16/30342040 DC : 0
Current
Current
The latest, up-to-date edition.
BS EN 13941-2 - DISTRICT HEATING PIPES - DESIGN AND INSTALLATION OF THERMAL INSULATED BONDED SINGLE AND TWIN PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PART 2: INSTALLATION
Available format(s)
Hardcopy , PDF
Language(s)
English
Publisher
£20.00
Excluding VAT
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions and symbols
4 Procurement
5 General requirements
6 Required input information
7 Quality control
8 Site preparation
9 Trenching
10 Transport and storage of pre-insulated pipe elements
and other materials
11 Pipe laying
12 Backfilling
13 Commissioning
14 Operation
15 Documentation
Annex A (informative) - Venting and Draining
Annex B (informative) - Recommendations for HDD
Annex C (informative) - Qualification of fitters installing
joints in pre-insulated bonded pipe networks
Annex D (informative) - Quality control program and
documentation
Annex E (normative) - Commissioning
Annex F (informative) - Operation
Bibliography
BS EN 13941-2.
| Committee |
RHE/9
|
| DocumentType |
Draft
|
| Pages |
96
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Standards | Relationship |
| PREN 13941-2 : DRAFT 2016 | Identical |
| ISO 3834-1:2005 | Quality requirements for fusion welding of metallic materials — Part 1: Criteria for the selection of the appropriate level of quality requirements |
| ISO 17636-1:2013 | Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO 14341:2010 | Welding consumables — Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels — Classification |
| EN ISO 3834-3:2005 | Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2005) |
| EN ISO 5817:2014 | Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014) |
| PREN 13941-1 : DRAFT 2016 | DISTRICT HEATING PIPES - DESIGN AND INSTALLATION OF THERMAL INSULATED BONDED SINGLE AND TWIN PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PART 1: DESIGN |
| ISO 11666:2010 | Non-destructive testing of welds — Ultrasonic testing — Acceptance levels |
| EN ISO 3452-1:2013 | Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, Corrected version 2014-05-01) |
| ISO 23277:2015 | Non-destructive testing of welds — Penetrant testing — Acceptance levels |
| ISO 3834-4:2005 | Quality requirements for fusion welding of metallic materials — Part 4: Elementary quality requirements |
| EN ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004) |
| ISO 9712:2012 | Non-destructive testing — Qualification and certification of NDT personnel |
| ISO 15610:2003 | Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables |
| EN ISO 10675-1:2016 | Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys (ISO 10675-1:2016) |
| EN ISO 3834-4:2005 | Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2005) |
| ISO 14732:2013 | Welding personnel — Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials |
| ISO 14174:2012 | Welding consumables — Fluxes for submerged arc welding and electroslag welding — Classification |
| EN ISO 14171:2016 | Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels - Classification (ISO 14171:2016) |
| ISO 2560:2009 | Welding consumables — Covered electrodes for manual metal arc welding of non-alloy and fine grain steels — Classification |
| ISO 14731:2006 | Welding coordination — Tasks and responsibilities |
| EN 12224:2000 | Geotextiles and geotextile-related products - Determination of the resistance to weathering |
| EN ISO 4063:2010 | Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01) |
| EN ISO 23278 | Non-destructive testing of welds - Magnetic particle testing - Acceptance levels (ISO 23278:2015) |
| ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
| EN ISO 23277:2015 | Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015) |
| EN 448:2015 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| EN ISO 14732:2013 | Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013) |
| ISO 23278:2015 | Non-destructive testing of welds — Magnetic particle testing — Acceptance levels |
| ISO 5579:2013 | Non-destructive testing — Radiographic testing of metallic materials using film and X- or gamma rays — Basic rules |
| EN ISO 9712:2012 | Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012) |
| ISO 17640:2017 | Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment |
| ISO 5817:2014 | Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
| ISO 3452-1:2013 | Non-destructive testing — Penetrant testing — Part 1: General principles |
| ISO 16810:2012 | Non-destructive testing — Ultrasonic testing — General principles |
| EN ISO 9934-1:2016 | Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2016) |
| EN ISO 14174:2012 | Welding consumables - Fluxes for submerged arc welding and electroslag welding - Classification (ISO 14174:2012) |
| EN 14419:2009 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Surveillance systems |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| EN ISO 16810:2014 | Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012) |
| ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 1: Arc welding |
| EN ISO 17637:2016 | Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2016) |
| EN ISO 5579:2013 | Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules (ISO 5579:2013) |
| ISO 14171:2016 | Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels — Classification |
| EN ISO 14341:2011 | Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification (ISO 14341:2010) |
| EN ISO 2560:2009 | Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2009) |
| ISO 6761:1981 | Steel tubes — Preparation of ends of tubes and fittings for welding |
| ISO 17636-2:2013 | Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors |
| ISO 17632:2015 | Welding consumables — Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels — Classification |
| CEN/TR 16911:2015 | Heat meters - Recommendations for circulation water in industrial and district heating systems and their operation |
| ISO 9934-1:2016 | Non-destructive testing — Magnetic particle testing — Part 1: General principles |
| EN 489:2009 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| EN ISO 14731:2006 | Welding coordination - Tasks and responsibilities (ISO 14731:2006) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| CEN ISO/TR 15608:2017 | Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2017) |
| EN ISO 17632:2015 | Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification (ISO 17632:2015) |
| ISO 17637:2016 | Non-destructive testing of welds — Visual testing of fusion-welded joints |
| EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
| EN ISO 17636-2:2013 | Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2013) |
| EN ISO 3834-1:2005 | Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2005) |
| ISO 14175:2008 | Welding consumables — Gases and gas mixtures for fusion welding and allied processes |
| ISO 15609-2:2001 | Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 2: Gas welding |
| EN 13018:2016 | Non-destructive testing - Visual testing - General principles |
| EN ISO 18275:2012 | Welding consumables - Covered electrodes for manual metal arc welding of high-strength steels - Classification (ISO 18275:2011) |
| ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials — Qualification based on pre-production welding test |
| ISO 4063:2009 | Welding and allied processes — Nomenclature of processes and reference numbers |
| EN ISO 636:2017 | Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification (ISO 636:2017) |
| EN ISO 15610:2003 | Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2003) |
| EN ISO 17636-1:2013 | Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013) |
| EN ISO 9606-1:2017 | Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) |
| EN ISO 17638:2016 | Non-destructive testing of welds - Magnetic particle testing (ISO 17638:2016) |
| EN 253:2009+A2:2015 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene |
| ISO 10675-1:2016 | Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 1: Steel, nickel, titanium and their alloys |
| ISO 636:2017 | Welding consumables — Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels — Classification |
| ISO 18275:2011 | Welding consumables — Covered electrodes for manual metal arc welding of high-strength steels — Classification |
| ISO 17638:2016 | Non-destructive testing of welds — Magnetic particle testing |
| ISO 3834-3:2005 | Quality requirements for fusion welding of metallic materials — Part 3: Standard quality requirements |
| EN 10253-2:2007 | Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
| EN ISO 14175:2008 | Welding consumables - Gases and gas mixtures for fusion welding and allied processes (ISO 14175:2008) |
Summarise
£20.00
Excluding VAT
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.