ISO 9223:2012
|
Corrosion of metals and alloys — Corrosivity of atmospheres — Classification, determination and estimation
|
EN ISO 4628-2:2016
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016)
|
EN 13523-11:2011
|
Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test)
|
EN 10048:1996
|
Hot rolled narrow steel strip - Tolerances on dimensions and shape
|
EN 10051:2010
|
Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape
|
EN 10140:2006
|
Cold rolled narrow steel strip - Tolerances on dimensions and shape
|
EN 10079:2007
|
Definition of steel products
|
EN 13523-12:2017
|
Coil coated metals - Test methods - Part 12: Resistance to scratching
|
EN 10027-2:2015
|
DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
|
EN 13523-14:2014
|
Coil coated metals - Test methods - Part 14: Chalking (Helmen method)
|
EN 10152:2017
|
Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions
|
EN 13523-10:2017
|
Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
|
EN 13523-26:2014
|
Coil coated metals - Test methods - Part 26: Resistance to condensation of water
|
EN ISO 1043-1:2011/A1:2016
|
PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016)
|
EN 13523-6:2002
|
Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test)
|
EN 10268:2006+A1:2013
|
COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
|
EN 13523-24:2017
|
Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking
|
ISO 2808:2007
|
Paints and varnishes Determination of film thickness
|
EN ISO 11997-1:2017
|
Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humid (ISO 11997-1:2017)
|
EN 13523-9:2014
|
Coil coated metals - Test methods - Part 9: Resistance to water immersion
|
EN 13523-0:2014
|
Coil coated metals - Test methods - Part 0: General introduction
|
EN 10111:2008
|
Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions
|
EN 13523-3:2014
|
Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
|
EN ISO 2409:2013
|
Paints and varnishes - Cross-cut test (ISO 2409:2013)
|
EN 10346:2015
|
Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions
|
EN ISO 9227:2017
|
Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017)
|
EN 10139:2016
|
Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions
|
EN 10025-1:2004
|
Hot rolled products of structural steels - Part 1: General technical delivery conditions
|
PREN 10338 : DRAFT 2013
|
HOT ROLLED AND COLD ROLLED NON-COATED FLAT PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
|
EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
|
EN 10131:2006 (edition 2)
|
Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape
|
EN ISO 4628-4:2016
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016)
|
EN 13523-21:2017
|
Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels
|
ISO 4628-4:2016
|
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 4: Assessment of degree of cracking
|
EN 13523-23:2015
|
Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide
|
ISO 2810:2004
|
Paints and varnishes Natural weathering of coatings Exposure and assessment
|
EN ISO 8044:2015
|
Corrosion of metals and alloys - Basic terms and definitions (ISO 8044:2015)
|
ISO 12944-2:2017
|
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments
|
EN 10143:2006 (edition 2)
|
Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape
|
EN 13523-22:2017
|
Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison
|
ISO 4628-5:2016
|
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking
|
EN 10021:2006
|
General technical delivery conditions for steel products
|
ISO 11997-1:2017
|
Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humid
|
ISO 8044:2015
|
Corrosion of metals and alloys Basic terms and definitions
|
EN 13523-18:2002
|
Coil coated metals - Test methods - Part 18: Resistance to staining
|
EN 13523-27:2017
|
Coil coated metals - Test methods - Part 27: Resistance to humid poultice (Cataplasm test)
|
EN 10204:2004
|
Metallic products - Types of inspection documents
|
ISO 2815:2003
|
Paints and varnishes Buchholz indentation test
|
EN 10088-4:2009
|
Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
|
EN 10025-2:2004/AC:2005
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
|
ISO 4997:2015
|
Cold-reduced carbon steel sheet of structural quality
|
EN 13523-5:2014
|
Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test)
|
EN 13523-19:2011
|
Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing
|
EN 13523-8:2017
|
Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)
|
EN 10130:2006
|
Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions
|
ISO 4618:2014
|
Paints and varnishes — Terms and definitions
|
EN 10027-1:2016
|
Designation systems for steels - Part 1: Steel names
|
EN ISO 2815:2003
|
Paints and varnishes - Buchholz indentation test (ISO 2815:2003)
|
ISO 9227:2017
|
Corrosion tests in artificial atmospheres — Salt spray tests
|
EN 13523-7:2014
|
Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
|
EN 13523-1:2017
|
Coil coated metals - Test methods - Part 1: Film thickness
|
EN 13523-25:2014
|
Coil coated metals - Test methods - Part 25: Resistance to humidity
|
EN ISO 2810:2004
|
Paints and varnishes - Natural weathering of coatings - Exposure and assessment (ISO 2810:2004)
|
EN 10020:2000
|
Definition and classification of grades of steel
|
EN 606:2004
|
BAR CODING - TRANSPORT AND HANDLING LABELS FOR STEEL PRODUCTS
|
EN ISO 4628-5:2016
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016)
|
EN 13523-4:2014
|
Coil coated metals - Test methods - Part 4: Pencil hardness
|
ISO 2409:2013
|
Paints and varnishes Cross-cut test
|
EN 13523-15:2015
|
Coil coated metals - Test methods - Part 15: Metamerism
|
EN 13523-2:2014
|
Coil coated metals - Test methods - Part 2: Gloss
|
ISO 1043-1:2011
|
Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
|
EN ISO 2808:2007
|
Paints and varnishes - Determination of film thickness (ISO 2808:2007)
|
ISO 4628-2:2016
|
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering
|
EN ISO 4618:2014
|
Paints and varnishes - Terms and definitions (ISO 4618:2014)
|
EN 10088-1:2014
|
Stainless steels - Part 1: List of stainless steels
|