• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 14040:2006

Current

Current

The latest, up-to-date edition.

Environmental management Life cycle assessment Principles and framework

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

French, Spanish, Castilian, English, Russian

Published date

30-06-2006

ISO 14040:2006 describes the principles and framework for life cycle assessment (LCA) including: definition of the goal and scope of the LCA, the life cycle inventory analysis (LCI) phase, the life cycle impact assessment (LCIA) phase, the life cycle interpretation phase, reporting and critical review of the LCA, limitations of the LCA, the relationship between the LCA phases, and conditions for use of value choices and optional elements.

ISO 14040:2006 covers life cycle assessment (LCA) studies and life cycle inventory (LCI) studies. It does not describe the LCA technique in detail, nor does it specify methodologies for the individual phases of the LCA.

The intended application of LCA or LCI results is considered during definition of the goal and scope, but the application itself is outside the scope of this International Standard.

DevelopmentNote
Supersedes ISO/DIS 14040. 1997 version also revised by ISO 14044:2006. Together with ISO 14044, supersedes ISO 14041, ISO 14042 and ISO 14043. (07/2006) Supersedes ANSI/ISO 14040. (03/2014) New child AMD 1 2020 is added.
DocumentType
Standard
Pages
23
ProductNote
New child AMD 1 2020 is added.
PublisherName
International Organization for Standardization
Status
Current
Supersedes

