17/30371344 DC : 0
Current
The latest, up-to-date edition.
BS EN 4689 - AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION
Hardcopy , PDF
English
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Surface pretreatments
5 Classification
6 Batch release and qualification testing
7 Requirements for fibre reinforced composites
8 Designation
BS EN 4689.
Committee |
ACE/65
|
DocumentType |
Draft
|
Pages |
24
|
PublisherName |
British Standards Institution
|
Status |
Current
|
EN 2334 : 1997 | AEROSPACE SERIES - CHROMIC-SULPHURIC ACID PICKLE OF ALUMINIUM AND ALUMINIUM ALLOYS |
EN ISO 4628-2:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016) |
EN 4704:2012 | Aerospace series - Tartaric-Sulphuric-Acid anodizing of aluminium and aluminium wrought alloys for corrosion protection and paint pre-treatment (TSA) |
MIL-PRF-6081 Revision E:2014 | LUBRICATING OIL, JET ENGINE |
EN ISO 4628-8:2012 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect (ISO 4628-8:2012) |
PREN 3847 : 200P2 | AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF SEDIMENTATION RATING |
EN ISO 2431:2011 | Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011) |
EN 4687:2012 | Aerospace series - Paints and varnishes - Chromate free non corrosion inhibiting two components cold curing primer for military application |
DEFSTAN 68-10/1(1970) : 1970 | CORROSION PREVENTIVE COMPOUND: WATER DISPLACING. NATO CODE C-634 JOINT SERVICE DESIGNATION: PX-24 |
MIL-PRF-5606 Revision H:2002 | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
EN ISO 1524:2013 | Paints, varnishes and printing inks - Determination of fineness of grind (ISO 1524:2013) |
SAE AMS 1527 : 2014 | CLEANER FOR AIRCRAFT EXTERIOR SURFACES, WATER-MISCIBLE, FOAM-ON, PRESSURE-SPRAYING |
EN ISO 2811-2:2011 | Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011) |
EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
EN 4688:2012 | Aerospace series - Paints and varnishes - Corrosion inhibiting two components cold curing primer for military application |
EN ISO 3675:1998 | Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998) |
EN ISO 3251:2008 | Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008) |
EN ISO 9514:2005 | Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2005) |
EN ISO 2811-1:2016 | Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016) |
EN 2437 : 2001 | AEROSPACE SERIES - CHROMATE CONVERSION COATINGS (YELLOW) FOR ALUMINIUM AND ALUMINIUM ALLOYS |
EN ISO 2811-3:2011 | Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2011) |
EN ISO 16474-3:2013 | Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2013) |
EN ISO 1513:2010 | Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010) |
MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
EN ISO 3680:2004 | Determination of flash/no flash - Rapid equilibrium closed cup method (ISO 3680:2004) |
EN ISO 9117-1:2009 | Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009) |
EN ISO 1518-1:2011 | Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method (ISO 1518-1:2011) |
PREN 4160 : 200P1 | AEROSPACE SERIES - NON-METALLIC MATERIALS - PAINTS AND VARNISHES - TEST METHODS - DETERMINATION OF THE EFFECT OF THERMAL EXPOSURE |
EN 2101 : 1991 | AEROSPACE SERIES - CHROMIC ACID ANODIZING OF ALUMINIUM AND WROUGHT ALUMINIUM ALLOYS |
PREN 3837 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - NATURE AND METHOD FOR SURFACE PREPARATION OF TEST PIECES IN ALUMINIUM ALLOYS |
MIL-DTL-83133 Revision J:2015 | TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37) |
EN ISO 2811-4:2011 | Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:2011) |
EN ISO 1520:2006 | Paints and varnishes - Cupping test (ISO 1520:2006) |
EN ISO 11890-1:2007 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007) |
SAE AMS 1526 : 2008 | CLEANER FOR AIRCRAFT EXTERIOR SURFACES, WATER-MISCIBLE, PRESSURE-SPRAYING TYPE |
EN ISO 1519:2011 | Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011) |
EN ISO 3679:2015 | Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
SAE AMS 1533 : 2008 | CLEANER FOR EXTERIOR AIRCRAFT SURFACES, GEL-TYPE, SOLVENT-BASE |
EN ISO 11909:2007 | Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:2007) |
PREN 6042 : 200P1 | AEROSPACE SERIES - ORGANIC COMPOUNDS - TEST METHOD - ANALYSIS BY INFRARED SPECTROSCOPY |
EN ISO 3678:1995 | Paints and varnishes - Print-free test (ISO 3678:1976) |
EN 3840:2007 | Aerospace series - Paints and varnishes - Technical specification |
EN ISO 2813:2014 | Paints and varnishes - Determination of gloss value at 20°, 60° and 85° (ISO 2813:2014) |
EN ISO 9117-3:2010 | Paints and varnishes - Drying tests - Part 3: Surface-drying test using ballotini (ISO 9117-3:2010) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.