• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 10204:2004

Current

Current

The latest, up-to-date edition.

Metallic products - Types of inspection documents

Published date

20-10-2004

Foreword
1 Scope
2 Terms and definitions
3 Inspection documents based on non-specific inspection
4 Inspection documents based on specific inspection
5 Validation and transmission of inspection documents
6 Transmission of inspection documents by an intermediary
Annex A (informative) Summary of inspection documents
Annex ZA (informative) Relationship between this European
         Standard and the Essential Requirements of
         EU Directive 97/23/EC
Bibliography

1.1This European Standard specifies the different types of inspection documents supplied to the purchaser, in accordance with the requirements of the order, for the delivery of all metallic products e.g. plates, sheets, bars, forgings, castings, whatever their method of production.1.2This standard may also apply to non-metallic products.1.3This standard is used in conjunction with the product specifications which specify the technical delivery conditions of the products.NOTE 1The list of information that may be included in the inspection documents can be found in appropriate documents, e.g. prEN 10168 for steel.NOTE 2Annex A gives a summary of the different inspection documents.

Committee
CEN/TC 459/SC 12
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

03/302675 DC : DRAFT FEB 2003 EN 14616 - THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING
11/30239491 DC : 0 BS EN 10149-1 - HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL DELIVERY CONDITIONS
UNE-EN 13195:2014 Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore)
UNE-EN 10088-5:2010 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
UNE-EN 10343:2010 Steels for quenching and tempering for construction purposes - Technical delivery conditions
PD CEN/TR 1317-6:2012 Road restraint systems Pedestrian restraint system. Pedestrian parapets
PREN 1451-1 : DRAFT 2016 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
05/30114324 DC : DRAFT FEB 2005 EN ISO 14555 - WELDING - ARC STUD WELDING OF METALLIC MATERIALS
11/30254515 DC : 0 BS EN 4560 - AEROSPACE SERIES - PIPE COUPLING 37 DEGREES, SPHERICAL, UP TO 21000 KPA - INCH SERIES - TECHNICAL SPECIFICATION
I.S. EN 10208-2:2009 STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
07/30169136 DC : 0 BS ISO 28763 - VITREOUS AND PORCELAIN ENAMELS - REGENERATIVE, ENAMELLED AND PACKED PANELS FOR AIR-GAS AND GAS-GAS HEAT EXCHANGERS - SPECIFICATIONS
I.S. EN 10329:2006 STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS
08/30189622 DC : 0 BS EN 10223-8 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 8: WELDED MESH GABION PRODUCTS
09/30208363 DC : 0 BS EN 4816 - AEROSPACE SERIES - FLANGE COUPLINGS - GASKET SEAL WITH NICKEL ALLOY C SEAL, TECHNICAL SPECIFICATION, INCH SERIES
07/30159562 DC : 0 BS EN ISO 13628-1 AMD1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
08/30180856 DC : DRAFT JUNE 2008 BS EN 10270-3 - STEEL WIRE FOR MECHANICAL SPRINGS - PART 3: STAINLESS SPRING STEEL WIRE
DIN EN 10152:2009-07 ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
08/30184309 DC : DRAFT SEP 2008 BS EN 12952-5 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER
DIN EN 15689 E : 2010 RAILWAY APPLICATIONS - TRACK - SWITCHES AND CROSSINGS - CROSSING COMPONENTS MADE OF CAST AUSTENITIC MANGANESE STEEL
DIN EN 10338:2015-10 Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions
BS EN 4816:2017 Aerospace series. Flange couplings. Gasket seal with nickel alloy C seal. Technical specification. Inch series
PREN 10217-6 : DRAFT 2009 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
I.S. EN 10169-2:2006 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 2: PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS
17/30339710 DC : 0 BS ISO 21138-3 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: PIPES AND FITTINGS WITH NON-SMOOTH EXTERNAL SURFACE, TYPE B
03/302503 DC : DRAFT FEB 2003 BS EN 14276-2 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
96/106185 DC : DRAFT AUG 1996 PREN 1337-5 - STRUCTURAL BEARINGS - PART 5: POT BEARINGS
I.S. EN 74-1:2005 COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 1: COUPLERS FOR TUBES - REQUIREMENTS AND TEST PROCEDURES
UNE-EN 1563:2012 Founding - Spheroidal graphite cast irons
15/30287641 DC : 0 BS EN ISO 16120-1 - NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS
17/30339707 DC : 0 BS ISO 21138-2 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: PIPES AND FITTINGS WITH SMOOTH EXTERNAL SURFACE, TYPE A
I.S. EN 10016-1:1995 NON-ALLOY STEEL ROD FOR DRAWING AND/OR COLD ROLLING - PART 1: GENERAL REQUIREMENTS
09/30207517 DC : 0 BS EN 10217-6 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
BS EN 10294-2:2012 Hollow bars for machining. Technical delivery conditions Stainless steels with specified machinability properties
I.S. EN 12079-1:2006 OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 1: OFFSHORE CONTAINERS - DESIGN, MANUFACTURE AND MARKING
12/30259226 DC : 0 BS EN 10107 - GRAIN-ORIENTED ELECTRICAL STEEL STRIP AND SHEET DELIVERED IN THE FULLY PROCESSED STATE
14/30304346 DC : 0 BS EN ISO 17782 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - QUALIFICATION OF MANUFACTURERS OF SPECIAL MATERIALS
DIN EN ISO 15589-2 E : 2014 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES (ISO 15589-2:2012)
17/30346738 DC : 0 BS EN 10225-2 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 2: SECTIONS
PREN 12493 : DRAFT 2013 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
12/30254917 DC : DRAFT JAN 2012 BS EN 877 - CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
10/30216705 DC : 0 BS EN 12953-2 - SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
UNI EN 1474-1 : 2009 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
PREN 14199 : DRAFT 2013 EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES
05/30133040 DC : DRAFT APR 2005 BS EN 1866 - MOBILE FIRE EXTINGUISHERS
EN ISO 18797-1:2017 Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 1: Elastomeric coating systems-polychloroprene or EPDM (ISO 18797-1:2016)
05/30042912 DC : DRAFT JAN 2005 PREN 15045 - TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE SEAMLESS ALUMINIUM OR ALUMINIUM ALLOY GAS CYLINDERS FOR PORTABLE CO[2] FIRE EXTINGUISHERS OF WATER CAPACITIES FROM 0,5 LITRE UP TO 15 LITRES
PREN 10028-5 : DRAFT 2014 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 5: WELDABLE FINE GRAIN STEELS, THERMOMECHANICALLY ROLLED
EN 61987-16:2017 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 16: Lists of properties (LOPs) for density measuring equipment for electronic data exchange
I.S. EN 10341:2006 COLD ROLLED ELECTRICAL NON-ALLOY AND ALLOY STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE
I.S. EN 10126:1996 COLD ROLLED ELECTRICAL NON-ALLOYED STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE
PREN 1442 : DRAFT 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
BS EN 12693:2008 Refrigerating systems and heat pumps. Safety and environmental requirements. Positive displacement refrigerant compressors
08/30193157 DC : 0 BS EN ISO 13628-1:2005/AMD 2 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
I.S. EN 10292:2007 CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STEELS WITH HIGHER YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
13/30259076 DC : 0 BS EN 13445-8 - UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS
06/30136505 DC : 0 EN 754-1 - ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
DIN EN 15698-2 E : 2015 DISTRICT HEATING PIPES - PREINSULATED BONDED TWIN PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PART 2: FITTING AND VALVE ASSEMBLY OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
16/30336859 DC : 0 BS EN 1852-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
PREN 10207 : DRAFT 2015 STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS
UNI EN 15714-4 : 2009 INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
14/30312167 DC : 0 BS EN 10028-6 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 6: WELDABLE FINE GRAIN STEELS, QUENCHED AND TEMPERED
PREN 1564 : DRAFT 2009 FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRON
BS EN 10088-5:2009 Stainless steels Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
ISO 683-2:2016 Heat-treatable steels, alloy steels and free-cutting steels Part 2: Alloy steels for quenching and tempering
17/30342922 DC : 0 BS EN 61987-92 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 92: LISTS OF PROPERTIES (LOP) OF MEASURING EQUIPMENT FOR ELECTRONIC DATA EXCHANGE - ASPECT LOPS
05/30132854 DC : DRAFT APR 2005 EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
15/30317351 DC : 0 BS EN 13480-8:2012/A2 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING
DIN EN 12449:2015-11 (Draft) COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES
API 5L REDLINE : 2007 SPECIFICATION FOR LINE PIPE
PREN 14141 : DRAFT 2011 VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS
02/710618 DC : DRAFT SEP 2002 BS EN 13852-2 - CRANES - OFFSHORE CRANES - PART 2: FLOATING CRANES
PREN 14129 : DRAFT 2011 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG TANKS
09/30196508 DC : 0 BS ISO 9328-1 - STEEL FLAT PRODUCTS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL REQUIREMENTS
UNI EN 508-2 : 2008 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM
12/30268540 DC : 0 BS EN ISO 14919 - THERMAL SPRAYING - WIRES, RODS AND CORDS FOR FLAME AND ARC SPRAYING - CLASSIFICATION - TECHNICAL SUPPLY CONDITIONS
EN 13445-10:2015 Unfired pressure vessels - Part 10: Additional requirements for pressure vessels of nickel and nickel alloys
14/30311109 DC : 0 BS EN 1453-1 - PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES AND THE SYSTEM
UNE-EN 15129:2011 Anti-seismic devices
12/30259884 DC : 0 BS EN ISO 3452-2 - NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 2: TESTING OF PENETRANT MATERIALS
09/30211880 DC : 0 BS EN 12732 - GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS
16/30348296 DC : DRAFT DEC 2016 BS EN 14460 - EXPLOSION RESISTANT EQUIPMENT
12/30266853 DC : 0 BS EN 1866-2 - MOBILE FIRE EXTINGUISHERS - PART 2: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS, WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 1866-1
BS EN 1090-5:2017 Execution of steel structures and aluminium structures Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications
13/30290552 DC : 0 BS EN 4691-1 AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION
13/30285580 DC : 0 BS EN ISO 16961 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL PROTECTIVE COATING AND LINING OF ABOVE GROUND STEEL STORAGE TANKS
13/30291075 DC : 0 BS EN 15698-2 - DISTRICT HEATING PIPES - PREINSULATED BONDED TWIN PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PART 2: FITTING AND VALVE ASSEMBLY OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
05/30133802 DC : 0 EN 10028-7 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 7: STAINLESS STEELS
16/30332879 DC : 0 BS EN 1451-1 - PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
08/30190326 DC : DRAFT DEC 2008 BS EN 10225 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS
13/30247437 DC : 0 BS EN ISO 683-17 - HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO/DIS 683-17:2013)
PREN ISO 10380 : DRAFT 2011 PIPEWORK - CORRUGATED METAL HOSES AND HOSE ASSEMBLIES
DIN EN 16821 E : 2017 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - SILICONE RUBBER HOSES
03/106158 DC : DRAFT APR 2003 EN 14653-1 - MANUALLY OPERATED HYDRAULIC SHORING SYSTEMS FOR GROUNDWORK SUPPORT - PART 1: PRODUCT SPECIFICATIONS
DIN 17455:1999-02 WELDED CIRCULAR STAINLESS STEEL TUBES WITH GENERAL QUALITY REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS
EN 10085:2001 Nitriding steels - Technical delivery conditions
13/30280743 DC : 0 BS EN 14199 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES
CEI EN 50149 : 2013 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - COPPER AND COPPER ALLOY GROOVED CONTACT WIRES
15/30325000 DC : 0 BS EN 10305-5 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES
14/30301152 DC : 0 BS EN 12392 - ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT
BS EN 15566:2016 Railway applications. Railway rolling stock. Draw gear and screw coupling
15/30332015 DC : 0 BS EN 61987-16 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 16: LIST OF PROPERTIES (LOP) FOR DENSITY MEASURING EQUIPMENT FOR ELECTRONIC DATA EXCHANGE
UNI EN 13600 : 2013 COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES
11/30251682 DC : 0 BS EN 1977 - COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD)
DIN EN 16617:2015-07 PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING
03/314353 DC : 0 EN 378-4 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 4: OPERATION, MAINTENANCE, REPAIR AND RECOVERY
BS ISO 17746:2016 Steel wire rope net panels and rolls. Definitions and specifications
BS EN 16124:2011 Founding. Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications
09/30209001 DC : 0 BS EN 50149 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - COPPER AND COPPER ALLOY GROOVED CONTACT WIRES
09/30186082 DC : 0 BS EN 13110 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS - DESIGN AND CONSTRUCTION
12/30258463 DC : 0 BS EN 16451 - RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER
12/30267658 DC : 0 BS EN ISO 21809-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 2: SINGLE LAYER FUSION BONDED EPOXY COATINGS
16/30338096 DC : 0 BS EN 303-1 - HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING
DD CEN/TS 14541:2007 Plastics pipes and fittings for non-pressure applications. Utilisation of non-virgin PVC-U, PP and PE materials
DIN EN 15551 E : 2011 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
12/30262118 DC BS ISO 14313 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES
03/319412 DC : DRAFT NOV 2003 EN 12878 - PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST
09/30207508 DC : 0 BS EN 10217-3 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
09/30200840 DC : 0 BS EN 1564 - FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRON
10/30234616 DC : 0 BS EN 14420-7 - HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS
13/30280398 DC : 0 BS EN 10338 - HOT ROLLED AND COLD ROLLED NON-COATED FLAT PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
10/30201497 DC : 0 BS EN 10305-4 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
02/107768 DC : DRAFT DEC 2002 BS EN 74-1 - COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 1: COUPLERS FOR TUBES - REQUIREMENTS AND TEST PROCEDURES
DIN EN 13195:2013-12 ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE)
BS EN 1562:2012 Founding. Malleable cast irons
01/714474 DC : DRAFT NOV 2001 BS EN 14276-1 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
15/30278562 DC : 0 BS ISO 18797-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS - POLYCHLOROPRENE OR EPDM
08/30189604 DC : 0 BS EN 10223-2 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 2: HEXAGONAL STEEL WIRE NETTING FOR AGRICULTURAL, INSULATION, AND FENCING PURPOSES
PREN ISO 28763 : DRAFT 2010 VITREOUS AND PORCELAIN ENAMELS - REGENERATIVE, ENAMELLED AND PACKED PANELS FOR AIR-GAS AND GAS-GAS HEAT EXCHANGERS - SPECIFICATIONS
96/709570 DC : DRAFT JUL 1996 PREN 10285 - STEEL TUBES AND FITTINGS FOR ON AND OFFSHORE PIPELINES - EXTERNAL THREE LAYER EXTRUDED POLYETHYLENE BASED COATINGS
PD CR 12952-17:2002 Water boilers and auxiliary installations Guidelines for the involvement of an inspection body independent of the manufacturer
BS EN 10343:2009 Steels for quenching and tempering for construction purposes. Technical delivery conditions
06/30152010 DC : 0 EN 2755 - BEARING SPHERICAL JOINTS C/R STEEL, SELF-LUB LINER - EL. LOAD
DIN EN 16820 E : 2017 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING
11/30253745 DC : 0 BS EN 14025 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION
PREN 12392 : DRAFT 2014 ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT
14/30312164 DC : 0 BS EN 10028-5 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 5: WELDABLE FINE GRAIN STEELS, THERMOMECHANICALLY ROLLED
06/30143946 DC : 0 EN 485-1 - ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
BS EN 61987-12:2016 Industrial-process measurement and control. Data structures and elements in process equipment catalogues Lists of properties (LOPs) for flow measuring equipment for electronic data exchange
11/30246678 DC : 0 BS EN 13480-4 - METALLIC INDUSTRIAL PIPING - PART 4: FABRICATION AND INSTALLATION
13/30256266 DC : 0 BS ISO 683-18 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 18: BRIGHT STEEL PRODUCTS
04/30124490 DC : DRAFT OCT 2004 EN 15049 - RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - TORSION BAR, STEEL
12/30250279 DC : 0 BS EN 12252 - LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
PREN 10225-4 : DRAFT 2017 WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS
I.S. EN 1515-4:2009 FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
BS EN 1563:2011 Founding. Spheroidal graphite cast irons
09/30202029 DC : 0 BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES
09/30205276 DC : 0 BS EN 2311 - AEROSPACE SERIES - BUSHES WITH SELF-LUBRICATING LINER - TECHNICAL SPECIFICATION
98/105109 DC : DRAFT JUNE 1998 PREN 1317-5 - ROAD RESTRAINT SYSTEMS - PART 5: DURABILITY AND EVALUATION OF CONFORMITY
08/30189625 DC : 0 BS EN 10257-1 - ZINC OR ZINC ALLOY COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - PART 1: LAND CABLES
API 5L RUSSIAN : 2012 SPECIFICATION FOR LINE PIPE
04/30123264 DC : DRAFT OCT 2004 EN 10341 - COLD ROLLED ELECTRICAL NON-ALLOY AND ALLOY STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE
UNI EN 13601 : 2013 COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES
09/30202307 DC : 0 BS EN 12514-1 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS
UNI EN 10340 : 2008 STEEL CASTINGS FOR STRUCTURAL USES
03/312144 DC : DRAFT JULY 2003 ISO 13628-10 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10 - BONDED FLEXIBLE PIPE
UNI EN 13605 : 2013 COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES
06/30148769 DC : 0 EN 10249-1 - COLD FORMED STEEL SHEET PILING - PART 1: TECHNICAL DELIVERY CONDITIONS
PREN 4560 : 200P2 AEROSPACE SERIES - PIPE COUPLING, 37 DEGREES, SPHERICAL, UP TO 21000 KPA - INCH SERIES - TECHNICAL SPECIFICATION
I.S. EN ISO 15589-2:2014 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES (ISO 15589-2:2012)
PREN 2311 : 200P2 AEROSPACE SERIES - BUSHES WITH SELF-LUBRICATING LINER - TECHNICAL SPECIFICATION
PREN 2755 : 200P3 AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER - ELEVATED LOAD AT AMBIENT TEMPERATURE - TECHNICAL SPECIFICATION
I.S. EN 15776:2011 UNFIRED PRESSURE VESSELS - REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM CAST IRON WITH AN ELONGATION AFTER FRACTURE EQUAL OR LESS THAN 15%
EN 12449:2016 Copper and copper alloys - Seamless, round tubes for general purposes
API 5L CHINESE : 2012 SPECIFICATION FOR LINE PIPE
PREN 10208-3 : DRAFT 1997 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C