CSA ISO 14031 : 2014 ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL PERFORMANCE EVALUATION - GUIDELINES
BS ISO 14066:2011 Greenhouse gases. Competence requirements for greenhouse gas validation teams and verification teams
09/30172555 DC : 0 BS ISO 15686-1 REV - BUILDINGS AND CONSTRUCTED ASSETS - SERVICE LIFE PLANNING - PART 1: GENERAL PRINCIPLES AND FRAMEWORK
UNE-ISO 14066:2012 Greenhouse gases. Competence requirements for greenhouse gas validation teams and verification teams.
BS EN 50598-3:2015 Ecodesign for power drive systems, motor starters, power electronics and their driven applications Quantitative eco design approach through life cycle assessment including product category rules and the content of environmental declarations
17/30294899 DC : 0 BS EN 60376 ED3.0 - SPECIFICATION OF TECHNICAL GRADE SULFUR HEXAFLUORIDE (SF[6]) AND COMPLEMENTARY GASES TO BE USED IN ITS MIXTURES FOR USE IN ELECTRICAL EQUIPMENT
16/30321997 DC : 0 BS ISO 13315-4 - ENVIRONMENTAL MANAGEMENT FOR CONCRETE AND CONCRETE STRUCTURES - PART 4: ENVIRONMENTAL DESIGN OF CONCRETE STRUCTURES
09/30200468 DC : 0 BS EN 15942 - SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - COMMUNICATION FORMAT - BUSINESS TO BUSINESS
BS EN 15804 : 2012 SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - CORE RULES FOR THE PRODUCT CATEGORY OF CONSTRUCTION PRODUCTS
ECMA 341 : 4ED 2010 ENVIRONMENTAL DESIGN CONSIDERATIONS FOR ICT & CE PRODUCTS
12/30274519 DC : 0 BS ISO 14067 - CARBON FOOTPRINT OF PRODUCTS - REQUIREMENTS AND GUIDELINES FOR QUANTIFICATION AND COMMUNICATION
UNI CEN/TS 16524 : 2013 MECHANICAL PRODUCTS - METHODOLOGY FOR REDUCTION OF ENVIRONMENTAL IMPACTS IN PRODUCT DESIGN AND DEVELOPMENT
CEN ISO/TS 14027:2018 Environmental labels and declarations - Development of product category rules (ISO/TS 14027:2017)
BS EN 62474:2012 Material declaration for products of and for the electrotechnical industry
PD ISO/TS 12720:2014 Sustainability in buildings and civil engineering works. Guidelines on the application of the general principles in ISO 15392
BS EN 16751:2016 Bio-based products. Sustainability criteria
DIN EN ISO 16559 E : 2014 SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS (ISO 16559:2014)
CEI EN 60376 : 2006 SPECIFICATION OF TECHNICAL GRADE SULFUR HEXAFLUORIDE (SF[6]) FOR USE IN ELECTRICAL EQUIPMENT
UNE-EN ISO 14004:2016 Environmental management systems - General guidelines on implementation (ISO 14004:2016)
12/30268269 DC : 0 BS EN 16485 - ROUND AND SAWN TIMBER - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR WOOD AND WOOD-BASED PRODUCTS FOR USE IN CONSTRUCTION
ISO 21931-1:2010 Sustainability in building construction Framework for methods of assessment of the environmental performance of construction works Part 1: Buildings
DIN EN 16757 E : 2017 SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR CONCRETE AND CONCRETE ELEMENTS
12/30253289 DC : 0 BS ISO 14955-1 - MACHINE TOOLS - ENVIRONMENTAL EVALUATION OF MACHINE TOOLS - PART 1: DESIGN METHODOLOGY FOR ENERGY-EFFICIENT MACHINE TOOLS
PD CEN/TR 17004:2016 Mechanical products. Conditions to set up environmental communication models by recognizing sectorial particularities
PD CEN/TS 16822:2015 Textiles and textile products. Self-declared environmental claims. Use of the terms
05/30094284 DC : DRAFT FEB 2005 ISO 14064-2 - GREENHOUSE GASES - PART 2: SPECIFICATION WITH GUIDANCE AT THE PROJECT LEVEL FOR QUANTIFICATION, MONITORING AND REPORTING OF GREENHOUSE GAS EMISSION REDUCTIONS OR REMOVAL ENHANCEMENTS
PD CEN/TS 16524:2013 Mechanical products. Methodology for reduction of environmental impacts in product design and development
AAMI ISO 11137-1 : 2006 : R2010 STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
05/30103391 DC : DRAFT APR 2005 ISO 14044 - ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - REQUIREMENTS AND GUIDELINES
16/30333286 DC : 0 BS ISO 14955-1 - MACHINE TOOLS - ENVIRONMENTAL EVALUATION OF MACHINE TOOLS - PART 1: DESIGN METHODOLOGY FOR ENERGY-EFFICIENT MACHINE TOOLS
BS EN ISO 14051:2011 Environmental management. Material flow cost accounting. General framework
14/30300963 DC : 0 BS EN 16757 - SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR PRECAST CONCRETE PRODUCTS
BS EN ISO 14045:2012 Environmental management. Eco-efficiency assessment of product systems. Principles, requirements and guidelines
BS ISO 17422:2002 Plastics. Environmental aspects. General guidelines for their inclusion in standards
BS EN ISO 14050:2010 Environmental management. Vocabulary
DIN EN 16311:2013-05 ENGINEERING SERVICES - TERMINOLOGY TO DESCRIBE ENGINEERING SERVICES FOR INDUSTRIAL PRODUCTS
CSA ISO 14025 : 2007 : R2012 ENVIRONMENTAL LABELS AND DECLARATIONS - TYPE 3 ENVIRONMENTAL DECLARATIONS - PRINCIPLES AND PROCEDURES
16/30292325 DC : 0 BS ISO 27917-1 - CARBON DIOXIDE CAPTURE, TRANSPORTATION AND GEOLOGICAL STORAGE - VOCABULARY - PART 1: CROSS-CUTTING TERMS
DIN EN ISO 11135:2014-10 STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014)
02/108000 DC : DRAFT DEC 2002 BS ISO 15686-6 - GUIDE FOR SERVICE LIFE DESIGN OF BUILDINGS - PART 6: GUIDELINES FOR LIFE CYCLE ASSESSMENT
11/30247591 DC : DRAFT JULY 2011 BS EN 16311 - ENGINEERING CONSULTANCY SERVICES - TERMINOLOGY AT A HIGH LEVEL TO DESCRIBE THE ENGINEERING SERVICES FOR INDUSTRIAL PRODUCTS
BS ISO 14034 : 2016 ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV)
PREN 15804 : DRAFT 2008 SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES
BS ISO 16759:2013 Graphic technology. Quantification and communication for calculating the carbon footprint of print media products
BS EN 62430:2009 Environmentally conscious design for electrical and electronic products
CEI UNI ISO/IEC TS 17021-4 : 2014 CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 4: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF EVENT SUSTAINABILITY MANAGEMENT SYSTEMS
06/30084693 DC : 0 BS ISO 15392 - SUSTAINABILITY IN BUILDING CONSTRUCTION - GENERAL PRINCIPLES
DIN EN ISO 15621:2016-06 (Draft) ABSORBENT INCONTINENCE AIDS FOR URINE AND/OR FAECES - GENERAL GUIDELINES ON EVALUATION (ISO 15621:2017)
BS ISO 15686-1:2011 Buildings and constructed assets. Service life planning General principles and framework
CSA Z17665-2 : 2009 : R2014 STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ISO 17665-1
ISO 16745-2:2017 Sustainability in buildings and civil engineering works — Carbon metric of an existing building during use stage — Part 2: Verification
PD ISO/TR 14032:2000 Environmental management. Examples of environmental performance evaluation (EPE)
04/300394 DC : DRAFT JAN 2004 IEC 61906 ED.1 - PROCEDURE FOR DECLARATION OF MATERIALS IN PRODUCTS OF THE ELECTROTECHNICAL AND ELECTRONICS INDUSTRY (DIN 19220
CSA R7003 : 2016 SUSTAINABILITY STANDARD FOR HOUSEHOLD CLOTHES WASHERS
CAN/CSA-ISO/TS 14048-03 (R2017) Environmental Management - Life Cycle Assessment - Data Documentation Format (Adopted ISO/TS 14048:2002, first edition, 2002-04-01)
CSA ISO 14064-2 : 2006 GREENHOUSE GASES - PART 2: SPECIFICATION WITH GUIDANCE AT THE PROJECT LEVEL FOR QUANTIFICATION, MONITORING AND REPORTING OF GREENHOUSE GAS EMISSION REDUCTIONS OR REMOVAL ENHANCEMENTS
CSA ISO 14937 : 2011 STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
ISO/TR 14073:2017 Environmental management Water footprint Illustrative examples on how to apply ISO 14046
DIN EN ISO 11135-1:2007-08 STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
CEI EN 62040-4 : 2014 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 4: ENVIRONMENTAL ASPECTS - REQUIREMENTS AND REPORTING
CSA R7001 : 2014 SUSTAINABILITY STANDARD FOR HOUSEHOLD REFRIGERATION APPLIANCES
CSA SPE 7005 : 2016 SUSTAINABILITY STANDARD FOR HOUSEHOLD CLOTHES DRYING APPLIANCES
ANSI/AAMI/ISO 14937:2009(R2013) STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
BIS IS 13072 : 2013 SPECIFICATION OF TECHNICAL GRADE SULFUR HEXAFLUORIDE (SF[6]) FOR USE IN ELECTRICAL EQUIPMENT
CSA ISO TR 14062 : 2003 ENVIRONMENTAL MANAGEMENT - INTEGRATING ENVIRONMENTAL ASPECTS INTO PRODUCT DESIGN AND DEVELOPMENT
XP ISO/TS 14071 : 2014 XP ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - CRITICAL REVIEW PROCESSES AND REVIEWER COMPETENCIES: ADDITIONAL REQUIREMENTS AND GUIDELINES TO ISO 14044:2006
S.R. CEN ISO/TS 14071:2016 ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - CRITICAL REVIEW PROCESSES AND REVIEWER COMPETENCIES: ADDITIONAL REQUIREMENTS AND GUIDELINES TO ISO 14044:2006 (ISO/TS 14071:2014)
IEEE C37.122.1-2014 REDLINE IEEE Guide for Gas-Insulated Substations Rated Above 52 kV
S.R. CWA 16633:2013 AGEING BEHAVIOUR OF STRUCTURAL COMPONENTS WITH REGARD TO INTEGRATED LIFETIME ASSESSMENT AND SUBSEQUENT ASSET MANAGEMENT OF CONSTRUCTED FACILITIES
AAMI/ISO TIR17665-3:2014(R2016) STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - GUIDANCE ON THE DESIGNATION OF A MEDICAL PRODUCT TO A PRODUCT FAMILY AND PROCESSING CATEGORY FOR STEAM STERILIZATION
ISO 8887-1:2017 Technical product documentation — Design for manufacturing, assembling, disassembling and end-of-life processing — Part 1: General concepts and requirements
CEN/CENELEC GUIDE 33 : 2016 GUIDE FOR ADDRESSING ENVIRONMENTAL ISSUES IN TESTING STANDARDS
I.S. EN 16575:2014 BIO-BASED PRODUCTS - VOCABULARY
CSA R7006 : 2018 SUSTAINABILITY STANDARD FOR HOUSEHOLD ROOM AIR CONDITIONING APPLIANCES
SPE-7002-14 Sustainability standard for household portable and floor care appliances (Bi-national standard, with AHAM 7002-2014 and UL 7002)
I.S. EN 60601-1-10:2008 MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS
I.S. EN 62430:2009 ENVIRONMENTALLY CONSCIOUS DESIGN FOR ELECTRICAL AND ELECTRONIC PRODUCTS
ANSI/AAMI/ISO 11135:2014 STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
I.S. EN ISO 14025:2010 ENVIRONMENTAL LABELS AND DECLARATIONS - TYPE 3 ENVIRONMENTAL DECLARATIONS - PRINCIPLES AND PROCEDURES
I.S. EN ISO 14021:2016 ENVIRONMENTAL LABELS AND DECLARATIONS - SELF-DECLARED ENVIRONMENTAL CLAIMS (TYPE 2 ENVIRONMENTAL LABELLING) (ISO 14021:2016)
ISO 13485 - PRACTICAL GUIDE : 2016 ISO 13485:2016 - MEDICAL DEVICES - A PRACTICAL GUIDE
UNE-EN 16575:2015 Bio-based products - Vocabulary
ISO 15686-6:2004 Buildings and constructed assets Service life planning Part 6: Procedures for considering environmental impacts
NSF 355 : 2011 GREENER CHEMICALS AND PROCESSES INFORMATION - GATE-TO-GATE INFORMATION ON CHEMICAL PRODUCTS AND THEIR MANUFACTURING PROCESSES
ISO 20400:2017 Sustainable procurement — Guidance
CSA ISO TR 14047 : 2004 ENVIRONMENTAL MANAGEMENT - LIFE CYCLE IMPACT ASSESSMENT - EXAMPLES OF APPLICATION OF ISO 14042
UNI EN 16214-4 : 2013 SUSTAINABILITY CRITERIA FOR THE PRODUCTION OF BIOFUELS AND BIOLIQUIDS FOR ENERGY APPLICATIONS - PRINCIPLES, CRITERIA, INDICATORS AND VERIFIERS - PART 4: CALCULATION METHODS OF THE GREENHOUSE GAS EMISSION BALANCE USING A LIFE CYCLE ANALYSIS APPROACH
ISO 16745-1:2017 Sustainability in buildings and civil engineering works — Carbon metric of an existing building during use stage — Part 1: Calculation, reporting and communication
CSA Z17665-1 : 2009 : FR STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
UNE-EN 16001:2010 Energy management systems - Requirements with guidance for use
I.S. ISO 14004:2005 ENVIRONMENTAL MANAGEMENT SYSTEMS - GENERAL GUIDELINES ON PRINCIPLES, SYSTEMS AND SUPPORTING TECHNIQUES
I.S. EN 16751:2016 BIO-BASED PRODUCTS - SUSTAINABILITY CRITERIA
EN 378-1:2016 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria
AAMI ISO 11137-1:2006 STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
UNE-EN ISO 15621:2018 Absorbent incontinence aids for urine and/or faeces - General guidelines on evaluation (ISO 15621:2017)
I.S. EN ISO 14046:2016 ENVIRONMENTAL MANAGEMENT - WATER FOOTPRINT - PRINCIPLES, REQUIREMENTS AND GUIDELINES (ISO 14046:2014)
PD CLC/TR 50600-99-1:2017 Information technology. Data centre facilities and infrastructures Recommended practices for energy management
CEN/TS 17159:2018 Societal and citizen security - Guidance for the security of hazardous materials (CBRNE) in healthcare facilities
ISO/IEC 17021-2:2016 Conformity assessment Requirements for bodies providing audit and certification of management systems Part 2: Competence requirements for auditing and certification of environmental management systems
PREN 378-1 : DRAFT 2013 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 1: BASIC REQUIREMENTS, DEFINITIONS, CLASSIFICATION AND SELECTION CRITERIA
UNI CEN/TR 15822 : 2010 PLASTICS - BIODEGRADABLE PLASTICS IN OR ON SOIL - RECOVERY, DISPOSAL AND RELATED ENVIRONMENTAL ISSUES
UNI EN ISO 14051 : 2011 ENVIRONMENTAL MANAGEMENT - MATERIAL FLOW COST ACCOUNTING - GENERAL FRAMEWORK
I.S. EN 16760:2015 BIO-BASED PRODUCTS - LIFE CYCLE ASSESSMENT
ASTM E 2774 : 2011 Standard Specification for Evaluation and Selection of Venues for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences (Withdrawn 2020)
ASTM E 1971 : 2005 : R2011 Standard Guide for Stewardship for the Cleaning of Commercial and Institutional Buildings
ISO Guide 64:2008 Guide for addressing environmental issues in product standards
ISO/TS 18110:2015 Nanotechnologies — Vocabularies for science, technology and innovation indicators
BS EN ISO 14043:2000 Environmental management. Life cycle assessment. Life cycle interpretation
BS EN ISO 14041:1998 Environmental management. Life cycle assessment. Goal and scope definition and inventory analysis
ISO 17989-1:2015 Tractors and machinery for agriculture and forestry Sustainability Part 1: Principles
ISO/TS 14071:2014 Environmental management — Life cycle assessment — Critical review processes and reviewer competencies: Additional requirements and guidelines to ISO 14044:2006
ISO 11135-1:2007 Sterilization of health care products Ethylene oxide Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices
BS EN ISO 14031:2013 Environmental management. Environmental performance evaluation. Guidelines
DIN EN 15942:2012-01 Sustainability of construction works - Environmental product declarations - Communication format business-to-business
CEN/TS 17035:2017 Surface Active Agents - Bio-based surfactants - Requirements and test methods
EN 62040-4:2013 Uninterruptible power systems (UPS) - Part 4: Environmental aspects - Requirements and reporting
CEN ISO/TS 14071:2016 Environmental management - Life cycle assessment - Critical review processes and reviewer competencies: Additional requirements and guidelines to ISO 14044:2006 (ISO/TS 14071:2014)
EN 60376:2005 Specification of technical grade sulfur hexafluoride (SF6) for use in electrical equipment
