• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

1997/23/EC : 1997

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT
Available format(s)

Hardcopy

Superseded date

18-07-2016

Language(s)

English

Published date

12-01-2013

DocumentType
Miscellaneous Product
Pages
55
PublisherName
European Union
Status
Superseded
SupersededBy

14/30259637 DC : 0 BS EN ISO 21013-3 - CRYOGENIC VESSELS - PRESSURE-RELIEF ACCESSORIES FOR CRYOGENIC SERVICE - PART 3: SIZING AND CAPACITY DETERMINATION
I.S. EN 13121-3:2016 GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP
EN 13175:2014 LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
07/30165249 DC : 0 BS EN 15154-3 - EMERGENCY SAFETY SHOWERS - PART 3: NON PLUMBED-IN BODY SHOWERS
PD CEN/TR 14585-2:2006 Corrugated metal hose assemblies for pressure applications Guidance on the use of conformity assessment procedures
08/30184309 DC : DRAFT SEP 2008 BS EN 12952-5 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER
UNI EN 15154-4 : 2009 EMERGENCY SAFETY SHOWERS - PART 4: NON PLUMBED-IN EYEWASH UNITS
CEI EN 50216-9 : 2010 POWER TRANSFORMER AND REACTOR FITTINGS - PART 9: OIL-TO-WATER HEAT EXCHANGERS
02/124462 DC : DRAFT DEC 2002 BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
DIN EN 15573 E : 2009 EARTH-MOVING MACHINERY - DESIGN REQUIREMENTS FOR CIRCULATION ON THE ROAD
14/30266380 DC : 0 BS EN ISO 15614-8 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 8: WELDING OF TUBES TO TUBE-PLATE JOINTS
I.S. EN 15424:2007 STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
10/30202723 DC : DRAFT JUNE 2010 BS EN 12952-7 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 7: REQUIREMENTS FOR EQUIPMENT FOR THE BOILER
BS EN 1829-1:2010 High pressure water jet machines. Safety requirements Machines
14/30304346 DC : 0 BS EN ISO 17782 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - QUALIFICATION OF MANUFACTURERS OF SPECIAL MATERIALS
12/30261215 DC : 0 BS EN 13060 - SMALL STEAM STERILIZERS
10/30216705 DC : 0 BS EN 12953-2 - SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
05/30133040 DC : DRAFT APR 2005 BS EN 1866 - MOBILE FIRE EXTINGUISHERS
05/30042912 DC : DRAFT JAN 2005 PREN 15045 - TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE SEAMLESS ALUMINIUM OR ALUMINIUM ALLOY GAS CYLINDERS FOR PORTABLE CO[2] FIRE EXTINGUISHERS OF WATER CAPACITIES FROM 0,5 LITRE UP TO 15 LITRES
PREN 10028-5 : DRAFT 2014 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 5: WELDABLE FINE GRAIN STEELS, THERMOMECHANICALLY ROLLED
BS EN 16340:2014 Safety and control devices for burners and appliances burning gaseous or liquid fuels. Combustion product sensing devices
13/30259076 DC : 0 BS EN 13445-8 - UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS
BS 5908-2:2012 Fire and explosion precautions at premises handling flammable gases, liquids and dusts Guide to applicable standards and regulations
BS EN 16678:2015 Safety and control devices for gas burners and gas burning appliances. Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
14/30312167 DC : 0 BS EN 10028-6 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 6: WELDABLE FINE GRAIN STEELS, QUENCHED AND TEMPERED
PREN 1564 : DRAFT 2009 FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRON
11/30252448 DC : 0 BS EN 1422 - STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
05/30134037 DC : 0 EN 12516-4 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
BS EN 15573:2008 Earth-moving machinery. Design requirements for circulation on the road
04/100723 DC : DRAFT JAN 2004 EN 10213 - STEEL CASTINGS FOR PRESSURE PURPOSES
PREN 14129 : DRAFT 2011 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG TANKS
12/30270647 DC : 0 BS EN 10222-4 - STEEL FORGINGS FOR PRESSURE PURPOSES - PART 4: WELDABLE FINE GRAIN STEELS WITH HIGH PROOF STRENGTH
12/30263594 DC : 0 BS EN 14570 - LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF OVERGROUND AND UNDERGROUND LPG VESSELS
BS EN 3-10:2009 Portable fire extinguishers Provisions for evaluating the conformity of a portable fire extinguisher to EN 3-7
EN 13445-10:2015 Unfired pressure vessels - Part 10: Additional requirements for pressure vessels of nickel and nickel alloys
EN 16282-7:2017 Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 7: Installation and use of fixed fire suppression systems
PD CEN/TR 16332:2012 Non-destructive testing. Interpretation of EN ISO/IEC 17024 for NDT personnel certification application
01/715005 DC : DRAFT NOV 2001 EN 764-1 PRESSURE EQUIPMENT TERMINOLOGY - PART 1: PRESSURE, TEMPERATURE, VOLUME AND NOMINAL SIZE
12/30266853 DC : 0 BS EN 1866-2 - MOBILE FIRE EXTINGUISHERS - PART 2: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS, WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 1866-1
UNE-EN ISO 15494:2016 Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015)
PREN 14180 : DRAFT 2012 STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
14/30301152 DC : 0 BS EN 12392 - ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT
PREN 13136 : DRAFT 2011 REFRIGERATING SYSTEMS AND HEAT PUMPS - PRESSURE RELIEF DEVICES AND THEIR ASSOCIATED PIPING - METHODS FOR CALCULATION
07/30152563 DC : 0 BS 5306-3 - FIRE EXTINGUISHING INSTALLATIONS AND EQUIPMENT ON PREMISES - PART 3: CODE OF PRACTICE FOR THE COMMISSIONING AND MAINTENANCE OF PORTABLE FIRE EXTINGUISHERS
04/30123995 DC : DRAFT OCT 2004 EN 50216-10 - POWER TRANSFORMER AND REACTOR FITTINGS - PART 10: OIL-TO-AIR HEAT EXCHANGERS
DIN EN 16617:2015-07 PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING
DIN EN 15154-3:2009-07 EMERGENCY SAFETY SHOWERS - PART 3: NON PLUMBED-IN BODY SHOWERS
BS EN 16474:2015 Plastics and rubber machines. Tyre curing machines. Safety requirements
BS EN 50216-10:2009 Power transformer and reactor fittings Oil-to-air heat exchangers
09/30200840 DC : 0 BS EN 1564 - FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRON
10/30201497 DC : 0 BS EN 10305-4 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
10/30227671 DC : 0 BS EN 14678-1 - LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
BS EN 1562:2012 Founding. Malleable cast irons
PREN 474-1 : DRAFT 2017 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
PD CEN/TR 15339-1:2014 Thermal spraying. Safety requirements for thermal spraying equipment General requirements
PREN 285 : DRAFT 2013 STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
PREN 12392 : DRAFT 2014 ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT
14/30312164 DC : 0 BS EN 10028-5 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 5: WELDABLE FINE GRAIN STEELS, THERMOMECHANICALLY ROLLED
04/30121918 DC : DRAFT SEP 2004 EN 1591-3 - FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 3: CALCULATION METHOD FOR METAL TO METAL CONTACT TYPE FLANGED JOINT
BS EN 60335-2-71:2003 Household and similar electrical appliances. Safety Particular requirements for electrical heating appliances for breeding and rearing animals
10/30217107 DC : 0 BS ISO 9606-1 - APPROVAL TESTING OF WELDERS - FUSION WELDING - PART 1: STEELS
14/30301577 DC : 0 BS EN 16767 - INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES
12/30250279 DC : 0 BS EN 12252 - LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
I.S. EN 1515-4:2009 FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
ASTM D 7650 : 2013 : REDLINE Standard Test Method for Sampling of Particulate Matter in High Pressure Hydrogen used as a Gaseous Fuel with an In-Stream Filter
07/30163456 DC : 0 BS ISO 20474-1 - EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
FD CEN/TR 14549 : 2005 FD GUIDE TO THE USE OF ISO 15649 AND ANSI/ASME B31.3 FOR PIPING IN EUROPE IN COMPLIANCE WITH THE PRESSURE EQUIPMENT DIRECTIVE
06/30140276 DC : 0 EN 473 - NON-DESTRUCTIVE TESTING - QUALIFICATION AND CERTIFICATION OF NDT PERSONNEL - GENERAL PRINCIPLES
I.S. CEN TR 15120:2005 TANKS FOR TRANSPORT OF DANGEROUS GOODS - GUIDANCE AND RECOMMENDATIONS FOR LOADING, TRANSPORT AND UNLOADING
EN ISO 15494:2015 Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015)
PREN 13060 : DRAFT 2012 SMALL STEAM STERILIZERS
DIN 2876:2002-06 FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS GLASS LINED - TECHNICAL SPECIFICATIONS
I.S. EN 60335-2-74:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-74: PARTICULAR REQUIREMENTS FOR PORTABLE IMMERSION HEATERS
NF EN 10217-3 : 2002 AMD 1 2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
BS EN 50131-8:2009 Alarm systems. Intrusion and hold-up systems Security fog device/systems
ISO/TS 19880-1:2016 Gaseous hydrogen Fuelling stations Part 1: General requirements
BS EN 13445-3 : 2014 UNFIRED PRESSURE VESSELS - PART 3: DESIGN
PREN 10028-6 : DRAFT 2014 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 6: WELDABLE FINE GRAIN STEELS, QUENCHED AND TEMPERED
PREN 14140 : DRAFT 2012 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
S.R. CEN/TR 15339-1:2014 THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 1: GENERAL REQUIREMENTS
I.S. EN 60335-2-28:2003&A1:2008&A11:2018 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-28: PARTICULAR REQUIREMENTS FOR SEWING MACHINES
UNI EN 13175 : 2015 LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
I.S. EN 1829-1:2010 HIGH PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 1: MACHINES
I.S. EN 13445-2:2014 UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
ISO 4126-2:2003 Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices
BS EN 14917 : 2009 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
I.S. EN 13175:2014 LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
UNI EN 15573 : 2009 EARTH-MOVING MACHINERY - DESIGN REQUIREMENTS FOR CIRCULATION ON THE ROAD
PREN 10028-1 : DRAFT 2014 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
NF EN 10217-6 : 2002 AMD 1 2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
EN 14917:2009+A1:2012 Metal bellows expansion joints for pressure applications
NF EN 10217-5 : 2002 AMD 1 2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
15/30324370 DC : 0 BS EN 3-8 - PORTABLE FIRE EXTINGUISHERS - PART 8: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 3-7
BS EN 10217-4:2002 Welded steel tubes for pressure purposes. Technical delivery conditions Electric welded non-alloy steel tubes with specified low temperature properties
NF EN 10217-2 : 2002 AMD 1 2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
I.S. CEN/TR 14585-2:2006 CORRUGATED METAL HOSE ASSEMBLIES FOR PRESSURE APPLICATIONS - PART 2: GUIDANCE ON THE USE OF CONFORMITY ASSESSMENT PROCEDURES
BS EN ISO 4126-2:2003 Safety devices for protection against excessive pressure Bursting disc safety devices
BS EN 12953-4:2002 Shell boilers Workmanship and construction of pressure parts of the boiler
BS EN 10217-5:2002 Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
PREN 378-1 : DRAFT 2013 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 1: BASIC REQUIREMENTS, DEFINITIONS, CLASSIFICATION AND SELECTION CRITERIA
EN 10217-5:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
EN ISO 4126-1:2013/A1:2016 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 1: SAFETY VALVES (ISO 4126-1:2013/AMD 1:2016)
EN 13445-3:2014/A4:2018 UNFIRED PRESSURE VESSELS - PART 3: DESIGN
NF EN ISO 16139 : 2006 INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTIC MATERIALS
I.S. EN ISO 16136:2006 INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS
I.S. EN ISO 21787:2006 INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS
NF EN 12953-5 : 2002 SHELL BOILERS - PART 5: INSPECTION DURING CONSTRUCTION, DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER
I.S. EN ISO 16138:2006 INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS
I.S. EN ISO 16139:2006 INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS
EN 12266-1:2012 Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
I.S. EN ISO 16135:2006 INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS
I.S. EN ISO 16137:2006 INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS
DIN EN 12952-7:2013-01 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 7: REQUIREMENTS FOR EQUIPMENT FOR THE BOILER
DIN EN 1422:2014-08 STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
EN 13121-1:2003 GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - SPECIFICATION CONDITIONS AND ACCEPTANCE CONDITIONS
DIN EN 12953-9:2007-09 Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories
BS EN 764-5:2014 Pressure equipment Inspection documentation of metallic materials and compliance with the material specification
BS EN 1435:1997 Non-destructive examination of welds. Radiographic examination of welded joints
BS EN 1797-1:1998 Cryogenic vessels. Gas/material compatibility Oxygen compatibility
14/30295812 DC : 0 BS 8458 - FIXED FIRE PROTECTION SYSTEMS - RESIDENTIAL AND DOMESTIC WATERMIST SYSTEMS - CODE OF PRACTICE FOR DESIGN AND INSTALLATION
BS EN 13835:2012 Founding. Austenitic cast irons
BS EN 13648-3:2002 Cryogenic vessels. Safety devices for protection against excessive pressure Determination of required discharge. Capacity and sizing
BS EN 12953-10:2003 Shell boilers Requirements for feedwater and boiler water quality
BS EN 12952-7:2002 Water-tube boilers and auxiliary installations Requirements for equipment for the boiler
BS EN 12288:2010 Industrial valves. Copper alloy gate valves
BS EN ISO 16135:2006 Industrial valves. Ball valves of thermoplastic materials
UNE-EN 764-5:2015 Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification
BS EN ISO 15614-5:2004 Specification and qualification of welding procedures for metallic materials. Welding procedure test Arc welding of titanium, zirconium and their alloys
BS EN 14983:2007 Explosion prevention and protection in underground mines. Equipment and protective systems for firedamp drainage
BS EN 14382 : 2005 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
DIN EN 14893:2014-09 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
UNE-EN 12953-1:2013 Shell boilers - Part 1: General
BS EN 12952-12:2003 Water-tube boilers and auxiliary installations Requirements for boiler feedwater and boiler water quality