BS EN 10253-4:2008 Butt-welding pipe fittings Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
PREN 14276-2 : DRAFT 2017 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
PREN 4859 : DRAFT 2017 AEROSPACE SERIES - SENSOR BASED CLAMP LOAD DETERMINATION/HIGH TENSILE BOLTS - TECHNICAL SPECIFICATION
PREN 3021 : DRAFT 2015 AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION
PREN 3727 : 200P2 AEROSPACE SERIES - BEARINGS, AIRFRAME ROLLING, RIGID, WITH FLANGED ALIGNMENT HOUSING - DIMENSIONS AND LOADS
I.S. EN ISO 18797-1:2017 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS-POLYCHLOROPRENE OR EPDM (ISO 18797-1:2016)
PREN 303-1 : DRAFT 2016 HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING
ISO 683-1:2016 Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering
PREN 10028-6 : DRAFT 2014 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 6: WELDABLE FINE GRAIN STEELS, QUENCHED AND TEMPERED
I.S. EN 378-2:2016 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
I.S. EN ISO 14232-1:2017 THERMAL SPRAYING - POWDERS - PART 1: CHARACTERIZATION AND TECHNICAL SUPPLY CONDITIONS (ISO 14232-1:2017)
I.S. EN 3275:2002 AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES UP TO 28 000 KPA - DYNAMIC BEAM SEAL - METRIC SERIES - TECHNICAL SPECIFICATION
PREN 14140 : DRAFT 2012 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
API SPEC 17J : 2014 SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
I.S. EN 10169:2010 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS
18/30368654 DC : 0 BS EN 488 - DISTRICT HEATING PIPES - BONDED SINGLE PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FACTORY MADE STEEL VALVE ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND A CASING OF POLYETHYLENE
PREN 10120 : DRAFT 2014 STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS
I.S. EN ISO 21809-5:2017 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS (ISO 21809-5:2017)
I.S. EN 754-1:2016 ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
I.S. EN 10217-6:2002 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
I.S. EN 3021:2017 AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION
I.S. EN 13445-2:2014 UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
I.S. EN 1474-1:2008 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
BS EN 14917 : 2009 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
DIN 3016-1:2000-06 FASTENING CLAMPS - PART 1: WITH TONGUE
I.S. EN 2755:2009 AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER - ELEVATED LOAD AT AMBIENT TEMPERATURE - TECHNICAL SPECIFICATION
17/30346735 DC : 0 BS EN 10225-3 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 3: HOT FINISHED HOLLOW SECTIONS
PREN 1977 : DRAFT 2011 COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD)
PREN 10223-5 : DRAFT 2008 STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 5: STEEL WIRE WOVEN HINGED JOINT AND KNOTTED MESH FENCING
UNI EN 74-2 : 2009 COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES
PREN 10028-1 : DRAFT 2014 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
CEI EN 50183 : 2000 CONDUCTORS FOR OVERHEAD LINES - ALUMINIUM-MAGNESIUM-SILICON ALLOY WIRES
I.S. EN ISO 13628-15:2011 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS (ISO 13628-15:2011)
UNE-EN 74-2:2010 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures
18/30365854 DC : 0 BS EN 1337-6 - STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS
15/30324370 DC : 0 BS EN 3-8 - PORTABLE FIRE EXTINGUISHERS - PART 8: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 3-7
BS EN 10217-4:2002 Welded steel tubes for pressure purposes. Technical delivery conditions Electric welded non-alloy steel tubes with specified low temperature properties
UNE-EN 1090-5:2017 Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications
I.S. EN 15711:2009 VITREOUS AND PORCELAIN ENAMELS - GLASS LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS - QUALITY REQUIREMENTS
UNE-EN ISO 16120-1:2017 Non-alloy steel wire rod for conversion to wire - Part 1: General requirements (ISO 16120-1:2017)
16/30334287 DC : 0 BS EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURE UP TO 100 BAR
BS EN 15698-2:2015 District heating pipes. Preinsulated bonded twin pipe systems for directly buried hot water networks Fitting and valve assembly of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
PD CEN/TR 14585-3:2017 Corrugated metal hose assemblies for pressure applications Design method
UNI EN 14399-9 : 2009 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES
BS EN 10283:2010 Corrosion resistant steel castings
16/30319005 DC : 0 BS EN 12285-1 - WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS OTHER THAN FOR HEATING AND COOLING OF BUILDINGS
DIN EN 15129:2010-06 ANTI-SEISMIC DEVICES
14/30297831 DC : 0 BS EN 1090-4 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
17/30362892 DC : 0 BS EN 14025 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION
DIN EN 1090-3:2008-09 EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES
ONORM EN 1090-3 : 2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
EN 12261:2018 Gas meters - Turbine gas meters
BS EN 10217-5:2002 Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
UNE-EN 15776:2011 Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 %
DIN EN 334:2016-05 (Draft) GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
EN 10217-5:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
EN 10132-1:2000 Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 1: General
I.S. EN 10088-5:2009 STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
BS EN 12285-1:2003 Workshop fabricated steel tanks Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids
DIN EN 12285-1:2016-10 (Draft) WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS
BS EN 1090-3:2008 Execution of steel structures and aluminium structures Technical requirements for aluminium structures
EN 15048-1:2016 Non-preloaded structural bolting assemblies - Part 1: General requirements
NF EN 12542 : 2011 LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE
I.S. EN 10216-2:2013 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
EN 12167:2016 COPPER AND COPPER ALLOYS - PROFILES AND BARS FOR GENERAL PURPOSES
EN 1263-1:2014 Temporary works equipment - Safety nets - Part 1: Safety requirements, test methods
EN 10028-3:2017 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
EN 12165:2016 COPPER AND COPPER ALLOYS - WROUGHT AND UNWROUGHT FORGING STOCK
ISO 15374:1998 Implants for surgery — Requirements for production of forgings
I.S. EN 14382:2005 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
I.S. EN 13480-2:2017 METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS
I.S. EN 488:2015 DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - STEEL VALVE ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
EN 676:2003+A2:2008/AC:2008 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
I.S. EN 508-2:2008 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELFSUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM
ISO 21809-3:2016 Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings
I.S. EN 253:2009 DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PIPE ASSEMBLY OF STEEL SERVICE PIPE, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
DIN EN 13121-1:2003-10 GRP tanks and vessels for use above ground - Part 1: Raw materials; Specification conditions and acceptance conditions
EN 10222-1:2017 Steel forgings for pressure purposes - Part 1: General requirements for open die forgings
BS EN 13480-8:2017 Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping
BS EN 13480-2:2017 Metallic industrial piping Materials
BS EN 13480-8:2017+A1:2019 Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping
BS EN 10216-2:2013 Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified elevated temperature properties
DIN EN 13605:2013-09 Copper and copper alloys - Copper profiles and profiled wire for electrical purposes
DIN EN 13599:2014-12 COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES
DIN EN 12007-3:2015-07 GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNTIONAL REQUIREMENTS FOR STEEL
DIN EN 13223:2015-11 Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment
DIN EN 1759-1:2005-02 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
DIN EN 14532-1:2005-02 WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 1: PRIMARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS
DIN EN 12732:2014-07 Gas infrastructure - Welding steel pipework - Functional requirements (includes Amendment A1:2014)
DIN EN 15085-5:2008-01 Railway applications - Welding of railway vehicles and components - Part 5: Inspection, testing and documentation
DIN EN 12952-6:2011-10 Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler
DIN EN 1982:2016-01 (Draft) COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS
EN 13121-1:2003 GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - SPECIFICATION CONDITIONS AND ACCEPTANCE CONDITIONS
DIN EN ISO 22476-2:2012-03 Geotechnical investigation and testing - Field testing - Part 2: Dynamic probing (ISO 22476-2:2005 + Amd 1:2011) (includes Amendment A1:2011)
DIN EN 40-4:2006-06 Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns
DIN EN 1473:2016-10 Installation and equipment for liquefied natural gas - Design of onshore installations
DIN EN 10208-1:2009-07 STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
DIN EN 13602:2013-09 Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors
DIN EN 14382 E : 2009 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
DIN EN 13604:2013-09 Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper
DIN EN 12385-1:2009-01 STEEL WIRE ROPES - SAFETY - PART 1: GENERAL REQUIREMENTS
DIN EN 1715-1 E : 2008 ALUMINIUM AND ALUMINIUM ALLOYS - DRAWING STOCK - PART 1: GENERAL REQUIREMENTS AND TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
DIN EN 14398-1:2004-01 Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 1: Fundamental requirements
DIN EN 14359 E : 2017 GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
BS EN 13600:2013 Copper and copper alloys. Seamless copper tubes for electrical purposes
BS EN 764-5:2014 Pressure equipment Inspection documentation of metallic materials and compliance with the material specification
BS EN 14141:2013 Valves for natural gas transportation in pipelines. Performance requirements and tests
UNE-EN 378-2:2017 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
BS EN 40-4:2005 Lighting columns Requirements for reinforced and prestressed concrete lighting columns
BS EN 12079:1999 Offshore containers. Design, construction, testing, inspection and marking
BS EN 10154:2002 Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet. Technical delivery conditions
BS EN 14287:2004 Aluminium and aluminium alloys. Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components
BS EN 1301-1:2008 Aluminium and aluminium alloys. Drawn wire Technical conditions for inspection and delivery
BS EN ISO 13628-2:2006 Petroleum and natural gas industries. Design and operation of subsea production systems Unbonded flexible pipe systems for subsea and marine applications
BS EN 10250-1:1999 Open steel die forgings for general engineering purposes General requirements
UNE-EN ISO 15589-2:2014 Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline transportation systems - Part 2: Offshore pipelines (ISO 15589-2:2012)
BS EN 10095 : 1999-07 HEAT RESISTING STEELS AND NICKEL ALLOYS
13/30280057 DC : 0 BS EN 13782 - TEMPORARY STRUCTURE - TENTS - SAFETY
BS EN 10223-2:2012 Steel wire and wire products for fencing and netting Hexagonal steel wire netting for agricultural, insulation and fencing purposes
BS EN 10230-1:2000 Steel wire nails Loose nails for general applications
UNE-EN 10028-4:2017 Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
BS EN 13677-2:2003 Reinforced thermoplastic moulding compounds. Specification for GMT Methods of test and general requirements
BS EN 10304:2001 Magnetic materials (iron and steel) for use in relays
BS EN 13835:2012 Founding. Austenitic cast irons
UNE-EN 10107:2014 Grain-oriented electrical steel strip and sheet delivered in the fully processed state
BS EN 10113-1:1993 Hot-rolled products in weldable fine grain structural steels General delivery conditions
UNE-EN 10223-1:2013 Steel wire and wire products for fencing and netting - Part 1: Zinc and zinc-alloy coated steel barbed wire
BS EN ISO 3452-3:2013 Non-destructive testing. Penetrant testing Reference test blocks
BS EN 10028-5:2017 Flat products made of steels for pressure purposes Weldable fine grain steels, thermomechanically rolled
BS EN 2130:2001 Aerospace series. Bearings, precision ball in corrosion resisting steel for instruments and equipment. Technical specification
BS EN ISO 3452-2:2013 Non-destructive testing. Penetrant testing Testing of penetrant materials
BS EN ISO 10380:2012 Pipework. Corrugated metal hoses and hose assemblies
BS EN 14286:2008 Aluminium and aluminium alloys. Weldable rolled products for tanks for the storage and transportation of dangerous goods
UNE-EN 10272:2016 Stainless steel bars for pressure purposes
BS EN 13981-4:2006 Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery Forgings
UNE-EN 1559-1:2011 Founding - Technical conditions of delivery - Part 1: General
ISO 13628-10:2005 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe
BS EN 10088-2:2014 Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
ISO 15589-2:2012 Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines
ISO 9934-2:2015 Non-destructive testing — Magnetic particle testing — Part 2: Detection media
BS EN 10089:2002 Hot rolled steels for quenched and tempered springs. Technical delivery conditions
BS EN 877 : 1999 CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
BS EN 754-1:2016 Aluminium and aluminium alloys. Cold drawn rod/bar and tube Technical conditions for inspection and delivery
BS EN 13331-2:2002 Trench lining systems Assessment by calculation or test
BS EN 10111:2008 Continuously hot rolled low carbon steel sheet and strip for cold forming. Technical delivery conditions
BS EN 506:2008 Roofing products of metal sheet. Specification for self-supporting products of copper or zinc sheet
UNE-EN ISO 10380:2013 Pipework - Corrugated metal hoses and hose assemblies (ISO 10380:2012)
BS EN 13348:2016 Copper and copper alloys. Seamless, round copper tubes for medical gases or vacuum
UNE-EN 505:2013 Roofing products from metal sheet - Specification for fully supported roofing products of steel sheet
BS EN 14343:2005 Rotary positive displacement pumps. Performance tests for acceptance
BS EN 10214:1995 Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet. Technical delivery conditions
BS EN 1976:2012 Copper and copper alloys. Cast unwrought copper products
BS EN 10305-2:2016 Steel tubes for precision applications. Technical delivery conditions Welded cold drawn tubes
BS EN 13802:2013 Railway applications. Suspension components. Hydraulic dampers
BS EN 39:2001 Loose steel tubes for tube and coupler scaffolds. Technical delivery conditions
UNE-EN 10257-2:2012 Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 2: Submarine cables
UNE-EN 1976:2013 Copper and copper alloys - Cast unwrought copper products
BS EN 10341:2006 Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state
UNE-EN 764-5:2015 Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification
BS EN 12811-2:2004 Temporary works equipment Information on materials
BS EN 14382 : 2005 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
DIN EN 14893:2014-09 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
BS EN 10205:2016 Cold reduced tinmill products. Blackplate
BS EN 303-5:2012 Heating boilers Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW. Terminology, requirements, testing and marking
BS EN 10272:2007 Stainless steel bars for pressure purposes
14/30278953 DC : 0 BS ISO 17842-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE
I.S. EN 14276-1:2006 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
DIN EN 10296-1 E : 2004 WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES
BS EN 487:2009 Aluminium and aluminium alloys. Rolling ingots. Specifications
BS EN 10340:2007 Steel castings for structural uses
BS EN 10028-6:2017 Flat products made of steels for pressure purposes Weldable fine grain steels, quenched and tempered
UNE-EN 10106:2016 Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state
BS EN 14015:2004 Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above
BS EN 1655:1997 Copper and copper alloys. Declarations of conformity
BS EN 4560:2015 Aerospace series. Pipe coupling 37°, spherical up to 21 000 kPa. Inch series. Technical specification
DIN EN 10305-1:2016-08 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES
BS EN 10249-1:1996 Cold formed sheet piling of non alloy steels Technical delivery conditions
BS EN 12699:2015 Execution of special geotechnical works. Displacement piles
BS EN 14616:2004 Thermal spraying. Recommendations for thermal spraying
BS EN 14075:2002 Static welded steel cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m<sup>3</sup> and for installation underground. Design and manufacture
BS EN 12420:2014 Copper and copper alloys. Forgings
BS EN 10169-1:2003 Continuously organic coated (coil coated) steel flat products General information (definitions, materials, tolerances, test methods)
BS EN 1592-1:1998 Aluminium and aluminium alloys. HF seam welded tubes Technical conditions for inspection and delivery
BS EN 1559-1:2011 Founding. Technical conditions of delivery General
BS EN 14879-5:2007 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on concrete components
BS EN 14420-7:2013 Hose fittings with clamp units Cam locking couplings
BS EN 10238:2009 Automatically blast-cleaned and automatically prefabrication primed structural steel products
BS EN 505:2013 Roofing products from metal sheet. Specification for fully supported roofing products of steel sheet
I.S. EN 10084:2008 CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
I.S. EN 13601:2013 COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES
DIN EN 10083-2:2006-10 STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS
DIN EN 12493:2017-01 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
UNI EN 508-3 : 2008 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 3: STAINLESS STEEL
I.S. EN 10223-5:2012 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 5: STEEL WIRE WOVEN HINGED JOINT AND KNOTTED MESH FENCING
I.S. EN 10223-6:2012 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 6: STEEL WIRE CHAIN LINK FENCING
DIN EN 1562:2012-05 FOUNDING - MALLEABLE CAST IRONS
I.S. EN 10305-2:2016 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES
I.S. EN 13148:2010 COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP
I.S. EN 12699:2015 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DISPLACEMENT PILES
I.S. EN 10223-7:2012 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING
I.S. EN 14424:2013 HOSE FITTINGS WITH SCREWED FERRULES
I.S. EN 10216-4:2013 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