CEN/TR 15822:2009 Plastics - Biodegradable plastics in or on soil - Recovery, disposal and related environmental issues
DIN EN ISO 14042:2000-07 ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - LIFE CYCLE IMPACT ASSESSMENT
CEN/TS 16937:2016 Nanotechnologies - Guidance for the responsible development of nanotechnologies
CEN/TR 15941:2010 Sustainability of construction works - Environmental product declarations - Methodology for selection and use of generic data
EN 62542 : 2013 ENVIRONMENTAL STANDARDIZATION FOR ELECTRICAL AND ELECTRONIC PRODUCTS AND SYSTEMS - GLOSSARY OF TERMS (IEC 62542:2013)
CEN/CLC ISO/IEC/TS 17021-2:2016 Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 2: Competence requirements for auditing and certification of environmental management systems (ISO/IEC/TS 17021-2:2012)
CEN Guide 4:2008 GUIDE FOR ADDRESSING ENVIRONMENTAL ISSUES IN PRODUCT STANDARDS
EN ISO 16559 : 2014 COR 2014 SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS (ISO 16559:2014)
CEN ISO/TS 14067:2014 Greenhouse gases - Carbon footprint of products - Requirements and guidelines for quantification and communication (ISO/TS 14067:2013)
I.S. EN ISO 14020:2002 ENVIRONMENTAL LABELS AND DECLARATIONS - GENERAL PRINCIPLES
ASHRAE 189.1 : 2014 DESIGN OF HIGH-PERFORMANCE GREEN BUILDINGS
ISO/IEC 29142-3:2013 Information technology — Print cartridge characterization — Part 3: Environment
DIN ISO 26000:2011-01 Guidance on social responsibility (ISO 26000:2010)
CEI EN 62271-4 : 2014 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4: HANDLING PROCEDURES FOR SULPHUR HEXAFLUORIDE (SF[6]) AND ITS MIXTURES
08/30184566 DC : DRAFT JUNE 2008 BS ISO 21931-1 - SUSTAINABILITY IN BUILDING CONSTRUCTION - FRAMEWORK FOR METHODS OF ASSESSMENT FOR ENVIRONMENTAL PERFORMANCE OF CONSTRUCTION WORKS - PART 1: BUILDINGS
09/30154135 DC : 0 BS EN 62474 - MATERIAL DECLARATION FOR ELECTRICAL AND ELECTRONIC EQUIPMENT
PD ISO/IEC TS 17021-4:2013 Conformity assessment. Requirements for bodies providing audit and certification of management systems Competence requirements for auditing and certification of event sustainability management systems
BS ISO 14052 : 2017 ENVIRONMENTAL MANAGEMENT - MATERIAL FLOW COST ACCOUNTING - GUIDANCE FOR PRACTICAL IMPLEMENTATION IN A SUPPLY CHAIN
DIN EN 16751 E : 2016 BIO-BASED PRODUCTS - SUSTAINABILITY CRITERIA
I.S. EN 62271-4:2013 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4: HANDLING PROCEDURES FOR SULPHUR HEXAFLUORIDE (SF[6]) AND ITS MIXTURES (IEC 62271-4:2013 (EQV))
16/30302061 DC : 0 BS 6349-5 - MARITIME WORKS - PART 5: CODE OF PRACTICE FOR DREDGING AND RECLAMATION
BS EN 16311:2013 Engineering services. Terminology to describe engineering services for industrial products
UNI EN ISO 14050 : 2010 ENVIRONMENTAL MANAGEMENT - VOCABULARY
13/30286759 DC : 0 BS ISO GUIDE 82 - GUIDE FOR ADDRESSING SUSTAINABILITY IN STANDARDS
I.S. EN ISO 14041:1999 ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - GOAL AND SCOPE DEFINITION AND INVENTORY ANALYSIS
DIN ISO 13065 E : 2017 SUSTAINABILITY CRITERIA FOR BIOENERGY (ISO 13065:2015)
11/30244621 DC : 0 BS EN 16214-4 - SUSTAINABLY PRODUCED BIOMASS FOR ENERGY APPLICATIONS - PRINCIPLES, CRITERIA, INDICATORS AND VERIFIERS FOR BIOFUELS AND BIOLIQUIDS - PART 4: CALCULATION METHODS OF THE GREENHOUSE GAS EMISSION BALANCE USING A LIFE CYCLE ANALYSIS
15/30323537 DC : 0 BS EN 16887 - LEATHER - ENVIRONMENTAL FOOTPRINT - PRODUCT CATEGORY RULES (PCR) - CARBON FOOTPRINTS
PD ISO/TR 14062:2002 Environmental management. Integrating environmental aspects into product design and development
16/30302523 DC : 0 BS EN ISO 15621 - ABSORBENT INCONTINENCE AIDS FOR URINE AND/OR FAECES - GENERAL GUIDELINES ON EVALUATION
09/30213269 DC : 0 BS EN 62271-4 ED1 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4: USE AND HANDLING OF SULPHUR HEXAFLUORIDE (SF[6])
11/30230661 DC : 0 BS ISO 16311-3 - MAINTENANCE AND REPAIR OF CONCRETE STRUCTURES - PART 3: DESIGN OF REPAIRS AND PREVENTION
14/30300969 DC : 0 BS EN 16760 - BIO-BASED PRODUCTS - LIFE CYCLE ASSESSMENT
CEI EN 62474 : 2013 MATERIAL DECLARATION FOR PRODUCTS OF AND FOR THE ELECTROTECHNICAL INDUSTRY
DIN CEN ISO/TS 14071;DIN SPEC 35803:2016-06 ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - CRITICAL REVIEW PROCESSES AND REVIEWER COMPETENCIES: ADDITIONAL REQUIREMENTS AND GUIDELINES TO ISO 14044:2006 (ISO/TS 14071:2014)
BS ISO 14026 : 2017 ENVIRONMENTAL LABELS AND DECLARATIONS - PRINCIPLES, REQUIREMENTS AND GUIDELINES FOR COMMUNICATION OF FOOTPRINT INFORMATION
PD CEN/TR 13910:2010 Packaging. Report on criteria and methodologies for life cycle analysis of packaging
13/30291771 DC : DRAFT DEC 2013 BS EN 378-1 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 1: BASIC REQUIREMENTS, DEFINITIONS, CLASSIFICATION AND SELECTION CRITERIA
NSF AWWA/ANSI 375 - 2016 SUSTAINABILITY ASSESSMENT FOR WATER CONTACT PRODUCTS
DIN EN 16575 E : 2014 BIO-BASED PRODUCTS - VOCABULARY
13/30282414 DC : 0 ISO/IEC DTS 17021-4 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 4: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF EVENT SUSTAINABILITY MANAGEMENT
10/30199133 DC : 0 BS ISO 14051 - ENVIRONMENTAL MANAGEMENT - MATERIAL FLOW COST ACCOUNTING - GENERAL FRAMEWORK
UNI CEI ISO/IEC TS 17021-2 : 2013 CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 2: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF ENVIRONMENTAL MANAGEMENT SYSTEMS
11/30235901 DC : 0 BS ISO 21929-2 - SUSTAINABILITY IN BUILDINGS AND CIVIL ENGINEERING WORKS - SUSTAINABILITY INDICATORS - PART 2: FRAMEWORK FOR THE DEVELOPMENT OF INDICATORS FOR CIVIL ENGINEERING WORKS
PD ISO/TS 17665-3:2013 Sterilization of health care products. Moist heat Guidance on the designation of a medical device to a product family and processing category for steam sterilization
16/30339654 DC : 0 BS EN ISO/IEC 17021-2 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 2: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF ENVIRONMENTAL MANAGEMENT SYSTEMS
DIN EN 15804:2014-07 SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - CORE RULES FOR THE PRODUCT CATEGORY OF CONSTRUCTION PRODUCTS
UNE-ISO/IEC TS 17021-2:2013 Conformity assessment -- Requirements for bodies providing audit and certification of management systems. Part 2: Competence requirements for auditing and certification of environmental management systems
PD CEN/CLC ISO/IEC TS 17021-2:2016 Conformity assessment. Requirements for bodies providing audit and certification of management systems Competence requirements for auditing and certification of environmental management systems
BS ISO 16745-2:2017 Sustainability in buildings and civil engineering works. Carbon metric of an existing building during use stage Verification
BS EN ISO 14046:2016 Environmental management. Water footprint. Principles, requirements and guidelines
PD CLC/TR 62271-303:2009 High-voltage switchgear and controlgear Use and handling of sulfur hexafluoride (SF6)
CSA ISO 26000 : 2016 GUIDANCE ON SOCIAL RESPONSIBILITY
14/30231508 DC : 0 BS ISO 13065 - SUSTAINABILITY CRITERIA FOR BIOENERGY
08/30177231 DC : DRAFT APR 2008 BS EN 15804 - SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES
UNI CEI EN 16001 : 2009 ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE
PD IEC/TR 62921:2016 Quantification methodology for greenhouse gas emissions for computers and monitors
03/301880 DC : DRAFT FEB 2003 IEC 62139 ED.1 - GUIDANCE FOR ADDITION OF ENVIRONMENTAL ASPECTS IN PRODUCT STANDARDS
UNI EN ISO 14045 : 2012 ENVIRONMENTAL MANAGEMENT - ECO-EFFICIENCY ASSESSMENT OF PRODUCT SYSTEMS - PRINCIPLES, REQUIREMENTS AND GUIDELINES
DIN EN 16887:2015-07 (Draft) LEATHER - ENVIRONMENTAL FOOTPRINT - PRODUCT CATEGORY RULES (PCR) - CARBON FOOTPRINTS
BS ISO 14955-1:2017 Machine tools. Environmental evaluation of machine tools Design methodology for energy-efficient machine tools
17/30365666 DC : 0 BS EN 62474 - MATERIAL DECLARATION FOR PRODUCTS OF AND FOR THE ELECTROTECHNICAL INDUSTRY
UNE-EN 16810:2017 Resilient, textile and laminate floor coverings - Environmental product declarations - Product category rules
12/30253051 DC : 0 BS ISO 16759 - GRAPHIC TECHNOLOGY - QUANTIFICATION AND COMMUNICATION FOR CALCULATING THE CARBON FOOTPRINT OF PRINT MEDIA PRODUCTS
08/30172145 DC : DRAFT FEB 2008 BS EN 16001 - ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE
11/30231694 DC : 0 BS EN 62040-4 - UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 4: ENVIRONMENTAL ASPECTS - REQUIREMENTS AND REPORTING
04/30048205 DC : DRAFT JUL 2004 BS EN ISO 17665 - STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
I.S. EN ISO 14051:2011 ENVIRONMENTAL MANAGEMENT - MATERIAL FLOW COST ACCOUNTING - GENERAL FRAMEWORK (ISO 14051:2011)
16/30282538 DC : 0 BS ISO 20140-5 - AUTOMATION SYSTEMS AND INTEGRATION - EVALUATING ENERGY EFFICIENCY AND OTHER FACTORS OF MANUFACTURING SYSTEMS THAT INFLUENCE THE ENVIRONMENT - PART 5: ENVIRONMENTAL INFLUENCE EVALUATION DATA
TS 103 199 : 1.1.1 ENVIRONMENTAL ENGINEERING (EE); LIFE CYCLE ASSESSMENT (LCA) OF ICT EQUIPMENT, NETWORKS AND SERVICES; GENERAL METHODOLOGY AND COMMON REQUIREMENTS
NF EN ISO 14025 : 2010 ENVIRONMENTAL LABELS AND DECLARATIONS - TYPE 3 ENVIRONMENTAL DECLARATIONS - PRINCIPLES AND PROCEDURES
CSA ISO 14044 : 2006 : R2011 ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - REQUIREMENTS AND GUIDELINES
BS ISO 15686-3:2002 Buildings and constructed assets. Service life planning Performance audits and reviews
CSA ISO TS 14048 : 2003 : R2012 ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - DATA DOCUMENTATION FORMAT
ISO/TR 14047:2012 Environmental management Life cycle assessment Illustrative examples on how to apply ISO 14044 to impact assessment situations
UNE-EN ISO 17989-1:2016 Tractors and machinery for agriculture and forestry - Sustainability - Part 1: Principles (ISO 17989-1:2015)
CSA ISO 14025:2007 ENVIRONMENTAL LABELS AND DECLARATIONS - TYPE 3 ENVIRONMENTAL DECLARATIONS - PRINCIPLES AND PROCEDURES
S.R. CEN/TS 17035:2017 SURFACE ACTIVE AGENTS - BIO-BASED SURFACTANTS - REQUIREMENTS AND TEST METHODS
ASTM E 3012 : 2016 Standard Guide for Characterizing Environmental Aspects of Manufacturing Processes
DIN EN ISO 17989-1 E : 2016 TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SUSTAINABILITY - PART 1: PRINCIPLES (ISO 17989-1:2015)
ISO 21929-1:2011 Sustainability in building construction — Sustainability indicators — Part 1: Framework for the development of indicators and a core set of indicators for buildings
UNI CEN ISO/TS 17665-2 : 2009 STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ISO 17665-1
NF EN 60376 : 2005 SPECIFICATION OF TECHNICAL GRADE SULFUR HEXAFLUORIDE (SF6) FOR USE IN ELECTRICAL EQUIPMENT
IEC GUIDE 109:2012 Environmental aspects - Inclusion in electrotechnical product standards
S.R. CEN/TS 16524:2013 MECHANICAL PRODUCTS - METHODOLOGY FOR REDUCTION OF ENVIRONMENTAL IMPACTS IN PRODUCT DESIGN AND DEVELOPMENT
ISO 21930:2017 Sustainability in buildings and civil engineering works — Core rules for environmental product declarations of construction products and services
ISO/TS 19930:2017 Guidance on aspects of a risk-based approach to assuring sterility of terminally sterilized, single-use health care product that is unable to withstand processing to achieve maximally a sterility assurance level of 10-6
CSA SPE 7007 : 2017 SUSTAINABILITY STANDARD FOR HOUSEHOLD MICROWAVE OVEN APPLIANCES
UNE-CEN/TR 15822:2011 IN Plastics - Biodegradable plastics in or on soil - Recovery, disposal and related environmental issues
UNE-EN 50598-3:2015 Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Part 3: Quantitative eco design approach through life cycle assessment including product category rules and the content of environmental declarations
AAMI ISO TIR 17665-2 : 2009 STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ANSI/AAMI/ISO 17665-1
PREN 16760 : DRAFT 2014 BIO-BASED PRODUCTS - LIFE CYCLE ASSESSMENT
ISO 9004:2018 Quality management — Quality of an organization — Guidance to achieve sustained success
BS EN 62075:2012 Audio/video, information and communication technology equipment. Environmentally conscious design
I.S. EN 16887:2017 LEATHER - ENVIRONMENTAL FOOTPRINT - PRODUCT CATEGORY RULES (PCR) - CARBON FOOTPRINTS
S.R. CEN ISO/TS 14027:2018 ENVIRONMENTAL LABELS AND DECLARATIONS - DEVELOPMENT OF PRODUCT CATEGORY RULES (ISO/TS 14027:2017)
ISO/TS 14033:2012 Environmental management Quantitative environmental information Guidelines and examples
I.S. EN 16766:2017 BIO-BASED SOLVENTS - REQUIREMENTS AND TEST METHODS
S.R. CEN/CLC ISO/IEC/TS 17021-2:2016 CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 2: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF ENVIRONMENTAL MANAGEMENT SYSTEMS (ISO/IEC/TS 17021-2:2012)
I.S. EN 15530:2008 ALUMINIUM AND ALUMINIUM ALLOYS - ENVIRONMENTAL ASPECTS OF ALUMINIUM PRODUCTS - GENERAL GUIDELINES FOR THEIR INCLUSION IN STANDARDS
ISO/TR 14025:2000 Environmental labels and declarations Type III environmental declarations
AHAM 7002 : 2014 SUSTAINABILITY STANDARD FOR HOUSEHOLD PORTABLE AND FLOOR CARE APPLIANCES
IWA 19:2017 Guidance principles for the sustainable management of secondary metals
ISO 19867-1:2018 Clean cookstoves and clean cooking solutions — Harmonized laboratory test protocols — Part 1: Standard test sequence for emissions and performance, safety and durability
UNI CEN ISO/TS 14067 : 2014 GREENHOUSE GASES - CARBON FOOTPRINT OF PRODUCTS - REQUIREMENTS AND GUIDELINES FOR QUANTIFICATION AND COMMUNICATION
IEC TR 62422:2007 Environmental characterization of solid insulating materials
ACI 233R : 2017 GUIDE TO THE USE OF SLAG CEMENT IN CONCRETE AND MORTAR
CSA Z17665-2:09 (R2019) Sterilization of health care products — Moist heat — Part 2: Guidance on the application of ISO 17665-1 (ISO/TS 17665-2:2009, IDT)
EN 16991:2018 Risk-based inspection framework
CSA C22.2 No. 60601-1-10 : 2009 : R2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS
ISO 14044:2006 Environmental management Life cycle assessment Requirements and guidelines
CSA C22.2 No. 60601-1-10:2009 MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS
UNI EN ISO 11135 : 2014 STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
PREN 17228 : DRAFT 2018 PLASTICS - BIO-BASED POLYMERS, PLASTICS, AND PLASTIC PRODUCTS - TERMINOLOGY, CHARACTERISTICS AND COMMUNICATION
ASTM E 2432 : 2017 : REDLINE GUIDE FOR GENERAL PRINCIPLES OF SUSTAINABILITY RELATIVE TO BUILDINGS