BS EN 10204:2004 Metallic products. Types of inspection documents
I.S. EN 14276-1:2006 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
BS EN 13648-1:2008 Cryogenic vessels. Safety devices for protection against excessive pressure Safety valves for cryogenic service
UNE-EN 12953-6:2012 Shell Boilers - Part 6: Requirements for equipment for the boiler
BS EN 15424:2007 Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for medical devices
BS EN 1984:2010 Industrial valves. Steel gate valves
BS EN 14075:2002 Static welded steel cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m<sup>3</sup> and for installation underground. Design and manufacture
BS EN 12420:2014 Copper and copper alloys. Forgings
BS EN 1252-1:1998 Cryogenic vessels. Materials Toughness requirements for temperatures below -80°C
BS EN 12110:2014 Tunnelling machines. Air locks. Safety requirements
BS EN ISO 16139:2006 Industrial valves. Gate valves of thermoplastic materials
I.S. EN 12952-7:2012 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 7: REQUIREMENTS FOR EQUIPMENT FOR THE BOILER
DIN EN 1422:1997-11 STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
I.S. EN 14222:2003 STAINLESS STEEL SHELL BOILERS
CEN/TS 14972:2011 Fixed firefighting systems - Watermist systems - Design and installation
EN 15609:2012 LPG equipment and accessories - LPG propulsion systems for boats, yachts and other craft
EN 1114-1:2011 Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders
EN 12288:2010 Industrial valves - Copper alloy gate valves
EN 60335-2-99:2003 Household and similar electrical appliances - Safety - Part 2-99: Particular requirements for commercial electric hoods
EN 1289:1998/A2:2003 NON-DESTRUCTIVE TESTING OF WELDS - PENETRANT TESTING OF WELDS - ACCEPTANCE LEVELS
CEN/TR 16332:2012 Non-destructive testing - Interpretation of EN ISO/IEC 17024 for NDT personnel certification application
EN 1252-2:2001 Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures between -80 °C and -20 °C
EN 60335-2-39:2003/A2:2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-39: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC MULTI-PURPOSE COOKING PANS
EN 1092-3:2003/AC:2007 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES
EN 12952-14:2004 Water-tube boilers and auxiliary installations - Part 14: Requirements for flue gas DENOX-systems using liquified pressurized ammonia and ammonia water solution
EN 61010-2-012:2016 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment
EN 12952-5:2011 Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler
EN 12953-13:2012 Shell boilers - Part 13: Operating instructions
EN 1057:2006+A1:2010 Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
EN 12953-1:2012 Shell boilers - Part 1: General
DIN EN 12952-14:2004-09 Water-tube boilers and auxiliary installations - Part 14: Requirements for fluegas DENOX systems using liquified pressurized ammonia and ammonia water solution
EN 12952-3:2011 Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler
EN 50131-8:2009 Alarm systems - Intrusion and hold-up systems - Part 8: Security fog device/systems
EN 13624:2013 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity in the medical area - Test method and requirements (phase 2, step 1)
EN 13554:2011 Non-destructive testing - Acoustic emission testing - General principles
EN 1252-1:1998/AC:1998 CRYOGENIC VESSELS - MATERIALS - PART 1: TOUGHNESS REQUIREMENTS FOR TEMPERATURES BELOW -80 DEGREE C
CEN/TR 16395:2012 Gas Infrastructure - CEN/TC 234 Pressure Definitions - Guideline Document
EN 1290:1998/A2:2003 NON-DESTRUCTIVE EXAMINATION OF WELDS - MAGNETIC PARTICLE EXAMINATION OF WELDS
EN ISO 17659:2004 Welding - Multilingual terms for welded joints with illustrations (ISO 17659:2002)
EN 1291:1998/A2:2003 NON-DESTRUCTIVE TESTING OF WELDS - MAGNETIC PARTICLE TESTING OF WELDS - ACCEPTANCE LEVELS
EN 10269:2013 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
EN 12952-12:2003 Water-tube boilers and auxiliary installations - Part 12: Requirements for boiler feedwater and boiler water quality
I.S. EN 13760:2003 AUTOMOTIVE LPG FILLING SYSTEM FOR LIGHT AND HEAVY DUTY VEHICLES - NOZZLE, TEST REQUIREMENTS AND DIMENSIONS
EN 13458-1:2002 Cryogenic vessels - Static vacuum insulated vessels - Part 1: Fundamental requirements
CEN/TS 764-8:2016 Pressure equipment and assemblies - Part 8: Proof test
EN 13547:2013 Industrial valves - Copper alloy ball valves
CEN/TR 14549:2004 Guide to the use of ISO 15649 and ANSI/ASME B31.3 for piping in Europe in compliance with the Pressure Equipment Directive
EN 13458-2:2002/AC:2006 CRYOGENIC VESSELS - STATIC VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING
EN 12778:2002/A1:2005 COOKWARE - PRESSURE COOKERS FOR DOMESTIC USE
NF EN ISO 16137 : 2006 INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTIC MATERIALS
CEN/TS 16769:2015 LPG equipment and accessories - Terminology
EN 60335-2-84:2003/A1:2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-84: PARTICULAR REQUIREMENTS FOR TOILETS
EN 12952-11:2007 Water-tube boilers and auxiliary installations - Part 11: Requirements for limiting devices of the boiler and accessories
EN 60335-2-38:2003/A1:2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-38: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRIDDLES AND GRIDDLE GRILLS
EN 12797:2000/A1:2003 BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS
EN 10305-6:2016 Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
BS 5306-3:2003 Fire extinguishing installations and equipment on premises Code of practice for the inspection and maintenance of portable fire extinguishers
EN 12062:1997/A2:2003 NON-DESTRUCTIVE EXAMINATION OF WELDS - GENERAL RULES FOR METALLIC MATERIALS
EN 1349:2009 Industrial process control valves
EN 60335-2-12 : 2003 AMD 1 2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES
DIN EN 15424:2007-08 STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
EN 12952-18:2012 Water-tube boilers and auxiliary installations - Part 18: Operating instructions
EN 12952-13:2003/A1:2003 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 13: REQUIREMENTS FOR FLUE GAS CLEANING SYSTEMS
I.S. EN 12952-10:2002 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 10: REQUIREMENTS FOR SAFEGUARDS AGAINST EXCESSIVE PRESSURE
EN 13458-3:2003/A1:2005 CRYOGENIC VESSELS - STATIC VACUUM INSULATED VESSELS - PART 3: OPERATIONAL REQUIREMENTS
EN 12952-16:2002 Water-tube boilers and auxiliary installations - Part 16: Requirements for grate and fluidized-bed firing systems for solid fuels for the boiler
EN 13121-3:2016 GRP tanks and vessels for use above ground - Part 3: Design and workmanship
NF EN 676 : 2004 + A2 2008 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
EN 12952-9:2002 Water-tube boilers and auxiliary installations - Part 9: Requirements for firing systems for pulverized solid fuels for the boiler
EN 12451:2012 Copper and copper alloys - Seamless, round tubes for heat exchangers
CEN/TS 1591-4:2007 Flanges and their joints - Design rules for gasketed circular flange connections - Part 4: Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive
EN 12953-2:2012 Shell boilers - Part 2: Materials for pressure parts of boilers and accessories
EN 12952-7:2012 Water-tube boilers and auxiliary installations - Part 7: Requirements for equipment for the boiler
EN 12953-12:2003 Shell boilers - Part 12: Requirements for grate firing systems for solid fuels for the boiler
EN 12186:2014 Gas infrastructure - Gas pressure regulating stations for transmission and distribution - Functional requirements
DIN 2875:2002-06 FLANGED STEEL PIPES AND FITTINGS WITH HARD OR SOFT RUBBER LININGS - TECHNICAL DELIVERY CONDITIONS
NF EN ISO 15610 : 2004 SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BASED ON TESTED WELDING CONSUMABLES
DEFSTAN 66-31(PT1)/2(2008) : 2008 BASIC REQUIREMENTS AND TESTS FOR ELECTRONIC AND ELECTRICAL TEST AND MEASUREMENT EQUIPMENT - PART 1: INTRODUCTION AND GUIDE TO THE SPECIFICATION AND SELECTION OF TEST AND MEASUREMENT EQUIPMENT BY THE PROCURING AUTHORITY
DEFSTAN 66-31(PT2)/1(2007) : 2007 BASIC REQUIREMENTS & TESTS FOR ELECTRONIC & ELECTRICAL TEST & MEASUREMENT EQUIPMENT - PART 2: CONTRACTOR GENERAL REQUIREMENTS
BS EN 1349:2009 Industrial process control valves
DEFSTAN 66-31(PT1)/1(2007) : 2007 BASIC REQUIREMENTS & TESTS FOR ELECTRONIC & ELECTRICAL TEST & MEASUREMENT EQUIPMENT - PART 1: INTRODUCTION AND GUIDE TO THE SPECIFICATION AND SELECTION OF TEST AND MEASUREMENT EQUIPMENT BY THE PROCURING AUTHORITY
DEFSTAN 66-31(PT2)/2(2008) : 2008 BASIC REQUIREMENTS & TESTS FOR ELECTRONIC & ELECTRICAL TEST & MEASUREMENT EQUIPMENT - PART 2: CONTRACTOR GENERAL REQUIREMENTS
PREN 1422 : DRAFT 2011 STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
BS EN 15154-3:2009 Emergency safety showers Non plumbed-in body showers
DIN EN 14917:2012-06 Metal bellows expansion joints for pressure applications (includes Amendment A1:2012)
14/30293465 DC : 0 BS EN 13445-10 - UNFIRED PRESSURE VESSELS - PART 10: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF NICKEL AND NICKEL ALLOYS
BS EN 10217-1:2002 Welded steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties
BS EN 10217-2 : 2002 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
13/30288560 DC : 0 BS EN 12953-3 - SHELL BOILERS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS
NACE SP 01 78 : 2007 DESIGN, FABRICATION, AND SURFACE FINISH PRACTICES FOR TANKS AND VESSELS TO BE LINED FOR IMMERSION SERVICE
12/30262894 DC : 0 BS EN 14180 - STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
I.S. CEN TR 15444:2006 TRANSPORTABLE GAS CYLINDERS - GAS CYLINDERS CONFORMING TO THE TPED TO BE USED FOR PED APPLICATIONS - APPLICABILITY AND JUSTIFICATIONS
EN 10217-7:2014 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
BS EN 16084:2011 Refrigerating systems and heat pumps. Qualification of tightness of components and joints
05/30137621 DC : DRAFT AUG 2005 EN 1564/PRA1 - FOUNDING - AUSTEMPERED DUCTILE CAST IRONS
13/30286091 DC : 0 BS EN 16678 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUT-OFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA
13/30280729 DC : 0 BS EN 12186 - GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS
12/30258581 DC : 0 BS 5908-2 - FIRE AND EXPLOSION PRECAUTIONS AT PREMISES HANDLING FLAMMABLE GASES, LIQUIDS AND DUSTS - PART 2: GUIDE TO APPLICABLE STANDARDS AND REGULATIONS
12/30259073 DC : 0 BS EN 764-5 - PRESSURE EQUIPMENT - PART 5: INSPECTION DOCUMENTATION OF METALLIC MATERIALS AND COMPLIANCE WITH THE MATERIAL SPECIFICATION
13/30248693 DC : 0 BS EN 14893 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
09/30186922 DC : 0 BS EN ISO 13585 - BRAZING - BRAZER QUALIFICATION
BS EN 12953-13:2012 Shell boilers Operating instructions
PREN 12952-7 : DRAFT 2010 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 7: REQUIREMENTS FOR EQUIPMENT FOR THE BOILER
12/30270644 DC : 0 BS EN 10222-3 - STEEL FORGINGS FOR PRESSURE PURPOSES - PART 3: NICKEL STEELS WITH SPECIFIED LOW TEMPERATURE PROPERTIES
PREN 14570 : DRAFT 2012 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF OVERGROUND AND UNDERGROUND LPG VESSELS
BS EN 1866-2:2014 Mobile fire extinguishers Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1
02/121895 DC : DRAFT APR 2002 BS EN 13060 - SMALL STEAM STERILIZERS
06/30156499 DC : 0 BS EN 15573 - EARTH-MOVING MACHINERY - REQUIREMENTS FOR USE ON THE ROAD
09/30205886 DC : 0 BS EN 13789 - INDUSTRIAL VALVES - CAST IRON GLOBE VALVES
PREN 13789 : DRAFT 2009 INDUSTRIAL VALVES - CAST IRON GLOBE VALVES
EN 474-1:2006+A5:2018 Earth-moving machinery - Safety - Part 1: General requirements
BS 7373-2:2001 Product specifications Guide to identifying criteria for a product specification and to declaring product conformity
11/30253751 DC : 0 BS EN 10269 - STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES
11/30248111 DC : 0 BS EN 13136 - REFRIGERATING SYSTEMS AND HEAT PUMPS - PRESSURE RELIEF DEVICES AND THEIR ASSOCIATED PIPING - METHODS FOR CALCULATION
PREN 13709 : DRAFT 2009 INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES
PREN 1984 : DRAFT 2009 INDUSTRIAL VALVES - STEEL GATE VALVES
I.S. EN 16084:2011 REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS
I.S. CEN TR 14549:2004 GUIDE TO THE USE OF ISO 15649 AND ANSI/ASME B31.3 FOR PIPING IN EUROPE IN COMPLIANCE WITH THE PRESSURE EQUIPMENT DIRECTIVE
11/30248684 DC : 0 BS EN 14129 - LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG TANKS
09/30200088 DC : 0 BS EN 14879-6 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
13/30291771 DC : DRAFT DEC 2013 BS EN 378-1 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 1: BASIC REQUIREMENTS, DEFINITIONS, CLASSIFICATION AND SELECTION CRITERIA
BS EN 16617:2015 Pipework. Corrugated metal hose assemblies for combustible gas. Performance requirements, testing and marking
00/708223 DC : DRAFT MAY 2000 BS EN ISO 15614-9 - SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 9: UNDERWATER HYPERBARIC WET WELDING
DIN EN 14879-6:2010-04 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 6: Combined linings with tile and brick layers
DIN 29595:2007-04 Welding in aerospace - Fusion welded metallic components - Requirements
IEC 62642-8:2011 Alarm systems - Intrusion and hold-up systems - Part 8: Security fog device/systems
11/30249105 DC : 0 BS EN 12516-1 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS
09/30197349 DC : 0 BS ISO 4126-5 - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 5: CONTROLLED SAFETY PRESSURE-RELIEF SYSTEMS (CSPRS)
DD CEN/TS 14421:2006 Hose tail and ferrule for crimping and swaging
UNI EN 1515-4 : 2010 FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
BS ISO 11901-4:2014 Tools for pressing. Gas springs Gas springs with increased spring force and same built height
DIN EN 16652-1 E : 2016 LPG EQUIPMENT AND ACCESSORIES - AUTOMOTIVE LPG VEHICLES WORKSHOPS - PART 1: WORKING AREAS AND PROCEDURES
PREN ISO 4126-1 : DRAFT 2009 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 1: SAFETY VALVES