I.S. EN 10120:2017 STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS
I.S. EN 10222-1:2017 STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS FOR OPEN DIE FORGINGS
I.S. EN 10106:2015 COLD ROLLED NON-ORIENTED ELECTRICAL STEEL SHEET AND STRIP DELIVERED IN THE FULLY PROCESSED STATE
I.S. EN 877:2000 CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
EN 10149-1:2013 Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions
DIN EN 14866:2006-03 VITREOUS AND PORCELAIN ENAMELS - REGENERATIVE, ENAMELLED AND PACKED PANELS FOR AIR-GAS AND GAS-GAS HEAT EXCHANGERS - SPECIFICATIONS
EN 13349:2002 Copper and coppper alloys - Pre-insulated copper tubes with solid covering
DIN EN 13941:2003-10 DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DIRECT HEATING
EN 12810-1:2003 Façade scaffolds made of prefabricated components - Part 1: Products specifications
EN 1251-1:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 1: Fundamental requirements
DIN EN 14782:2006-03 Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements
EN 12811-2:2004 Temporary works equipment - Part 2: Information on materials
I.S. EN 10242:1995 THREADED PIPE FITTING IN MALLEABLE CAST IRON
EN 1069-1:2017 Water slides - Part 1: Safety requirements and test methods
EN 10327:2004 Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions
EN 10297-1:2003 Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
EN 13575:2012 Static thermoplastic tanks for the above ground storage of chemicals — Blow moulded or rotationally moulded polyethylene tanks — Requirements and test methods
EN 13084-7:2012 Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners
EN 1337-8:2007 Structural bearings - Part 8: Guide Bearings and Restraint Bearings
DIN EN 13706-2:2003-02 REINFORCED PLASTICS COMPOSITES - SPECIFICATIONS FOR PULTRUDED PROFILES - PART 2: METHODS OF TEST AND GENERAL REQUIREMENTS
EN 10277-1:2008 Bright steel products - Technical delivery conditions - Part 1: General
EN 10230-1:1999 Steel wire nails - Part 1: Loose nails for general applications
EN 10263-1:2017 Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions
EN 50052:2016 High-voltage switchgear and controlgear - Gas-filled cast aluminium alloy enclosures
EN 10223-8:2013 Steel wire and wire products for fencing and netting - Part 8: Welded mesh gabion products
EN 10305-3:2016 Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
EN 10248-1:1995 Hot rolled sheet piling of non alloy steels - Part 1: Technical delivery conditions
EN 10253-4:2008/AC:2009 BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
EN 10223-7:2012 Steel wire and wire products for fencing and netting - Part 7: Steel wire welded panels for fencing
EN ISO 14232-1:2017 Thermal spraying - Powders - Part 1: Characterization and technical supply conditions (ISO 14232-1:2017)
EN 12952-2:2011 Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
EN 10254:1999 Steel closed die forgings - General technical delivery conditions
EN 1092-3:2003/AC:2007 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES
EN 10242:1994/A2:2003 THREADED PIPE FITTING IN MALLEABLE CAST IRON
EN 10335:2005 Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption - Non alloyed electrolytic chromium/chromium oxide coated steel
EN 12952-14:2004 Water-tube boilers and auxiliary installations - Part 14: Requirements for flue gas DENOX-systems using liquified pressurized ammonia and ammonia water solution
EN 10088-2:2014 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
EN 12952-5:2011 Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler
EN 1057:2006+A1:2010 Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
EN 10209:2013 Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions
EN ISO 16120-1:2017 NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS (ISO 16120-1:2017)
EN 10224:2002/A1:2005 NON-ALLOY STEEL TUBES AND FITTINGS FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS
DIN EN 12952-14:2004-09 Water-tube boilers and auxiliary installations - Part 14: Requirements for fluegas DENOX systems using liquified pressurized ammonia and ammonia water solution
EN 12079 : 1999 OFFSHORE CONTAINERS - DESIGN, CONSTRUCTION, TESTING, INSPECTION AND MARKING
EN 10223-3:2013 Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes
EN 10216-1:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
EN 10210-1:2006 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN 10273:2016 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
EN 12166:2016 Copper and copper alloys - Wire for general purposes
EN 10270-1:2011+A1:2017 Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire
EN 12080:2017 Railway applications - Axleboxes - Rolling bearings
EN 10245-1:2011 Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
DIN EN 508-2:2009-07 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM
EN 10268:2006+A1:2013 COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
EN 10088-3:2014 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
DIN EN 1090-5:2017-07 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
DIN EN 15711:2009-08 VITREOUS AND PORCELAIN ENAMELS - GLASS LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS - QUALITY REQUIREMENTS
EN 1274:2004 Thermal spraying - Powders - Composition, technical supply conditions
EN 12547:2014 Centrifuges - Common safety requirements
EN 10271:1998 Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions
EN 12943:1999 Filler materials for thermoplastics - Scope, designation, requirements, tests
EN 10296-1:2003 Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
EN 12285-2 : 2005 WORKSHOP FABRICATED STEEL TANKS - PART 2: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE ABOVEGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS
EN 10270-2:2011 Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire
DIN EN 508-1:2000-12 ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL
EN 10120:2017 Steel sheet and strip for welded gas cylinders
EN 10245-2:2011 Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire
EN 10219-1:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN 10088-4:2009 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
EN 12438:2017 Magnesium and magnesium alloys - Magnesium alloys for cast anodes
CR 12952-17:2002 Water boilers and auxiliary installations - Part 17: Guideline for the involvement of an inspection body independent of the manufacturer
EN 10249-1:1995 Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions
EN 12421:2017 Magnesium and magnesium alloys - Unalloyed magnesium
EN 10333:2005 Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Tin coated steel (tinplate)
DIN EN 14616:2005-02 THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING
DIN EN 10292:2007-06 CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STEELS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
EN 10312:2002/A1:2005 WELDED STAINLESS STEEL TUBES FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS
EN 10269:2013 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
EN 10305-5:2016 Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes
EN 10169-2:2006 Continuously organic coated (coil coated) steel flat products - Part 2: Products for building exterior applications
EN 10021:2006 General technical delivery conditions for steel products
EN 13195:2013 Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore)
EN 10294-1:2005 Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels
CEN/TS 45545-7:2009 Railway applications - Fire protection on railway vehicles - Part 7: Fire safety requirements for flammable liquid and flammable gas installations
EN 10025-1:2004 Hot rolled products of structural steels - Part 1: General technical delivery conditions
DIN EN 12811-2:2004-04 Temporary works equipment - Part 2: Information on materials; German version EN 12811-2:2004
EN 13458-1:2002 Cryogenic vessels - Static vacuum insulated vessels - Part 1: Fundamental requirements
EN 10208-1:2009 Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A
EN 10028-6:2017 Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered
EN 61987-12:2016 Industrial- Process Measurement and Control - Data Structures and Elements in Process Equipment Catalogues - Part 12: Lists of properties (LOPs) for flow measuring equipment for electronic data exchange
EN 10272:2016 Stainless steel bars for pressure purposes
EN 10304:2001 Magnetic materials (iron and steel) for use in relays
EN 10169-3:2003 Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications
EN 10253-1:1999 Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements
CEN/TR 14549:2004 Guide to the use of ISO 15649 and ANSI/ASME B31.3 for piping in Europe in compliance with the Pressure Equipment Directive
EN 10223-2:2012 Steel wire and wire products for fencing and netting - Part 2: Hexagonal steel wire netting for agricultural, insulation and fencing purposes
CEN/TR 1317-6 : 2012 ROAD RESTRAINT SYSTEMS - PART 6: PEDESTRIAN RESTRAINT SYSTEM - PEDESTRIAN PARAPETS
EN 10297-2:2005/AC:2007 SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL
EN 10152:2017 Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions
EN 61987-13:2016 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 13: Lists of properties (LOP) for Pressure Measuring Equipment for electronic data exchange
EN 10305-2:2016 Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes
EN 10147 : 2000 CONTINUOUSLY HOT-DIP ZINC COATED STRUCTURAL STEELS SHEET AND STRIP - TECHNICAL DELIVERY CONDITIONS
UNI EN 877 : 2007 CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
EN 10253-3:2008 Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
EN 10257-2:2011 Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 2: Submarine cables
EN 10326:2004 Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions
EN 10245-3:2011 Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire
EN 10162:2003 Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances
EN 10238:2009 Automatically blast-cleaned and automatically prefabrication primed structural steel products
EN 10223-5:2012 Steel wire and wire products for fencing and netting - Part 5: Steel wire woven hinged joint and knotted mesh fencing
DIN EN 1069-1:2017-11 WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS
EN 10245-5:2011 Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire
EN 10296-2:2005/AC:2007 WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL
EN 10305-6:2016 Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
EN 1337-2:2004 Structural bearings - Part 2: Sliding elements
EN 12735-2:2016 Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment
EN 10257-1:2011 Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 1: Land cables
EN 10130:2006 Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions
CEN/TR 16862:2015 Plastics welding supervisor - Task, responsibilities, knowledge, skills and competence
DIN EN 10238:2009-10 AUTOMATICALLY BLAST-CLEANED AND AUTOMATICALLY PREFABRICATION PRIMED STRUCTURAL STEEL PRODUCTS
CEN Guide 4:2008 GUIDE FOR ADDRESSING ENVIRONMENTAL ISSUES IN PRODUCT STANDARDS
EN 508-3:2008 Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel
DIN EN 1090-2:2011-10 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN 10205:2017-03 COLD REDUCED TINMILL PRODUCTS - BLACKPLATE
I.S. EN 12284:2003 REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING
EN 12392:2016 Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment
UNI EN 12732 : 2014 GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS
EN 10168:2004 Steel products - Inspection documents - List of information and description
EN 13530-1:2002 Cryogenic vessels - Large transportable vacuum insulated vessels - Part 1: Fundamental requirements
EN 877:1999/A1:2006/AC:2008 CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
EN 10107:2014 Grain-oriented electrical steel strip and sheet delivered in the fully processed state
EN 10205:2016 Cold reduced tinmill products - Blackplate
UNI EN 508-1 : 2014 ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL
EN 10292:2007 Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming - Technical delivery conditions
EN 10207:2017 Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars
EN 10357:2013 Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
EN 13348:2016 Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum
EN 10213-1 : 1995 TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 1: GENERAL
EN 12693:2008 Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors
EN 1337-4:2004/AC:2007 STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS
EN 10028-5:2017 Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
EN 10223-4:2012 Steel wire and wire products for fencing and netting - Part 4: Steel wire welded mesh fencing
EN 10090:1998 Valve steels and alloys for internal combustion engines
EN 1337-5:2005 Structural bearings - Part 5: Pot bearings
EN 10016-1:1994 Non-alloy steel rod for drawing and/or cold rolling - Part 1: General requirements
EN 1337-6:2004 Structural bearings - Part 6: Rocker bearings
EN 13480-4:2017 Metallic industrial piping - Part 4: Fabrication and installation
EN 12451:2012 Copper and copper alloys - Seamless, round tubes for heat exchangers
EN 12385-1:2002+A1:2008 Steel wire ropes - Safety - Part 1: General requirements
EN 10214 : 1995 CONTINUOUSLY HOT-DIP ZINC-ALUMINIUM (ZA) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS
EN 50149:2012 Railway applications - Fixed installations - Electric traction - Copper and copper alloy grooved contact wires
EN 13110:2012+A1:2017 LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction
EN 10169:2010+A1:2012 Continuously organic coated (coil coated) steel flat products - Technical delivery conditions
EN 13195-1 : 2002 ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) - PART 1: SPECIFICATIONS
EN 10028-1:2017 Flat products made of steels for pressure purposes - Part 1: General requirements
EN 12953-2:2012 Shell boilers - Part 2: Materials for pressure parts of boilers and accessories
EN 12186:2014 Gas infrastructure - Gas pressure regulating stations for transmission and distribution - Functional requirements
DIN EN 13195-1:2002-11 ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) - PART 1: SPECIFICATIONS
EN 10083-2:2006 Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels
EN 10165 : 1995 COLD ROLLED ELECTRICAL ALLOYED STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE
EN 10111:2008 Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions
DIN EN 15551:2011-01 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
I.S. EN 15085-5:2007 RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 5: INSPECTION, TESTING AND DOCUMENTATION
I.S. EN 15085-4:2007 RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 4: PRODUCTION REQUIREMENTS
I.S. EN 10248-1:1996 HOT ROLLED SHEET PILING OF NON ALLOY STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS
I.S. EN 45545-7:2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 7: FIRE SAFETY REQUIREMENTS FOR FLAMMABLE LIQUID AND FLAMMABLE GAS INSTALLATIONS
EN 14423:2013+A1:2016 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
PREN 13774 : DRAFT 2011 VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS
PREN 13605 : DRAFT 2011 COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES
PREN 14015-1 : DRAFT 2000 SPECIFICATION FOR THE DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED, ABOVE GROUND, WELDED, METALLIC TANKS FOR THE STORAGE OF LIQUIDS AT AMBIENT TEMPERATURE AND ABOVE - PART 1: STEEL TANKS
EN 13600:2013 Copper and copper alloys - Seamless copper tubes for electrical purposes
UNI EN 16482 : 2014 FOUNDING - CONTINUOUS CAST IRON BARS
DIN EN 10245-5:2012-01 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
DIN EN 16031:2012-09 ADJUSTABLE TELESCOPIC ALUMINUM PROPS - PRODUCT SPECIFICATIONS, DESIGN AND ASSESSMENT BY CALCULATION AND TESTS
02/713774 DC : DRAFT DEC 2002 EN 10336 - CONTINUOUSLY HOT-DIP COATED AND ELECTROLYTICALLY COATED STRIP AND SHEET OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
96/700629 DC : DRAFT JAN 1996 PREN 12284 REFRIGERATION SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING
PREN 10303 : DRAFT 2013 THIN MAGNETIC STEEL SHEET AND STRIP FOR USE AT MEDIUM FREQUENCIES
PREN 13601 : DRAFT 2011 COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES
DIN EN 1337-8:2008-01 STRUCTURAL BEARINGS - PART 8: GUIDE BEARINGS AND RESTRAINT BEARINGS
DIN EN 14917:2012-06 Metal bellows expansion joints for pressure applications (includes Amendment A1:2012)
17/30358538 DC : 0 BS EN 3275 - AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES UP TO 28000 KPA - DYNAMIC BEAM SEAL - METRIC SERIES - TECHNICAL SPECIFICATION
14/30293465 DC : 0 BS EN 13445-10 - UNFIRED PRESSURE VESSELS - PART 10: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF NICKEL AND NICKEL ALLOYS
BS EN 4814:2017 Aerospace series. Flange couplings up to 21 000 kPa. Technical specification. Inch series
BIS IS/ISO 3183 : 2007 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS
09/30202316 DC : 0 BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES
I.S. EN 14866:2006 VITREOUS AND PORCELAIN ENAMELS - REGENERATIVE, ENAMELLED AND PACKED PANELS FOR AIR-GAS AND GAS-GAS HEAT EXCHANGERS - SPECIFICATIONS
BS EN 10217-1:2002 Welded steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties
BS EN 10217-2 : 2002 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
09/30197538 DC : 0 BS ISO 12778 - VITREOUS AND PORCELAIN ENAMELS - GLASS LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS - QUALITY REQUIREMENTS
PD CEN/TR 13445-101:2015 Unfired pressure vessels. Example of application
10/30234625 DC : 0 BS EN 14420-1 - HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, SURVEY, DESIGNATION AND TESTING
13/30266550 DC : 0 BS EN 14509 - SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
I.S. EN 10165:1996 COLD ROLLED ELECTRICAL ALLOYED STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE
09/30186448 DC : 0 BS EN 13941 - DESIGN AND INSTALLATION OF REINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING
95/102726 DC : DRAFT MARCH 1995 PREN 1873 - PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS WITH UPSTANDS
PD CEN/TR 16862:2015 Plastics welding supervisor. Task, responsibilities, knowledge, skills and competence
BS EN 14545:2008 Timber structures. Connectors. Requirements
EN 10217-7:2014 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
BS EN 61987-13:2016 Industrial-process measurement and control. Data structures and elements in process equipment catalogues Lists of properties (LOP) for Pressure Measuring Equipment for electronic data exchange
05/30137621 DC : DRAFT AUG 2005 EN 1564/PRA1 - FOUNDING - AUSTEMPERED DUCTILE CAST IRONS
DIN EN 10253-2:2008-09 Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
06/30150265 DC : 0 EN 1474-1 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
13/30280729 DC : 0 BS EN 12186 - GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS
14/30312146 DC : 0 BS EN 1090-5 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED ALUMINIUM ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
DIN 28115:2003-02 CARBON STEEL NOZZLES - PN 10 TO PN 40