EN 15804:2012 Sustainability of construction works - Environmental product declarations - Core rules for the product category of construction products
IEC TR 62837:2013 Energy efficiency through automation systems
NSF 426 : 2017 ENVIRONMENTAL LEADERSHIP AND CORPORATE SOCIAL RESPONSIBILITY ASSESSMENT OF SERVERS
IEC PAS 61906:2005 Procedure for the declaration of materials in products of the electrotechnical and electronic industry
EN 62430:2009 Environmentally conscious design for electrical and electronic products
EN ISO 14937:2009 Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009)
DIN EN ISO 17665-1:2006-11 Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006)
ISO/IEC TS 17021-2:2012 Conformity assessment Requirements for bodies providing audit and certification of management systems Part 2: Competence requirements for auditing and certification of environmental management systems
BS EN ISO 14042:2000 Environmental management. Life cycle management. Life cycle impact assessment
I.S. EN ISO 14937:2009 STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
I.S. EN ISO 14031:2013 ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL PERFORMANCE EVALUATION - GUIDELINES (ISO 14031:2013)
IES HB 10 : 2011 THE LIGHTING HANDBOOK
VDI 6310 Blatt 1:2016-01 Classification and quality criteria of biorefineries
VDI 4800 Blatt 1:2016-02 Resource efficiency - Methodological principles and strategies
VDI 4600 Blatt 1:2015-08 Cumulative energy demand - Examples
VDI 4703:2015-05 Facility Management - Life-cycle-cost-based tender
VDI 3925 Blatt 1:2016-09 Methods for evaluation of waste treatment processes
PD IEC/TS 62872:2015 Industrial-process measurement, control and automation system interface between industrial facilities and the smart grid
ISO 15686-5:2017 Buildings and constructed assets — Service life planning — Part 5: Life-cycle costing
DIN EN 16751:2016-06 BIO-BASED PRODUCTS - SUSTAINABILITY CRITERIA
04/30048118 DC : DRAFT MAY 2004 BS EN ISO 11135 - STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
16/30337806 DC : 0 BS EN 16991 - RISK BASED INSPECTION FRAMEWORK (RBIF)
DIN EN ISO 15621 E : 2017 ABSORBENT INCONTINENCE AIDS FOR URINE AND/OR FAECES - GENERAL GUIDELINES ON EVALUATION (ISO 15621:2017)
17/30352715 DC : 0 BS IEC 60086-6 ED 1.0 - PRIMARY BATTERIES - PART 6: GUIDANCE ON ENVIRONMENTAL ASPECTS
BS EN 62271-4:2013 High-voltage switchgear and controlgear Handling procedures for sulphur hexafluoride (SF<sub>6</sub>) and its mixtures
BS EN ISO 9004:2018 Quality management. Quality of an organization. Guidance to achieve sustained success
PD ISO/TR 14047:2012 Environmental management. Life cycle assessment. Illustrative examples on how to apply ISO 14044 to impact assessment situations
UNI EN ISO 14064-2 : 2012 GREENHOUSE GASES - PART 2: SPECIFICATION WITH GUIDANCE AT THE PROJECT LEVEL FOR QUANTIFICATION, MONITORING AND REPORTING OF GREENHOUSE GAS EMISSION REDUCTIONS OR REMOVAL ENHANCEMENTS
BS ISO 15686-5:2017 Buildings and constructed assets. Service life planning Life-cycle costing
CSA ISO 14041 : 98(R2003) ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - GOAL AND SCOPE DEFINITION AND INVENTORY ANALYSIS
13/30263147 DC : 0 BS ISO 13315-2 - ENVIRONMENTAL MANAGEMENT FOR CONCRETE AND CONCRETE STRUCTURES - PART 2: SYSTEM BOUNDARY AND INVENTORY DATA
BS ISO 20400:2017 Sustainable procurement. Guidance
I.S. EN ISO 14043:2000 ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - LIFE CYCLE INTERPRETATION
I.S. EN ISO 17665-1:2006 STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
PD CEN ISO/TS 14071:2016 Environmental management. Life cycle assessment. Critical review processes and reviewer competencies: Additional requirements and guidelines to ISO 14044:2006
IEC GUIDE 114:2005 Environmentally conscious design - Integrating environmental aspects into design and development of electrotechnical products
17/30333280 DC : 0 BS ISO 17422 - PLASTICS - ENVIRONMENTAL ASPECTS - GENERAL GUIDELINES FOR THEIR INCLUSION IN STANDARDS
DIN EN 16757:2016-07 (Draft) SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR CONCRETE AND CONCRETE ELEMENTS
BS ISO 15686-6:2004 Buildings and constructed assets. Service life planning Procedures for considering environmental impacts
PD ISO/TR 24699:2009 Rubber and rubber products. Environmental aspects. General guidelines for their inclusion in standards
11/30249097 DC : 0 BS EN 60947-1:2007+A2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
17/30333668 DC : 0 BS ISO 20915 - LIFE CYCLE INVENTORY CALCULATION METHODOLOGY FOR STEEL PRODUCTS
05/30133642 DC : DRAFT MAY 2005
UNE-EN 16214-1:2013 Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 1: Terminology
BS EN 16760:2015 Bio-based products. Life Cycle Assessment
11/30242519 DC : DRAFT JAN 2011 BS ISO/IEC 29142-3 - CARTRIDGE CHARACTERIZATION STANDARD - PART 3: ENVIRONMENT
17/30328972 DC : 0 BS ISO 13315-8 - ENVIRONMENTAL MANAGEMENT FOR CONCRETE AND CONCRETE STRUCTURES - PART 8: ENVIRONMENTAL LABELS AND DECLARATIONS
11/30246444 DC : 0 BS EN 62075 ED 2.0 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN
BS EN 15942:2011 Sustainability of construction works. Environmental product declarations. Communication format business-to-business
BS EN 16310:2013 Engineering services. Terminology to describe engineering services for buildings, infrastructure and industrial facilities
14/30263822 DC : 0 BS ISO 15686-5 - BUILDINGS AND CONSTRUCTED ASSETS - SERVICE-LIFE PLANNING - PART 5: LIFE-CYCLE COSTING
BS ISO 16745:2015 Environmental performance of buildings. Carbon metric of a building. Use stage
BS EN 16575:2014 Bio-based products. Vocabulary
UNE-EN ISO 14046:2016 Environmental management - Water footprint - Principles, requirements and guidelines (ISO 14046:2014)
08/30192173 DC : 0 BS EN 62542 ED1 - ENVIRONMENTAL STANDARDIZATION FOR ELECTRICAL AND ELECTRONIC PRODUCTS AND SYSTEMS - STANDARDIZATION OF ENVIRONMENTAL ASPECTS - GLOSSARY OF TERMS
BS ISO 13065:2015 Sustainability criteria for bioenergy
13/30278421 DC : 0 BS ISO 15686-4 - BUILDING CONSTRUCTION - SERVICE LIFE PLANNING - PART 4: SERVICE LIFE PLANNING USING BUILDING INFORMATION MODELLING
BS ISO/IEC 29142-1:2013 Information technology. Print cartridge characterization General: terms, symbols, notations and cartridge characterization framework
BS EN 16887:2017 Leather. Environmental footprint. Product Category Rules (PCR). Carbon footprints
12/30244912 DC : 0 BS ISO 14067 - CARBON FOOTPRINT OF PRODUCTS - REQUIREMENTS AND GUIDELINES FOR QUANTIFICATION AND COMMUNICATION
DIN ISO 13065:2017-06 SUSTAINABILITY CRITERIA FOR BIOENERGY (ISO 13065:2015)
14/30263100 DC : 0 BS EN ISO 17989-1 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SUSTAINABILITY - PART 1: PRINCIPLES
ISO 13602-1:2002 Technical energy systems Methods for analysis Part 1: General
ISO 14066:2011 Greenhouse gases — Competence requirements for greenhouse gas validation teams and verification teams
16/30276460 DC : 0 BS ISO 8887-1 - TECHNICAL PRODUCT DOCUMENTATION - DESIGN FOR MANUFACTURING, ASSEMBLING, DISASSEMBLING AND END-OF-LIFE PROCESSING - PART 1: GENERAL CONCEPTS AND REQUIREMENTS
BS ISO 20140-5:2017 Automation systems and integration. Evaluating energy efficiency and other factors of manufacturing systems that influence the environment Environmental performance evaluation data
BS PD ISO/TS 14067 : 2013 GREENHOUSE GASES - CARBON FOOTPRINT OF PRODUCTS - REQUIREMENTS AND GUIDELINES FOR QUANTIFICATION AND COMMUNICATION
BS EN ISO 14025:2010 Environmental labels and declarations. Type III environmental declarations. Principles and procedures
S.R. CLC/TR 62125:2008 ENVIRONMENTAL STATEMENT SPECIFIC TO TC 20 - ELECTRIC CABLES
DIN EN 16810 E : 2017 RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES
10/30216208 DC : 0 BS 8905 - FRAMEWORK FOR THE ASSESSMENT OF THE SUSTAINABLE USE OF MATERIALS - GUIDANCE
BS ISO/IEC 29142-3:2013 Information technology. Print cartridge characterization Environment
BS EN 60601-1-9 : 2008 MEDICAL ELECTRICAL EQUIPMENT - PART 1-9: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR ENVIRONMENTALLY CONSCIOUS DESIGN
PD CEN ISO/TS 14067:2014 Greenhouse gases. Carbon footprint of products. Requirements and guidelines for quantification and communication
11/30199098 DC : 0 BS EN ISO 14045 - ENVIRONMENTAL MANAGEMENT - ECO-EFFICIENCY ASSESSMENT OF PRODUCT SYSTEMS - PRINCIPLES, REQUIREMENTS AND GUIDELINES
I.S. EN 15804:2012 SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - CORE RULES FOR THE PRODUCT CATEGORY OF CONSTRUCTION PRODUCTS
BS EN ISO 15621:2017 Absorbent incontinence aids for urine and/or faeces. General guidelines on evaluation
13/30250081 DC : 0 BS ISO 14046 - LIFE CYCLE ASSESSMENT - WATER FOOTPRINT - REQUIREMENTS AND GUIDELINES
PD ISO/TR 15686-11:2014 Buildings and constructed assets. Service life planning Terminology
BS EN ISO 11135:2014 Sterilization of health-care products. Ethylene oxide. Requirements for the development, validation and routine control of a sterilization process for medical devices
BS ISO 21930:2007 Sustainability in building construction. Environmental declaration of building products
CSA ISO 14042 : 0 ENVIRONMENTAL MANAGEMENT-LIFE CYCLE ASSESSMENT-LIFE CYCLE IMPACT ASSESSMENT
UNI ISO/TS 14067 : 2013 GREENHOUSE GASES - CARBON FOOTPRINT OF PRODUCTS - REQUIREMENTS AND GUIDELINES FOR QUANTIFICATION AND COMMUNICATION
CSA Z783 : 2012 DECONSTRUCTION OF BUILDINGS AND THEIR RELATED PARTS
I.S. EN 16810:2017 RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES
CSA ISO TS 14048 :2003 ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - DATA DOCUMENTATION FORMAT
ISO 13065:2015 Sustainability criteria for bioenergy
BS EN 60601-1-10 : 2008 MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS
CSA Z11135-1 : 2009 : R2014 STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
UNE-ISO 20400:2017 Sustainable procurement. Guidance
CSA ISO TR 14025 : 2001 ENVIRONMENTAL LABELS AND DECLARATIONS - TYPE 3 ENVIRONMENTAL DECLARATIONS
DIN EN 16001 E : 2009 ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE
CSA ISO TR 14032 : 0 ENVIRONMENTAL MANAGEMENT - EXAMPLES OF ENVIRONMENTAL PERFORMANCE EVALUATION (EPE)
CSA ISO 14044 : 2006 : R2016 ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - REQUIREMENTS AND GUIDELINES
DIN EN 15804 E : 2014 SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - CORE RULES FOR THE PRODUCT CATEGORY OF CONSTRUCTION PRODUCTS
ISO 13315-1:2012 Environmental management for concrete and concrete structures — Part 1: General principles
CSA PLUS 14021 : 2008 ENVIRONMENTAL CLAIMS: A GUIDE FOR INDUSTRY AND ADVERTISERS
UNI EN 16311 : 2013 ENGINEERING SERVICES - TERMINOLOGY TO DESCRIBE ENGINEERING SERVICES FOR INDUSTRIAL PRODUCTS
CSA ISO 16559 : 2015 SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS
DIN EN 16214-1:2012-11 SUSTAINABILITY CRITERIA FOR THE PRODUCTION OF BIOFUELS AND BIOLIQUIDS FOR ENERGY APPLICATIONS - PRINCIPLES, CRITERIA, INDICATORS AND VERIFIERS - PART 1: TERMINOLOGY
I.S. EN 16214-4:2013 SUSTAINABILITY CRITERIA FOR THE PRODUCTION OF BIOFUELS AND BIOLIQUIDS FOR ENERGY APPLICATIONS - PRINCIPLES, CRITERIA, INDICATORS AND VERIFIERS - PART 4: CALCULATION METHODS OF THE GREENHOUSE GAS EMISSION BALANCE USING A LIFE CYCLE ANALYSIS APPROACH
IEC TS 62844:2016 Guidelines for quality and risk assessment for nano-enabled electrotechnical products
CLC/TR 50600-99-1:2017 Information technology - Data centre facilities and infrastructures - Part 99-1: Recommended practices for energy management
ISO 16311-3:2014 Maintenance and repair of concrete structures — Part 3: Design of repairs and prevention
I.S. EN ISO 14064-2:2012 GREENHOUSE GASES - PART 2: SPECIFICATION WITH GUIDANCE AT THE PROJECT LEVEL FOR QUANTIFICATION, MONITORING AND REPORTING OF GREENHOUSE GAS EMISSION REDUCTIONS OR REMOVAL ENHANCEMENTS (ISO 14064-2:2006)
ISO 6707-3:2017 Buildings and civil engineering works — Vocabulary — Part 3: Sustainability terms
S.R. CEN/TR 15941:2010 SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - METHODOLOGY FOR SELECTION AND USE OF GENERIC DATA
I.S. EN ISO 15621:2017 ABSORBENT INCONTINENCE AIDS FOR URINE AND/OR FAECES - GENERAL GUIDELINES ON EVALUATION (ISO 15621:2017)
S.R. CEN/TS 16822:2015 TEXTILES AND TEXTILE PRODUCTS - SELF-DECLARED ENVIRONMENTAL CLAIMS - USE OF THE TERMS
R7005-17 Sustainability standard for household clothes drying appliances (Binational standard with AHAM 7005-2017 and UL 7005)
AAMI ISO 14937:2009 STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
ANSI/AAMI ISO 17665-1:2006(R2013) STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
UNI EN 16575 : 2014 BIO-BASED PRODUCTS - VOCABULARY
I.S. EN 16991:2018 RISK-BASED INSPECTION FRAMEWORK
I.S. EN ISO 17989-1:2015 TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SUSTAINABILITY - PART 1: PRINCIPLES (ISO 17989-1:2015)
CSA Z17665-1 : 2009 : R2014 STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
EN 60601-1-10:2008/A1:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS (IEC 60601-1-10:2007)
ONORM EN ISO 14044 : 2006 ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - REQUIREMENTS AND GUIDELINES
CSA SPE 7001 : 2012 SUSTAINABILITY STANDARD FOR HOUSEHOLD REFRIGERATION APPLIANCES
AAMI ISO 11135-1 : 2007 STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
ISO 20140-5:2017 Automation systems and integration Evaluating energy efficiency and other factors of manufacturing systems that influence the environment Part 5: Environmental performance evaluation data
I.S. EN 16757:2017 SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR CONCRETE AND CONCRETE ELEMENTS
ISO 14052:2017 Environmental management Material flow cost accounting Guidance for practical implementation in a supply chain
EN ISO 14021:2016 Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:2016)
UNE-EN 378-1:2017 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria
18/30361790 DC : 0 BS EN 17228 - PLASTICS - BIO-BASED POLYMERS, PLASTICS, AND PLASTIC PRODUCTS - TERMINOLOGY, CHARACTERISTICS AND COMMUNICATION
ISO 14021:2016 Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling)
ISO/TR 24699:2009 Rubber and rubber products Environmental aspects General guidelines for their inclusion in standards
UNE-ISO/IEC TS 17021-4:2015 Conformity assessment -- Requirements for bodies providing audit and certification of management systems -- Part 4: Competence requirements for auditing and certification of event sustainability management systems
