Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

SAE AMS 2430 : 2015

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

SHOT PEENING

Available format(s)

Hardcopy , PDF

Superseded date

15-04-2018

Language(s)

English

Published date

01-01-2015

1 SCOPE
2 APPLICABLE DOCUMENTS
3 TECHNICAL REQUIREMENTS
4 QUALITY ASSURANCE PROVISIONS
5 PREPARATION FOR DELIVERY
6 ACKNOWLEDGEMENT
7 REJECTIONS
8 NOTES
APPENDIX A - MANUAL PEENING
APPENDIX B - BATCH PEENING

Specifies the requirements for shot peening of surfaces of parts by impingement of media, including metallic, glass, or ceramic shot.

Committee
AMS-B
DevelopmentNote
Supersedes SAE AMS S 13165. (12/2007)
DocumentType
Revision
Pages
20
PublisherName
SAE International
Status
Superseded
SupersededBy
Supersedes

DIN EN ISO 15156-3:2015-12 PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS (ISO 15156-3:2015)
SAE AMS6450K : 2017 STEEL, SPRING WIRE 0.95CR - 0.22V (0.48 - 0.53C) (SAE 6150) ANNEALED AND COLD DRAWN
15/30269176 DC : 0 BS ISO 6336-5 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 5: STRENGTH AND QUALITY OF MATERIALS
MIL-DTL-5002 Revision E:2011 SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS
13/30261096 DC : 0 BS EN ISO 17945 - MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS
MIL-DTL-8878 Revision L:2014 TURNBUCKLES, POSITIVE SAFETYING, GENERAL SPECIFICATION FOR
MIL-STD-868 Revision B:2007 Nickel Plating, Low Embrittlement, Electro-Deposition
SAE ARP 1110 : 2015 MINIMIZING STRESS CORROSION CRACKING IN WROUGHT FORMS OF STEELS AND CORROSION RESISTANT STEELS AND ALLOYS
SAE AMSQQA367E:2012(S2018) ALUMINUM ALLOY FORGINGS
DIN EN ISO 15156-2:2015-12 PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015)
SAE AMS 2432 : 2013 SHOT PEENING, COMPUTER MONITORED
MIL-DTL-781 Revision J:2014 TERMINAL, WIRE ROPE SWAGING, GENERAL SPECIFICATION FOR
MIL STD 11991 : A GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES
MIL-STD-1587 Revision D:2017 MATERIAL AND PROCESS REQUIREMENTS FOR AEROSPACE WEAPONS SYSTEMS
MIL-DTL-32502 Base Document:2014 Coating, Cobalt-Phosphorus Alloy, Nanocrystalline (Electrodeposited)
SAE ARP 5812 : 2017 ACTUATORS, LINEAR MECHANICAL, GENERAL SPECIFICATION GUIDE
I.S. EN ISO 15156-2:2015&LC:2015 PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015)
EN ISO 15156-2:2015 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2015)
EN ISO 15156-3:2015 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2015)
SAE J 3020 : 2014 MEDICAL DEVICE SHOT PEENING
I.S. EN ISO 17945:2015 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015)
ISO 6336-5:2016 Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials
SAE AMS 5115 : 2017 Wire, Carbon Steel 0.60 - 0.75C Hardened and Tempered
MIL-STD-1879 Base Document:1983 COMPRESSOR ROTOR BLADES, GAS TURBINE TANK ENGINE, PROCESSING, INSPECTION AND IDENTIFICATION
BS EN ISO 15156-3:2015 Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
SAE AMS C 26074 : 2013 ELECTROLESS NICKEL COATINGS
SAE ARP 7488 : 2018 PEENING DESIGN AND PROCESS CONTROL GUIDELINES
SAE AMS 2775 : 2015 CASE HARDENING OF TITANIUM AND TITANIUM ALLOYS
BS EN ISO 15156-2:2015 Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production Cracking-resistant carbon and low alloy steels, and the use of cast irons
ISO 15156-3:2015 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
ISO 15156-2:2015 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
ISO 17945:2015 Petroleum, petrochemical and natural gas industries Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments
EN ISO 17945:2015 Petroleum, petrochemical and natural gas industries - Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments (ISO 17945:2015)
JSSG-2009 Revision A:2013 Air Vehicle Subsystems
BS EN ISO 17945:2015 Petroleum, petrochemical and natural gas industries. Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments
DIN EN ISO 17945:2015-08 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015)
BS ISO 6336-5:2016 Calculation of load capacity of spur and helical gears Strength and quality of materials
SAE AMS A 22771 : 2018 ALUMINUM ALLOY FORGINGS, HEAT TREATED
MIL STD 1867 : A
MIL-STD-1501 Revision F:2011 Chromium Plating, Low Embrittlement, Electrodeposition
MIL-STD-1568 Revision D:2015 Materials and Processes for Corrosion Prevention and Control in Aerospace Weapons Systems
I.S. EN ISO 15156-3:2015&LC:2015 PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS (ISO 15156-3:2015)

SAE AMS 2432 : 2013 SHOT PEENING, COMPUTER MONITORED
SAE AMS 2432 : 2013 SHOT PEENING, COMPUTER MONITORED
ASTM B 214 : 2016 : REDLINE Standard Test Method for Sieve Analysis of Metal Powders
SAE J 2277 : 2013 SHOT PEENING COVERAGE DETERMINATION
ASTM E 11 : 2017 : REDLINE Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
SAE AMS 2431 : 2010 PEENING MEDIA, GENERAL REQUIREMENTS

$240.32
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more