BS EN 14879-6:2009 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Combined linings with tile and brick layers
11/30234814 DC : 0 BS EN 1591-4 - FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 4: QUALIFICATION OF PERSONNEL COMPETENCY IN THE ASSEMBLY OF BOLTED JOINTS FITTED TO EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE
13/30278676 DC : 0 BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
11/30249111 DC : 0 BS EN 12516-4 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
DIN ISO 11901-1:2005-09 Tools for pressing - Gas springs - Part 1: General specifications (ISO 11901-1:2003)
09/30207501 DC : 0 BS EN 10217-1 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
DIN EN 1829-1:2010-05 High pressure water jet machines - Safety requirements - Part 1: Machines
11/30253901 DC : 0 BS EN 13445-5 - UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING
02/711696 DC : DRAFT OCT 2002 EN 14570 - EQUIPPING OF LPG TANKS, OVERGROUND AND UNDERGROUND
PREN 12952-11 : DRAFT 99 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - REQUIREMENTS FOR LIMITING DEVICES AND SAFETY CIRCUITS OF THE BOILER AND ACCESSORIES
I.S. EN 16652-1:2016 LPG EQUIPMENT AND ACCESSORIES - AUTOMOTIVE LPG VEHICLES WORKSHOPS - PART 1: WORKING AREAS AND PROCEDURES
14/30302601 DC : 0 BS EN ISO 18081 - NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION - LEAK DETECTION BY MEANS OF ACOUSTIC EMISSION
PREN 12186 : DRAFT 2013 GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS
PREN 764-5 : DRAFT 2012 PRESSURE EQUIPMENT - PART 5: INSPECTION DOCUMENTATION OF METALLIC MATERIALS AND COMPLIANCE WITH THE MATERIAL SPECIFICATION
BS EN 16830:2017 Safety and control devices for burners and appliances burning gaseous or liquid fuels. Control functions in electronic systems. Temperature Control function
BS EN 13445-10:2015 Unfired pressure vessels Additional requirements for pressure vessels of nickel and nickel alloys
I.S. EN 50216-9:2009 POWER TRANSFORMER AND REACTOR FITTINGS - PART 9: OIL-TO-WATER HEAT EXCHANGERS
08/30184312 DC : DRAFT SEP 2008 BS EN 12952-6 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 6: INSPECTION DURING CONSTRUCTION; DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER
08/30174305 DC : DRAFT FEB 2008 BS EN 125 - FLAME SUPERVISION DEVICES FOR GAS BURNING APPLIANCES - THERMOELECTRIC FLAME SUPERVISION DEVICES
BS EN 13445-8 : 2014 UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS
BS EN 50465:2015 European product standard for combined heating power systems using gas fuel
09/30202310 DC : 0 BS EN 12514-2 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 2: SAFETY REQUIREMENTS AND TESTS - FEED PUMPS, CONTROL AND SAFETY DEVICES, SERVICE VESSELS
PD CEN/TR 14549:2004 Guide to the use of ISO 15649 and ANSI/ASME B31.3 for piping in Europe in compliance with the Pressure Equipment Directive
DIN 3387-1:2008-11 Separable unthreaded pipe connections for metal gas pipes - Part 1: Connections for pipes with smooth ends
CEN Guide 14:2010 Common policy guidance for addressing standardisation on qualification of professions and personnel
BS EN 13445-6 : 2014 UNFIRED PRESSURE VESSELS - PART 6: REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM SPHEROIDAL GRAPHITE CAST IRON
DIN EN 14893 E : 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
DIN EN 16084:2011-07 REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS
DIN EN 16713-2:2016-08 DOMESTIC SWIMMING POOLS - WATER SYSTEMS - PART 2: CIRCULATION SYSTEMS - REQUIREMENTS AND TEST METHODS
PREN 764-4 : DRAFT 2012 PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS
I.S. EN 60335-2-47:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-47: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BOILING PANS (IEC 60335-2-47:2002 (EQV))
BS EN 60335-2-88:2002 Specification for safety of household and similar electrical appliances. Particular requirements Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems
UNE-CEN/TR 16332:2012 IN Non-destructive testing - Interpretation of EN ISO/IEC 17024 for NDT personnel certification application
EN 12953-8:2001/AC:2002 SHELL BOILERS - PART 8: REQUIREMENTS FOR SAFEGUARDS AGAINST EXCESSIVE PRESSURE
I.S. EN 60335-2-81:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR FOOT WARMERS AND HEATING MATS (IEC 60335 -2-81:2002 (EQV))
I.S. EN 50131-8:2009 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 8: SECURITY FOG DEVICE/SYSTEMS
I.S. EN 14071:2015 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT
I.S. EN ISO 25424:2011 STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
PREN 10028-3 : DRAFT 2014 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 3: WELDABLE FINE GRAIN STEELS, NORMALIZED
I.S. EN 13060:2014 SMALL STEAM STERILIZERS
UNI CEN/TR 15589 : 2014 NON DESTRUCTIVE TESTING - CODE OF PRACTICE FOR THE APPROVAL OF NDT PERSONNEL BY RECOGNISED THIRD PARTY ORGANISATIONS UNDER THE PROVISIONS OF DIRECTIVE 97/23/EC
I.S. EN 60335-2-9:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-9: PARTICULAR REQUIREMENTS FOR GRILLS, TOASTERS AND SIMILAR PORTABLE COOKING APPLIANCES (IEC 60335-2-9:2002 (MOD))
I.S. EN 13445-10:2015 UNFIRED PRESSURE VESSELS - PART 10: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF NICKEL AND NICKEL ALLOYS
EN 13445-6 : 2014 COR 2017 UNFIRED PRESSURE VESSELS - PART 6: REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM SPHEROIDAL GRAPHITE CAST IRON
I.S. EN 16617:2015 PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING
BS EN 13175:2014 LPG Equipment and accessories. Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
PREN 10272 : DRAFT 2013 STAINLESS STEEL BARS FOR PRESSURE PURPOSES
EN 60335-2-74:2003/A2:2009 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-74: PARTICULAR REQUIREMENTS FOR PORTABLE IMMERSION HEATERS
PD CEN/TS 16769:2015 LPG equipment and accessories. Terminology
UNE-EN 14071:2015 LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment
13/30263186 DC : 0 BS EN 3-8 - PORTABLE FIRE EXTINGUISHERS - PART 8: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS, WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 3-7
PREN 10217-3 : DRAFT 2009 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
UNI EN 15154-3 : 2009 EMERGENCY SAFETY SHOWERS - PART 3: NON PLUMBED-IN BODY SHOWERS
PREN 50465 : DRAFT 2011 GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
I.S. EN 50216-10:2009 POWER TRANSFORMER AND REACTOR FITTINGS - PART 10: OIL-TO-AIR HEAT EXCHANGERS
BS EN 14071:2015 LPG equipment and accessories. Pressure relief valves for LPG pressure vessels. Ancillary equipment
EN 50465 : 2015 GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
EN 12516-4:2014 Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
EN 10217-1:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
EN ISO 4126-2:2003/AC:2006 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES
EN 14071:2015 LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment
IEC TR 61831:2011 On-line analyser systems - Guide to design and installation
EN 10204:2004 Metallic products - Types of inspection documents
I.S. EN 60335-2-48:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-48: PARTICULAR REQUIREMENTS FOR COMMERCIAL GRILLERS AND TOASTERS (IEC 60335-2-48:2002 (EQV))
I.S. EN 50465:2015 GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
I.S. EN 60335-2-39:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-39: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC MULTI-PURPOSE COOKING PANS
NF EN 334 : 2005 + A1 2009 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
I.S. EN 60335-2-26:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-26: PARTICULAR REQUIREMENTS FOR CLOCKS
EN 60335-2-9:2003/A13:2010/AC:2012 Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances
EN 1146:2005 Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape - Requirements, testing, marking
S.R. CWA 15902-1:2009 LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - PART 1: GENERAL REQUIREMENTS (EXCLUDING ALUMINIUM AND STEEL TRUSSES AND TOWERS)
ISO 4126-7:2013 Safety devices for protection against excessive pressure Part 7: Common data
EN 267:2009+A1:2011 Automatic forced draught burners for liquid fuels
DIN EN 12953-12:2004-01 Shell boilers - Part 12: Requirements for grate firing systems for solid fuels for the boiler; German version EN 12953-12:2003
DIN EN 12953-10:2003-12 SHELL BOILERS - PART 10: REQUIREMENTS FOR BOILER FEEDWATER AND BOILER WATER QUALITY
DIN EN 14983 E : 2007 EXPLOSION PREVENTION AND PROTECTION IN UNDERGROUND MINES - EQUIPMENT AND PROTECTIVE SYSTEMS FOR FIREDAMP DRAINAGE
I.S. EN 13121-1:2003 GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - SPECIFICATION CONDITIONS AND ACCEPTANCE CONDITIONS
DIN EN 1594:2013-12 GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS
DIN EN 14570:2014-07 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF OVERGROUND AND UNDERGROUND LPG VESSELS
DIN EN 10269:2014-02 STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES
DIN EN 12952-16 E : 2003 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 16: REQUIREMENTS FOR GRATE AND FLUIDIZED BED FIRING SYSTEMS FOR SOLID FUELS FOR THE BOILER
BS EN 13554:2011 Non-destructive testing. Acoustic emission testing. General principles
UNE-EN 12542:2011 LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture
BS EN 12266-1:2012 Industrial valves. Testing of metallic valves Pressure tests, test procedures and acceptance criteria. Mandatory requirements
ISO 16136:2006 Industrial valves Butterfly valves of thermoplastics materials
BS EN 12334:2001 Industrial valves. Cast iron check valves
UNE-EN 13799:2012 LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
BS EN 12062:1998 Non-destructive examination of welds. General rules for metallic materials
BS EN 334 : 2005 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
UNE-EN 12186:2015 Gas infrastructure - Gas pressure regulating stations for transmission and distribution - Functional requirements
BS EN 13648-2:2002 Cryogenic vessels. Safety devices for protection against excessive pressure Bursting disc safety devices for cryogenic service
BS EN 12516-3:2002 Valves. Shell design strength Experimental method
ISO 19859:2016 Gas turbine applications Requirements for power generation
BS EN 3-8:2006 Portable fire extinguishers Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar
BS EN 12797:2000 Brazing. Destructive tests of brazed joints
BS EN 13134:2000 Brazing. Procedure approval
ISO 4126-3:2006 Safety devices for protection against excessive pressure Part 3: Safety valves and bursting disc safety devices in combination
ISO 25424:2009 Sterilization of medical devices Low temperature steam and formaldehyde Requirements for development, validation and routine control of a sterilization process for medical devices
BS EN 1797:2001 Cryogenic vessels. Gas/material compatibility
BS EN 14197-2 : 2003 CRYOGENIC VESSELS - STATIC NON-VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING
BS EN ISO 4126-5 : 2013 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 5: CONTROLLED SAFETY PRESSURE RELIEF SYSTEMS (CSPRS) (ISO 4126-5:2013)
BS EN 13709:2002 Industrial valves. Steel globe and globe stop and check valves
UNE-EN 10305-4:2016 Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
EN ISO 4126-3:2006 Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2006)
I.S. EN 12542:2010 LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE
I.S. EN 1949:2011 SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES (INCLUDING IRISH NATIONAL ANNEX)
I.S. EN 764-5:2014 PRESSURE EQUIPMENT - PART 5: INSPECTION DOCUMENTATION OF METALLIC MATERIALS AND COMPLIANCE WITH THE MATERIAL SPECIFICATION
I.S. EN 13648-1:2008 CRYOGENIC VESSELS - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 1: SAFETY VALVES FOR CRYOGENIC SERVICE
I.S. EN 14678-1:2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
I.S. EN 12953-6:2011 SHELL BOILERS - PART 6: REQUIREMENTS FOR EQUIPMENT FOR THE BOILER
I.S. EN 1594:2013 GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS
I.S. EN 14570:2014 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF OVERGROUND AND UNDERGROUND LPG VESSELS
DIN EN 12542:2010-12 LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE
NF EN ISO 16138 : 2006 INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTIC MATERIALS
I.S. EN 13799:2012 LPG EQUIPMENT AND ACCESSORIES - CONTENTS GAUGES FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSELS
EN 14222:2003 Stainless steel shell boilers
I.S. EN 14129:2014 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS
I.S. EN 13554:2011 NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION TESTING - GENERAL PRINCIPLES
DIN EN 12420:1999-03 COPPER AND COPPER ALLOYS - FORGINGS
DIN EN 14585-1:2006-04 Corrugated metal hose assemblies for pressure applications - Part 1: Requirements
I.S. EN 12953-2:2012 SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
I.S. EN 1114-1:2011 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS
I.S. EN 10269:2013 STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES
I.S. EN 12976-1:2017 THERMAL SOLAR SYSTEMS AND COMPONENTS - FACTORY MADE SYSTEMS - PART 1: GENERAL REQUIREMENTS
I.S. EN 12186:2014 GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS
I.S. EN 14180:2014 STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
I.S. EN 14125:2013 THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS
EN 1829-1:2010 High pressure water jet machines - Safety requirements - Part 1: Machines
I.S. EN 14893:2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
I.S. EN 12952-3:2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS OF THE BOILER
I.S. EN 12110:2014 TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS
I.S. EN 12953-1:2012 SHELL BOILERS - PART 1: GENERAL
DIN EN 14180:2003-10 STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
DIN EN 13121-3:2016-10 GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP
NF EN 14276-1 : 2006 + A1 2011 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
DIN EN 764-3:2002-09 PRESSURE EQUIPMENT - PART 3: DEFINITION OF PARTIES INVOLVED
