• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM C 1193 : 2016

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Guide for Use of Joint Sealants
Available format(s)

Hardcopy , PDF

Superseded date

25-05-2023

Language(s)

English

Published date

13-01-2016

1.1This guide describes the use of a cold liquid-applied sealant for joint sealing applications. Including joints on buildings and related adjacent areas, such as plazas, decks, and pavements for vehicular or pedestrian use, and types of construction other than highways and airfield pavements and bridges. Information in this guide is primarily applicable to a single and multi-component, cold liquid-applied joint sealant and secondarily to a precured sealant when used with a properly prepared joint opening and substrate surfaces.

1.2An elastomeric or non-elastomeric sealant described by this guide should meet the requirements of Specification C834, C920, or C1311.

1.3This guide does not provide information or guidelines for the use of a sealant in a structural sealant glazing application. Guide C1401 should be consulted for this information. Additionally, it also does not provide information or guidelines for the use of a sealant in an insulating glass unit edge seal used in a structural sealant glazing application. Guide C1249 should be consulted for this information.

1.4Practice C919 should be consulted for information and guidelines for the use of a sealant in an application where an acoustic joint seal is required.

1.5This guide also does not provide information relative to the numerous types of sealant that are available nor specific generic sealant properties, such as hardness, tack-free time, or curing process, among others.

1.6The values stated in SI units are to be regarded as the standard. The values given in parenthesis are provided for information only.

1.7The Committee with jurisdiction for this standard is not aware of any comparable standards published by other organizations.

1.8This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

1.9The committee with jurisdiction over this standard is not aware of any comparable standards published by other organizations.

Committee
C 24
DocumentType
Guide
Pages
33
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM E 2435 : 2005 : R2020 Standard Guide for Application of Engineering Controls to Facilitate Use or Redevelopment of Chemical-Affected Properties
ASTM E 2266 : 2022 Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion
ASTM C 1564 : 2020 Standard Guide for Use of Silicone Sealants for Protective Glazing Systems
ASTM C 981 : 2020 Standard Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks
ASTM E 241 : 2020 Standard Guide for Limiting Water-Induced Damage to Buildings
ASTM E 3223/E3223M : 2020 Standard Guide for Specifying and Testing Field-Constructed Exterior Building Wall System Mockups in New Construction
ASTM C 1311 : 2014 Standard Specification for Solvent Release Sealants
ASTM C 1253 : 2014 : R2019 Standard Test Method for Determining the Outgassing Potential of Sealant Backing
ASTM C 920 : 2018 Standard Specification for Elastomeric Joint Sealants
ASTM C 1127/C1127M : 2015 Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface
ASTM E 2112 : 2019 : REV B Standard Practice for Installation of Exterior Windows, Doors and Skylights
ASTM C 1472 : 2016 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
ASTM C 898/C898M : 2009 : R2017 Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with Separate Wearing Course
ASTM E 2266 : 2011 Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion
ASTM C 919 : 2019 Standard Practice for Use of Sealants in Acoustical Applications
ASTM C 1736 : 2011 Standard Practice for Non-Destructive Evaluation of Adhesion of Installed Weatherproofing Sealant Joints Using a Rolling Device (Withdrawn 2020)
ASTM C 1242 : 2019 Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems
ASTM E 2435 : 2005 : R2015 Standard Guide for Application of Engineering Controls to Facilitate Use or Redevelopment of Chemical-Affected Properties
ASTM E 241 : 2009 : R2014 : EDT 1 Standard Guide for Limiting Water-Induced Damage to Buildings
ASTM C 1521 : 2013 Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
ASTM C 834 : 2017 Standard Specification for Latex Sealants
ASTM C 1564 : 2015 Standard Guide for Use of Silicone Sealants for Protective Glazing Systems
ASTM C 981 : 2005 : R2013 Standard Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks
ASTM C 1481 : 2012 : R2017 Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)
ASTM C 1401 : 2014 Standard Guide for Structural Sealant Glazing
ASTM C 717 : 2019 Standard Terminology of Building Seals and Sealants