ASTM E 1971 : 2005 Standard Guide for Stewardship for the Cleaning of Commercial and Institutional Buildings
ISO/TR 27915:2017 Carbon dioxide capture, transportation and geological storage Quantification and verification
EN 62569-1:2017 Generic specification of information on products by properties - Part 1: Principles and method
ASTM E 3066 : 2016 Standard Practice for Assessing Relative Sustainability Involving Energy or Chemicals from Biomass
I.S. EN 62040-4:2013 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 4: ENVIRONMENTAL ASPECTS - REQUIREMENTS AND REPORTING (IEC 62040-4:2013 (EQV))
CSA SPE 7006 : 2017 SUSTAINABILITY STANDARD FOR HOUSEHOLD ROOM AIR CONDITIONING APPLIANCES
CSA ISO GUIDE 64 : 1998 GUIDE FOR THE INCLUSION OF ENVIRONMENTAL ASPECTS IN PRODUCT STANDARDS
ASTM E 2114 : 2017-03 TERMINOLOGY FOR SUSTAINABILITY RELATIVE TO THE PERFORMANCE OF BUILDINGS
IEC PAS 62545:2008 Environmental information on Electrical and Electronic Equipment (EIEEE)
ISO/TR 15686-11:2014 Buildings and constructed assets — Service life planning — Part 11: Terminology
ISO/TS 17665-3:2013 Sterilization of health care products — Moist heat — Part 3: Guidance on the designation of a medical device to a product family and processing category for steam sterilization
ISO 15686-10:2010 Buildings and constructed assets — Service life planning — Part 10: When to assess functional performance
ISO/TR 14032:1999 Environmental management Examples of environmental performance evaluation (EPE)
ISO 20140-1:2013 Automation systems and integration Evaluating energy efficiency and other factors of manufacturing systems that influence the environment Part 1: Overview and general principles
ISO/IEC Guide 76:2008 Development of service standards Recommendations for addressing consumer issues
BS EN ISO 11137-1:2015 Sterilization of health care products. Radiation Requirements for development, validation and routine control of a sterilization process for medical devices
IEC TR 62726:2014 Guidance on quantifying greenhouse gas emission reductions from the baseline for electrical and electronic products and systems
IEC TR 62139:2004 Guidelines for the addition of environmental aspects in product standards specitif to TC 23
I.S. EN 16001:2009 ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE
ISO 26000:2010 Guidance on social responsibility
UNE-EN ISO 14021:2017 Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:2016)
CSA Z8000 : 2011 : R2016 CANADIAN HEALTH CARE FACILITIES
CSA Z8000 : 2011 CANADIAN HEALTH CARE FACILITIES
CSA Z8000 : 2011 : INC : UPD 1 : 2013 CANADIAN HEALTH CARE FACILITIES
CEN/TS 16524:2013 Mechanical products - Methodology for reduction of environmental impacts in product design and development
EN ISO 14050:2010 Environmental management - Vocabulary (ISO 14050:2009)
EN 60601-1-9:2008/A1:2013 MEDICAL ELECTRICAL EQUIPMENT - PART 1-9: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR ENVIRONMENTALLY CONSCIOUS DESIGN (IEC 60601-1-9:2007/A1:2013)
EN 16311:2013 Engineering services - Terminology to describe engineering services for industrial products
EN 16810:2017 Resilient, textile and laminate floor coverings - Environmental product declarations - Product category rules
EN 16001:2009 Energy management systems - Requirements with guidance for use
EN ISO 14020:2001 Environmental labels and declarations - General principles (ISO 14020:2000)
UNI EN ISO 14937 : 2009 STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
UNE-EN 16760:2016 Bio-based products - Life Cycle Assessment
DIN EN ISO 14004:2016-08 ENVIRONMENTAL MANAGEMENT SYSTEMS - GENERAL GUIDELINES ON IMPLEMENTATION (ISO 14004:2016)
IEC TR 62271-303:2008 High-voltage switchgear and controlgear - Part 303: Use and handling of sulphur hexafluoride (SF<sub>6</sub>)
CSA C22.2 No. 60601-1-9 : 2015 MEDICAL ELECTRICAL EQUIPMENT - PART 1-9: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR ENVIRONMENTALLY CONSCIOUS DESIGN
12/30241112 DC : DRAFT JAN 2012 BS EN ISO 14031 - ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL PERFORMANCE EVALUATION - GUIDELINES
CLC/TR 62271-303 : 2009 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 303: USE AND HANDLING OF SULPHUR HEXAFLUORIDE (SF[6])
PD CLC/TR 62125:2008 Environmental statement specific to TC 20. Electric cables
16/30339217 DC : DRAFT JUNE 2016 BS EN 16757 - SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR CONCRETE AND CONCRETE ELEMENTS
12/30268842 DC PD IEC/TR 62725. Analysis of quantification methodologies for greenhouse gas emissions for electrical and electronic products and systems
BS ISO 10987:2012 Earth-moving machinery. Sustainability. Terminology, sustainability factors and reporting
DIN EN 16810:2017-08 RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES
PD CEN/TS 16766:2015 Bio-based solvents. Requirements and test methods
BS ISO 15392:2008 Sustainability in building construction. General principles
08/30135847 DC : DRAFT AUG 2008 BS ISO 9004 - MANAGING FOR THE SUSTAINED SUCCESS OF AN ORGANIZATION - A QUALITY MANAGEMENT APPROACH
AAMI ISO 11137-1 : 2006 : INC : AMD 1 : 2013 : R201000 STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
06/30147232 DC : DRAFT OCT 2006 IEC 60601-1-10 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD - REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS
PD IEC/TR 62726:2014 Guidance on quantifying greenhouse gas emission reductions from the baseline for electrical and electronic products and systems
DIN EN 15530 E : 2008 ALUMINIUM AND ALUMINIUM ALLOYS - ENVIRONMENTAL ASPECTS OF ALUMINIUM PRODUCTS - GENERAL GUIDELINES FOR THEIR INCLUSION IN STANDARDS
ASTM D 7075 : 2004 Standard Practice for Evaluating and Reporting Environmental Performance of Biobased Products (Withdrawn 2013)
UNI CEI ISO/IEC TS 17021-4 : 2014 CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 4: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF EVENT SUSTAINABILITY MANAGEMENT SYSTEMS
BS ISO 14064-2 : 2006 GREENHOUSE GASES - PART 2: SPECIFICATION WITH GUIDANCE AT THE PROJECT LEVEL FOR QUANTIFICATION, MONITORING AND REPORTING OF GREENHOUSE GAS EMISSION REDUCTIONS OR REMOVAL ENHANCEMENTS
BS EN 62569-1:2017 Generic specification of information on products by properties Principles and methods
IEC TR 62725:2013 Analysis of quantification methodologies of greenhouse gas emissions for electrical and electronic products and systems
PD CEN/TS 16937:2016 Nanotechnologies. Guidance for the responsible development of nanotechnologies
BS ISO 15621:2011 Urine-absorbing aids. General guidelines on evaluation
I.S. EN ISO 11135-1:2007 STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
I.S. EN 62569-1:2017 GENERIC SPECIFICATION OF INFORMATION ON PRODUCTS BY PROPERTIES - PART 1: PRINCIPLES AND METHOD
UNE-ISO 21930:2010 Sustainability in building construction. Environmental declaration of building products
12/30217456 DC : 0 BS ISO 20140-1 - AUTOMATION SYSTEMS AND INTEGRATION - ENVIRONMENTAL AND ENERGY EFFICIENCY EVALUATION METHOD FOR MANUFACTURING SYSTEMS - PART 1: OVERVIEW AND GENERAL PRINCIPLES
14/30312994 DC : 0 BS EN 16810 - SUSTAINABILITY OF CONSTRUCTION WORK - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS
16/30344980 DC : 0 BS ISO 20400 - SUSTAINABLE PROCUREMENT - GUIDANCE
BS EN 378-1:2016 Refrigerating systems and heat pumps. Safety and environmental requirements Basic requirements, definitions, classification and selection criteria
PD CEN/TR 15941:2010 Sustainability of construction works. Environmental product declarations. Methodology for selection and use of generic data
PD IEC/TR 62839-1:2014 Environmental declaration Wires, cables and accessory products. Specific rules
DD IEC PAS 61906 : DRAFT DEC 2005 PROCEDURE FOR THE DECLARATION OF MATERIALS IN PRODUCTS OF THE ELECTROTECHNICAL AND ELECTRONIC INDUSTRY
I.S. EN ISO 14050:2010 ENVIRONMENTAL MANAGEMENT - VOCABULARY
I.S. EN 50598-3:2015 ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - PART 3: QUANTITATIVE ECO DESIGN APPROACH THROUGH LIFE CYCLE ASSESSMENT INCLUDING PRODUCT CATEGORY RULES AND THE CONTENT OF ENVIRONMENTAL DECLARATIONS
UNE-EN 15942:2013 Sustainability of construction works - Environmental product declarations - Communication format business-to-business
UNE-ISO 26000:2012 Guidance on social responsibility
UNE-EN ISO 16559:2015 Solid biofuels - Terminology, definitions and descriptions (ISO 16559:2014)
BS EN 62040-4:2013 Uninterruptible power systems (UPS) Environmental aspects. Requirements and reporting
CEI CLC/TR 62125 : 2011 ENVIRONMENTAL STATEMENT SPECIFIC TO TC 20 - ELECTRIC CABLES
DIN EN 16887 E : 2017 LEATHER - ENVIRONMENTAL FOOTPRINT - PRODUCT CATEGORY RULES (PCR) - CARBON FOOTPRINTS
16/30312210 DC : 0 BS ISO 6707-3 - BUILDINGS AND CIVIL ENGINEERING WORKS - VOCABULARY - PART 3: SUSTAINABILITY TERMS
BS ISO 16745-1:2017 Sustainability in buildings and civil engineering works. Carbon metric of an existing building during use stage Calculation, reporting and communication
PD ISO/TR 21932:2013 Sustainability in buildings and civil engineering works. A review of terminology
13/30264086 DC : 0 BS ISO 16745 - ENVIRONMENTAL PERFORMANCE OF BUILDINGS - CARBON METRIC OF A BUILDING - USE STAGE
S.R. CLC/TR 62271-303:2009 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 303: USE AND HANDLING OF SULPHUR HEXAFLUORIDE (SF[6])
13/30241775 DC : 0 BS EN ISO 16559 - SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS
BS EN ISO 16559:2014 Solid biofuels. Terminology, definitions and descriptions
BS ISO 15686-10:2010 Buildings and constructed assets. Service life planning When to assess functional performance
17/30341961 DC : 0 BS EN ISO 14067 - GREENHOUSE GASES - CARBON FOOTPRINT OF PRODUCTS - REQUIREMENTS AND GUIDELINES FOR QUANTIFICATION
BS PD ISO/TS 14071 : 2014 ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - CRITICAL REVIEW PROCESSES AND REVIEWER COMPETENCIES: ADDITIONAL REQUIREMENTS AND GUIDELINES TO ISO 14044:2006
BS EN 16214-1:2012 Sustainability criteria for the production of biofuels and bioliquids for energy applications. Principles, criteria, indicators and verifiers Terminology
BS EN 62542:2013 Environmental standardization for electrical and electronic products and systems. Glossary of terms
BS ISO 6707-3:2017 Buildings and civil engineering works. Vocabulary Sustainability terms
07/30164065 DC : 0 BS ISO 24699 - RUBBER AND RUBBER PRODUCTS - ENVIRONMENTAL ASPECTS - GENERAL GUIDELINES FOR THEIR INCLUSION IN STANDARDS
BS PAS 138(2012) : 2012 DISPOSAL OF MANUFACTURING PROCESS WASTE CONTAINING MANUFACTURED NANO-OBJECTS - GUIDE
16/30322279 DC : 0 BS ISO 14052 - ENVIRONMENTAL MANAGEMENT - MATERIAL FLOW COST ACCOUNTING - GUIDANCE FOR PRACTICAL IMPLEMENTATION IN A SUPPLY CHAIN
PD ISO/TS 14072:2014 Environmental management. Life cycle assessment. Requirements and guidelines for organizational life cycle assessment
17/30329589 DC : 0 BS ISO 21931-2 - SUSTAINABILITY IN BUILDINGS AND CIVIL ENGINEERING WORKS - FRAMEWORK FOR METHODS OF ASSESSMENT OF THE SUSTAINABILITY PERFORMANCE OF CONSTRUCTION WORKS - PART 2: CIVIL ENGINEERING WORKS
BS EN ISO 17989-1:2015 Tractors and machinery for agriculture and forestry. Sustainability Principles
BS ISO 15686-4:2014 Building Construction. Service Life Planning Service Life Planning using Building Information Modelling
I.S. EN 62542:2013 ENVIRONMENTAL STANDARDIZATION FOR ELECTRICAL AND ELECTRONIC PRODUCTS AND SYSTEMS - GLOSSARY OF TERMS (IEC 62542:2013 (EQV))
PD ISO/TS 21929-2:2015 Sustainability in building construction. Sustainability indicators Framework for the development of indicators for civil engineering works
UNI EN 15804 : 2014 SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - CORE RULES FOR THE PRODUCT CATEGORY OF CONSTRUCTION PRODUCTS
BS EN 15530:2008 Aluminium and aluminium alloys. Environmental aspects of aluminium products. General guidelines for their inclusion in standards
BS EN 16001:2009 Energy management systems. Requirements with guidance for use
BS ISO 6707-1:2017 Buildings and civil engineering works. Vocabulary General terms
AAMI ISO 17665-1 : 2006 STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
CAN/CSA-ISO 14066:12 (R2017) Greenhouse gases - Competence requirements for greenhouse gas validation teams and verification teams (Adopted ISO 14066:2011, first edition, 2011-04-15)
CSA Z11135-1 :2009 STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
08/30143668 DC : DRAFT DEC 2008 BS EN ISO 14005 - ENVIRONMENTAL MANAGEMENT SYSTEMS - GUIDELINES FOR THE PHASED IMPLEMENTATION OF AN ENVIRONMENTAL MANAGEMENT SYSTEM, INCLUDING THE USE OF ENVIRONMENTAL PERFORMANCE EVALUATION
ES 203 475 : 1.1.1 ENVIRONMENTAL ENGINEERING (EE); STANDARDIZATION TERMS AND TRENDS IN ENERGY EFFICIENCY
ISO 14955-1:2017 Machine tools — Environmental evaluation of machine tools — Part 1: Design methodology for energy-efficient machine tools
ISO 13602-2:2006 Technical energy systems Methods for analysis Part 2: Weighting and aggregation of energywares
DD IEC/PAS 62545:2008 Environmental information on electrical and electronic equipment (EIEEE)
CSA ISO 14044 :2006 ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - REQUIREMENTS AND GUIDELINES
CSA ISO 9004 : 2009 : R2015 MANAGING FOR THE SUSTAINED SUCCESS OF AN ORGANIZATION - A QUALITY MANAGEMENT APPROACH
CSA Z11135-1 : 2009 : FR STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
17/30351893 DC : 0 BS EN 17074 - GLASS IN BUILDING - ENVIRONMENTAL PRODUCT DECLARATION - PRODUCT CATEGORY RULES FOR FLAT GLASS PRODUCTS
DIN EN 16760 E : 2016 BIO-BASED PRODUCTS - LIFE CYCLE ASSESSMENT
ISO 13315-4:2017 Environmental management for concrete and concrete structures Part 4: Environmental design of concrete structures
NSF 342 : 2014 SUSTAINABILITY ASSESSMENT FOR WALLCOVERING PRODUCTS
BS ISO 20140-1:2013 Automation systems and integration. Evaluating energy efficiency and other factors of manufacturing systems that influence the environment Overview and general principles
UNE-EN ISO 14051:2012 Environmental management. Material flow cost accounting. General framework (ISO 14051:2011)
CSA SPE 7004 : 2015 SUSTAINABILITY STANDARD FOR HOUSEHOLD COOKING APPLIANCES
I.S. EN 16311:2013 ENGINEERING SERVICES - TERMINOLOGY TO DESCRIBE ENGINEERING SERVICES FOR INDUSTRIAL PRODUCTS
ES 203 199 : 1.3.1 ENVIRONMENTAL ENGINEERING (EE); METHODOLOGY FOR ENVIRONMENTAL LIFE CYCLE ASSESSMENT (LCA) OF INFORMATION AND COMMUNICATION TECHNOLOGY (ICT) GOODS, NETWORKS AND SERVICES