I.S. EN ISO 15614-8:2016 SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 8: WELDING OF TUBES TO TUBE-PLATE JOINTS (ISO 15614-8:2016)
I.S. EN 764-4:2014 PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS
DIN EN 14585-1 Beiblatt 1:2006-04 Corrugated metal hose assemblies for pressure applications - Part 2: Guidance on the use of conformity assessment procedures
I.S. EN 12420:2014 COPPER AND COPPER ALLOYS - FORGINGS
NF EN 14276-2 : 2007 + A1 2011 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
VDI 3003 Blatt 1:2015-11 Nitrogen gas springs in large stamping and forming dies - Safety instructions for usage
VDI 2260:2003-10 Technical warranty for gas cleaning equipment - Particulate and gaseous matter
NF EN 12952-2 : 2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
I.S. EN 12952-9:2002 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 9: REQUIREMENTS FOR FIRING SYSTEMS FOR PULVERIZED SOLID FUELS FOR THE BOILER
BS PD5500(2009) : 2009 SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS
PD 5500:2003 Specification for unfired fusion welded pressure vessels
NF EN 12952-10 : 2002 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 10: REQUIREMENTS FOR SAFEGUARDS AGAINST EXCESSIVE PRESSURE
NF EN 12952-9 : 2003 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 9: REQUIREMENTS FOR FIRING SYSTEMS FOR PULVERIZED SOLID FUEL FOR THE BOILER
BS PD5500(2018) : 2018 SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS
VDI 6300 Blatt 1:2016-05 Genetic engineering operations in genetic engineering facilities - Guidance on safe operation of genetic engineering facilities
I.S. EN 12952-16:2002 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 16: REQUIREMENTS FOR GRATE AND FLUIDIZED-BED FIRING SYSTEMS FOR SOLID FUELS FOR THE BOILER
BS PD5500(2006) : 2006 SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS
VDI 2262 Blatt 1:2013-06 Workplace air - Reduction of exposure to air pollutants - Legal principles, terms and definitions, basic organisational measures for industrial safety and environmental protection
VDI 6002 Blatt 1:2014-03 Solar heating for potable water - Basic principles - System technology and application in residential buildings
NF EN 12952-16 : 2003 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 16: REQUIREMENTS FOR FLUIDIZED BED AND GRATE FIRING SYSTEMS FOR SOLID FUELS FOR THE BOILER
NF EN 12952-8 : 2002 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 8: REQUIREMENTS FOR FIRING SYSTEMS FOR LIQUID AND GASEOUS FUELS FOR THE BOILER
BS PD5500(2012) : 2012 SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS
04/30116812 DC : 0 EN 15004-1 - FIXED FIREFIGHTING SYSTEMS - GAS EXTINGUISHING SYSTEMS - PART 1: GENERAL REQUIREMENTS FOR PLANNING AND INSTALLATION
CEN/TR 15589:2014 Non destructive testing - Code of practice for the approval of NDT personnel by recognised third party organisations under the provisions of Directive 97/23/EC
BS EN ISO 9712:2012 Non-destructive testing. Qualification and certification of NDT personnel
PREN 16282-7 : DRAFT 2014 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 7: INSTALLATION AND USE OF FIXED FIRE SUPPRESSION SYSTEMS
DIN EN 16474 E : 2015 PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS
PREN 1594 : DRAFT 2013 GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS
PD 6686:2006 Guidance on directives, regulations and standards related to prevention of fire and explosion in the process industries
DIN EN 15609:2012-07 LPG equipment and accessories - LPG propulsion systems for boats, yachts and other craft
05/30042957 DC : DRAFT JAN 2005 EN 15047 - TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE SEAMLESS STEEL CYLINDERS FOR PORTABLE FIRE EXTINGUISHERS AND BOTTLES FOR BREATHING APPARATUS OF WATER CAPACITIES FROM 0,5 LITRE UP TO 15 LITRES
11/30245721 DC : 0 BS EN ISO 15614-1:2004/A2 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 1: ARC AND GAS WELDING OF STEELS AND ARC WELDING OF NICKEL AND NICKEL ALLOYS
BS DD8458-1(2010) : 2010 FIXED FIRE PROTECTION SYSTEMS - RESIDENTIAL AND DOMESTIC WATERMIST SYSTEMS - PART 1: CODE OF PRACTICE FOR DESIGN AND INSTALLATION
05/30135337 DC : DRAFT JUN 2005 EN 15266 - STAINLESS STEEL PLIABLE CORRUGATED TUBING SYSTEMS IN BUILDINGS FOR GAS WITH AN OPERATING PRESSURE UP TO 0,5 BAR
12/30268377 DC : 0 BS EN 50156-2 - ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 2: REQUIREMENTS FOR DESIGN, DEVELOPMENT AND TYPE APPROVAL OF SAFETY DEVICES AND SUBSYSTEMS
DD CEN/TS 1591-4:2007 Flanges and their joints. Design rules for gasketed circular flange connections Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive
PREN 14678-1 : DRAFT 2010 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
10/30218988 DC : 0 BS EN 13175 - LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) TANK VALVES AND FITTINGS
14/30294509 DC : 0 BS EN 12952-1 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 1: GENERAL
04/30118524 DC : DRAFT AUG 2004 EN 1057 - COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR WATER AND GAS IN SANITARY AND HEATING APPLICATIONS
12/30259070 DC : 0 BS EN 764-4 - PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS
12/30261889 DC : 0 BS EN 12420 - COPPER AND COPPER ALLOYS - FORGINGS
13/30265684 DC : 0 BS ISO 11901-3 - TOOLS FOR PRESSING - GAS SPRINGS - PART 3: GAS SPRING WITH INCREASED SPRING FORCE AND COMPACT BUILD HEIGHT
09/30197346 DC : 0 BS ISO 4126-4 - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 4: PILOT-OPERATED SAFETY VALVES
S.R. CEN/TS 16769:2015 LPG EQUIPMENT AND ACCESSORIES - TERMINOLOGY
I.S. EN 3-10:2009 PORTABLE FIRE EXTINGUISHERS - PART 10: PROVISIONS FOR EVALUATING THE CONFORMITY OF A PORTABLE FIRE EXTINGUISHER TO EN 3-7
NF EN 50216-10 : 2009 POWER TRANSFORMER AND REACTOR FITTINGS - PART 10: OIL-TO-AIR HEAT EXCHANGERS
13/30279156 DC : 0 BS EN 6101-2-012 ED.1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT
PREN 12516-4 : DRAFT 2011 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
PREN 50156-2 : DRAFT 2012 ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 2: REQUIREMENTS FOR DESIGN, DEVELOPMENT AND TYPE APPROVAL OF SAFETY DEVICES AND SUBSYSTEMS
NF EN ISO 4126-3 : 2006 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 3: SAFETY VALVES AND BURSTING DISC SAFETY DEVICES IN COMBINATION
UNI EN ISO 25424 : 2011 STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
12/30270641 DC : 0 BS EN 10222-2 - STEEL FORGINGS FOR PRESSURE PURPOSES - PART 2: FERRITIC AND MARTENSITIC STEELS WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
CEN/TR 14740:2004 Chemical used for treatment of water intended for human consumption - Ozone-Production - Guidelines for installations and minimal functional requirements
12/30257298 DC : 0 BS EN 676 - FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
09/30197353 DC : 0 BS ISO 4126-7 - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 7: COMMON DATA
14/30312179 DC : 0 BS EN 10028-2 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 2: NON-ALLOY AND ALLOY STEELS WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
10/30217314 DC : 0 BS EN 298 - AUTOMATIC BURNER CONTROL SYSTEMS FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS
PREN 1562 : DRAFT 2009 FOUNDING - MALLEABLE CAST IRONS
13/30288572 DC : 0 BS EN 10272 - STAINLESS STEEL BARS FOR PRESSURE PURPOSES
BS EN 60335-2-99:2003 Specification for safety of household and similar electrical appliances Particular requirements for commercial electric hoods
BS EN ISO 15494:2015 Plastics piping systems for industrial applications. Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP). Metric series for specifications for components and the system
DIN 28030-1:2013-09 Flange joints for process vessels - Part 1: Technical delivery conditions
12/30247796 DC : DRAFT JAN 2012 BS EN 1591-1 - FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 1: CALCULATIONS
BS EN 15609:2012 LPG equipment and accessories. LPG propulsion systems for boats, yachts and other craft
12/30266856 DC : 0 BS EN 1866-3 - MOBILE FIRE EXTINGUISHERS - PART 3: REQUIREMENTS FOR THE ASSEMBLY, CONSTRUCTION AND PRESSURE RESISTANCE OF CO[2] EXTINGUISHERS WHICH COMPLY WITH THE REQUIREMENTS OF EN 1866-1
09/30205883 DC : 0 BS EN 13709 - INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES
12/30270650 DC : 0 BS EN 10222-5 - STEEL FORGINGS FOR PRESSURE PURPOSES - PART 5: MARTENSITIC, AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEELS
BS EN 1866-3:2013 Mobile fire extinguishers Requirements for the assembly, construction and pressure resistance of CO<sub>2</sub> extinguishers which comply with the requirements of EN 1866-1
13/30288575 DC : 0 BS EN 10273 - HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
09/30197343 DC : 0 BS ISO 4126-1 - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 1: SAFETY VALVES
12/30248681 DC : 0 BS EN 14140 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
UNE-EN 3-10:2010 Portable fire extinguishers - Part 10: Provisions for evaluating the conformity of a portable fire extinguisher to EN 3-7
17/30338806 DC : 0 BS EN ISO 25424 - STERILIZATION OF HEALTH CARE PRODUCTS - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
13/30265687 DC : 0 BS ISO 11901-4 - TOOLS FOR PRESSING - GAS SPRINGS - PART 4: GAS SPRINGS WITH INCREASED SPRING FORCE AND SAME BUILD HEIGHT
UNE-EN 16474:2015 Plastics and rubber machines - Tyre curing machines - Safety requirements
BS EN 16652-1:2016 LPG equipment and accessories. Automotive LPG vehicles workshops Working areas and procedures
04/19989519 DC : DRAFT AUG 2004 BS EN ISO 15614-7 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 7: OVERLAY WELDING
11/30242257 DC : 0 BS EN ISO 9712 - NON-DESTRUCTIVE TESTING - QUALIFICATION AND CERTIFICATION OF NDT PERSONNEL - GENERAL PRINCIPLES
15/30324997 DC : 0 BS EN 10305-4 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
BS EN ISO 4126-3:2006 Safety devices for protection against excessive pressure Safety valves and bursting disc safety devices in combination
04/30118252 DC : DRAFT AUG 2004 EN 14917 - METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
12/30262929 DC : 0 BS EN 15339-1 - THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 1: GENERAL REQUIREMENTS
PREN 12451 : DRAFT 2010 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS
PREN 10305-6 : DRAFT 2015 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
PREN 3-8 : DRAFT 2015 PORTABLE FIRE EXTINGUISHERS - PART 8: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 3-7
DIN EN 16474:2015-08 PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS
07/30163939 DC : 0 BS EN 13445-6 AMD3 - UNFIRED PRESSURE VESSELS - PART 6: REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM SPHEROIDAL GRAPHITE CAST IRON
BS ISO 21789:2009 Gas turbine applications — Safety
DIN 2876 E : 1993 ENAMELLED FLANGED STEEL PIPES AND FITTINGS - TECHNICAL DELIVERY CONDITIONS
UNE-EN 16652-1:2016 LPG equipment and accessories - Automotive LPG vehicles workshops - Part 1: Working areas and procedures
DIN 2875 E : 2002 FLANGED STEEL PIPES AND FITTINGS WITH HARD OR SOFT RUBBER LININGS - TECHNICAL DELIVERY CONDITIONS
DIN EN 14917 E : 2012 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
DIN 28030-1 E : 2013 FLANGE JOINTS FOR PROCESS VESSELS - PART 1: TECHNICAL DELIVERY CONDITIONS
ISO 15494:2015 Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system
DIN EN 16652-1:2016-09 LPG EQUIPMENT AND ACCESSORIES - AUTOMOTIVE LPG VEHICLES WORKSHOPS - PART 1: WORKING AREAS AND PROCEDURES
15/30322070 DC : 0 BS EN 1563 - FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS
BS EN 60335-2-10 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-10: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES
I.S. CEN TR 14740:2004 CHEMICAL USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - OZONE-PRODUCTION - GUIDELINES FOR INSTALLATIONS AND MINIMAL FUNCTIONAL REQUIREMENTS
I.S. CEN TS 1591-4:2007 FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 4: QUALIFICATION OF PERSONNEL COMPETENCY IN THE ASSEMBLY OF BOLTED JOINTS FITTED TO EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE
EN 13060:2014 Small steam sterilizers
I.S. EN 60335-2-16:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-16: PARTICULAR REQUIREMENTS FOR FOOD WASTE DISPOSERS (IEC 60335-2-16:2002 (MOD))
S.R. CEN/TS 14972:2011 FIXED FIREFIGHTING SYSTEMS - WATERMIST SYSTEMS - DESIGN AND INSTALLATION
BS EN 13121-3:2016 GRP tanks and vessels for use above ground Design and workmanship
TR 102 532 : 1.2.1 ENVIRONMENTAL ENGINEERING (EE); THE USE OF ALTERNATIVE ENERGY SOLUTIONS IN TELECOMMUNICATION INSTALLATIONS
I.S. EN 474-1:2006 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
UNE-EN 16084:2011 Refrigerating systems and heat pumps - Qualification of tightness of components and joints
I.S. EN 12952-18:2012 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 18: OPERATING INSTRUCTIONS
ISO 11901-3:2014 Tools for pressing Gas springs Part 3: Gas spring with increased spring force and compact built height
ISO/TS 20100:2008 Gaseous hydrogen Fuelling stations
EN 13445-2:2014/A2:2018 UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
S.R. CEN/TR 15120:2013 TANKS FOR TRANSPORT OF DANGEROUS GOODS - GUIDANCE AND RECOMMENDATIONS FOR LOADING, TRANSPORT AND UNLOADING
NORSOK I 001 : 2010 FIELD INSTRUMENTATION
EN 13445-5 : 2014 COR 2017 UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING
DIN EN 474-1:2014-03 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
EN 10217-3:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
I.S. EN 16643:2016 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - NON-BONDED LUOROPLASTIC LINED (E.G. PTFE) HOSES AND HOSE ASSEMBLIES FOR IQUID AND GASEOUS CHEMICALS - SPECIFICATION
NF EN 10217-1 : 2002 AMD 1 2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
PREN 14359 : DRAFT 2014 GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
UNE-EN 1829-1:2010 High pressure water jet machines - Safety requirements - Part 1: Machines
EN 1562:2012 Founding - Malleable cast irons