13/30280395 DC : 0 BS EN 10346 - CONTINUOUSLY HOT-DIP COATED STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS
96/709571 DC : DRAFT JUL 1996 PREN 10286 - STEEL TUBES AND FITTINGS FOR ON AND OFFSHORE PIPELINES - EXTERNAL THREE LAYER EXTRUDED POLYPROPYLENE BASED COATINGS
PREN 1090-3 : DRAFT 2017 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
I.S. EN 10213:2007 STEEL CASTINGS FOR PRESSURE PURPOSES
UNI EN 13195 : 2013 ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE)
ISO 16228:2017 Fasteners — Types of inspection documents
BS ISO 3310-1:2016 Test sieves. Technical requirements and testing Test sieves of metal wire cloth
09/30200834 DC : 0 BS EN 1559-1 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
14/30294473 DC : 0 BS EN 488 - DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - STEEL VALVE ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
I.S. EN 15689:2009 RAILWAY APPLICATIONS - TRACK - SWITCHES AND CROSSINGS - CROSSING COMPONENTS MADE OF CAST AUSTENITIC MANGANESE STEEL
UNI EN 1562 : 2012 FOUNDING - MALLEABLE CAST IRONS
12/30259073 DC : 0 BS EN 764-5 - PRESSURE EQUIPMENT - PART 5: INSPECTION DOCUMENTATION OF METALLIC MATERIALS AND COMPLIANCE WITH THE MATERIAL SPECIFICATION
DIN EN 16451:2015-09 RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER
18/30347942 DC : DRAFT APR 2018 BS ISO 20766-9 - ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEMS COMPONENTS - PART 9: PRESSURE RELIEVE DEVICE (PRD)
BS EN 10223-8:2013 Steel wire and wire products for fencing and netting Welded mesh gabion products
13/30248693 DC : 0 BS EN 14893 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
16/30338749 DC : 0 BS EN ISO 21809-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS
14/30300966 DC : 0 BS EN 1442 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
12/30270633 DC : 0 BS EN 10222-1 - STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
16/30301923 DC : 0 BS EN ISO 14232-1 - THERMAL SPRAYING - POWDERS - PART 1: CHARACTERISATION AND TECHNICAL SUPPLY CONDITIONS
DIN EN 15001-1:2011-02 Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
ISO 17746:2016 Steel wire rope net panels and rolls Definitions and specifications
BS ISO 18797-1 : 2016 COR 2017 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMSPOLYCHLOROPRENE OR EPDM
I.S. EN 10213-1:1996 TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 1: GENERAL
UNI EN ISO 13628-15 : 2011 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS
PREN 14382 : DRAFT 2016 GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURE UP TO 100 BAR
BS EN 1866-2:2014 Mobile fire extinguishers Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1
09/30169302 DC : 0 BS EN ISO 16120-1 - NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS
01/715236 DC : DRAFT NOV 2001 BS EN 14343 - POSITIVE DISPLACEMENT PUMPS - PERFORMANCE TEST FOR ACCEPTANCE
08/30189610 DC : 0 BS EN 10223-4 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 4: STEEL WIRE WELDED MESH FENCING
DIN EN ISO 28721-4:2016-03 VITREOUS AND PORCELAIN ENAMELS - GLASSLINED APPARATUS FOR PROCESS PLANTS - PART 4: QUALITY REQUIREMENTS FOR GLASSLINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS (ISO 28721-4:2015)
BS EN 15711:2009 Vitreous and porcelain enamels. Glass lined flanged steel pipes and flanged steel fittings. Quality requirements
BS EN ISO 14232-1:2017 Thermal spraying. Powders Characterization and technical supply conditions
17/30347933 DC : 0 BS ISO 20766-4 - ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEM COMPONENTS - PART 4: LEVEL INDICATOR
BS ISO 3310-2:2013 Test sieves. Technical requirements and testing Test sieves of perforated metal plate
BS EN ISO/IEC 80079-34:2011 Explosive atmospheres Application of quality systems for equipment manufacture
11/30239494 DC : 0 BS EN 10149-2 - HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS
BS EN 16031:2012 Adjustable telescopic aluminium props. Product specifications, design and assessment by calculation and tests
12/30266965 DC : 0 BS EN ISO 14920 - THERMAL SPRAYING - SPRAYING AND FUSING OF SELF-FLUXING ALLOYS
DIN EN 16482:2014-09 FOUNDING - CONTINUOUS CAST IRON BARS
BS EN 10245-5:2011 Steel wire and wire products. Organic coatings on steel wire Polyamide coated wire
11/30253751 DC : 0 BS EN 10269 - STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES
PREN 1317-5 : DRAFT 2013 ROAD RESTRAINT SYSTEMS - PART 5: PRODUCT REQUIREMENTS, TEST AND ASSESSMENT METHODS AND ACCEPTANCE CRITERIA
PREN 12438 : DRAFT 2015 MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOYS FOR CAST ANODES
I.S. CEN TR 14549:2004 GUIDE TO THE USE OF ISO 15649 AND ANSI/ASME B31.3 FOR PIPING IN EUROPE IN COMPLIANCE WITH THE PRESSURE EQUIPMENT DIRECTIVE
08/30189607 DC : 0 BS EN 10223-3 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 3: HEXAGONAL STEEL WIRE NETTING FOR ENGINEERING PURPOSES
BS ISO 15374:1998 Implants for surgery. Requirements for production of forgings
11/30248684 DC : 0 BS EN 14129 - LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG TANKS
NF EN 3275 : 2002 AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES UP TO 28 000 KPA - DYNAMIC BEAM SEAL - METRIC SERIES - TECHNICAL SPECIFICATION
15/30327671 DC : 0 BS EN 10152 - ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
10/30219381 DC : 0 BS EN 13084-7 - FREE-STANDING CHIMNEYS - PART 7: PRODUCT SPECIFICATIONS OF CYLINDRICAL STEEL FABRICATIONS FOR USE IN SINGLE WALL STEEL CHIMNEYS AND STEEL LINERS
07/30107797 DC : 0 BS EN 14399-9 - HIGH STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - BOLT AND NUT ASSEMBLIES WITH DIRECT TENSION INDICATORS
DIN EN 15698-2:2015-11 DISTRICT HEATING PIPES - PREINSULATED BONDED TWIN PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PART 2: FITTING AND VALVE ASSEMBLY OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
PD CEN/TR 16949:2016 Road restraint system. Pedestrian restraint system. Pedestrian parapets
BS EN 16617:2015 Pipework. Corrugated metal hose assemblies for combustible gas. Performance requirements, testing and marking
16/30354036 DC : 0 BS EN 4854-3 - AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS - PART 3: TECHNICAL SPECIFICATION
98/712789 DC : DRAFT AUG 98 PREN 10302 - CREEP RESISTING STEELS, NICKEL AND COBALT ALLOYS
UNI EN 10217-7 : 2014 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
08/30189613 DC : 0 BS EN 10223-5 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 5: STEEL WIRE WOVEN HINGED JOINT AND KNOTTED MESH FENCING
16/30314617 DC : 0 BS ISO 19469-3 - PLASTIC PIPING SYSTEMS FOR NON PRESSURE UNDERGROUND DRAINAGE - SINGLE WALL CORRUGATED PIPING SYSTEMS OF POLYETHYLENE (PE), POLYPROPYLENE (PP) AND UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 3: PIPES AND FITTINGS FOR DEEP BURIAL INSTALLATIONS
98/123516 DC : DRAFT JULY 1998 PREN 13121-1 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - ACCEPTANCE CONDITIONS AND USAGE CONDITIONS
11/30249105 DC : 0 BS EN 12516-1 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS
DD CEN/TS 14421:2006 Hose tail and ferrule for crimping and swaging
UNI EN 1515-4 : 2010 FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
BS ISO 28721-4 : 2010 VITREOUS AND PORCELAIN ENAMELS - GLASS-LINED APPARATUS FOR PROCESS PLANTS - PART 4: QUALITY REQUIREMENTS FOR GLASS-LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS
15/30324994 DC : 0 BS EN 10305-3 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDED COLD SIZED TUBES
API 6DSS REDLINE : 2009 SPECIFICATION FOR SUBSEA PIPELINE VALVES
02/105004 DC : DRAFT JULY 2002 PREN 14509 - SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING SANDWICH PANELS - FACTORY MADE PRODUCTS - SPECIFICATION
07/30166915 DC : DRAFT AUG 2007 BS EN 15714-4 - INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
05/30128234 DC : DRAFT FEB 2005 EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
08/30190329 DC : DRAFT DEC 2008 BS EN 10238 - AUTOMATICALLY BLAST-CLEANED AND AUTOMATICALLY PREFABRICATION PRIMED STRUCTURAL STEEL PRODUCTS
PREN 10253-4 : DRAFT 2017 BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
BS EN ISO 13628-15:2011 Petroleum and natural gas industries. Design and operation of subsea production systems Subsea structures and manifolds
PREN 10139 : DRAFT 2013 COLD ROLLED UNCOATED MILD STEEL NARROW STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
07/30168410 DC : DRAFT DEC 2007 BS EN 508-3 - ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 3: STAINLESS STEEL
CEN/TR 16949:2016 Road restraint system - Pedestrian restraint system - Pedestrian parapets
11/30235009 DC : 0 BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES
DIN EN 10139:2016-06 COLD ROLLED UNCOATED LOW CARBON STEEL NARROW STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
BS EN ISO 21809-5:2017 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems External concrete coatings
PREN 12732 : DRAFT 2009 GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS
17/30313373 DC : 0 BS ISO 21809-11 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 11: COATING REPAIRS ON REHABILITATION
PREN 1329-1 : DRAFT 2013 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
PREN 10088-2 : DRAFT 2011 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
DIN EN 14509:2013-12 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
03/105149 DC : DRAFT MAR 2003 PREN 14620-2 - DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED STEEL TANKS FOR THE STORAGE OF REFRIGERATED, LIQUEFIED GASES WITH OPERATING TEMPERATURES BETWEEN -5 DEGREES C AND -165 DEGREES C - PART 2: METALLIC COMPONENTS
BS EN 61987-16:2017 Industrial-process measurement and control. Data structures and elements in process equipment catalogues List of properties (LOPs) for density measuring equipment for electronic data exchange
PREN 13480-4 : DRAFT 2011 METALLIC INDUSTRIAL PIPING - PART 4: FABRICATION AND INSTALLATION
09/30207501 DC : 0 BS EN 10217-1 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
15/30303100 DC : 0 BS EN 50052 - CAST ALUMINIUM ALLOY ENCLOSURES FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR
BS ISO 9044:2016 Industrial woven wire cloth. Technical requirements and tests
03/103470 DC : DRAFT FEB 2003 BS EN 10219-1 - COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY REQUIREMENTS
09/30185942 DC : 0 BS EN 13835 - FOUNDING - AUSTENITIC CAST IRONS
PREN 1090-2 : DRAFT 2015 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
99/707160 DC : DRAFT APR 99 DRAFT BS: PREN 13480-3 - METALLIC INDUSTRIAL PIPING - DESIGN AND CALCULATION
BS EN 10338:2015 Hot rolled and cold rolled non-coated products of multiphase steels for cold forming. Technical delivery conditions
BS EN 50052:2016 High-voltage switchgear and controlgear. Gas-filled cast aluminium alloy enclosures
DIN EN 12952 SUPP 1 E : 2002 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 17: GUIDELINE FOR THE INVOLVEMENT OF AN INSPECTION BODY INDEPENDENT OF THE MANUFACTURER
PREN 10223-6 : DRAFT 2008 STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 6: STEEL WIRE CHAIN LINK FENCING
15/30304304 DC : 0 BS EN 12080 - RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS
04/30098945 DC : DRAFT OCT 2004 EN ISO 3452-2 - NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 2: TESTING OF PENETRANT MATERIALS
08/30187561 DC : 0 BS EN 10028-4 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 4: NICKEL ALLOY STEELS WITH SPECIFIED LOW TEMPERATURE PROPERTIES
PREN 13600 : DRAFT 2011 COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES
API SPEC 17E : 2017 SPECIFICATION FOR SUBSEA UMBILICALS
03/314351 DC : 0 EN 378-2 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
11/30239433 DC : 0 BS EN 12449 - COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES
04/30050372 DC : DRAFT JUN 2004 EN 13981-3 - ALUMINIUM AND ALUMINIUM ALLOYS - PRODUCTS FOR STRUCTURAL RAILWAY APPLICATIONS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY - PART 3: CASTINGS
BS EN 15551:2017 Railway applications. Railway rolling stock. Buffers
PREN 10217-4 : DRAFT 2009 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
07/30165591 DC : 0 BS EN 15689 - RAILWAY APPLICATIONS - TRACK - SWITCHES AND CROSSINGS - CAST AUSTENITIC MANGANESE STEEL FOR CROSSING COMPONENTS
06/30136240 DC : 0 EN 12020-1 - ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
PREN 12186 : DRAFT 2013 GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS
PREN 764-5 : DRAFT 2012 PRESSURE EQUIPMENT - PART 5: INSPECTION DOCUMENTATION OF METALLIC MATERIALS AND COMPLIANCE WITH THE MATERIAL SPECIFICATION
PREN 10257-1 : DRAFT 2008 ZINC OR ZINC ALLOY COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - PART 1: LAND CABLES
05/30132585 DC : DRAFT APR 2005 EN 10083-1 - STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
BS EN 13445-10:2015 Unfired pressure vessels Additional requirements for pressure vessels of nickel and nickel alloys
I.S. EN ISO 3183:2012 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012)
EN 12079-2 : 2006 OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 2: LIFTING SETS - DESIGN, MANUFACTURE AND MARKING
04/30117386 DC : DRAFT JUL 2004 EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
BS EN 4649:2009 Aerospace series. Handheld fire extinguishers with synthesis gases, for aircraft use. Technical specification and qualification conditions
08/30184312 DC : DRAFT SEP 2008 BS EN 12952-6 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 6: INSPECTION DURING CONSTRUCTION; DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER
PREN 10283 : DRAFT 2009 CORROSION RESISTANT STEEL CASTINGS
BS EN 13445-8 : 2014 UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS
07/30145003 DC : DRAFT JAN 2007 EN 1386 - ALUMINIUM AND ALUMINIUM ALLOYS - TREAD PLATE - SPECIFICATIONS
BS ISO 16380 : 2014 ROAD VEHICLES - BLENDED FUELS REFUELLING CONNECTOR
01/708775 DC : DRAFT MAY 2001 PREN 10297-2 - SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL TUBES
BS ISO 13628-10 : 2005 AMD 16775 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10: SPECIFICATION FOR BONDED FLEXIBLE PIPE
PD CEN/TR 14549:2004 Guide to the use of ISO 15649 and ANSI/ASME B31.3 for piping in Europe in compliance with the Pressure Equipment Directive
PREN 4816 : DRAFT 2015 AEROSPACE SERIES - FLANGE COUPLINGS - GASKET SEAL WITH NICKEL ALLOY C SEAL - TECHNICAL SPECIFICATION - INCH SERIES
PREN 14783 : DRAFT 2012 FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
UNI CEN/TR 1317-6 : 2012 ROAD RESTRAINT SYSTEMS - PART 6: PEDESTRIAN RESTRAINT SYSTEM - PEDESTRIAN PARAPETS
UNE-EN 14399-1:2016 High-strength structural bolting assemblies for preloading - Part 1: General requirements
DIN EN 14893 E : 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
PREN 3275 : 200P1 AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES UP TO 28000 KPA DYNAMIC BEAM SEAL - METRIC SERIES - TECHNICAL SPECIFICATION
ONORM EN 334 : JUN 2009 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
PREN 303-5 : DRAFT 2010 CENTRAL-HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, HAND AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
PREN 4691-1 : DRAFT 2015 AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION
PREN 764-4 : DRAFT 2012 PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS
PREN 3840 : 200P2 AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION
I.S. EN 334:2005 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
I.S. EN 16914:2017 ALUMINIUM AND ALUMINIUM ALLOYS - HOT-ROLLED ARMOUR PLATES IN WELDABLE ALUMINIUM ALLOY - TECHNICAL DELIVERY CONDITIONS
EN 4691-1:2017 Aerospace series - Tie rod with integrated bolts - Part 1: Technical specification
UNI EN 1329-1 : 2014 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
I.S. EN 1069-1:2017 WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN 10217-4:2002 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
NF EN 1515-4 : 2010 FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
PREN 10149-2 : DRAFT 2011 HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS
I.S. EN ISO/IEC 80079-34:2011 EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE
I.S. EN 14071:2015 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT
PREN 10028-3 : DRAFT 2014 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 3: WELDABLE FINE GRAIN STEELS, NORMALIZED
I.S. CR 12952-17:2002 WATER BOILERS AND AUXILIARY INSTALLATIONS - PART 17: GUIDELINE FOR THE INVOLVEMENT OF AN INSPECTION BODY INDEPENDENT OF THE MANUFACTURER
I.S. EN 10217-3:2002 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
I.S. EN 10223-8:2013 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS
I.S. EN 12449:2016 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES
I.S. EN 1090-3:2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
I.S. EN 13445-8:2014 UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS
I.S. EN 16124:2011 FOUNDING - LOW-ALLOYED FERRITIC SPHEROIDAL GRAPHITE CAST IRONS FOR ELEVATED TEMPERATURE APPLICATIONS
BS EN 10169 : 2010 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS
I.S. EN 15048-1:2016 NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS
I.S. EN 10217-5:2002 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
I.S. EN 13445-10:2015 UNFIRED PRESSURE VESSELS - PART 10: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF NICKEL AND NICKEL ALLOYS
I.S. EN 2311:2017 AEROSPACE SERIES - BUSHES WITH SELF-LUBRICATING LINER - TECHNICAL SPECIFICATION
I.S. EN 16617:2015 PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING
ISO/TS 35105:2018 Petroleum and natural gas industries Arctic operations Material requirements for arctic operations
PREN 17206 : DRAFT 2018 ENTERTAINMENT TECHNOLOGY - LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - SPECIFICATIONS FOR GENERAL REQUIREMENTS (EXCLUDING ALUMINUM AND STEEL TRUSSES AND TOWERS)
PREN 10257-2 : DRAFT 2008 ZINC OR ZINC ALLOY COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - PART 2: SUBMARINE CABLES
PREN 1852-1 : DRAFT 2016 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
PREN 10272 : DRAFT 2013 STAINLESS STEEL BARS FOR PRESSURE PURPOSES
EN 10253-2:2007 Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
PREN ISO 683-17 : DRAFT 2013 HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO/DIS 683-17:2013)
PREN 448 : DRAFT 2018 DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
DIN EN 12421:2015-12 (Draft) MAGNESIUM AND MAGNESIUM ALLOYS - UNALLOYED MAGNESIUM
DIN EN 15776:2016-01 Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 % (includes Amendment A1:2015)
BS EN ISO 3183 : 2012 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS
ISO 3183:2012 Petroleum and natural gas industries Steel pipe for pipeline transportation systems
EN 15129:2018 (edition 2) Anti-seismic devices
UNE-EN 15048-1:2018 Non-preloaded structural bolting assemblies - Part 1: General requirements
BS EN 15129:2009 Anti-seismic devices
BS EN 12449:2016 Copper and copper alloys. Seamless, round tubes for general purposes
17/30346741 DC : 0 BS EN 10225-1 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 1: PLATES
UNE-EN 14071:2015 LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment
UNI EN 15129 : 2009 ANTI-SEISMIC DEVICES