ISO/TS 14048:2002 Environmental management — Life cycle assessment — Data documentation format
CSA Z17665-1:09 (R2019) Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (Adopted ISO 17665-1:2006, first edition, 2006-08-15, with Canadian deviations)
I.S. EN ISO 11135:2014 STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014)
S.R. CEN/TR 17004:2016 MECHANICAL PRODUCTS - CONDITIONS TO SET UP ENVIRONMENTAL COMMUNICATION MODELS BY RECOGNIZING SECTORIAL PARTICULARITIES
I.S. EN 15942:2011 SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - COMMUNICATION FORMAT BUSINESS-TO-BUSINESS
UNI EN 15530 : 2008 ALUMINIUM AND ALUMINIUM ALLOYS - EVIRONMENTAL ASPECTS OF ALUMINIUM PRODUCTS - GENERAL GUIDELINES FOR THEIR INCLUSION IN STANDARDS
I.S. EN 60376:2005 SPECIFICATION OF TECHNICAL GRADE SULFUR HEXAFLUORIDE (SF[6]) FOR USE IN ELECTRICAL EQUIPMENT
I.S. EN ISO 16559:2014 SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS (ISO 16559:2014)
S.R. CR 13910:2000 PACKAGING - REPORT ON CRITERIA AND METHODOLOGIES FOR LIFE CYCLE ANALYSIS OF PACKAGING
AAMI/ISO TIR17665-2:2009(R2016) STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ANSI/AAMI/ISO 17665-1
CSA SPE 7008 : 2018 SUSTAINABILITY STANDARD FOR HOUSEHOLD DEHUMIDIFIER APPLIANCES
ISO Guide 82:2014 Guidelines for addressing sustainability in standards
ISO 15392:2008 Sustainability in building construction General principles
UNI EN 16310 : 2013 ENGINEERING SERVICES - TERMINOLOGY TO DESCRIBE ENGINEERING SERVICES FOR BUILDINGS, INFRASTRUCTURE AND INDUSTRIAL FACILITIES
I.S. EN 16214-1:2012 SUSTAINABILITY CRITERIA FOR THE PRODUCTION OF BIOFUELS AND BIOLIQUIDS FOR ENERGY APPLICATIONS - PRINCIPLES, CRITERIA, INDICATORS AND VERIFIERS - PART 1: TERMINOLOGY
ISO 15686-3:2002 Buildings and constructed assets — Service life planning — Part 3: Performance audits and reviews
BS EN ISO 14064-2:2012 Greenhouse gases Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements
PD ISO/TS 19930:2017 Guidance on aspects of a risk-based approach to assuring sterility of terminally sterilized, single-use health care product that is unable to withstand processing to achieve maximally a sterility assurance level of 10-6
IWA 13:2014 Multiple resource evaluation guideline
NSF 347 : 2012 SUSTAINABILITY ASSESSMENT FOR SINGLE PLY ROOFING MEMBRANES
S.R. CEN/TS 16937:2016 NANOTECHNOLOGIES - GUIDANCE FOR THE RESPONSIBLE DEVELOPMENT OF NANOTECHNOLOGIES
BS EN ISO 14044 : 2006 ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - REQUIREMENTS AND GUIDELINES
NSF 332 : 2015 SUSTAINABILITY ASSESSMENT FOR RESILIENT FLOOR COVERINGS
S.R. CWA 16960:2015 BATCH-BASED CALCULATION OF SUSTAINABILITY IMPACT FOR CAPTURED FISH PRODUCTS
ISO/TS 14027:2017 Environmental labels and declarations — Development of product category rules
I.S. EN 62474:2012 MATERIAL DECLARATION FOR PRODUCTS OF AND FOR THE ELECTROTECHNICAL INDUSTRY (IEC 62474:2012 (EQV))
EN ISO 14064-2:2012 Greenhouse gases - Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements (ISO 14064-2:2006)
ASTM E 1991 : 2005 Standard Guide for Environmental Life Cycle Assessment (LCA) of Building Materials/Products (Withdrawn 2014)
BS ISO 26000:2010 Guidance on social responsibility
CEI EN 62430 : 2011 ENVIRONMENTALLY CONSCIOUS DESIGN FOR ELECTRICAL AND ELECTRONIC PRODUCTS
UNE-ISO/IEC 17021-2:2018 Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 2: Competence requirements for auditing and certification of environmental management systems
DIN EN ISO 14044:2006-10 ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - REQUIREMENTS AND GUIDELINES (ISO 14044:2006)
UNI EN ISO 14031 : 2013 ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL PERFORMANCE EVALUATION - GUIDELINES
EN ISO 9004:2018 Quality management - Quality of an organization - Guidance to achieve sustained success (ISO 9004:2018)
ISO/IEC TS 17021-4:2013 Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 4: Competence requirements for auditing and certification of event sustainability management systems
ISO 13315-2:2014 Environmental management for concrete and concrete structures Part 2: System boundary and inventory data
ISO 17422:2002 Plastics Environmental aspects General guidelines for their inclusion in standards
ISO/TS 21931-1:2006 Sustainability in building construction Framework for methods of assessment for environmental performance of construction works Part 1: Buildings
EN ISO 14044:2006/A1:2018 ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - REQUIREMENTS AND GUIDELINES (ISO 14044:2006/AMD 1:2017)
ISO 18602:2013 Packaging and the environment — Optimization of the packaging system
EN 16766:2017 Bio-based solvents - Requirements and test methods
I.S. EN ISO 14004:2016 ENVIRONMENTAL MANAGEMENT SYSTEMS - GENERAL GUIDELINES ON IMPLEMENTATION (ISO 14004:2016)
IEC TR 62839-1:2014 Environmental declaration - Part 1: Wires, cables and accessory products - Specific rules
ISO 27917:2017 Carbon dioxide capture, transportation and geological storage — Vocabulary — Cross cutting terms
I.S. EN 62075:2012 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN (IEC 62075:2012 (EQV))
IEC 60376:2005 Specification of technical grade sulfur hexafluoride (SF<sub>6</sub>) for use in electrical equipment
I.S. EN 60601-1-9:2008 MEDICAL ELECTRICAL EQUIPMENT - PART 1-9: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR ENVIRONMENTALLY CONSCIOUS DESIGN (IEC 60601-1-9:2007 (EQV))
IEC TR 62921:2016 Quantification methodology for greenhouse gas emissions for computers and monitors
ISO 14937:2009 Sterilization of health care products General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices
IEC 62542:2013 Environmental standardization for electrical and electronic products and systems - Glossary of terms
ISO 14043:2000 Environmental management Life cycle assessment Life cycle interpretation
ISO 14041:1998 Environmental management Life cycle assessment Goal and scope definition and inventory analysis
ISO 14045:2012 Environmental management — Eco-efficiency assessment of product systems — Principles, requirements and guidelines
BS EN ISO 17665-1:2006 Sterilization of health care products. Moist heat Requirements for the development, validation and routine control of a sterilization process for medical devices
BS EN ISO 14937:2009 Sterilization of health care products. General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices
ISO 14025:2006 Environmental labels and declarations — Type III environmental declarations — Principles and procedures
UNE-EN ISO 11137-1:2015 Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006, including Amd 1:2013)
ISO 17665-1:2006 Sterilization of health care products — Moist heat — Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices
ISO 15621:2017 Absorbent incontinence aids for urine and/or faeces — General guidelines on evaluation
IEC 62040-4:2013 Uninterruptible power systems (UPS) - Part 4: Environmental aspects - Requirements and reporting
IEC 62474:2012 Material declaration for products of and for the electrotechnical industry
IEC 62075:2012 Audio/video, information and communication technology equipment - Environmentally conscious design
ISO 14004:2016 Environmental management systems General guidelines on implementation
IEC 60601-1-9:2007+AMD1:2013 CSV Medical electrical equipment - Part 1-9: General requirements forbasic safety and essential performance - Collateral Standard: Requirements for environmentally conscious design
IEC 60601-1-10:2007+AMD1:2013 CSV Medical electrical equipment - Part 1-10: General requirements forbasic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loopcontrollers
BS EN ISO 14020:2001 Environmental labels and declarations. General principles
IEC 60480:2004 Guidelines for the checking and treatment of sulfur hexafluoride (SF<sub>6</sub>) taken from electrical equipment and specification for its re-use
UNE-EN ISO 14937:2010 Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009)
ISO 14046:2014 Environmental management Water footprint Principles, requirements and guidelines
ISO 14020:2000 Environmental labels and declarations — General principles
ISO 14042:2000 Environmental management Life cycle assessment Life cycle impact assessment
ISO/TS 14067:2013 Greenhouse gases Carbon footprint of products Requirements and guidelines for quantification and communication
ISO 14031:2013 Environmental management Environmental performance evaluation Guidelines
BS EN ISO 14021:2016 Environmental labels and declarations. Self-declared environmental claims (Type II environmental labelling)
UNE-EN ISO 14031:2015 Environmental management - Environmental performance evaluation - Guidelines (ISO 14031:2013)
UNE-EN 15804:2012 Sustainability of construction works - Environmental product declarations - Core rules for the product category of construction products
ISO 14050:2009 Environmental management Vocabulary
DIN EN ISO 14043:2000-07 ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - LIFE CYCLE INTERPRETATION
EN 16751:2016 Bio-based products - Sustainability criteria
EN 15530:2008 Aluminium and aluminium alloys - Environmental aspects of aluminium products - General guidelines for their inclusion in standards
EN 16887:2017 Leather - Environmental footprint - Product Category Rules (PCR) - Carbon footprints
EN 16310:2013 Engineering services - Terminology to describe engineering services for buildings, infrastructure and industrial facilities
EN ISO 11135-1:2007 Sterilization of health care products - Ethylene oxide - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11135-1:2007)
EN ISO 14042 : 2000 ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - LIFE CYCLE IMPACT ASSESSMENT
EN 16214-1:2012 Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 1: Terminology
EN ISO 11137-1:2015 Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006, including Amd 1:2013)
EN ISO 17989-1:2015 Tractors and machinery for agriculture and forestry - Sustainability - Part 1: Principles (ISO 17989-1:2015)
EN ISO 14046:2016 Environmental management - Water footprint - Principles, requirements and guidelines (ISO 14046:2014)
EN ISO 14043 : 2000 ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - LIFE CYCLE INTERPRETATION
EN 16485:2014 Round and sawn timber - Environmental Product Declarations - Product category rules for wood and wood-based products for use in construction
EN ISO 14045:2012 Environmental management - Eco-efficiency assessment of product systems - Principles, requirements and guidelines (ISO 14045:2012)
EN 16757:2017 Sustainability of construction works - Environmental product declarations - Product Category Rules for concrete and concrete elements
EN 16760 : 2015 BIO-BASED PRODUCTS - LIFE CYCLE ASSESSMENT
EN ISO 14051:2011 Environmental management - Material flow cost accounting - General framework (ISO 14051:2011)
EN 16575:2014 Bio-based products - Vocabulary
EN ISO 14004:2016 Environmental management systems - General guidelines on implementation (ISO 14004:2016)
ASHRAE/ASHE 189.3 : 2017 DESIGN, CONSTRUCTION, AND OPERATION OF SUSTAINABLE HIGH-PERFORMANCE HEALTH CARE FACILITIES
EN ISO 15621:2017 Absorbent incontinence aids for urine and/or faeces - General guidelines on evaluation (ISO 15621:2017)
EN ISO 17665-1:2006 Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006)
EN ISO 14041 : 1998 ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - GOAL AND SCOPE DEFINITION AND INVENTORY ANALYSIS
EN ISO 14025:2010 Environmental labels and declarations - Type III environmental declarations - Principles and procedures (ISO 14025:2006)
BS EN 16757:2017 Sustainability of construction works. Environmental product declarations. Product Category Rules for concrete and concrete elements
EN ISO 14031:2013 Environmental management - Environmental performance evaluation - Guidelines (ISO 14031:2013)
UNE-EN 62075:2013 Audio/video, information and communication technology equipment - Environmentally conscious design
DD ISO/TS 14048:2002 Environmental management. Life cycle assessment. Data documentation format
DIN CEN ISO/TS 14071;DIN SPEC 35803:2016-06 ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - CRITICAL REVIEW PROCESSES AND REVIEWER COMPETENCIES: ADDITIONAL REQUIREMENTS AND GUIDELINES TO ISO 14044:2006 (ISO/TS 14071:2014)
DIN EN ISO 17989-1:2016-09 TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SUSTAINABILITY - PART 1: PRINCIPLES (ISO 17989-1:2015)
PD ISO/TS 14033:2012 Environmental management. Quantitative environmental information. Guidelines and examples
CAN/CSA-ISO 14004:16 Environmental management systems — General guidelines on implementation
05/30084682 DC : DRAFT MAR 2005 BS ISO 21930 - SUSTAINABILITY IN BUILDING CONSTRUCTION - ENVIRONMENTAL DECLARATION OF BUILDING PRODUCTS
BS ISO 14046 : 2014 ENVIRONMENTAL MANAGEMENT - WATER FOOTPRINT - PRINCIPLES, REQUIREMENTS AND GUIDELINES
ANSI/MSE 2000 : 2008 A MANAGEMENT SYSTEM FOR ENERGY
DIN EN 16760:2016-02 BIO-BASED PRODUCTS - LIFE CYCLE ASSESSMENT
BS EN 16485:2014 Round and sawn timber. Environmental Product Declarations. Product category rules for wood and wood-based products for use in construction
17/30335786 DC : 0 BS ISO 19867-1 - CLEAN COOKSTOVES AND CLEAN COOKING SOLUTIONS - HARMONIZED LABORATORY TEST PROTOCOLS - PART 1: STANDARD TEST SEQUENCE FOR EMISSIONS AND PERFORMANCE, SAFETY AND DURABILITY
UNE-EN ISO 14064-2:2012 Greenhouse gases - Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements (ISO 14064-2:2006)
NSF 416 : 2015 SUSTAINABILITY ASSESSMENT FOR WATER TREATMENT CHEMICAL PRODUCTS
01/207232 DC : DRAFT OCT 2001
BS ISO 14025 : 2006 ENVIRONMENTAL LABELS AND DECLARATIONS - TYPE 3 ENVIRONMENTAL DECLARATIONS - PRINCIPLES AND PROCEDURES
NSF 457 : 2017 SUSTAINABILITY LEADERSHIP STANDARD FOR PHOTOVOLTAIC MODULES
BS PD ISO/IEC TS 17021-2 : 2012 CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 2: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF ENVIRONMENTAL MANAGEMENT SYSTEMS
PD IEC/TR 62837:2013 Energy efficiency through automation systems
DIN EN 16575:2014-10 BIO-BASED PRODUCTS - VOCABULARY
CSA Z17665-2:09 (R2019) Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO 17665-1 (Adopted ISO/TS 17665-2:2009, first edition, 2009-01-15)
BS PD ISO/TS 14027 : 2017 ENVIRONMENTAL LABELS AND DECLARATIONS - DEVELOPMENT OF PRODUCT CATEGORY RULES
AHAM 7001 : 2015 SUSTAINABILITY STANDARD FOR HOUSEHOLD REFRIGERATION APPLIANCES
PD CEN/TS 17035:2017 Surface Active Agents. Bio-based surfactants. Requirements and test methods