NF EN 10217-4 : 2002 AMD 1 2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
UNE-EN 13121-3:2017 GRP tanks and vessels for use above ground - Part 3: Design and workmanship
EN 13445-8 : 2014 COR 2017 UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS
PREN 12420 : DRAFT 2012 COPPER AND COPPER ALLOYS - FORGINGS
PREN 10222-3 : DRAFT 2012 STEEL FORGINGS FOR PRESSURE PURPOSES - PART 3: NICKEL STEELS WITH SPECIFIED LOW TEMPERATURE PROPERTIES
UNI CEN/TS 14972 : 2011 FIXED FIREFIGHTING SYSTEMS - WATERMIST SYSTEMS - DESIGN AND INSTALLATION
EEMUA 224 : 2013 A guide to risk-based procurement Quality assurance of safety-critical engineering equipment and materials
PREN 12542 : DRAFT 2016 LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE
EN 60335-2-48 : 2003 AMD 11 2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-48: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRILLERS AND TOASTERS (IEC 60335-2-48:2002)
I.S. EN 60335-2-59:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-59: PARTICULAR REQUIREMENTS FOR INSECT KILLERS
BS EN 10217-6:2002 Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy steel tubes with specified low temperature properties
NF EN 14222 : 2003 STAINLESS STEEL SHELL BOILERS
I.S. EN 60335-2-91:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-91: PARTICULAR REQUIREMENTS FOR WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS
EN 60335-2-16:2003/A2:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-16: PARTICULAR REQUIREMENTS FOR FOOD WASTE DISPOSERS (IEC 60335-2-16:2002/A2:2011)
EN 12420:2014 Copper and copper alloys - Forgings
EN 12516-2:2014 Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
I.S. EN 60335-2-38:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-38: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRIDDLES AND GRIDDLE GRILLS
I.S. EN 60335-2-80:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-80: PARTICULAR REQUIREMENTS FOR FANS
I.S. EN 14917:2009 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
NF EN ISO 15620 : 2001 WELDING - FRICTION WELDING OF METALLIC MATERIALS
BS EN 267 : 2009 AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
DIN EN 13648-1:2009-02 CRYOGENIC VESSELS - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 1: SAFETY VALVES FOR CRYOGENIC SERVICE
DIN EN 12186:2014-12 GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS
DIN EN 12420:2014-09 COPPER AND COPPER ALLOYS - FORGINGS
DIN EN 1949:2013-05 Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles (includes Amendment A1:2013)
NF EN 14382 : 2005 + A1 2009 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
DIN EN 13060:2015-03 SMALL STEAM STERILIZERS
DIN EN 12952-10 E : 2002 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 10: REQUIREMENTS FOR SAFEGUARDS AGAINST EXCESSIVE PRESSURE
DIN EN 14276-1:2011-05 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
DIN EN 12952-13 E : 2003 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 13: REQUIREMENTS FOR FLUE GAS CLEANING SYSTEMS
DIN EN 12952-11 E : 2007 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 11: REQUIREMENTS FOR LIMITING DEVICES OF THE BOILER AND ACCESSORIES
DIN EN ISO 16135:2006-06 INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS
DIN EN 12110:2014-10 TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS
ISO 4126-4:2013 Safety devices for protection against excessive pressure Part 4: Pilot operated safety valves
BS EN 13121-1:2003 GRP tanks and vessels for use above ground Raw materials. Specification conditions and acceptance conditions
BS EN 126:2012 Multifunctional controls for gas burning appliances
BS EN 10217-7:2014 Welded steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes
UNE-EN 764-4:2015 Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials
BS EN 1594:2013 Gas infrastructure. Pipelines for maximum operating pressure over 16 bar. Functional requirements
BS EN 13371:2002 Cryogenic vessels. Couplings for cryogenic service
BS EN ISO 4126-7 : 2013 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 7: COMMON DATA (ISO 4126-7:2013)
BS EN ISO 16138:2006 Industrial valves. Diaphragm valves of thermoplastics materials
UNE-EN 13554:2011 Non-destructive testing - Acoustic emission testing - General principles
BS EN 1714:1998 Non destructive testing of welded joints. Ultrasonic testing of welded joints
BS EN 14570:2014 LPG equipment and accessories. Equipping of overground and underground LPG vessels
BS EN 1626:2008 Cryogenic vessels. Valves for cryogenic service
BS EN 12952-16:2002 Water-tube boilers and auxiliary installations Requirements for grate and fluidized-bed firing systems for solid fuels for the boiler
BS EN 1291:1998 Non-destructive testing of welds. Magnetic particle testing of welds. Acceptance levels
UNE-EN 14678-1:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
UNE-EN 12952-7:2014 Water-tube boilers and auxiliary installations - Part 7: Requirements for equipment for the boiler
DIN EN 12952-11:2007-09 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 11: REQUIREMENTS FOR LIMITING DEVICES OF THE BOILER AND ACCESSORIES
BS EN 1289:1998 Non-destructive examination of welds. Penetrant testing of welds. Acceptance levels
EN 14276-1:2020 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
ISO 16135:2006 Industrial valves Ball valves of thermoplastics materials
18/30359998 DC : 0 BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS
EEMUA 207 : 2009 DOUBLE CONCRETE TANKS FOR LIQUEFIED GAS - GUIDE TO DESIGN, CONSTRUCTION AND OPERATION
EN 60335-2-28:2003/A1:2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-28: PARTICULAR REQUIREMENTS FOR SEWING MACHINES
EEMUA 193 : 2013 MANAGING COMPETENCE ASSURANCE FOR PERSONNEL UNDERTAKING IN-SERVICE INSPECTION OF PRESSURE EQUIPMENT
UNI EN 12542 : 2010 LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 MUE - DESIGN AND MANUFACTURE
UNI EN 14276-1 : 2011 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
EEMUA 138 : 2010 DESIGN AND INSTALLATION OF ON-LINE ANALYSER SYSTEMS
EN 12976-1:2017 Thermal solar systems and components - Factory made systems - Part 1: General requirements
EN 12542:2010 LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture
I.S. EN ISO 15883-1:2009 WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006)
EN ISO 15613:2004 Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004)
EN 16652-1:2016 LPG equipment and accessories - Automotive LPG vehicles workshops - Part 1: Working areas and procedures
EN 14678-1:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
UNI EN 12952-11 : 2007 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 11: REQUIREMENTS FOR LIMITING DEVICES OF THE BOILER AND ACCESSORIES
UNI EN 10269 : 2013 Nickel steels and alloys for fasteners with specific properties at high and / or low temperatures
UNI EN 12952-7 : 2013 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 7: REQUIREMENTS FOR EQUIPMENT FOR THE BOILER
UNI EN 12186 : 2014 GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS
UNI EN 13799 : 2012 LPG EQUIPMENT AND ACCESSORIES - CONTENTS GAUGES FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSELS
UNI EN 14570 : 2014 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF OVERGROUND AND UNDERGROUND LPG VESSELS
EN 50465:2015 Gas appliances - Combined heat and power appliance of nominal heat input inferior or equal to 70 kW
UNI EN 1114-1 : 2011 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS
UNI EN 14893 : 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
UNI EN 1106 : 2010 MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES
UNI EN ISO 15883-1 : 2014 WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS
UNI EN 12953-6 : 2011 SHELL BOILERS - PART 6: REQUIREMENTS FOR EQUIPMENT FOR THE BOILER
EN ISO 21787:2006 Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006)
UNI EN 12952-3 : 2012 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS OF THE BOILER
UNI EN 12420 : 2014 COPPER AND COPPER ALLOYS - FORGINGS
UNI EN 13554 : 2011 NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION TESTING - GENERAL PRINCIPLES
UNI EN 1594 : 2013 GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS
EN 12953-10:2003 Shell boilers - Part 10 : Requirements for feedwater and boiler water quality
UNI EN 14129 : 2014 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS
UNI EN 12953-9 : 2007 SHELL BOILERS - PART 9: REQUIREMENTS FOR LIMITING DEVICES OF THE BOILER AND ACCESSORIES
UNI EN 14125 : 2013 THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS
UNI EN 12953-2 : 2012 SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
UNI EN 473 : 2008-11 NON-DESTRUCTIVE TESTING - QUALIFICATION AND CERTIFICATION OF NDT PERSONNEL - GENERAL PRINCIPLES
EN 12953-7:2002 Shell boilers - Part 7 : Requirements for firing systems for liquid and gaseous fuels for the boilers
UNI EN 12953-1 : 2012 SHELL BOILERS - PART 1: GENERAL
UNI EN 1854 : 2010 PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES
UNI EN 14180 : 2014 STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
UNI EN 14678-1 : 2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
UNI EN 12110 : 2014 TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS
UNI EN 14879-6 : 2010 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
UNI EN 13648-1 : 2009 CRYOGENIC VESSELS - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 1: SAFETY VALVES FOR CRYOGENIC SERVICE
UNI CEN/TR 16395 : 2014 GAS INFRASTRUCTURE - CEN/TC 234 PRESSURE DEFINITIONS GUIDELINE DOCUMENT
17/30350203 DC : 0 BS ISO 16809 - NON-DESTRUCTIVE TESTING - ULTRASONIC THICKNESS MEASUREMENT
04/30112263 DC : 0 PREN ISO 4126-3 - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 3: SAFETY VALVES AND BURSTING DISC SAFETY DEVICES IN COMBINATION
14/30301146 DC : 0 BS EN 19 - INDUSTRIAL VALVES - MARKING OF METALLIC VALVES
DIN EN ISO 25424:2011-09 STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
BS EN 12952-18:2012 Water-tube boilers and auxiliary installations Operating instructions
PD CEN/TR 15589:2014 Non destructive testing. Code of practice for the approval of NDT personnel by recognised third party organisations under the provisions of Directive 97/23/EC
DIN EN 15573:2009-09 EARTH-MOVING MACHINERY - DESIGN REQUIREMENTS FOR CIRCULATION ON THE ROAD
BS EN ISO 25424:2011 Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for medical devices
DIN EN 14879-6 E : 2010 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
13/30212494 DC : 0 BS EN ISO 15494 - PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE) AND POLYPROPYLENE (PP) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES
09/30205877 DC : 0 BS EN 1984 - INDUSTRIAL VALVES - STEEL GATE VALVES
07/30166912 DC : DRAFT AUG 2007 BS EN 15714-3 - INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
BS EN 50216-9:2009 Power transformer and reactor fittings Oil-to-water heat exchangers
BS EN 50156-2:2015 Electrical equipment for furnaces and ancillary equipment Requirements for design, development and type approval of safety devices and subsystems
06/30155368 DC : 0 PREN 14879-6 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
08/30183852 DC : DRAFT AUG 2008 BS EN 1106 - MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES
BS EN 60335-2-91:2003 Specification for safety of household and similar electrical appliances Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers
PREN ISO 15494 : DRAFT 2013 PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE) AND POLYPROPYLENE (PP) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES (ISO/DIS 15494:2013)
04/30111048 DC : 0 EN 88-2 - PRESSURE GOVERNORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 2 - PRESSURE GOVERNORS FOR INLET PRESSURES BETWEEN 0.5 BAR AND 5 BAR
UNI EN 12953-13 : 2012 SHELL BOILERS - PART 13: OPERATING INSTRUCTIONS
PD IEC/TR 61831:2011 On-line analyser systems. Guide to design and installation
14/30298583 DC : 0 BS EN 13121-3 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP
03/108196 DC : 0 EN 10253-4 - BUTT WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
99/707161 DC : DRAFT APR 99 PREN 13480-4 METALLIC INDUSTRIAL PIPING - PART 4: FABRICATION AND INSTALLATION
UNE-EN 16713-2:2017 Domestic swimming pools - Water systems - Part 2: Circulation systems - Requirements and test methods
BS EN 16713-2:2016 Domestic swimming pools. Water systems Circulation systems. Requirements and test methods
14/30300117 DC : 0 BS EN 13175 - LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
09/30188143 DC : DRAFT OCT 2009 BS EN 13480-2:2002/A2 - METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS
ISO/TS 20474-14:2008 Earth-moving machinery Safety Part 14: Information on national and regional provisions
99/706406 DC : DRAFT APR 1999 PREN 13445-6 - UNFIRED PRESSURE VESSELS - PART 6: SAFETY SYSTEMS
99/709737 DC : DRAFT JUNE 1999 PREN 13648-1 - CRYOGENIC VESSELS - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 1: SAFETY VALVES FOR CRYOGENIC SERVICE
14/30294819 DC : 0 BS EN 16713-2 - DOMESTIC SWIMMING POOLS - WATER SYSTEMS - PART 2: CIRCULATION SYSTEMS - REQUIREMENTS AND TEST METHODS
PD CEN/TR 16395:2012 Gas Infrastructure. CEN/TC 234 Pressure Definitions. Guideline Document
BS EN 13547:2013 Industrial valves. Copper alloy ball valves
12/30266928 DC : 0 BS EN 14071 - LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT
10/30234293 DC : 0 BS EN 12110 - TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS
00/717115 DC : DRAFT NOV 2000 PREN 12516-2 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 2: CALCULATION METHOD FOR STEEL VALVE SHELLS
BS ISO 11901-1:2003 Tools for pressing. Gas springs General specifications
PREN 10222-4 : DRAFT 2012 STEEL FORGINGS FOR PRESSURE PURPOSES - PART 4: WELDABLE FINE GRAIN STEELS WITH HIGH PROOF STRENGTH
PREN 12953-3 : DRAFT 2013 SHELL BOILERS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS
UNI EN 1829-1 : 2010 HIGH-PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 1: MACHINES
08/30184303 DC : DRAFT SEP 2008 BS EN 12952-3 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS
12/30255089 DC : 0 BS EN 16474 - PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS
BS EN 1515-4:2009 Flanges and their joints. Bolting Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
13/30291774 DC : 0 BS EN 378-2 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
14/30274238 DC : 0 BS EN 14359 - GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
14/30312173 DC : 0 BS EN 10028-4 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 4: NICKEL ALLOY STEELS WITH SPECIFIED LOW TEMPERATURE PROPERTIES
PREN 676 : DRAFT 2012 FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
09/30202714 DC : 0 BS EN 12266-1 - INDUSTRIAL VALVES - TESTING OF METALLIC VALVES - PART 1: PRESSURE TESTS, TEST PROCEDURES AND ACCEPTANCE CRITERIA - MANDATORY REQUIREMENTS
UNI EN 14917 : 2012 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
BS EN 60335-2-12 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES
10/30229550 DC : 0 BS EN 12451 REV - COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS
UNE-EN 13175:2015 LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
13/30288581 DC : 0 BS EN 10028-7 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 7: STAINLESS STEELS
09/30204183 DC : 0 BS EN 88-1 - PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 1: PRESSURE REGULATORS FOR INLET PRESSURES UP TO AND INCLUDING 500 MBAR
BS EN 12516-4 : 2014 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
14/30303759 DC : 0 BS EN 16282-7 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 7: INSTALLATION AND USE OF FIXED FIRE SUPPRESSION SYSTEMS
01/712575 DC : DRAFT SEP 2001 ISO 13849-2 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEM - PART 2: VALIDATION
98/716482 DC : DRAFT NOV 98 PREN 764-3 - PRESSURE EQUIPMENT - PART 3: DEFINITIONS AND PARTIES INVOLVED
04/30123986 DC : DRAFT OCT 2004 EN 50216-9 - POWER TRANSFORMER AND REACTOR FITTINGS - PART 9: OIL TO WATER HEAT EXCHANGER
08/30179182 DC : DRAFT MAY 2008 BS EN 1349 - INDUSTRIAL PROCESS CONTROL VALVES
09/30185942 DC : 0 BS EN 13835 - FOUNDING - AUSTENITIC CAST IRONS
BS EN 61010-2-012:2016 Safety requirements for electrical equipment for measurement, control and laboratory use Particular requirements for climatic and environmental testing and other temperature conditioning equipment
BS EN 13445-2 : 2014 UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
PREN 10028-2 : DRAFT 2014 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 2: NON-ALLOY AND ALLOY STEELS WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
PREN 378-2 : DRAFT 2013 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
99/715322 DC : DRAFT NOV 99 PREN 12952-11 - WATER-TUBE BOILERS - PART 11: REQUIREMENTS FOR LIMITING DEVICES AND SAFETY CIRCUITS OF THE BOILER AND ACCESORIES
UNI EN 16084 : 2011 REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS
I.S. EN ISO 15494:2015 PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT), CROSSLINKED POLYETHYLENE (PE-X), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 15494:2015)
UNI EN 3-10 : 2010 PORTABLE FIRE EXTINGUISHERS - PART 10: PROVISIONS FOR EVALUATING THE CONFORMITY OF A PORTABLE FIRE EXTINGUISHER TO EN 3-7
DIN EN 1515-4 E : 2010 FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
UNE-EN 16617:2015 Pipework - Corrugated metal hose assemblies for combustible gas - Performance requirements, testing and marking
UNE-CEN/TS 14972:2014 Fixed firefighting systems - Watermist systems - Design and installation
I.S. EN 12953-13:2012 SHELL BOILERS - PART 13: OPERATING INSTRUCTIONS
PREN 764-3 : DRAFT 98 PRESSURE EQUIPMENT - PART 3: DEFINITIONS AND PARTIES INVOLVED
I.S. EN 60335-2-23:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-23: PARTICULAR REQUIREMENTS FOR APPLIANCES FOR SKIN OR HAIR CARE
I.S. EN 60335-2-10:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-10: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES
I.S. EN 14879-6:2009 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
EN 10217-2:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
I.S. EN 15609:2012 LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT
I.S. EN 61010-2-012:2016 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT
S.R. CEN/TR 16395:2012 GAS INFRASTRUCTURE - CEN/TC 234 PRESSURE DEFINITIONS - GUIDELINE DOCUMENT
S.R. CEN/TR 16332:2012 NON-DESTRUCTIVE TESTING - INTERPRETATION OF EN ISO/IEC 17024 FOR NDT PERSONNEL CERTIFICATION APPLICATION
S.R. CEN/TR 15589:2014 NON DESTRUCTIVE TESTING - CODE OF PRACTICE FOR THE APPROVAL OF NDT PERSONNEL BY RECOGNISED THIRD PARTY ORGANISATIONS UNDER THE PROVISIONS OF DIRECTIVE 97/23/EC
I.S. EN 16282-7:2017 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 7: INSTALLATION AND USE OF FIXED FIRE SUPPRESSION SYSTEMS
NF EN ISO 4126-2 : 2003 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES
S.R. CEN/TS 764-8:2016 PRESSURE EQUIPMENT AND ASSEMBLIES - PART 8: PROOF TEST
I.S. EN 60335-2-12:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES
BS EN 474-1 : 2006 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
PREN 10222-5 : DRAFT 2012 STEEL FORGINGS FOR PRESSURE PURPOSES - PART 5: MARTENSITIC, AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEELS
PREN 10269 : DRAFT 2011 STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES
PREN 298 : DRAFT 2010 AUTOMATIC BURNER CONTROL SYSTEMS FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS
BS EN 10217-3:2002 Welded steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes
I.S. EN 60335-2-86:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-86: PARTICULAR REQUIREMENTS FOR ELECTRIC FISHING MACHINES
PREN 10273 : DRAFT 2013 HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
SAE J 2579 : 2013 STANDARD FOR FUEL SYSTEMS IN FUEL CELL AND OTHER HYDROGEN VEHICLES
NF EN 12953-4 : 2002 SHELL BOILERS - PART 4: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER
16/30326248 DC : 0 BS EN 12542 - LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE
DIN EN ISO 15494:2016-03 PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT), CROSSLINKED POLYETHYLENE (PE-X), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 15494:2015)
DIN EN 14071:2015-08 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT
13/30291465 DC : 0 BS EN 16696 - NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION - LEAK DETECTION BY MEANS OF ACOUSTIC EMISSION
EN 3-8:2006/AC:2007 PORTABLE FIRE EXTINGUISHERS - PART 8: ADDITIONAL REQUIREMENTS TO EN 3-7 FOR THE CONSTRUCTION, RESISTANCE TO PRESSURE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR
PREN 10028-4 : DRAFT 2014 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 4: NICKEL ALLOY STEELS WITH SPECIFIED LOW TEMPERATURE PROPERTIES
PREN 12952-1 : DRAFT 2014 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 1: GENERAL
PREN 14893 : DRAFT 2013 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
EN 10217-6:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
I.S. EN 3-8:2006 PORTABLE FIRE EXTINGUISHERS - PART 8: ADDITIONAL REQUIREMENTS TO EN 3-7 FOR THE CONSTRUCTION, RESISTANCE TO PRESSURE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR
ISO 16809:2017 Non-destructive testing — Ultrasonic thickness measurement
ISO 17089-2:2012 Measurement of fluid flow in closed conduits - Ultrasonic meters for gas — Part 2: Meters for industrial applications
ISO 11901-1:2003 Tools for pressing Gas springs Part 1: General specifications
ISO 11901-4:2014 Tools for pressing Gas springs Part 4: Gas springs with increased spring force and same built height
I.S. CEN TS 14421:2006 HOSE TAIL AND FERRULE FOR CRIMPING AND SWAGING
I.S. EN 60335-2-41:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-41: PARTICULAR REQUIREMENTS FOR PUMPS
I.S. EN 60335-2-84:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-84: PARTICULAR REQUIREMENTS FOR TOILETS
I.S. EN 60335-2-45:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-45: PARTICULAR REQUIREMENTS FOR PORTABLE HEATING TOOLS AND SIMILAR APPLIANCES (IEC 60335-2-45:2002 (EQV))
I.S. EN 60335-2-71:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-71: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEATING APPLIANCES FOR BREEDING AND REARING ANIMALS
EN 60335-2-47:2003/A11:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-47: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BOILING PANS (IEC 60335-2-47:2002)
I.S. EN 60335-2-82:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-82: PARTICULAR REQUIREMENTS FOR AMUSEMENT MACHINES AND PERSONAL SERVICE MACHINES
I.S. 291:2015 SELECTION, COMMISSIONING, INSTALLATION, INSPECTION AND MAINTENANCE OF PORTABLE FIRE EXTINGUISHERS
DIN EN ISO 21787 E : 2006 INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS
I.S. EN 60335-2-51:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-51: PARTICULAR REQUIREMENTS FOR STATIONARY CIRCULATION PUMPS FOR HEATING AND SERVICE WATER INSTALLATIONS (IEC 60335-2-51:2002 (EQV))
I.S. EN 15573:2008 EARTH-MOVING MACHINERY - DESIGN REQUIREMENTS FOR CIRCULATION ON THE ROAD
UNE-EN ISO 15883-1:2009 Washer-disinfectors - Part 1: General requirements, terms and definitions and tests (ISO 15883-1:2006)
EN 60335-2-59:2003/A2:2009 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-59: PARTICULAR REQUIREMENTS FOR INSECT KILLERS
EN 60335-2-82:2003/A1:2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-82: PARTICULAR REQUIREMENTS FOR AMUSEMENT MACHINES AND PERSONAL SERVICE MACHINES
BS EN 1949:2011+A1:2013 Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles
DIN EN 12952-14 E : 2004 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 14: REQUIREMENTS FOR FLUE GAS DENOX-SYSTEMS USING LIQUEFIED PRESSURIZED AMMONIA AND AMMONIA WATER SOLUTION
DIN EN ISO 16138:2006-06 INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS
DIN EN ISO 16136:2006-06 INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS
DIN EN 14180:2014-09 STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
DIN EN ISO 16137:2006-06 INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS
DIN EN ISO 16139:2006-06 INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS
DIN EN 1114-1:2012-01 Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders
DIN EN 14129:2014-05 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS
DIN EN 13799:2012-06 LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
BS EN 1564:2011 Founding. Ausferritic spheroidal graphite cast irons
BS EN 764-7:2002 Pressure equipment Safety systems for unfired pressure vessels
BS EN 473:2008 Non-destructive testing. Qualification and certification of NDT personnel. General principles
BS EN ISO 4126-4:2013 Safety devices for protection against excessive pressure Pilot-operated safety valves
BS EN 764-3:2002 Pressure equipment Definition of parties involved
BS EN 13789:2002 Industrial valves. Cast iron globe valves
BS EN 1092-4:2002 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated Aluminium alloy flanges
BS EN 12976-1:2017 Thermal solar systems and components. Factory made systems General requirements
BS EN 13624:2013 Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity in the medical area. Test method and requirements (phase 2, step 1)
BS EN 14129:2014 LPG Equipment and accessories. Pressure relief valves for LPG pressure vessels
ISO 21787:2006 Industrial valves Globe valves of thermoplastics materials
BS EN 12284:2003 Refrigerating systems and heat pumps. Valves. Requirements, testing and marking
BS EN 14222:2003 Stainless steel shell boilers
BS EN 1759-3:2003 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class designated Copper alloy flanges
BS EN 1146:2005 Respiratory protective devices. Selfcontained open-circuit compressed air breathing apparatus incorporating a hood for escape. Requirements, testing, marking
BS EN 14529:2005 Respiratory protective devices. Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only
BS EN 12953-7:2002 Shell boilers Requirements for firing systems for liquid and gaseous fuels for the boilers
BS EN ISO 15613:2004 Specification and qualification of welding procedures for metallic materials. Qualification based on pre-production welding test
BS EN 12542:2010 LPG equipment and accessories. Static welded steel cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m<sup>3</sup>. Design and manufacture
BS EN ISO 16137:2006 Industrial valves. Check valves of thermoplastic materials
BS EN 12186:2014 Gas infrastructure. Gas pressure regulating stations for transmission and distribution. Functional requirements
BS EN 12263:1999 Refrigerating systems and heat pumps. Safety switching devices for limiting the pressure. Requirements and tests
ISO 4126-5:2013 Safety devices for protection against excessive pressure Part 5: Controlled safety pressure relief systems (CSPRS)
ISO 15614-6:2006 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 6: Arc and gas welding of copper and its alloys
BS EN 13923:2005 Filament-wound FRP pressure vessels. Materials, design, manufacturing and testing
BS EN 60335-2-40 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS
BS EN 10305-6:2016 Steel tubes for precision applications. Technical delivery conditions Welded cold drawn tubes for hydraulic and pneumatic power systems
BS EN 12451:2012 Copper and copper alloys. Seamless, round tubes for heat exchangers
BS EN ISO 21787:2006 Industrial valves. Globe valves of thermoplastics materials
BS EN 12952-5:2011 Water-tube boilers and auxiliary installations Workmanship and construction of pressure parts of the boiler
BS EN 13133:2000 Brazing. Brazer approval
UNE-EN 12953-2:2013 Shell boilers - Part 2: Materials for pressure parts of boilers and accessories
BS EN ISO 17659:2004 Welding. Multilingual terms for welded joints with illustrations
BS EN 14276-2 : 2007 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
BS EN 12952-14:2004 Water-tube boilers and auxiliary installations Requirements for flue gas DENOX-systems using liquified pressurized ammonia and ammonia water solution
BS EN 12952-11:2007 Water-tube boilers and auxiliary installations Requirements for limiting devices of the boiler and accessories