ASTM C 1681 : 2018 Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain
ASTM C 1257 : 1994 Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
ASTM C 711 : 2022 Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
ASTM C 1382 : 2002 Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
ASTM C 1481 : 2011 Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)
ASTM C 792 : 2023 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
ASTM C 1401 : 1998 Standard Guide for Structural Sealant Glazing
ASTM C 1519 : 2010 Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM C 1184 : 2000 : REV A Standard Specification for Structural Silicone Sealants
ASTM C 1481 : 2012 Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)
ASTM C 1401 : 2009 Standard Guide for Structural Sealant Glazing
ASTM C 794 : 2018 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
ASTM E 2114 : 2005 Standard Terminology for Sustainability Relative to the Performance of Buildings
ASTM C 719 : 2022 Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
ASTM C 1083 : 2006 : R2020 : EDT 1 Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials
ASTM C 1442 : 2011 Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
ASTM C 1248 : 2004 Standard Test Method for Staining of Porous Substrate by Joint Sealants
ASTM C 1330 : 2002 : R2013 Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants
ASTM C 1241 : 2000 : R2009 Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
ASTM C 1472 : 2005 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
ASTM C 1401 : 2009 : REV A Standard Guide for Structural Sealant Glazing
ASTM D 2203 : 2001 : R2023 Standard Test Method for Staining from Sealants
ASTM C 1519 : 2004 Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM C 661 : 2015 : R2022 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
ASTM C 1184 : 2018 : EDT 1 Standard Specification for Structural Silicone Sealants
ASTM E 2114 : 2005 : REV A Standard Terminology for Sustainability Relative to the Performance of Buildings
ASTM C 1330 : 1996 Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid Applied Sealants
ASTM C 1521 : 2009 Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
ASTM E 2114 : 2019 Standard Terminology for Sustainability Relative to the Performance of Buildings
ASTM C 1401 : 2014 : R2022 Standard Guide for Structural Sealant Glazing
ASTM C 1253 : 1993 : R1998 Standard Test Method for Determining the Outgassing Potential of Sealant Backing
ASTM C 1241 : 2014 Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
ASTM C 1087 : 2023 Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
ASTM C 1472 : 2010 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
ASTM C 1265 : 1994 : R2011 Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
ASTM C 1253 : 2014 Standard Test Method for Determining the Outgassing Potential of Sealant Backing
ASTM C 1681 : 2014 Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain
ASTM C 1369 : 2007 Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
ASTM C 1330 : 2002 Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid Applied Sealants
ASTM C 1135 : 2000 : R2011 Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
ASTM C 1472 : 2006 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
ASTM C 1382 : 2011 Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
ASTM C 731 : 2015 : R2022 Standard Test Method for Extrudability, After Package Aging, of Latex Sealants
ASTM C 1401 : 2014 Standard Guide for Structural Sealant Glazing
ASTM C 1311 : 2002 Standard Specification for Solvent Release Sealants
ASTM C 1083 : 2006 : R2011 Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials
ASTM C 1216 : 1992 : R1997 Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
ASTM C 1472 : 2016 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
ASTM C 1184 : 2018 Standard Specification for Structural Silicone Sealants
ASTM C 1087 : 2000 Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
ASTM D 2453 : 2003 Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
ASTM D 2203 : 2001 : R2007 Standard Test Method for Staining from Sealants
ASTM C 731 : 2015 Standard Test Method for Extrudability, After Package Aging, of Latex Sealants
ASTM C 661 : 2015 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
ASTM C 1083 : 2006 : R2015 Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials
ASTM C 1265 : 1994 : R2005 : EDT 1 Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
ASTM C 834 : 2017 : R2023 Standard Specification for Latex Sealants
ASTM C 1311 : 1995 Standard Specification for Solvent Release Sealants
ASTM C 1241 : 2000 : R2005 Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
ASTM C 1248 : 2008 : R2012 Standard Test Method for Staining of Porous Substrate by Joint Sealants
ASTM C 1253 : 2014 : R2019 Standard Test Method for Determining the Outgassing Potential of Sealant Backing
ASTM D 412 : 2016 : EDT 1 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM C 1257 : 2006 Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
ASTM C 1330 : 2002 : R2007 Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid Applied Sealants
ASTM C 919 : 2022 Standard Practice for Use of Sealants in Acoustical Applications
ASTM C 1369 : 2019 Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
ASTM C 1135 : 2019 Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
ASTM C 1249 : 2006 Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
ASTM C 1253 : 1993 : R2009 Standard Test Method for Determining the Outgassing Potential of Sealant Backing
ASTM E 2114 : 2006 : REV A Standard Terminology for Sustainability Relative to the Performance of Buildings
ASTM C 1265 : 2017 Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
ASTM C 1248 : 2006 Standard Test Method for Staining of Porous Substrate by Joint Sealants
ASTM C 1521 : 2009 : EDT 1 Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
ASTM C 1369 : 2007 : R2014 Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
ASTM E 2114 : 2001 Standard Terminology for Sustainability Relative to the Performance of Buildings
ASTM C 1311 : 2010 Standard Specification for Solvent Release Sealants
ASTM C 1248 : 2022 Standard Test Method for Staining of Porous Substrate by Joint Sealants
ASTM C 1311 : 2014 Standard Specification for Solvent Release Sealants
ASTM C 1216 : 2003 : R2008 Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
ASTM C 1442 : 2014 : R2021 Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
ASTM C 1257 : 2006 : REV A Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
ASTM E 2114 : 2004 Standard Terminology for Sustainability Relative to the Performance of Buildings
ASTM C 1247 : 2014 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
ASTM C 1521 : 2008 Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
ASTM C 1247 : 2009 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
ASTM C 1519 : 2002 Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM D 2203 : 2001 : R2018 Standard Test Method for Staining from Sealants