11/30239628 DC : 0 BS ISO 18602 - PACKAGING AND THE ENVIRONMENT - OPTIMIZATION OF THE PACKAGING SYSTEM
ISO/TS 12720:2014 Sustainability in buildings and civil engineering works Guidelines on the application of the general principles in ISO 15392
07/30156704 DC : DRAFT DEC 2007 BS ISO GUIDE 64 - GUIDE FOR ADDRESSING ENVIRONMENTAL ISSUES IN PRODUCT STANDARDS
I.S. EN ISO 11137-1:2015 STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11137-1:2006, INCLUDING AMD 1:2013)
BS EN 60376:2005 Specification of technical grade sulfur hexafluoride (SF6) for use in electrical equipment
11/30215718 DC : 0 BS ISO 10987 - EARTH-MOVING MACHINERY - SUSTAINABILITY - TERMINOLOGY, SUSTAINABILITY FACTORS AND REPORTING
16/30348679 DC : 0 BS ISO 6707-1 - BUILDINGS AND CIVIL ENGINEERING WORKS - VOCABULARY - PART 1: GENERAL TERMS
DIN EN 15530:2008-06 Aluminium and aluminium alloys - Environmental aspects of aluminium products - General guidelines for their inclusion in standards
UNE-CEN/CLC ISO/IEC/TS 17021-2:2016 Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 2: Competence requirements for auditing and certification of environmental management systems (ISO/IEC/TS 17021-2:2012)
15/30322473 DC : DRAFT MAY 2015 BS EN 62569-1 - GENERIC SPECIFICATION OF INFORMATION ON PRODUCTS - PART 1: PRINCIPLES AND METHODS
DD CEN ISO/TS 17665-2:2009 Sterilization of health care products. Moist heat Guidance on the application of ISO 17665-1
S.R. CWA 17089:2016 INDICATORS FOR THE SUSTAINABILITY ASSESSMENT OF ROADS
BS EN 60480:2004 Guidelines for the checking and treatment of sulphur hexafluoride (SF<sub>6</sub>) taken from electrical equipment and specification for its re-use
I.S. ISO 26000:2010 GUIDANCE ON SOCIAL RESPONSIBILITY
UNI EN 15942 : 2011 SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - COMMUNICATION FORMAT BUSINESS-TO-BUSINESS
DIN EN 15942 E : 2012 SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - COMMUNICATION FORMAT BUSINESS-TO-BUSINESS
04/30048301 DC : DRAFT MAY 2004 BS EN ISO 11137-1 - STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
S.R. CEN ISO/TS 17665-2:2009 STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ISO 17665-1
PD ISO/TR 14049:2012 Environmental management. Life cycle assessment. Illustrative examples on how to apply ISO 14044 to goal and scope definition and inventory analysis
10/30084678 DC : DRAFT JUNE 2010 BS ISO 21929-1 - SUSTAINABILITY IN BUILDING CONSTRUCTION - SUSTAINABILITY INDICATORS - PART 1: FRAMEWORK FOR THE DEVELOPMENT OF INDICATORS AND A CORE SET OF INDICATORS FOR BUILDINGS
CSA ISO 14066 : 2012 GREENHOUSE GASES - COMPETENCE REQUIREMENTS FOR GREENHOUSE GAS VALIDATION TEAMS AND VERIFICATION TEAMS
03/113996 DC : DRAFT OCT 2003 IEC 60376 ED.2 - SPECIFICATION OF TECHNICAL GRADE SF6 FOR USE IN ELECTRICAL EQUIPMENT
BS EN ISO 14004:2016 ENISO 14004 Environmental management systems - General guidelines on principles, systems and support techniques
BS ISO 21931-1:2010 Sustainability in building construction. Framework for methods of assessment of the environmental performance of construction works Buildings
UNI EN ISO 16559 : 2014 SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS
DIN EN ISO 16559:2014-12 Solid biofuels - Terminology, definitions and descriptions (ISO 16559:2014)
BS ISO 14050:2002 Environmental management. Vocabulary
R7004-17 Sustainability standard for household cooking appliances (Binational standard with AHAM 7004-2017 and UL 7004)
CSA Z11135 : 2015 STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
ASTM E 2986 : 2015 Standard Guide for Evaluation of Environmental Aspects of Sustainability of Manufacturing Processes
BS ISO 14004 : 2004 ENVIRONMENTAL MANAGEMENT SYSTEMS - GENERAL GUIDELINES ON PRINCIPLES, SYSTEMS AND SUPPORTING TECHNIQUES
CEN/TR 17004:2016 Mechanical products - Conditions to set up environmental communication models by recognizing sectorial particularities
CSA ISO 14064-2 : 2006 : R2011 GREENHOUSE GASES - PART 2: SPECIFICATION WITH GUIDANCE AT THE PROJECT LEVEL FOR QUANTIFICATION, MONITORING AND REPORTING OF GREENHOUSE GAS EMISSION REDUCTIONS OR REMOVAL ENHANCEMENTS
AHAM 7004 : 2017 SUSTAINABILITY STANDARD FOR HOUSEHOLD COOKING APPLIANCES
S.R. CEN ISO/TS 14067:2014 GREENHOUSE GASES - CARBON FOOTPRINT OF PRODUCTS - REQUIREMENTS AND GUIDELINES FOR QUANTIFICATION AND COMMUNICATION (ISO/TS 14067:2013)
CSA ISO 14937 : 2011 : R2016 STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
CSA ISO 9004 : 2009 MANAGING FOR THE SUSTAINED SUCCESS OF AN ORGANIZATION - A QUALITY MANAGEMENT APPROACH
EN ISO 11135:2014 Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 11135:2014)
BS ISO 8887-1:2017 Technical product documentation. Design for manufacturing, assembling, disassembling and end-of-life processing General concepts and requirements
IEC 62569-1:2017 Generic specification of information on products by properties - Part 1: Principles and methods
CAN/CSA-ISO 14025-07 (R2017) Environmental Labels and Declarations - Type III Environmental Declarations - Principles and Procedures (Adopted ISO 14025:2006, first edition, 2006-07-01)
CEI EN 62075 : 2013 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN
CSA ISO 14064-2 : 2006 : R2016 GREENHOUSE GASES - PART 2: SPECIFICATION WITH GUIDANCE AT THE PROJECT LEVEL FOR QUANTIFICATION, MONITORING AND REPORTING OF GREENHOUSE GAS EMISSION REDUCTIONS OR REMOVAL ENHANCEMENTS
Z783-12 (R2016) Deconstruction of buildings and their related parts
UNE-CEN/TR 13910:2011 IN Packaging - Report on criteria and methodologies for life cycle analysis of packaging
DIN EN 16310:2013-05 ENGINEERING SERVICES - TERMINOLOGY TO DESCRIBE ENGINEERING SERVICES FOR BUILDINGS, INFRASTRUCTURE AND INDUSTRIAL FACILITIES
IEC 62430:2009 Environmentally conscious design for electrical and electronic products
UNI EN 16485 : 2014 ROUND AND SAWN TIMBER - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR WOOD AND WOOD-BASED PRODUCTS FOR USE IN CONSTRUCTION
S.R. CEN TR 15822:2009 PLASTICS - BIODEGRADABLE PLASTICS IN OR ON SOIL - RECOVERY, DISPOSAL AND RELATED ENVIRONMENTAL ISSUES
S.R. CEN TR 13910:2010 PACKAGING - REPORT ON CRITERIA AND METHODOLOGIES FOR LIFE CYCLE ANALYSIS OF PACKAGING
CSA C22.2 No. 60601-1-10 : 2009 : INC : AMD 1 : 2014 : R201400 MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS
AAMI ISO TIR 17665-3:2014 STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - GUIDANCE ON THE DESIGNATION OF A MEDICAL PRODUCT TO A PRODUCT FAMILY AND PROCESSING CATEGORY FOR STEAM STERILIZATION
I.S. EN ISO 14045:2012 ENVIRONMENTAL MANAGEMENT - ECO-EFFICIENCY ASSESSMENT OF PRODUCT SYSTEMS - PRINCIPLES, REQUIREMENTS AND GUIDELINES (ISO 14045:2012)
S.R. CEN/TS 16766:2015 BIO-BASED SOLVENTS - REQUIREMENTS AND TEST METHODS
S.R. CLC/TR 50600-99-1:2017 INFORMATION TECHNOLOGY - DATA CENTRE FACILITIES AND INFRASTRUCTURES - PART 99-1: RECOMMENDED PRACTICES FOR ENERGY MANAGEMENT
IEEE 1680.3-2012 IEEE Standard for Environmental Assessment of Televisions
I.S. EN ISO 9004:2009 QUALITY MANAGEMENT - QUALITY OF AN ORGANIZATION - GUIDANCE TO ACHIEVE SUSTAINED SUCCESS (ISO 9004:2018)
I.S. EN 16485:2014 ROUND AND SAWN TIMBER - ENVIRONMENTAL PRODUCT DECLARATIONS - PRODUCT CATEGORY RULES FOR WOOD AND WOOD-BASED PRODUCTS FOR USE IN CONSTRUCTION
IEEE 1680.2-2012 IEEE Standard for Environmental Assessment of Imaging Equipment
IWA 9:2011 Framework for managing sustainable development in business districts
I.S. EN ISO 14044:2006 ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - REQUIREMENTS AND GUIDELINES (ISO 14044:2006)
ISO/TS 14072:2014 Environmental management — Life cycle assessment — Requirements and guidelines for organizational life cycle assessment
CR 13910 : 2000 PACKAGING - REPORT ON CRITERIA AND METHODOLOGIES FOR LIFE CYCLE ANALYSIS OF PACKAGING
I.S. EN 16310:2013 ENGINEERING SERVICES - TERMINOLOGY TO DESCRIBE ENGINEERING SERVICES FOR BUILDINGS, INFRASTRUCTURE AND INDUSTRIAL FACILITIES
S.R. CEN/TS 17159:2018 SOCIETAL AND CITIZEN SECURITY - GUIDANCE FOR THE SECURITY OF HAZARDOUS MATERIALS (CBRNE) IN HEALTHCARE FACILITIES
ISO 15686-1:2011 Buildings and constructed assets — Service life planning — Part 1: General principles and framework
AAMI TIR65 : 2015 SUSTAINABILITY OF MEDICAL DEVICES - ELEMENTS OF A RESPONSIBLE PRODUCT LIFE CYCLE
CEI EN 60480 : 2005 GUIDELINES FOR THE CHECKING AND TREATMENT OF SULPHUR HEXAFLUORIDE (SF6) TAKEN FROM ELECTRICAL EQUIPMENT AND SPECIFICATION FOR ITS RE-USE
DIN EN ISO 9004:2009-12 MANAGING FOR THE SUSTAINED SUCCESS OF AN ORGANIZATION - A QUALITY MANAGEMENT APPROACH
NSF 140 : 2015 SUSTAINABILITY ASSESSMENT FOR CARPET
S.R. CWA 17031:2016 SUSTAINABLE INTEGRATED WATER USE & TREATMENT IN PROCESS INDUSTRIES - A PRACTICAL GUIDANCE (SUSTAINWATER)
UNE-EN 62271-4:2014 High-voltage switchgear and controlgear - Part 4: Handling procedures for sulphur hexafluoride (SF6) and its mixtures
UNE-ISO 14046:2015 Environmental management -- Water footprint -- Principles, requirements and guidelines
ISO/TR 23087:2018 Automation systems and integration The Big Picture of standards
ISO 6707-1:2017 Buildings and civil engineering works Vocabulary Part 1: General terms
I.S. EN 378-1:2016 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 1: BASIC REQUIREMENTS, DEFINITIONS, CLASSIFICATION AND SELECTION CRITERIA
ISO/TR 14062:2002 Environmental management Integrating environmental aspects into product design and development
17/30361321 DC : 0 BS EN 17160 - PRODUCT CATEGORY RULES FOR CERAMIC TILES
SPE-14040-14 Life cycle assessment of auto parts - Guidelines for conducting LCA of auto parts incorporating weight changes due to material composition, manufacturing technology, or part geometry
UNE-EN ISO 11135:2015 Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 11135:2014)
BS EN 16766:2017 Bio-based solvents. Requirements and test methods
UNE-CEN ISO/TS 14027:2018 Environmental labels and declarations - Development of product category rules (ISO/TS 14027:2017)
UNI ISO 26000 : 2010 GUIDANCE ON SOCIAL RESPONSIBILITY
TS 105 174-2 : 1.2.1 ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); BROADBAND DEPLOYMENT AND ENERGY MANAGEMENT; PART 2: ICT SITES
PREN ISO 16559 : DRAFT 2013 SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS (ISO/DIS 16559:2013)
PREN 17160 : DRAFT 2017 PRODUCT CATEGORY RULES FOR CERAMIC TILES
UNI EN ISO 14025 : 2010 ENVIRONMENTAL LABELS AND DECLARATIONS - TYPE 3 ENVIRONMENTAL DECLARATIONS - PRINCIPLES AND PROCEDURES
CSA PLUS 1109 : 2003 ENVIRONMENTAL TERMINOLOGY FOR CANADIAN BUSINESS
UNI EN 16214-1 : 2012 SUSTAINABILITY CRITERIA FOR THE PRODUCTION OF BIOFUELS AND BIOLIQUIDS FOR ENERGY APPLICATIONS - PRINCIPLES, CRITERIA, INDICATORS AND VERIFIERS - PART 1: TERMINOLOGY
ISO/IEC 29142-1:2013 Information technology Print cartridge characterization Part 1: General: terms, symbols, notations and cartridge characterization framework
ISO 15686-4:2014 Building Construction — Service Life Planning — Part 4: Service Life Planning using Building Information Modelling
ISO/TR 21932:2013 Sustainability in buildings and civil engineering works A review of terminology
ISO 16759:2013 Graphic technology — Quantification and communication for calculating the carbon footprint of print media products
ISO 10987:2012 Earth-moving machinery — Sustainability — Terminology, sustainability factors and reporting
ISO 11135:2014 Sterilization of health-care products — Ethylene oxide — Requirements for the development, validation and routine control of a sterilization process for medical devices
IEC TR 62125:2007 Environmental statement specific to IEC TC 20 - Electric cables
ISO/TR 14049:2012 Environmental management Life cycle assessment Illustrative examples on how to apply ISO 14044 to goal and scope definition and inventory analysis
IEC TS 62872:2015 Industrial-process measurement, control and automation system interface between industrial facilities and the smart grid
ISO 16745:2015 Environmental performance of buildings Carbon metric of a building Use stage
IEEE 1680.1-2009 IEEE Standard for Environmental Assessment of Personal Computer Products, Including Notebook Personal Computers, Desktop Personal Computers, and Personal Computer Displays
DIN EN ISO 11137-1:2015-11 STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11137-1:2006, INCLUDING AMD 1:2013)
ISO 16559:2014 Solid biofuels Terminology, definitions and descriptions
BS EN ISO 11135-1:2007 Sterilization of health care products. Ethylene oxide Requirements for development, validation and routine control of a sterilization process for medical devices
ISO 14051:2011 Environmental management — Material flow cost accounting — General framework
ISO 14005:2010 Environmental management systems Guidelines for the phased implementation of an environmental management system, including the use of environmental performance evaluation
ISO/TS 17665-2:2009 Sterilization of health care products — Moist heat — Part 2: Guidance on the application of ISO 17665-1
EN 15942:2011 Sustainability of construction works - Environmental product declarations - Communication format business-to-business
CEN/TS 16822 : 2015 TEXTILES AND TEXTILE PRODUCTS - SELF-DECLARED ENVIRONMENTAL CLAIMS - USE OF THE TERMS
EN 62075:2012/AC:2013 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN (IEC 62075:2012)
CEN/TR 13910:2010 Packaging - Report on criteria and methodologies for life cycle analysis of packaging
EN 62271-4 : 2013 High-voltage switchgear and controlgear - Part 4: Handling procedures for sulphur hexafluoride (SF6) and its mixtures
CLC/TR 62125:2008 Environmental statement specific to TC 20 - Electric cables
EN 50598-3:2015 Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Part 3: Quantitative eco design approach through life cycle assessment including product category rules and the content of environmental declarations
DIN EN ISO 14937:2010-03 Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009)
EN 62474:2012 Material declaration for products of and for the electrotechnical industry
DIN EN 16001:2009-08 ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE
CEN/TS 16766 : 2015 BIO-BASED SOLVENTS - REQUIREMENTS AND TEST METHODS
CEN ISO/TS 17665-2:2009 Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO 17665-1 (ISO/TS 17665-2:2009)
DIN EN ISO 14020:2002-02 Environmental labels and declarations - General principles (ISO 14020:2000); English version of DIN EN ISO 14020
EN 60480:2004 Guidelines for the checking and treatment of sulphur hexafluoride (SF6) taken from electrical equipment and specification for its re-use