BS EN 1515-2:2001 Flanges and their joints. Bolting Classification of bolt materials for steel flanges, PN designated
BS EN 13799:2012 LPG equipment and accessories. Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
BS EN 1057 : 2006 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR WATER AND GAS IN SANITARY AND HEATING APPLICATIONS
BS EN 12953-9:2007 Shell boilers Requirements for limiting devices of the boiler and accessories
BS EN 12953-8:2001 Shell boilers Requirements for safeguards against excessive pressure
BS EN 12953-5:2002 Shell boilers Inspection during construction, documentation and marking of pressure parts of the boiler
BS EN 12952-9:2002 Water-tube boilers and auxiliary installations Requirements for firing systems for pulverized solid fuels for the boiler
BS EN 764-4:2014 Pressure equipment Establishment of technical delivery conditions for metallic materials
11/30211394 DC : DRAFT MAR 2011 BS ISO 20100 - GASEOUS HYDROGEN - FUELLING STATIONS
EN 12953-5:2002 Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler
UNE-EN 1515-4:2010 Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
BS EN 12094-4:2004 Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for container valve assemblies and their actuators
ISO 15493:2003 Plastics piping systems for industrial applications Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) Specifications for components and the system Metric series
BS EN 13458-2:2002 Cryogenic vessels. Static vacuum insulated vessels Design, fabrication, inspection and testing
ISO 16137:2006 Industrial valves Check valves of thermoplastics materials
UNE-EN 10269:2014 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
BS EN 12953-1:2012 Shell boilers General
BS EN 13060 : 2014 SMALL STEAM STERILIZERS
UNE-EN 14125:2013 Thermoplastic and flexible metal pipework for underground installation at petrol filling stations
BS EN 14197-1:2003 Cryogenic vessels. Static non-vacuum insulated vessels Fundamental requirements
ISO 15613:2004 Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test
BS EN 12953-6:2011 Shell boilers Requirements for equipment for the boiler
BS EN ISO 16136:2006 Industrial valves. Butterfly valves of thermoplastic materials
BS EN 12952-6:2011 Water-tube boilers and auxiliary installations Inspection during construction; documentation and marking of pressure parts of the boiler
BS ISO 19859:2016 Gas turbine applications. Requirements for power generation
EN 14276-1:2006+A1:2011 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
BS EN 1643:2014 Safety and control devices for gas burners and gas burning appliances. Valve proving systems for automatic shut-off valves
ISO 15614-4:2005 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 4: Finishing welding of aluminium castings
ISO 16139:2006 Industrial valves Gate valves of thermoplastics materials
BS EN 14276-1 : 2006 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
BS EN 1290:1998 Non-destructive examination of welds. Magnetic particle examination of welds
BS EN 14180:2014 Sterilizers for medical purposes. Low temperature steam and formaldehyde sterilizers. Requirements and testing
BS EN 14125:2013 Thermoplastic and flexible metal pipework for underground installation at petrol filling stations
UNE-EN 12420:2015 Copper and copper alloys - Forgings
UNE-EN 1594:2014 Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements
BS EN 12452:2012 Copper and copper alloys. Rolled, finned, seamless tubes for heat exchangers
BS EN 12952-13:2003 Water-tube boilers and auxiliary installations Requirements for flue gas cleaning systems
EN 14276-2:2007+A1:2011 Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements
BS EN 13831:2007 Closed expansion vessels with built-in diaphragm for installation in water
BS EN 3-9:2006 Portable fire extinguishers Additional requirements to EN 3-7 for pressure resistance of CO2 extinguishers
BS EN 1983:2013 Industrial valves. Steel ball valves
BS EN 12516-2:2014 Industrial valves. Shell design strength Calculation method for steel valve shells
BS EN ISO 15614-4:2005 Specification and qualification of welding procedures for metallic materials. Welding procedure test Finishing welding of aluminium castings
BS EN 1092-3:2003 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated Copper alloy flanges
BS EN ISO 15614-8:2016 Specification and qualification of welding procedures for metallic materials. Welding procedure test Welding of tubes to tube-plate joints
BS EN 12952-8:2002 Water-tube boilers and auxiliary installations Requirements for firing systems for liquid and gaseous fuels for the boiler
UNE-EN 12952-3:2012 Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler
UNE-EN 1114-1:2012 Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders
DIN EN ISO 21787:2006-06 INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS
ISO 10931:2005 Plastics piping systems for industrial applications Poly(vinylidene fluoride) (PVDF) Specifications for components and the system
EN 1515-4:2009 Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
EN 15154-3:2009 Emergency safety showers - Part 3: Non plumbed-in body showers
EN 764-3:2002 Pressure equipment - Part 3: Definition of parties involved
EN 13799:2012 LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
EN 15154-4:2009 Emergency safety showers - Part 4: Non plumbed-in eyewash units
EN 15573:2008 Earth-moving machinery - Design requirements for circulation on the road
EN ISO 16139:2006 Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006)
EN 1866-3:2013 Mobile fire extinguishers - Part 3: Requirements for the assembly, construction and pressure resistance of CO2 extinguishers which comply with the requirements of EN 1866-1
EN 14893:2014 LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres
EN 14585-1:2006 Corrugated metal hose assemblies for pressure applications - Part 1: Requirements
EN 764-7:2002/AC:2006 PRESSURE EQUIPMENT - PART 7: SAFETY SYSTEMS FOR UNFIRED PRESSURE EQUIPMENT
EN ISO 16135:2006 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006)
EN 15424:2007 Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices
EN 13835:2012 Founding - Austenitic cast irons
EN ISO 9712:2012 Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012)
EN 14529:2005 Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only
EN 16678:2015 Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
EN 1626:2008 Cryogenic vessels - Valves for cryogenic service
EN 15001-1:2009 Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
EN 13648-1:2008 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1: Safety valves for cryogenic service
EN ISO 4126-4:2013 Safety devices for protection against excessive pressure - Part 4: Pilot-operated safety valves (ISO 4126-4:2013)
EN ISO 4126-7:2013/A1:2016 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 7: COMMON DATA (ISO 4126-7:2013/AMD 1:2016)
EN 13709:2010 Industrial valves - Steel globe and globe stop and check valves
EN 14197-1:2003 Cryogenic vessels - Static non-vacuum insulated vessels - Part 1: Fundamental requirements
EN 16340:2014 Safety and control devices for burners and appliances burning gaseous or liquid fuels - Combustion product sensing devices
EN 1564:2011 Founding - Ausferritic spheroidal graphite cast irons
EN 3-9:2006/AC:2007 PORTABLE FIRE EXTINGUISHERS - PART 9: ADDITIONAL REQUIREMENTS T0 EN 3-7 FOR PRESSURE RESISTANCE OF CO[2] EXTINGUISHERS
EN ISO 16136:2006 Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006)
EN ISO 4126-5:2013/A1:2016 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 5: CONTROLLED SAFETY PRESSURE RELIEF SYSTEMS (CSPRS) (ISO 4126-5:2013/AMD 1:2016)
EN 16643:2016 Rubber and plastics hoses and hose assemblies - Non-bonded fluoroplastic lined (e.g. PTFE) hoses and hose assemblies for liquid and gaseous chemicals - Specification
EN ISO 10931:2005/A1:2015 Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system (ISO 10931:2005/FDAM 1:2015)
EN 16713-2 : 2016 DOMESTIC SWIMMING POOLS - WATER SYSTEMS - PART 2: CIRCULATION SYSTEMS - REQUIREMENTS AND TEST METHODS
EN 14983:2007 Explosion prevention and protection in underground mines - Equipment and protective systems for firedamp drainage
EN 14382:2005+A1:2009/AC:2009 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
EN ISO 25424:2011 Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2009)
EN 1866-2:2014 Mobile fire extinguishers - Part 2: Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1
EN 14879-6:2009 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 6: Combined linings with tile and brick layers
EN 1983:2013 Industrial valves - Steel ball valves
EN 13648-3:2002 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3: Determination of required discharge - Capacity and sizing
EN 14197-3:2004/A1:2005 CRYOGENIC VESSELS - STATIC NON-VACUUM INSULATED VESSELS - PART 3: OPERATIONAL REQUIREMENTS
EN 1092-4:2002 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges
EN 13648-2:2002 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices for cryogenic service
EN 14125:2013 Thermoplastic and flexible metal pipework for underground installation at petrol filling stations
EN 1515-2:2001 Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated
EN 16084:2011 Refrigerating systems and heat pumps - Qualification of tightness of components and joints
EN 14129:2014 LPG Equipment and accessories - Pressure relief valves for LPG pressure vessels
EN 1594:2013 Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements
EN 1797:2001 Cryogenic vessels - Gas/material compatibility
EN 1984:2010 Industrial valves - Steel gate valves
EN 12334:2001/A1:2004 INDUSTRIAL VALVES - CAST IRON CHECK VALVES
EN ISO 15493:2003/A1:2017 Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series - Amendment 1 (ISO 15493:2003/Amd 1:2016 + Cor 1:2004)
EN 13789:2010 Industrial valves - Cast iron globe valves
EN 334:2005+A1:2009 Gas pressure regulators for inlet pressures up to 100 bar
EN 1713:1998/A2:2003 NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - CHARACTERIZATION OF INDICATIONS IN WELDS
EN ISO 15614-8:2016 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2016)
EN 1435:1997/A2:2003 NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING OF WELDED JOINTS
EN 13923:2005 Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing
EN 14570:2014 LPG equipment and accessories - Equipping of overground and underground LPG vessels
EN ISO 16138:2006 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006)
EN 3-10:2009 Portable fire extinguishers - Part 10: Provisions for evaluating the conformity of a portable fire extinguisher to EN 3-7
EN ISO 15614-6:2006 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006)
EN 1759-3:2003/AC:2004 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED - PART 3: COPPER ALLOY FLANGES
EN 14197-2:2003/AC:2006 CRYOGENIC VESSELS - STATIC NON-VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING
EN 14180:2014 Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing
EN 13831:2007 Closed expansion vessels with built in diaphragm for installation in water
EN 16474:2015 Plastics and rubber machines - Tyre curing machines - Safety requirements
EN ISO 15614-5:2004 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2004)
EN ISO 15614-4:2005/AC:2007 SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 4: FINISHING WELDING OF ALUMINIUM CASTINGS
EN 14075:2002/A1:2004 STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] AND FOR INSTALLATION UNDERGROUND - DESIGN AND MANUFACTURE
EN ISO 16137:2006 Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006)
EN 1714:1997/A2:2003 NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING OF WELDED JOINTS
EN 764-5:2014 Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification
EN 1643:2014 Safety and control devices for gas burners and gas burning appliances - Valve proving systems for automatic shut-off valves
EN 16617 : 2015 PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING
EN 764-4:2014 Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials
15/30315105 DC : 0 BS EN 16820 - HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY WITH HOSES OF NON-METALLIC MATERIALS - ELASTOMERIC HOSES WITH OR WITHOUT LINER
EI GUIDE. DESIGN & OPER. HEAT EXCHANGERS : 2015-12 GUIDELINES FOR THE SAFE DESIGN AND OPERATION OF SHELL AND TUBE HEAT EXCHANGERS TO WITHSTAND THE IMPACT OF TUBE FAILURE
UNI 11513 : 2013 CHECKING THE CALIBRATION OF THE SAFETY VALVES IN OPERATION BY JACKS
DIN EN 15609 E : 2012 LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT
UNE-EN 14893:2014 LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres
CEN/TR 15120:2013 Tanks for transport of dangerous goods - Guidance and recommendations for loading, transport and unloading
09/30122688 DC : DRAFT OCT 2009 BS EN 13480-2:2002/A1:2002+A1 - METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS
09/30187760 DC : DRAFT JULY 2009 BS EN 1562 - FOUNDING - MALLEABLE CAST IRONS
BS EN 15154-4:2009 Emergency safety showers Non plumbed-in eyewash units
DIN EN 3-10:2010-03 Portable fire extinguishers - Part 10: Provisions for evaluating the conformity of a portable fire extinguisher to EN 3-7
DIN EN 15154-4:2009-07 EMERGENCY SAFETY SHOWERS - PART 4: NON PLUMBED-IN EYEWASH UNITS
I.S. EN 15154-4:2009 EMERGENCY SAFETY SHOWERS - PART 4: NON PLUMBED-IN EYEWASH UNITS
14/30312170 DC : 0 BS EN 10028-3 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 3: WELDABLE FINE GRAIN STEELS, NORMALIZED
08/30190311 DC : 0 BS EN 12953-6 - SHELL BOILERS - PART 6: REQUIREMENTS FOR EQUIPMENT FOR THE BOILER
PD CEN/TR 15444:2006 Transportable gas cylinders. Gas cylinders conforming to the TPED to be used for PED applications. Applicability and justifications
PREN ISO 4126-5 : DRAFT 2009 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 5: CONTROLLED SAFETY PRESSURE-RELIEF SYSTEMS (CSPRS)
PREN 1563 : DRAFT 2015 FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS
PD CEN/TR 15120:2013 Tanks for transport of dangerous goods. Guidance and recommendations for loading, transport and unloading