PREN 10217-3 : DRAFT 2009 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
ONORM EN 754-1 : 2008 ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
UNE-EN 1993-1-3:2012 Eurocode 3 - Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting
PREN 12080 : DRAFT 2015 RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS
DIN EN 10217-6:2005-04 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
PREN 10106 : DRAFT 2013 COLD ROLLED NON-ORIENTED ELECTRICAL STEEL SHEET AND STRIP DELIVERED IN THE FULLY PROCESSED STATE
BS EN ISO 28721-4:2015 Vitreous and porcelain enamels. Glass-lined apparatus for process plants Quality requirements for glass-lined flanged steel pipes and flanged steel fittings
PREN 1337-6 : DRAFT 2018 STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS
I.S. EN 15001-1:2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
UNI EN 16124 : 2012 FOUNDING - LOW-ALLOYED FERRITIC SPHEROIDAL GRAPHITE CAST IRONS FOR ELEVATED TEMPERATURE APPLICATIONS
UNE-EN 10088-4:2010 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
DIN EN 14399-9:2016-01 (Draft) HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES
BS EN 14071:2015 LPG equipment and accessories. Pressure relief valves for LPG pressure vessels. Ancillary equipment
BS EN 1090-2 : 2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
I.S. EN 50216-12:2011 POWER TRANSFORMER AND REACTOR FITTINGS - PART 12: FANS
DIN EN 1090-2:2015-07 (Draft) EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
BS EN 3275:2002 Aerospace series. Pipe coupling 8°30\' up to 28000 kPa. Dynamic beam seal. Metric series. Technical specification
EN 10217-1:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
BS EN 1329-1 : 2014 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
UNI EN 1090-2 : 2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
EN 10083-1:2006 Steels for quenching and tempering - Part 1: General technical delivery conditions
EN 14071:2015 LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment
ISO 6336-5:2016 Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials
DIN EN 12807:2016-09 (Draft) LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE BRAZED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION
IEC 61987-92:2018 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 92: Lists of properties (LOP) of measuring equipment for electronic data exchange - Aspect LOPs
EN 12164:2016 Copper and copper alloys - Rod for free machining purposes
I.S. EN 13110:2012 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION
IEC 62917:2016 Railway applications - Fixed installations - Electric traction - Copper and copper alloy grooved contact wires
I.S. EN 10270-1:2011+A1:2017 STEEL WIRE FOR MECHANICAL SPRINGS - PART 1: PATENTED COLD DRAWN UNALLOYED SPRING STEEL WIRE
UNE-EN 12952-6:2012 Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler
I.S. EN 14591-4:2007 EXPLOSION PREVENTION AND PROTECTION IN UNDERGROUND MINES - PROTECTIVE SYSTEMS - PART 4: AUTOMATIC EXTINGUISHING SYSTEMS FOR ROAD HEADERS
I.S. EN 50052:2016 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED CAST ALUMINIUM ALLOY ENCLOSURES
I.S. EN 14460:2018 EXPLOSION RESISTANT EQUIPMENT
I.S. EN 50149:2012 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - COPPER AND COPPER ALLOY GROOVED CONTACT WIRES
DIN EN 10216-5:2014-03 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
I.S. EN 10253-2:2007 BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
EN 1982:2017 Copper and copper alloys - Ingots and castings
S.R. CWA 15902-1:2009 LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - PART 1: GENERAL REQUIREMENTS (EXCLUDING ALUMINIUM AND STEEL TRUSSES AND TOWERS)
DIN EN 877:2010-01 Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance (includes Amendment A1:2006 and Corrigendum AC:2008)
EN 267:2009+A1:2011 Automatic forced draught burners for liquid fuels
EN 12168:2016 Copper and copper alloys - Hollow rod for free machining purposes
DIN EN 15085-4:2008-01 Railway applications - Welding of railway vehicles and components - Part 4: Production requirements
DIN EN 12252:2014-07 LPG equipment and accessories - Equipping of LPG road tankers
DIN EN 12438:2015-12 (Draft) MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOYS FOR CAST ANODES
DIN EN 12284:2004-01 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking
DIN EN 12699:2015-07 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DISPLACEMENT PILES
DIN EN 14879-5 E : 2007 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 5: LININGS ON CONCRETE COMPONENTS
DIN EN 755-1:2016-10 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
DIN EN 10297-1 E : 2003 SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES
DIN EN 12285-2:2005-05 WORKSHOP FABRICATED STEEL TANKS - PART 2: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE ABOVEGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS
DIN EN 10297-2 E : 2006 SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL
DIN EN 13796-1 E : 2006 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOW-HANGERS
DIN EN 13981-2:2004-10 Aluminium and aluminium alloys - Products for structural railway applications, Technical conditions for inspection and delivery - Part 2: Plates and sheets
I.S. EN 13121-1:2003 GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - SPECIFICATION CONDITIONS AND ACCEPTANCE CONDITIONS
DIN EN 1442:2008-04 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
DIN EN 13084-7:2013-03 FREE-STANDING CHIMNEYS - PART 7: PRODUCT SPECIFICATIONS OF CYLINDRICAL STEEL FABRICATIONS FOR USE IN SINGLE WALL STEEL CHIMNEYS AND STEEL LINERS
DIN EN 1993-1-3:2010-12 Eurocode 3: Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting (includes Corrigendum AC:2009)
DIN EN 13981-3:2006-12 Aluminium and aluminium alloys - Products for structural railway applications, Technical conditions for inspection and delivery - Part 3: Castings
DIN EN 14343 E : 2006 ROTARY POSITIVE DISPLACEMENT PUMPS - PERFORMANCE TESTS FOR ACCEPTANCE
UNI EN 3-8 : 2007 PORTABLE FIRE EXTINGUISHERS - PART 8: ADDITIONAL REQUIREMENTS TO EN 3-7 FOR THE CONSTRUCTION, RESISTANCE TO PRESSURE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR
DIN EN 1594:2013-12 Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements
DIN EN 1559-1:2011-05 Founding - Technical conditions of delivery - Part 1: General
DIN EN 508-3:2009-07 Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel
DIN EN 10305-4 E : 2016 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
DIN EN 10305-6:2016-08 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
DIN EN 15088 E : 2006 ALUMINIUM AND ALUMINIUM ALLOYS - STRUCTURAL PRODUCTS FOR CONSTRUCTION WORKS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
DIN EN 14396:2004-04 Fixed ladders for manholes
DIN EN 267:2012-03 (Draft) AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
DIN EN ISO 3452-3:2014-03 NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 3: REFERENCE TEST BLOCKS (ISO 3452-3:2013)
DIN EN 14199:2015-07 EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES
DIN EN 10302:2008-06 Creep resisting steels, nickel and cobalt alloys
DIN EN 12167:2015-12 (Draft) COPPER AND COPPER ALLOYS - PROFILES AND BARS FOR GENERAL PURPOSES
UNE-EN 10120:2018 Steel sheet and strip for welded gas cylinders
DIN EN 267:2011-11 Automatic forced draught burners for liquid fuels
DIN EN 12168:2015-12 (Draft) COPPER AND COPPER ALLOYS - HOLLOW ROD FOR FREE MACHINING PURPOSES
DIN EN 12080:2015-06 (Draft) RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS
DIN EN 14392 E : 2008 ALUMINIUM AND ALUMINIUM ALLOYS - REQUIREMENTS FOR ANODIZED PRODUCTS FOR USE IN CONTACT WITH FOODSTUFF
DIN EN 1715-1:2008-07 Aluminium and aluminium alloys - Drawing stock - Part 1: General requirements and technical conditions for inspection and delivery
DIN EN 303-5:2012-10 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
DIN EN 10269:2014-02 STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES
DIN EN 12165:2015-12 (Draft) COPPER AND COPPER ALLOYS - WROUGHT AND UNWROUGHT FORGING STOCK
DIN EN 14782:2015-09 (Draft) SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
DIN EN 1337-6:2004-08 Structural bearings - Part 6: Rocker bearings
DIN EN 1337-5:2005-07 Structural bearings - Part 5: Pot bearings
DIN EN 10297-1:2003-06 SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES
DIN EN 14424:2013-09 HOSE FITTINGS WITH SCREWED FERRULES
DIN EN 10216-2:2014-03 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
DIN EN 505:2013-06 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET
DIN EN 15049:2007-12 Railway applications - Suspension components - Torsion bar, steel
DIN EN 12163:2015-12 (Draft) COPPER AND COPPER ALLOYS - ROD FOR GENERAL PURPOSES
DIN EN 12164:2015-12 (Draft) COPPER AND COPPER ALLOYS - ROD FOR FREE MACHINING PURPOSES
DIN EN 10296-2 : 2007-06 WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL
DIN EN 14656:2010-10 Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals (includes Amendment A1:2010)
DIN EN 10297-2:2006-02 Seamless steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
DIN EN 10130 : 2007-04 COLD-ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
DIN EN 14343:2006-11 ROTARY POSITIVE DISPLACEMENT PUMPS - PERFORMANCE TESTS FOR ACCEPTANCE
UNE-EN 13575:2012 Static thermoplastic tanks for the above ground storage of chemicals — Blow moulded or rotationally moulded polyethylene tanks — Requirements and test methods
BS EN 12450:2012 Copper and copper alloys. Seamless, round copper capillary tubes
BS EN 10216-4:2013 Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified low temperature properties
UNE-EN 50216-12:2011 Power transformer and reactor fittings - Part 12: Fans
BS EN 10312:2002 Welded stainless steel tubes for the conveyance of aqueous liquids inclu ding water for human consumption. Technical delivery conditions
UNE-EN 12542:2011 LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture
BS EN 10242:1995 Threaded pipe fittings in malleable cast iron
UNE-EN 10305-3:2016 Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
BS EN 10335:2005 Steel for packaging. Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption. Non alloyed electrolytic chromium/chromium oxide coated steel
UNE-EN 10305-1:2016 Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes
BS EN 14532-1:2004 Welding consumables. Test methods and quality requirements Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys
UNE-EN 10305-5:2016 Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes
BS EN 10162:2003 Cold rolled steel sections. Technical delivery conditions. Dimensional and cross-sectional tolerances
BS EN 12163:2011 Copper and copper alloys. Rod for general purposes
UNE-EN 1977:2013 Copper and copper alloys - Copper drawing stock (wire rod)
BS EN 3727:2006 Aerospace series. Bearings, airframe rolling rigid with flanged alignment housing. Technical specification
BS EN 1758:1998 Copper and copper alloys. Strip for lead frames
BS EN 10155:1993 Structural steels with improved atmospheric corrosion resistance. Technical delivery conditions
BS EN 334 : 2005 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
DIN EN 10305-3:2016-08 Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
BS EN 10025:1993 Hot rolled products of non-alloy structural steels. Technical delivery conditions
UNE-EN 12186:2015 Gas infrastructure - Gas pressure regulating stations for transmission and distribution - Functional requirements
BS EN 253 : 2009 DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PIPE ASSEMBLY OF STEEL SERVICE PIPE, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
BS EN 15048-1:2007 Non-preloaded structural bolting assemblies General requirements
BS EN 10270-1 : 2011 STEEL WIRE FOR MECHANICAL SPRINGS - PART 1: PATENTED COLD DRAWN UNALLOYED SPRING STEEL WIRE
UNE-EN 13223:2015 Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment
BS EN 3-8:2006 Portable fire extinguishers Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar
BS EN 2311:2017 Aerospace series. Bushes with self-lubricating liner. Technical specification
UNI EN ISO 3452-3 : 2014 NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 3: REFERENCE TEST BLOCKS
BS EN 14782:2006 Self-supporting metal sheet for roofing, external cladding and internal lining. Product specification and requirements
UNE-EN 14141:2014 Valves for natural gas transportation in pipelines - Performance requirements and tests
BS EN 12080:2017 Railway applications. Axleboxes. Rolling bearings
BS EN 10215:1995 Continuously hot-dip aluminium-zinc (AZ) coated steel strip and sheet. Technical delivery conditions
BS EN 14673 : 2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
BS EN 13148:2010 Copper and copper alloys. Hot-dip tinned strip
BS EN 1337-5:2005 Structural bearings Pot bearings
UNE-EN 10139:2016 Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions
UNE-EN 10305-4:2016 Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
BS EN 1337-2:2004 Structural bearings Sliding elements
UNE-EN 12547:2015 Centrifuges - Common safety requirements
BS EN 14399-1:2015 High-strength structural bolting assemblies for preloading General requirements
I.S. EN 12542:2010 LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE
DIN EN 10270-2:2012-01 Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire
I.S. EN 764-5:2014 PRESSURE EQUIPMENT - PART 5: INSPECTION DOCUMENTATION OF METALLIC MATERIALS AND COMPLIANCE WITH THE MATERIAL SPECIFICATION
I.S. EN 12450:2012 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER CAPILLARY TUBES
I.S. EN 10305-5:2016 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES
I.S. EN 1386:2007 ALUMINIUM AND ALUMINIUM ALLOYS - TREAD PLATE - SPECIFICATIONS
I.S. EN 10216-1:2013 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
I.S. EN ISO 10380:2012 PIPEWORK - CORRUGATED METAL HOSES AND HOSE ASSEMBLIES (ISO 10380:2012)
I.S. EN 485-1:2016 ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
I.S. EN 13600:2013 COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES
I.S. EN 486:2009 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUSION INGOTS - SPECIFICATIONS
I.S. EN 10028-6:2017 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 6: WELDABLE FINE GRAIN STEELS, QUENCHED AND TEMPERED
I.S. EN 12385-1:2002 STEEL WIRE ROPES - SAFETY - PART 1: GENERAL REQUIREMENTS
I.S. EN 14656:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
DIN EN 1866:1998-11 MOBILE FIRE EXTINGUISHERS
I.S. EN ISO 13628-2:2006 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
I.S. EN 10223-3:2013 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES
I.S. EN 10273:2016 HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
I.S. EN 13774:2013 VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS
I.S. EN 10305-6:2016 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
I.S. EN 1594:2013 GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS
I.S. EN 10216-3:2013 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
I.S. EN 10245-2:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE
I.S. EN 12166:2016 COPPER AND COPPER ALLOYS - WIRE FOR GENERAL PURPOSES
I.S. EN 1092-3:2003 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES
I.S. EN 13796-1:2017 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOW-HANGERS
I.S. EN 12080:2017 RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS
DIN EN 1473:1997-11 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
I.S. EN 40-5:2002 LIGHTING COLUMNS - PART 5: REQUIREMENTS FOR STEEL LIGHTING COLUMNS
DIN EN 13148:2010-12 Copper and copper alloys - Hot-dip tinned strip
DIN EN 74-1:2005-12 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures
I.S. EN 10245-1:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
DIN EN 12450:2013-01 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER CAPILLARY TUBES
I.S. EN 570:2007 ALUMINIUM AND ALUMINIUM ALLOYS - IMPACT EXTRUSION SLUGS OBTAINED FROM WROUGHT PRODUCTS - SPECIFICATIONS
I.S. EN 2337:2006 AEROSPACE SERIES - SPHERICAL PLAIN BEARINGS - TECHNICAL SPECIFICATION
I.S. EN 10130:2006 COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
DIN EN 14420-1:2013-09 Hose fittings with clamp units - Part 1: Requirements, types of fixing and connection, designation and testing
DIN EN 10028-2:2017-10 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 2: NON-ALLOY AND ALLOY STEELS WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
I.S. EN 1301-1:2008 ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN WIRE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
EN 508-1:2014 Roofing and cladding products from metal sheet - Specification for self-supporting of steel, aluminium or stainless steel sheet - Part 1: Steel
I.S. EN 10257-1:2011 ZINC OR ZINC ALLOY COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - PART 1: LAND CABLES
I.S. EN 10152:2017 ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
DIN EN 10208-2:2009-07 STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
I.S. EN 1982:2017 COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS
I.S. EN 10223-2:2012 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 2: HEXAGONAL STEEL WIRE NETTING FOR AGRICULTURAL, INSULATION AND FENCING PURPOSES
DIN EN 12542:2010-12 LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE
DIN EN 12451:2012-08 Copper and copper alloys - Seamless, round tubes for heat exchangers
DIN EN 10028-1:2017-10 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
I.S. EN 10028-2:2017 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 2: NON-ALLOY AND ALLOY STEELS WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
I.S. EN 10296-2:2006 WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL
I.S. EN 12421:2017 MAGNESIUM AND MAGNESIUM ALLOYS - UNALLOYED MAGNESIUM
I.S. EN 10209:2013 COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING - TECHNICAL DELIVERY CONDITIONS
I.S. EN 10270-1:2011 STEEL WIRE FOR MECHANICAL SPRINGS - PART 1: PATENTED COLD DRAWN UNALLOYED SPRING STEEL WIRE
I.S. EN 10223-1:2012 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 1: ZINC AND ZINC-ALLOY COATED STEEL BARBED WIRE
I.S. EN 10216-5:2013 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES
I.S. EN 10088-2:2014 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
I.S. EN 10264-1:2012 STEEL WIRE AND WIRE PRODUCTS - STEEL WIRE FOR ROPES - PART 1: GENERAL REQUIREMENTS
DIN EN 1057:2010-06 Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications (includes Amendment A1:2010)
I.S. EN 10217-7:2014 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
I.S. EN 13852-1:2013 CRANES - OFFSHORE CRANES - PART 1: GENERAL - PURPOSE OFFSHORE CRANES
I.S. EN ISO 9934-2:2015 NON-DESTRUCTIVE TESTING - MAGNETIC PARTICLE TESTING - PART 2: DETECTION MEDIA (ISO 9934-2:2015)
I.S. EN 14129:2014 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS
I.S. EN 13599:2014 COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES
I.S. EN 12952-6:2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 6: INSPECTION DURING CONSTRUCTION; DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER
I.S. EN 505:2013 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET
I.S. EN ISO 3452-2:2013 NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 2: TESTING OF PENETRANT MATERIALS (ISO 3452-2:2013)
I.S. EN 12167:2016 COPPER AND COPPER ALLOYS - PROFILES AND BARS FOR GENERAL PURPOSES
I.S. EN 13782:2015 TEMPORARY STRUCTURES - TENTS - SAFETY
I.S. EN 13835:2012 FOUNDING - AUSTENITIC CAST IRONS
DIN EN 12420:1999-03 COPPER AND COPPER ALLOYS - FORGINGS
DIN EN 14585-1:2006-04 Corrugated metal hose assemblies for pressure applications - Part 1: Requirements
I.S. EN 13605:2013 COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES
I.S. EN 10245-4:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE
I.S. EN 12953-2:2012 SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
I.S. EN 10021:2006 GENERAL TECHNICAL DELIVERY CONDITIONS FOR STEEL PRODUCTS
I.S. EN 14783:2013 FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
I.S. EN 10303:2015 THIN MAGNETIC STEEL STRIP AND SHEET FOR USE AT MEDIUM FREQUENCIES
I.S. EN 607:2004 EAVES GUTTERS AND FITTINGS MADE OF PVC-U - DEFINITIONS, REQUIREMENTS AND TESTING
I.S. EN 10205:2016 COLD REDUCED TINMILL PRODUCTS - BLACKPLATE
DIN EN 10208-1:1998-02 STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
I.S. EN 1977:2013 COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD)
I.S. EN 1715-1:2008 ALUMINIUM AND ALUMINIUM ALLOYS - DRAWING STOCK - PART 1: GENERAL REQUIREMENTS AND TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
I.S. EN 14286:2008 ALUMINIUM AND ALUMINIUM ALLOYS - WELDABLE ROLLED PRODUCTS FOR TANKS FOR THE STORAGE AND TRANSPORTATION OF DANGEROUS GOODS
DIN EN 10210-1:2006-07 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
DIN EN 10169-3:2003-09 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 3: PRODUCTS FOR BUILDING INTERIOR APPLICATIONS
I.S. EN 12452:2012 COPPER AND COPPER ALLOYS - ROLLED, FINNED, SEAMLESS TUBES FOR HEAT EXCHANGERS
DIN EN 10213-1:1996-01 TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 1: GENERAL
DIN EN 10088-2:2014-12 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
I.S. EN 4560:2015 AEROSPACE SERIES - PIPE COUPLING 37 DEGREES, SPHERICAL, UP TO 21000 KPA - INCH SERIES - TECHNICAL SPECIFICATION
I.S. EN 12438:2017 MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOYS FOR CAST ANODES
DIN EN 12452:2012-08 COPPER AND COPPER ALLOYS - ROLLED, FINNED, SEAMLESS TUBES FOR HEAT EXCHANGERS
UNE-EN 10238:2011 Automatically blast-cleaned and automatically prefabrication primed structural steel products
DIN EN 10169-2:2006-07 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 2: PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS
DIN EN 13852-2:2005-03 Cranes - Offshore cranes - Part 2: Floating cranes
DIN EN 14420-7:2013-09 Hose fittings with clamp units - Part 7: Cam locking couplings
I.S. EN 13942:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES
I.S. EN 12168:2016 COPPER AND COPPER ALLOYS - HOLLOW ROD FOR FREE MACHINING PURPOSES
DIN EN 13796-1:2006-01 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOW-HANGERS
DIN ISO 9044:2017-11 INDUSTRIAL WOVEN WIRE CLOTH - TECHNICAL REQUIREMENTS AND TESTS (ISO 9044:2016)
I.S. EN ISO 3452-3:2013 NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 3: REFERENCE TEST BLOCKS (ISO 3452-3:2013)
I.S. EN 14140:2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
I.S. EN 13195-1:2002 ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODU- PART 1: SPECIFICATIONS (SHIPBUILDING, MARINE AND OFFSHORE)
I.S. EN 13480-4:2017 METALLIC INDUSTRIAL PIPING - PART 4: FABRICATION AND INSTALLATION
I.S. EN 541:2006 ALUMINIUM AND ALUMINIUM ALLOYS - ROLLED PRODUCTS FOR CANS, CLOSURES AND LIDS - SPECIFICATIONS
I.S. EN 1559-1:2011 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
I.S. EN 1976:2012 COPPER AND COPPER ALLOYS - CAST UNWROUGHT COPPER PRODUCTS
I.S. EN 12732:2013 GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS
I.S. EN 1442:2017 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
I.S. EN ISO 14723:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - SUBSEA PIPELINE VALVES
I.S. EN 10270-2:2011 STEEL WIRE FOR MECHANICAL SPRINGS - PART 2: OIL HARDENED AND TEMPERED SPRING STEEL WIRE
I.S. EN 10270-3:2011 STEEL WIRE FOR MECHANICAL SPRINGS - PART 3: STAINLESS SPRING STEEL WIRE
I.S. EN 13223:2015 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - DRIVE SYSTEMS AND OTHER MECHANICAL EQUIPMENT
I.S. EN 508-3:2008 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELFSUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 3: STAINLESS STEEL
I.S. EN 13084-7:2012 FREE-STANDING CHIMNEYS - PART 7: PRODUCT SPECIFICATIONS OF CYLINDRICAL STEEL FABRICATIONS FOR USE IN SINGLE WALL STEEL CHIMNEYS AND STEEL LINERS
I.S. EN 10028-3:2017 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 3: WELDABLE FINE GRAIN STEELS, NORMALIZED
I.S. EN 602:2004 ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS - CHEMICAL COMPOSITION OF SEMI-FINISHED PRODUCTS USED FOR THE FABRICATION OF ARTICLES FOR USE IN CONTACT WITH FOODSTUFF
I.S. EN 10149-1:2013 HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
DIN EN 10169-1:2004-04 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS)
I.S. EN 508-1:2014 ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL
I.S. EN 10269:2013 STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES
DIN EN 13110:2017-05 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION
I.S. EN 1263-1:2014 TEMPORARY WORKS EQUIPMENT - SAFETY NETS - PART 1: SAFETY REQUIREMENTS, TEST METHODS
I.S. EN 13602:2013 COPPER AND COPPER ALLOYS - DRAWN, ROUND COPPER WIRE FOR THE MANUFACTURE OF ELECTRICAL CONDUCTORS
I.S. EN 12020-1:2008 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
I.S. EN 12952-2:2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
I.S. EN 13348:2016 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR MEDICAL GASES OR VACUUM
I.S. EN 10219-1:2006 COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS
DIN EN 12252:2000-10 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
I.S. EN 10083-2:2006 STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS
I.S. EN 12186:2014 GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS
I.S. EN 10223-4:2012 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 4: STEEL WIRE WELDED MESH FENCING
I.S. EN 10028-4:2017 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 4: NICKEL ALLOY STEELS WITH SPECIFIED LOW TEMPERATURE PROPERTIES
I.S. EN 10272:2016&LC:2016 STAINLESS STEEL BARS FOR PRESSURE PURPOSES
I.S. EN 14141:2013 VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS
I.S. EN 13604:2013 COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER
I.S. EN 12392:2016 ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT
I.S. EN 1561:2011 FOUNDING - GREY CAST IRONS
I.S. EN 1473:2016 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
EN 50216-12:2011 Power transformer and reactor fittings - Part 12: Fans
DIN EN 13349:2002-11 Copper and copper alloys - Pre-insulated copper tubes with solid covering; German version EN 13349:2002
I.S. EN 502:2013 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET
I.S. EN 10257-2:2011 ZINC OR ZINC ALLOY COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - PART 2: SUBMARINE CABLES
DIN EN 10028-4:2017-10 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 4: NICKEL ALLOY STEELS WITH SPECIFIED LOW TEMPERATURE PROPERTIES
I.S. EN 13480-8:2017&LC:2019 METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING
I.S. EN 14893:2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
I.S. EN 1337-2:2004 STRUCTURAL BEARINGS - PART 2: SLIDING ELEMENTS
I.S. EN 10088-3:2014 STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
DIN EN 1453-1:2017-09 PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES AND THE SYSTEM
I.S. EN 13941:2009 DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING
DIN EN 10028-3:2017-10 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 3: WELDABLE FINE GRAIN STEELS, NORMALIZED
I.S. EN 303-1:2017 HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING
I.S. EN 303-5:2012 HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
I.S. EN 12252:2014 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
I.S. EN 12451:2012 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS
I.S. EN 12952-5:2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER
I.S. EN 10305-4:2016 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
I.S. EN 14394:2006 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
I.S. EN 10268:2006 COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
I.S. EN 12547:2014 CENTRIFUGES - COMMON SAFETY REQUIREMENTS
I.S. EN 10210-1:2006 HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS
I.S. EN 10028-5:2017 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 5: WELDABLE FINE GRAIN STEELS, THERMOMECHANICALLY ROLLED
I.S. EN 10305-1:2016 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES
I.S. EN 1453-1:2017 PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1 - SPECIFICATIONS FOR PIPES AND THE SYSTEM
NF EN 14276-1 : 2006 + A1 2011 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
I.S. EN ISO 21809-2:2014 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 2: SINGLE LAYER FUSION-BONDED EPOXY COATINGS (ISO 21809-2:2014)
I.S. EN ISO 683-17:2014 HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO 683-17:2014)
I.S. EN 14673:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
DIN EN 10088-3:2014-12 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
I.S. EN 10238:2009 AUTOMATICALLY BLAST-CLEANED AND AUTOMATICALLY PREFABRICATION PRIMED STRUCTURAL STEEL PRODUCTS
I.S. EN 10305-3:2016 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDED COLD SIZED TUBES
DIN EN 10083-3:2007-01 STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
DIN EN 1977:2013-04 COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD)
I.S. EN 13802:2013 RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS
I.S. EN 12165:2016 COPPER AND COPPER ALLOYS - WROUGHT AND UNWROUGHT FORGING STOCK
I.S. EN 12164:2016 COPPER AND COPPER ALLOYS - ROD FOR FREE MACHINING PURPOSES
I.S. EN ISO 1461:2009 HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS
DIN EN 12080:2017-11 Railway applications - Axleboxes - Rolling bearings
I.S. EN 764-4:2014 PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS
I.S. EN 10245-3:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE
DIN EN 10025-1:2005-02 Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version EN 10025-1:2004
I.S. EN 10028-1:2017 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
I.S. EN 13575:2012 STATIC THERMOPLASTIC TANKS FOR THE ABOVE GROUND STORAGE OF CHEMICALS - BLOW MOULDED OR ROTATIONALLY MOULDED POLYETHYLENE TANKS - REQUIREMENTS AND TEST METHODS
I.S. EN 10277-1:2008 BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL
I.S. EN 14420-7:2013 HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS
DIN EN 10277-1:2008-06 BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL
I.S. EN 487:2009 ALUMINIUM AND ALUMINIUM ALLOYS - ROLLING INGOTS - SPECIFICATIONS
I.S. EN 1564:2011 FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRONS
I.S. EN 12735-2:2016 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR AIR CONDITIONING AND REFRIGERATION - PART 2: TUBES FOR EQUIPMENT
I.S. EN 12420:2014 COPPER AND COPPER ALLOYS - FORGINGS
I.S. EN 14199:2015 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - MICROPILES
I.S. EN 10255:2004 NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS
I.S. EN 14359:2017 GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
I.S. EN 10111:2008 CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
I.S. EN 755-1:2016 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
I.S. EN 14399-1:2015 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS
I.S. EN 12163:2016 COPPER AND COPPER ALLOYS - ROD FOR GENERAL PURPOSES
I.S. EN 506:2008 ROOFING PRODUCTS OF METAL SHEET - SPECIFICATION FOR SELFSUPPORTING PRODUCTS OF COPPER OR ZINC SHEET
I.S. EN 10107:2014 GRAIN-ORIENTED ELECTRICAL STEEL STRIP AND SHEET DELIVERED IN THE FULLY PROCESSED STATE
I.S. EN 12007-3:2015 GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNCTIONAL REQUIREMENTS FOR STEEL
DIN EN 12732:2000-09 GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS
I.S. EN 10302:2008 CREEP RESISTING STEELS, NICKEL AND COBALT ALLOYS
I.S. EN 14420-1:2013 HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, TYPES OF FIXING AND CONNECTION, DESIGNATION AND TESTING
NF EN 14276-2 : 2007 + A1 2011 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
DIN EN 1274:2005-02 THERMAL SPRAYING - POWDERS - COMPOSITION, TECHNICAL SUPPLY CONDITIONS
UNI EN 12493 : 2014 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
UNI EN 10111 : 2008 CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
UNI EN 502 : 2013 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET
UNI EN ISO 15589-2 : 2014 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES
UNI EN 14286 : 2008 ALUMINIUM AND ALUMINIUM ALLOYS - WELDABLE ROLLED PRODUCTS FOR TANKS FOR THE STORAGE AND TRANSPORTATION OF DANGEROUS GOODS
KTA 3407 : 2014 PIPE PENETRATIONS THROUGH THE REACTOR CONTAINMENT VESSEL
KTA 3702 : 2014(R2017) EMERGENCY POWER GENERATING FACILITIES WITH DIESEL-GENERATOR UNITS IN NUCLEAR POWER PLANTS
NF EN 12952-2 : 2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
VDI 2083 Blatt 13.3:2010-10 Cleanroom technology - Quality, production, and distribution of ultrapure water - Pharmacy and other life-science applications
VDI 3405 Blatt 2.3:2017-07 (Draft) Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Characterisation of powder raw material
VDI 4411:2009-03 (Draft) Brake devices for cranes
KTA 3504 : 2015(R2017)
NF EN 13835 : 2012 FOUNDING - AUSTENITIC CAST IRONS
VDI 2248 Blatt 2:2017-01 (Draft) Product development using shape memory alloys - Material selection and nomenclature
VDI 2083 Blatt 13.2:2009-01 Cleanroom technology - Quality, production and distribution of ultrapure water - Microelectronics and other technical applications
VDI 2083 Blatt 13.1:2009-01 Cleanroom technology - Quality, production and distribution of ultrapure water - Fundamentals
BS 3100:1991 Specification for steel castings for general engineering purposes
VDI 3405 Blatt 2:2013-08 Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing
07/30164802 DC : 0 BS EN 10346 - CONTINUOUSLY HOT-DIP COATED STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS
UNE-EN 16482:2014 Founding - Continuous cast iron bars
DIN EN 1563:2015-07 (Draft) FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS
I.S. EN 3840:2007 AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION
96/104019 DC : DRAFT MAY 1996 PREN 503 - ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF LEAD SHEET
PREN 10305-5 : DRAFT 2015 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES
DIN 28120:2004-06 Circular sight glasses with case in main power connection
11/30218155 DC : 0 BS EN ISO 10380 - PIPEWORK - CORRUGATED METAL HOSES AND HOSE ASSEMBLIES
ISO 9044:2016 Industrial woven wire cloth Technical requirements and tests
I.S. EN 15129:2009 ANTI-SEISMIC DEVICES
08/30189601 DC : 0 BS EN 10223-1 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 1: ZINC AND ZINC-ALLOY COATED STEEL BARBED WIRE
13/30281974 DC : 0 BS EN 16617 - PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING
05/30134146 DC : DRAFT MAY 2005 EN 14591-4 - EXPLOSION PREVENTION AND PROTECTION IN UNDERGROUND MINES - PROTECTIVE SYSTEMS - PART 4: AUTOMATIC EXTINGUISHING SYSTEMS FOR ROAD HEADERS
17/30364387 DC : 0 BS EN 50069 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS
BS EN 16079:2011 Founding. Compacted (vermicular) graphite cast irons
PREN 1594 : DRAFT 2013 GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS
02/703879 DC : 0 PREN 14392 - ALUMINIUM AND ALUMINIUM ALLOYS - SPECIAL REQUIREMENTS FOR ANODISED PRODUCTS FOR USE IN CONTACT WITH FOOD
I.S. EN ISO 13628-5:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 5: SUBSEA UMBILICALS
UNI EN ISO 21809-5 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS
05/30042957 DC : DRAFT JAN 2005 EN 15047 - TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE SEAMLESS STEEL CYLINDERS FOR PORTABLE FIRE EXTINGUISHERS AND BOTTLES FOR BREATHING APPARATUS OF WATER CAPACITIES FROM 0,5 LITRE UP TO 15 LITRES
DIN EN 10169:2012-06 Continuously organic coated (coil coated) steel flat products - Technical delivery conditions (includes Amendment A1:2012)
16/30332608 DC : DRAFT JAN 2016 BS EN 10210-2 - HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS
12/30259888 DC : 0 BS EN ISO 3452-3 - NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 3: REFERENCE TEST BLOCKS
I.S. EN 10169-1:2004 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS)
13/30281192 DC : 0 BS EN ISO 9934-2 - NON-DESTRUCTIVE TESTING - MAGNETIC PARTICLE TESTING - PART 2: DETECTION MEDIA
02/712507 DC : DRAFT OCT 2002 EN 14585 - PRESSURISED CORRUGATED METAL HOSE ASSEMBLIES
I.S. EN 10326:2004 CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS
12/30264367 DC : 0 BS EN 505 - ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET
DIN 30674-3:2001-03 SHEATHING DUCTILE CAST IRON PIPES - PART 3: ZINC COATING WITH PROTECTIVE SHEATHING
12/30260023 DC : 0 BS EN 13480-8 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOYS
BS EN 15689:2009 Railway applications. Track. Switches and crossings. Crossing components made of cast austenitic manganese steel
04/30123271 DC : DRAFT OCT 2004 EN 10340 - STEEL CASTINGS FOR STRUCTURAL USES
I.S. EN ISO 16228:2018 FASTENERS - TYPES OF INSPECTION DOCUMENTS (ISO 16228:2017)
PREN 14620-2 : DRAFT 2003 DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED STEEL TANKS FOR THE STORAGE OF REFRIGERATED, LIQUEFIED GASES WITH OPERATING TEMPERATURES BETWEEN -5 DEGREE C AND -165 DEGREE C - PART 2: METALLIC COMPONENTS
05/30133060 DC : 0 EN 1090-3 - EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES
UNI EN 12693 : 2008 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
DIN EN ISO 28721-4 E : 2016 VITREOUS AND PORCELAIN ENAMELS - GLASSLINED APPARATUS FOR PROCESS PLANTS - PART 4: QUALITY REQUIREMENTS FOR GLASSLINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS (ISO 28721-4:2015)
CEI EN 50052 : 1998 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED CAST ALUMINIUM ALLOY ENCLOSURES
16/30319008 DC : 0 BS EN 12285-3 - WORKSHOP FABRICATED STEEL TANKS - PART 3: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS FOR HEATING AND COOLING OF BUILDINGS
DIN EN 16820:2015-03 (Draft) RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING
BS EN 12493 : 2013 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
I.S. EN 61400-4:2013 WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES (IEC 61400-4:2012 (EQV))
06/30136187 DC : 0 EN 755-1 - ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
BS 410-2:2000 Test sieves. Technical requirements and testing Test sieves of perforated metal plate
PREN 1473 : DRAFT 2018 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
08/30187567 DC : 0 BS EN 10028-6 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 6: WELDABLE FINE GRAIN STEELS, QUENCHED AND TEMPERED
07/30168407 DC : DRAFT DEC 2007 BS EN 508-2 - ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM
UNE-EN 50149:2012 Railway applications - Fixed installations - Electric traction - Copper and copper alloy grooved contact wires
11/30235499 DC : 0 BS EN ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS
04/30118524 DC : DRAFT AUG 2004 EN 1057 - COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR WATER AND GAS IN SANITARY AND HEATING APPLICATIONS
13/30286664 DC : 0 BS EN 10139 - COLD ROLLED UNCOATED MILD STEEL NARROW STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
12/30259070 DC : 0 BS EN 764-4 - PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS
DIN EN 10346:2015-10 Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions
18/30347939 DC : DRAFT APR 2018 BS ISO 20766-6 - ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEMS COMPONENTS - PART 6: PRESSURE RELIEF VALVES (PRV)
DIN EN 10205:1992-01 COLD REDUCED TIN-MILL PRODUCTS - BLACKPLATE
08/30176073 DC : DRAFT APR 2008 BS EN 15776 - UNFIRED PRESSURE VESSELS - ADDITIONAL REQUIREMENTS FOR THE DE SIGN AND FABRICATION OF PRESSURE VESSELS AND PARTS CONSTRUCTED FROM CAST IRON WITH ELONGATION EQUAL OR LESS THAN 15 PERCENT
12/30261889 DC : 0 BS EN 12420 - COPPER AND COPPER ALLOYS - FORGINGS
08/30180847 DC : DRAFT JUNE 2008 BS EN 10245-5 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
12/30264373 DC : 0 BS EN 502 - ROOFING PRODUCTS FORM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET
12/30264370 DC : 0 BS EN 14783 - FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
14/30285008 DC : 0 BS ISO 3310-1 - TEST SIEVES - TECHNICAL REQUIREMENTS AND TESTING - PART 1: TEST SIEVES OF METAL WIRE CLOTH
13/30258750 DC : 0 BS EN 12007-3 - GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNCTIONAL REQUIREMENTS FOR STEEL
UNE-EN 10338:2016 Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions
BS ISO 15589-2 : 2012 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES
08/30180502 DC : DRAFT JUNE 2008 BS EN 12542 - LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE
09/30201490 DC : 0 BS EN 10305-2 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES
DIN EN 1866:2006-03 MOBILE FIRE EXTINGUISHERS
BS ISO 13463:1999 Nuclear-grade plutonium dioxide powder for fabrication of light water reactor MOX fuel. Guidelines to help in the definition of a product specification
13/30266592 DC : 0 BS EN 12493 - LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
I.S. EN 15566:2016 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING
09/30207511 DC : 0 BS EN 10217-4 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
15/30325003 DC : 0 BS EN 10305-2 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES
13/30284484 DC : 0 BS CISPR 14-1 ED 6 - REQUIREMENTS FOR HOUSEHOLD APPLIANCES, ELECTRIC TOOLS AND SIMILAR APPARATUS - PART 1: EMISSION
PREN 14782 : DRAFT 2015 SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
DIN EN 1090-5 E : 2017 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
UNI EN 10088-5 : 2009 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and cold-formed products of corrosion-resistant steel for use in construction
DIN EN 10357 E : 2014 AUSTENITIC, AUSTENITIC-FERRITIC AND FERRITIC LONGITUDINALLY WELDED STAINLESS STEEL TUBES FOR THE FOOD AND CHEMICAL INDUSTRY
PREN 12421 : DRAFT 2015 MAGNESIUM AND MAGNESIUM ALLOYS - UNALLOYED MAGNESIUM
DIN EN 10294-2 E : 2012 HOLLOW BARS FOR MACHINING - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEELS WITH SPECIFIED MACHINABILITY PROPERTIES
PREN 50069 : DRAFT 2017 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS
15/30280562 DC : 0 BS EN ISO 16228 - FASTENERS - INSPECTION DOCUMENTS
03/306712 DC : DRAFT APR 2003 EN 1274 - THERMAL SPRAYING - POWDERS - COMPOSITION - TECHNICAL SUPPLY CONDITIONS
09/30172965 DC : 0 BS EN ISO 13628-15 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS
14/30295082 DC : 0 BS ISO 683-3 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 3: CASE HARDENING STEELS
S.R. CEN/TS 14541:2013 PLASTICS PIPES AND FITTINGS - CHARACTERISTICS FOR UTILISATION OF NON-VIRGIN PVC-U, PP AND PE MATERIALS
06/30144982 DC : 0 EN 1301-1 - ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN WIRE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
17/30356163 DC : 0 BS EN 4859 - AEROSPACE SERIES - SENSOR BASED CLAMP LOAD DETERMINATION/HIGH TENSILE BOLTS - TECHNICAL SPECIFICATION
PD CEN/TS 14541:2013 Plastics pipes and fittings. Characteristics for utilisation of non-virgin PVC-U, PP and PE materials
DIN EN 10253-4:2008-06 BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
02/710860 DC : DRAFT SEP 2002 BS EN 14532-3 - WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 3: CONFORMITY ASSESSMENT OF WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINIUM ALLOYS
I.S. EN 10083-1:2006 STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
13/30288198 DC : 0 BS EN 10106 - COLD ROLLED NON-ORIENTED ELECTRICAL STEEL SHEET AND STRIP DELIVERED IN THE FULLY PROCESSED STATE
15/30269176 DC : 0 BS ISO 6336-5 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 5: STRENGTH AND QUALITY OF MATERIALS
08/30184300 DC : DRAFT SEP 2008 BS EN 12952-2 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
12/30257298 DC : 0 BS EN 676 - FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
11/30254171 DC : 0 BS EN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
13/30247837 DC : 0 BS EN 13094 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION
PREN 754-1 : DRAFT 2015 ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
BS EN 10346:2015 Continuously hot-dip coated steel flat products for cold forming. Technical delivery conditions
00/714962 DC : DRAFT OCT 2000 PREN 12516-1 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOF STEEL VALVE SHELLS
14/30312179 DC : 0 BS EN 10028-2 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 2: NON-ALLOY AND ALLOY STEELS WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
PREN 10209 : DRAFT 2010 COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING - TECHNICAL DELIVERY CONDITIONS
UNI EN 10216-5 : 2014 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES
98/711668 DC : DRAFT AUG 98 PREN 10301 - STEEL TUBES AND FITTINGS FOR ON AND OFFSHORE PIPELINES - INTERNAL COATING FOR THE REDUCTION OF FRICTION FOR CONVEYANCE OF NON CORROSIVE GAS
UNI EN 303-5 : 2012 HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
14/30312176 DC : 0 BS EN 10120 - STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS
EN 1473:2016 Installation and equipment for liquefied natural gas - Design of onshore installations
00/707659 DC : DRAFT APR 2000 PREN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES
BS EN 50149:2012 Railway applications. Fixed installations. Electric traction. Copper and copper alloy grooved contact wires
PREN 1562 : DRAFT 2009 FOUNDING - MALLEABLE CAST IRONS
12/30250634 DC : 0 BS EN 13802 - RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS
13/30288572 DC : 0 BS EN 10272 - STAINLESS STEEL BARS FOR PRESSURE PURPOSES
09/30167487 DC : 2009 BS ISO 21457 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - MATERIALS SELECTION AND CORROSION CONTROL FOR OIL AND GAS PRODUCTION SYSTEMS
DD CEN/TS 45545-7:2009 Railway applications. Fire protection on railway vehicles Fire safety requirements for flammable liquid and flammable gas installations
UNE-EN 10346:2015 Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions
07/30168488 DC : 0 BS EN 253 - DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PIPE ASSEMBLY OF STEEL SERVICE PIPE, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
13/30291774 DC : 0 BS EN 378-2 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
12/30267860 DC : 0 BS EN 16482 - FOUNDING - CONTINUOUS CAST IRON BARS
DIN 2445-1:2000-09 SEAMLESS STEEL TUBES FOR DYNAMIC LOADS - PART 1: HOT FINISHED TUBES IN FLUID SYSTEMS, 100 TO 500 BAR
12/30260955 DC : 0 BS EN 13796-1 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOW-HANGERS
02/105261 DC : 0 BS EN 1337-8 - STRUCTURAL BEARINGS - GUIDED BEARINGS AND RESTRAINED BEARINGS
I.S. EN 1563:2011 FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS
12/30266856 DC : 0 BS EN 1866-3 - MOBILE FIRE EXTINGUISHERS - PART 3: REQUIREMENTS FOR THE ASSEMBLY, CONSTRUCTION AND PRESSURE RESISTANCE OF CO[2] EXTINGUISHERS WHICH COMPLY WITH THE REQUIREMENTS OF EN 1866-1
11/30239473 DC : 0 BS EN 10025-1 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
99/701054 DC : DRAFT JAN 1999 PREN 10089 - HOT-ROLLED STEELS FOR QUENCHED AND TEMPERED SPRINGS - TECHNICAL DELIVERY CONDITIONS
12/30258099 DC BS EN 267. Forced draught burners for liquid fuels
03/111296 DC : DRAFT AUG 2003 EN 10247 - MICROGRAPHIC EXAMINATION OF THE NON-METALLIC INCLUSION CONTENT OF STEELS USING STANDARD PICTURES
07/30165594 DC : DRAFT AUG 2007 BS EN 12493 - LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL TANKS FOR LIQUEFIED PETROLEUM GAS (LPG) - ROAD TANKERS DESIGN AND MANUFACTURE
BS EN 74-2:2008 Couplers, spigot pins and baseplates for use in falsework and scaffolds Special couplers. Requirements and test procedures
13/30288575 DC : 0 BS EN 10273 - HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
BS EN 1337-8:2007 Structural bearings Guide bearings and restraint bearings
09/30207514 DC : 0 BS EN 10217-5 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
12/30248681 DC : 0 BS EN 14140 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
API 6DSS : 2017-08 SPECIFICATION FOR SUBSEA PIPELINE VALVES
I.S. EN 61987-13:2016 INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 13: LISTS OF PROPERTIES (LOP) FOR PRESSURE MEASURING EQUIPMENT FOR ELECTRONIC DATA EXCHANGE
10/30216699 DC : 0 BS EN 45545-7 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 7: FIRE SAFETY REQUIREMENTS FOR FLAMMABLE LIQUID AND FLAMMABLE GAS INSTALLATIONS
EN 13001-3-5:2016 Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks
16/30342040 DC : 0 BS EN 13941-2 - DISTRICT HEATING PIPES - DESIGN AND INSTALLATION OF THERMAL INSULATED BONDED SINGLE AND TWIN PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PART 2: INSTALLATION
15/30324460 DC : 0 BS EN 754-1 - ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
07/30161864 DC : 0 BS EN 12807 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE BRAZED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION
01/715451 DC : DRAFT NOV 2001 PREN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL AND CONSTRUCTION PURPOSES
10/30234607 DC : 0 BS EN 14422 - CLAMP TYPE COUPLING ASSEMBLIES FOR LPG TRANSFER HOSES
07/30144991 DC : 0 BS EN 13957 - ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROUND, COILED TUBE FOR GENERAL APPLICATIONS - SPECIFICATION
08/30167676 DC : DRAFT JAN 2008 BS EN 10120 - STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS
13/30279826 DC : 0 BS EN 15551 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
05/30132920 DC : DRAFT APR 2005 EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR THE EXECUTION OF STEEL STRUCTURES
DIN EN ISO 14232-1 E : 2017 THERMAL SPRAYING - POWDERS - PART 1: CHARACTERIZATION AND TECHNICAL SUPPLY CONDITIONS (ISO 14232-1:2017)
NF EN 15001-1 : 2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
03/321262 DC : DRAFT DEC 2003 PREN 14866 - REGENERATIVE, PACKED ENAMELLED HEAT EXCHANGERS FOR AIR-GAS AND GAS-GAS HEATERS - SPECIFICATION
BS EN 2755:2009 Aerospace series. Bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Elevated load at ambient temperature. Technical specification
10/30216306 DC : 0 BS ISO 12490 - PETROLEUM AND NATURAL GAS INDUSTRIES - ACTUATION MECHANICAL INTEGRITY AND SIZING FOR PIPELINE VALVES
DIN 4099-1:2003-08 WELDING OF REINFORCING STEEL - PART 1: EXECUTION
BS EN 50183:2000 Conductors for overhead lines. Aluminium-magnesium-silicon alloy wires
07/30166946 DC : DRAFT AUG 2007 BS EN 15711 - VITREOUS AND PORCELAIN ENAMELS - GLASS LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS - QUALITY REQUIREMENTS
BS EN 14509:2013 Self-supporting double skin metal faced insulating panels. Factory made products. Specifications
15/30324997 DC : 0 BS EN 10305-4 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
09/30207521 DC : 0 BS EN 10217-7 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
10/30228886 DC : 0 BS EN 303-5 - CENTRAL-HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, HAND AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
DIN 17456:1999-02 SEAMLESS CIRCULAR STAINLESS STEEL TUBES WITH GENERAL QUALITY REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS
UNE-EN 14653-1:2012 Manually operated hydraulic shoring systems for groundwork support - Part 1: Product specifications
04/30118252 DC : DRAFT AUG 2004 EN 14917 - METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
PREN 10222-1 : DRAFT 2012 STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
08/30187526 DC : 0 BS EN 14121 - ALUMINIUM AND ALUMINIUM ALLOYS - ALUMINIUM SHEET, STRIP AND PLATE FOR ELECTROTECHNICAL APPLICATIONS
PREN 12451 : DRAFT 2010 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS
PREN 13941 : DRAFT 2009 DESIGN AND INSTALLATION OF REINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING
BS EN 10357:2013 Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
PREN 10107 : DRAFT 2012 GRAIN-ORIENTED ELECTRICAL STEEL STRIP AND SHEET DELIVERED IN THE FULLY PROCESSED STATE
PREN 1453-1 : DRAFT 2014 PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES AND THE SYSTEM
PREN 10305-6 : DRAFT 2015 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
14/30260020 DC : 0 BS EN 12285-1 - WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS
08/30180835 DC : DRAFT JUNE 2008 BS EN 10245-1 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
PREN 3-8 : DRAFT 2015 PORTABLE FIRE EXTINGUISHERS - PART 8: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 3-7
BS EN ISO 16120-1:2017 Non-alloy steel wire rod for conversion to wire General requirements
02/713626 DC : DRAFT NOV 2002 PREN 10021 - GENERAL TECHNICAL DELIVERY REQUIREMENTS FOR STEEL PRODUCTS
00/715206 DC : DRAFT OCT 2000 PREN 14015-1 - SPECIFICATION FOR THE DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED, ABOVE GROUND, WELDED, METALLIC TANKS FOR THE STORAGE OF LIQUIDS AT AMBIENT TEMPERATURE AND ABOVE - PART 1: STEEL TANKS
08/30180838 DC : DRAFT JUNE 2008 BS EN 10245-2 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE
PREN 3077 : 200P1 AEROSPACE SERIES - CLAMPS WORM DRIVE - TECHNICAL SPECIFICATION
10/30231999 DC : 0 BS EN ISO 28763 - VITREOUS AND PORCELAIN ENAMELS - REGENERATIVE, ENAMELLED AND PACKED PANELS FOR AIR-GAS AND GAS-GAS HEAT EXCHANGERS - SPECIFICATIONS
05/30132603 DC : DRAFT APR 2005 EN 10083-3 - STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
05/30126202 DC : 0 EN 10088-4 - STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
I.S. EN 10085:2001 NITRIDING STEELS - TECHNICAL DELIVERY CONDITIONS
11/30240456 DC : 0 BS EN 13601 - COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES
BS EN 10083-3 : 2006-08 STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
PREN 12285-1 : DRAFT 2016 WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS OTHER THAN FOR HEATING AND COOLING OF BUILDINGS
DIN EN 14917 E : 2012 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
PREN 507 : DRAFT 2017 ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED PRODUCTS OF ALUMINIUM SHEET
UNI EN 10253-4 : 2009 BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
PREN 4814 : DRAFT 2015 AEROSPACE SERIES - FLANGE COUPLINGS UP TO 21000 KPA - TECHNICAL SPECIFICATION - INCH SERIES
UNE-EN 1090-2:2011 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
PREN 4854-3 : 200P1 AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS - PART 3: TECHNICAL SPECIFICATION
API 2SF : 2013 MANUFACTURE OF STRUCTURAL STEEL FORGINGS FOR PRIMARY OFFSHORE APPLICATIONS
17/30347025 DC : 0 BS EN 15129 - ANTI-SEISMIC DEVICES
PREN 3624 : 200P1 AEROSPACE SERIES - POLYSULPHIDE SEALANTS, TWO-COMPONENT - TECHNICAL SPECIFICATION
15/30322070 DC : 0 BS EN 1563 - FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS
API 17E REDLINE : 2010 SPECIFICATION FOR SUBSEA UMBILICALS
API SPEC 17K : 2017 SPECIFICATION FOR BONDED FLEXIBLE PIPE
I.S. EN 16031:2012 ADJUSTABLE TELESCOPIC ALUMINIUM PROPS - PRODUCT SPECIFICATIONS, DESIGN AND ASSESSMENT BY CALCULATION AND TESTS
I.S. EN 4691-1:2017 AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION
UNI EN 12807 : 2009 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE BRAZED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION
I.S. EN 10357:2013 AUSTENITIC, AUSTENITIC-FERRITIC AND FERRITIC LONGITUDINALLY WELDED STAINLESS STEEL TUBES FOR THE FOOD AND CHEMICAL INDUSTRY
PREN 10210-2 : DRAFT 2016 HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS
XP CEN/TS 45545-7 : 2009 XP RAILWAY APPLICATIONS - FIRE PROTECTION OF RAILWAY VEHICLES - PART 7: FIRE SAFETY REQUIREMENTS FOR FLAMMABLE LIQUID AND FLAMMABLE GAS INSTALLATIONS
BS EN 12807:2009 LPG equipment and accessories. Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG). Design and construction
I.S. EN 1562:2012 FOUNDING - MALLEABLE CAST IRONS
UNE-EN 13445-10:2016 Unfired pressure vessels - Part 10: Additional requirements for pressure vessels of nickel and nickel alloys
S.R. CWA 15902-2:2009 LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - PART 2: SPECIFICATIONS FOR DESIGN, MANUFACTURE AND FOR USE OF ALUMINIUM AND STEEL TRUSSES AND TOWERS
I.S. EN 74-2:2008 COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES
I.S. EN 1337-8:2007 STRUCTURAL BEARINGS - PART 8: GUIDE BEARINGS AND RESTRAINT BEARINGS
I.S. EN 1279-6:2002 GLASS IN BUILDING - INSULATING GLASS UNITS - PART 6: FACTORY PRODUCTION CONTROL AND PERIODIC TESTS
I.S. EN 10294-2:2012 HOLLOW BARS FOR MACHINING - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEELS WITH SPECIFIED MACHINABILITY PROPERTIES
I.S. EN 10217-1:2002 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
ISO 21138-3:2007 Plastics piping systems for non-pressure underground drainage and sewerage Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 3: Pipes and fittings with non-smooth external surface, Type B
EN 13445-2:2014/A2:2018 UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
I.S. EN 1329-1:2014 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
EN 378-2:2016 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
KTA 3211.1 : 2015 PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS
DIN EN 1092-1:2016-05 (Draft) FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
UNI EN ISO 21809-1 : 2011 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP)
PREN 14509 : DRAFT 2013 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
EN 10217-3:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
I.S. EN ISO 13918:2018 WELDING - STUDS AND CERAMIC FERRULES FOR ARC STUD WELDING (ISO 13918:2017)
I.S. EN 15551:2017 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
BS EN ISO 18797-1:2017 Petroleum, petrochemical and natural gas industries. External corrosion protection of risers by coatings and linings Elastomeric coating systems-polychloroprene or EPDM
UNE-EN 13480-8:2017 Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping (Endorsed by Asociación Española de Normalización in September of 2019.)