ISO 14063:2006 Environmental management Environmental communication Guidelines and examples
ISO/TR 14047:2012 Environmental management Life cycle assessment Illustrative examples on how to apply ISO 14044 to impact assessment situations
ISO/TR 14049:2012 Environmental management Life cycle assessment Illustrative examples on how to apply ISO 14044 to goal and scope definition and inventory analysis
AS ISO 27917:2019 Carbon dioxide capture, transportation and geological storage - Vocabulary - Cross cutting terms
ISO 14064-1:2006 Greenhouse gases Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals
ISO 14021:2016 Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling)
AS ISO 14044:2019 Environmental management - Life cycle assessment - Requirements and guidelines
ISO/TR 14032:1999 Environmental management Examples of environmental performance evaluation (EPE)
ISO 14031:2013 Environmental management Environmental performance evaluation Guidelines
ISO 14044:2006 Environmental management Life cycle assessment Requirements and guidelines
ISO/TR 14062:2002 Environmental management Integrating environmental aspects into product design and development
ISO 14004:2016 Environmental management systems General guidelines on implementation
ISO 14001:2015 Environmental management systems — Requirements with guidance for use
ISO 14020:2000 Environmental labels and declarations — General principles
ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
ISO 14025:2006 Environmental labels and declarations — Type III environmental declarations — Principles and procedures
ISO 14064-3:2006 Greenhouse gases Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions
ISO/TS 14048:2002 Environmental management — Life cycle assessment — Data documentation format
SA HB 13485:2020 AS ISO 13485:2017 - Medical devices - A practical guide
ISO Guide 64:2008 Guide for addressing environmental issues in product standards
ISO 14064-2:2006 Greenhouse gases Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements
ISO 14050:2009 Environmental management Vocabulary

View more information
£119.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.