PREN 88-2 : DRAFT 2014 SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - PART 2: PRESSURE REGULATORS FOR INLET PRESSURES ABOVE 50 KPA UP TO AND INCLUDING 500 KPA AND ASSOCIATED SAFETY DEVICES
14/30312182 DC : 0 BS EN 10028-1 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
I.S. EN 473:2008 NON-DESTRUCTIVE TESTING - QUALIFICATION AND CERTIFICATION OF NDT PERSONNEL - GENERAL PRINCIPLES
BS EN 16282-7:2017 Equipment for commercial kitchens. Components for ventilation in commercial kitchens Installation and use of fixed fire suppression systems
I.S. EN 15154-3:2009 EMERGENCY SAFETY SHOWERS - PART 3: NON PLUMBED-IN BODY SHOWERS
PREN 10217-2 : DRAFT 2009 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
BS EN 13445-1 : 2014 UNFIRED PRESSURE VESSELS - PART 1: GENERAL
11/30249911 DC : 0 BS EN 50465 - GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
13/30271116 DC : 0 BS EN 1594 - GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS
DIN EN 12952-18:2013-01 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 18: OPERATING INSTRUCTIONS
BS ISO 11901-3:2014 Tools for pressing. Gas springs Gas spring with increased spring force and compact built height
00/708224 DC : DRAFT MAY 2000 BS EN ISO 15614-10 - SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 10: HYPERBARIC DRY WELDING
09/30207505 DC : 0 BS EN 10217-2 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
S.R. CEN GUIDE 14:2010 COMMON POLICY GUIDANCE FOR ADDRESSING STANDARDIZATION ON QUALIFICATION OF PROFESSIONS AND PERSONNEL
03/119783 DC : DRAFT DEC 2003 BS EN 13445-8 - UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS
15/30315109 DC : 0 BS EN 16821 - HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY WITH HOSES OF NON-METALLIC MATERIALS - SILICONE RUBBER HOSES
BS EN 15001-1:2009 Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing
BS EN ISO 4126-1 : 2013 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 1: SAFETY VALVES (ISO 4126-1:2013)
04/30046221 DC : 0 PREN 13121-3 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP
09/30207508 DC : 0 BS EN 10217-3 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
I.S. EN 16474:2015 PLASTICS AND RUBBER MACHINES - TYRE CURING MACHINES - SAFETY REQUIREMENTS
DIN EN 1515-4:2010-04 Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
I.S. EN 50156-2:2015 ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 2: REQUIREMENTS FOR DESIGN, DEVELOPMENT AND TYPE APPROVAL OF SAFETY DEVICES AND SUBSYSTEMS
15/30324988 DC : 0 BS EN 10305-6 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
10/30216702 DC : 0 BS EN 12953-1 - SHELL BOILERS - PART 1: GENERAL
07/30168419 DC : 0 BS EN 1982 - COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS
DIN EN 12953-13:2012-04 Shell boilers - Part 13: Operating instructions
PREN 13445-8 : DRAFT 2013 UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS
17/30351224 DC : 0 BS EN 14276-1 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
CEN/TR 15339-1:2014 Thermal spraying - Safety requirements for thermal spraying equipment - Part 1: General requirements
PD CEN/TS 764-8:2016 Pressure equipment and assemblies Proof test
CEI EN 50131-8 : 2010 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 8: SECURITY FOG DEVICE/SYSTEMS
CSA C22.2 No. 61010-2-012 : 2017 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT
PREN 10222-2 : DRAFT 2012 STEEL FORGINGS FOR PRESSURE PURPOSES - PART 2: FERRITIC AND MARTENSITIC STEELS WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
PREN 13445-5 : DRAFT 2011 UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING
DIN EN 16617 E : 2015 PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING
DIN 28124-3:2013-07 Manhole closures - Part 3: For pressure, covered
PREN 14276-1 : DRAFT 2017 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
EN 60335-2-73 : 2003 AMD 2 2009 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-73: PARTICULAR REQUIREMENTS FOR FIXED IMMERSION HEATERS
I.S. EN 60335-2-99:2003/A1:2019 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-99: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC HOODS
I.S. EN 16713-2:2016 DOMESTIC SWIMMING POOLS - WATER SYSTEMS - PART 2: CIRCULATION SYSTEMS - REQUIREMENTS AND TEST METHODS
UNE-EN 13445-2:2015 Unfired pressure vessels - Part 2: Materials
NF EN 60730 2-8 : 2002 AMD 1 2003 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PARTICULAR REQUIREMENTS FOR ELECTRICALLY OPERATED WATER VALVES, INCLUDING MECHANICAL REQUIREMENTS
I.S. EN 60335-2-99:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-99: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC HOODS
DIN EN 13175:2015-02 LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
UNI EN 15609 : 2012 LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT
UNE-EN 50216-10:2010 Power transformer and reactor fittings - Part 10: Oil-to-air heat exchangers
CEI EN 50216-10 : 2010 POWER TRANSFORMER AND REACTOR FITTINGS - PART 10: OIL-TO-AIR HEAT EXCHANGERS
UNE-EN 13060:2015 Small steam sterilizers
UNE-EN 14917:2011 Metal bellows expansion joints for pressure applications
UNE-EN ISO 25424:2011 Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2009)
ISO 21789:2009 Gas turbine applications — Safety
DIN EN 12952-3:2012-03 Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler
ISO 4126-1:2013 Safety devices for protection against excessive pressure Part 1: Safety valves
EN 10217-4:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
I.S. 3216:2010 CODE OF PRACTICE - BULK STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) - (EDITION 2)
I.S. EN 60335-2-73:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-73: PARTICULAR REQUIREMENTS FOR FIXED IMMERSION HEATERS
DIN EN 764-4:2015-03 PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS
BS EN 1949 : 2011 SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES
DIN EN 14678-1:2013-06 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
DIN EN 12953-2:2012-05 Shell boilers - Part 2: Materials for pressure parts of boilers and accessories
DIN EN 13554:2011-04 Non-destructive testing - Acoustic emission testing - General principles
DIN EN 12953-6:2011-05 Shell boilers - Part 6: Requirements for equipment for the boiler
DIN EN 14222 E : 2003 STAINLESS STEEL SHELL BOILERS
DIN EN 764-5:2015-03 PRESSURE EQUIPMENT - PART 5: INSPECTION DOCUMENTATION OF METALLIC MATERIALS AND COMPLIANCE WITH THE MATERIAL SPECIFICATION
DIN EN 14125:2013-09 THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS
BS EN 10269:2013 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
BS EN 13458-3:2003 Cryogenic vessels. Static vacuum insulated vessels Operational requirements
BS EN ISO 15614-6:2006 Specification and qualification of welding procedures for metallic materials. Welding procedure test Arc and gas welding of copper and its alloys
BS EN ISO 10931 : 2005 PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLY(VINYLIDENE FLUORIDE) (PVDF) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM
BS EN 12953-2:2012 Shell boilers Materials for pressure parts of boilers and accessories
BS EN 13121-2:2003 GRP tanks and vessels for use above ground Composite materials. Chemical resistance
BS EN 1114-1:2011 Plastics and rubber machines. Extruders and extrusion lines Safety requirements for extruders
BS EN 14678-1:2013 LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations Dispensers
DD ISO/TS 20100:2008 Gaseous hydrogen. Fuelling stations
BS EN ISO 15493 : 2003 PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS), UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) AND CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES (ISO 15493:2003)
BS EN 14893:2014 LPG equipment and accessories. Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres
BS EN 14585-1:2006 Corrugated metal hose assemblies for pressure applications Requirements
ISO 16138:2006 Industrial valves Diaphragm valves of thermoplastics materials
BS EN 12778:2002 Cookware. Pressure cookers for domestic use
ISO 15614-8:2016 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 8: Welding of tubes to tube-plate joints
BS 8458:2015 Fixed fire protection systems. Residential and domestic watermist systems. Code of practice for design and installation
BS EN 12952-3:2011 Water-tube boilers and auxiliary installations Design and calculation for pressure parts of the boiler
BS EN 13458-1:2002 Cryogenic vessels. Static vacuum insulated vessels Fundamental requirements
BS EN 12953-12:2003 Shell boilers Requirements for grate firing systems for solid fuels for the boiler
ISO 17659:2002 Welding — Multilingual terms for welded joints with illustrations
BS EN 12952-10:2002 Water-tube boilers and auxiliary installations Requirements for safeguards against excessive pressure
EN 60335-2-81:2003/A2:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-81: PARTICULAR REQUIREMENTS FOR FOOT WARMERS AND HEATING MATS (IEC 60335-2-81:2002/A2:2011)
CEN/TS 14421 : 2006 HOSE TAIL AND FERRULE FOR CRIMPING AND SWAGING
EN 473:2008 Non-destructive testing - Qualification and certification of NDT personnel - General principles
CEN/TR 14585-2:2006 Corrugated metal hose assemblies for pressure applications - Part 2: Guidance on the use of conformity assessment procedures
EN 12952-8:2002 Water-tube boilers and auxiliary installations - Part 8: Requirements for firing systems for liquid and gaseous fuels for the boiler
EN 126:2012 Multifunctional controls for gas burning appliances
EN 60335-2-71 : 2003 AMD 1 2007 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-71: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEATING APPLIANCES FOR BREEDING AND REARING ANIMALS
DIN 2876:1993-05 ENAMELLED FLANGED STEEL PIPES AND FITTINGS - TECHNICAL DELIVERY CONDITIONS
EN 16830:2017 Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Temperature Control function
EN ISO 15883-1:2009/A1:2014 WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006/AMD 1:2014)
BS 5306-3:2009 Fire extinguishing installations and equipment on premises Commissioning and maintenance of portable fire extinguishers. Code of practice
DIN EN 473:2001-03 NON-DESTRUCTIVE TESTING - QUALIFICATION AND CERTIFICATION OF NDT PERSONNEL - GENERAL PRINCIPLES
EN 60335-2-80:2003/A2:2009 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-80: PARTICULAR REQUIREMENTS FOR FANS
EN 12284 : 2003 REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING
EN 12952-6:2011 Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler
DIN EN 12110:2003-05 TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS
NF EN ISO 16136 : 2006 INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTIC MATERIALS
EN 60335-2-88:2002 Household and similar electrical appliances - Safety - Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems
EN 12952-10:2002 Water-tube boilers and auxiliary installations - Part 10: Requirements for safeguards against excessive pressure
EN 60335-2-91:2003 Household and similar electrical appliances - Safety - Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers
EN 50156-2:2015 Electrical equipment for furnaces and ancillary equipment - Part 2: Requirements for design, development and type approval of safety devices and subsystems
DIN EN 12094-4:2004-10 Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators; German version EN 12094-4:2004
EN 12953-9:2007 Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories
NF EN ISO 21787 : 2006 INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTIC MATERIALS
EN 12452:2012 Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers
EN 12953-6:2011 Shell Boilers - Part 6: Requirements for equipment for the boiler
EN 12094-4:2004 Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators
EN 12110:2014 Tunnelling machines - Air locks - Safety requirements
NF EN ISO 16135 : 2006 INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTIC MATERIALS
EN 60335-2-10:2003/A1:2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-10: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES
EN 13371:2001 Cryogenic vessels - Couplings for cryogenic service
EN 60335-2-51:2003/A2:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-51: PARTICULAR REQUIREMENTS FOR STATIONARY CIRCULATION PUMPS FOR HEATING AND SERVICE WATER INSTALLATIONS (IEC 60335-2-51:2002/A2:2011)
EN 60335-2-23:2003/A2:2015 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-23: PARTICULAR REQUIREMENTS FOR APPLIANCES FOR SKIN OR HAIR CARE (IEC 60335-2-23:2003/A2:2012, MODIFIED)
EN 13121-2:2003 GRP tanks and vessels for use above ground - Part 2: Composite materials - Chemical resistance
EN 1949:2011+A1:2013 Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles
EN 60335-2-45:2002/A2:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-45: PARTICULAR REQUIREMENTS FOR PORTABLE HEATING TOOLS AND SIMILAR APPLIANCES (IEC 60335-2-45:2002/A2:2011)
EN 50216-10:2009 Power transformer and reactor fittings - Part 10: Oil-to-air heat exchangers
CEN/TR 15444:2006 Transportable gas cylinders - Gas cylinders conforming to the TPED to be used for PED applications - Applicability and justifications
EN 60335-2-40:2003/A13:2012/AC:2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS
EN 50216-9:2009 Power transformer and reactor fittings - Part 9: Oil-to-water heat exchangers
DIN EN 14222:2003-09 Stainless steel shell boilers
DIN EN 14983:2007-06 Explosion prevention and protection in underground mines - Equipment and protective systems for firedamp drainage
ASME STP-NU-078 : 2016 COMPARISON REPORT ON WELDING QUALIFICATION AND WELDING QUALITY ASSURANCE
ASME STP-PT-003 : 2005 HYDROGEN STANDARDIZATION INTERIM REPORT FOR TANKS, PIPING, AND PIPELINES
NF EN ISO 15611 : 2004 SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BASED ON PREVIOUS WELDING EXPERIENCE
ASME STP-PT-002 : 2005 ASME SECTION 1 PED GUIDE - SUPPLEMENT TO GUIDE FOR ASME STAMP HOLDERS USE OF ASME SECTION 1 TO MEET THE EC PRESSURE EQUIPMENT DIRECTIVE (97/23/EC)
UNE-EN 14276-1:2007 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements

View more information
Free

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.