DIN EN 1069-1:2015-09 (Draft) WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS
PREN 14359 : DRAFT 2014 GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
PREN 505 : DRAFT 2012 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET
EN 1562:2012 Founding - Malleable cast irons
IEC 61987-16:2016 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 16: List of properties (LOPs) for density measuring equipment for electronic data exchange
PREN 13480-8 : DRAFT 2012 METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOYS
UNE-EN 15689:2011 Railway applications - Track - Switches and crossings - Crossing components made of cast austenitic manganese steel
UNE-EN 10205:2017 Cold reduced tinmill products - Blackplate
API 6D :2015 SPECIFICATION FOR PIPELINE AND PIPING VALVES
17/30347070 DC : 0 BS EN 10340-2 - STEEL CASTINGS FOR STRUCTURAL USES - PART 2: TECHNICAL DELIVERY CONDITIONS
DIN EN 10217-5:2005-04 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
PREN 10217-7 : DRAFT 2009 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
EN 13445-8 : 2014 COR 2017 UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS
DIN EN 10217-3:2005-04 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
PREN 15566 : DRAFT 2013 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING
UNE-EN ISO/IEC 80079-34:2012 Explosive atmospheres - Part 34: Application of quality systems for equipment manufacture
I.S. EN 61987-12:2016 INDUSTRIAL- PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 12: LISTS OF PROPERTIES (LOPS) FOR FLOW MEASURING EQUIPMENT FOR ELECTRONIC DATA EXCHANGE
ISO 18797-1:2016 Petroleum, petrochemical and natural gas industries — External corrosion protection of risers by coatings and linings — Part 1: Elastomeric coating systems-polychloroprene or EPDM
PREN 12420 : DRAFT 2012 COPPER AND COPPER ALLOYS - FORGINGS
NACE SP 01 15 : 2015 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES
DIN EN 10217-1:2005-04 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
BS EN ISO 28763:2011 Vitreous and porcelain enamels. Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers. Specifications
EN 1563:2011 Founding - Spheroidal graphite cast irons
PREN 12542 : DRAFT 2016 LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE
NF EN 15689 : 2010 RAILWAY APPLICATIONS - TRACK - SWITCHES AND CROSSINGS - CROSSING COMPONENTS MADE OF CAST AUSTENITIC MANGANESE STEEL
PREN 1090-4 : DRAFT 2014 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
ISO 17745:2016 Steel wire ring net panels Definitions and specifications
EN ISO 13918:2018 Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017, Corrected version 2018-05)
I.S. ENV 10169-2:1999 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 2: PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS
UNE-EN 12952-5:2012 Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler
BS EN 14025 : 2013 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION
EN 14025:2013+A1:2016 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION
EN ISO 16228:2018 Fasteners - Types of inspection documents (ISO 16228:2017)
BS EN 10217-6:2002 Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy steel tubes with specified low temperature properties
EN 1090-3:2008 Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
PREN 10255 : DRAFT 2010 NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS
DIN EN 1564:2012-01 Founding - Ausferritic spheroidal graphite cast irons
DIN EN ISO 14232-1:2016-02 (Draft) THERMAL SPRAYING - POWDERS - PART 1: CHARACTERIZATION AND TECHNICAL SUPPLY CONDITIONS (ISO 14232-1:2017)
EN 12285-1:2003 WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS
ISO 17842-1:2015 Safety of amusement rides and amusement devices — Part 1: Design and manufacture
I.S. EN 1092-1:2007 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
I.S. EN 10225:2009 WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS
I.S. EN 14423:2013 CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR
I.S. EN 1057:2006 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR WATER AND GAS IN SANITARY AND HEATING APPLICATIONS
I.S. EN 12261:2002 GAS METERS - TURBINE GAS METERS
UNE-EN 14359:2017 Gas-loaded accumulators for fluid power applications
EN 12420:2014 Copper and copper alloys - Forgings
UNE-EN 10088-2:2015 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
I.S. EN 14509:2013 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
EN 10028-2:2017 Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
ISO 14313:2007 Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves
I.S. EN 14917:2009 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
EN 1561:2011 Founding - Grey cast irons
EN 10028-4:2017 Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
EN 12163:2016 Copper and copper alloys - Rod for general purposes
EN 13942:2009/AC:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES
BS EN 267 : 2009 AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
DIN EN 12392:2016-08 Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment
EN 13942:2009 Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:2007 modified)
DIN EN 1386:2008-05 Aluminium and aluminium alloys - Tread plate - Specifications
DIN EN 10083-1:2006-10 STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
DIN EN 12547:2014-12 CENTRIFUGES - COMMON SAFETY REQUIREMENTS
DIN EN 754-1:2016-10 ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
DIN EN ISO 683-17:2015-02 Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014)
I.S. EN 10132-1:2000 COLD ROLLED NARROW STEEL STRIP FOR HEAT TREATMENT - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL
EN ISO 13628-2:2006/AC:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
DIN EN 12186:2014-12 GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS
DIN EN 14197-1:2003-11 CRYOGENIC VESSELS - STATIC NON-VACUUM INSULATED VESSELS - PART 1: FUNDAMENTAL REQUIREMENTS
DIN EN 2644:1998-06 AEROSPACE SERIES - ROD ASSEMBLIES FOR FLIGHT CONTROLS - TECHNICAL SPECIFICATION
DIN EN 13981-4:2007-02 Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 4: Forgings
DIN EN 13110:2012-07 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION
DIN EN 1976:2013-01 COPPER AND COPPER ALLOYS - CAST UNWROUGHT COPPER PRODUCTS
DIN EN 12420:2014-09 COPPER AND COPPER ALLOYS - FORGINGS
DIN EN ISO 9934-2:2015-12 NON-DESTRUCTIVE TESTING - MAGNETIC PARTICLE TESTING - PART 2: DETECTION MEDIA (ISO 9934-2:2015)
DIN EN 1453-1:2000-03 PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES AND THE SYSTEM
UNE-EN 15711:2010 Vitreous and porcelain enamels - Glass lined flanged steel pipes and flanged steel fittings - Quality requirements
DIN EN 10216-3:2014-03 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
DIN EN 10223-4:2013-02 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 4: STEEL WIRE WELDED MESH FENCING
DIN EN 508-1:2014-08 Roofing and cladding products from metal sheet - Specification for self-supporting of steel, aluminium or stainless steel sheet - Part 1: Steel
DIN EN 3-8:2015-07 (Draft) PORTABLE FIRE EXTINGUISHERS - PART 8: ADDITIONAL REQUIREMENTS TO EN 3-7 FOR THE CONSTRUCTION, RESISTANCE TO PRESSURE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR
DIN EN 10303:2016-02 THIN MAGNETIC STEEL STRIP AND SHEET FOR USE AT MEDIUM FREQUENCIES
DIN EN 10340:2008-01 Steel castings for structural uses
UNE-EN 10208-1:2011 Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A
DIN EN 1337-4 E : 2004 STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS
DIN EN 10089:2003-04 Hot rolled steels for quenched and tempered springs - Technical delivery conditions; German version EN 10089:2002
DIN EN 14276-1:2011-05 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
DIN EN 14276-2:2011-05 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
DIN EN 10223-2:2013-02 Steel wire and wire products for fencing and netting - Part 2: Hexagonal steel wire netting for agricultural, insulation and fencing purposes
DIN EN 506:2009-07 This European Standard specifies requirements for self-supporting roofing products for discontinuous laying made from copper or zinc-copper-titanium alloy sheet with or without additional organic coatings.
DIN EN 14141:2013-08 VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS
DIN EN 676:2012-03 (Draft) AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
DIN EN 488:2016-02 DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - STEEL VALVE ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
DIN EN 14424 E : 2013 HOSE FITTINGS WITH SCREWED FERRULES
DIN EN 14782 E : 2006 SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
DIN EN 14140:2015-03 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
DIN EN 13782:2015-06 TEMPORARY STRUCTURE - TENTS - SAFETY
DIN EN 486:2009-11 Aluminium and aluminium alloys - Extrusion ingots - Specifications
DIN EN 1337-5 E : 2005 STRUCTURAL BEARINGS - PART 5: POT BEARINGS
DIN EN 14394 E : 2008 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
UNI EN 10216-2 : 2014 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
DIN EN 14394:2008-12 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C
DIN EN 14359:2011-04 GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
DIN EN 14673:2010-10 Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals (includes Amendment A1:2010)
DIN EN 14436 E : 2004 COPPER AND COPPER ALLOYS - ELECTROLYTICALLY TINNED STRIP
DIN EN ISO 3452-2:2014-03 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2013)
DIN EN 1337-2:2004-07 Structural bearings - Part 2: Sliding elements; German version EN 1337-2:2004
DIN EN 14382:2016-05 (Draft) SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
DIN EN 12166:2015-12 (Draft) COPPER AND COPPER ALLOYS - WIRE FOR GENERAL PURPOSES
DIN EN 14783 E : 2013 FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
UNE-EN 10216-2:2014 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
BS EN 2644:1998 Rod assemblies for flight controls. Technical specification
UNE-EN 14509:2014 Self-supporting double skin metal faced insulating panels - Factory made products - Specifications
BS EN 12735-2:2016 Copper and copper alloys. Seamless, round tubes for air conditioning and refrigeration Tubes for equipment
BS EN 10333:2005 Steel for packaging. Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption. Tin coated steel (tinplate)
UNE-EN 1453-1:2017 Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system
BS EN 10213-1:1996 Technical delivery conditions for steel castings for pressure purposes General
BS EN 13121-1:2003 GRP tanks and vessels for use above ground Raw materials. Specification conditions and acceptance conditions
DIN EN 10305-2:2016-08 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES
BS EN 10208-2:2009 Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class B
BS EN 10305-5:2010 Steel tubes for precision applications. Technical delivery conditions Welded and cold sized square and rectangular tubes
BS EN 12079-2:2006 Offshore containers and associated lifting sets Lifting sets. Design, manufacture and marking
BS EN 10329 : 2005 STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS
BS EN 10217-7:2014 Welded steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes
DIN EN 10296-2 E : 2006 WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL
UNE-EN 755-1:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery
BS EN 1594:2013 Gas infrastructure. Pipelines for maximum operating pressure over 16 bar. Functional requirements
BS EN 12810-1:2003 Facade scaffolds made of prefabricated components Product specifications
UNE-EN 764-4:2015 Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials
BS EN 14436:2004 Copper and copper alloys. Electrolytically tinned strip
BS EN 12168:1998 Copper and copper alloys. Hollow rod for free machining purposes
BS EN 10120:2017 Steel sheet and strip for welded gas cylinders
BS EN 14144:2003 Lifebuoys. Requirements, tests
BS EN 10245-3:2011 Steel wire and wire products. Organic coatings on steel wire PE coated wire
ISO 3310-2:2013 Test sieves — Technical requirements and testing — Part 2: Test sieves of perforated metal plate
BS EN 13706-2:2002 Reinforced plastics composites. Specifications for pultruded profiles Method of test and general requirements
BS EN 13195-1:2002 Aluminium and aluminium alloys. Wrought and cast products for marine applications (shipbuilding, marine and offshore) Specifications
BS EN 10224:2002 Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids. Technical delivery conditions
BS EN 1473:2016 Installation and equipment for liquefied natural gas. Design of onshore installations
BS EN 1401-1:2009 Plastic piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U) Specifications for pipes, fittings and the system
BS EN 1866:2005 Mobile fire extinguishers
BS EN 10264-1:2012 Steel wire and wire products. Steel wire for ropes General requirements
BS EN 12252:2014 LPG equipment and accessories. Equipping of LPG road tankers
BS EN ISO 21809-2:2014 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Single layer fusion-bonded epoxy coatings
BS EN 601:2004 Aluminum and aluminium alloys. Castings. Chemical composition of castings for use in contact with foodstuff
IEC 61987-13:2016 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 13: Lists of properties (LOP) for pressure measuring equipment for electronic data exchange
UNE-EN 14420-7:2014 Hose fittings with clamp units - Part 7: Cam locking couplings
BS EN 12438:2017 Magnesium and magnesium alloys. Magnesium alloys for cast anodes
BS EN 10169-3:2003 Continuously organic coated (coil coated) steel flat products Products for building interior applications
UNE-EN 10088-3:2015 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
BS EN 541:2006 Aluminium and aluminium alloys. Rolled products for cans, closures and lids. Specifications
DIN EN 1337-4:2004-08 Structural bearings - Part 4: Roller bearings
BS EN 40-6:2002 Lighting columns Requirements for aluminium lighting columns
BS EN 1993-1-3:2006 Eurocode 3. Design of steel structures General rules - Supplementary rules for cold-formed members and sheeting
UNE-EN 508-3:2010 Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel
UNE-EN 1982:2018 Copper and copper alloys - Ingots and castings
BS EN 1251-1:2000 Cryogenic vessels. Transportable vacuum insulated vessels of not more than 1000 litres volume Fundamental requirements
UNE-EN 10216-4:2014 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
UNE-EN 12438:2018 Magnesium and magnesium alloys - Magnesium alloys for cast anodes
EN 14276-1:2020 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
DIN EN 10305-5:2016-08 Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes
UNE-EN 10223-3:2014 Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes
ISO 22476-2:2005 Geotechnical investigation and testing Field testing Part 2: Dynamic probing
BS EN 15085-5:2007 Railway applications. Welding of railway vehicles and components Inspection, testing and documentation
UNE-EN 12450:2013 Copper and copper alloys - Seamless, round copper capillary tubes
UNE-EN 1564:2012 Founding - Ausferritic spheroidal graphite cast irons
UNI EN 267 : 2011 AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
UNE-EN 12449:2016 Copper and copper alloys - Seamless, round tubes for general purposes
ONORM EN 676 : 2008 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
EN 13480-3:2017 Metallic industrial piping - Part 3: Design and calculation
UNI EN 14276-2 : 2011 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
UNI EN 12542 : 2010 LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 MUE - DESIGN AND MANUFACTURE
UNI EN 14276-1 : 2011 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
EN ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009)
EEMUA 182 : 2004 SPECIFICATION FOR INTEGRAL BLOCK AND BLEED VALVE MANIFOLDS FOR DIRECT CONNECTION TO PIPEWORK
EN 13094:2015 Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction
I.S. EN 13480-3:2017 METALLIC INDUSTRIAL PIPING - PART 3: DESIGN AND CALCULATION
UNE-EN 10225:2010 Weldable structural steels for fixed offshore structures - Technical delivery conditions
I.S. EN 13094:2015 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION
EN 12542:2010 LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture
EN 1474-1:2008 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms
EN 14532-3:2004 Welding consumables - Test methods and quality requirements - Part 3: Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys
EN 485-1:2016 Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery
EN 506:2008 Roofing products of metal sheet - Specification for self-supporting products of copper or zinc sheet
EN 10334:2005 Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Non-coated steel (blackplate)
EN 15085-4:2007 Railway applications - Welding of railway vehicles and components - Part 4: Production requirements
EN 502:2013 Roofing products from metal sheet - Specification for fully supported roofing products of stainless steel sheet
EN ISO 21809-2:2014 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Single layer fusion-bonded epoxy coatings (ISO 21809-2:2014)
EN 488:2015 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
EN ISO 3452-3:2013 NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 3: REFERENCE TEST BLOCKS (ISO 3452-3:2013)
UNI EN 1057 : 2010 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR WATER AND GAS IN SANITARY AND HEATING APPLICATIONS
UNI EN 10088-3 : 2014 STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMIFINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
UNI EN 13348 : 2008 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR MEDICAL GASES OR VACUUM
UNI EN 10257-2 : 2011 ZINC OR ZINC ALLOY COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - PART 2: SUBMARINE CABLES
UNI EN 1976 : 2012 COPPER AND COPPER ALLOYS - CAST UNWROUGHT COPPER PRODUCTS
UNI EN 10208-2 : 2009 STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
UNI EN 487 : 2009 ALUMINIUM AND ALUMINIUM ALLOYS - ROLLING INGOTS - SPECIFICATIONS
UNI EN 10223-6 : 2013 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 6: STEEL WIRE CHAIN LINK FENCING
UNI EN 10107 : 2014 GRAIN-ORIENTED ELECTRICAL STEEL STRIP AND SHEET DELIVERED IN THE FULLY PROCESSED STATE
UNI EN ISO 683-17 : 2014 HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS
UNI EN 10269 : 2013 Nickel steels and alloys for fasteners with specific properties at high and / or low temperatures
UNI EN 13942 : 2009 PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES
UNI EN 10225 : 2009 WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS
UNI EN 12952-5 : 2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER
UNI EN 13084-7 : 2013 FREE-STANDING CHIMNEYS - PART 7: PRODUCT SPECIFICATIONS OF CYLINDRICAL STEEL FABRICATIONS FOR USE IN SINGLE WALL STEEL CHIMNEYS AND STEEL LINERS
UNI EN 10268 : 2013 COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
UNI EN 14509 : 2013 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
UNI EN 10223-8 : 2014 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS
UNI EN 12186 : 2014 GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS
UNI EN 13599 : 2014 COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES
UNI EN 14783 : 2013 FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
UNI EN 13835 : 2012 FOUNDING - AUSTENITIC CAST IRONS
UNI EN 10238 : 2009 AUTOMATICALLY BLAST-CLEANED AND AUTOMATICALLY PREFABRICATION PRIMED STRUCTURAL STEEL PRODUCTS
UNI EN 10245-3 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE
UNI EN 10250-1 : 2001 OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - GENERAL REQUIREMENTS
UNI EN 13941 : 2011 DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING
UNI EN 505 : 2013 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET
UNI EN 1337-2 : 2004 STRUCTURAL BEARINGS - PART 2: SLIDING ELEMENTS
UNI EN 1654 : 1999 COPPER AND COPPER ALLOYS - STRIP FOR SPRINGS AND CONNECTORS
UNI EN 10083-1 : 2006 STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
UNI EN 14394 : 2008 HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREES C
UNI EN 12952-2 : 2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
UNI EN 10219-1 : 2006 COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS
UNI EN 14673 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
UNI EN 10257-1 : 2011 ZINC OR ZINC ALLOY COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - PART 1: LAND CABLES
UNI EN 14893 : 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
UNI EN 10255 : 2007 NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS
UNI EN 15711 : 2009 VITREOUS AND PORCELAIN ENAMELS - GLASS LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS - QUALITY REQUIREMENTS
UNI EN 1652 : 1999 COPPER AND COPPER ALLOYS - PLATE, SHEET, STRIP AND CIRCLES FOR GENERAL PURPOSES
UNI EN 506 : 2008 ROOFING PRODUCTS OF METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF COPPER OR ZINC SHEET
ONORM EN 12020-1 : 2008 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
UNI EN 13774 : 2013 VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS
UNI EN 12451 : 2012 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS
UNI EN 12547 : 2014 CENTRIFUGES - COMMON SAFETY REQUIREMENTS
UNI EN 10083-3 : 2006 STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
UNI EN 13802 : 2014 RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS
UNI EN 10223-5 : 2013 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 5: STEEL WIRE WOVEN HINGED JOINT AND KNOTTED MESH FENCING
UNI EN 14424 : 2013 HOSE FITTINGS WITH SCREWED FERRULES
UNI EN 10223-7 : 2013 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING
UNI EN 1993-1-3 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD-FORMED MEMBERS AND SHEETING