417 Base Document:1984 MODULE, FUEL PUMP [SIXCON]
MIL-N-25161 Revision C:1969 NOZZLE, AERIAL PRESSURE REFUELING, TYPE MA-2
MIL-G-26988 Revision C:1971 GAGE, LIQUID QUANTITY, CAPACITOR TYPE TRANSISTORIZED, GENERAL SPECIFICATION FOR
MIL-A-81605 Revision D:1984 ALTIMETER SET, ELECTRONIC AN/APN-194(V)
MIL-I-83245 Revision A:1994 INDICATOR SET, OIL PRESSURE A/A24J-17
SAE AMS 3579 : 2017 PLASTIC TUBING, ELECTRICAL INSULATION, NON-CROSSLINKED POLYVINYL CHLORIDE, FLEXIBLE, HEAT SHRINKABLE, 1.6 TO 1 SHRINK RATIO
MIL-I-27680 Revision C:1973 INDICATOR, ATTITUDE, ARU-12/A, REMOTE
SAE AS 85075 : 2000 TIE DOWN ASSEMBLY, HELICOPTER BLADE, GENERAL SPECIFICATION FOR
SAE AMS 5115 : 2017 Wire, Carbon Steel 0.60 - 0.75C Hardened and Tempered
SAE AMS 3684 : 2016 RESIN, POLYIMIDE, SEALING HIGH-TEMPERATURE RESISTANT, 315 DEGREES C (600 DEGREES F) UNFILLED
MIL-P-116 Revision J:1988 PRESERVATION, METHODS OF
MIL-A-29505 Base Document:1966 ANTENNA GROUP, TACAN, OE-273(V)/URN
MIL-P-85585 Base Document:1982 PROBES, EDDY CURRENT, UNSHIELDED, SINGLE COIL, ABSOLUTE
MIL T 25502 : C TRUE HEADING COMPUTER GROUP AN/AJA-I
MIL W 3970 : C WAVEGUIDE ASSEMBLIES, RIGID, GENERAL SPECIFICATION FOR
MIL-W-45562 Revision C:1992 WELDING AND SOLDERING EQUIPMENT, SUPPLIES AND ACCESSORIES, PACKAGING OF
MIL-I-81453 Revision A:1977 INTERROGATOR SET AN APX 76B(V)
MIL-I-27623 Revision C:1972 INDICATOR, ATTITUDE, REMOTE STANDBY, 2 INCH
MIL-T-85678 Base Document:1974 TRANSPONDER, RADAR TRACKING
MIL-I-25950 Revision B:1967 INDICATOR, PRESSURE, OIL, 0-100 PSI
MIL-I-7087 Revision A:1968 INDICATOR, PRESSURE OIL, 0-200 PSI
MIL-A-81296 Revision D:1985 ALTIMETER SET, ELECTRONIC AN/APN-171(V)
MIL-I-83117 Revision B:1975 INDICATOR, ANGLE OF ATTACK
MIL-H-21594 Revision C:1986 HOOKPOINT, AIRCRAFT ARRESTING
MIL-T-25485 Revision C:1974 TRANSMITTER, THRUST, SINGLE SYNCHRO STYLE, PRESSURE RATIO, TYPE MK-2
GG-E-916 Revision F:1987 EXPLORERS, DENTAL; EXPLORER-PROBE, DENTAL
MIL-C-26237 Revision C:1983 CRADLE, AIRCRAFT-MISSILE COMPONENTS MMU-1/E
MIL L 12606 : D LOUDSPEAKER, PERMANENT MAGNET (UNENCASED, 3 INCH AND 4 INCH DIAMETER CONE, 2 WATT, FUNGUS, GUNBLAST, AND IMMERSION RESISTANT), TYPE LL-445/U, M12606-01, AND M12606-02
MIL-B-42027 Base Document:1986 BROACH, PULP CANAL, BARBED, STERILE
MIL-C-87970 Base Document:1982 CONTROL SET, GYROSCOPE, ATTITUDE HEADING AN/ASN-129
MIL L 10911 : D LOUDSPEAKER, PERMANENT MAGNET (UNENCASED, 2.5-, 3-, 4-, 5-, 6-, 8-, 10-, AND 12-, INCH DIAMETER CONE)