ASTM E 2114 : 2017 Standard Terminology for Sustainability Relative to the Performance of Buildings
ASTM C 1184 : 2000 : REV A : EDT 1 Standard Specification for Structural Silicone Sealants
ASTM C 1135 : 2000 : R2005 Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
ASTM C 1472 : 2016 : R2022 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
ASTM C 732 : 2017 : R2022 Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
ASTM D 2203 : 1993 Standard Test Method for Staining from Sealants
ASTM C 1442 : 2014 Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
ASTM C 1247 : 1998 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
ASTM C 1249 : 2018 : R2023 Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
ASTM D 412 : 2016 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM C 1521 : 2002 Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
ASTM C 1442 : 2006 Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
ASTM D 2453 : 2015 Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
ASTM C 1135 : 2000 Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
ASTM C 794 : 2018 : R2022 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
ASTM C 1382 : 2005 Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
ASTM C 1135 : 2015 Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
ASTM C 711 : 2014 Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
ASTM D 2203 : 2001 : R2011 Standard Test Method for Staining from Sealants
ASTM E 2114 : 2023 Standard Terminology for Sustainability
ASTM C 1249 : 1993 Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
ASTM C 1521 : 2019 Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
ASTM D 2453 : 1999 Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
ASTM C 719 : 2014 : R2019 Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
ASTM C 1087 : 2016 Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
ASTM C 1521 : 2008 : REV A Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
ASTM C 1519 : 2002 : REV A Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM E 2114 : 2008 Standard Terminology for Sustainability Relative to the Performance of Buildings
ASTM C 732 : 2017 Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
ASTM C 1265 : 1994 : R1999 Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
ASTM D 2453 : 2015 : R2020 : EDT 1 Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
ASTM C 1257 : 2004 Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
ASTM C 1087 : 2000 : R2011 Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
ASTM C 1481 : 2000 Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)
ASTM C 1442 : 2003 Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
ASTM C 792 : 2015 : R2020 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
ASTM C 1521 : 2002 : REV A Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
ASTM C 793 : 2023 Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
ASTM E 2114 : 2006 Standard Terminology for Sustainability Relative to the Performance of Buildings
ASTM C 1519 : 2010 : R2017 Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM C 1481 : 2000 : R2006 Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)
ASTM C 1521 : 2019 : R2020 Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
ASTM C 1249 : 2018 Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
ASTM C 1481 : 2012 : R2017 Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)
ASTM C 1083:2006 Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials
ASTM C 1311 : 2022 Standard Specification for Solvent Release Sealants
ASTM C 1257 : 2015 Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
ASTM C 1472 : 2016 : EDT 1 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
ASTM C 1247 : 2020 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
ASTM C 1241 : 2014 : R2022 Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
ASTM C 1248 : 2018 Standard Test Method for Staining of Porous Substrate by Joint Sealants
ASTM C 1401 : 2002 Standard Guide for Structural Sealant Glazing
ASTM C 1382 : 1997 Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
ASTM C 1382 : 2004 Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
ASTM C 1401 : 2007 Standard Guide for Structural Sealant Glazing
ASTM C 510 : 2016 Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
ASTM D 412 : 2016 : R2021 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM C 1257 : 2006 : REV A : R2012 Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
ASTM C 1216 : 2003 Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
ASTM C 1369 : 1997 Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
ASTM C 1382 : 2016 Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
ASTM C 1369 : 2002 Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
ASTM C 1681 : 2009 Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain
ASTM E 2114 : 2021 Standard Terminology for Sustainability Relative to the Performance of Buildings
ASTM C 1265 : 2022 Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
ASTM C 1184 : 2005 Standard Specification for Structural Silicone Sealants
ASTM C 510 : 2016 : R2022 Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
ASTM C 1241 : 2000 Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
ASTM C 1521 : 2013 Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
ASTM C 793 : 2005 : R2017 Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
ASTM C 1442 : 1999 Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
ASTM C 1248 : 2008 Standard Test Method for Staining of Porous Substrate by Joint Sealants
ASTM C 1087 : 2000 : R2006 : EDT 1 Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
ASTM C 1087 : 2000 : R2006 Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
ASTM C 1083 : 2000 Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials
ASTM C 1472 : 2000 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
ASTM C 1519 : 2010 : R2022 Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM C 1184 : 2013 Standard Specification for Structural Silicone Sealants
ASTM E 2114 : 2000 : REV A Standard Terminology for Sustainability Relative to the Performance of Buildings
ASTM C 1184 : 2014 Standard Specification for Structural Silicone Sealants
ASTM C 1382 : 2016 : R2023 Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
ASTM D 2203 : 2001 Standard Test Method for Staining from Sealants
ASTM C 1248 : 1993 : R1998 Standard Test Method for Staining of Porous Substrate by Joint Sealants
ASTM C 1253 : 1993 : R2005 Standard Test Method for Determining the Outgassing Potential of Sealant Backing
ASTM D 2453 : 2003 : R2009 Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
ASTM C 1330 : 2018 Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants
ASTM C 1249 : 2006 : REV A Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
ASTM C 1249 : 2006 : REV A : R2010 Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications

View more information
£90.16
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.