ISO 4543:1981
|
Metallic and other non-organic coatings General rules for corrosion tests applicable for storage conditions
|
EN 10147 : 2000
|
CONTINUOUSLY HOT-DIP ZINC COATED STRUCTURAL STEELS SHEET AND STRIP - TECHNICAL DELIVERY CONDITIONS
|
ENV 10169-2 : 1999
|
CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS
|
EN 10140:2006
|
Cold rolled narrow steel strip - Tolerances on dimensions and shape
|
EN 10079:2007
|
Definition of steel products
|
EN 10169-1:2003
|
Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods)
|
EN 10027-2:2015
|
DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
|
EN 10152:2017
|
Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions
|
EN 13523-6:2002
|
Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test)
|
EN 10268:2006+A1:2013
|
COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
|
ISO 6270-1:1998
|
Paints and varnishes Determination of resistance to humidity Part 1: Continuous condensation
|
EN 13523-9:2014
|
Coil coated metals - Test methods - Part 9: Resistance to water immersion
|
EN 10142 : 2000
|
CONTINUOUSLY HOT-DIP ZINC COATED LOW CARBON STEELS SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
|
EN 10215 : 1995
|
CONTINUOUSLY HOT-DIP ALUMINIUM-ZINC (AZ) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS
|
EN 13523-0:2014
|
Coil coated metals - Test methods - Part 0: General introduction
|
EN 13523-3:2014
|
Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
|
EN 10139:2016
|
Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions
|
EN 10131:2006 (edition 2)
|
Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape
|
EN 10154 : 2002
|
CONTINUOUSLY HOT-DIP ALUMINIUM-SILICON (AS) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS
|
ENV 606 : DRAFT 1993
|
BAR CODED TRANSPORT AND HANDLING LABELS FOR STEEL PRODUCTS
|
EN ISO 8044:2015
|
Corrosion of metals and alloys - Basic terms and definitions (ISO 8044:2015)
|
ISO 12944-2:2017
|
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments
|
EN 10143:2006 (edition 2)
|
Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape
|
EN 13523-22:2017
|
Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison
|
EN 10021:2006
|
General technical delivery conditions for steel products
|
ISO 11997-1:2017
|
Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humid
|
EN ISO 4543 : 1994
|
METALLIC AND OTHER NON-ORGANIC COATINGS - GENERAL RULES FOR CORROSION TESTS APPLICABLE FOR STORAGE CONDITIONS
|
EN 13523-18:2002
|
Coil coated metals - Test methods - Part 18: Resistance to staining
|
EN 10204:2004
|
Metallic products - Types of inspection documents
|
EN 10214 : 1995
|
CONTINUOUSLY HOT-DIP ZINC-ALUMINIUM (ZA) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS
|
EN 13523-8:2017
|
Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)
|
EN 10130:2006
|
Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions
|
EN 10027-1:2016
|
Designation systems for steels - Part 1: Steel names
|
EN 13523-7:2014
|
Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
|
EN 13523-1:2017
|
Coil coated metals - Test methods - Part 1: Film thickness
|
EN 10292:2007
|
Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming - Technical delivery conditions
|
EN 10020:2000
|
Definition and classification of grades of steel
|
EN 13523-2:2014
|
Coil coated metals - Test methods - Part 2: Gloss
|
CR 10260 : 1998
|
DESIGNATION SYSTEMS FOR STEEL - ADDITIONAL SYMBOLS
|