MIL-S-81977 Base Document:1974 SIMULATOR, RADAR SIGNAL SM-697/UPQ-5
MIL-I-7084 Revision A:1988 INDICATOR, PRESSURE, HYDRAULIC 0-4,000 PSI
MIL-G-25591 Revision E:1981 GYROSCOPE, RATE, SWITCHING, TYPE MC-1
MIL-B-4330 Revision C:1984 BOOT, EXTREME COLD WEATHER
GG-B-101 Revision G:1986 BANDAGE, CAST, PLASTER OF PARIS IMPREGNATED (HARD COATED)
MIL-T-7258 Revision B:1985 TRANSMITTER, TEMPERATURE ELECTRICAL RESISTANCE TYPE B-4
MIL T 25435 : B TRANSMITTER, PRESSURE, AIRCRAFT, VARIABLE RELUCTANCE TYPE, GENERAL SPECIFICATION FOR
MIL-C-87975 Base Document:1985 CLOCK, AIRCRAFT, MECHANICAL ABU-32/A
GG-F-599 Revision B:1988 FORCEPS, DRESSING, DENTAL
MIL-E-22437 Revision E:1981 EQUIPMENT, DEGAUSSING FOR MCM SHIPS
MIL-A-25175 Revision C:1976 AIR TRANSPORT, NONTACTICAL, PACKING FOR
MIL-I-27619 Revision G:1974 INDICATORS, ATTITUDE DIRECTOR
MIL H 87961 : NOTICE 2 HOSE AND HOSE ASSEMBLIES, AIR DUCT, AIR BREATHING, OXYGEN SYSTEM GENERAL SPECIFICATION FOR
MIL-B-4792 Revision E:1994 BUMPER, RUBBER, DUPLEX ROUND
MIL I 27851 : B INDICATOR, INDICATED AIRSPEED AVU-17/A
MIL-C-38418 Revision E:1981 CONTROL ASSEMBLY, GYROSCOPE, ATTITUDE A/A24G-39
MIL-T-8249 Revision B:1979 TRANSMITTER, RATE OF FLOW, FUEL, TYPE MB-2
MIL-I-8974 Revision A:1981 INDICATOR, EVENT COUNTING, GENERAL SPECIFICATION FOR
MIL-A-28624 Revision B:1984 AUGER, EARTH, PORTABLE; HAND-HELD, TWO-MAN, GASOLINE-ENGINE DRIVEN
GG-R-1472 Revision B:1987 RETAINER, MATRIX, DENTAL (TOFFLEMIRE)
MIL T 26898 : B TEST SET, AIRFIELD LIGHTING SYSTEMS, TYPE MM-1
AA-S-130 Revision B:1991 SCREENS, BEDSIDE, ALUMINUM
MIL-B-27044 Revision C:1968 BOMB, PRACTICE BDU-12/B
MIL-C-22585 Revision A:1984 COMPUTER, PRESSURE REDUCTION, METEOROLOGICAL CP-402/UM()
MIL-P-85511 Revision A:1987 PANEL ASSEMBLY, TARGET, BANNER, AERIAL TDU-32 SERIES
MIL B 38634 : LATEST BOMB, FIRE, BLU 32A B
SAE AMS 3823 : 2015 CLOTH, GLASS, STYLE 7781, CHROME-SILANE FINISH
MIL-V-85830 Base Document:1989 VENTILATOR, TACTICAL, HELICOPTER AIRCREWMEN, CHEMICAL, BIOLOGICAL, RADIOLOGICAL PROTECTIVE
MIL C 25666 : E (1) CONVERTER, LIQUID OXYGEN, CAPACITANCE TYPE GAGING, GENERAL SPECIFICATION FOR
DOD-C-85050 Base Document:1982 CHARGERS, BATTERY, NICKEL-CADMIUM, AIRCRAFT, GENERAL SPECIFICATION FOR
SAE MA 1568 : 2018 NUT, SELF LOCKING - UNS S66286, 425 DEGREE C AND 650 DEGREE C, 1100 MPA, MJ THREAD, PROCUREMENT SPECIFICATION FOR, METRIC
MIL-C-81883 Base Document:1976 CONTROL GROUP, ELECTRIC POWER OK-XXX (V) A GENERAL SPECIFICATION FOR
MIL-I-7802 Revision A:1967 INDICATOR, MS 28088, TURN AND SLIP [THREE PHASE]
MIL-I-23832 Revision A:1980 INDICATOR, TACHOMETER, TRIPLE POINTER, HELICOPTER
MIL-D-38134 Revision A:1971 DETECTOR, MAGNETIC AZIMUTH DSU-4/A, HIGH TEMPERATURE
MIL-I-81049 Revision A:1972 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, VOLTAGE COMPENSATED, MULTIFUNCTION
GG-C-1320 Revision B:1985 CUP, POLISHING, DENTAL HANDPIECE (SCREW STEM)
MIL-T-5420 Revision B:1970 TUBE, PITOT STATIC, ELECTRICALLY HEATED, AIRCRAFT
MIL-R-17772 Revision C:1982 RADIATOR, HEATING, BASEBOARD PANEL, STEAM AND HOT WATER
GG-B-140 Revision D:1986 BATH, WATER, DENTAL IMPRESSION COMPOUND
GG-C-1282 Revision C:1985 CURETTES, ALVEOLAR (MOLT AND MILLER)
MIL-P-87133 Base Document:1978 PLOTTER, COMBAT MISSION PLU-6/C (AIR NAVIGATION)
MIL-I-42044 Revision A:1991 SEXUAL ASSAULT DETERMINATION KIT
MIL-T-4638 Revision B:1985 TESTERS, MATERIAL HARDNESS (ROCKWELL TYPE)
MIL I 83361 : (4) INDICATOR, PRESSURE OIL, DUAL EGU-18/A, 0-100 PSI
MIL-P-38136 Revision A:1969 PITOT STATIC TUBE COMPENSATED TRU 62/A
MIL M 5388 : B MACHMETER; PITOT STATIC OPERATED, RANGE 0.5 TO 1.5, TYPE A-2B
MIL R 85725 : 0 RACK, INTEGRATED AVIONICS, FORCED AIR COOLED, GENERAL SPECIFICATION FOR
MIL-L-5567 Revision F:1983 LIFE RAFTS, INFLATABLE 4 AND 7 MAN FOR AIRCRAFT USE
GGG-M-125-10 Revision A:1982 RESPIRATOR ASSEMBLY: HELMET WITH POWERED AIR-PURIFYING UNIT
GGG-M-125-8 Revision B:1985 RESPIRATOR ASSEMBLY: HALF MASK, AIR-PURIFYING PARTICULATE-FILTER (FOR DUSTS AND MISTS)
MIL-G-8170 Revision D:1987 GAGE, OIL PRESSURE, DIRECT INDICATING, SINGLE CLAMP MOUNTED 0 -200 PSI 320 DEGREE SCALE 2 INCH SIZE, TYPE AGU 12/A AND AGU 13/A
MIL-STD-834 Revision C:1974 PACKAGING DATA FORMS, INSTRUCTIONS FOR PREPARATION AND USE OF
MIL-A-85434 Revision A:1983 AMPLIFIER, TRAVELING WAVE TUBE AM-6937/DLQ-3B
MIL T 25627 : C TRANSMITTER, SYNCHRO, ANGLE OF ATTACK OR SIDESLIP
MIL-E-82578 Base Document:1973 ENCODER, SHAFT ANGLE POSITION, CYCLIC DECIMAL CODED (FOR TORPEDO TEST SET MARK 281 MOD 1)
MIL H 83776 : A HELMET, FLYER'S, WINTER
SAE AMS 7311 : 2017 PISTON RINGS, CENTRIFUGALLY-CASE ALLOYED IRON, 0.50MO - 0.50CU
SAE AMS 3081 : 1978 ANTI SCUFFING TREATMENT, GRAPHITE VARNISH
SAE AMS 1451 : 1998 DISINFECTANT, AIRCRAFT FOR USE IN CARGO COMPARTMENTS
SAE AS 23899 : 2012 AURAL PROTECTOR, SOUND
SAE AMS5328E:1987(S2017) STEEL CASTINGS, INVESTMENT, 0.80CR - 1.8NI - 0.35MO (0.28 - 0.36C) (SAE 4330 MODIFIED), ANNEALED

View more information
$32.74
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more